• Clearwater Paper Corporation v. Graphic Packaging International LLCAll claims unpatentable
  PTAB · Sep 23, 2026 · IPR2025-00878 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–3 and 11 are unpatentable as anticipated by Cleveland and obvious over Nakagawa and over Nakagawa combined with Tanner.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “would have at least a bachelor’s degree in mechanical or chemical engineering, materials science, polymer science, or equivalent coursework, at least a year of experience developing paper-based laminates involving the application of polymer coatings to a substrate, and the appropriate industry familiarity with biodegradability standards and degradability techniques [and] . . . [l]ess work experience may be compensated by a higher level of education, such as a master’s degree, and vice versa. Pet. 16 (citing Ex. 1003 ¶ 50). Clearwater’s definition is uncontested, and we apply that definition here, as it accords with the level of skill reflected in the asserted prior art and the problems addressed in the specification of the ’126 patent. C. Claim Construction” slip op. at 6

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “We have reviewed the cited testimony of Clearwater’s expert, including their calculations for arriving at a coat weight in Nakagawa that falls within the claimed range. See Ex. 1003 ¶¶ 132–33. We find that testimony, which is unrebutted, both credible and supported by the evidence of record. Thus, in light of Clearwater’s contentions, the cited portions of Nakagawa, and the unrebutted testimony of Clearwater’s expert, we are persuaded that Nakagawa discloses or otherwise suggests each and every element of claim 1. See Pet. 45–54, 60–64. Clearwater also persuades us that Cleveland discloses the additional subject matter of dependent claims 2, 3, and 11. See Pet. 64–66. Thus, we determine that Clearwater demonstrates that claims 1–3 and 11 are unpatentable as obvious over Nakagawa. F. Ground 3—Obviousness Over Nakagawa and Tanner” slip op. at 17

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference is prior artDecided for petitioner

    “qualifies as prior art under 35 U.S.C. § 102(e)(1) “based on both its provisional and non-provisional filing dates.” Inst. Dec. 4 n.5. We were persuaded by Clearwater’s proof that Cleveland’s provisional (Ex. 1006) is “virtually identical” to Cleveland itself (Ex. 1005) and that the provisional provides written description support for at least claim 1 of Cleveland. See Pet. 18–21 (citing Ex. 1006, 2–6, 9). We were also persuaded by Clearwater’s showing that the provisional provides written support for the subject matter relied upon in Cleveland. Id. at 21–40 (citing Ex. 1006, 1–9). We are still persuaded by Clearwater’s showing. Thus, we see no reason to disturb our earlier finding that Cleveland is prior art to the ’126 patent.” slip op. at 7

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “protectant layers has “a coat weight of from 5 to 30 lbs/3000 ft2.” As noted by Clearwater, Cleveland discloses a total coat weight for layers 14 and 16 as falling within the claimed range. Pet. 32–34 (citing Ex. 1005 ¶ 32). In particular, Cleveland discloses that “the coextruded layer of copolyester (irrespective of which side of the substrate the layer is disposed) is of a total coat weight of between about 10 and about 40 lb/3000 ft2 in any combination of between about 80/20 to 20/80 parts by weight of Ecoflex to Biomax,” of which “a total coat weight of 25 lb/3000 ft2 is preferred.” Ex. 1005 ¶ 32. As disclosed, Cleveland’s total coat weight range of 10–40 lb/3000 ft2 falls almost entirely within the claimed range, and the preferred total coat weight of 25 lb/3000 ft2 falls squarely within the claimed range. Thus, Cleveland satisfies claim elements [1.3.2] and [1.5.2]. See Titanium Metals Corp. v. Banner, 778 F.2d 775, 782 (Fed. Cir. 1985) (“[W]hen, as by a recitation of ranges or otherwise, a claim covers several compositions, the claim is anticipated if one of them is in the prior art.”) (citation omitted). As such, we find that Clearwater adequately demonstrates that Cleveland discloses all the elements of claim 1. 4. Dependent Claims” slip op. at 12

  Patent outcomesUS 8,637,126 unpatentable
  § 102 anticipation§ 103 obviousnesscites Phillips
  Patents in suitUS 8,637,126
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 1–17 were not shown unpatentable because Petitioner failed to establish that Usui’s interconnect structure or Yu’s metal gate stacks satisfy the construed “electrode stack” limitation.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA” or “POSA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–82). Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 6–7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’562 patent and the asserted prior art, we maintain Petitioner’s definition for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “comprises the recited metals and has the recited thickness, which forms an electrical contact for use on a semiconductor device generally or a group III- V semiconductor in particular. This is consistent with our determination that “electrode stack” is a conductor that provides a path for current entering or leaving a medium such as a semiconductor device We disagree with Patent Owner that “electrode stack” as used in the challenged claims should be limited to the specific electrodes shown in the embodiments described in the Specification. See PO Resp. 4–9. Although the Specification describes embodiments using source, drain, and Schottky gate electrodes as electrical contacts, we see no reason to construe the term “electrode stack” itself to be limited to these components as Patent Owner proposes. Claims 1 and 13 expressly recite that electrode stacks comprise the claimed “electrical contact,” without expressly including or precluding any specific type of electrode. Ex. 1001, 5:54–63, 6:37–47. The Federal Circuit advises that the Specification “is not a substitute for, nor can it be used to rewrite, the chosen claim language. ‘Specifications teach. Claims claim.’” SuperGuide, 358 F.3d at 875 (quoting SRI Int’l v. Matsushita Elec. Corp. of Am., 775 F.2d 1107, 1121 n.14 (Fed. Cir. 1985) (en banc)). The Specification does teach electrical contacts that include source, drain, and Schottky gate electrodes, but claims 1 and 13 are directed to electrical contacts that are not expressly so limited. Patent Owner’s proposed construction would effectively rewrite the claim by adding limitations, which we decline to do under the guise of claim construction. See id. (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not a part of the claim.”). In view of the foregoing, we construe the claim term “electrode stack” to mean “a conductor that provides a path for current entering or leaving a medium such as a semiconductor device.”” slip op. at 17

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In contrast, Patent Owner’s declarant Dr. Piner testifies, with evidentiary support, that interconnects (such as Usui’s interconnect metallurgy structure) and electrical contacts (such as that claimed in the ’562 patent) are not the same thing. See Ex. 2024 ¶¶ 63–70. For example, Dr. Piner explains: In other words, not all metals in a semiconductor device have the same purpose and could not be said to be interchangeable. By August 2009 it was well known to a POSA how to discern if a metal component in a transistor is an interconnect or serves as an electrical contact such as a gate contact or ohmic contact, based on the structure and functionality of the metal component. For example, interconnects are made up of metal strips and are deposited on insulators. EX-1011 (Mishra) at 216. Interconnects are low resistance conductors that can carry very high current densities. Id., 216, 217. Unlike Schottky contacts and ohmic contacts, interconnects do not provide non-linear IV response like Schottky contacts nor inject electrons and holes into semiconductors like ohmic contacts. Id., 218. As many of the references cited by Dr. Zhao illustrate, electrical contacts had their own highly complex design challenges. EX-1008 (Pearton), 41-59 (Pages 53-71 of 383) (discussing electrical contacts); EX-1017 (Kramer), 11-126 (Pages 18-130 of 151) (same). And while Dr. Zhao cites these as supporting a POSA’s knowledge of an electrical contact, none of these references describe electrical contacts as interconnects. Id. ¶ 71. Dr. Piner further testifies that Usui’s interconnect metallurgy structure is an interconnect, and not an electrical contact, because “Usui states that ‘[t]he structures fabricated by the process of the present invention are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.’” Id. ¶ 148 (citing Ex. 1004, 1:11–14) (alteration in original); see also id. ¶¶ 150– 151 (Dr. Piner testifying that Usui’s interconnect metallization structure is not an “electrode stack” under a broad definition of electrode). Dr. Piner’s testimony in this regard rebuts Petitioner’s and Dr. Zhao’s conclusory assertions to the contrary.” slip op. at 21

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “conductor that provides a path for current entering or leaving a medium such as a semiconductor device.” Thus, Petitioner must show that Usui’s layers 13–15, 18, and 19 provide a path for current entering or leaving a medium such as a semiconductor device. After reviewing the complete trial record, we are not persuaded that Petitioner has done so. Petitioner relies on the testimony of Dr. Zhao to support its contention that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential).” slip op. at 21

  Patent outcomesUS 8,686,562 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,686,562
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 12, 2026 · IPR2025-00094 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1–16 were not shown unpatentable under any asserted obviousness ground because Petitioner failed to establish the proposed modifications and combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 5 (citing Ex. 1003 ¶¶ 67–69). Petitioner also argues that “[a]dditional education could substitute for professional experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. Accordingly, and because it appears to be consistent with the ’003 patent and the asserted prior art, we adopt Petitioner’s assessment of the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither party proposes construing any claim terms. Pet. 6; Prelim. Resp. 1–76. In addition, as discussed below, we are able to determine the outcome of this proceeding without expressly construing any terms. Thus, we do not construe any terms for the purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “challenged claim. Unigene Labs., Inc. v. Apotex, Inc., 655 F.3d 1352, 1360 (Fed. Cir. 2011). “This is so because inventions in most, if not all, instances rely upon building blocks long since uncovered, and claimed discoveries almost of necessity will be combinations of what, in some sense, is already known.” KSR, 550 U.S. at 418–419. On the other hand, an obviousness analysis “need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.” Id. at 418; accord In re Translogic Tech., Inc., 504 F.3d 1249, 1259 (Fed. Cir. 2007). However, a petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016). Instead, a petitioner must articulate a reason why a person of ordinary skill in the art would have combined or modified the prior art references. In re NuVasive, Inc., 842 F.3d 1376, 1382 (Fed. Cir. 2016); see also Metalcraft of Mayville, Inc. v. The Toro Co., 848 F.3d 1358, 1366 (Fed. Cir. 2017) (“In determining whether there would have been a motivation to combine prior art references to arrive at the claimed invention, it is insufficient to simply conclude the combination would have been obvious without identifying any reason why a person of skill in the art would have made the combination.”); Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.”) (citing InTouch Techs., Inc. v. VGO Commc’ns, Inc., 751 F.3d 1327, 1352 (Fed. Cir. 2014)). In arguing for the obviousness of claim 1 over the combination of Bonn and Mizuta, Petitioner argues that a person of ordinary skill in the art would have modified Bonn to perform high-frequency signal amplification. Pet. 19–25. In particular, Petitioner argues that a person of ordinary skill in the art “would have found it obvious to modify the circuit of Figure 1 [of Bonn] and use Figure 7’s structure for high frequency signal amplification in place of mixer 40,” followed by additional modifications to the circuit of Figure 1. Id. at 22–25. These additional modifications include removing LO port 55, removing FET 20 (along with voltage source 80, capacitors 16, 26, and 34, resistor 18, and inductors 22 and 24), removing capacitor 34 and shorting gate structure 324 to ground, and removing resistors 46 and 48 and shorting terminal 51 to ground. Id. According to Petitioner, the motivation for these modifications was that “Bonn . . . teaches using its dual gate structures for signal amplification without signal mixing.” Id. at 22 (citing Ex. 1006, 11:26–37). On the record developed at trial, we disagree. Bonn does, as Petitioner argues, teach that “the dual gate FET structure of the present invention can be tailored to provide superior performance over the prior art dual gate FET structures in high frequency signal mixing as well as other applications such as high frequency signal amplification.” Ex. 1006, 11:33–37. But the tailoring that Bonn refers to relates to changes to the structure of the field-effect transistor itself, not to the circuitry surrounding that transistor. Id. (teaching that the reason that “the dual gate FET structure of the present invention can be tailored” is that “the parameters such as gate width, dopant concentration, and channel depth, under each gate of the dual gate FET are individually adjusted for optimum performance”). Thus, although Bonn might have motivated a person of ordinary skill in the art to have made changes to the dual-gate FET itself, we are not persuaded that it would have motivated the additional changes to the circuit of Bonn’s Figure 1.” slip op. at 11

  • Strike new argumentNew argument disregardedDecided for patent owner

    “Mishra’s Figure 5 is a second gate in favor of a new position. Petitioner’s new argument is that a person of ordinary skill in the art would have found it obvious to connect the field plate of Mishra’s Figure 5 to the source instead of the gate, converting the field plate into a second gate. Compare Pet. 83 (equating “drain side gate” with “field plate 66, Figure 5”), 86–88 (identifying field plate 66 as a “second gate”), with Reply 21–22 (identifying only the embodiment of Mishra’s Figure 10 as a source-connected field plate), 22–23 (arguing that Mishra teaches that the Figure 5 embodiment “could be arranged as ‘a single transistor with a dual gate structure’”). Although “the introduction of new evidence in the course of the trial is to be expected in inter partes review trial proceedings,” Genzyme Therapeutic Prods. LP v. Biomarin Pharm. Inc., 825 F.3d 1360, 1366 (Fed. Cir. 2016), the shifting of arguments is not, Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). Accordingly, Petitioner’s change of arguments here is inappropriate. Moreover, even if we were to consider Petitioner’s inappropriate new argument, we would conclude that Petitioner does not support the argument with sufficient evidence. “Whether [an obviousness ground] is based on combining disclosures from multiple references, combining multiple embodiments from a single reference, or selecting from large lists of elements in a single reference, there must be a motivation to make the combination and a reasonable expectation that such a combination would be successful, otherwise a skilled artisan would not arrive at the claimed combination.” In re Stepan, 868 F.3d 1342, 1346 n.1 (Fed. Cir. 2017). Petitioner’s new argument relies on a person of ordinary skill in the art modifying the Figure 5 embodiment of Mishra to connect the field plate to the source rather than the gate. Reply 21–24. Petitioner does not, however, show that a person of ordinary skill in the art would have had a motivation to make this modification or a reasonable expectation that this combination would be successful. Id. Petitioner argues instead that “[n]o ‘reason’ is needed.” Id. at 24. Thus, Petitioner does not show by a preponderance of the evidence that claim 1 would have been obvious over the combination of Mishra and Ren.” slip op. at 19

  Patent outcomesUS 8,264,003 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,264,003
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

  The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

  • BurdenNot shown unpatentable

    “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artOther

    “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

  Patent outcomesUS 9,421,713 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,421,713
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00311 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1, 3–11, and 17–22 are unpatentable as obvious over grounds using Mazumder and Mori; grounds relying on Henke fail because Henke is not analogous art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printers including remote control of rapid fabrication systems.” Pet. 6 (citing Ex. 1003 ¶¶ 40–42). Petitioner also argues that “[a]dditional years of experience could substitute for an advanced-level degree (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” PO Resp. 11–12. Neither party explains why the outcome of this case would be affected by the adoption of either of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “There is also evidence that supports Petitioner’s proposed construction, under which a user interface may display both the image and the projection if it displays them at different times. This evidence includes statements in the specification that describe displaying an image “instead” of “a rendering of a three-dimensional model” and that describe displaying a “video image and/or model projection” rather than merely a video image and a model projection. Ex. 1001, 22:43–53, 24:52–55, Figs. 5, 7. It also includes arguments in the prosecution history distinguishing Taminger on the basis of failure of disclose any display of both an image and a projection at all, rather than on the basis of failure to disclose simultaneous display of both visualizations. Ex. 1002, 160, 161. Based on our review of all the probative evidence, we find that the preponderance of the evidence supports Petitioner’s view, so we construe the challenged claims as not requiring simultaneous display of the image and the projection.” slip op. at 15

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “With the problem solved by the ’324 patent defined as monitoring automated three-dimensional fabrication processes, we find that Mori is at least reasonably pertinent to the problem. Mori discloses “[a] machining status monitoring apparatus.” Ex. 1005, code (57), ¶ 43. That apparatus uses “actual CCD cameras . . . to image the workpiece.” Id. ¶ 49. It also has a “virtual image generating section” with “virtual CCD cameras” having “view points” that “match the view points of the actual CCD cameras.” Id. ¶¶ 59, 61, 62. This disclosure relates quite closely to monitoring an automated three-dimensional fabrication process and thus is at least reasonably pertinent to solving that problem. d) Conclusion For the reasons discussed above, Mori is both in the same field as the ’324 patent and at least reasonably pertinent to the problem solved by the ’324 patent. Accordingly, it is analogous art to the ’324 patent.” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Regarding combining the teachings of Mazumder with those of Mori, the evidence of record shows that the print head of Mazumder’s three-dimensional printer could obscure portions of the actual camera’s view of the object being printed and that displaying Mori’s virtual image of the object in addition to Mazumder’s actual image of the object “would have allowed the user to of the remote computer to monitor the progress of the object even when the actual view of the object is partially or totally obscured.” Ex. 1003 ¶ 86. c) Conclusion Regarding Claim 1 For the reasons discussed above, the preponderance of the evidence shows that claim 1 would have been obvious over the combination of Mazumder and Mori.” slip op. at 26

  Patent outcomesUS 8,562,324 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,562,324
• Dr. Squatch, LLC v. The Procter & Gamble CompanyAll claims unpatentable
  PTAB · Jan 28, 2026 · IPR2024-01174 · APJ Susan L C Mitchell · IPR · Final written decision

  Claims 1–8 and 10–23 are unpatentable: the Board found claims 1–15 anticipated or obvious over the asserted grounds and claims 16–23 obvious over the Native combination.

  RulingsFinal written decision

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedOther

    “argument that the prior art fails to enable a stable deodorant stick. Rather, we are persuaded by Petitioner that Lesniak sufficiently teaches compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Reply 6–7 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a second wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that Lesniak teaches how to make stable compositions by including a secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Id. Ex. 1086 ¶ 7; see also Reply 6 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32).” slip op. at 22

  • Skill levelSkill level petitioner adoptedOther

    “Petitioner proposes that a person of ordinary skill in the art (“POSA” or “POSITA”) at the time of the invention “would have (1) at least a B.S. or equivalent degree; and (2) at least two years of experience in cosmetics formulations.” Pet. 17 (citing Ex. 1002 ¶¶ 27–29). Patent Owner does not dispute Petitioner’s proposal about the POSA’s qualifications at this stage of the proceeding. PO Resp. 10. For this Decision, we adopt and apply Petitioner’s proposal above, which does not appear to be inconsistent with the level of skill reflected in the asserted prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner

    “Patent Owner asserts that the preamble of independent claim 1, 16, and 20 reciting “a deodorant stick” is limiting” as it provides antecedent basis for the recitation of “said deodorant stick being free of an aluminum salt” for each independent claim. PO Resp. 7–10. Patent Owner also points to dependent claims 6–9 as relying on the preamble reciting “a deodorant stick” as antecedent basis for claim elements. Id. at 9. We agree. Petitioner does not provide argument to the contrary. See, e.g., Pet. 19 (arguing that Lesniak discloses a deodorant stick in the form of an antiperspirant stick). We determine that no express construction of any claim term is necessary to determine whether to institute inter partes review. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). To the extent further discussion of the meaning any claim term is necessary to our decision, we provide that discussion below in our analysis of the asserted grounds of unpatentability.” slip op. at 8

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “We find that the evidence of record fails to support Patent Owner’s argument that the prior art fails to enable a stable deodorant stick. Rather, we are persuaded by Petitioner that Lesniak sufficiently teaches compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Reply 6–7 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a second wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that Lesniak teaches how to make stable compositions by including a secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Id. Ex. 1086 ¶ 7; see also Reply 6 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32). Having considered the parties’ positions and evidence of record, summarized above, we determine that Lesniak provides sufficient disclosure to enable a person of ordinary skill in the art to formulate deodorant stick within the parameters of claim 1. Therefore, for the reasons discussed above, we conclude that Petitioner has proved by a preponderance of evidence that Lesniak anticipates claim 1.” slip op. at 22

  Patent outcomesUS 11,497,706 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 11,497,706
• Dr. Squatch, LLC v. The Procter & Gamble CompanyAll claims unpatentable
  PTAB · Jan 28, 2026 · IPR2024-01173 · APJ Susan L C Mitchell · IPR · Final written decision

  Claims 1–7, 9–13, and 16–19 are unpatentable: claims 16–17 are anticipated by Lesniak, and the remaining challenged claims are obvious over the stated combinations.

  RulingsFinal written decision

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “argument that the Lesniak fails to enable a stable deodorant stick. Rather, we are persuaded by Petitioner that Lesniak sufficiently teaches compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Pet. Reply 8 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a second wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Ex. 1086 ¶ 7; see also Reply 8 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32).” slip op. at 22

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Level of Ordinary Skill in the Art Petitioner proposes that a person of ordinary skill in the art (“POSA” or “POSITA”) at the time of the invention “would have (1) at least a B.S. or equivalent degree; and (2) at least two years of experience in cosmetics formulations.” Pet. 24 (citing Ex. 1002 ¶¶ 27–28). Patent Owner does not dispute Petitioner’s proposal about the POSA’s qualifications. See generally PO Resp. We adopt and apply Petitioner’s proposed definition of a POSA, which is consistent with the level of skill reflected in the asserted prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner

    “Patent Owner asserts that the preamble of independent claim 1 reciting “a deodorant stick” is limiting” as it provides antecedent basis for certain other claim elements, specifically, for the recitation of “said deodorant stick being free of an aluminum salt” and “said deodorant stick” having a particular hardness range. PO Resp. 8–9. Patent Owner also points to dependent claims 5–8 as relying on the preamble reciting “a deodorant stick” as antecedent basis for claim elements. Id. at 10. We agree.” slip op. at 8

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “We find that the evidence of record fails to support Patent Owner’s argument that the Lesniak fails to enable a stable deodorant stick. Rather, we are persuaded by Petitioner that Lesniak sufficiently teaches compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Pet. Reply 8 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a second wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Ex. 1086 ¶ 7; see also Reply 8 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32). Having considered the parties’ positions and evidence of record, summarized above, we determine that Lesniak provides sufficient disclosure to enable a person of ordinary skill in the art to formulate a deodorant stick within the parameters of claims 16 and 17. e) Conclusion as to Claims 16 and 17 We agree with Petitioner that “the challenged claims recite nothing more than well-known deodorant ingredients performing their conventional functions.” Pet. Reply 2. Therefore, for the reasons discussed above, we conclude that Petitioner has proved by a preponderance of evidence that Lesniak anticipates claims 16 and 17.” slip op. at 22

  Patent outcomesUS 10,905,647 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,905,647
• Dr. Squatch, LLC v. The Procter & Gamble CompanyAll claims unpatentable
  PTAB · Jan 26, 2026 · IPR2024-01105 · APJ Sheridan K Snedden · IPR · Final written decision

  Claims 1–15 are unpatentable: claims 1, 3–8, and 11–14 as anticipated by Lesniak; claims 2, 9, 10, and 15 as obvious over the respective asserted combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner proposes that a person of ordinary skill in the art (“POSA” or “POSITA”) at the time of the invention “would have (1) at least a B.S. or equivalent degree; and (2) at least two years of experience in cosmetics formulations.” Pet. 27 (citing Ex. 1002 ¶¶ 26–28). Patent Owner does not dispute Petitioner’s proposal about the POSA’s qualifications. PO Resp. 7– 8. We adopt and apply Petitioner’s proposed definition of a POSA, which does not appear to be inconsistent with the level of skill reflected in the asserted prior art.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner

    “Patent Owner asserts that the preamble of independent claim 1 reciting “a deodorant stick” is limiting” as it provides antecedent basis for certain other claim elements, specifically, for the recitation of “said stick range. PO Resp. 8–10. We agree. Petitioner does not provide argument to the contrary. See, e.g., Pet. 27 (arguing that Lesniak discloses a deodorant stick in the form of an antiperspirant stick).” slip op. at 6

  • Expert testimonyPetitioner expert creditedDecided for petitioner
  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “disclosure to enable a person of ordinary skill in the art to formulate deodorant stick within the parameters of claim 1. d) Conclusion as to claim 1 Having considered the parties’ positions and evidence of record, summarized above, we are persuaded by Petitioner’s analysis that Lesniak discloses all elements of claim 1. We are not persuaded to Patent Owner’s arguments to the contrary. Accordingly, we determine that Lesniak anticipates claim 1.” slip op. at 20

  Patent outcomesUS 10,966,915 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,966,915
• Dr. Squatch, LLC v. The Procter & Gamble CompanyAll claims unpatentable
  PTAB · Jan 21, 2026 · IPR2024-01104 · APJ Sheridan K Snedden · IPR · Final written decision

  Claims 1–18 are unpatentable under § 103: claims 1–7, 9–13, and 15–18 over Lesniak, Phinney, and Bianchi ’518; claim 8 adds Lamb; claim 14 adds Bianchi ’254; and claims 1–18 are also unpatentable over the …

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner

    “Patent Owner asserts that the preamble of independent claim 1 reciting “a deodorant stick” is limiting” as it provides antecedent basis for certain other claim elements, specifically, for the recitation of “said stick being free of an aluminum salt” and “said stick” having a particular hardness range. PO Resp. 8–9. We agree. Petitioner does not provide argument to the contrary. See, e.g., Pet. 30 (arguing that Lesniak discloses a deodorant stick in the form of an antiperspirant stick). We determine that no express construction of any other claim term is necessary to resolve the dispute between the parties. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). To the extent further discussion of the meaning any claim term is necessary to our decision, we provide that discussion below in our analysis of the asserted grounds of unpatentability.” slip op. at 7

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner proposes that a person of ordinary skill in the art (“POSA”) at the time of the invention “would have (1) at least a B.S. or equivalent degree; and (2) at least two years of experience in cosmetics formulations.” Pet. 24 (citing Ex. 1002, ¶¶ 26–28). Patent Owner does not dispute Resp. We adopt and apply Petitioner’s proposed definition of a POSA, which is consistent with the level of skill reflected in the asserted prior art.” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “We have considered Patent Owner’s arguments but find, on this record, Petitioner to have the better position. In particular, we are persuaded that a POSA would have been motivated to add magnesium hydroxide to Lesniak’s compositions because Phinney teaches that: (i) zinc oxide has “low activity” as a “deodorant agent”; (ii) magnesium hydroxide is “an effective synergistic effects, hence motivating a POSA to add magnesium hydroxide to Lesniak’s zinc oxide deodorants. Ex. 1004, 1:13- 3:16, 5:61-67. Reply 10; see also PO Resp. 25–26 (arguing that a POSA would have found it obvious to add magnesium hydroxide to the composition of Lesniak because zinc oxide is not a particularly efficacious antimicrobial in deodorants when used alone, whereas magnesium hydroxide is an effective deodorant). We acknowledge that Phinney suggests mixing zinc oxide with water in order to convert zinc oxide to zinc hydroxide. See, e.g., Ex. 1004, 1:17– 19 (“It was also found that a mixture of the hydroxides of zinc and magnesium could provide long lasting protection against odour due to perspiration.”). The evidence of record, however, shows that both magnesium hydroxide and zinc oxide were known options for deodorant antimicrobials, and claim 1 does not require a minimal level of effectiveness such that the combination of magnesium hydroxide and zinc oxide would need to outperform any other combination including the mixture of zinc and magnesium hydroxides. See In re Fulton, 391 F.3d 1195, 1200 (Fed. Cir. 2004) (“Our case law does not require that a particular combination must be the preferred, or the most desirable, combination[.]”). Here, we also credit the testimony of Dr. Michniak-Kohn that “POSA would understand that the water-based vs. anhydrous distinction is not relevant, as a POSA would understand that magnesium hydroxide would still function as an antimicrobial in anhydrous compositions such as those disclosed by Lesniak.” Ex. 1086 ¶ 9 (citing Ex. 1072, 1-2, 5 (disclosing deodorants without added water and with zinc oxide and/or magnesium hydroxide)). Accordingly, we are persuaded by Petitioner that “a POSA would have been” slip op. at 22

  • Obviousness (§103) › KSR rationalesMotivation foundUnpatentable

    “teaches baking soda as an effective ingredient in a deodorant. Ex. 1005, 131–33. Baking soda is also known to cause irritation that may motivate some to remove it from deodorants. See Ex. 2011 ¶ 109–110. Thus, the specific set of advantages and disadvantages for using baking soda in a deodorant was known to a person of skill in the art. On this record, the inclusion or exclusion of baking soda presents no unexpected result and the evidence of record establishes that it would have been an obvious matter of design choice within the skill of the art to balance the advantages and disadvantages associated therewith. See Medichem, S. A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine”); see also Winner Int’l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n. 8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit, however, should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another.”) In view of the above, we determine that the preponderance of the evidence supports Petitioner’s argument that claim 8 would have been obvious over the combination of Lesniak, Phinney, Bianchi ’518, and Lamb. Accordingly, we determine that claim 8 is obvious by the combination of Lesniak, Phinney, Bianchi ’518, and Lamb.” slip op. at 32

  Patent outcomesUS 11,540,999 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,540,999
• Google LLC v. 138 East LCD Advancements LimitedAll claims unpatentable
  PTAB · Dec 19, 2025 · IPR2024-00959 · APJ George R Hoskins · IPR · Final written decision

  Claims 1–10 are unpatentable: claims 1–8 as obvious and claim 9 as anticipated and obvious over the stated prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner does not dispute the level of [ordinary] skill . . . set forth in the Petition.” PO Resp. 14; Ex. 2001 ¶¶ 20–21. We adopt Petitioner’s unopposed assessment of ordinary skill, as it appears to be consistent with the ’082 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “We discuss the scope of the term “specification data” in claim 1 below in Section III.D.3(b)(v) when comparing the claim with Fisher. We construe the term “image processing control data” in claim 1 below in Section III.E.2(e)(i) when comparing the claim with Ohga. Otherwise, based on the arguments and evidence presented, we determine no explicit construction is needed to resolve the parties’ controversy. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundMotivation foundDecided for petitioner

    “Dr. Papanikolopoulos’s testimony that Kuwata teaches away from modifying its camera 22 to access an external server (such as Fisher’s Internet-enabled external data source) by stressing advantages of a self-contained camera-printer pair without external dependencies. See PO Resp. 15–16, 26–28 (citing Ex. 1005 ¶¶ 75, 77); Ex. 2001 ¶¶ 61–64. The cited disclosures in Kuwata simply do not discuss any advantages arising from a self-contained camera-printer pair without external dependencies, or any disadvantages arising from connecting camera 22 to an Internet server. See Ex. 1005 ¶¶ 75, 77. The cited disclosures instead tout the advantages arising from a camera manufacturer (rather than an end user photographer) specifying the image output control information CI for a specific camera-printer pairing, to reduce differences between an image as confirmed by the end user on the camera’s display and the image outputted by the printer. See id. That advantage, however, has nothing to do with whether camera 22 may or may not communicate with an Internet server. Indeed, rather than being self-contained as Patent Owner and Dr. Papanikolopoulos would have it, we find Kuwata’s camera 22 includes an I/O port for wired or wireless communication to transmit the camera’s image files GF / 10 to various printers 24 and various personal computers (PCs). See Ex. 1005, Fig. 4, ¶¶ 81, 85; Ex. 1003 ¶ 84; Pet. 14. Thus, Kuwata allows for and does not discourage communication between camera 22 and an Internet server such as Fisher’s external data source. In particular, Kuwata does not detract from the benefits of updating image output control information CI after the camera is manufactured, for example so that the camera can be paired with printers that were not yet on the market when the camera was manufactured. Moreover, Fisher recognizes that “a manufacturer may create various ancillary data files 418, and make the ancillary data files 418 available on a distributed computer network like the Internet for subsequent downloading and utilization by camera device 110.” Ex. 1006 ¶¶ 42, 55. That teaching in Fisher dovetails with Kuwata’s disclosure concerning camera manufacturers optimizing their cameras with various different printers, supporting Petitioner’s combination. See Ex. 1003 ¶¶ 84–89, 102–108.” slip op. at 27

  Patent outcomesUS 7,428,082 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,428,082

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.