- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentablePTAB · Mar 5, 2026 · IPR2024-00634 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1, 3, 8–13, 15, 16, and 19–24 are unpatentable over Brown and Ho, with claims 16 and 19 also relying on the Quick Connection Art; the remaining challenged claims were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Patent Owner proposes that: A [person of ordinary skill in the art (“POSITA”)] in the field to which the ’105 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“of “integrally molded with” as “molded together as a single structure.” Paper 21, 15.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Patent Owner responds that: a POSITA would not have been motivated to make the proposed modification, nor does the Petition include any analysis regarding why a POSITA would be motivated to move from a vertical extended portion to a radial extended portion. Indeed, a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar as it introduces another sudden directional change into the fluid flow system. PO Resp. 58–59 (citing Ex. 2013 ¶ 242).” slip op. at 32
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner
“Patent Owner argues that the ’105 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 63–65; PO Sur-reply 26–29. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 of the bowl fill valve 109, the flow of water through the bowl fill valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288. Further, the ’606 Application states: The bowl fill valve 109 may be, for example, a ball valve, a gate valve, a globe valve, a plug valve, a diaphragm valve, a butterfly valve, a needle valve, a sliding gate, a quick turn valve, a knife valve or any other appropriate type of valve as can be appreciated by those with ordinary skill in the art.” slip op. at 42
Patent outcomesUS 9,103,105 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 9,103,105 - PTAB · Dec 19, 2025 · IPR2025-01078 · APJ Robert L Kinder · IPR · Institution
The Board instituted IPR on claims 1, 2, 4–12, 14–22, and 24–30, finding a reasonable likelihood that Kido anticipates at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314(b); 37 C.F.R. § 42.4(a) (2024). An inter partes review may not be instituted “unless. . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Moreover, a decision to institute under 35 U.S.C. § 314 may not institute on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 584 U.S. 357, 371 (2018).” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“At this juncture in the proceeding, and based on the current record, we do not agree with Patent Owner that “payout,” as claimed, should be limited to “the amount a player will win in relation to the amount wagered.” We recognize, as Patent Owner points out, that the examples provided in the Specification are listed in odds format. See id. at 2. The Specification, however, also states that “[a]ny suitable payouts can be used in some embodiments.” Ex. 1011, 5:18–21. This language suggests a broader interpretation of “payout” beyond just payout odds and we therefore decline to import the wager limitation into the claim term. Although the ’371 patent generally describes payouts in terms of odds, like 49:1, the intrinsic record lacks clear evidence necessary to limit the claims as Patent Owner proposes.” slip op. at 8
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner proposes “a person having at least a Bachelor’s Degree in electrical engineering, computer science, or computer engineering, or undergraduate training in an equivalent field and at least two years of relevant experience in electronic gaming technology.” Pet. 10 (citing Ex. 1003 ¶¶ 22–26). Petitioner further notes that “[a]dditional graduate education could substitute for professional experience, and significant work experience could substitute for formal education.” Id. Patent Owner does not dispute this level of skill. See Prelim. Resp. 13–14 (“Evolution does not set forth an alternative level of skill for a person of ordinary skill in the art”). For purposes of this Decision, we adopt Petitioner’s proposal, which comports with the teachings of the ’371 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 11
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“Based on the evidence before us, we find persuasive Petitioner’s contention that Kido’s accumulated jackpot paid when landing on a star mark reads on the claimed “a first selected position . . . to have an increased payout . . . greater than a first non-selected payout.” See Pet. 25–27, 30, 35, 36. As explained above, the current record does not support limiting the term “payout” to just the amount a player will win in relation to the amount wagered. As Petitioner notes, a payout that receives Kido’s accumulated Prog bonus payout is necessarily higher than a payout that does not receive the Prog bonus. Pet. 35–36 (“had the first selected position not been randomly selected, the player would only be eligible for the basic payout”). Further, Kido even describes its bonus routines and jackpots as payouts. Kido describes, for example, that “[w]hen the privilege unit 113 obtains the win information from the special game value award mark win determining unit 112, it awards, as a payout, the game value stored in the accumulated game value memory 117” and it describes the “jackpot (JP) amount” as “a special payout.” Ex. 1007 ¶¶ 119, 129.” slip op. at 14
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 11,756,371 - PTAB · Dec 17, 2025 · IPR2025-01072 · APJ Frederick C Laney · IPR · Institution
The Board instituted review of claims 1–3, 5–11, 13–19, and 21–24 on all asserted grounds, finding a reasonable likelihood that Kido anticipates claims 1, 9, and 17.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314(b); 37 C.F.R. § 42.4(a) (2024). An inter partes review may not be instituted “unless. . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Moreover, a decision to institute under 35 U.S.C. § 314 may not institute on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 584 U.S. 357, 371 (2018).” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“At this juncture in the proceeding, and based on the current record, we do not agree with Patent Owner that “payout,” as claimed, should be limited to “the amount a player will win in relation to the amount wagered.” Sur-reply 2. We recognize, as Patent Owner points out, that the examples provided in the Specification are listed in odds format. See id. The Specification, however, also states that “[a]ny suitable payouts can be used in some embodiments.” Ex. 1001, 5:16–17. This language suggests a broader interpretation of “payout” beyond just payout odds and we therefore decline to import the wager limitation into the claim term. Although the ’014 patent generally describes payouts in terms of odds, like 49:1, the intrinsic record lacks clear evidence necessary to limit the claims as Patent Owner proposes.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Reference is prior artInstituted
“Based on the evidence before us, we find persuasive Petitioner’s contention that Kido’s accumulated jackpot paid when landing on a star mark reads on the claimed “first payout . . . wherein the first payout is higher.” See Pet. 32–36. As explained above, the current record does not support limiting the term “payout” to just the amount a player will win in relation to the amount wagered. As Petitioner notes, a first payout that receives Kido’s accumulated Prog bonus payout is necessarily higher than a second payout that does not receive the Prog bonus. Id. at 35. Further, Kido even describes its bonus routines and jackpots as payouts. Kido describes, for example, that “[w]hen the privilege unit 113 obtains the win information from the special game value award mark win determining unit 112, it awards, as a payout, the game value stored in the accumulated game value memory 117” and it describes the “jackpot (JP) amount” as “a special payout.” Ex. 1007 ¶¶ 119, 129.” slip op. at 14
Claim construction§ 102 anticipationcites PhillipsPatents in suitUS 11,011,014 - PTAB · Dec 16, 2025 · IPR2025-01073 · APJ Robert L Kinder · IPR · Institution
The Board instituted IPR of claims 1–5, 7–12, 14–18, and 20 on all petitioned grounds, finding a reasonable likelihood that Kido anticipates at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314(b); 37 C.F.R. § 42.4(a) (2024). An inter partes review may not be instituted “unless. . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Moreover, a decision to institute under 35 U.S.C. § 314 may not institute on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 584 U.S. 357, 371 (2018).” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“At this juncture in the proceeding, and based on the current record, we do not agree with Patent Owner that “payout,” as claimed, should be limited to “the amount a player will win in relation to the amount wagered.” We recognize, as Patent Owner points out, that the examples provided in the Specification are listed in odds format. See id. at 2. The Specification, however, also states that “[a]ny suitable payouts can be used in some embodiments.” Ex. 1005, 5:13–17. This language suggests a broader interpretation of “payout” beyond just payout odds and we therefore decline to import the wager limitation into the claim term. Although the ’024 patent generally describes payouts in terms of odds, like 49:1, the intrinsic record lacks clear evidence necessary to limit the claims as Patent Owner proposes.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“Based on the evidence before us, we find persuasive Petitioner’s contention that Kido’s accumulated jackpot paid when landing on a star mark reads on the claimed “first payout . . . wherein the first payout is higher.” See Pet. 33–35. As explained above, the current record does not support limiting the term “payout” to just the amount a player will win in relation to the amount wagered. As Petitioner notes, a first payout that receives Kido’s accumulated Prog bonus payout is necessarily higher than a second payout that does not receive the Prog bonus. Pet. 35. Further, Kido even describes its bonus routines and jackpots as payouts. Kido describes, for example, that “[w]hen the privilege unit 113 obtains the win information from the special game value award mark win determining unit 112, it awards, as a payout, the game value stored in the accumulated game value memory 117” and it describes the “jackpot (JP) amount” as “a special payout.” Ex. 1007 ¶¶ 119, 129. Patent Owner next contends that Kido does not disclose a first payout that is “for the spin of the roulette wheel.” Prelim. Resp. 29. Patent Owner’s argument is premised on the cumulative nature of Kido’s Prog bonus – it builds with every spin of the roulette wheel until won. Id. (“Each time the wheel is spun, 0.5% of the amount wagered is added to the progressive jackpot, and thus, the jackpot’s value reflects multiple spins of the roulette wheel.”). Thus, according to Patent Owner, the value of the jackpot is determined using multiple spins of the roulette wheel and is not “for a spin of the roulette wheel” as claimed.” Id. at 30. The claims, however, only require a first payout that is higher than a second payout. Nothing prohibits the higher payout from accumulating from prior spins of the roulette wheel because, when it is actually won, it will be for that last spin of the roulette wheel. Ex. 1005, 8:35–36 (“indicating that the first player is to be paid at the first payout for the spin of the roulette wheel”). Regardless of how Kido’s Prog bonus accumulated, it is paid for a spin of the roulette wheel – at that juncture Kido discloses each claim element. Anticipation occurs when a prior art reference discloses every element of a patent claim at a point in time, as Kido does with a single spin of the roulette wheel that pays the Prog bonus. As persuasively explained by Petitioner, “the steps of Figure 12 (including A13) occur within a single round of roulette, for a single spin of the roulette wheel, until the routine ‘returns to the step of A1 and is transited to a next game.’” Pet. 39 (quoting Ex. 1007 ¶ 233).” slip op. at 13
Claim construction§ 102 anticipationcites PhillipsPatents in suitUS 10,629,024 - Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentablePTAB · Dec 15, 2025 · IPR2024-00633 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1, 7–15, 19, and 20 are unpatentable over Brown and Ho; claims 2–6 and 16–18 were not shown unpatentable on the asserted grounds.
RulingsFinal written decision- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“Brown’s adapter tube 23 (i.e., the extended portion) does not extend radially from a longitudinal axis of valve assembly 13 (i.e., the toilet fill valve). Ex. 1021, Fig. 1. Mr. Jobin testifies that a POSITA would not be motivated to move adapter tube 23 from a vertical position to a radial position because “a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar system.” Ex. 2013 ¶ 251; see Ex. 1021, 1:9–62. Patent Owner’s argument is persuasive. Petitioner’s analysis and Dr. Cameron’s testimony is conclusory and does not sufficiently explain why a POSITA would be motivated to make the proposed modification to Brown. For example, Petitioner does not sufficiently explain how such a modification would result in a more compact toilet fill valve system that could be adapted to fit in more toilet tank designs. Further, neither Petitioner nor Dr. Cameron sufficiently address Mr. Jobin’s testimony regarding Brown’s desire for a quieter toilet. See Pet. Reply 23; Ex. 1036 ¶ 84. Petitioner fails to meet its burden to show by a preponderance of the evidence that claim 2 is unpatentable over Brown and Ho.” slip op. at 35
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner
“description is an objective inquiry into the four corners of the specification from the perspective of a POSA. Using this test, the invention must be described in a manner sufficient to demonstrate that the inventor actually invented the claimed invention. Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010). “One shows that one is ‘in possession’ of the invention by describing the invention, with all its claimed limitations, not that which makes it obvious.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). Written description is a question of fact judged as of the relevant filing date. Falko–Gunter Falkner v. Inglis, 448 F.3d 1357, 1363 (Fed. Cir. 2006). An ipsis verbis disclosure, however, is not necessary to satisfy the written description requirement. Vas–Cath Inc. v. Mahurkar, 935 F.2d 1555, 1563 (Fed. Cir. 1991). The disclosure need only reasonably convey to a POSA that the inventor had possession of the subject matter in question, even if every nuance of the claims is not explicitly described in the specification. Id.; see Ariad, 598 F.3d at 1351. Patent Owner argues that the ’993 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 68; PO Sur-reply 28–30. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. Ex. 1012, 47, ¶ 8 (emphasis added); see also Ex. 1001, 2:28–39. As can be seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288.” slip op. at 48
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artNot shown unpatentable
“1. Analysis of Claims 1–18 Schuster is available as prior art if the ’993 patent is only entitled to its January 27, 2014, filing date and not entitled to claim priority to earlier filing dates of the parent applications. On its face, the ’993 patent claims priority to a number of earlier parent applications, including Application No. 12/786,904 (the ’904 Application) filed May 25, 2010, and the Application code 63. Petitioner contends that the ’993 patent is not entitled to claim priority to the filing date of the earlier parent applications, and, thus, Schuster, a parent application of the ’993 patent, is available as prior art.15 Pet. 91–92. Petitioner alleges that the earlier parent applications, specifically Application No. 12/786,904 (the ’904 Application), do not provide written description support for the ’993 patent’s claim term “water flow regulator.” According to Petitioner, “water flow regulator” encompasses both adjustable devices for restricting the flow of water (i.e., valves) and fixed devices for restricting the flow of water (i.e., restrictors). Pet. 15. Petitioner contends that the ’904 Application does not provide support for water flow restrictors and, thus, does not provide support for the broader claim term water flow regulators. Id. at 14–15, 91–92. Petitioner argues that only adjustable water flow devices (i.e., valves) are supported by the ’904 Application. Id. Petitioner, thus, asserts that earliest effective filing date of the ’993 patent’s claims is the filing date of its application, January 27, 2014. Id. at 92. To be entitled to claim the benefit of an earlier filing date under 35 U.S.C. § 120 each application in the priority chain must comply with the written description requirement of 35 U.S.C. § 112(a). See Hollmer v. 14 The parties do not dispute that the ’993 patent and the earlier parent applications, including the ’904 Application and the ’606 Application, have the same pertinent portions of their specifications. See PO Resp. 71, n.16; Ex. 1004 ¶ 324. 15 Schuster issued on January 31, 2012, from Application No. 12/786,904, filed on May 25, 2010. Ex. 1029, code (21), (22), (45). Schuster, thus, issued more than one year prior to January 27, 2014.” slip op. at 46
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentable
“2. Analysis of Claims 19 and 20 Claim 19 depends from claim 14 and additionally recites, “wherein the waterflow regulator comprises an adjustable water flow regulator that is configured to adjust the flow rate of the second portion of the water based at least in part on a setting of the adjustable water flow regulator.” Ex. 1001, 12:16–20. Claim 20 depends from claim 14 and recites the same additional limitation. Id. at 12:21–24. Claims 19 and 20, thus, require the water flow regulator to be an adjustable water flow regulator. Petitioner indicates that the earlier parent applications provide written description support for an adjustable water flow regulator. Pet. 91 (“[T]he ’904 application specification makes it clear that the adjustability of the bowl fill valve is a desirable and essential feature of the invention”); PO Surreply 28. Accordingly, Petitioner fails to meet its burden to show, by a preponderance of the evidence, that claims 19 and 20 are unpatentable over Schuster.” slip op. at 50
Patent outcomesUS 9,139,993 mixed§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 9,139,993 - Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentablePTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision
Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed
“on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17
- Strike new argumentNew argument disregardedDecided for patent owner
“In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22
Patent outcomesUS 11,333,007 mixedClaim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites GrahamPatents in suitUS 11,333,007 - Tesla, Inc. v. Iqar Inc.All claims unpatentablePTAB · Sep 18, 2025 · IPR2024-00630 · APJ Sean P O’Hanlon · IPR · Final written decision
Claims 1–16 are unpatentable as anticipated by Koebler and obvious over Koebler alone and in combination with other references.
RulingsFinal written decision- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“benefit of the filing date of an earlier filed application only if the disclosure of the earlier application provides support for the claims of the later application, as required by 35 U.S.C. § 112.” In re Chu, 66 F.3d 292, 297 (Fed. Cir. 1995) (citing 35 U.S.C. § 120). Section 112 requires, inter alia, that the specification contain a written description of the claimed invention. 35 U.S.C. § 112(a). In determining whether the written description requirement is met, we consider “whether the disclosure of the application relied upon reasonably conveys to those skilled in the art that the inventor had possession of the claimed subject matter as of the filing date.” Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). This analysis requires “an objective inquiry into the four corners of the specification from the perspective of a person of ordinary skill in the art.” Id. Thus, “the level of detail required to satisfy the written description requirement varies depending on the nature and scope of the claims and on the complexity and predictability of the relevant technology.” Id. For example, the analysis must consider “the existing knowledge in the particular field, the extent and content of the prior art, the maturity of the science or technology, [and] the predictability of the aspect at issue.” Id. (alteration in original) (quoting Capon v. Eshhar, 418 F.3d 1349, 1359 (Fed. Cir. 2005)). “While a prior application need not contain precisely the same words as are found in the asserted claims, the prior application must indicate to a person skilled in the art that the inventor was ‘in possession’ of the invention as later claimed.” PowerOasis, Inc. v. T-Mobile USA, Inc., 522 F.3d 1299, 1306 (Fed. Cir. 2008) (citations omitted); see also Purdue Pharma LP v. Faulding Inc., 230 F.3d 1320, 1323 (Fed. Cir. 2000) (“In order to satisfy the written description requirement, the disclosure as originally filed does not have to provide in haec verba support for the claimed subject matter at issue.”). However, “it is the specification itself that must demonstrate possession. And while the description requirement does not demand any particular form of disclosure . . . , a description that merely renders the invention obvious does not satisfy the requirement.” Ariad, 598 F.3d at 1352 (citations omitted); see also Lockwood v. Am. Airlines, 107 F.3d 1565, 1572 (Fed. Cir. 1997) (“While the meaning of terms, phrases, or diagrams in a disclosure is to be explained or interpreted from the vantage point of one skilled in the art, all the limitations must appear in the specification. The question is not whether a claimed invention is an obvious variant of that which is disclosed in the specification. Rather, a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.”).” slip op. at 7
- Skill levelSkill level board ownDecided for petitioner
“The level of ordinary skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The person of ordinary skill in the art is a hypothetical person presumed to have known the relevant art at the time of the invention. In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). In determining the level of ordinary skill in the art, we may consider certain factors, including: “(1) the educational level of the inventor; (2) type of problems encountered in the art; (3) prior art solutions to those problems; (4) rapidity with which innovations are made; (5) sophistication of the technology; and (6) educational level of active workers in the field.” Best Med. Int’l, Inc. v. Elekta Inc., 46 F.4th 1346, 1353 (Fed. Cir. 2022) (quoting Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007)). “The patent’s purpose can also be informative.” Id.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“Initially, we note that, although Petitioner presents a definition for “traction” in its Reply (see Pet. Reply 10), Dr. Morellas agreed with Patent Owner’s proposed interpretation during his deposition: Q. What would a person having ordinary skill in the art understand the word “traction” to mean? A. It would mean the grip that the -- that the tire has with the road. Q. So when the tire is gripping the road, the vehicle will have traction; correct? A. Correct. Q. But if the wheels are spinning freely and not gripping the road, the vehicle has no traction; correct? A.· Correct. Ex. 2031, 36:8–17. Accordingly, we adopt Patent Owner’s interpretation of “traction” to be a measure “of the friction between the vehicle’s drive wheels and the road surface” such that “a vehicle’s wheels have ‘traction’ when wheel rotation acts to propel the vehicle along the roadway” and “[t]he vehicle’s wheels lose ‘traction’ when they spin freely relative to the road and thus are no longer acting to propel the vehicle along the roadway.” See PO Resp. 27; see also Tr. 18:4–5 (Petitioner’s counsel stating that “the ultimate disposition doesn’t matter which definition [of ‘traction’ the Board] adopt[s]”).” slip op. at 24
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“2. Anticipation “Under 35 U.S.C. § 102 a claim is anticipated ‘if each and every limitation is found either expressly or inherently in a single prior art reference.’” King Pharm., Inc. v. Eon Labs, Inc., 616 F.3d 1267, 1274 (Fed. Cir. 2010) (quoting Celeritas Techs. Ltd. v. Rockwell Int’l Corp., 150 F.3d 1354, 1360 (Fed. Cir. 1998)). “Anticipation requires the presence in a single prior art disclosure of all elements of a claimed invention arranged as in the claim.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010) (quoting Connell v. Sears, Roebuck & Co., 722 F.2d 1542, 1548 (Fed. Cir. 1983)). A reference inherently discloses an element of a claim “if that missing characteristic is necessarily present, or inherent, in the single anticipating reference.” Schering Corp. v. Geneva Pharm., 339 F.3d 1373, 1377 (Fed. Cir. 2003) (citing Cont’l Can Co. USA, Inc. v. Monsanto Co., 948 F.2d 1264, 1268 (Fed. Cir. 1991)). “Inherency, however, may not be established by probabilities or possibilities. The mere fact that a certain thing may result from a given set of circumstances is not sufficient.” Therasense, 593 F.3d at 1332 (quoting Cont’l Can, 948 F.2d at 1269).” slip op. at 28
Patent outcomesUS 10,850,616 unpatentableClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 10,850,616 - Provisur Technologies, Inc. v. Weber Food Technology GmbHAll claims unpatentablePTAB · May 28, 2025 · IPR2024-00235 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–6, 8, 10, and 14–16 are unpatentable as anticipated by Young and obvious over Young and Norrie; the Johnson and Belk ground was not reached.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Provisur proposes that one of ordinary skill in the art would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. See generally PO Resp. There being no dispute, we adopt Provisur’s definition of the level of skill in the art.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Provisur construes the claim terms “according to their plain and ordinary meanings as understood by a [person of ordinary skill in the art] in view of the specification and prosecution history” and posits that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 13. Weber appears to agree, stating in the related district court action that “most of [its] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 3 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 4 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 5 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 6 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). 1028, 5. This being the case, we do not find the need to expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (confirming that the Board need not construe claim terms where their construction is not material to the dispute).” slip op. at 5
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“without first determining how much fat existed to begin with, i.e., prior to the side of meat being trimmed. But, as Provisur correctly notes, Weber ignores what one skilled in the art reasonably would have understood from reading Young’s disclosure as a whole. See Pet. 30–36 (citing Ex. 1003 ¶¶ 104–106, 109–112); Pet. Reply 2–12. When that is done, one skilled in the art would have understood that a necessary premise of Young’s determination of the thickness of fat to remain on the loin is knowing the thickness of the fat to begin with, which Young’s imaging system 190 and imaging processing routine 240 determine by first analyzing a series of “fat/lean separation lines” and “edge lines” in the side of meat being trimmed. Pet. 30–32 (citing Ex. 1004, 17:34–62, 18:33–56, 22:53–24:38, Figs. 2, 13); Pet. Reply 3–7 (citing portions of same evidence). More specifically, as described in Young (and articulated by Provisur), the side of meat is placed fat side down on a product support, i.e., platen 20. See Ex. 1004, 7:16–21, Figs. 1, 2. Using several cameras—top plan camera 196, end view camera 197, and fat line camera 198—Young’s imaging system 190 acquires multiple images of the side of meat from various angles and under various lighting conditions to “provide image data regarding each side of [meat].” See id. at 17:34–18:56. That image data is then used by Young’s image processing routine 240 to generate a series of demarcation lines on the side of meat, including: (1) fat/lean separation lines (representing the interface between the loin meat and the fat layer along top, side, and end views of the meat product; and (2) edge lines (representing lines along the outer surface of the meat product). See id. at 22:53–23:67, Figs. 10, 13 (Blocks 242, 246, 250, 254). In addition, “a plurality of points (preferably 20) are generated for each of the fat/lean separation and edge lines using known pattern matching routines.” Id. at 23:28–30, Fig. 13 (Blocks 244, 248, 252, 256); see also id. at 23:61–63 (essentially same). The fat/lean separation and edge lines (and points therein) generated by Young’s image processing routine 240 are then used to calculate certain dimensions and characteristics of the side of meat, such as height, length, and width. Id. at 24:10–22, Fig. 13 (Block 258). As Provisur’s expert credibly testifies, one skilled in the art would have understood that the dimension from the fat/lean separation line to the edge line along the outer surface represents the thickness of fat cover on the side of meat, i.e., before the fat is trimmed. See Ex. 1003 ¶ 106. Insofar as how that dimension is used, Young states that controller 172 uses “dynamic (real time) image data” of the fat/lean separation and edge lines “to dynamically modify the cutting profile of the loin knife assembly 100 so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Ex. 1004, 18:32–45; see also id. at 17:48–52 (describing “real time processor” for “image processing routines”). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the loin, after trimming, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat,” although “[o]ther fat thicknesses may be desired in the alternative.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphases added)). Because the desired thickness of fat cover is what remains on the loin” slip op. at 9
- Strike new argumentNew argument consideredDecided for patent owner
“argument that Weber considers vital to its dispute of Provisur’s showing for the claimed fat thickness determination. During oral hearing, Weber repeatedly argued that Provisur changed theories midstream, i.e., between the time of the petition and the hearing. See Hrg. Tr. 22:18–24:47; see also id. at 31:14–22, 33:8–18, 34:16–20, 49:17–50:15, 54:16–56:25 (repeating same argument). More specifically, according to Weber, Provisur originally relied only on image data from Young’s “top view” camera as processed in “block 246” of Young’s image processing routine 240 when showing how Young meets the claimed fat thickness determination, whereas now Provisur relies on image data from Young’s “end view” cameras as processed in “Block 254.” Compare PO Sur-Reply 3–6 (focusing on Young’s “top view camera” in “block 246”), with Hrg. Tr. 27:4–16 (“[Block] 246, which is what they relied on, is processing images from the top-view camera in Young’s system. It is generating lines from the top-view camera in Young’s system. What they are newly trying to rely on today, for the first time, is Block 254 that is discussed toward the bottom of column 23 in Young, and that analyzes different images from a different camera. It is the end camera. It generates different lines. It demonstrates an end fat/lean line and an end edge line. Prior to today’s hearing, neither Petitioner, nor its expert, had ever discussed Block 254. You will not find a single reference to 254 in their papers, nor have they discussed the end edge line. It is completely new today. It finds absolutely no support in the record.” (emphases added)). We disagree with Weber’s contention. As shown and described in the petition, Provisur relies on more than simply Young’s “top view” camera and “block 246.” See Pet. 29–31. Rather, in its petition, Provisur annotates Young’s Figure 2 to show that image data from all three cameras of “imaging system 190”—“top plan camera 196, end view camera 197, [and] fat line camera 198”—play a role in the determination of fat thickness.8 Id. at 30. Moreover, Provisur cites the entire process depicted in “Figure 13” and described in columns “22:53–24:38” of Young as critical to the determination. Id. at 31. Those cited portions of Young involve not only the analysis of fat/lean and edge lines from “top view” images (block 246), but also the analysis of fat/lean and edge lines from “end view” images (blocks 250 and 254). See Ex. 1004, 23:12–24:13. In other words, Provisur’s showing for the claimed fat thickness determination is based on Young’s collective analysis of all those images. Indeed, Provisur’s expert confirms as much when confronted by Weber on cross-examination— Q. How does [Young] use the other cameras to identify that fat/lean separation line? A. Again, this is a -- this is a three-dimensional product that’s not regular, and all the views basically are needed to be able to describe that complex three-dimensional shape, so that the knife will be able to cut at that -- at that line, offset by whatever desired thickness there is, on that three-dimensional shape. Ex. 2006, 25:15–27:19 (emphasis added). 8 Indeed, contrary to Weber’s assertion, Provisur highlights “fat lean separation camera 198,” not top view camera 196, as most critical to the determination of fat thickness. Pet. 31. In the end, we reject the notion that Provisur changed theories” slip op. at 12
Patent outcomesUS 8,529,321 unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,529,321 - LG Electronics, Inc. / LG Electronics U.S.A., Inc. et al. v. Multimedia Technologies Pte. Ltd.Some claims unpatentablePTAB · May 19, 2025 · IPR2024-00699 · APJ St John Courtenay III · IPR · Final written decision
Claims 1, 2, 6–11, and 14–18 are unpatentable under § 103; claims 3–5, 12, and 13 were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“contends that an ordinarily skilled artisan for the ’805 patent “would have been someone knowledgeable about and familiar with the television display technology that is pertinent to the ’805 patent. A POSITA would have had a bachelor’s degree in Electrical Engineering, Software Engineering, or Computer Engineering, or equivalent training, and approximately two years of experience working in the field of television systems and networking, human-computer interaction, or related technologies. Lack of work experience can be remedied by additional education, and vice versa.” Pet. 9 (citing Ex. 1003 ¶¶ 18–20). In its Preliminary Response Patent Owner indicated it “adopts Petitioner’s definition of a person of ordinary skill in the art (‘POSITA’) for the purposes of [its] Preliminary Response.” Prelim. Resp. 28. We note Patent Owner does not dispute or otherwise disavow Petitioner’s definition of a POSITA in its Response or Sur-reply. See generally PO Resp.; PO Surreply. level of ordinary skill in the art. On the present record, we are satisfied that this definition comports with the level of skill necessary to understand and implement the teachings of the ’805 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that the prior art itself can reflect appropriate level of ordinary skill in art).” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“We disagree with Patent Owner. Id. We see nothing in the preamble 1.0, or “receiving” step 1.1.1, or “wherein” clause 1.1.2 that defines a data format prior to organizing step 1.2.1, and we decline to read limitations from the specification into the claim, i.e., a “pre-defined format” being defined prior to organizing step 1.2.1, as argued by Patent Owner. 5 PO Resp. 20. Preamble 1.0 is silent regarding any mention of a data format: “A method of providing content for a television (TV), the method comprising: . . . .” Although step 1.1.1 requires “receiving, by a processor, data relevant to one or more scheduled events from one of a corresponding subservice of a plurality of subservices,” at best this merely requires a type of data that is “relevant to one or more scheduled events” and does not require a particular data format to be used for “data relevant to one or more scheduled events,” nor the “pre-defined” format argued by Patent Owner. PO Resp. 20–21. (emphases added). Nor do we read step 1.1.2 as defining a particular data format used by the three recited types of subservices: “[1.1.2] wherein the plurality of subservices comprises a video-on-demand (VOD) subservice, electronic programming guide (EPG) subservice, and a media subservice.” 5 We emphasize that patentability is based upon the claims. “It is the claims that measure the invention.” SRI Int’l v. Matsushita Elec. Corp. of America, 775 F.2d 1107, 1121 (Fed. Cir. 1985) (en banc). A basic canon of claim construction is that one may not read a limitation into a claim from the written description. Renishaw PLC v. Marposs Societa' per Azioni, 158 F.3d 1243, 1248 (Fed. Cir. 1998). according to a pre-defined format corresponding to each of the plurality of subservices.” (emphases added). However, we find Patent Owner’s contention unavailing that the term “pre-defined format” recited in step 1.2.1 requires three different data model pre-defined formats because claim 1 is silent regarding the argued term “different.” See PO Sur-reply 9 (regarding Patent Owner’s response to the question of “whether element [1.2.1] and the term ‘pre-defined format’ requires three different data models.” Patent Owner responds: “For the above reasons, they do.”). Moreover, we note the term “data model” is not introduced until subsequent “wherein” clause 1.2.2, which merely requires that “the predefined format comprises one of a VOD data model, an EPG data model and a media data model.” (emphasis added).” slip op. at 20
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Regarding the claim 1 term “uniform format” Petitioner replies that Patent Owner “does not dispute that the prior art teaches a ‘uniform format’” in step 1.2.4. Pet. Reply 8 (citing generally PO Resp.). Therefore, Petitioner argues “for the purposes of this proceeding, the term “uniform format” does not require express construction.” Pet. Reply 8 (citing Nidec (Fed. Cir. 2017)). Nevertheless, at the Board’s request (Dec. 29), Petitioner proceeds to address the scope of the claim 1 term “uniform format.” Pet. Reply 8. Petitioner notes that the ’805 patent uses the term “uniform format” in column 33: “The data models provide uniform formats for the respective subservices (i.e., VOD subservice 1420, EPG subservice 1424, and media subservice 1428) and/or the internal content provider modules 1416 which interface with applications 416.” Pet. Reply 8 (quoting Ex.1001, 33:25–30). Petitioner further notes that Dr. Lippmann explains, “the ’805 patent does not appear to ascribe any specific meaning to the term ‘uniform format’ and the passage does not limit the scope of this term to require a plurality of uniform formats.” Pet. Reply (quoting Ex. 1020 ¶ 13).” slip op. at 22
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityReference is prior artDecided for petitioner
“Patent Owner’s arguments are not persuasive because on January 14, 2025, the Federal Circuit in Lynk Labs Inc. v. Samsung Electronics Co. Ltd., (125 F.4th 1120, 1132 (Fed. Cir. 2025)) held that Title 35 U.S.C. sections “311(b) and 102(e)(1) permit IPR challenges based upon published patent applications, and such published patent applications can be deemed prior art in IPRs as of their filing date.” (emphasis added). Accordingly, we conclude both Melnychenko and Choi are prior art for the purpose of this IPR pursuant to 35 U.S.C. § 311(b) under the holding of Lynk Labs.” slip op. at 6
Patent outcomesUS 10,419,805 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,419,805
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.