• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Charles River Laboratories, Inc. v. Seikagaku CorporationAll claims unpatentable
  PTAB · Sep 8, 2026 · PGR2025-00023 · APJ Per Curiam · PGR · Final written decision

  Claims 1–9 are unpatentable as anticipated by the ’629 publication; the claims are not entitled to the 2013 priority date.

  RulingsFinal written decision

  • Skill levelSkill level board ownOther

    “We find that a rigid requirement as to the subject of a POSITA’s doctoral degree (e.g., biochemical engineering, enzymology), or experience working specifically with horseshoe crab proteins, is not consistent with the evidence of record. See, e.g., Ex. 1067, 20:23–21:2 (Dr. Schaefer testifying that the fact the “name of [his] Ph.D. is immunology . . . does not change the fact that the core of [his] thesis training was really in molecular biology”), 22:3–15 (explaining that “the fact that the production of proteins recombinantly is mostly species agnostic”); Ex. 1069, 45:20–47:17 (Dr. Morris testifying that whether a person is a POSITA depends on the person’s “experience, [ ] publications,” and work done for the Ph.D. rather than the name of the Ph.D. program). We also find that evidence of record supports Petitioner’s assertion that, for purposes of defining a POSITA, “[m]ore education could substitute for experience, and vice versa.” See, e.g., Pet. 22; Ex. 1065, 99:14–100:3. Accordingly, based on the entirety of the trial record, we find a POSITA with respect to the claims of the ’109 patent would have had a two years of experience with cloning genes, expressing cloned genes as proteins, and/or characterizing such cloned genes and proteins, with more education being able to substitute for experience, and vice versa. A POSITA may also have collaborated with others, including those with specific experience in utilizing or assessing horseshoe crab Factor C for endotoxin detection and quantitation.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither party proposes an express construction of any claim term. See Pet. 22–23 (not proposing any constructions); PO Resp. 23 (“Patent Owner agrees that the terms can be afforded their plain and ordinary meaning.”). However, Patent Owner states that some of Petitioner’s arguments implicitly construe claim 1 in an erroneous manner. PO Resp. 23–28. “For example, Petitioner argues that ‘an adequate written description would have to either disclose representative examples of the possible working cascades of various proteins or some accurate structural feature of the claimed proteins that allow them to function in the claimed assay as a whole.’” Id. at 23 (quoting Pet. 35). Patent Owner argues that, contrary to what Petitioner’s argument allegedly implies, “Claim 1 is directed to a method for producing an endotoxin assay agent” and does not require the use – Owner that claim 1 does not require the use of endotoxin assay agent. However, the claimed endotoxin assay agent must be capable of performing the assay, as counsel for Patent Owner acknowledged. Tr. 83:5–9.” slip op. at 10

  • BurdenNot shown unpatentable

    “In this case, to show that the claims of the ’109 patent are unpatentable for lack of written description, Petitioner would have needed to show that the specification as filed (i.e., the ’420 application) fails to reasonably convey to those skilled in the art that Patent Owner had possession of the claimed subject matter as of the July 3, 2023, filing date. Petitioner did not. Pet. 23–24. Nor does Petitioner’s declarant offer testimony that could support such a showing. See Ex. 1003 ¶50 (“I have been asked to provide my opinions as to the state of the art in this field for purposes of determining what the inventors disclosed as their invention as of December 10, 2013.”), ¶51 (“Whenever I offer an opinion in this declaration about the knowledge of a POSA, the manner in which a POSA would have understood the claims of the ’109 patent or its description, the manner in have been led to do based on the prior art, I am referencing the December 10, 2013 timeframe.”). In our Institution Decision, we stated: Although the ’420 application is essentially identical to the ’767 application, the person of ordinary skill in 2013 is not the same as in 2023. See Ariad, 598 F.3d at 1351 (“[T]he [written description] test requires an objective inquiry into the four corners of the specification from the perspective of a person of ordinary skill in the art.” (emphasis added)). Thus, the information presented in the Petition, which is limited to the perspective of a 2013 POSITA, does not demonstrate that it is more likely than not that at least 1 of the claims challenged in the Petition is unpatentable for lack of written description. Inst. Dec. 12 (alterations in original). During trial, Petitioner did not present any further arguments in support of Ground 1. See generally Pet. Reply. Petitioner has failed to prove that claims 1–9 are unpatentable for failing to meet the written description requirement set forth in 35 U.S.C. § 112(a).” slip op. at 12

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateNot shown unpatentable

    “Although the evidence before us shows that, in 2013, a POSITA knew how to recombinantly express genes in expression systems such as CHO or HEK-293 cell lines, the evidence shows that this was true only for genes whose genetic sequences were known or readily available. See, e.g., Ex. 1069, 34:11–22 (“Q. Okay. So you would agree that the creation of the recombinant protein requires the underlying sequence of, as you said, the original animal? A. Of course.”) Because it is undisputed that, in 2013, the genetic sequence for Limulus polyphemus Factor C was unknown, or least not publicly available, Falko-Gunter does not support a finding of adequate written description here. See, e.g., Tr. 48:18–19 (“Patent Owner agrees that there had not been, as of 2013, the full length cDNA sequence for Limulus polyphemus Factor C published.”).” slip op. at 23

  Patent outcomesUS 11,959,109 unpatentable
  Claim construction§ 102 anticipation§ 112 disclosure
  Patents in suitUS 11,959,109
• Embody, Inc. / Zimmer Biomet Holdings, Inc. v. Lifenet HealthSome claims unpatentable
  PTAB · Aug 4, 2026 · IPR2025-00249 · APJ Michael J Fitzpatrick · IPR · Final written decision

  Claims 1 and 4–8 are unpatentable: claims 1 and 4–6 as obvious over Huang2 and Kuo, and claims 7–8 as anticipated by Huang2; claims 2–3 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for patent owner

    “(“POSITA”) “would be a Ph.D. student with a minimum of two years of experience in their faculty advisor’s laboratory” and would have an understanding of “electrospinning fibers, including for tissue engineering, tissue engineering techniques, and using/performing FFT analysis.” Pet. 20– 21 (citing Ex. 1003 § II.C7). Patent Owner does not dispute Petitioner’s proposal but specifies the set of disciplines within which the Ph.D. would have been earned, namely “bioengineering, chemical engineering, mechanical engineering, or a related engineering discipline.” PO Resp. 6. We adopt and apply Petitioner’s proposal as clarified by Patent Owner regarding the Ph.D. discipline.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

    “At the outset, we agree with Patent Owner that the Specification purports to define “major peaks” in the following sentence: “The ‘major peaks’ herein refer to peaks higher than the average of the peaks in the result.” Ex. 1001, 13:28–29. We determine that this language satisfies at least two of the criteria set forth in Alnylam. Specifically, the sentence at “refers to” to explain what qualifies as major peaks. That is not the end of the inquiry, however, as we find there is still some ambiguity as to whether the patentee intended to define “major peaks” so as to require so-called “minor peaks” in the claimed invention. See Bell Atlantic, 262 F.3d at 1268 (“[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.”). Importantly, the Specification does not treat the existence of minor peaks as prerequisites for the existence of major peaks. Indeed, the Specification does not discuss “minor peaks” at all. See generally Ex. 1001. Likewise, none of the claims of the ’227 patent, whether challenged or unchallenged, recites “minor peaks” or any additional peaks beyond the disputed “major peaks.” Id. at 23:30–24:42. Nor does the Specification include an example of FFT analysis results in which the average of the peaks therein is calculated and those higher than the average are identified as major peaks.8” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundMixed

    “Petitioner has the better position. Huang2 teaches crosslinking and provides a reason for doing so (stability). In particular, Huang2 states: “To better mimic skin ECM, electrospun collagen fibers have been fabricated, however, the rapid degradation and poor mechanical properties determine that either crosslinking or combination with other materials is necessary to obtain a stable scaffold.” Ex. 1005, 1791 (emphasis added). It is true that, in describing work actually carried out, Huang2 states that blending with PCL was performed and does not mention crosslinking. See id. at 1792 (“Nanofibrous matrices of PCL and Collagen at a weight ratio of 3:1 were fabricated using electrospinning as previously described.”). However, the prior art – here, Huang2 – is not limited to that which it describes having created. See In re Mills, 470 F.2d 649, 651 (C.C.P.A. 1972) (“a reference is not limited to the disclosure of specific working examples”); see also In re Lemelson, 397 F.2d 1006, 1009 (CCPA 1968) (“The use of patents as references is not limited to what the patentees describe as their own inventions or to the problems with which they are concerned. They are part of the literature of the art, relevant for all they contain.”); In re Fritch, 972 F.2d 1260, 1264 (Fed. Cir. 1992) (“It is well settled that a prior art reference is relevant for all that it teaches to those of ordinary skill in the art.”). Huang2 teaches two stabilization methods when using collagen in scaffolds. Huang2 states that one or the other “is necessary to obtain a stable scaffold” (when using collagen), but it does not preclude or teach away from using Patent Owner-cited testimony of Dr. Mikos is not as definitive as Patent Owner suggests; Dr. Mikos’s testimony is that a person of ordinary skill in the art “typically would not have done both.” Ex. 2015 ¶64 (emphasis added). The bottom line is that Huang2 teaches the person of ordinary skill in the art two ways to stabilize scaffolds/matrices comprised of collagen, provides a reason for doing so (stability), and does not teach away from using both. We are persuaded that a “scaffold comprising crosslinked fibers comprising collagen” would have been obvious in view of the cited teachings of Huang2.” slip op. at 33

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We are not persuaded by Appellant’s citations to either reference. As discussed above, Petitioner’s Ground 1 is premised on a person of ordinary skill in the art altering the native flat sheet structure of Huang2 by rolling it into a jelly-roll structure as taught by Kuo. See Pet. 41 (Beginning its claim 2 arguments with the following: “Claim 1 is obvious for the reasons expressed above in § X.A., supra, which are incorporated herein.”); see also Pet. Reply 17 (“[B]ased on the explicit teaching of Kuo, a POSA would have been motivated to take the electrospun flat scaffold made by the techniques of Huang2, seed it with the desired cells, and roll it to treat a tendon and ligament.” (emphasis added)). Indeed, the paragraphs of Kuo that Petitioner cites for disclosing “scaffold sheets,” explicitly describe rolling them into jelly-roll like structures. See Ex. 1018 ¶7 (stating that “the sheet is spirally contacting a scaffold sheet of fibrous material with a cell; and rolling the scaffold sheet in a jelly-roll like manner to form a spirally wound tissue construct”), ¶22 (describing a method comprising “forming a tissue construct by contacting a scaffold sheet of fibrous material with a cell; and rolling the scaffold sheet in a jelly-roll like manner to form a spirally wound tissue construct” and implanting it in a patient). Petitioner fails to argue that that “one or more elongated sheets” recited in claim 2 would encompass the rolled structure of its proposed modification. Nor does Petitioner articulate a claim construction argument that could support such an argument. Petitioner has failed to prove, by a preponderance of the evidence, that claim 2 would have been obvious over Huang2 and Kuo.” slip op. at 42

  Patent outcomesUS 11,318,227 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Markman · KSR
  Patents in suitUS 11,318,227
• Embody, Inc. / Zimmer Biomet Holdings, Inc. v. Lifenet HealthAll claims unpatentable
  PTAB · Aug 4, 2026 · IPR2025-00248 · APJ Michael J Fitzpatrick · IPR · Final written decision

  Claims 1–3 and 5–12 are unpatentable as anticipated by Huang2; claim 4 is unpatentable as obvious over Huang2 and Kumbar. Lee grounds failed.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of “electrospinning fibers, including for tissue engineering, tissue engineering techniques, and using/performing FFT analysis.” Pet. 18– 19 (citing Ex. 1003 § II.C5). Patent Owner does not dispute Petitioner’s proposal but specifies the set of disciplines within which the Ph.D. would have been earned, namely “bioengineering, chemical engineering, mechanical engineering, or a related engineering discipline.” PO Resp. 5–6. We adopt and apply Petitioner’s proposal as clarified by Patent Owner regarding the Ph.D. discipline.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

    “A patentee “may choose to be his own lexicographer and use terms in a manner other than their ordinary meaning, as long as the special definition of the term is clearly stated in the patent specification or file history.” Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (citing Hoechst Celanese Corp. v. BP Chemicals Ltd., 78 F.3d 1575, 1578 (Fed. Cir. 1996)); see Markman v. Westview Instruments, Inc., 52 F.3d 967, 980 (Fed. Cir. 1995) (en banc) (“[A]ny special definition given to a word must be clearly defined in the specification.”), aff'd, 517 U.S. 370 (1996); CCS Fitness, Inc. v. Brunswick Corp., 288 F.3d 1359, 1366 (Fed. Cir. 2002). “[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.” Bell Atlantic Network Services, Inc. v. Covad Communications Group, Inc., 262 F.3d 1258, 1268 (Fed. Cir. 2001). Among the criteria to consider in whether the patentee acted as a lexicographer to define a claim term include (a) whether the patent specification included the statement in question under a section for marks, (c) whether the sentence uses the term “refer to,” which generally “conveys an intent for [that sentence] to be definitional,” and (d) whether there are other non-limiting terms (e.g., “for example,” or “include”) that contradict a definitional intent. Alnylam Pharms., Inc. v. Moderna, Inc., 138 F.4th 1326, 1333 (Fed. Cir. 2025) (alteration in original). At the outset, we agree with Patent Owner that the Specification purports to define “major peaks” in the following sentence: “The ‘major peaks’ herein refer to peaks higher than the average of the peaks in the result.” Ex. 1001, 13:6–7. We determine that this language satisfies at least two of the criteria set forth in Alnylam. Specifically, the sentence at issue sets out “major peaks” in quotation marks, and then uses the term “refers to” to explain what qualifies as major peaks. That is not the end of the inquiry, however, as we find there is still some ambiguity as to whether the patentee intended to define “major peaks” so as to require so-called “minor peaks” in the claimed invention. See Bell Atlantic, 262 F.3d at 1268 (“[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.”).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “As discussed above, we agree with Patent Owner that the sentence it cites from the Specification of the ’223 patent bears sufficient hallmarks of lexicography. However, the Specification nonetheless lacks any indication that so-called “minor peaks” are a necessary component of the claimed invention. “Although it is firmly settled that an applicant may act as a 9 Figure 8B does not contain “major peaks” despite clearly depicting two “peaks higher than the average of the [three or possibly four] peaks in the result” because none of the peaks is a reflection of fiber alignment. 10 After presenting claim construction arguments based on Ayres 2008, Patent Owner confusingly states: “Finally, whether Ayres-2008 supports [Patent Owner’s] construction is irrelevant.” PO Sur-Reply 5 (emphasis added). definition that is contrary to the ordinary meaning of a claim term unless it communicates a deliberate and clear preference for this alternative definition.” Kumar v. Ovonic Battery Co., 351 F.3d 1364, 1368 (Fed. Cir. 2003). There is no indication that the patentee sought to require “minor peaks” within the scope of the claimed invention. Nor are we persuaded that a person of ordinary skill in the art would readily understand the scope of the term “major peaks” to require non-major peaks. We interpret the Specification’s statement that “‘major peaks’ herein refer to peaks higher than the average of the peaks in the result” (Ex. 1001, 13:6–7) to be teaching a person of ordinary skill in the art how to identify or discern “major peaks,” which indicate a principal axis of alignment, from any non-major peaks, which would be caused by something else. We conclude that a person of ordinary skill in the art would consider “major peaks” as used in the ’223 patent as referring to peaks that reflect the sole axis or primary axis of fiber alignment. See, e.g., id. at code (54) (“ALIGNED FIBER AND METHOD OF USE THEREOF”), code (57) (“A scaffold comprising an aligned fiber.”), 1:6–7 (“The invention relates to an aligned fiber and method of use thereof.”), 1:11–12 (“The invention relates to a scaffold comprising an aligned fiber.”), 13:16–17 (“Alignment of the fibers in the scaffold may be measured by a fast Fourier transform (FFT) analysis.”). This would certainly include peaks materially higher than the average of the peaks in the result, but it would not be limited to situations involving peaks of different heights or require so-called minor peaks. Based on the totality of the evidence before us, we do not construe the claims to require non-major peaks.” slip op. at 16

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed

    “Petitioner argues that, for the aligned sample, a major peak occurs at about 90° as identified by Petitioner’s annotation (red arrow). Pet. 30–31. As support, Petitioner directs us to Huang2’s explicit description of what the peak indicates, namely that “[t]he narrow peak of the normalized intensity values in anisotropic [aligned] matrices (Figure 1C) indicated that PCL/Coll nanofibers aligned along a single axis (Fig. 1B).” Id. at 31 (alterations in original) (quoting Ex. 1005, 1794). Patent Owner disputes that the illustrated peak is a major peak solely based on the lack of any lesser peaks. See PO Resp. 13 (“[T]he height of the sole peak is identical to—not higher than—the average height of the peaks in the result.”). As discussed above, however, we do not construe “major peaks” as requiring the existence of non-major peaks. We find that the illustrated peak in the Aniso plot of the FFT analysis results (Figure 1C) is a major peak within the meaning of the claim. The evidence in support of this finding is overwhelming. First, the term “Aniso” as used in Huang2 refers to fibers “with alignment.” Ex. 1005, 1792. Huang2 describes fabricating such matrices of aligned fibers with electrospinning, the same method used to impart alignment in the ’223 patent. Id. at 1791–92. Huang2 visually confirms that the fibers in fact are aligned via scanning electron microscopy. Id. at Fig. 1B. Further, Huang2 explicitly states that the peak illustrated in the Aniso plot of the FFT analysis results (Figure 1C) is caused by the fact that the “PCL/Coll nanofibers aligned along a single axis (Fig. 1B).” Id. at 1794. This is precisely what electrospinning may yield aligned fibers and images of aligned fibers will yield FFT results with major peaks. Ex. 1001, 2:18–19, 4:46–60, 13:16–26. Additionally, Huang2 itself considers the peak illustrated in the Aniso plot of the FFT analysis to be significant, stating: “In contrast [to the Aniso plot], the lack of a significant peak for the fibers collected on a stationary surface [(i.e., without electrospinning)] demonstrated no preferred fiber orientation in the isotropic matrices” (i.e., the Iso plot). Ex. 1005, 1794. Indeed, the asserted major peak in the Aniso plot shown in Huang2’s Figure 1C is higher than any other data point on the plot. For these reasons, we find the peak to be a major peak.15 Petitioner acknowledges that Figure 1C only reports its results” slip op. at 32

  Patent outcomesUS 10,137,223 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Markman
  Patents in suitUS 10,137,223
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• Bio-Rad Laboratories, Inc. v. California Institute Of TechnologyNo claims unpatentable
  PTAB · Mar 23, 2026 · IPR2024-01451 · APJ Tawen Chang · IPR · Final written decision

  Claims 1–19 were not shown unpatentable: Larson did not establish the claimed detection in a single sample volume, and the asserted obviousness combinations did not cure the deficiencies.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner states that, “[f]or purposes of this IPR proceeding, PO does not contest Petitioner’s description of qualifications for a person of ordinary skill in the art (POSA) set forth [above].” PO Resp. 23. In view of the above, and because Petitioner’s uncontested description of one of ordinary skill in the art is reasonable and consistent with the ’921 patent and the cited art, we adopt Petitioner’s definition of a POSA for purposes of this Decision, except that we replace the phrase “at least a year of experience in quantitative and/or dPCR and fluorescence-based analyte detection” with “around a year of experience in quantitative and/or dPCR and fluorescence-based analyte detection.” Pet. 9 (emphasis added).13” slip op. at 14

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We begin with “the context in which a term is used in the asserted claim,” which can be “highly instructive.” Phillips, 415 F.3d at 1314. In this case, claim 1 recites that the claimed assay is “capable of unambiguously detecting the presence or absence of each of said at least M analytes, in any combination of presence or absence, in a single sample volume, . . . wherein the analytes are amplified in the single sample 15 In this regard, we note that Petitioner’s claim construction position is not predicated on the collection of droplets being reconstituted into its original, pre-partition form prior to amplification; rather, the droplets remain compartmentalized from each other in the PCR thermal cycling tube. Tr. 65:21–66:9 (Petitioner’s counsel explaining that the droplets do not combine in the PCR thermal cycling tube but, rather, are “suspended in an immiscible fluid and analyzed en masse”). indicates that the first instance of single sample volume, i.e., the single sample volume in which the presence or absence of each M analytes are to be detected, is the antecedent basis for the second instance of “single sample volume,” i.e., the single sample volume in which the analytes are amplified. Thus, as the parties appear to agree, the single sample volume in which amplification takes places must be the same single sample volume in which the presence or absence of analytes are to be detected. We are not persuaded that, when accorded its plain and ordinary meaning, a single sample volume divided into a collection of droplets would be considered the “same” single sample volume prior to its partition.” slip op. at 17

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “With respect to the limitation, “wherein the analytes are amplified in the single sample volume,” Petitioner asserts that “Larson discloses PCR assays that amplify target polynucleotide in a single sample volume, specifically a portion of the reaction mixture that is subsequently partitioned into droplets.” Pet. 31 (emphasis added). There is no dispute that the amplification of the analytes in Larson occurs in the droplets. Larson ¶¶ 6–7 (explaining that “[d]igital PCR (dPCR) is an alternative quantitation method in which dilute sample are divided into many separate reactions” and that “[t]he template is amplified in the droplet for detection”) (emphasis added). Because the claims require that amplification of the analytes be in the same sample volume in which the at least M analytes, in any combination of presence or absence, is unambiguously detected, and because the pre-partition single sample volume is not the same single sample volume as the collection of droplets after partition under our claim construction set forth above, we find Petitioner has not shown, by a preponderance of evidence, that claims 1–10 and 13–19 are anticipated by Larson.17 Tr. 68:12–69:14 (Petitioner’s counsel” slip op. at 27

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Although we agree with Petitioner that Larson contemplates scenarios in which droplets may contain more than one target molecule and does not require the exclusion of such multiple occupancy droplets in all embodiments, we are nevertheless not persuaded Petitioner has shown, based on a preponderance of evidence, that Larson renders obvious an assay capable of unambiguously detecting, in such multiple occupancy droplets, the presence or absence of each of at least M analytes, in any combination of presence or absence, when M is greater than F and F is at least 2.” slip op. at 32

  Patent outcomesUS 11,827,921 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,827,921
• Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentable
  PTAB · Feb 9, 2026 · IPR2024-01095 · APJ Garth D Baer · IPR · Final written decision

  Claims 2, 4, 9–12, and 17 are unpatentable under § 103 because the prior-art combinations teach the claimed features and have adequate motivation and reasonable expectation of success.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner contends a person of ordinary skill in the art “would have had a Bachelor’s degree in chemistry, physics, or a comparable field of study, and at least three years of research or industrial experience with organic optoelectronic light-emitting devices.” Pet. 10. Further, “[a]n individual with additional education could have less research or industrial experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s formulation. See generally PO Resp. We adopt Petitioner’s uncontested proposed definition because it is consistent with the disclosures of the asserted prior art. See, e.g., Ex. 1006, code (57); Ex. 1011, code (57).” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “electron-hopping dopant. See In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004) (“The prior art’s mere disclosure of more than one alternative does not constitute a teaching away from . . . alternatives because such disclosure does not criticize, discredit, or otherwise discourage the solution claimed.”). As Petitioner explains, “Liq acts as an n-dopant in Ma,” which “increases ETL conductivity.” Pet. Reply 10. Patent Owner does not contest that Liq acts as an n-dopant in Ma. See Pet. Reply 30. Thus, Petitioner’s proposed combinations “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Pet. Reply 10. Next, Patent Owner faults Petitioner for failing to show that using Ma’s Liq dopant in Diekmann’s/Suzuki’s ETL would result in lower diffusion or higher efficiencies as compared to Diekmann’s/Suzuki’s preferred n-dopants, which included cesium, barium, or lithium fluoride. PO Resp. 31–35; see PO Sur-reply 4–5. We disagree with Patent Owner’s argument because Petitioner does not need to show that Ma’s Liq n-dopant “was an improvement in a categorical sense” over Diekmann’s/Suzuki’s n-dopants, so long as Ma’s n-dopant was known and one skilled in the art would understand that implementing it had advantages. See Intel Corp. v. Pact XPP Schweiz AG, 61 F.4th 1373, 1381 (Fed. Cir. 2023) (quotation marks omitted); In re Fulton, 391 F.3d 1195, 1200 (Fed. Cir. 2004) (“[O]ur case law does not require that a particular combination must be the preferred, or the most desirable, combination described in the prior art.”). Petitioner does not assert skilled artisans would have used Liq because it was a superior to Diekmann’s/Suzuki’s preferred dopants, but because doping ETLs with Liq had known benefits including lower driving voltage and enhanced power efficiency from enhanced carrier injection increased transport conductivity, as compared to an undoped device. Pet. 37 (citing Ex. 1010, 813). That other potentially suitable or even superior n-dopants were also known does not make Liq nonobvious. Given Liq’s benefits outlined above, Petitioner has articulated sufficient reasoning with rational underpinning to support the legal conclusion that its proffered combination of Ma’s known dopant in Diekmann’s/Suzuki’s device would have been obvious to one skilled in the art. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007).” slip op. at 12

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “1. Whether Ma Qualifies as a Prior Art Printed Publication First, Patent Owner argues that Petitioner has not demonstrated that Ma was publicly accessible in August 2008 so as to qualify as prior art. PO 11 As Petitioner notes, the district court adopted a claim construction requiring only “one or more wavelengths” in the infrared-to-UV spectrum. PO Resp. 26 (citing Ex. 2031, 47–48). Resp. 16–24. We addressed this same issue in our Final Written Decision in IPR2024-01094. IPR2024-01094, Paper 42 at 9–13. As we explained there, Ma qualifies as prior art printed publication because the record evidence supports what Ma says on its face—that it was published online on August 29, 2008 by an Elsevier, an established publisher, in Synthetic Metals, which is a reputable journal. Id. For the same reason explained in IPR2024-01094, we agree with Petitioner that Ma qualifies as a prior art printed publication.” slip op. at 10

  Patent outcomesUS 11,828,425 unpatentable
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 11,828,425
• Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.Some claims unpatentable
  PTAB · Jan 22, 2026 · IPR2024-01094 · APJ Grace Karaffa Obermann · IPR · Final written decision

  Claims 1, 2, 6, and 8–14 are unpatentable as obvious over Ma; claims 3 and 4 were not shown unpatentable over Werner.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends: A person of ordinary skill in the art (“POSA”) at the time of the alleged invention of the ’223 patent would have had a university degree in chemistry and additional expertise or a second university degree in the field of electrical engineering, particularly optoelectronics, or alternatively a university degree in electrical engineering and additional expertise or a second university degree in the field of chemistry. The person of ordinary skill in the art has spent several years studying the structure and function of organic optoelectronic components, in particular OLEDs, and has detailed knowledge of the chemical structure of light-emitting organic layers and the transport of charge carriers to these layers. In this respect, the person of ordinary skill in the art works at the interface between electrical engineering/physics (charge carrier transport and light emission processes in optoelectronic components) and chemistry, in particular organic chemistry (materials and layer stack combinations suitable). Pet. 14 (citing Ex. 1003 ¶¶ 46–47). Patent Owner does not dispute Petitioner’s contention. See generally Resp. Neither party indicates that the result would change depending on the definition selected. We adopt Petitioner’s uncontested proposed definition, because it is consistent with the disclosures of the asserted prior art references. See Ex. 1005, (code 57); Ex. 1007, 8107 (abstracts of the references asserted in the patentability challenges).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under that standard, claim terms generally are given their plain and ordinary meaning as would have been understood by the ordinarily skilled artisan at the time of the invention and within the context of the entire patent disclosure. See Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). We construe claim terms only as relevant to the parties’ contentions and only to the extent necessary to resolve the issues in dispute. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999); Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017). Neither party indicates that an express construction for any claim term is necessary to resolve the disputes at hand. Pet. 15; see generally Resp. On this record, we determine that no claim term requires express construction for purposes of this Decision. In our analysis of the challenges, however, we discuss the meaning of the terms “metal complex” and “central metal atom,” which appear in claim 1 (Ex. 1001, 19:19–20) to the extent necessary to resolve Patent Owner’s contention that Petitioner fails to establish that Ma invalidates claim 1. See Resp. 53, 56–58.” slip op. at 9

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Whether Ma qualifies as a “printed publication” involves an inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public. In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004). A reference is considered “publicly accessible” upon a satisfactory showing that the document has been “disseminated or otherwise made available to the extent that persons interested and ordinarily skilled in the subject matter or art exercising reasonable diligence[] can locate it.” Kyocera Wireless Corp. v. ITC, 545 F.3d 1340, 1350 (Fed. Cir. 2008); see Hulu, LLC v. Sound View Innovations, LLC, IPR2018-01039, Paper 29, 10– 11 (PTAB Dec. 20, 2019) (precedential).” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “Based on the information presented, we find Petitioner has the better position. Patent Owner admits that joint vaporization means “two materials vaporize together.” Reply 21 (quoting Resp. 54). As Petitioner argues, “This is what Ma discloses.” Id. We agree with Petitioner that Ma describes a “two-component” electron transport layer having a “thickness with one value.” Id.; see Ex. 1007, 811 (reporting a “co-deposited” application of “BPhen:LiQ” that is “50 nm thick”). Ma’s disclosure, thereby, strongly “indicates that the two components were vaporized together––as opposed to creating a ‘macroscopically homogenous form’” prepared by sequentially vaporizing the individual components as Patent Owner “hypothesizes.” Reply 21 (citing Ex. 1020 ¶¶ 42–44; Ex. 2041 ¶¶ 155–157); see Resp. 54– 55; see also Ex. 1007, 811 (Ma’s description of its device fabrication, appearing in the third paragraph of the experiments section). Petitioner further advances evidence that “[p]reparing a layer that is ‘macroscopically homogeneous’ but potentially microscopically heterogeneous,” as Patent Owner postulates, “would introduce excessive variability and render the data noncomparable and unreliable, thus undermining the experiment’s purpose.” Reply 21 (citing Ex. 1020 ¶ 44); see Resp. 54–55. Patent Owner presents no counterargument or evidence that is persuasive to undercut Petitioner’s reasoning or evidence on that point. See Sur-reply 19–22. Petitioner also argues that an ordinarily skilled artisan would have recognized “that vaporizing materials together would best achieve Ma’s objective of assessing the current density using different Liq doping percentages.” Reply 22 (citing Ex. 1007, 811; Ex. 1020 ¶ 51). Here again, Petitioner’s evidence on point stands uncontested. See Sur-reply 19–22 (declining to contest that point). On this record, therefore, we agree with Petitioner that, as to the relevant disclosure in Ma, “the most natural interpretation of ‘co-deposition’ for forming a layer, particularly when there is nothing to indicate that the materials” are “vaporized sequentially,” is that the materials are co-deposited by joint vaporization. Reply 22 (citing Ex. 1020 ¶ 46–51). We further agree that, “[u]nder a preponderance standard, Ma’s disclosures are sufficient to render joint vaporization at least obvious.” Id. For the above reasons, we determine that Petitioner demonstrates by a preponderance of the evidence that Ma discloses joint vaporization as required by the challenged claims.” slip op. at 15

  Patent outcomesUS 8,558,223 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 8,558,223

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.