- Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision
Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21
Patent outcomesUS 11,326,227 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,326,227 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision
Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25
Patent outcomesUS 10,961,602 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,961,602 - Syngenta Crop Protection AG v. Inflexion Point Technologies, LLCInstitution deniedPTAB · Dec 1, 2025 · PGR2025-00045 · APJ Debra L Dennett · PGR · Institution
The Board denied institution because Petitioner did not show it was more likely than not that any challenged claim was unpatentable under the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“We have authority to determine whether to institute a post-grant review under 35 U.S.C. § 324. Institution of a post-grant review is authorized by statute only when “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). The burden is on Petitioner to show that the challenged patent is eligible for postgrant review. Mylan Pharms. Inc. v. Yeda Research & Dev. Co., PGR2016- 00010, Paper 9 at 10 (PTAB Aug. 15, 2016) (holding that the ultimate burden of persuasion remains with a petitioner to demonstrate that the challenged patent is eligible for post-grant review). Upon consideration of the Petition, Preliminary Response, and the cited evidence, we determine that Petitioner has not shown that it is more likely than not that any of the challenged claims are unpatentable. We thus determine to not institute a post-grant review of the ’027 patent based on the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“a Bachelor of Science degree in Agricultural or Mechanical Engineering with 2–4 years of practical, applied experience in the field of agricultural machinery, including systems integration and fluid handling and sprayer control systems, or equivalent experience. Prelim. Resp. 12 (citing Ex. 2001, ¶ 59). Patent Owner states that the differences in the asserted levels of ordinary skill should not change the outcome of the Petition. Id. For the purposes of this decision, we adopt Petitioner’s definition, which appears consistent with the level of skill shown in the prior art references of record and the ’027 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). Our analysis, however, would not change were we to adopt Patent Owner’s definition.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner
“Patent Owner contends that claim construction is necessary for the “seed-applied substance” term because Petitioner allegedly ignores the teaching of the specification in evaluating the term. Prelim. Resp. 12. Patent Owner points to the specification, which defines a “seed-applied substance” as “includ[ing] any composition applied to seeds prior to the seeds being planted (e.g., when the seed comes in contact with the soil in a field).” Id. at 13 (quoting Ex. 1001, 7:45-48). Patent Owner contends that the term means “a substance that is applied directly to the seed before the seed comes into contact with the soil in a field.” Id. (citing Ex. 2001, ¶ 55). According to Patent Owner, Petitioner erroneously uses a definition that “allows the ‘seedapplied substance’ to be applied to the seed (and soil) as the seed lay planted in the soil.’” Id. For the purpose of addressing Petitioner’s grounds, we use the definition of “seed-applied substance” provided in the ’027 patent, i.e., “any composition applied to seeds prior to the seeds being planted (e.g., when the seed comes in contact with the soil in a field).” Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (“[A] patentee may choose to be his own lexicographer and use terms in a manner other than their ordinary meaning, as long as the special definition of the term is clearly stated in the patent specification or file history.”).” slip op. at 7
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“3. Analysis Our analysis of whether Wagers discloses the limitation “individually applying the desired application amount of the selected type of the seed-applied substance to each seed as it is being delivered to the soil” is dispositive of Petitioner’s challenge to claim 1 as anticipated.” slip op. at 10
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites GrahamPatents in suitUS 12,102,027 - Zhuhai Cosmx Battery Co., Ltd. v. Ninge Amperex Technology LimitedInstitution deniedPTAB · Aug 20, 2025 · IPR2025-00385 · APJ Debra L Dennett · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–10 were anticipated by Nishikawa or obvious over the asserted combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review under 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” For the reasons set forth below, upon considering the Petition and Preliminary Response, we determine that Petitioner has not established a reasonable likelihood of prevailing with respect to at least one challenged claim. Accordingly, we deny the Petition and decline to institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“Petitioner contends that A person of ordinary skill in the relevant art would typically hold an advanced degree in chemistry, material science, and/or a related discipline, and have at least two years of experience with designing and/or fabricating battery separators or have an equivalent level of education, training, and experience. Pet. 5. Patent Owner “adopts the definition proposed by Petitioner” for the purposes of the Preliminary Response. Prelim. Resp. 22. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s unopposed definition because it is consistent with the specification. We note that neither party indicated that the result would change under any different definition.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Absolute plastic deformation rate” and “relative plastic deformation rate” are the only claim terms disputed in this proceeding, and are clearly defined in the Specification and in claim 1. See Spec. 4:22–27, 4:47–54; 25:31–37. Because we determine that claim construction is not necessary to decide whether to institute, we do not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review). slip op. at 11
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“Petitioner’s arguments are unconvincing. Petitioner points to nothing in Nishikawa that allows a POSITA to determine L2 (defined as “a length of 4 Tensile strength is measured as force per units area, such as MPa or psi. One MPa equals one N/mm2. Nishikawa Table 1 discloses tensile strength in N/cm. Ex. 1004 Table 1. Petitioner makes calculations to convert the reported N/cm into N/m2 and then to GPa, but provides no explanation for why tensile strength is reported in N/cm or how it was measured. See Pet. 31. the porous substrate after the porous substrate is stretched to breakage and docked along the fracture caused by the breakage and flattened”) or L2 – L0. See generally Pet., Ex. 1004. Petitioner and its expert, Dr. Pecht, fail to adequately explain why tensile strength divided by Young’s modulus is “a proxy for L1 – L2” or why such a proxy is sufficient to disclose the limitation as stated. Instead, we are required to rely on “approximations” and “estimates” with insufficient explanation of why such they are appropriate or adequate. See Pet. 26, 30, 32; see also Ex. 1003 ¶¶ 97, 105–108, 111.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,964,927 - Lam Research Corp. v. Inpria Corp.All claims unpatentablePTAB · Apr 18, 2025 · IPR2024-00033 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1–12 are unpatentable as anticipated by the ’888 Publication; Patent Owner’s motion to add substitute claims 13–23 is granted.
RulingsFinal written decision- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner
“priority issue are based on the cited disclosures of the ’867 application discussed above. Ex. 2009 ¶ 29. For the reasons discussed above, we do not view the cited disclosures as sufficiently supporting Dr. Banerjee’s conclusion that the ’867 application provides support for claim 1’s average thickness range (id.) and, therefore, give this testimony little weight. Stated somewhat differently, Dr. Banerjee’s advances an opinion (really a legal one) that is not supported by the facts and not in line with the caselaw discussed in this section (such as RAI).” slip op. at 26
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityReference is prior artPrinted publication establishedDecided for petitioner
“priority issue are based on the cited disclosures of the ’867 application discussed above. Ex. 2009 ¶ 29. For the reasons discussed above, we do not view the cited disclosures as sufficiently supporting Dr. Banerjee’s conclusion that the ’867 application provides support for claim 1’s average thickness range (id.) and, therefore, give this testimony little weight. Stated somewhat differently, Dr. Banerjee’s advances an opinion (really a legal one) that is not supported by the facts and not in line with the caselaw discussed in this section (such as RAI).” slip op. at 26
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“d) Conclusion For the reasons discussed above, Petitioner has demonstrated by a” slip op. at 30
- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted
“For these reasons, Patent Owner has met its burden to show by a” slip op. at 34
Patent outcomesUS 9,823,564 unpatentable§ 102 anticipationcites Phillips · KSR · Graham · NautilusPatents in suitUS 9,823,564 - PTAB · Jan 27, 2025 · IPR2024-00965 · APJ Zhenyu Yang · IPR · Institution
Instituted review of claims 1–6 on all asserted grounds because Petitioner showed a reasonable likelihood of prevailing on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons provided below, we determine Petitioner has satisfied the threshold requirement set forth in 35 U.S.C. § 314(a). Accordingly, we institute inter partes review of all challenged claims based on the ground raised in the Petition.” slip op. at 2
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedInstituted
“We agree with Patent Owner that testimony from a “custodian with any personal knowledge of arXiv.org or its regular practices” would have strengthened Petitioner’s argument that Gloor is prior art. See Prelim. Resp. 20; see also, e.g., Murray & Poole Enters. LTD v. Institut De Cardiologie De Montreal, IPR2023-01064, Paper 49 (PTAB Jan. 14, 2025) (considering testimony regarding the internet archive service known as the Wayback Machine (https://web.archive.org/) in determining public accessibility). At the institution stage, however, Petitioner needs to show that Gloor qualifies as prior art by “a reasonable likelihood” standard. See Hulu, LLC, v. Sound View Innovations, LLC, IPR2018-01039, Paper 29, 13 (PTAB Dec. 20, 2019) (precedential) (“[A]t the institution stage, the petition must identify, with particularity, evidence sufficient to establish a reasonable likelihood that the reference was publicly accessible before the critical date of the challenged patent and therefore that there is a reasonable likelihood that it qualifies as a printed publication.”). We find that, for purposes of institution, Petitioner has met its burden to show a reasonable likelihood that Gloor was publicly accessible before the priority date of the ’200 patent. To prevail in this inter partes review, Petitioner must meet the preponderance of the evidence standard. See 35 U.S.C. § 316(e). Thus, we encourage the parties to fully develop the record during trial to facilitate the ultimate resolution of this issue.” slip op. at 9
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“institution under § 325(d). Prelim. Resp. 21–29. Under 35 U.S.C. § 325(d), in determining whether to institute an inter partes review, “the Director may take into account whether, and reject the petition or request because, the same or substantially the same prior art or arguments previously were presented to the Office.” Our § 325(d) analysis employs a two-prong framework: (1) whether the arguments presented in the petition are the same or substantially the same as those previously presented to the Office; and (2) if so, whether the petitioner has demonstrated a material error by the Office in its prior consideration of those arguments. Advanced Bionics, LLC v. Med-El Electromedizinishe Gerӓte GmbH, IPR2019-01469, Paper 6 (“Advanced Bionics”), 8 (PTAB Feb. 13, 2020) (precedential).” slip op. at 11
§ 102 anticipationDiscretionary denialcites PhillipsPatents in suitUS 11,768,200 - PTAB · Jan 27, 2025 · IPR2024-00964 · APJ Zhenyu Yang · IPR · Institution
The Board instituted IPR on claims 1–8 based on both asserted obviousness grounds: Parameswaran with Gloor and Parameswaran with Bentley.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons provided below, we determine Petitioner has satisfied the threshold requirement set forth in 35 U.S.C. § 314(a). Accordingly, we institute inter partes review of all challenged claims based on the ground raised in the Petition.” slip op. at 2
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“We agree with Patent Owner that testimony from a “custodian with any personal knowledge of arXiv.org or its regular practices” would have strengthened Petitioner’s argument that Gloor is prior art. See Prelim. Resp. 27; see also, e.g., Murray & Poole Enters. LTD v. Institut De Cardiologie De Montreal, IPR2023-01064, Paper 49 (PTAB Jan. 14, 2025) (considering testimony regarding the internet archive service known as the Wayback Machine (https://web.archive.org/) in determining public accessibility). At the institution stage, however, Petitioner needs to show that Gloor qualifies as prior art by “a reasonable likelihood” standard. See Hulu, LLC, v. Sound View Innovations, LLC, IPR2018-01039, Paper 29, 13 (PTAB Dec. 20, 2019) (precedential) (“[A]t the institution stage, the petition must identify, with particularity, evidence sufficient to establish a reasonable likelihood that the reference was publicly accessible before the critical date of the challenged patent and therefore that there is a reasonable likelihood that it qualifies as a printed publication.”). We find that, for the purposes of institution, with Dr. Gloor’s declaration and the supporting exhibits attached therein, Petitioner has met this burden. To prevail in this inter partes review, Petitioner must meet the preponderance of the evidence standard. See 35 U.S.C. § 316(e). Thus, we encourage the parties to fully develop the record during trial to facilitate the ultimate resolution of this issue.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“detailed analysis to support its argument that the combination of Parameswaran and Gloor teaches or suggests each limitation of claim 1. Pet. 23–36. Petitioner also contends that an ordinarily skilled artisan would have been motivated combine the teachings of the two references and would have had a reasonable expectation of success in doing so. Id. at 36–45. Patent Owner counters that the combination does not teach or suggest two limitations, namely the amplifying and discarding steps of the method. Prelim. Resp. 18–24. Patent Owner also challenges Gloor’s prior art status. Id. at 24–28. Based on the current record, we find Petitioner’s argument with respect to the amplifying and discarding steps more persuasive. With respect to the remaining limitations, we find persuasive Petitioner’s analysis on the prior art’s teachings. We also find persuasive Petitioner’s analysis on the motivation to combine and reasonable expectation of success. For the purposes of institution, we adopt those analyses as our own. We address Patent Owner’s counterarguments below.” slip op. at 9
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“cross-over events (id. at 18–21). Based on the current record, we find Petitioner’s argument more persuasive. Petitioner relies on the combination of Parameswaran and Gloor as teaching the amplifying step. See Pet. 31–33. As such, Patent Owner cannot show non-obviousness “by attacking references individually.” In re Keller, 642 F.2d 413, 426 (CCPA 1981). Patent Owner argues that “because Parameswaran used pyrosequencing on the surface of beads in a Roche 454 sequencer, it does not disclose the formation of clusters.” Prelim. Resp. 21 (citing Pet. 31). Petitioner, however, relies on Gloor for teaching “amplifying said nucleic acid templates on a surface of a flow cell thereby to form clusters.” Pet. 31–32. Patent Owner does not challenge this reliance. See generally Prelim. Resp. Patent Owner contends that Petitioner “equat[es] the claimed chimeric sequences with ‘mismatched’ or ‘misassigned’ sequences containing an ‘unexpected’ pair of forward and reverse barcode motifs identified in Parameswaran.” Prelim. Resp. 18–19. But, according to Patent Owner, “Petitioner does not point to any disclosure in Parameswaran identifying these “mismatched” motifs as chimeric sequences—as opposed to mere sequencing or sample handling error—nor does Petitioner cite any disclosure in Parameswaran regarding such sequences resulting from cross-over events.” Id. at 19. We find Patent Owner’s characterization of Petitioner’s argument inaccurate. As we understand it, Petitioner does not “equat[e]” the claimed chimeric sequences with “mismatched” sequences in Parameswaran. Instead, as Patent Owner acknowledges, “Petitioner argues that ‘sequences with mismatched barcode motifs’ in Parameswaran ‘include chimeric sequences resulting from cross-over events.’” Id. (quoting Pet. 32) (emphasis added).” slip op. at 14
§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 11,041,852 - PTAB · Jan 13, 2025 · IPR2024-01156 · APJ Jeffrey N Fredman · IPR · Institution
The Board instituted inter partes review of claims 1–30 on all grounds, finding it more likely than not that the claims are unpatentable.
RulingsInstitution decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“On the current record, there is no controversy over the meaning of any of the claim terms and neither party identifies a claim construction that would impact our analysis. We therefore find that, at this stage of the proceeding, there are no terms that need claim construction. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 7
- Skill levelSkill level petitioner adoptedDecided for petitioner
“VIII. LEVEL OF ORDINARY SKILL IN THE ART Petitioner asserts (without opposition): A person of ordinary skill in the art (“POSA”) at the time of invention would have a working knowledge of microbiology and would have been involved in developing testing methodologies for analysis of samples such as food products (“validation methodologies”). The POSA would most likely have an advanced degree in microbiology, food science, or animal science and at least two years of work experience but may alternatively have a bachelor’s degree in those areas and at least four years of experience with validation methodologies. The POSA would have been familiar with relevant scientific literature and industry regulations, directives, and guidelines relating to validation methodologies.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“Determining whether claims are anticipated involves a two-step analysis. The first step involves construction of the claims of the patent at issue. Claim construction is a question of law reviewed de novo.” In re Aoyama, 656 F.3d 1293, 1296 (Fed.Cir.2011). “The second step [of an anticipation analysis] involves comparing the claims to the prior art. Anticipation is a question of fact reviewed for substantial evidence.” In re Aoyama, 656 F.3d at 1296. “A prior art reference anticipates a patent claim under 35 U.S.C. § 102(b) if it discloses every claim limitation.” In re Montgomery, 677 F.3d 1375, 1379 (Fed. Cir. 2012). A reference may anticipate inherently if a claim limitation that is not expressly disclosed “is necessarily present, or inherent, in the single anticipating reference.” Verizon Servs. Corp. v. Cox Fibernet Va., Inc., 602 F.3d 1325, 1337 (Fed. Cir. 2010). slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“The motivation-to-combine analysis is a flexible one. “[A]ny need or problem known in the field of endeavor at the time of invention and addressed by the patent can provide a reason for combining the elements in the manner claimed,” [but the] “analysis ‘need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.’” Intel Corp. v. PACT XXP Schweiz AG, 61 F.4th 1373, 1379–80 (Fed. Cir. 2023) (quoting KSR, 550 U.S. at 418, 420 (emphasis added)). “[I]f there’s a known technique to address a known problem using ‘prior art elements according to their established functions,’ then there is a motivation to combine,” because KSR explains that “if a technique has been used to improve one device [or method], and a person of ordinary skill in the art would recognize that it would improve similar devices [or methods] in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” Id. at 1380 (quoting KSR, 550 U.S. at 417; and Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 797 (Fed. Cir. 2021)). If addressing a known problem, the prior art combination need not be “the best option, only . . . a suitable option.” Id. (quoting Intel, 21 F.4th at 800 (emphasis original)).” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,845,486 - PTAB · Nov 8, 2024 · IPR2024-00834 · APJ Tawen Chang · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood of unpatentability and declining discretionary denial under §§ 325(d) and 314.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (2012) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to Patent Owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015) (discussing the burden of proof in inter partes review). The Board may authorize an inter partes review if we determine that the information presented in the Petition and Patent Owner’s Preliminary Response shows a reasonable likelihood that Petitioner will prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314(a).” slip op. at 16
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“anticipated by Sonti. Pet. 3. To show anticipation under 35 U.S.C. § 102, each and every claim element, arranged as in the claim, must be found in a single prior art reference. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359 (Fed. Cir. 2008). The prior art need not, however, use the same words as the claims to find anticipation. In re Gleave, 560 F.3d 1331, 1334 (Fed. Cir. 2009). In evaluating anticipation, it is permissible to take into account not only the literal teachings of the prior art reference, but also the inferences the skilled artisan would draw from it. Eli Lilly and Co. v. Los Angeles Biomedical Res. Inst. At Harbor-UCLA Med. Ctr., 849 F.3d 1073, 1074–75 (Fed. Cir. 2017) (holding that the “dispositive question regarding anticipation is whether one skilled in the art would reasonably understand or infer from a prior art reference that every claim element is disclosed in that reference”). As such, “a reference can anticipate a claim even if it does not expressly spell out all the limitations arranged or combined as in the claim, if a person of skill in the art, reading the reference, would at once envisage the claimed arrangement or combination.” Kennametal, Inc. v. Ingersoll Cutting Tool Co., 780 F.3d 1376, 1381 (Fed. Cir. 2015) (internal quotation and alteration marks omitted).” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“b. Reasonable Expectation of Success Petitioner asserts that an ordinarily skilled artisan would have been motivated, with a reasonable expectation of success, to topically administer 1% tapinarof composition once a day to treat mild to severe plaque psoriasis in view of Sonti’s teaching to apply its compositions (including 1% tapinarof compositions) in various application frequencies (including once daily) to treat moderate to severe plaque psoriasis. Pet. 29–30 (citing, e.g., Ex. 1003 ¶¶ 182–184, 187–188; Ex. 1005 Abstract, ¶¶ 55, 196, 288, 387).” slip op. at 32
- Obviousness (§103) › Objective indicia / secondary considerationsInstituted
“d. Objective Indicia of Non-obviousness Patent Owner asserts that, although the “Petition notes the patent’s ‘surprising[] and unexpected[]’ finding that once daily application of 1% tapinarof cream was just effective as twice daily application, . . . the Petition does not analyze, as the law requires, this surprising, unexpected finding in its obviousness arguments.” Prelim. Resp. 52. We are not persuaded by this argument. Immediately after the Petition’s acknowledgement that “[t]he specification [of the ’088 patent] contends that it was ‘surprisingly’ found that once daily application was just as effective as twice daily,” the Petition notes that, “[h]owever, during prosecution the examiner cited a set of prior art by Chen et al. disclosing treating plaque psoriasis by topically applying a composition containing 1% tapinarof once a day.” Pet. 1 (footnote omitted). Indeed, Patent Owner acknowledges that Petitioner counters “Applicant’s surprising and unexpected findings” by referring to the Chen references cited during prosecution, but asserts that “Chen . . . does not undermine Applicant’s surprising and unexpected findings” because “Chen discloses applying a composition containing 1% mixture of cis and trans 3,5-dihydroxy-4-isopropylstilbene, and not one containing 1% tapinarof (3,5-dihydroxy-4-isopropyl-trans-stilbene).” Prelim. Resp. 52–53.16 As 16 Patent Owner refers to its earlier discussion on this issue. Prelim. Resp. 53 (“As already discussed . . .”). That earlier discussion is with respect to the Chen references cited in Sonti (i.e., Exs. 1012 & 1013), not the Chen 40” slip op. at 40
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,590,088 - Fusion Orthopedics, LLC v. Extremity Medical, LLCSome claims unpatentablePTAB · Nov 4, 2024 · IPR2023-00894 · APJ Robert A Pollock · IPR · Final written decision
Claims 1–10 and 12–15 are unpatentable; claim 11 was not shown unpatentable. Substitute claims 16–25 and 27–30 are unpatentable over Mazur; claim 26 was not reached.
RulingsFinal written decision- BurdenMixed
“It is of the utmost importance that petitioners in the IPR proceedings adhere to the requirement that the initial petition identify ‘with particularity’ the ‘evidence that supports the grounds for the challenge to each claim.’” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369 (Fed. Cir. 2016) (quoting 35 U.S.C. § 312(a)(3)). Here, however, not until its Reply does Petitioner belatedly suggest that Ferrante’s disclosure of bone screws with self-tapping ends equally meets the limitation of claim 10 (with respect to the first member) as with claim 11 (with respect to the second member), and that both claims are obvious in light of “evidence” from Ferrante “that it was well known to equip bone screws with self-tapping ends.” Reply 26–27. We do not discern these arguments in the Petition, and consider them waived. See Netflix, Inc. v. DivX, LLC, 84 F.4th 1371,1377 (Fed. Cir. 2023) (“While the Board should not take an overly mechanistic view of a petition and decline to address an argument because the petitioner did not present it with ideal vigor and clarity, the Board should also not have to decode a petition to locate additional arguments beyond the ones clearly made.”). In sum, Petitioner’s error in failing to first address limitations of claim 10 in the Petition specific to the Cognet/Ferrante combination indicates a failure to meet the particularity requirements for what must be in the petition and cannot be left to be filled in on reply. See 35 U.S.C. § 312(a)(3); 37 C.F.R. §§ 42.22(a)(2) (requiring, among other things, “a detailed explanation of the significance of the evidence”), 42.104(b)(4)–(5) (requiring that petition “specify where each element of the claim is found in the prior art patents or printed publication relied upon” and, regarding submitted evidence, state “the relevance of the evidence to the challenge raised, including identifying specific portions of the evidence that support the challenge”). Microsoft, 2022 WL 989403, at *6. Accordingly, Petitioner has not shown persuasively that claim 11 would have been obvious in light of Cognet and Ferrante for the reasons set forth in the Petition. slip op. at 41
- Expert testimonyPetitioner expert creditedDecided for petitioner
“We also find persuasive Mr. Dominguez’s explanation that one of ordinary skill in the art would have understood “bore” as including stepped diameter holes, sometimes described as a bore having a counterbore. See generally Ex. 1018 ¶¶ 4–29; Reply 3–10. Three of Mr. Dominguez’s illustrative examples are reproduced in the annotated figures below. The above figures show Mr. Dominguez’s annotated illustrations from the Jackson (Ex. 1019, Fig. 3), Brånemark (Ex. 1021, Fig. 4), and Ray (Ex. 1025, Fig. 1) references as discussed at paragraphs 10, 12, and 13, respectively, of Mr. Dominguez’s Second Declaration. With reference to the above figures, Mr. Dominguez testifies that “Jackson describes a bone repair set screw in which ‘[t]he bore 27 comprises a first bore section 31, a second bore section 32,’ etc. delineated by shoulders 41, 42, etc. (Ex. 1019, 5:24– 43)” (Ex. 1018 ¶ 10); “Brånemark describes an osseous implantation device having body 1ʺ with first and second holding portions 21ʺ, 31ʺ and ‘an inner through bore with a first portion 4ʺ in the first holding portion and a second portion 5ʺ in the second holding portion.’” Ex. 1021, 4:44–46” (id. ¶ 12); and Ray discloses surgical calipers including “handle 12 having ‘stepped cylindrical bore 14,’” wherein “[c]ollar 20 of a shaft inserted in the bore ‘rests against a step of the bore 14’ (2:14–15)” (id. ¶ 13). Patent Owner responds that Mr. Dominguez’s examples “that allegedly show a single bore encompassing two or more stepped-diameter holes or a counterbore . . . . are specific to these references and divorced from the disclosures of the ’166 patent.” Sur-Reply 7. Insofar as the ’166 patent makes no mention of the term “bore” outside the claims, and Mr. Dominguez’s examples are all taken from the field of orthopedic surgery, we do not find this argument persuasive. Patent Owner further appears to contend that exemplary references to a “cylindrical stepped down bore” or a “stepped cylindrical bore” are too specific to be within the scope of the term “bore.” Sur-Reply 7–8. As these terms merely describe species within a larger genus, and Patent Owner presents no cogent reason to exclude them, we do not find this argument availing. Relatedly, we are also not persuaded by Patent Owner’s argument that “the prior art treats a ‘bore’ as an element that is distinct from a ‘counterbore.’” Id. at 8. Rather, we credit Mr. Dominguez’s testimony that “[a] counterbore is not a structure unto itself, a counterbore is part of a larger structure” as exemplified by numerous examples including Laps (Ex. 1028 ¶ 33 (sensor assembly wherein “bore 16 includes a counterbore 18”)); Martinez (Ex. 1029, 3:61 (surgical cutting instrument wherein “bore 56 has a counterbore 64”)); Zang (Ex. 1030, 2:49 (bone anchor having a “bore [that] includes a counterbore”)); Ledet (Ex. 1022, 29:3–5 (vertebral fixation plate having “through holes . . . . countersunk, or counterbored to accommodate the head of a bone screw”)); Seo (Ex. 1031, 3:45 (chair leg employing “counterbored bore 23”)); and Exner (Ex. 1032, 2:16 (extrusion press including “counterbored axial bore 6”)). Ex. 1018 ¶¶ 17–23. That a reference may refer to a figure as showing “bore 103” with “counterbore 105 . . . formed on one end” does not indicate that they are distinct structures as Patent Owner contends, but merely that the focus of each term is directed to the entire bore or to a particular aspect of the bore, i.e., its counterbore. See” slip op. at 22
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner subsequently proposed an alternative definition, as a person having “[a] Bachelor’s Degree in biomedical and/or mechanical engineering or similar training and . . . at least three years of experience with implant devices used for internal fixation of bones.” POR 5 (citing Ex. 2012 ¶¶ 32–33). According to Patent Owner, “[t]his hypothetical person would be capable of performing various design tasks and would understand the basic mechanical features and operation of orthopaedic implant devices [and] have an appreciation for orthopaedic fusion techniques and the medical issues and concerns faced by a doctor/surgeon charged when performing operations to implant orthopaedic devices.” Id. Despite some differences in wording, Patent Owner asserts (and Petitioner does not contest) that any “distinction between the parties’ proposed definitions of a POSITA does not affect the arguments set forth herein.” Id. (citing Ex. 2012 ¶ 34). Consistent with this view, we find the parties’ constructions equally applicable in light of the prior art of record and the disclosure of the ’166 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). We adopt, for convenience, Petitioner’s definition, but our analysis does not change depending on which of the two articulations are applied here. H.” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“one of ordinary skill in the art would understand that “bore,” as used in the context of claims 1 and 12, encompasses a multi-diameter passage, and in particular, one having stepped longitudinal cross sections such as that shown in Cognet’s Figure 1. See generally DI 11–13. For the reasons that follow, we conclude that one of ordinary skill in the art would have understood “bore” as such. Relying on the testimony of Mr. Dominguez, Petitioner initially proposed a construction of “bore” as “a usually cylindrical hole made by or as if by the turning or twisting movement of a tool.” Pet. 16 (citing Ex. 1002 ¶ 58). Petitioner’s proposal relied on Mr. Dominguez’s testimony that “[a] bore is a cylindrical hole made by the spinning rotation of a twist drill cutting tool. It is typically made by removing material from a solid or hollow object, similar to a tunnel or orifice.” Ex. 1002 ¶ 58. Pointing to its annotation of Cognet’s Figure 1, above, Patent Owner argued that that the term “bore” excludes a tunnel made by “two adjacent bores.” See Prelim. Resp. 21–25. In view of the then-available evidence, we provisionally construed “bore” as a hole or passage made by or as if by the turning or twisting movement of a tool such that its interior walls have cylindrical lateral cross-sections, and which do not exclude holes or passages having tapered or stepped longitudinal cross-sections. DI 13.” slip op. at 19
Patent outcomesUS 11,298,166 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,298,166
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.