- PTAB · Nov 21, 2025 · IPR2025-00956 · APJ Ryan H Flax · IPR · Institution
The Board instituted IPR on claims 1–12 under all asserted grounds, finding a reasonable likelihood that at least one claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute trial in an inter partes review. We institute an inter partes review only if the information presented in the petition filed under 35 U.S.C. § 311, and any preliminary response filed under § 313, shows that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314. After reviewing the parties’ submissions in view of the existing record, we conclude that Petitioner demonstrates a reasonable likelihood it would prevail in showing that at least one challenged claim of the ’992 patent is unpatentable under the presented grounds. See Pet. Therefore, we grant institution of inter partes review. Our reasoning is discussed below. A.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“These two proposed definitions of the ordinarily skilled artisan share many consistencies, for example, the types of degrees and experience such a person would have had, but differ in the number of years of experience. Petitioner proposes the ordinarily skilled artisan would have had at least five years of experience and Patent Owner proposes at least three years (which would necessarily include five years, too). Patent Owner also proposes that the ordinarily skilled artisan would have consulted a dentist, oral surgeon, prosthodontist, or periodontist with experience in dental implants and prosthetics. At this point, we find little meaningful difference between the two proposed definitions. In fact, neither does Patent Owner’s witness, Mr. Leinsing, who states that his “opinions would not change under either definition.” Ex. 2011 ¶ 40. Thus, at this stage, we accept and use Petitioner’s proposed definition of the ordinarily skilled artisan, which, unlike Patent Owner’s, does not implicate reliance on the knowledge of people other than the individual ordinarily skilled artisan. Petitioner’s definition appears to comport with the level of skill in the art reflected in the prior art of record and the ’992 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). This parties may further developed this issue at trial, if desired. C.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“The Board interprets claim terms in an inter partes review using the same claim construction standard that is used to construe patent claims in a civil action in federal district court. 37 C.F.R. § 42.100(b). In construing claims, district courts and the Board here, by default, give claim terms their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc).” slip op. at 14
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateNot entitled to earlier dateDecided for petitioner
“Here, the first claim limitation at issue is broad, i.e., different thread pattern/profile between a definite and a temporary screw, and the Specification’s and priority applications’ disclosure is narrow and specific, asymmetric buttress style threads in a temporary screw and symmetrical threads in a definite screw (are different). Any apparent predictability in or maturity of the relevant field here must be contrasted with the fact that the Specification, considering the ’992 patent itself or any of the identified priority applications, never once even discusses the (claimed) concept of specifically differing the thread style between a temporary and a definitive screw. Any differences in thread style are not called out by the disclosure, but are described and can be discerned only in relation to the respective threads’ functionality, i.e., Fig. 75’s temporary screw 190 has buttress-style threading so it can be pulled out rather than unscrewed from the abutment; Fig. 9’s definitive screw 75 has male threads that fill the female threads of the abutment 8 for a secure permanent engagement. Ex. 1001, 15:23–30, 21:25–44, 23:3–36; Ex. 1012, 97–98, Figs. 9, 75. And, although it is possible for a single disclosed species to provide written description support for a claimed genus, “a sufficient description of a genus . . . requires the disclosure of either a representative number of species falling within the scope of the genus or structural features common to the members of the genus so that one of skill in the art can ‘visualize or recognize’ the members of the genus.” Ariad, 598 F.3d at 1350; see also Synthes USA, LLC v. Spinal Kinetics, Inc., 734 F.3d 1332, 1344 (Fed. Cir. 2013). That does not appear to be the case here—the present record does not support that the described asymmetrical buttress, serrated style of different temporary screw threading (relative to that of the definitive screw and regardless of the direction of the threads for rotation) is sufficiently representative of the genus’s “different” thread patterns/profiles. See, e.g., Ex. 1006 (a buttress style thread does not function the same as a buttress reverse or 75º joint profile or rounded, or trapezoidal thread).” slip op. at 30
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · GrahamPatents in suitUS 11,937,992 - PTAB · Nov 20, 2025 · IPR2025-00951 · APJ Eric C Jeschke · IPR · Institution
The Board instituted IPR on claims 1–19 and all asserted grounds, finding a reasonable likelihood that claim 1 would have been obvious over DuroMax and De Vries.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a) (2024) (“The Board institutes the trial on behalf of the Director.”). Inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314. Upon consideration of the evidence and arguments in the record, for the reasons below, we determine that the information presented shows a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. We thus institute inter partes review on all challenged claims on all asserted grounds. See SAS Inst. Inc. v. Iancu, 584 U.S. 357, 362–63, 369–70 (2018); 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“For purposes of this Decision, we adopt the definition of the level of ordinary skill in the art proposed by Petitioner. As to the inclusion of physics in Petitioner’s definition, Patent Owner acknowledges that an undergraduate mechanical engineering degree holder would have the requisite knowledge here but does not adequately explain why an undergraduate physics degree holder would not. In addition, Patent Owner requires “a four-year degree in mechanical engineering or a closely related field,” but fails to identify what fields are “closely related.” See Prelim. Resp. 10 (emphasis added). Based on the Winkel Declaration, we are persuaded at this stage that a hypothetical undergraduate physics degree holder would have had adequate knowledge for one of ordinary skill in the art of the invention here. See Winkel Decl. ¶ 106. As to the requisite years of experience proposed in the definitions— three for Petitioner versus “at least one” for Patent Owner—we note that Patent Owner’s definition is broader than, but includes, Petitioner’s definition. Moreover, for both the inclusion of physics and the years of experience issues, Patent Owner acknowledges that the arguments in the Preliminary Response “are not impacted based on which definition is applied.” Prelim. Resp. 10. Further, Patent Owner does not argue at this stage that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“At this stage of the proceeding and on the current record, we need not and do not explicitly construe the phrase “selector switch.” See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Although we do not expressly adopt Petitioner’s proposed construction at this stage of the proceeding, we note that it at least generally aligns with the tentative claim construction issued by the United States District Court in the California Litigation: “Mechanical device whose positioning precludes simultaneous access to two fuels.” Ex. 300310 at 2; see also 37 C.F.R. § 42.100(b) (“Any prior claim construction determination concerning a term of the claim in a civil action, or a proceeding before the International Trade Commission, that is timely made of record in the inter partes review proceeding will be considered.”); Memorandum from Acting Director Coke Morgan Stewart to Members of the Patent Trial and Appeal Board (Sept. 15, 2025), available at https://www.uspto.gov/sites/default/files/documents/ Memo_re_prior_findings_of_fact_and_conclusions_of_law_9_16_25.pdf (“Prior Determinations Memo”) (discussing PTAB consideration of prior findings of fact and conclusions of law). We also note that Patent Owner” slip op. at 14
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“Like the Federal Circuit in In re Ellis, although the patent classification of the reference is “some evidence of ‘non-analogy, . . . we consider the similarities and differences in structure and function of the inventions . . . to carry far greater weight.” In re Ellis, 476 F.2d at 1372 (affirming the Board and rejecting the applicant’s nonanalogous art argument). Here, the challenged patent discusses in the Background of the Invention the need for a way to “prevent both valves from being ‘on’ at the” slip op. at 21
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 10,598,101 - PTAB · Nov 13, 2025 · IPR2025-00805 · APJ Eric C Jeschke · IPR · Institution
The Board instituted IPR on claims 1–24 and all asserted grounds, finding a reasonable likelihood that Petitioner would prevail on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a) (2024) (“The Board institutes the trial on behalf of the Director.”). Inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314. Upon consideration of the evidence and arguments in the record, for the reasons below, we determine that the information presented shows a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. We thus institute inter partes review on all challenged claims on all asserted grounds. See SAS Inst. Inc. v. Iancu, 584 U.S. 357, 362–63, 369–70 (2018); 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”).” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached
“C. Patent Owner’s Arguments Under 35 U.S.C. § 325(d) In the Preliminary Response, Patent Owner contends that Petitioner’s unpatentability arguments presented in this proceeding were previously considered by the USPTO. See Prelim. Resp. 31–33. In her decision referring this matter to the Board, then-Acting Director Stewart rejected that argument. See Paper 20 at 2–3 (discussing why “Petitioner provides persuasive reasoning, supported by evidence, that discretionary denial under 35 U.S.C. § 325(d) is not appropriate”); see also Prelim. Resp. 31–33 (referring to and citing Patent Owner’s Discretionary Denial Brief (Paper 8)). We need not and do not address this issue further.” slip op. at 15
- Skill levelSkill level petitioner adoptedDecided for petitioner
“For purposes of this Decision, we adopt the definition of the level of ordinary skill in the art proposed by Petitioner. As to the inclusion of physics in Petitioner’s definition, Dr. Singhose (a professor of mechanical engineering) testifies as to why undergraduate mechanical engineering degree holders would have the requisite knowledge here, but does not testify that undergraduate physics degree holders would not. See Singhose Decl. ¶¶ 2, 27, 28. In addition, Patent Owner and Dr. Singhose require “a four-year degree in mechanical engineering or a closely related field,” but fail to identify what fields are “closely related.” See Prelim. Resp. 11; Singhose Decl. ¶ 27. Based on the Morse Declaration, we are persuaded at this stage that a hypothetical undergraduate physics degree holder would have adequate knowledge for one of ordinary skill in the art of the invention here. See Morse Decl. ¶ 31. As to the requisite years of experience proposed in the definitions— three for Petitioner versus “at least one” for Patent Owner—we note that Patent Owner’s definition is broader than, but includes, Petitioner’s definition. Moreover, for both the inclusion of physics and the years of experience issues, Patent Owner acknowledges that the arguments in the Preliminary Response “are not impacted based on which definition is applied.” Prelim. Resp. 12 (citing Singhose Decl. ¶¶ 30–34). Further, Patent Owner does not argue at this stage that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would understand either the challenged patent or the prior art.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“B. Claim Construction In inter partes reviews, the Board interprets claim language using the same claim construction standard that would be used in a civil action under 35 U.S.C. § 282(b), as described in Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). See 37 C.F.R. § 42.100(b). Under that standard, we generally give claim terms their ordinary and customary meaning, as would be understood by a person of ordinary skill in the art at the time of the invention, in light of the language of the claims, the specification, and the prosecution history. See Phillips, 415 F.3d at 1313–14. Although extrinsic evidence, when available, may also be useful when construing claim terms under this standard, extrinsic evidence should be considered in the context of the intrinsic evidence. See id. at 1317–19. Petitioner does not propose express constructions for any claim terms. Pet. 12. Patent Owner also does not propose any express constructions. See Prelim. Resp. 12. On the current record, we need not construe explicitly any claim terms. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). As discussed below, however, the parties dispute the meaning of “gaseous fuel.” We address this issue below in the analysis of the challenge to claims 1–3, 5–9, and 18 based on Nakafushi and Olmr.” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites PhillipsPatents in suitUS 10,393,034 - Exotec Product France SAS / Exotec North America Inc. et al. v. Opex CorporationAll claims unpatentablePTAB · Oct 28, 2025 · IPR2024-00850 · APJ Arthur M Peslak · IPR · Final written decision
Claims 1, 3–12, 14, and 23–27 are unpatentable as obvious over Raizer and Hangzhou.
RulingsFinal written decision- Skill levelOther
“B. Level of Ordinary Skill in the Art We consider the asserted grounds of unpatentability in view of the” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“C. Claim Construction Neither Petitioner nor Patent Owner proposes an express construction” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR, 550 U.S. at 417. In this case, we must determine whether one of ordinary skill in the art would recognize that Hangzhou’s disclosure of driving its auto-guided trolleys 200 under shelves 100 would improve the operation of Raizer’s system in the same way. For us to resolve this question in Petitioner’s favor, Petitioner must provide “some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” Id. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)). However, bodily incorporation, i.e., “an actual physical substitution of” Hangzhou’s auto-guided trolleys or operating software into Raizer’s system, is not required. See In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“It is well-established that a determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.”); In re Nievelt, 482 F.2d 965, 968 (CCPA 1973) (“Combining the teachings of references does not involve an ability to combine their specific structures.”).” slip op. at 23
Patent outcomesUS 11,472,632 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,472,632 - PTAB · Oct 23, 2025 · IPR2025-00989 · APJ Timothy G Majors · IPR · Institution
The Board instituted IPR on all challenged claims based on the asserted grounds, finding a reasonable likelihood of success on the Schaffer-Hartley and Schaffer-Eller combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless it is determined that there is a reasonable likelihood that the petitioner will prevail with respect to at least one of the claims challenged in the petition. For reasons explained below, we conclude that Petitioner shows a reasonable likelihood that it will prevail with respect to at least one of the ’291 patent’s challenged claims. We institute inter partes review on all challenged claims. See SAS Inst. Inc. v. Iancu, 584 U.S. 357, 362–63 (2018); 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”). Findings and conclusions at this stage are preliminary and based on the current record. Any final decision will be based on a full trial record.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“We agree with Patent Owner that Petitioner’s proposed POSA definition lacks specificity. That definition, if interpreted generically, could mean that a person may qualify as a POSA if they had, for example, a B.S. in mechanical engineering and only two years of experience designing or engineering any type of product in any field. That is too broad. We find that a POSA would have had the agreed-upon educational credentials—an undergraduate degree in mechanical engineering or a related engineering discipline. Ex. 1003 ¶ 36; Ex. 2001 ¶ 73. We find that a POSA would also have had 2–4 years of design or engineering experience related to products in the field of the invention, which involves endovascular devices and the surgical procedures that use such devices. Ex. 1001, 1:24–60 (background of the invention). Such devices include, but are not necessarily limited to, hemostasis valves and catheters for minimally-invasive vascular surgeries. Id. And, consistent with the testimony of the parties’ experts, the POSA need not have had firsthand experience designing hemostasis valves. See, e.g., Ex. 1029 (Zalesky Tr.), 72:11–73:7 (testifying direct experience “designing” hemostasis valves or aspiration catheters is not necessary, but “general experience with vascular devices and procedures” is required); Ex. 2006 (Thornton Tr.), 180:13–19. Further, as Dr. Zalesky testified, the POSA’s experience related to developing such devices “could be as simple as bench testing and looking at clinical data.” Ex. 1029, 74:5–75:1. Lastly, a POSA would have had an” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“As noted above, the challenged claims require a “filament formed in a loop around the tubular sidewall” where, when a portion of the filament is pulled away from the loop, the loop’s diameter reduces, thereby reducing the diameter of the lumen formed by the tubular sidewall to seal the valve. See supra Section II.D. Every embodiment in the ’291 patent where the filament is described as forming a “loop” in the manner claimed involves a filament that is necessarily flexible. See, e.g., Ex. 1001, 13:17–29, Figs. 6–7. The valve would not work if the looped filament were somehow inflexible— pulling an end of the filament would not change the diameter of the loop, and the valve would not seal. Ex. 2001 ¶ 65 (testifying “a loop in a rigid component would necessarily be fixed in size” and the “inherent property of flexibility is essential to the loop structure of the claims”); Ex. 1023, 16–17” slip op. at 17
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“We are unpersuaded that Schaffer describes a valve with a filament as claimed. If, as construed above (supra Section III.C), the filament requires flexibility, Petitioner has not demonstrated that Schaffer describes such a feature in its valves. Instead, we agree with Patent Owner that a POSA would more likely understand Schaffer’s two U-shaped actuating members as being rigid features. Prelim. Resp. 33–36. We agree with Patent Owner that Petitioner implicitly admits that Schaffer’s actuating members are rigid leakage around tools inserted through the central lumen when in use and compared to the use of a flexible string or wire (of Hartley or Eller). Prelim. Resp. 34 (citing Pet. 51). We also find Dr. Zalesky’s interpretation of Schaffer more plausible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being rigid structures. Ex. 2001 ¶¶ 78–85 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton opines that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 96. Such opinion invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Furthermore, Mr. Thornton’s opinion that a POSA “would have understood that Schaffer’s U-shaped actuating members would have preferably been formed from a thin, flexible material” finds no support in Schaffer itself. Ex. 1003 ¶ 95. This opinion is also at odds with his testimony in related cases about an alleged formation of gaps with Schaffer’s actuating members, which suggested those members had a set “size” and lacked flexibility. See IPR2025-01157 (Ex. 1003 ¶ 81 (testifying a POSA “would have recognized that Hartley’s flexible string may better seal the valve than Schaffer’s metallic/plastic actuating members” because, “if a tool did not fit the size of” slip op. at 31
Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,865,291 - Tanklogix, LLC v. Sitepro, Inc.Institution deniedPTAB · Oct 10, 2025 · IPR2025-00653 · APJ Bart A Gerstenblith · IPR · Institution
The Board denied institution on all claims because the Petition did not show a reasonable likelihood that any challenged claim was unpatentable over the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“An inter partes review may be instituted only if “the information presented in the petition . . . and any [preliminary] response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2024). For the reasons given below, on this record Petitioner has not established a reasonable likelihood that it would prevail in showing the unpatentability of any of the Challenged Claims. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“The parties’ proposed levels of ordinary skill in the art are similar, although Patent Owner proposes two years of experience along with a bachelor’s degree whereas Petitioner proposes “significant” experience. Patent Owner also proposes an alternative with more extensive experience in lieu of a bachelor’s degree. Although we find Petitioner’s proposed qualifications acceptable, we adopt Patent Owner’s proposed qualifications for the purposes of this Decision because they offer a wider range of qualifications that nonetheless comport with the level of ordinary skill necessary to understand and implement the teachings of the ’504 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). Our analysis and findings herein, however, do not turn on any differences in the parties’ proposed qualifications.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Additionally, only terms that are in controversy need to be construed, and these need be construed only to the extent necessary to resolve the controversy. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). The parties assert that each claim term should be construed in accordance with its plain and ordinary meaning. Pet. 9; Prelim. Resp. 4 (citing Ex. 2009 ¶ 72); see Ex. 1002 ¶ 22 (opining the same). And, in the respective claim construction sections of their briefs, the parties do not propose any claim terms for express construction. We agree with the parties that no claim terms require express construction to resolve the controversy before us. See Realtime Data, 912 F.3d at 1375.” slip op. at 13
- Expert testimonyPetitioner expert discountedDecided for patent owner
“Ex. 1002 ¶ 47. As reflected above, Dr. Wooley’s testimony as to element [1.2] does not even assert that Cardamone discloses a tank, let alone one or more sensors disposed at a tank as recited in element [1.2]. Thus, Dr. Wooley’s testimony does not support Petitioner’s argument on this issue.” slip op. at 18
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,726,504 - Tanklogix, LLC v. Sitepro, Inc.Institution deniedPTAB · Oct 10, 2025 · IPR2025-00652 · APJ Bart A Gerstenblith · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–23 and 25–30 were unpatentable over the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“presented in the petition . . . and any [preliminary] response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2024). For the reasons given below, on this record Petitioner has not established a reasonable likelihood that it would prevail in showing the unpatentability of any of the Challenged Claims. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“The parties’ proposed levels of ordinary skill in the art are similar, although Patent Owner proposes two years of experience along with a bachelor’s degree whereas Petitioner proposes “significant” experience. Patent Owner also proposes an alternative with more extensive experience in lieu of a bachelor’s degree. Although we find Petitioner’s proposed qualifications acceptable, we adopt Patent Owner’s proposed qualifications for the purposes of this Decision because they offer a wider range of qualifications that nonetheless comport with the level of ordinary skill necessary to understand and implement the teachings of the ’403 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). Our analysis and findings herein, however, do not turn on any differences in the parties’ proposed qualifications.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“The parties assert that each claim term should be construed in accordance with its plain and ordinary meaning. Pet. 10; Prelim. Resp. 4 (citing Ex. 2009 ¶ 73); see Ex. 1002 ¶ 22 (opining the same). And, in the respective claim construction sections of their briefs, the parties do not propose any claim terms for express construction. We agree with the parties that no claim terms require express construction to resolve the controversy before us. See Realtime Data, 912 F.3d at 1375.” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“We agree with Patent Owner that the Petition fails to demonstrate that Kahn discloses element [1.2] because the evidence cited does not disclose a “first computer system being configured to provide remote control of the first pump or first valve” (i.e., a fluid-handling device). Kahn is directed to providing access to fluid sensing data and analyzing and providing visual information on that data, but Petitioner has not identified any disclosure of the capability to remotely control fluid-handling devices. See, e.g., Ex. 1005, code (54), 1:27–36, 2:50–3:2. More specifically, Kahn’s disclosures that Petitioner relies on for allegedly teaching remote control are deficient. We discuss each. First, Petitioner points to the following, “[f]or instance, as illustrated in FIG. 1C, a fluid control device such as a valve 15A is located on the input side of a sen[s]or unit 110.” Ex. 1005, 8:19–21, cited in Pet. 13. This portion of Kahn, however, does not disclose remote control. Second, Petitioner cites to the following: Finally, or in addition to, the communication unit 112B can include on-site alerts such as optical (indicator lights), audible alerts (e.g., alarm sounds), tactile (e.g., vibration of the unit) or can be interfaced to an appropriate control valve for simply shutting off the supply of fluid upon the detection of emergency events, for instance. Pet. 13 (citing Ex. 1005, 10:62–67). We agree with Patent Owner that this portion of Kahn teaches on-site alerts and local control of the fluid-handling device. See Prelim. Resp. 7. This portion of Kahn does not disclose remote control.” slip op. at 18
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,294,403 - Tanklogix, LLC v. Sitepro, Inc.Institution deniedPTAB · Oct 10, 2025 · IPR2025-00651 · APJ Bart A Gerstenblith · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–3, 6, 7, and 9–20 were unpatentable over any asserted ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“presented in the petition . . . and any [preliminary] response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2024). For the reasons given below, on this record Petitioner has not established a reasonable likelihood that it would prevail in showing the unpatentability of any of the Challenged Claims. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“The parties’ proposed levels of ordinary skill in the art are similar, although Patent Owner proposes two years of experience along with a bachelor’s degree whereas Petitioner proposes “significant” experience. Patent Owner also proposes an alternative with more extensive experience in lieu of a bachelor’s degree. Although we find Petitioner’s proposed qualifications acceptable, we adopt Patent Owner’s proposed qualifications for the purposes of this Decision because they offer a wider range of qualifications that nonetheless comport with the level of ordinary skill necessary to understand and implement the teachings of the ’680 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). Our analysis and findings herein, however, do not turn on any differences in the parties’ proposed qualifications.” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“target value” is part of a command that is sent from a computing device to a server and then to a controller. The controller then receives a measurement of the fluid by a sensor and determines whether the measurement satisfies the “target value.” If the measurement does not satisfy the “target value,” further operations are undertaken. The recited operation sequence makes clear that the plain and ordinary meaning of “target value” is not as Dr. Wooley opines because the particular operating condition that a device is in at a particular time is represented by the measurement taken by the sensor, 11 Some claim language less relevant to construing “target value” was omitted for ease of reference. which the controller then uses to determine whether the measurement satisfies the “target value.” Additionally, claim 1 recites that the “target value” is sent as part of a command to the controller. The “target value” is not sent to the controller from the sensor, as might be expected if the plain and ordinary meaning of “target value” were as Dr. Wooley opines. Petitioner and Dr. Wooley’s construction would also result in “target value” meaning effectively the same thing as the measurement of the fluid by the sensor, a concept that is separately recited in claim 1 and to which the “target value” is compared. The Specification of the ’680 patent does not support Petitioner’s understanding of the plain and ordinary meaning of “target value.” Although the Specification does not recite “target value,” it recites “target state,” and describes “target state” sufficiently to understand the plain and ordinary meaning of “target” as used in “target value” and “target state.” In particular, the ’680 patent explains that “[i]n some embodiments, the process 104 includes receiving, via a network interface, from a remote user device, (e.g., via a command-center server) a command to change a state of a fluid-handling device to a target state.” Ex. 1001, 11:48–51. This portion reflects that the command is seeking to change a state of a fluid-handling device to a target state. In other words, the “target value” or “target state” is not generally “the particular operating condition that a device is in at a particular time”; rather, it is a value or state that the fluid-handling device is desired to be in, as Patent Owner and Dr. Durham explain. Additionally, just as claim 1 recites a directional component for the “target value” to be sent to the controller in a command, so too does the Specification describe a “target state” as being sent in a command from a remote user device. Thus, the Specification clearly supports the plain and ordinary meaning proposed by Patent Owner and Dr. Durham and not the plain and ordinary meaning proposed by Petitioner and Dr. Wooley. slip op. at 14
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“time-stamped process data, report exception therein to the remote host, and extract and transmit time-stamped process data to the remote host.” Ex. 1005, Abst. (emphases added). Almadi explains that its remote field systems must include a plurality of controller units “to issue commands to, and gather and process data from a plurality of field devices, including remote systems and instruments, . . . [and] a database server for the storage of process data retrieved from the remote subsystems and instruments.” Id. at 2:22–30 (emphases added). Based on these disclosures, we agree with Patent Owner that Petitioner has not established that Almadi discloses element [1.4]. Specifically, the teachings from Almadi identified by Petitioner refer to process data, which is data retrieved from the remote subsystems/field devices. Thus, we understand that Almadi’s teaching—of using an Ethernet switch to transmit “process data”—describes transmitting data from the remote subsystems/field devices. See Ex. 1005, 3:13–17, cited in Pet. 15. But claim 1 and particularly element [1.4], recites “sending, with the server, the target value to the network address [which identifies a controller of the fluid-handling device13] via the network,” which is different than sending process data from the field devices to the remote host or database server for storage.” slip op. at 19
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,175,680 - Tanklogix, LLC v. SiteproInstitution deniedPTAB · Oct 10, 2025 · IPR2025-00650 · APJ Sheila F Mcshane · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 18–32 and 34 were unpatentable over Kahn or Kahn and Gutierrez.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2024). Upon consideration of the Petition, the Preliminary Response, and the evidence of record, we determine that Petitioner has not established a reasonable likelihood of prevailing with respect to the unpatentability of at least one claim of the ’871 patent. Accordingly, for the reasons that follow, we decline to institute an inter partes review of claims 18–32 and 34 of the ’871 patent.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“The respective proposed levels of qualifications for a person of ordinary skill in the art are similar, with Patent Owner proposing two years of experience compared to Petitioner proposing significant experience with remotely controlling fluid-handling devices, like SCADA systems. Patent Owner also proposes more extensive experience in lieu of educational experience. While we find Petitioner’s proposed qualifications to be acceptable, we adopt Patent Owner’s proposed qualifications for the purposes of this Decision because they offer a wider range of qualifications that nonetheless comport with the level of skill necessary to understand and implement the teachings of the ’871 patent and the asserted prior art. Our analysis and findings herein, however, do not turn on any differences in the qualifications adopted.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We determine that we need not expressly construe any claim terms to resolve the parties’ disputes on the current record. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 10
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“actuators and the remote control of fluid handling devices, including the receipt with the user-interface module of “a user command to actuate an actuator via a presented control interface” (limitation [18.7]) and “account authorized to send commands to remotely control fluid handling devices” (limitation [18.11]). We agree with Patent Owner that the Petition fails to demonstrate that Kahn discloses or teaches these limitations because the evidence does not provide support that there is remote control of fluid handling devices or the use of a user command on a control interface to send a command to a fluid handling device, for instance. Kahn is directed to providing access to fluid sensing data and analyzing and providing visual information on that data, but we do not discern that it teaches or discloses the capability to remotely control fluid handling devices. See, e.g., Ex. 1005, code (54), 1:27–36, 2:50–3:2. More specifically, the Kahn disclosures that Petitioner repeatedly relies upon for allegedly teaching this control are deficient. See Ex. 1005, 10:62–67, 14:35– 15:2, 15:62–16:32; see also Pet. 12–14, 16–18. Kahn discloses that “the communication unit 112B can include on-site alerts such as optical (indicator lights), audible alerts (e.g., alarm sounds), tactile (e.g., vibration of the unit) or can be interfaced to an appropriate control valve for simply shutting off the supply of fluid upon the detection of emergency events, for instance.” Ex. 1005, 10:62–67. Communication unit 112B is part of the local “sensor unit,” wherein the detection conditions determined by the sensor are communicated to remote devices by communication unit 112B. See id. at 3:31–33, 5:62–6:2, 6:27–35, 7:33–37, 13:7–12, Figs. 1A–1C. Kahn discloses that the sensor units, which include communication units 112B, can be located near shut-off valves and can communicate with distant locations. See id. at 11:1–13. There are no disclosures, however, in the above passages that there is remote control of fluid handling devices, that there is a user command on a control interface that actuates an actuator, or that there is a command sent to the facility actuators via a network connection, as required in limitations [18.5]–[18.7] and [18.9]–[18.12], respectively. Rather, the disclosure indicates that the communication unit 112B includes on-site alerts and that the local (non-remote) communication unit 112B can be interfaced with the control valve.” slip op. at 18
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,488,871 - PTAB · Oct 10, 2025 · IPR2025-00728 · APJ Timothy G Majors · IPR · Institution
The Board instituted IPR on all challenged claims and all five grounds, finding a reasonable likelihood of success based on at least one claim, including claim 1 over Hartley and Eller.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless it is determined that there is a reasonable likelihood that the petitioner will prevail with respect to at least one of the claims challenged in the petition. For reasons explained below, we conclude that Petitioner shows a reasonable likelihood that it will prevail with respect to at least one of the ’921 patent’s challenged claims.1 We institute inter partes review on all challenged claims. See SAS Inst. Inc. v. Iancu, 584 U.S. 357, 362–63 (2018); 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”). Findings and conclusions at this stage are preliminary and based on the current record. Any final decision will be based on a full trial record.” slip op. at 2
- Skill levelSkill level patent owner adoptedDecided for patent owner
“We agree with Patent Owner that Petitioner’s proposed POSA definition lacks specificity. That definition, if interpreted generically, could mean that a person may qualify as a POSA if they had, for example, a B.S. in mechanical engineering and only two years of experience designing or engineering any type of product in any field. That is too broad. We find that a POSA would have had the agreed-upon educational credentials—an undergraduate degree in mechanical engineering or a related engineering discipline. Ex. 1003 ¶ 35; Ex. 2024 ¶ 61. We find that a POSA would also have had 2–4 years of design or engineering experience related to products in the field of the invention, such devices. Ex. 1001, 1:16–54 (background of the invention). Such devices include, but are not necessarily limited to, hemostasis valves and catheters for minimally-invasive vascular surgeries. Id. And, consistent with the testimony of the parties’ experts, the POSA need not have had firsthand experience designing hemostasis valves. See, e.g., Ex. 1037 (Zalesky Tr.), 72:11–73:7 (testifying direct experience “designing” hemostasis valves or aspiration catheters is not necessary, but “general experience with vascular devices and procedures” is required); Ex. 2030 (Thornton Tr.), 180:13–19. Further, as Dr. Zalesky testified, the POSA’s experience related to developing such devices “could be as simple as bench testing and looking at clinical data.” Ex. 1037, 74:5–75:1. Lastly, a POSA would have had an understanding of such devices’ design requirements as determined by the needs of the physician, patient, and procedure, which understanding may be informed by work experience and/or study. Ex. 2030, 24:5–21.” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“That does not, however, address the dispute about “flexibility.” On that issue, the argument and evidence at this stage tends to favor Patent Owner’s position that a “filament” as claimed is flexible. which include claim 1’s recitation of an “active tensioning mechanism” comprising the filament and the Specification’s description of a filament that can be both “loosened” and “tightened.” Prelim. Resp. 14–16 (citing, e.g., Ex. 1001, 9:36–37, 9:53–56 (teaching “the filament 150 is tightened” when the actuator buttons are released and “the filament 150 is loosened” when the buttons are pressed to open the valve)); see also Ex. 2025, 1288 (defining “tension” as to “tighten to a desired or appropriate degree”). These descriptions from the patent appear at this stage more consistent with the view that the filament is characteristically flexible, not rigid. So too, as we explained in related matters, the ’921 patent’s loop embodiments (where the filament forms one or more loops like depicted and described in Figures 6–7) require a flexible structure. See, e.g., Ex. 2032, 15–16 (explaining that the device would not work to constrict the tubular sidewall and lumen (analogous to the elongate member defining a lumen of the claims here) if the filament forming the loop(s) was inflexible); Ex. 1001, Figs. 6–7 (filament 150, with sub-filaments 150-A and 150-B). Although flexibility of the filament in the patent’s “bight” embodiments (e.g., as shown in Figures 8 and 9) is not manifestly clear, there is a dearth of evidence from Petitioner—either intrinsic or extrinsic to the patent— showing why a POSA would have understood the bights as embracing rigid structures. See Ex. 1001, Figs. 8–9 (similar to the loop embodiments, depicting structures 150-A and 150-B forming sub-filaments of the bight(s)). Moreover, as admitted by Petitioner’s expert, that a filament may be made from various materials described in the patent (e.g., synthetics or metals) does not, absent more information, lead to a conclusion that a filament is “rigid.” Ex. 2030, 125:2–126:4 (testifying “the relative stiffness or rigidity” slip op. at 14
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“Based on the current record, we are unpersuaded that Schaffer describes a valve with a filament as claimed. If, as construed above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes such a feature in its valves. Instead we agree with Patent Owner that Petitioner “implicitly admits” that Schaffer’s actuating members are rigid insofar as Petitioner argues those members would form gaps for fluid leakage around tools inserted through the central lumen when in use and compared to the use of a flexible string or wire (of Hartley or Eller). Prelim. Resp. 29 (citing Pet. 36). Moreover, we find Dr. Zalesky’s interpretation of Schaffer more plausible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2024 ¶¶ 92–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed. Cir. 2002) (explaining that the “test for novelty” requires “strict identity”); Jamesbury Corp. v. Litton Indus. Prods., Inc., 756 F.2d 1556, 1560 (Fed. Cir. 1985) (holding “anticipation is not shown by a prior art disclosure which is only ‘substantially the same’ as the claimed invention”), overruled on other grounds, A.C. Aukerman Co. v. R.L. Chaides Constr. Co., 960 F.2d 1020 (Fed. Cir. 1992) (en banc). Because we determine on this preliminary record that Schaffer does not describe a valve comprising a “filament” as claimed, Schaffer cannot anticipate the challenged claims.” slip op. at 26
Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,844,921
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.