- Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.No claims unpatentablePTAB · Jul 10, 2026 · IPR2025-00147 · APJ Linda E Horner · IPR · Final written decision
The Board found claims 1–6 and 8–20 not shown unpatentable under three obviousness grounds, principally because the proposed combinations did not establish a feasible curved battery or transparent potting encapsulating the components.
RulingsFinal written decision- Skill levelSkill level board ownOther
“at least a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, or equivalent experience, and at least two years’ experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors. Pet. 8 (citing Ex. 1002 ¶ 29). Petitioner also contends that a person of ordinary skill would have been “familiar with, e.g., sensor system design, including inertial and other motion sensor system design, and signal processing” and that “[a] higher level of education or skill might make up for less experience, and vice versa.” Id. Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. Resp. 25. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’124 patent and the references cited in the Petition.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We need not reach the issue of whether the preamble is limiting for purposes of determining patentability of the challenged claims. Even were we to agree with Patent Owner that the preamble is limiting and the claims are limited to a finger-worn ring wearable computer device, Petitioner has relied on Schröder in each ground to disclose a “wearable computing device configured to be worn around a finger of a wearer.” Pet. 22 (Ground 1), 45 (Ground 2, relying on Yuen for adding the functionality of light sources with a photodetector, temperature sensors, and varying the sampling frequency of sensor data acquisition), 56 (Ground 3). We agree with Petitioner that Schröder discloses such a device. Thus, no explicit claim construction is necessary for this decision.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successReasonable expectation not foundNot shown unpatentableNot shown unpatentable
“We are not persuaded by Petitioner’s arguments and find that Patent Owner has the better position for several reasons. First, the record supports Patent Owner’s argument that Mestas’s batteries are much too large to fit within a ring form factor, and “would have to be reduced in size on the 6 There is no Exhibit 2022 in the record of this case. magnitude of 5-10x from its current size to fit in a ring of Schröder.” Resp. 38 (citing Dr. Anthony’s cross-examination testimony at Ex. 2021, 313:12). Second, Petitioner relies on evidence in the Reply that Petitioner failed to specifically identify in the Petition. Compare Reply 3–5 (citing Ex. 1369 ¶¶ 7–14; Ex. 1079 ¶¶ 47, 71; Ex. 2022, 138:7–143:1; Ex. 1002 ¶¶ 96, 337; Ex. 2021, 12–13, 307:7–17; Ex. 2020, 212:6–214:13; Ex. 1081, 130:18–131:14; Ex. 1010 ¶ 168), 9 (referring back to Section § II.B.2) with Pet. 25–26 (citing Ex. 1002 ¶¶ 193–99; Ex. 1010 ¶¶ 157, 163, 168, 201, Fig. 6). More specifically, while the portion of Dr. Anthony’s Declaration cited in the Petition (see Pet. 25–26 (citing Ex. 1002 ¶¶ 193–99)) mentions the Technology Background Section V of his Declaration (Ex. 1002 ¶¶ 42–147), neither Petitioner nor Dr. Anthony sufficiently explains what evidence supports his opinion that it was feasible to incorporate batteries or battery-like devices into finger-rings, or how a person of ordinary skill in the art would have miniaturized a curved battery for incorporation into Schröder’s ring. Ex. 1002 ¶ 196 (describing that rechargeable batteries powering wearable electronic devices were “well-known by 2013” and “had also undergone significant advances in terms of miniaturization and energy density [that] made it feasible to incorporate batteries or battery-like devices such as supercapacitors into smaller form factors, such as finger rings, without sacrificing functionality” such as “lithium-polymer (Li-Po) batteries and solid-state batteries.”). Moreover, some of Petitioner’s citations in the Reply appear to be incorrect as there is no Exhibit 2022 of record in this case, as noted above. These issues undermine the strength of Petitioner’s showing by making it difficult to follow its reasoning, much less identify where in the record that reasoning finds support. See DeSilva v. DiLeonardi, 181 F.3d 865, 866–67 (7th Cir. 1999) (“A brief must make all arguments accessible to the judges, rather than ask them to play archaeologist with the record.”); United States v. Dunkel, 927 F.2d 955, 956 (7th Cir. 1991) (“Judges are not like pigs, hunting for truffles buried in briefs.”). Third, even considering Petitioner’s new Reply arguments and” slip op. at 27
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“We credit Dr. Mercier’s testimony over Dr. Anthony’s and agree that Dr. Anthony’s testimony fails to account for the constraints of a substantially smaller form factor in Schröder’s finger-ring as compared to Mestas’s wrist device. Ex. 2018 ¶ 140. Although large curved batteries suitable for use in a wrist band or other larger wearable device, such as shown in Mestas, were known at the time of the ’124 patent, we also have evidence that prior art “finger ring wearables up to the ’124 patent had used ‘coin’ type batteries.” Resp. 40 (citing Ex. 2018 ¶ 140). We credit Dr. Mercier’s testimony that a person having ordinary skill in the art would have looked to a coin type battery for the necessary power requirements of Schröder’s device. Ex. 2018 ¶ 141. Indeed, this testimony is consistent with the other art of record that consistently shows the use of flat batteries in finger-ring devices, often stacked above and protruding from the general ring shape of the device. See, e.g., Ex. 1005 (Niwa), Figs. 22, 28; Ex. 2025 (Asada ’701 patent), Fig. 4; Ex. 1035 (Rhee), Figs. 7-1, 8-1, 8-2; Ex. 1037 (Asada article), Fig. 9; Ex. 1034 (Asada ’199 patent), Fig. 2; Ex. 1028 (Kimura patent), Fig. 24; Ex. 2018 ¶¶ 74–84. In fact, Oura’s first-generation ring design, released in 2015, used a Superbowl ring type design, with the battery and other components mounted on top of the ring. Ex. 2034; Ex. 2018 ¶ 85. We also agree with Dr. Mercier that Dr. Anthony’s testimony lacks evidence or a technical analysis of the power requirements for the various sensors he suggests including in a wearable device and the capacity of the proposed GMBPow battery. See, e.g., Ex. 1002 ¶¶ 94, 210, 214–17; Ex. 2018 ¶ 97. Moreover, Dr. Anthony does not address the issues with the batteries that are identified in the references he discusses. For example, Dr. Anthony does not address Lee’s disclosure that “direct coating of electrode slurry onto plain paper led to the occasional internal-shorting of the device due to the leakage of the electrode material through a large-sized hole in the paper.” Ex. 1019, 2415. In contrast, Dr. Mercier discusses the pitfalls the skilled artisan faced in developing finger-ring devices. See, e.g., Ex. 2018 ¶¶ 77–79 (discussing the issues Rhee’s and Asada’s large rings), 83 (identifying power requirements as a design constraint). For example, Dr. Mercier explains that “flexible or curved batteries include flexible packaging materials such as aluminum laminated films that house the electrodes and electrolyte” such that “once the battery packaging is added to a battery such as GMBPow and then placed within a housing (e.g., external housing shell and internal potting), the resulting device would have dimensions that are not suitable for a finger-worn ring.” Id. ¶ 96 (citing Ex. 2026).” slip op. at 34
Patent outcomesUS 11,188,124 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,188,124 - Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentablePTAB · Jul 6, 2026 · IPR2025-00191 · APJ Michael T Cygan · IPR · Final written decision
Claims 3, 8, 11, 12, and 19 are unpatentable under §103; Petitioner did not show claims 6, 9, 10, 13–18, and 20 unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“at the critical time “would have had a Bachelor of Science degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶¶34–38). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. Patent Owner does 5 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 100; PO. Resp. circuit design. PO Resp. 9–10 (citing Ex. 2021 ¶ 35). Neither Patent Owner nor Dr. Campbell considers the obviousness of the claims to turn on the precise definition of the level or ordinary skill in the art. PO Resp. 10; Ex. 2021 ¶ 35. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’322 patent and the prior art of record.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“C. Claim Construction Neither party proposes any express claim construction. Pet. 27 (stating claims should receive their “plain and ordinary meaning”); PO Resp. 10 (stating that Petitioner’s challenges fail “under any reasonable construction”). In an inter partes review, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, the words of a claim generally are given their “ordinary and customary meaning,” which is the meaning the term would have to a person of ordinary skill at the time of the invention, in the context of the entire patent including the specification. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). We determine no terms require express construction for purposes of this Decision.” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“We determine that such a configuration would be neither inoperable nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15
- Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed
“nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15
Patent outcomesUS 11,581,322 mixedClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,581,322 - Kubota North America Corporation v. Vermeer Manufacturing CompanySome claims unpatentablePTAB · Jun 30, 2026 · IPR2025-00169 · APJ Meredith C Petravick · IPR · Final written decision
Claims 50–54 are unpatentable as obvious over KR996 and JP705; claims 55–63, 68, 69, and 80–85 were not shown unpatentable over KR996, JP705, Bares, and Beltrami.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“(“This language is merely exemplary, using reference numerals to refer to the embodiment’s features and qualifying ‘single weldment’ as referring ‘generally’ to specific embodiments.”). The Iowa District Court reached the same conclusion. See Ex. 1020 at 4 (holding that “‘mainframe’ will be given its plain and ordinary meaning and does not require a single weldment” (emphasis added)), cited at Pet. Init. CC Br. 2; see also 37 C.F.R. § 42.100(b) (“Any prior claim construction determination concerning a term of the claim in a civil action, or a proceeding before the International Trade Commission, that is timely made of record in the inter partes review proceeding will be considered.”).” slip op. at 35
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“probative and cogent evidence in the record” and “may often establish that an invention appearing to have been obvious in light of the prior art was not.” Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Thus, notwithstanding what the teachings of the prior art would have suggested to one skilled in the art, secondary considerations (objective evidence of non-obviousness) may lead to a conclusion that the challenged claims would not have been obvious. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984). Our obviousness analysis includes consideration and weighing of Patent Owner’s objective indicia of non-obviousness.” slip op. at 57
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed
“e) Conclusion as to the Independent Claim 50 For the reasons discussed above, the evidence presented by Petitioner” slip op. at 67
- ExcludeMotion to exclude, grantedGranted in part
“For these reasons, we are persuaded by Petitioner to exclude, as” slip op. at 19
Patent outcomesUS 9,321,386 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,321,386 - Kubota North America Corporation v. Vermeer Manufacturing CompanySome claims unpatentablePTAB · Jun 30, 2026 · IPR2025-00170 · APJ Eric C Jeschke · IPR · Final written decision
Claims 1–18 are unpatentable over KR996 and the KR996/Bares combination; Petitioner did not prove claims 19–36 unpatentable over KR996, Bares, and Beltrami.
RulingsFinal written decision- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed
“(10) Conclusion as to Objective Indicia We have considered, as a whole, all of Patent Owner’s arguments and admissible evidence concerning secondary considerations. If we were to presume nexus, we give some weight to Patent Owner’s admissible evidence of industry praise and skepticism at the time of invention. d. Conclusion as to Claim 1 For the reasons discussed above (§§ II.F.2.a–b), the evidence” slip op. at 62
- Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia outweighedDecided for petitioner
“probative and cogent evidence in the record” and “may often establish that an invention appearing to have been obvious in light of the prior art was not.” Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Thus, notwithstanding what the teachings of the prior art would have suggested to one skilled in the art, secondary considerations (objective evidence of non-obviousness) may lead to a conclusion that the challenged claims would not have been obvious. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984). Our obviousness” slip op. at 52
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“lexicographical, we agree with the parties that “mainframe” is not limited to a single weldment. Pet. Init. CC Br. 1; PO Init. CC Br. 1–2. Instead, a single-weldment “mainframe” is merely one disclosed embodiment. See Pet. Init. CC Br. 3 (stating that “by including the term ‘generally’ in a statement, the feature (i.e., single weldment) is expressly identified as merely included in some, but not all embodiments”); PO Init. CC Br. 3 (“This language is merely exemplary, using reference numerals to refer to the embodiment’s features and qualifying ‘single weldment’ as referring ‘generally’ to specific embodiments.”). The Iowa District Court reached the same conclusion. See Ex. 1020 at 4 (holding that “‘mainframe’ will be given its plain and ordinary meaning and does not require a single weldment” (emphasis added)), cited at Pet. Init. CC Br. 2; see also 37 C.F.R. § 42.100(b) (“Any prior claim construction determination concerning a term of the claim in a civil action, or a proceeding before the International Trade Commission, that is timely made of record in the inter partes review proceeding will be considered.”). Turning to the prosecution history, neither Petitioner nor Patent Owner has highlighted any specific statements that impact the scope of the term “mainframe.” And from our independent review, we do not discern any such statements. For these reasons, the intrinsic evidence as a whole supports construing “mainframe” as a primary supporting structure.” slip op. at 33
- ExcludeMotion to exclude, grantedMotion to exclude, deniedMixed
“2. Analysis “The moving party has the burden of proof to establish that it is entitled to the requested relief.” 37 C.F.R. § 42.20. a. Exhibits 1005, 1006, and 1014 Exhibit 1005 is an English language translation of Korean Patent No. 10-1041996. Exhibit 1006 is an English language translation of Japanese document JP2004-17705A. Exhibit 1014 is an English language translation of Korean Patent No. 10-1023528. A Certification of Translation signed by Takashi Maeshiro of HC Language Solutions, Inc., accompanies each of Exhibits 1005, 1006, and 1014. Ex. 1005 at 28; Ex. 1006 at 16; Ex. 1014 at 16. Each Certification of Translation is worded substantially the same except for the references to the document at issue and the source language being either Korean or Japanese. Exhibit 1005’s Certification of Translation, for example, states: I, Takashi Maeshiro, on behalf of HC Language Solutions, Inc., do solemnly and sincerely declare, to the best of my knowledge and belief, that the attached text represents a translation of Korean Patent No. 10-1041996, that the translation was performed by HC Language Solutions, Inc., and that the translation represents a true, correct, and faithful translation from Korean to English in a form that reflects the intention and meaning of the original text. I hereby declare that all statements made herein of my own knowledge are true and that all statements made on information and belief are believed to be true; and further that these statements were made with the knowledge that willful false statements and the like so made are punishable by fine or imprisonment, or both, under Section 1001 of Title 18 of the United States Code. Ex. 1005 at 28 (emphasis added). Patent Owner argues that the Certifications of Translation do not” slip op. at 18
Patent outcomesUS 9,975,750 mixedClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 9,975,750 - Resmed Corp. v. Cleveland Medical Devices, Inc.No claims unpatentablePTAB · Jun 29, 2026 · IPR2025-00247 · APJ Cynthia M Hardman · IPR · Final written decision
Claims 1–19 were not shown unpatentable under any of six obviousness grounds because Truitt did not teach or suggest the claimed severity calculation and index, and the Mumford combinations lacked the required sensor disclosures.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“Patent Owner filed an authorized Motion to Terminate, alleging that Petitioner failed to name its corporate parent, Resmed Inc., as a real party in interest. Paper 29. Petitioner filed an opposition. Paper 31. Patent Owner filed a reply. Paper 32. We denied the Motion to Terminate. Paper 40.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“disorder symptoms” require a “quantitative” calculation or use of an algorithm, we also disagree. See PO Resp. 14–16. First, nothing in the language of the claims themselves describes or requires a “quantitative” calculation or an algorithm. See generally Ex. 1001, 23:6–26:59. To be sure, the ’029 patent discloses embodiments that use known algorithms to “quantify the level of severity of the subject’s sleeping disorder or symptoms.” See, e.g., id. at 20:16–19. But the Specification does not require an algorithm. The Specification also indicates that quantification is merely “preferable” (i.e., not required), and is merely one embodiment. See, e.g., id. at 19:8–12 (“The signals from the one or more sensors used in various embodiments of the present invention are preferably analyzed using a processor and software that can quantitatively estimate or determine the severity of the subject’s sleeping disorder or symptoms.”) (emphasis added), 4:51–59 (“Finally, in still another embodiment, the present invention includes a sleeping disorder treatment system comprising a device for diagnosing and creating a quantitative output of a level of severity of a subject’s sleeping disorder or symptoms . . . .”) (emphasis added); see also Reply 5–6 (citing Ex. 1001, 4:3–59 and 19:8–12 and stating that the ’029 patent lists “numerous embodiments where only one of seven include a quantitative assessment”). Elsewhere, the Specification more generally states that signals from sensors are “analyzed to determine the level of severity of the symptoms,” without specifying that such analysis must be “quantitative” or performed by an algorithm. See Ex. 1001, 3:41–44. In view of these disclosures, Patent Owner does not persuade us to adopt its narrowing claim construction. Indeed, our reviewing court has “repeatedly warned against confining the claims” to specific embodiments disclosed in the Specification. Phillips, 415 F.3d at 1323. Patent Owner’s reliance on a prior Board decision in PGR2024- 00012, which related to the parent of the ’029 patent, is unavailing. See PO Resp. 15–16. We agree with Petitioner that in the cited case, “[t]he Board made no findings about the meaning of the term calculating ‘the data of a severity of the sleep disorder symptoms of the subject’ for claim construction.” Reply 8. Indeed, neither party offered any claim construction, and the Board determined that no claim construction was necessary for purposes of that decision. See ResMed Corp., PGR2024- 00012, Paper 7 at 8. The page of the decision Patent Owner cites addresses written description support in the specification for the claims challenged in that PGR, not claim construction. See id. at 16. In any event, the cited decision is a decision on institution. The Board’s statements there are, by nature, preliminary findings and conclusions based on a preliminary record, and are not binding here. For at least the above reasons, Patent Owner does not persuade us to adopt its narrowing claim construction and we find that the term “data of a severity” does not need construction because the words of the term are clear on their face.” slip op. at 31
- Strike new argumentNew argument disregardedDecided for patent owner
“skilled artisan would have incorporated only portions of Mumford’s algorithm into Truitt’s PAP (i.e., only those portions related to “the detection of sleep disordered events” and not the portions of the algorithm related to “determin[ing] sleep stage”) comes too late because this argument was not in the Petition. See, e.g., Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286–87 (Fed. Cir. 2017) (rejecting petitioner’s “attempts to cure the petition’s deficiencies in its subsequent briefing to the Board”). The Petition does not discuss modifying Mumford’s sleep efficacy algorithm before incorporating it into Truitt’s PAP device or incorporating only certain features of the algorithm. Indeed, the Petition and Dr. Kirkness rely on Mumford’s ability to detect sleep arousals when mapping Mumford to the claimed “data of a severity” and “index.” See Pet. 69–70; Ex. 1003 (Kirkness Decl.) ¶¶ 323–325. Mumford discloses that the mask electrodes detect arousals. See Ex. 1009 (Mumford) 2:4–10, 11:39–48. The same lack of disclosure plagues Petitioner’s belated Reply argument that Truitt’s ports 74 and 76 can incorporate electric sensing elements that would have functioned similar to Mumford’s electrodes. See Reply 22. The Petition did not mention ports 74 and 76 or otherwise suggest that a skilled artisan would have added functionality similar to Mumford’s electrodes to Truitt’s PAP, and we find that it is too late on Reply for Petitioner to posit this modification.” slip op. at 40
- Expert testimonyPetitioner expert creditedPatent owner expert creditedMixed
“significant than the intrinsic record in determining ‘the legally operative meaning of claim language.’” Phillips v. AWH Corp., 415 F.3d 1303, 1317 (Fed. Cir. 2005). This is especially applicable to Dr. Jafari’s opinions. His declaration was not prepared for this proceeding and thus Dr. Jafari was not subject to cross examination in this proceeding. See Reply 6 n.3. Moreover, Dr. Jafari was not opining on claim construction; rather, he was addressing the alleged indefiniteness. See Ex. 2020 (Jafari Decl.) 12 (heading addressing definiteness), ¶¶ 41–42, 46. Additionally, paragraphs 41–42 of Dr. Jafari’s declaration discuss claim terms phrases in a different patent (US 11,375,921), which explicitly include the terms “quantified” and “quantitative.” See Reply 6–7; Ex. 2020 (Jafari Decl.) ¶ 34. For at least these reasons, Patent Owner has not persuaded us that Dr. Jafari’s testimony is applicable here. Further, regarding the portion of Patent Owner’s proposed construction reciting “the degree of deviation from the baseline characteristics of a patient without sleep disorder symptoms,” Dr. Borkholder does not do his own analysis, but instead simply states that he “agree[s] with the litigation claim construction opinions of Dr. Jafari.” Ex. 2019 (Borkholder Decl.) ¶ 53. This is insufficient, and thus we do not credit Dr. Borkholder’s testimony regarding claim construction. We instead credit Dr. Kirkness’s statement that “[s]everity data is frequently calculated as the deviation from baseline characteristics of the patient himself, not a generic person ‘without sleep disorder symptoms.’” Ex. 1071 (Kirkness Reply Decl.) ¶ 13; Reply 9. As Dr. Kirkness explains, and Patent Owner does not dispute (see generally Sur-reply), “[t]he ‘baseline characteristics of a [generic] patient without sleep disorder symptoms’ would be irrelevant to any particular patient with their own unique breathing patterns and sleep disorder symptoms.” Ex. 1071 (Kirkness Reply Decl.) ¶ 13 (second alteration in original). For at least these reasons, we reject Patent Owner’s proposed claim construction.” slip op. at 30
Patent outcomesUS 11,872,029 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,872,029 - Imperative Care, Inc. v. Inari Medical, Inc.All claims unpatentablePTAB · Jun 9, 2026 · IPR2025-00289 · APJ Timothy G Majors · IPR · Final written decision
Claims 1–15 are unpatentable: claims 1–15 under Grounds 2 and 3, and claim 10 under Ground 4; Ground 1 did not establish unpatentability.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“We have construed the “filament” term in multiple related proceedings and agreed with Patent Owner that the claimed filament requires flexibility. See Ex. 1050 (Final Written Decision in 156 IPR); IPR2024-01157, Paper 35 (Final Written Decision) at 15–24. Specifically, we determined that the evidence supports Patent Owner’s position that “a POSA would have understood the plain and ordinary meaning of the claimed ‘filament’ as a flexible length of material (e.g., one or more string(s), wire(s), tape(s)).” See, e.g., Ex. 1050, 23. We maintain that construction in this Decision for the reasons given by Patent Owner (see PO Resp. 24–32; PO Sur-reply 6–8), we disagree with Petitioner’s argument to the contrary (Pet. Reply 27–31), and we incorporate our analysis concerning the meaning of the filament term from the related proceedings identified above, which applies equally here.13 Ex. 1050 (Final Written Decision in 156 IPR); IPR2024-01157, Paper 35 (Final Written Decision) at 15–24. The parties agreed at the oral hearing that there is no additional argument or evidence 13 Although the ’005 patent is not directly related to the patents at issue in the 1157 and 156 IPRs, the ’519 Application that the ’005 patent purports to incorporate for providing all relevant disclosures about the filament term is a parent application to the challenged patents in the 1157 and 156 IPRs (see supra n.3). SightSound Techs., LLC v. Apple Inc., 809 F.3d 1307, 1316 (Fed. Cir. 2015) (“Where multiple patents derive from the same parent application and share many common terms, we must interpret the claims consistently across all asserted patents.”) (internal quotation marks omitted). We also construed the filament term consistently in other ongoing proceedings on related patents. See, e.g., Ex. 1045 (Institution Decision in the 728 IPR), 12–18; Ex. 1046 (Institution Decision in the 989 IPR), 13–21. already addressed in those related matters. Tr. 6:13–23, 23:19–26.” slip op. at 16
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that the person of ordinary skill in the art (“POSA”) in August 2018 “would have had an undergraduate degree in mechanical engineering or a related engineering discipline and 2–4 years of catheter design experience.” Pet. 17 (citing Ex. 1003 ¶ 35). Although Patent Owner states that it “disagrees” with Petitioner’s POSA definition, Patent Owner nevertheless applies that definition in this case. PO Resp. 32–33; see Tr. 22:23–23:5 (Patent Owner is “not disputing” Petitioner’s definition, asserting the definition “doesn’t make any difference in this case”).” slip op. at 13
- Expert testimonyPatent owner expert creditedPetitioner expert creditedMixed
“We credit Dr. Zalesky’s interpretation of Schaffer on whether the POSA would have understood Schaffer as describing rigid actuating members. Dr. Zalesky testifies, for example, that a POSA would have understood from Schaffer’s disclosures about the actuating members being “machined” from metal or plastic, that such actuating members would be rigid. Ex. 2026 ¶ 101 (explaining “machining is a manufacturing process in which the desired part . . . is created using the controlled removal of bulk material” to produce a “rigid material”); Ex. 1005 ¶ 82 (“The actuating member 55 and the actuating button 261 is machined from aluminum” and “[i]n another example, the actuating member 55 and the actuating button 261 are machined from plastic”); Ex. 2026 ¶¶ 102–103 (testifying the disclosed valve assembly technique in Schaffer (Ex. 1005 ¶ 83) also indicates that “rigid” actuating members are used). Mr. Thornton opines (without citation to any persuasive supporting disclosure) that a POSA “would have understood that Schaffer’s U-shaped actuating members would have preferably been formed from a thin, flexible material.” Ex. 1003 ¶ 113. But, at deposition, Mr. Thornton conceded that machined plastics and aluminum, like disclosed in Schaffer, are rigid. Ex. 2005, 168:2–6 (“Q. And you said that plastic that would be machined would be rigid, correct? A. I think that’s a fair statement.”). Although Mr. Thornton opines that Schaffer’s actuating members would “preferably”” slip op. at 29
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableUnpatentableMixed
“For the reasons above, Petitioner has not established that the claimed “filament” is disclosed in the combination of Garrison and Schaffer and, thus, Petitioner has not shown by a preponderance of the evidence that claim 1 would have been obvious over Garrison and Schaffer. Petitioner’s challenge to independent claim 10 (and the claims that depend from claim 1 and claim 10) fails for similar reasons. Each of the challenged claims requires a “filament” and, given our construction of that term and our findings above that Schaffer does not teach or suggest the claimed filament, Petitioner has not proved by a preponderance of the” slip op. at 31
Patent outcomesUS 11,554,005 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,554,005 - Whoop, Inc. v. Omni Medsci, Inc.InstitutedPTAB · May 6, 2026 · PGR2026-00003 · APJ John A Squires · PGR · Director review
The Director instituted post-grant review of claim 7 of the ’790 patent under 35 U.S.C. § 324(a).
RulingsDirector review decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“In this proceeding, Petitioner persuasively shows, on the current record, that the ’790 patent is an AIA patent. As Petitioner notes, during prosecution of the ’790 patent, Patent Owner certified that the ’790 patent application “contains, or contained at any time, a claim to a claimed invention that has an effective filing date on or after March 16, 2013.” Ex. 1002, 246; see Pet. 11–12. Patent Owner, therefore, acknowledged that the application was to be examined under the first inventor to file provisions of the AIA. Id. Also, Petitioner shows, for purposes of institution, that the provisional applications to which the ’790 patent claims priority do not provide written description support for a “wearable device adapted to be placed on a wrist or a hand dorsal of a user,” such that the detection system of the wearable device has a “plurality of detectors arranged along an arc,” as recited in claim 2. Pet. 13.1 Although Patent Owner asserts that one of the provisional applications provides written description support via a figure illustrating a mouth guard design and a disclosure that “[t]he non-invasive devices may be part of a series of biosensors applied to the patient,” I do not find this persuasive based on the current record. See Paper 6, 16–17 (citing Ex. 1071, 15–16, 29, 40); Ex. 1071, 7, 29, 40. Even if the mouth guard could be considered to have detectors arranged in an arc, the mouth guard is used to “perform a non-invasive measurement for dental caries” and is not described as “adapted to be placed on a wrist or a hand dorsal of a user,” as claim 2 requires. See Ex. 1071, 7, 29, 18–19, 40.” slip op. at 3
- Disclosure Requirements (§112) › Written description (Ariad)Decided for petitioner
“record, that the ’790 patent is an AIA patent. As Petitioner notes, during prosecution of the ’790 patent, Patent Owner certified that the ’790 patent application “contains, or contained at any time, a claim to a claimed invention that has an effective filing date on or after March 16, 2013.” Ex. 1002, 246; see Pet. 11–12. Patent Owner, therefore, acknowledged that the application was to be examined under the first inventor to file provisions of the AIA. Id. Also, Petitioner shows, for purposes of institution, that the provisional applications to which the ’790 patent claims priority do not provide written description support for a “wearable device adapted to be placed on a wrist or a hand dorsal of a user,” such that the detection system of the wearable device has a “plurality of detectors arranged along an arc,” as recited in claim 2. Pet. 13.1 Although Patent Owner asserts that one of the provisional applications provides written description support via a figure illustrating a mouth guard design and a disclosure that “[t]he non-invasive devices may be part of a series of biosensors applied to the patient,” I do not find this persuasive based on the current record. See Paper 6, 16–17 (citing Ex. 1071, 15–16, 29, 40); Ex. 1071, 7, 29, 40. Even if the mouth guard could be considered to have detectors arranged in an arc, the mouth guard is used to “perform a non-invasive measurement for dental caries” and is not described as “adapted to be placed on a wrist or a hand dorsal of a user,” as claim 2 requires. See Ex. 1071, 7, 29, 18–19, 40.” slip op. at 3
§ 112 disclosurePatents in suitUS 12,193,790 - Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Some claims unpatentablePTAB · Apr 29, 2026 · IPR2024-01493 · APJ John D Hamann · IPR · Final written decision
Claims 1, 3, 5, 7–11, 14, and 15 are unpatentable as obvious; claims 2, 4, 6, 12, and 13 were not shown unpatentable because the references did not establish entirely crystallized CoFeB layers.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In our Decision on Institution, we adopted the definition Petitioner proposes for one having ordinary skill in the art at the time of the invention of the ’167 patent. Dec. on Inst. 6. Namely, we found that one of ordinary skill in the art would have had “a Ph.D. in electrical engineering, physics, materials science, or a related field, and at least one year of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” or “a Master’s degree in electrical engineering, physics, materials science, or a related field, and four years of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent.” Id. (citing Pet. 20 (citing Ex. 1024 ¶ 25)). We also found that “[l]ess work experience may be compensated by a higher level of relevant education, and vice versa.” Id. Patent Owner does not address Petitioner’s definition, nor provide its own. See generally PO Resp. Because Petitioner’s definition of the level of skill in the art is consistent with the ’167 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC, 57 F.3d at 1579; In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“Here, neither party sets forth any term for claim construction. Pet. 17; see generally PO Resp. Thus, for purposes of this Decision, we afford the claim terms their plain and ordinary meaning. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’”)).” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“In addition, we agree with Petitioner and find that one of ordinary skill in the art “would have been motivated to replace either or both of Bowen’s electrodes with CoFeB to increase TMR and lower Hf [(coupling field)] and Hc [(coercivity)].” Pet. 24, 27; Ex. 1055,30 2270 (“[I]t is natural to replace both the free and pinned layers to CoFeB to further increase the TMR value.”); Ex. 105631 ¶¶ 67–68 (“[B]oth the ferromagnetic layers 5, 7 are made of an FeCoB”32 for “improvement of the TMR ratio.”); Ex. 1024 ¶¶ 129, 132. We credit Dr. Bokor’s cited testimony as it is consistent with the cited evidence. Moreover, as Petitioner explains, “[r]esearchers were . . . interested in optimizing MTJs to improve MRAM performance,” and “[h]igher TMRs long promised improved performance for MRAM.” Pet. 6 30 Dexin Wang et al., 70% TMR at room temperature for SDT sandwich junctions with CoFeB as free and reference layers, 40 IEEE Trans. Magn. 2269–71 (July 2004). 31 US 2004/0136232 A1, published July 15, 2004, to Hosomi. 32 We find persuasive Dr. Bokor’s testimony that “a skilled artisan [would have] understood that CoFeB and FeCoB refer to the same alloy.” Ex. 1024 ¶ 121. 36–44) (emphasis omitted). In addition, we agree with Petitioner that one of ordinary skill in the art “would have found it obvious to use Parkin’s CoFeB layer in place of Bowen’s electrodes to increase TMR” in light of Parkin’s explicit teachings. Pet. 27; Ex. 1024 ¶ 133. In particular, Parkin explicitly teaches that “very high TMR values are unexpectedly found for MTJs with highly textured (100) MgO tunnel barriers but with nominally amorphous storage layers.” Ex. 1062, 18:49–51. Notably, Parkin provides that “[t]he TMR of the device of F[igure] 3A is nearly two times higher than the highest TMR ever reported in prior art devices using conventional alumina tunnel barriers.” Id. at 18:63–65; Pet. 27. And as we discuss above, Parkin teaches that Figure 3A’s MTJ may be inverted, such that the storage layer is formed beneath the tunnel barrier. Ex. 1062, 17:7–10. In addition, we agree that one of ordinary skill in the art would have had a reasonable expectation of success in modifying Bowen in the manner Petitioner proposes, as forming electrodes with CoFeB alloys was known. Pet. 28. As Petitioner argues, “forming electrodes with CoFeB alloys in MTJs was known and had been successfully done,” and thus we are persuaded that “one of skill would have found it to be a straightforward, predictable, and desirable improvement to TMR, Hf, and Hc in Bowen’s” slip op. at 21
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“We find unavailing Patent Owner’s arguments that Bowen teaches a “radically different manufacturing process[] from the claimed invention,” and that Bowen “went to heroic lengths to provide a crystalline (001) bottom electrode that provides a template for epitaxially growing a crystalline MgO(001) layer.” PO Resp. 2 (emphasis omitted). Patent Owner describes in detail Bowen’s specific manufacturing process, including the specific structure of the MTJ manufactured, and argues the claimed invention differs. PO Resp. 30–33. These arguments are inapposite. Petitioner cites the specific teachings Petitioner relies on from Bowen, rather than adopting the entirety of Bowen’s process or MTJ. See, e.g., Pet. 21–36 (citing the portions of Bowen—that in combination with Parkin—teach claim 1). Petitioner is not “compelled to adopt every single aspect of [Bowen’s] teaching without the exercise of independent judgment.” Lear Siegler, Inc. v. Aeroquip Corp., 733 F.2d 881, 889 (Fed. Cir. 1984). We also find unavailing Patent Owner’s argument that Bowen and Parkin each teach away from Petitioner’s combination because Parkin used boron to avoid crystalline electrodes whereas Bowen tried to achieve perfect crystalline electrodes. PO Resp. 4. As we discuss above, one of ordinary skill in the art would have been motivated to replace Bowen’s electrodes with CoFeB to increase TMR. And Patent Owner does not identify in either reference a specific teaching that criticizes, discredits, or otherwise 35 M. Jimbo et al., Thermal stability of spin valves using amorphous CoFeB, 165 J. Magnetism & Magnetic Materials 308–11 (1997) (“Jimbo”). combination. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004).” slip op. at 23
Patent outcomesUS 10,680,167 mixedClaim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 10,680,167 - PTAB · Apr 15, 2026 · IPR2025-00103 · APJ Gregg I Anderson · IPR · Institution
The Board instituted IPR of claims 1–15 on all asserted grounds, finding a reasonable likelihood that Petitioner would prevail on each obviousness challenge.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Based on the current record and for the reasons explained below, we institute an inter partes review of claims 1–15 of the ’766 patent on all challenges in the Petition. Upon consideration of the Petition and the evidence of record, for the reasons given below we determine there is a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one challenged claim of the ’766 patent. Accordingly, we institute an inter partes review of claims 1–15 of the ’766 patent based upon the asserted grounds of unpatentability set forth in the Petition. Pet. 1.” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateOther
“If Petitioner succeeds in establishing these limitations lack written description support in the priority applications, then the challenged claims will not receive the benefit of the priority applications’ earlier filing dates and Singh129 will qualify as prior art. On the present record, we are not directed to adequate written description support for the limitations reciting receiving data from a “shortrange wireless enabled data capture device” or “use[s] HTTP” to upload/transfer “new-data along with user information” to a user data publishing website, and wherein “the user information corresponds to a user identifier.” See Pet. 12. Even if support for these limitations is found in Singh906, beyond the initial incorporation by reference, “Singh906 is not mentioned or otherwise referenced in the specification” of the ’766 patent, and on the current record, we are not otherwise apprised of disclosure within the four corners of the specification that demonstrates possession of the system or mobile application as claimed. For the above reasons, we determine that Petitioner has demonstrated a reasonable likelihood that the challenged claims lack adequate written description support, and thus that Singh129 qualifies as prior art to the challenged claims.” slip op. at 23
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference is prior artOther
“If Petitioner succeeds in establishing these limitations lack written description support in the priority applications, then the challenged claims will not receive the benefit of the priority applications’ earlier filing dates and Singh129 will qualify as prior art. On the present record, we are not directed to adequate written description support for the limitations reciting receiving data from a “shortrange wireless enabled data capture device” or “use[s] HTTP” to upload/transfer “new-data along with user information” to a user data publishing website, and wherein “the user information corresponds to a user identifier.” See Pet. 12. Even if support for these limitations is found in Singh906, beyond the initial incorporation by reference, “Singh906 is not mentioned or otherwise referenced in the specification” of the ’766 patent, and on the current record, we are not otherwise apprised of disclosure within the four corners of the specification that demonstrates possession of the system or mobile application as claimed. For the above reasons, we determine that Petitioner has demonstrated a reasonable likelihood that the challenged claims lack adequate written description support, and thus that Singh129 qualifies as prior art to the challenged claims.” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Petitioner argues that a person of ordinary skill in the art would have been motivated to look to the features of both Singh129 and Singh906 when considering an improved publishing system. Pet. 16. Further, Petitioner points out that Singh129 incorporates by reference the ’802 application, published as Singh906. Id. According to Petitioner, a person of ordinary skill in the art would have been motivated to modify Singh129’s system to add Singh906’s user authentication credentials to Singh129’s user preferences to give the “user more control over the publishing of their multimedia content.” Id. at 17 (citing Ex. 1030 ¶ 456). Petitioner cites four additional reasons for a person of ordinary skill in the art to modify Singh129 with Singh906 including solving a known problem, avoiding sending authentication credentials to publish content, virtual spaces provided for clients in Singh906, and that authentication credentials would have been an obvious design choice. Id. at 17–18 (citing Ex. 1009 ¶ 47, Figs. 2, 5; Ex. 1010 ¶¶ 17, 18, 27; Ex. 1030 ¶¶ 457–461). Petitioner also asserts a person of ordinary skill in the art would have had a reasonable expectation of success for the modification of Singh129 with Singh906. Pet. 18. Petitioner argues “the proposed combination would have required no more than the application of known techniques (using authentication credentials and HTTP in accordance with Singh906) to a known system (Singh129’s system) in the same field of endeavor (media publishing) and from the same assignee (CellSpinSoft) to obtain the benefits described above.” Id. (citing Ex. 1030 ¶ 461). Based on the record before us, we find sufficient the argument and evidence that the combination of Singh129 and Singh906 teaches or suggests all of the limitations of claim 1, and that a person of ordinary skill in the art would have had reason to combine features from Singh906 into Singh129 with a reasonable expectation of success, for the reasons discussed in the Petition. See Pet. 16–19. We have also reviewed Petitioner’s contentions with respect to dependent claims 2–15, and find the same for these claims. See id. at 28–38.” slip op. at 25
§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 9,900,766 - PTAB · Apr 15, 2026 · IPR2025-00102 · APJ Cynthia M Hardman · IPR · Institution
The Board instituted review of claims 1–10 on both obviousness grounds, finding a reasonable likelihood that Petitioners would prevail.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We have authority under 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons explained below, we institute an inter partes review of claims 1–10 of the ’121 patent on all challenges in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“understanding of a person of ordinary skill in the art at the time the invention was made. See Graham, 383 U.S. at 17–18. Petitioners contend that a person of ordinary skill in the art (sometimes abbreviated herein as “POSITA”) would have had: at least a bachelor’s degree in electrical engineering, computer engineering, or computer science, and two years of experience in the field consumer electronics, with exposure to digital camera technology and wireless communications. Superior education could compensate for a deficiency in work experience, and vice-versa. Pet. 6 (citations omitted) (citing Ex. 1030 (Lett Decl.) ¶¶ 94–95). Because Petitioners’ proposed level of ordinary skill in the art appears to be consistent with the cited prior art and is undisputed on this record, we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioners assert that no express constructions are required to institute review and find the challenged claims unpatentable. See Pet. 7. We find it unnecessary to construe any claim term to decide whether Petitioners satisfy the “reasonable likelihood” standard for instituting trial. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Any final written decision entered in this case may include express claim constructions, or may include discussion of claim scope that differs from that provided in our analysis in this Decision. Any final claim constructions will be based on the full trial record.” slip op. at 13
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“E. Ground 1 – Alleged Obviousness Over Hiroishi, Kahn, Endsley, and Bluetooth Petitioners assert that claims 1–10 are unpatentable as obvious over the combination of Hiroishi, Kahn, Endsley, and Bluetooth. Pet. 16–65. After considering Petitioners’ arguments and cited evidence, we find that for purposes of institution, Petitioners have shown a reasonable likelihood of establishing that claims 1–10 are unpatentable as obvious over the combination of Hiroishi, Kahn, Endsley, and Bluetooth.” slip op. at 21
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 11,234,121
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.