• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• Tesla, Inc. v. Charge Fusion Technologies, LLCAll claims unpatentable
  PTAB · Jul 13, 2026 · IPR2025-00153 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of one of ordinary skill in the art at the time of the invention. Tesla submits that one of ordinary skill in the art would have had at least a bachelor’s degree in electrical or mechanical engineering (or an equivalent field) and at least two years of work experience involving automotive systems, including electric vehicle power management. . . . Additional industry 1 US 2009/0313034 A1, pub. Dec. 17, 2009 (Ex. 1004, “Ferro”). 2 EP 1,920,968 A1, pub. May 14, 2008 (Ex. 1005, “Oyobe”). 3 US 7,124,691 B2, iss. Oct. 24, 2006 (Ex. 1006, “Donnelly”). 4 Steven E. Letendre, The V2G Concept: A New Model for Power? PUBLIC UTILITIES FORTNIGHTLY, Feb. 15, 2002, at 16 (Ex. 1007, “Letendre”). 5 US 5,654,621, iss. Aug. 5, 1997 (Ex. 1078, “Seelig”). 6 US 6,662,083 B1, iss. Sep. 16, 2003 (Ex. 1010, “Knockeart”). experience or technical training may offset less formal education, while advanced degrees or additional formal education may offset lesser levels of industry experience. Pet. 2 (citing Ex. 1003 ¶¶ 14–15). Charge Fusion “takes no position with respect to Petitioner’s proposed level of ordinary skill.” PO Resp. 17. For purposes of our analysis, we apply Tesla’s proposed level of ordinary skill, which we find to be consistent with the problems addressed in the ’987 patent and the prior art. B. Claim Interpretation” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “1. “dynamic attribute of an electric charge provider” In the Petition, Tesla proposes that we construe “dynamic attribute of an electric charge provider,” as recited in every independent claim, to mean “a changing or otherwise fluctuating cost (or price) of electricity for purchase from an electric charge provider.” Pet. 4–5. Charge Fusion responds that Tesla improperly narrows the meaning of this claim limitation. PO Resp. 15 (arguing this claim term “is not just limited to ‘changing or otherwise fluctuating cost (or price)’ as alleged by the Petition” (emphasis added)). Although we consider Tesla’s proposed construction to identify an exemplary “dynamic attribute of an electric charge provider,” we see no need to limit the meaning of this limitation as proposed by Tesla. Indeed, Tesla agrees. See Pet. Reply. 7 (arguing only that this claim limitation “at least includes” such an example). And Charge Fusion does not contend otherwise. See PO Resp 15 (arguing only that this limitation “is not just limited to” cost fluctuations). As such, we see no need to further construe this claim limitation. 2. “determine . . . a charging schedule for the vehicle” Limitation 1[g] recites “determine, based at least on the one or more charging preferences and at least one current value of a dynamic attribute of an electric charge provider, a charging schedule for the vehicle.” Independent claim 8, 15, and 22 recite a materially identical limitation. Tesla submits that this limitation should not be construed as a means-plus- function limitation under 35 U.S.C. § 112(6). See Pet. 5. Charge Fusion agrees that “nothing in the claim invokes [§] 112(6).” PO Resp. 16. As such, we discern no dispute regarding the meaning of this claim limitation.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “Initially, we note that, as claimed, there is no express restriction on the manner in which the “amount” or “charge” is specified or otherwise expressed. Indeed, the Specification uses both “desired charge percent level” and “desired charge range level” as alternative ways for a user to specify an “amount of charge.” Ex. 1001, 14:53–15:8 (emphases added). The Specification defines “desired charge range level” as meaning “a desired distance to travel.” Id. at 15:3–8. Elsewhere, the Specification describes that a user may specify the amount of charge as follows: “the user may indicate a desired charging level (and/or a desired charging level may be automatically calculated) based on a desired distance of travel.” Id. at 19:49–57 (emphasis added). More specifically, annotated Figure 7 of the ’987 patent, reproduced below, demonstrates how a user may select “amount of charge” in terms of a desired mileage range 720 or a percentage level 718. See Pet. Reply 2. As shown in red, annotated Figure 7 illustrates that a user selects “desired charge level 720” on “vehicle charge indicator 714” by moving a slider to a value specified in “miles” (e.g., 110 miles). The Specification, after discussing selecting a desired charge percent level 718, explains: The user may also or alternatively view and/or change the desired charge range level 720. An estimate of how far the vehicle can travel on a given charge amount (which may be a general average and/or may be computed based on a specific itinerary and/or past driving habits) can be determined, for example, and utilized to express the desired charge level in terms of distance capable of being traveled. In such a manner, for example, a user may determine a desired distance to travel (e.g., how far it is from home to work or vice versa) and may set the desired charge range level 720 to match the desired distance. Ex. 1001, 14:65–15:8. Thus, the Specification confirms that “amount of charge” may be expressed in terms of a desired mileage as well as a desired percentage level.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree. Charge Fusion’s reliance on Wonderland is misplaced and does not support the proposition for which it is cited. In Wonderland, the district court denied the accused infringer’s motion for summary judgment of invalidity, in part, because genuine issues of material fact existed as to whether there was sufficient motivation to combine the prior art. Wonderland, 988 F. Supp. 2d at 511. As such, the district court’s Wonderland decision does not constitute a final ruling on the motivation to combine issue, and the Federal Circuit’s summary affirmance of the district court’s ruling neither addresses the issue nor reflects how the issue was resolved at trial. See Wonderland NurseryGoods Co. v. Thorley Indus., LLC, 644 F. App’x 1011 (Fed. Cir. 2016). Moreover, contrary to Charge Fusion’s assertion, Tesla correctly notes that although Ferro refers to wireless charging, it provides no implementation details. Ex. 1004 ¶ 36; Ex. 2006, 54:8–55:9. Nonetheless, Ferro does describe manual options for initiating charging, and Tesla’s expert credibly testifies that one of ordinary skill in the art would have been motivated to apply Oyobe’s vehicle sensor to allow a user to initiate Ferro’s charging methods more easily without having to leave the vehicle. See Ex. 1003 ¶¶ 146, 151, 152 (citing Ex. 1004 ¶ 109). Accordingly, we find that Tesla establishes that one of ordinary skill in the art would have been motivated to incorporate Oyobe’s use of a sensor to establish presence of a vehicle near a charging station into Ferro’s system.” slip op. at 17

  Patent outcomesUS 11,631,987 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 11,631,987
• Tesla, Inc. v. Charge Fusion Technologies, LLCAll claims unpatentable
  PTAB · Jul 13, 2026 · IPR2025-00152 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–17 are unpatentable as obvious: claims 1–4, 6–9, and 11–14 over Sutardja, Donnelly, and Letendre; claims 5, 10, and 15 with Seelig; claims 16 and 17 with Knockeart.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of one of ordinary skill in the art at the time of the invention. Tesla submits that one of ordinary skill in the art would have had at least a bachelor’s degree in electrical or mechanical engineering (or an equivalent field) and at least two years of work experience involving automotive systems, including electric vehicle power management. . . . Additional industry experience or technical training may offset less formal education, 1 US 2008/0136371 A1, pub. Jun. 12, 2008 (Ex. 1011, “Sutardja”). 2 US 7,124,691 B2, iss. Oct. 24, 2006 (Ex. 1006, “Donnelly”). 3 Steven E. Letendre, The V2G Concept: A New Model for Power? PUBLIC UTILITIES FORTNIGHTLY, Feb. 15, 2002, at 16 (Ex. 1007, “Letendre”). 4 US 5,654,621, iss. Aug. 5, 1997 (Ex. 1078, “Seelig”). 5 US 6,622,083 B1, iss. Sep. 16, 2003 (Ex. 1010, “Knockeart”). while advanced degrees or additional formal education may offset lesser levels of industry experience. Pet. 2–3 (citing Ex. 1003 ¶ 29). Charge Fusion “takes no position with respect to Petitioner’s proposed level of ordinary skill in the art.” PO Resp. 9. For purposes of our analysis, we apply Tesla’s proposed level of ordinary skill, which we find to be consistent with the problems addressed in the ’788 patent and the prior art. B. Claim Interpretation” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “shown in Figure 7 of the ’788 patent. Pet. 4–5. Charge Fusion responds that Tesla’s proposed construction should be rejected because it “wrongly import[s] embodiments from the specification.” PO Resp. 14–16. We discern no dispute over the meaning of “unitary vehicle charge indicator” because, contrary to what Charge Fusion argues, Tesla does not contend that this limitation is “required to be limited to” the bar graph embodiment of Figure 7, only that it “at least includes” that embodiment. Compare Pet. 5, with PO Resp. 14–16. Tesla also argues that the “first” and “second” portions of the unitary vehicle charge indicator—which indicate the charged and uncharged capacities of the battery—recite merely “communicative content,” and thus, are “not entitled to any patentable weight” because they are directed to nonfunctional printed matter. Pet. 5–7 (citing various case law). At the same time, however, Tesla maintains that “[r]egardless, Donnelly teaches a bar graph indicating the amount of charge and uncharged capacity.” Pet. Reply 11–12 (citing Pet. 33–34); see also Hrg. Tr. 74:22–25, 75:9–11. For reasons expressed below, we agree that Tesla persuasively demonstrates that the asserted combination teaches the “unitary vehicle charge indicator element” as claimed and construed by Charge Fusion. Accordingly, we need not decide the printed matter issue.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “Initially, we note that, as claimed, there is no express restriction on the manner in which the “amount” or “charge” is specified or otherwise expressed. Indeed, the Specification uses both “desired charge percent level” and “desired charge range level” as alternative ways for a user to specify an “amount of charge.” Ex. 1001, 14:63–15:18 (emphases added). In particular, the Specification defines “desired charge range level” as meaning “a desired distance to travel.” Id. at 15:8–18. Elsewhere, the Specification describes that a user may specify the amount of charge as follows: “the user may indicate a desired charging level (and/or a desired charging level may be automatically calculated) based on a desired distance of travel.” Id. at 19:59–67 (emphasis added).” slip op. at 9

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “full charge” for the battery, and thus, Tesla fails to explain how the combination of Sutardja with Donnelly’s battery bar graph image “would allow a user to select a specific amount of charge or how this would result in a unitary vehicle charge indicator,” as claimed. PO Resp. 30. According to Charge Fusion, “[l]imiting the single option of ‘full charge’ as described in Sutardja would defeat the purpose of implementing a slider” as taught by Donnelly. Id. (citing Ex. 2008 ¶ 72). We disagree. Charge Fusion’s argument rests on the mistaken premise that Sutardja only contemplates selecting a full amount of charge for the battery and not an amount below a full charge, i.e., a partial charge. But that is not what Sutardja says. More accurately, Sutardja teaches that the user specifies the amount of charge—"The user interface module 108 may comprise a key pad, a display, a microphone, and/or a speaker (all not shown). A user of the vehicle 102-1 may use the user interface module 108 to set charging parameters for charging the battery 14.” Ex. 1011 ¶ 243. Elsewhere, Sutardja teaches that the user may set a “predetermined level” of charge— The charge monitoring module 150 may inform the control module 112 when the battery 14 is charged to a predetermined level (e.g., full charge) that may be indicated in the charging parameters. Subsequently, the charge monitoring module 150 may stop charging the battery 14 by deactivating the converter 156 and the charging module 152. The power meter 24 may measure the amount of power received from the utility company 23 during the charging operation. Id. ¶ 270 (emphases added). Although that passage indicates that a “full charge” is an example of a “predetermined level” of charge, nowhere does it exclude the selection of a lesser amount. Indeed, the passage contemplates the ability to “stop charging the battery,” which indicates that selection of the predetermined level may be less than a full charge. Id. Thus, we are not persuaded by Charge Fusion’s argument to the contrary. Rather, in our view, Tesla demonstrates by a preponderance of the evidence that the Sutardja-Donnelly combination teaches a “unitary vehicle charge indicator” that includes at least “first” and “second” portions and that one of ordinary skill in the art would have had reason to successfully combine their respective teachings in a manner that allows a user to predetermine, i.e., specify, an amount of charge. slip op. at 17

  Patent outcomesUS 11,990,788 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 11,990,788
• Nxtgen Toys, LLC v. Zipstring, LLCAll claims unpatentable
  PTAB · Feb 20, 2026 · IPR2024-01213 · APJ Richard H Marschall · IPR · Final written decision

  Claims 1–4, 12, and 15–17 are unpatentable; substitute claim 27 is allowed, while substitute claims 21–26 and 28 are denied as obvious.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person having ordinary skill in the art at the time of the invention “was typically a person with a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or other science or 6 Patent Owner does not rely on any objective indicia of nonobviousness in this proceeding. engineering based degree that [was] familiar with general principles of mechanics and aerodynamics with at least two years of experience in product design and development in the field of toys or other amusement type devices.” Pet. 32 (citing Ex. 1002 ¶¶ 2–6, 22–26). Patent Owner states that it submitted the following proposal for a POSITA in the related district court litigation: “[a POSITA] would have had at least a B.S. degree in Mechanical Engineering, Electrical Engineering, Aerospace Engineering, Industrial Design, Product Design, or similar field, with at least two years industry experience in one of these fields, and such POSITA would have been familiar with general principles of mechanics, fluid mechanics and aerodynamics.” PO Resp. 4–5. We note that the parties’ proposals overlap considerably, and neither party argues the inadequacy of the other party’s proposal or that any patentability issue in this case turns on the resolution of this issue. We find Petitioner’s definition consistent with the problems and solutions disclosed in the ’774 patent and prior art of record, and adopt it as our own. See, e.g., GPAC, 57 F.3d at 1579 (approving the determination of the level of ordinary skill in the art by appeal to the references of record). We would arrive at the same findings and conclusions in this Decision if we adopted Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Id. at 1312–13. Only terms in controversy need be construed, and only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner contends that no “term requires construction to resolve the invalidity grounds presented in this Petition since the prior art renders claims 1–4, 12, and 15–17 unpatentable under any reasonable interpretation of the claims.” Pet. 7. Patent Owner argues that it “does not believe express claim constructions are necessary during this proceeding because the claims can readily be given their ordinary and customary meaning in the context of the patent at the time it was filed.” PO Resp. 5. Based on the parties’ positions and our view of the record, we need not expressly construe any claim limitations to resolve the issues in this Decision. To the extent that any implicit claim construction issues relate to the issues raised by the parties, we address them in the context of the parties’ patentability arguments below.” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentableUnpatentable

    “string, and that adding Scorch’s slot removes this arguably inconvenient process by allowing insertion and removal of a string without removing and reinstalling any aspects of the housing. See Pet 85–86 (citing Ex. 1002 ¶¶ 174–175; Ex. 1007, 3:30–3:53, 6:03; Ex. 1008, 3:46–4:45); Pet. Reply 18–20 (citing in part Ex. 2002 ¶ 187 (Dr. Janét’s testimony that Wagner’s removal and reinstallation of a cover “may be viewed as an inconvenient process”)). Making insertion and removal of the string easier and quicker provides a notable advantage over Wagner’s existing device. See id. Scorch itself supports this argument and the related expert testimony because it discusses insertion and removal of strings and stated that the slot allows a user to “swap them out really quick.” Ex. 1007, 3:30–53. Petitioner also persuasively argues that a POSITA would know how to add the slot while maintaining the proper operation of the device, such as allowing insertion and removal of the string and avoiding inadvertent exiting of the string from the device. See Pet. 86–87 (citing Ex. 1002 ¶¶ 175–176; Ex. 1007, 4:00–30, Ex. 1008, 2:49–52); Pet. Reply 19, 21 (citing Ex. 1002 ¶¶ 174–176). We find Petitioner’s arguments and reasoning in support of adding Scorch’s slot to Wagner’s housing straightforward and persuasive. Patent Owner’s arguments against the combination do not directly refute Petitioner’s reasoning or cast doubt on Scorch’s statement that its slot enables “quick” insertion and removal of a string—quicker than Wagner’s method that requires removal and replacement of a cover on its housing. See PO Resp. 16–22; PO Sur-reply 14–20; Ex. 2002 ¶ 187 (acknowledging inconvenience of Wagner’s existing process for insertion and removal of a string). Patent Owner suggests that Petitioner’s proposed combination fails to take into consideration certain drawbacks such as the risk of inadvertent string exit from the housing or slot, but Petitioner expressly addresses such concerns in the Petition. See PO Resp. 18 (stating that Scorch’s slotted funnel may allow the string to “shoot out the slot” and that Scorch addresses this by adding “a bent wire” to “prevent the string from coming out the side”); PO Sur-reply 16–17; Pet. 86–87 (arguing that Wagner’s flanges would help to trap the string in place, but if not, Scorch’s additional structures could be used to restring the string and “to further reduce the risk of a string inadvertently exiting” the device). We agree with Petitioner that a POSITA would understand how to incorporate Scorch’s slot without causing inadvertent removal of the string—using structures already present in Wagner and Scorch—and the need to add such unclaimed structurers does not teach away from the combination as Patent Owner suggests. See Pet. 86–87; PO Resp. 22. We also agree with Petitioner that a POSITA would understand how to make minor modifications, if necessary, to allow insertion and removal of the string around Wagner’s flanges. See Pet. Reply 21 (citing Ex. 1002 ¶¶ 174–176).” slip op. at 26

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “refute Petitioner’s reasoning or cast doubt on Scorch’s statement that its slot enables “quick” insertion and removal of a string—quicker than Wagner’s method that requires removal and replacement of a cover on its housing. See PO Resp. 16–22; PO Sur-reply 14–20; Ex. 2002 ¶ 187 (acknowledging inconvenience of Wagner’s existing process for insertion and removal of a string). Patent Owner suggests that Petitioner’s proposed combination fails to take into consideration certain drawbacks such as the risk of inadvertent string exit from the housing or slot, but Petitioner expressly addresses such concerns in the Petition. See PO Resp. 18 (stating that Scorch’s slotted funnel may allow the string to “shoot out the slot” and that Scorch addresses this by adding “a bent wire” to “prevent the string from coming out the side”); PO Sur-reply 16–17; Pet. 86–87 (arguing that Wagner’s flanges would help to trap the string in place, but if not, Scorch’s additional structures could be used to restring the string and “to further reduce the risk of a string inadvertently exiting” the device). We agree with Petitioner that a POSITA would understand how to incorporate Scorch’s slot without causing inadvertent removal of the string—using structures already present in Wagner and Scorch—and the need to add such unclaimed structurers does not teach away from the combination as Patent Owner suggests. See Pet. 86–87; PO Resp. 22. We also agree with Petitioner that a POSITA would understand how to make minor modifications, if necessary, to allow insertion and removal of the string around Wagner’s flanges. See Pet. Reply 21 (citing Ex. 1002 ¶¶ 174–176). At best, Patent Owner’s arguments on this issue establish potential drawbacks in Petitioner’s proposed combination, but drawbacks alone do not defeat Petitioner’s obviousness rationale that includes readily apparent benefits. See Winner Int’l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit . . . should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another.”); Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine “). In addition, even if Patent Owner were correct that Wagner’s existing design works as well as Petitioner’s proposed combination, given all of the tradeoffs involved, that would not fatally undermine Petitioner’s showing. In re Fulton, 391 F.3d 1195, 1200 (Fed. Cir. 2004) (obviousness does not require that the proposed combination “is the preferred, or most desirable, combination”). On this record, Petitioner’s (and Scorch’s) stated advantages that are achieved when adding Scorch’s slot to Wagner’s housing adequately support Petitioner’s motivation to combine rationale.” slip op. at 26

  Patent outcomesUS 11,674,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Nautilus
  Patents in suitUS 11,674,774
• Boe Technology Group Co., Ltd. v. Optronic Sciences LLCAll claims unpatentable
  PTAB · Feb 17, 2026 · IPR2024-01132 · APJ Kevin W Cherry · IPR · Final written decision

  Claims 1–7 are unpatentable: claims 1–3 and 5 are anticipated by Anzai, claim 4 is obvious over Anzai and Yamazaki, and claims 1–7 are obvious over Yamazaki and Anzai.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner describes a person of ordinary skill in the art (“POSITA” or “ordinarily skilled artisan”) at the time of the invention as having “a Bachelors’ degree in electrical engineering or a comparable field of study, plus approximately two to three years of professional experience with electronic and optoelectronic device design” and notes that “[a]dditional graduate education could substitute for professional experience, and significant experience in the field could substitute for formal education.” Pet. 5–6 (citing Ex. 1002, Neikirk Decl., ¶ 23). Patent Owner’s expert, Dr. Bretschneider testifies that In my opinion, the field of “electronic and optoelectronic device design” is too broad. A POSITA of the ’121, had at least a Bachelors’ degree in a field of engineering or physics and at least two to three years of professional experience related to the design and manufacture of the relevant aspects of flat panel displays. Additional relevant graduate education related [sic] could reduce but not eliminate the time requirement for professional experience. While Dr. Neikirk proposes a different definition of a POSITA, the differences do not have material effect on my opinions rendered below. Regardless of which definition of a POSITA were used, my conclusions would remain the same Ex. 2005, Bretschneider Decl., ¶ 39. We agree with and will apply Petitioner’s statement of the level of ordinary skill in the art. This level of ordinary skill is reflective of the education and experience that would have been required to understand the problems and solutions identified in the ’121 patent and the prior art. Okajima v. Bourdeau, 261 F.3d 1350 (Fed. Cir. 2001). We note that our conclusions would be the same even if we applied Patent Owner’s slightly narrower definition of a POSITA.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We find these definitions to be of some help in construing this term. We find that the common thread is that a “passivation layer” is an insulating layer that provides protection from the environment to the layers below it. See Ex. 1012, 140; Ex. 1013, 542, Ex. 1014, 798; Ex. 2010, 3; Ex. 2013, 1. We find this construction to be most consistent with the broad claim language and the disclosure in the Specification. Although “tying up dangling bonds,” may be a mechanism by which some materials provide such protection, nothing in the Specification or the extrinsic evidence provided appears to require that. Also, while chemical protection may be one kind of protection none of the evidence suggests that is the only protection that is provided. Moreover, nothing in the Specification supports reading a chemical protection requirement into the construction. Thus, we decline to adopt that portion of Patent Owner’s construction. Instead, we construe passivation layer as “an insulating layer that provides protection from the environment to the layers below it.” We need not construe the term any further to resolve the parties’ dispute over this claim language. See Realtime, 912 F.3d at 1375.” slip op. at 19

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “constructions for “passivation layer” and “capping layer.” We find that Petitioner has presented sufficient evidence to show that Anzai discloses both a “passivation layer” and a “capping layer.” As we explained above, we have construed “passivation layer” to mean “an insulating layer that provides protection from the environment to the layers below it.” Petitioner has shown that “first planarization film 17” is an insulating layer. See Ex. 1002 ¶¶ 62–65. We further find that Petitioner has shown sufficiently that “first planarization film 17” is “formed over the entire surface for flattening, which will protect the semiconductor surface from the surrounding environment.” Id. ¶ 63. We have rejected Patent Owner’s contentions that the film must tie up “dangling bonds,” and instead determined that protecting the surface from the environment is sufficient. Thus, we find that Petitioner has shown by a preponderance of the evidence that Anzai discloses the “passivation layer” of claim 3. As we explained above, we have construed “capping layer” to be “an insulation layer covering (i.e., capping) an underlying layer or structure.” Here, Petitioner has shown that Anzai’s planarization film 19 meets the claimed “capping layer.” See Pet. 20. We find that Petitioner has shown that it is more likely than not that “planarization film 19” is made of insulating material. As Dr. Neikirk persuasively testifies, Anzai discloses that planarization layer 17 may be made of an organic resin for flattening the surface. EX1003, 4:20-24. While Anzai does not disclose the material for planarization layer 19, it must be made of an insulation material because in the embodiment of Fig. 3A, it is the sole layer between electrode layer 71 and cathode layer 65 forming the second capacitor. Id., 6:3–8; Fig. 3A. Moreover, Anzai discloses that the first planarization film 17 and the second planarization film 19 for the first embodiment “function as the capacitance insulating film for this configuration.” Id., 5:62–67. Ex. 1002, Neikirk Decl., ¶ 62. We find this testimony well-reasoned and entitled to substantial weight. We further agree with Dr. Neikirk that a “POSITA would further understand that the second planarization film 19 is then further disposed on the first planarization film 17 (capping the passivation layer).” Id. ¶ 63 (citing Ex. 1003, 5:3–13; Figs. 2A–B, 3A–B). Thus, we find that Petitioner has shown by a preponderance of the evidence that Anzai discloses the claimed “capping layer.” Accordingly, we find that Petitioner has shown by a preponderance of” slip op. at 32

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “motivation to combine Anzai and Yamazaki. See Pet. 25–27; Ex. 1002, Neikirk Decl., ¶¶ 78–79. First, Patent Owner argues that essentially silicon nitride is an inferior material to use for Anzai’s planarization layer 17 compared with organic resin. PO Resp. 13–15. However, “[i]t’s not necessary to show that a combination is the best option, only that it be a suitable option.” Intel Corp. v. Qualcomm Inc., 21 F.4th 797, 800 (Fed. Cir. 2021) (emphasis in original). Patent Owner does not argue that silicon nitride would not work, but rather that it would be more difficult and more expensive to use. See PO Resp. 14. But “the fact that the two disclosed apparatus[es] would not be combined by businessmen for economic reasons is not the same as saying that it could not be done because skilled persons in the art felt that there was some technological incompatibility that prevented their combination. Only the latter is telling on the issue of nonobviousness.” Grit Energy Solutions LLC v. Oren Techs., LLC, 957 F.3d 1309, 1323 (Fed. Cir. 2020) (quoting Orthopedic Equip. Co., Inc. v. United States, 702 F.2d 1005, 1013 (Fed. Cir. 1983)). “Likewise, a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.” Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006). Here, Petitioner explains that “a POSITA would have known that organic materials usually have lower dielectric constants than inorganic materials, such as SiN, and a higher dielectric constant is desirable for the insulator in a capacitor since that leads to higher capacitance per unit area.” Pet. 26 (citing Ex. 1002, Neikirk Decl., ¶ 78). Petitioner further explains that this “then allows a reduced area storage capacitance element, one of the objectives of Anzai.” Id. (citing Ex. 1003, code (57)). Patent Owner’s focus mainly on planarization (PO Sur-reply 16–17) ignores that the Anzai’s planarization layers 17 and 19 also “function as the capacitance insulating film.” Ex. 1003, 5:65–67. Thus, although there are tradeoffs, Petitioner has shown sufficiently that a POSITA would have been motivated to incorporate the teachings of Yamazaki regarding potential materials for planarization layers 17 and 19. Second, Patent Owner argues that a Petitioner has failed to provide an adequate reason to select silicon nitride from Yamazaki’s list of potential materials. We disagree. Petitioner has explained the benefits of selecting a high dielectric inorganic material. Pet. 26. Yamazaki provides only three potential options—silicon oxide, silicon nitride, and silicon oxynitride. See Ex. 1004, 11:45–50. Moreover, Dr. Neikirk testified, supported by multiple references, that using silicon nitride was well known in the prior art at the time of the invention. See Ex. 1002, Neikirk Decl., ¶ 75 (citing Ex. 1007; Ex. 1008; Ex. 1009). “When there is a design need or market pressure to solve a problem and there are a finite number of identified, predictable solutions, a person of ordinary skill has good reason to pursue the known options within his or her technical grasp.” KSR, 550 U.S. at 421. Indeed, “[i]f a person of ordinary skill can implement a predictable variation, § 103 likely bars its patentability.” Id. at 417. This is the case here. Petitioner has shown that a person of ordinary skill seeking to improve the capacitance of Anzai’s planarization layers 17 and 19, without increasing the size of the capacitor, would have looked at the inorganic materials identified in Yamazaki as suitable for the purpose, and it would have been would obvious to choose silicon nitride, a well-known, and predictable material for the application. Thus, we disagree with Patent Owner that Petitioner has failed to show a sufficient reason for selecting silicon nitride from Yamazaki’s list of suitable materials. Third, Patent Owner argues that Petitioner’s contentions only support” slip op. at 37

  Patent outcomesUS 7,586,121 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,586,121
• Boe Technology Group Co., Ltd. v. Optronic Sciences, LLCAll claims unpatentable
  PTAB · Jan 26, 2026 · IPR2024-01133 · APJ Thu A Dang · IPR · Final written decision

  Claims 1–13 are unpatentable: claims 1–5, 9, and 12–13 as anticipated by Weaver, and claims 6–8 and 10–11 as obvious over the stated combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1354–55 (Fed. Cir. 2001) (holding that absent evidence to the contrary, “the prior art itself [may] reflect[] an appropriate level” of ordinary skill in the art). In general, we agree with the areas of agreement in the parties’ proposals. In particular, Patent Owner proposes “at least a Bachelors’ degree in a field of engineering or physics,” which includes “electrical engineering or a comparable field of study” as Petitioner proposes. Pet. 4 (emphasis added); PO Resp. 10. We agree with Petitioner that by defining the engineering field as “electrical” or “comparable,” we can exclude engineering fields “having nothing to do with displays, such as biomedical, civil, chemical or environmental engineering.” Pet. Reply 1. Petitioner also proposes approximately “one or more years of professional experience” which includes Patent Owner’s “at least two years of professional experience.” Pet. 4; PO Resp. 10. Furthermore, both parties agree that “[a]dditional graduate education could [reduce . . . the time requirement] for professional experience.” Id. Thus, we adopt both parties’ proposed POSITA of having a Bachelors’ degree in electrical engineering or a comparable field of study, plus at least two years of professional experience, wherein additional graduate education could reduce the time requirement for professional experience. Id. Such proposal comports with the level of ordinary skill in the art reflected in the prior art of record.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther

    “The plain language in claim 1 of “auxiliary electrode” does not preclude that the “electrode” may be a power line, bus line, or resistor. Ex. 1001, 8:47–52. Nothing in the Specification clearly precludes “auxiliary electrode” from being a “bus line” or “power line,” as Patent Owner proposes. PO Resp. 25–27. We are unpersuaded by Patent Owner’s contention that the Specification discloses that “the power line ‘PL’ is shown in Figure 1, but the power line PL is not an electrode that is shown in Figure 2.” Id. at 26–27. Here, Patent Owner points to no portions in the Specification that provide the requisite “reasonable clarity, deliberateness, and precision” to warrant interpreting the claim language at issue as supporting Patent Owner’s contention that an auxiliary electrode cannot be a power line, bus line, or resistor. Id.; In re Paulsen, 30 F.3d 1475, 1480 (Fed. Cir. 1984). That is, although Patent Owner points to Figures 1 and 2 of the Specification for support of its contention, Figures 1 and 2 of the Specification merely show various examples of power line and an auxiliary electrode. PO Resp. 26–27. Thus, although the referenced portions of the Specification discuss various examples wherein an auxiliary electrode may be implemented, nothing in these referenced portions of the Specification clearly precludes the “auxiliary electrode” from being a power line or any electrode that is “the road to get to an end point,” as Patent Owner contends. Id. Patent Owner points to no special definition, implicit or explicit, for “auxiliary electrode” that is set forth in the Specification which supports Patent Owner’s construction with reasonable clarity, deliberateness, and precision. Paulsen, 30 F.3d at 1480.” slip op. at 15

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “We find Patent Owner’s arguments unavailing. In particular, we find unavailing Patent Owner’s contention that “‘bus line 430’ is not an ‘auxiliary electrode’” (PO Resp. 28–33), because Patent Owner is relying on a claim construction of “auxiliary electrode” as precluding “essential” elements and requiring “more than the end structure of a conductor” (id.), that is not adopted by our construction discussed above. Here, we are persuaded by Petitioner’s reliance on Weaver’s bus line 430 for providing the claimed “electrode,” that is “supplemental to other electrodes in the structure.” Pet. 18; see also Ex. 1004 ¶ 26, Fig. 4; Ex. 1003 ¶ 92. We find availing Petitioner’s contention, supported by Dr. Baker’s testimony, that a POSITA would have understood that “anode 406 and bus line 430 are connected in parallel,” which means that “bus line 430 is a supplemental electrode that reduces the total resistance of the pixel structure.” Pet. 19; Ex. 1003 ¶ 94. Thus, we find availing Petitioner’s contention, supported by Dr. Baker’s testimony, that Weaver’s bus line 430 is an electrode supplemental to other electrodes in the structure that is electrically insulated from transistor 410 by passivation layer 409, wherein OLED 400, which includes cathode 422, organic layer 424, and anode 406, is disposed above bus line 430, and wherein anode 406 of OLED 400 is electrically connected to bus line 430 by via 428. Pet. 16–19; Ex. 1003 ¶¶ 89–94. That is, we find availing Petitioner’s contention that, like the ’509 patent’s auxiliary electrode 120, bus line 430 is electrically insulated from transistor 410, wherein OLED 400 is disposed above bus line 430 and anode 406 electrically connected with bus line 430. Compare Pet. 2–3 (annotated” slip op. at 26

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “We also find unavailing Patent Owner’s contention that the proposed modifications to Weaver would involve changing the process. PO Resp. 33– 34. We agree with Petitioner, whose contentions are supported by Dr. Baker’s testimony, that “to provide additional components from the same layer is a layout change that a POSITA would have been able to perform without changing the process.” Pet. Reply 17–18 (citing Ex 1003 ¶ 157; Ex. 1020 ¶ 45). Further, contrary to Patent Owner’s contention that POSITA would not have combined Weaver with Lee ’053, Song, Lee ’149, or Bae without the use of hindsight (PO Resp. 33–45), as Petitioner points out, Lee ’149, for example, “explicitly teaches that ‘the electrode pattern 45 serves to lower the resistance of the first electrode 41.” Pet. Reply 58 (citing Ex. 1011 ¶ 38). Similarly, Bae “explicitly teaches that the “auxiliary electrodes 139 contact the first electrode 132 to commonly apply a voltage to the sub-pixels” and “reduces the resistance of the first electrode.” Id. at 66 (citing Ex. 1012 ¶¶ 37, 59). As such, Petitioner’s proposed combinations are supported by at least by Lee ’149’s and Bae’s teachings of applying a second electrode to lower the resistance and voltage drop between anode 406 and the VDD line of Weaver. See, e.g., Ex. 1011 ¶ 38; Ex. 1012 ¶¶ 37, 59. We are persuaded by Dr. Baker’s testimony that a POSITA would have understood that higher resistance between the power or ground line to the light emitting device would consume more power and require higher operating voltages, and thus, would have been motivated to implement the solutions of Lee ’053, Song, Lee ’149, or Bae to lower the resistance between anode 406 and voltage source VDD in Weaver. Ex. 1003 ¶¶ 145, 158, 184, 203. We agree with Petitioner, supported by Dr. Baker’s testimony, that a POSITA would have had a reasonable expectation of success the combining the references as suggested, wherein such modification “involves modifications of only routine skill in the art,” which “involve known method,” and “would have yielded predictable results. Pet. 42, 48–49, 59, 67–68; Ex. 1003 ¶¶ 145, 158, 184, 203. That is, we determine that Petitioner has set forth reasoning with rational underpinning explaining why it would have been obvious to combine the teachings with a reasonable expectation of success. Based on the complete record presented, we determine Petitioner has shown by a preponderance of the evidence that claims 6–8 would have been obvious over the combination of Weaver and Lee ’053 or alternatively over the combination of Weaver and Song, and that claims 10 and 11 would have been obvious over the combination of Weaver and Lee ’149 or alternatively over the combination of Weaver and Bae.” slip op. at 33

  Patent outcomesUS 9,263,509 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,263,509
• Boe Technology Group Co., Ltd. v. Optronic Sciences LLCSome claims unpatentable
  PTAB · Jan 26, 2026 · IPR2024-01130 · APJ Benjamin D M Wood · IPR · Final written decision

  Claims 5 and 6 are unpatentable over the instituted grounds; claims 7–9 were not shown unpatentable because their scope could not be ascertained.

  RulingsFinal written decision

  • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner

    “After the hearing, with our authorization,1 Patent Owner moved to dismiss this proceeding because, according to Patent Owner, the Petition did not identify all real parties-in-interest as required be 35 U.S.C. § 312(a)(2). 1 IPR2024-01131, Paper 43, 45:1–8. Paper 42. Petitioner opposed the motion. Paper 44. We denied the motion. Paper 46.” slip op. at 2

  • Skill levelSkill level board ownOther

    “arguments and evidence in support of its proposed definition of the level of ordinary skill in the art at the time of the invention, we determine that Petitioner’s definition is too broad. Petitioner asserts that one of ordinary skill in the art would have “approximately one or more years of professional experience with electronic and optoelectronic system design.” Pet. 3. But Petitioner does not appear to dispute the testimony of Patent Owner’s declarant, Dr. Bretschneider, that “the field of optoelectronics” is “broad and expansive and encompasses solar cells, optical fiber, and any application of LEDs, not just the design of LED packages.” Ex. 2020 ¶ 78. Therefore, one having experience with optoelectronic system design would not necessarily have experience designing LED backlights for LCD displays. We have also carefully considered Patent Owner’s arguments and evidence in support of its proposed definition of the level of ordinary skill in the art at the time of the invention. In light of our analysis of the prior art and the AAPA, we determine that Patent Owner’s requirement of “at least one year of practical experience in design of LED packages and one year of practical experience in design of thermal management systems for LEDs” is not sufficiently precise. Patent Owner does not specify that the required experience is in the context of designing LED backlights for LCD displays. One having this experience would necessarily have experience addressing thermal-management concerns associated with such backlights.” slip op. at 18

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “Because Dr. Baker does not have the requisite experience designing LED backlights for LCD displays, he is not qualified to offer expert testimony from the vantage point of a person of ordinary skill in the art of designing LED backlights for LCD displays. Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1377–78 (Fed. Cir. 2022).” slip op. at 23

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “Neither party asserts that “connecting” is a term of art requiring expert testimony to construe. We agree with Petitioner that “connecting” should be construed consistently with the “fastener” term, because it is the “fastener” (or the second portion thereof) to which the circuit board is “connecting.” Because the parties agree that “fastener” is “[a] feature that attaches or holds something in place, “connecting” means “attaching or holding.”” slip op. at 26

  Patent outcomesUS 7,168,842 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,168,842

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.