- Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentablePTAB · Jun 30, 2026 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Final written decision
Claims 1–17 were not shown unpatentable because Petitioner failed to establish that Usui’s interconnect structure or Yu’s metal gate stacks satisfy the construed “electrode stack” limitation.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“(“POSITA” or “POSA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–82). Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 6–7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’562 patent and the asserted prior art, we maintain Petitioner’s definition for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“comprises the recited metals and has the recited thickness, which forms an electrical contact for use on a semiconductor device generally or a group III- V semiconductor in particular. This is consistent with our determination that “electrode stack” is a conductor that provides a path for current entering or leaving a medium such as a semiconductor device We disagree with Patent Owner that “electrode stack” as used in the challenged claims should be limited to the specific electrodes shown in the embodiments described in the Specification. See PO Resp. 4–9. Although the Specification describes embodiments using source, drain, and Schottky gate electrodes as electrical contacts, we see no reason to construe the term “electrode stack” itself to be limited to these components as Patent Owner proposes. Claims 1 and 13 expressly recite that electrode stacks comprise the claimed “electrical contact,” without expressly including or precluding any specific type of electrode. Ex. 1001, 5:54–63, 6:37–47. The Federal Circuit advises that the Specification “is not a substitute for, nor can it be used to rewrite, the chosen claim language. ‘Specifications teach. Claims claim.’” SuperGuide, 358 F.3d at 875 (quoting SRI Int’l v. Matsushita Elec. Corp. of Am., 775 F.2d 1107, 1121 n.14 (Fed. Cir. 1985) (en banc)). The Specification does teach electrical contacts that include source, drain, and Schottky gate electrodes, but claims 1 and 13 are directed to electrical contacts that are not expressly so limited. Patent Owner’s proposed construction would effectively rewrite the claim by adding limitations, which we decline to do under the guise of claim construction. See id. (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not a part of the claim.”). In view of the foregoing, we construe the claim term “electrode stack” to mean “a conductor that provides a path for current entering or leaving a medium such as a semiconductor device.”” slip op. at 17
- Expert testimonyPetitioner expert discountedDecided for patent owner
“that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In contrast, Patent Owner’s declarant Dr. Piner testifies, with evidentiary support, that interconnects (such as Usui’s interconnect metallurgy structure) and electrical contacts (such as that claimed in the ’562 patent) are not the same thing. See Ex. 2024 ¶¶ 63–70. For example, Dr. Piner explains: In other words, not all metals in a semiconductor device have the same purpose and could not be said to be interchangeable. By August 2009 it was well known to a POSA how to discern if a metal component in a transistor is an interconnect or serves as an electrical contact such as a gate contact or ohmic contact, based on the structure and functionality of the metal component. For example, interconnects are made up of metal strips and are deposited on insulators. EX-1011 (Mishra) at 216. Interconnects are low resistance conductors that can carry very high current densities. Id., 216, 217. Unlike Schottky contacts and ohmic contacts, interconnects do not provide non-linear IV response like Schottky contacts nor inject electrons and holes into semiconductors like ohmic contacts. Id., 218. As many of the references cited by Dr. Zhao illustrate, electrical contacts had their own highly complex design challenges. EX-1008 (Pearton), 41-59 (Pages 53-71 of 383) (discussing electrical contacts); EX-1017 (Kramer), 11-126 (Pages 18-130 of 151) (same). And while Dr. Zhao cites these as supporting a POSA’s knowledge of an electrical contact, none of these references describe electrical contacts as interconnects. Id. ¶ 71. Dr. Piner further testifies that Usui’s interconnect metallurgy structure is an interconnect, and not an electrical contact, because “Usui states that ‘[t]he structures fabricated by the process of the present invention are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.’” Id. ¶ 148 (citing Ex. 1004, 1:11–14) (alteration in original); see also id. ¶¶ 150– 151 (Dr. Piner testifying that Usui’s interconnect metallization structure is not an “electrode stack” under a broad definition of electrode). Dr. Piner’s testimony in this regard rebuts Petitioner’s and Dr. Zhao’s conclusory assertions to the contrary.” slip op. at 21
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“conductor that provides a path for current entering or leaving a medium such as a semiconductor device.” Thus, Petitioner must show that Usui’s layers 13–15, 18, and 19 provide a path for current entering or leaving a medium such as a semiconductor device. After reviewing the complete trial record, we are not persuaded that Petitioner has done so. Petitioner relies on the testimony of Dr. Zhao to support its contention that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential).” slip op. at 21
Patent outcomesUS 8,686,562 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,686,562 - Luxottica Of America, Inc. v. E-Vision Smart Optics, Inc.Adverse judgmentPTAB · Jun 29, 2026 · IPR2025-01512 · APJ Arthur M Peslak · IPR · Adverse judgment
The Board granted Patent Owner’s request for adverse judgment, cancelled claims 1–27, and terminated the proceeding.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“A party may request entry of adverse judgment against itself at any time during an inter partes review proceeding. See 37 C.F.R. § 42.73(b). Under these circumstances, entry of judgment adverse to the Patent Owner is appropriate as to claims 1–27 of the ’612 patent. Consequently, we grant Patent Owner's request for adverse judgment.” slip op. at 2
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
NonePatents in suitUS 11,971,612 - Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentablePTAB · Jun 12, 2026 · IPR2025-00094 · APJ Christopher M Kaiser · IPR · Final written decision
Claims 1–16 were not shown unpatentable under any asserted obviousness ground because Petitioner failed to establish the proposed modifications and combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 5 (citing Ex. 1003 ¶¶ 67–69). Petitioner also argues that “[a]dditional education could substitute for professional experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. Accordingly, and because it appears to be consistent with the ’003 patent and the asserted prior art, we adopt Petitioner’s assessment of the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Neither party proposes construing any claim terms. Pet. 6; Prelim. Resp. 1–76. In addition, as discussed below, we are able to determine the outcome of this proceeding without expressly construing any terms. Thus, we do not construe any terms for the purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“challenged claim. Unigene Labs., Inc. v. Apotex, Inc., 655 F.3d 1352, 1360 (Fed. Cir. 2011). “This is so because inventions in most, if not all, instances rely upon building blocks long since uncovered, and claimed discoveries almost of necessity will be combinations of what, in some sense, is already known.” KSR, 550 U.S. at 418–419. On the other hand, an obviousness analysis “need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.” Id. at 418; accord In re Translogic Tech., Inc., 504 F.3d 1249, 1259 (Fed. Cir. 2007). However, a petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016). Instead, a petitioner must articulate a reason why a person of ordinary skill in the art would have combined or modified the prior art references. In re NuVasive, Inc., 842 F.3d 1376, 1382 (Fed. Cir. 2016); see also Metalcraft of Mayville, Inc. v. The Toro Co., 848 F.3d 1358, 1366 (Fed. Cir. 2017) (“In determining whether there would have been a motivation to combine prior art references to arrive at the claimed invention, it is insufficient to simply conclude the combination would have been obvious without identifying any reason why a person of skill in the art would have made the combination.”); Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.”) (citing InTouch Techs., Inc. v. VGO Commc’ns, Inc., 751 F.3d 1327, 1352 (Fed. Cir. 2014)). In arguing for the obviousness of claim 1 over the combination of Bonn and Mizuta, Petitioner argues that a person of ordinary skill in the art would have modified Bonn to perform high-frequency signal amplification. Pet. 19–25. In particular, Petitioner argues that a person of ordinary skill in the art “would have found it obvious to modify the circuit of Figure 1 [of Bonn] and use Figure 7’s structure for high frequency signal amplification in place of mixer 40,” followed by additional modifications to the circuit of Figure 1. Id. at 22–25. These additional modifications include removing LO port 55, removing FET 20 (along with voltage source 80, capacitors 16, 26, and 34, resistor 18, and inductors 22 and 24), removing capacitor 34 and shorting gate structure 324 to ground, and removing resistors 46 and 48 and shorting terminal 51 to ground. Id. According to Petitioner, the motivation for these modifications was that “Bonn . . . teaches using its dual gate structures for signal amplification without signal mixing.” Id. at 22 (citing Ex. 1006, 11:26–37). On the record developed at trial, we disagree. Bonn does, as Petitioner argues, teach that “the dual gate FET structure of the present invention can be tailored to provide superior performance over the prior art dual gate FET structures in high frequency signal mixing as well as other applications such as high frequency signal amplification.” Ex. 1006, 11:33–37. But the tailoring that Bonn refers to relates to changes to the structure of the field-effect transistor itself, not to the circuitry surrounding that transistor. Id. (teaching that the reason that “the dual gate FET structure of the present invention can be tailored” is that “the parameters such as gate width, dopant concentration, and channel depth, under each gate of the dual gate FET are individually adjusted for optimum performance”). Thus, although Bonn might have motivated a person of ordinary skill in the art to have made changes to the dual-gate FET itself, we are not persuaded that it would have motivated the additional changes to the circuit of Bonn’s Figure 1.” slip op. at 11
- Strike new argumentNew argument disregardedDecided for patent owner
“Mishra’s Figure 5 is a second gate in favor of a new position. Petitioner’s new argument is that a person of ordinary skill in the art would have found it obvious to connect the field plate of Mishra’s Figure 5 to the source instead of the gate, converting the field plate into a second gate. Compare Pet. 83 (equating “drain side gate” with “field plate 66, Figure 5”), 86–88 (identifying field plate 66 as a “second gate”), with Reply 21–22 (identifying only the embodiment of Mishra’s Figure 10 as a source-connected field plate), 22–23 (arguing that Mishra teaches that the Figure 5 embodiment “could be arranged as ‘a single transistor with a dual gate structure’”). Although “the introduction of new evidence in the course of the trial is to be expected in inter partes review trial proceedings,” Genzyme Therapeutic Prods. LP v. Biomarin Pharm. Inc., 825 F.3d 1360, 1366 (Fed. Cir. 2016), the shifting of arguments is not, Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). Accordingly, Petitioner’s change of arguments here is inappropriate. Moreover, even if we were to consider Petitioner’s inappropriate new argument, we would conclude that Petitioner does not support the argument with sufficient evidence. “Whether [an obviousness ground] is based on combining disclosures from multiple references, combining multiple embodiments from a single reference, or selecting from large lists of elements in a single reference, there must be a motivation to make the combination and a reasonable expectation that such a combination would be successful, otherwise a skilled artisan would not arrive at the claimed combination.” In re Stepan, 868 F.3d 1342, 1346 n.1 (Fed. Cir. 2017). Petitioner’s new argument relies on a person of ordinary skill in the art modifying the Figure 5 embodiment of Mishra to connect the field plate to the source rather than the gate. Reply 21–24. Petitioner does not, however, show that a person of ordinary skill in the art would have had a motivation to make this modification or a reasonable expectation that this combination would be successful. Id. Petitioner argues instead that “[n]o ‘reason’ is needed.” Id. at 24. Thus, Petitioner does not show by a preponderance of the evidence that claim 1 would have been obvious over the combination of Mishra and Ren.” slip op. at 19
Patent outcomesUS 8,264,003 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,264,003 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentablePTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision
The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9
- BurdenNot shown unpatentable
“There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21
- Obviousness (§103) › Analogous artAnalogous artOther
“On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19
Patent outcomesUS 9,421,713 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,421,713 - Dr. Falk Pharma GmbH v. Ellodi Pharmaceuticals, L.P.Adverse judgmentPTAB · Jun 3, 2026 · PGR2025-00086 · APJ Tawen Chang · PGR · Adverse judgment
The Board granted Patent Owner’s request for adverse judgment and terminated the PGR as to claims 1–34 after Patent Owner disclaimed all challenged claims.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“A party may request judgment against itself at any time during a proceeding,” including by “[d]isclaimer of the involved application or patent” or “[c]ancellation or disclaimer of a claim such that the party has no remaining claim in the trial.” 37 C.F.R. §§ 42.73(b)(1)–(b)(2). Accordingly, we grant Patent Owner’s Request for Adverse Judgment and terminate the proceeding. slip op. at 2
NonePatents in suitUS 12,290,598 - Ascend Elements, Inc. v. Duesenfeld GmbHInstitution deniedPTAB · Oct 10, 2025 · PGR2025-00037 · APJ Kevin W Cherry · PGR · Institution
The Board denied institution of PGR on claims 1–14 because Petitioner did not show that any challenged claim was more likely than not unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“information presented in the petition filed under [35 U.S.C. §] 321 . . . demonstrates that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). For the reasons set forth below, we determine that Petitioner has failed to demonstrate that it is more likely than not that at least one of claims 1–14 of the ’463 patent is unpatentable. Accordingly, we deny institution of a postgrant review of claims 1–14 based on the grounds set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have had at least a Bachelor’s degree in electrical engineering, material science, chemical engineering, or an equivalent field, as well as at least 2 to 3 years of academic or industry experience in the recycling or processing of lithiumion batteries. Additional formal education focusing on processing of lithium batteries may substitute for practical experience and additional practical experience can substitute for less education.” Pet. 10–11. Patent Owner does not contest this definition of a person of skill in the art. See Prelim. Resp. 11. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as, on the present record, it appears consistent with the ’463 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner
“distinct from “comminute[ion],” Petitioner offers only the testimony of its expert, Mr. Juzkow, who equates Tomioka’s “cutting” with “comminute[ion].” See Ex. 1003 ¶ 121. However, Mr. Juzkow provides insufficient reasoning to support his conclusion, particularly given the intrinsic and extrinsic evidence discussed above. In contrast, Patent Owner’s expert, Mr. Dantam, provides extensive reasoning, supported by citations to other evidence, to support his conclusion that Tomioka’s “dismantling” is not the claimed “comminution.” Thus, we give more weight to Mr. Dantam’s testimony than Mr. Juzkow’s testimony. Weighing this evidence all together, we find that Petitioner has failed to show that it is more likely than not that Tomioka’s teaches the claimed comminution under Petitioner’s first theory.” slip op. at 15
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundTeaching away not foundNot shown unpatentable
“obvious. Pet. 34–35. However, we agree with Patent Owner that Petitioner has also failed to show that it is more likely than not that Tomioka renders this limitation obvious. See Prelim. Resp. 28–31. To begin with, Petitioner’s contentions lack sufficient reasoning explaining why a person of ordinary skill would have modified Tomioka in the manner proposed. “[R]ejections on obviousness grounds cannot be sustained by mere conclusory statements; instead, there must be some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006). Petitioner merely asserts that a person of ordinary skill in the art could use the roller system in place of the dismantling disclosed for the embodiments in Figures 19 and 20. On this record, we find this bare contention insufficient. actual disclosure of Tomioka. The rollers in Tomioka are used to separate the “battery body” from the “resin package enclosing the battery body,” and Tomioka specifically discloses that this technique is designed to “avoid damaging the battery body.” Ex. 1005 ¶¶ 25, 26, 29; Ex. 2011 ¶¶ 72–73. Thus, there is a significant difference between what Tomioka teaches and what Petitioner proposes to use the roller system to do. In addition, as Patent Owner points out, Tomioka specifically discloses there are risks associated with mechanically crushing battery packs, such as “risk of sparking due to residual voltage if the battery units are damaged in the process.” Ex. 1005 ¶ 5. Although we do not agree with Patent Owner that this amounts to a “teaching away,” see In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994), we do believe that this teaching suggests a trade off that should be weighed in determining whether to make the modification, see Medichem S.A. v. Rolabo S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006). However, Petitioner has failed to account adequately, if at all, for this trade off. Thus, we find that Petitioner has failed to show that it is more likely than not that Tomioka accounts for the claimed “comminuting.”” slip op. at 15
§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 12,119,463 - Commscope Technologies LLC v. Belden Canada UlcAdverse judgmentPTAB · Sep 8, 2025 · IPR2024-01382 · APJ Kimberly Mcgraw · IPR · Adverse judgment
The Board granted Patent Owner’s withdrawal of its motion to amend and entered adverse judgment against all challenged claims after their statutory disclaimer, terminating the IPR.
RulingsAdverse judgment- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted
“In view of the facts presented, including that no decision as to the patentability of the proposed substitute claims has yet been made and Petitioner does not oppose the withdrawal, we grant Patent Owner’s Motion to Withdraw its Motion to Amend.” slip op. at 2
- Adverse judgmentAdverse judgmentGranted
“Under our rules, a party may request adverse judgment against itself at any time during a proceeding, including by disclaiming all claims involved in a trial. 37 C.F.R. §42.73(b). Because Patent Owner’s request to withdraw its Motion to Amend has been granted and Patent Owner has disclaimed all Challenged Claims such that no claims remain in the trial, we grant Patent Owner’s Motion to Terminate by Adverse Judgment.” slip op. at 3
NonePatents in suitUS 11,740,423 - Commscope Technologies LLC v. Belden Canada UlcAdverse judgmentPTAB · Sep 8, 2025 · IPR2024-01228 · APJ Kimberly Mcgraw · IPR · Adverse judgment
The Board granted Patent Owner’s withdrawal of its motion to amend and entered adverse judgment on the disclaimed challenged claims, terminating the IPR.
RulingsAdverse judgment- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted
“In view of the facts presented, including that no decision as to the patentability of the proposed substitute claims has yet been made and Petitioner does not oppose the withdrawal, we grant Patent Owner’s Motion to Withdraw its Motion to Amend.” slip op. at 2
- Adverse judgmentAdverse judgmentGranted
“Under our rules, a party may request adverse judgment against itself at any time during a proceeding, including by disclaiming all claims involved in a trial. 37 C.F.R. §42.73(b). Because Patent Owner’s request to withdraw its Motion to Amend has been granted and Patent Owner has disclaimed all Challenged Claims such that no claims remain in the trial, we grant Patent Owner’s Motion to Terminate by Adverse Judgment.” slip op. at 3
NonePatents in suitUS 11,656,422 - Commscope Technologies LLC v. Belden Canada UlcAdverse judgmentPTAB · Sep 8, 2025 · IPR2024-01227 · APJ Christopher M Kaiser · IPR · Adverse judgment
The Board granted Patent Owner’s withdrawal of its motion to amend and entered adverse judgment after it disclaimed challenged claims 1–5 and 8–13, terminating the IPR.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“Under our rules, a party may request adverse judgment against itself at any time during a proceeding, including by disclaiming all claims involved in a trial. 37 C.F.R. §42.73(b). Because Patent Owner’s request to withdraw its Motion to Amend has been granted and Patent Owner has disclaimed all Challenged Claims such that no claims remain in the trial, we grant Patent Owner’s Motion to Terminate by Adverse Judgment.” slip op. at 3
- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted
“In view of the facts presented, including that no decision as to the patentability of the proposed substitute claims has yet been made and Petitioner does not oppose the withdrawal, we grant Patent Owner’s Motion to Withdraw its Motion to Amend.” slip op. at 2
NonePatents in suitUS 11,435,542 - Commscope Technologies LLC v. Belden Canada UlcAdverse judgmentPTAB · Sep 8, 2025 · IPR2024-01218 · APJ Kimberly Mcgraw · IPR · Adverse judgment
The Board granted Patent Owner’s request for adverse judgment after it disclaimed challenged claims 1–5 and 8–13, terminating the inter partes review.
RulingsAdverse judgment- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted
“In view of the facts presented, including that no decision as to the patentability of the proposed substitute claims has yet been made and Petitioner does not oppose the withdrawal, we grant Patent Owner’s Motion to Withdraw its Motion to Amend.” slip op. at 2
- Adverse judgmentAdverse judgmentGranted
“Under our rules, a party may request adverse judgment against itself at any time during a proceeding, including by disclaiming all claims involved in a trial. 37 C.F.R. §42.73(b). Because Patent Owner’s request to withdraw its Motion to Amend has been granted and Patent Owner has disclaimed all Challenged Claims such that no claims remain in the trial, we grant Patent Owner’s Motion to Terminate by Adverse Judgment.” slip op. at 3
NonePatents in suitUS 10,795,107
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.