- Luxottica Of America, Inc. v. E-Vision Smart Optics, Inc.Adverse judgmentPTAB · Jun 29, 2026 · IPR2025-01512 · APJ Arthur M Peslak · IPR · Adverse judgment
The Board granted Patent Owner’s request for adverse judgment, cancelled claims 1–27, and terminated the proceeding.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“A party may request entry of adverse judgment against itself at any time during an inter partes review proceeding. See 37 C.F.R. § 42.73(b). Under these circumstances, entry of judgment adverse to the Patent Owner is appropriate as to claims 1–27 of the ’612 patent. Consequently, we grant Patent Owner's request for adverse judgment.” slip op. at 2
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
NonePatents in suitUS 11,971,612 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentablePTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision
The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9
- BurdenNot shown unpatentable
“There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21
- Obviousness (§103) › Analogous artAnalogous artOther
“On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19
Patent outcomesUS 9,421,713 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,421,713 - Dr. Squatch, LLC v. The Procter & Gamble CompanyAll claims unpatentablePTAB · Jan 28, 2026 · IPR2024-01173 · APJ Susan L C Mitchell · IPR · Final written decision
Claims 1–7, 9–13, and 16–19 are unpatentable: claims 16–17 are anticipated by Lesniak, and the remaining challenged claims are obvious over the stated combinations.
RulingsFinal written decision- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“argument that the Lesniak fails to enable a stable deodorant stick. Rather, we are persuaded by Petitioner that Lesniak sufficiently teaches compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Pet. Reply 8 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a second wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Ex. 1086 ¶ 7; see also Reply 8 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32).” slip op. at 22
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Level of Ordinary Skill in the Art Petitioner proposes that a person of ordinary skill in the art (“POSA” or “POSITA”) at the time of the invention “would have (1) at least a B.S. or equivalent degree; and (2) at least two years of experience in cosmetics formulations.” Pet. 24 (citing Ex. 1002 ¶¶ 27–28). Patent Owner does not dispute Petitioner’s proposal about the POSA’s qualifications. See generally PO Resp. We adopt and apply Petitioner’s proposed definition of a POSA, which is consistent with the level of skill reflected in the asserted prior art.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner
“Patent Owner asserts that the preamble of independent claim 1 reciting “a deodorant stick” is limiting” as it provides antecedent basis for certain other claim elements, specifically, for the recitation of “said deodorant stick being free of an aluminum salt” and “said deodorant stick” having a particular hardness range. PO Resp. 8–9. Patent Owner also points to dependent claims 5–8 as relying on the preamble reciting “a deodorant stick” as antecedent basis for claim elements. Id. at 10. We agree.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“We find that the evidence of record fails to support Patent Owner’s argument that the Lesniak fails to enable a stable deodorant stick. Rather, we are persuaded by Petitioner that Lesniak sufficiently teaches compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Pet. Reply 8 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a second wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Ex. 1086 ¶ 7; see also Reply 8 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32). Having considered the parties’ positions and evidence of record, summarized above, we determine that Lesniak provides sufficient disclosure to enable a person of ordinary skill in the art to formulate a deodorant stick within the parameters of claims 16 and 17. e) Conclusion as to Claims 16 and 17 We agree with Petitioner that “the challenged claims recite nothing more than well-known deodorant ingredients performing their conventional functions.” Pet. Reply 2. Therefore, for the reasons discussed above, we conclude that Petitioner has proved by a preponderance of evidence that Lesniak anticipates claims 16 and 17.” slip op. at 22
Patent outcomesUS 10,905,647 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,905,647 - PTAB · Dec 12, 2025 · IPR2025-01116 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted IPR of claims 1–15 on all asserted grounds, finding a reasonable likelihood that claim 1 would have been obvious over Sudre, Lee, and Penven.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“determine whether to institute an inter partes review under 35 U.S.C. § 314 and 37 C.F.R. § 42.4(a). Inter partes review may not be instituted unless “the information presented in the petition filed under [35 U.S.C.] section 311 and any response filed under [35 U.S.C.] section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). “When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2023). In other words, a decision to institute under § 314 may not institute on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018). In addition, if the Board institutes trial, it will “institute . . . on all grounds in the petition.” PTAB Consolidated Trial Practice Guide, 5–6 (Nov. 2019)1 (“CTPG”); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had at least (1) a Bachelor’s Degree (or higher) in material science, materials engineering, mechanical engineering, textile engineering, or a related field, and (2) a minimum of two years of working experience in textiles engineering, fibers and textiles manufacturing, or a related field.” Pet. 4 (citing Ex. 1003 ¶¶ 21–22). Petitioner also argues that “[a]dditional education could substitute for professional experience, and vice versa.” Id. On the present record, Patent Owner does not contest Petitioner’s proposed level of ordinary skill. Prelim. Resp. 25–26. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’566 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Both parties argue that no claim terms require express construction at this stage of the proceeding. Pet. 3; Prelim. Resp. 26. On the present record, we agree. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). To the extent the parties’ arguments regarding unpatentability do address claim construction issues, we address these issues below.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“articulated a reason why a person of ordinary skill in the art would have combined the teachings of Sudre, Lee, and Penven. Prelim. Resp. 60–63. In particular, Patent Owner argues that a person of ordinary skill in the art “would not have been motivated to look into Penven to modify the teachings of Lee because Lee and Penven disclose substantially different structures.” Id. at 60–61. This argument does not address Petitioner’s proposed reason to combine, which looks to Lee and Penven each to modify Sudre, not to Penven to modify Lee. See Pet. 79–81. In addition, “[c]ombining the teachings of references does not involve an ability to combine their specific structures.” In re Nievelt, 482 F.2d 965, 968 (CCPA 1973). In other words, “[t]he test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference . . . . Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art.” In re Keller, 642 F.2d 413, 425–26 (CCPA 1981). Petitioner provides “some articulated reasoning with some rational underpinning” to combine the teachings of Sudre with those of Lee and Penven. KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007). In particular, Petitioner directs us to Sudre’s teaching of “a method for manufacturing PMC,” to Sudre’s lack of teaching of “specific parameters, such as warp thread size and spacing” to satisfy the “particular requirements” of its fabric. Pet. 79 (citing Ex. 1003 ¶¶ 248–250; Ex. 1004, 1:2–5, 6:14–17). As Petitioner points out, id. at 79–80, Lee and Penven provided yarn diameters and loop diameters that were conventional, and there is evidence of record that a person of ordinary skill in the art would have used these conventional diameters in constructing Sudre’s paper machine clothing. Ex. 1003 ¶¶ 258–261, 263–266; Ex. 1006, 3:64–66.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,261,566 - PTAB · Nov 10, 2025 · IPR2025-00878 · APJ Carl M Defranco · IPR · Institution
The Board instituted review of claims 1–3 and 11 after finding a reasonable likelihood that claim 1 is anticipated by Cleveland or obvious over Nakagawa.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“contentions, the cited portions of Cleveland, and the testimony of Clearwater’s expert), we find, preliminarily, that Cleveland discloses each claim element in the manner recited by claim 1. Thus, on the current record, Clearwater demonstrates a reasonable likelihood that challenged claim 1 is unpatentable as anticipated by Cleveland.” slip op. at 6
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference is prior artDecided for petitioner
“5 Clearwater argues that Cleveland qualifies as prior art under 35 U.S.C. § 102(e)(1) “based on both its provisional and non-provisional filing dates.” Pet. 17. In support, Clearwater asserts that Cleveland’s provisional (Ex. 1006) is “virtually identical” to Cleveland itself (id. at 18) and submits claim charts to demonstrate that the Cleveland provisional provides written support for: (1) at least claim 1 of Cleveland (id. at 18–21); and (2) the subject matter relied upon in Cleveland (id. at 21–40 (citing Ex. 1006 throughout)). Based on our review of the Cleveland provisional, as well as Clearwater’s claim charts, we are persuaded that the current record demonstrates that Cleveland is prior art to the challenged patent. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1381 (Fed. Cir. 2015).” slip op. at 4
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“satisfies each claim element as identified above in Section I.D, i.e., elements [1.pre]–[1.6]. See id. at 22–40. Clearwater also submits annotated Figure 3 of Cleveland, reproduced below, to further illustrate the specific laminate structure of Cleveland’s coffee cup. See id. at 39.” slip op. at 5
- Obviousness (§103) › Motivation to combine / reasonable expectation of successInstituted
“protective layers have “a coat weight of from 5 to 30 lbs/3000 ft2,” Clearwater submits the declaration of its expert, who explains that, because Nakagawa identifies the specific polymers and the thickness of the coat used for the plastic layers and one skilled in the art “would recognize that the disclosed polymers have a given density,” then “[w]ith these known parameters, the coat weight is easily calculated to be 23.04 lbs./ 3000 ft2 — falling squarely within the claimed range.” Pet. 53–54 (citing Ex. 1003 ¶¶ 132–133; Ex. 1008 ¶ 24; Ex. 1024, at 4). At this stage, we find that testimony credible and supported by the evidence presently of record. After reviewing the preliminary record (including Clearwater’s contentions, the cited portions of Nakagawa, and the testimony of Clearwater’s expert), we find, preliminarily, that Nakagawa discloses or otherwise suggests each claim element in the manner recited by claim 1. Thus, on the current record, Clearwater demonstrates a reasonable likelihood that challenged claim 1 is unpatentable as obvious over Nakagawa. We need not decide Clearwater’s challenge of the dependent claims based on Nakagawa alone nor its challenge of claims 1–3 based on Nakagawa and Tanner. Our analysis of these challenges, in our view, is best left for trial after full development of the record.” slip op. at 8
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 8,637,126 - Luminex International Co., Ltd. / Menard, Inc. v. Signify Holdings B.V.Some claims unpatentablePTAB · Aug 13, 2025 · IPR2024-00101 · APJ Steven M Amundson · IPR · Final written decision
Claims 1–7, 9–15, and 18–20 are unpatentable; claims 8, 16, and 17 are not shown unpatentable under the asserted grounds.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for patent ownerDecided for patent owner
“G. Analysis 1. REAL PARTY IN INTEREST Based on the record before us and for the reasons explained below, we” slip op. at 32
- PTAB / AIA Trials › §315(b) time barDecided for patent owner
“III. WHETHER THE PETITION IS TIME BARRED The parties dispute whether the Petition is time barred based on a” slip op. at 18
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“vacated the panel’s decision denying institution. Paper 12, 6. Among other things, the Director determined based on a “review of the current record” that (1) Menard is not a real party in interest in this proceeding and (2) Menard is not a privy of Petitioner. Id. at 5. Further, the Director remanded the case to the panel and instructed the panel “to determine whether the Petition presents a reasonable likelihood of prevailing with respect to at least one of the challenged claims under 35 U.S.C. § 314(a), and to determine whether to institute inter partes review accordingly.” Id. at 5–6.” slip op. at 3
- BurdenMixed
“U.S. Patent No. 10,299,336 B2 (“the ’336 patent”) (Exhibit 1001). For the reasons explained below, a preponderance of the evidence shows that claims 1–7, 9–15, and 18–20 in the ’336 patent are unpatentable and does not show that claims 8, 16, and 17 are unpatentable. See 35 U.S.C. § 316(e) (2024).” slip op. at 2
Patent outcomesUS 10,299,336 mixed§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,299,336 - PTAB · Jul 10, 2025 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board instituted review of claims 1–17 on all asserted grounds, finding a reasonable likelihood of unpatentability on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2023). For the reasons discussed below, we determine that Petitioner establishes a reasonable likelihood of prevailing with respect to the patentability of at least one claim of the ’562 patent. Accordingly, we institute an inter partes review of claims 1–17 of the ’562 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“(“POSITA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Neither party proposes any explicit construction of any term. See Pet. 7 (“For the purposes of this IPR, the plain meaning of each term can be applied.”). We do not expressly construe any term for purposes of this Decision.” slip op. at 7
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“On this record, we are persuaded that Petitioner adequately establishes that Usui discloses all of the limitations of claim 1. Usui discloses that aluminum or aluminum alloy layer 15 is in electrical contact with titanium underlayer 13, and titanium nitride layer 14 is located “intermediate the [titanium underlayer] 13 and the aluminum or aluminum alloy layer 15” to prevent “reaction between the aluminum layer 15 and underlayer 13.” Ex. 1004, 3:27–29, 3:38–41, 3:58–63. Usui further discloses that “a capping layer is provided above layer 15,” and that “[p]referred capping layers are titanium nitride and combinations of as layer 18 of a group IVA metal, preferably titanium with a titanium nitride layer 19.” Id. at 3:67–4:6. Usui teaches that titanium nitride layer 19 is about 150 to 800 Å thick, and that the thickness of titanium underlayer 13 is between about 90 to 110 Å. Id. at 3:31–33, 4:6–8. Usui also teaches that the interconnect metallurgy structures described therein “exhibit[] enhanced electromigration characteristics” and “are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.” Id. at 1:8–14. Usui’s description of a plurality of metal layers (layers 13–18) and a capping layer formed over the plurality of metal layers (layer 19), along with its description of the structure’s usefulness for forming electrical connections in an integrated circuit structure, is sufficient, on this record, to establish that Usui discloses “an electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. Usui’s teaching that the capping layer is a refractory metal nitride (titanium nitride) that has a thickness (150–800 Å) greater than the bottommost layer of the plurality of metal layers (layer 13, 90–110 Å), sufficiently establishes, on this record, that Usui discloses the “said capping layer consisting only of a refractory metal nitride, said refractory metal nitride forming a top of said electrical contact and having a thickness greater than that of a bottommost layer of said plurality of metal layers” limitation of claim 1.” slip op. at 11
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 8,686,562 - PTAB · Jul 9, 2025 · IPR2025-00094 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted IPR on claims 1–16 and all asserted grounds, finding a reasonable likelihood that claim 1 is obvious over Bonn and Mizuta.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this preliminary stage, we determine whether the information presented shows a reasonable likelihood that Petitioner would prevail in establishing that at least one of the challenged claims would have been unpatentable over the proposed prior art. We analyze the asserted grounds with the above-noted principles in mind.” slip op. at 7
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 5 (citing Ex. 1003 ¶¶ 67–69). Petitioner also argues that “[a]dditional education could substitute for professional experience and vice versa.” Id. On the present record, Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. Prelim. Resp. 1–52. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears to be consistent with the ’003 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We apply the same claim-construction standard used in the federal courts—in other words, the claim-construction standard that would be used to construe the claim in a civil action under 35 U.S.C. § 282(b), which is articulated in Phillips. See 37 C.F.R. § 42.100(b). Under the Phillips standard, the “words of a claim ‘are generally given their ordinary and customary meaning,’” which “is the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention, i.e., as of the effective filing date of the patent application.” Phillips, 415 F.3d at 1312–13. Neither party proposes construing any claim terms. Pet. 6; Prelim. Resp. 1–52. On the present record, we agree. As discussed below, we are able to determine whether to institute inter partes review of the ’003 patent without expressly construing any terms. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Patent Owner argues that Petitioner does not show sufficiently that a person of ordinary skill in the art would have had a reason to modify Bonn to remove local oscillator 55. Prelim. Resp. 13–15. We disagree. Petitioner argues that, “[i]n addition to using Figure 7’s ‘dual gate FET structure in high frequency signal mixing’ applications . . . , Bonn discloses using this dual gate FET in ‘other applications such as high frequency signal amplification.’” Pet. 22 (quoting Ex. 1006, 11:26–37). Indeed, Bonn does suggest using its structure for signal amplification. Ex. 1006, 11:26–37 (“the dual gate FET structure of the present invention can be tailored to provide superior performance . . . in . . . other applications such as high frequency signal amplification”). On the present record, this appears to have provided the motivation for a person of ordinary skill in the art to use Bonn for amplification instead of for signal mixing. Petitioner relies on the testimony of Dr. Bernstein to show the modifications that a person of ordinary skill in the art would have considered necessary in order to convert Bonn’s structure for signal-amplification use. Pet. 23–25 (citing Ex. 1003 ¶¶ 98–109). In particular, Petitioner cites Dr. Bernstein’s testimony that a person of ordinary skill in the art “would have found it obvious to remove Figure 1’s LO (local oscillator) port 55 and its associated impedance matching components because the LO signal is no longer being mixed.” Ex. 1003 ¶ 98; see Pet. 23. Dr. Bernstein supports this testimony with citations to Bonn and with reasoning regarding why a person of ordinary skill in the art would have made this modification. Ex. 1003 ¶ 98 (citing Ex. 1006, 1:20–23, 3:19–21, 3:30–41). Accordingly, on the present record, we are persuaded that Petitioner has shown sufficiently that a person of ordinary skill in the art would have had reason to modify Bonn’s structure to remove the connection between a local oscillator and the gate of the second transistor. Finally, Patent Owner argues that Petitioner’s proposed modification would have rendered Bonn inoperable for its intended purpose because the modification would eliminate the ability of Bonn’s structure to conduct high frequency signal mixing. Prelim. Resp. 26–27. As Patent Owner notes, one purpose of Bonn is to mix high-frequency signals. Ex. 1006, 11:33–36. But Bonn itself teaches using its structure for “other applications,” including “high frequency signal amplification.” Id. at 11:33–37. Thus, on the present record, we are persuaded that Petitioner’s proposed modification does not render Bonn inoperable for its intended purpose so much as it acknowledges the modifications necessary to convert Bonn from one of its intended purposes to another. Thus, Petitioner has shown sufficiently for the purpose of the present Decision that a person of ordinary skill in the art would have had reason to combine Bonn and Mizuta and that the combination of Bonn and Mizuta teaches or suggests the disputed limitation of claim 1. We encourage the parties to develop the arguments and the record surrounding this issue further during the trial.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,264,003 - Apple Inc. v. THL Holding Company, LLCAll claims unpatentablePTAB · Jul 3, 2025 · IPR2024-00399 · APJ Christopher M Kaiser · IPR · Final written decision
Claims 11–19 are unpatentable as obvious: claims 11–14 over Kalliola, Turunen, Oswald, Vauclair, and Kalayjian; claims 15–18 with Thorn; and claim 19 with Thorn and Sharp.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that the level of ordinary skill in the art corresponds to “a bachelor’s degree in computer science, computer engineering, electrical engineering, or a similar technical field and 2-4 years of experience with wireless ranging and positioning systems, wireless communication devices, and associated computer programming.” Pet. 4 (citing Ex. 1003 ¶ 35). “Patent Owner agrees that this description reasonably represents the level of ordinary skill required to understand and implement the teachings of the ’246 Patent, as well as the prior art cited in the Petition.” PO Resp. 14 (citing Ex. 2002 ¶ 22). Accordingly, we adopt Petitioner’s proposed level of skill.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“device.” This term appears twice in claim 11, once in the phrase “an orientation sensor to detect rotation of the mobile communication device,” and once in the phrase “rotation of the mobile communication device detected by the orientation sensor.” Ex. 1001, 39:13–14, 39:36–38. Patent Owner argues that we should construe this term as limited to “detecting the rotation of the mobile communication device as a whole, not the movement of individual components.” PO Resp. 15–18. Petitioner disputes this, arguing that “rotation of the mobile communication device” should be construed not only to cover rotation of the device as a whole but also should “encompass[] any rotation of the mobile communication device relative to any object, including itself,” which would extend to rotation of “any component of the device.” Reply 4–5. We need not resolve this dispute to determine the outcome of Petitioner’s asserted challenges to the ’246 patent. As discussed more fully below, under either party’s proposed construction of “rotation of the mobile communication device,” Petitioner has shown by a preponderance of the evidence that the challenged claims are unpatentable. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Expert testimonyOther
“On the record developed during trial, we are persuaded that Petitioner has shown by a preponderance of the evidence that Kalliola teaches “an orientation sensor to detect rotation of the mobile communication device,” where “rotation of the mobile communication device” includes rotation of the device as a whole, regardless of whether it also includes rotation of one portion of the device relative to another. Kalliola teaches “motion sensors integrated in WCD 100” that are “used to detect when WCD 100 is being moved,” as well as to detect “when user 110 moves WCD 100 too quickly for an accurate DoA estimation.” Ex. 1004 ¶¶ 84, 86. Although Patent Owner argues that Kalliola’s motion sensors do not detect rotation of the device, this is incorrect on the record as developed at trial. Kalliola teaches that the motion sensor may take “the form of a semiconductor gyroscope chip.” Id. ¶ 84. There is ample evidence that gyroscopes detect rotation. Ex. 1013, 38 (identifying as an “orientation sensor” a “[t]hree-axis gyro” and a “[d]ynamic [h]igh [r]ange [gyro]”); Ex. 1046, 49:18–20 (Dr. Feuerstein testifying that gyroscopes “can be used to detect angular velocity”); Ex. 1047 ¶ 47 (citing Ex. 1051, 170; Ex. 1053, 9) (Dr. Buehrer testifying that a person of ordinary skill in the art “would understand that gyroscopes are well-known inertial sensors that specifically detect rotational motion”). Thus, by a preponderance of the evidence, Petitioner has shown that Kalliola teaches the “orientation sensor to detect rotation of the mobile communication device” of this limitation.” slip op. at 17
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“whether Kalliola’s teaching of pausing and resuming its DoA estimation based on detected rotational motion, or Kalliola’s teaching of speeding up its DoA estimation based on detected rotational motion, amounts to determining direction based on rotation. Pet. 63–64; PO Resp. 25–27; Reply 24–27; Sur-Reply 11–14. On the record developed during trial, we are persuaded that the preponderance of the evidence supports a finding that Kalliola teaches determining direction based on rotation. First, Kalliola discloses “pausing a DoA estimation until the motion of the WCD is detected by the motion sensors,” then resuming “the updating of the DoA estimation” when motion is detected. Ex. 1004 ¶¶ 14, 84. Second, Kalliola discloses a “correction or compensation mode” that is “employed when user 110 moves WCD 100 too quickly for an accurate DoA estimation,” with this “increase[d] speed of the DoA estimation” being triggered by the “[i]ncreased activity detected by motion sensors in WCD 100.” Id. ¶ 86. As discussed above with respect to limitation 11(d), the detected motion that triggers either of these modes can be rotational motion of the WCD detected by a gyroscope.” slip op. at 22
Patent outcomesUS 11,350,246 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,350,246 - PTAB · Jun 25, 2025 · IPR2024-01406 · APJ Jo-Anne M Kokoski · IPR · Remand
On remand, the Board denied institution of review of claims 1, 3, 4, 8–13, and 15 under § 314(a), finding the Fintiv factors favored discretionary denial.
RulingsRemand decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“stay or evidence exists that one may be granted if a proceeding is instituted.” Fintiv, Paper 11 at 6. A stay of litigation pending resolution of an inter partes review allays concerns about inefficiency and duplication of efforts, and strongly weighs against exercising our authority to deny institution. Fintiv, Paper 11 at 6. The Guidance Memo states that “the Board will apply the Fintiv factors when there is a parallel proceedings at the International Trade Commission.” Guidance Memo 2. Patent Owner asserts that a stay of the ITC Investigation had not been requested at the time of the Institution Decision,7 and argues that “the ITC does not stay investigations pending IPR.” PO Supp. Br. 4. Patent Owner also notes that the Institution Decision issued “just days before the ITC evidentiary hearing.” Id. Accordingly, Patent Owner argues that this factor favors denial. Id. Patent Owner is likely correct that the ITC would not have been inclined to grant a stay if one had been requested at the time the Institution Decision issued. Moreover, the ITC conducted a full evidentiary hearing less than three weeks after the Institution Decision issued, and the target date for the ITC’s final determination is four months before the statutory deadline for the Board’s final written decision. PO Supp. Br. 5. Accordingly, we” slip op. at 9
Discretionary denialPatents in suitUS 11,925,202
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.