• Abbott Laboratories v. Miracor Medical SANo claims unpatentable
  PTAB · Jun 11, 2026 · IPR2025-00116 · APJ John D Hamann · IPR · Final written decision

  The Board held claims 1–5, 7, 10, 16–24, 26, and 28 not unpatentable under any of the four § 103 grounds because the petition failed to prove required limitations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We find that the ’077 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of skill reflected in these references and in the ’077 patent is consistent with the definition of one of ordinary skill in the art proposed by Petitioner, which we adopt. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We further find that our determinations in this Decision would be the same if we were to instead adopt the level of skill proposed by Patent Owner.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We agree with Patent Owner that “axially adjacent” should be given its plain and ordinary meaning of “adjacent to one another as measured along a central axis.” PO Resp. 5–6; see also Ex. 2015 ¶¶ 73–79 (Mr. Leschinsky addressing the claim term “axially adjacent” and explaining that a person of ordinary skill would have understood it to mean that the “first magnetic device and the rotor are ‘adjacent’ to one another, i.e., disposed next to one another, as measured along the central axis about which the rotor spins”). Patent Owner’s construction also is supported by Petitioner’s expert, Mr. Crosby, who agrees that “adjacent to one another as measured along a central axis,” could be “one meaning,” along with “many other meanings.” Ex. 2014,8 19:13–20:11. In sum, consistent with our Institution Decision, we conclude that the plain and ordinary meaning of “axially adjacent” is “at a position adjacent to one another as measured along a central axis.” See Dec. on Inst. 12.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Second, for the reasons below, we determine that we do not need to construe any other claim terms to resolve the disputes between the parties. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (“[W]e need only construe” slip op. at 14

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We agree with Patent Owner. As we discuss above, we find “axially adjacent” to mean “adjacent to one another as measured along a central arguments that rest on Petitioner’s assertion that in the Parallel Litigation, Patent Owner “asserts that a magnetic element sealed within a rotor is . . . ‘axially adjacent.’” Id. at 20–21, n.6 (citing Ex. 1019, 5–7). In particular, we find unavailing Petitioner’s argument that Wampler teaches that magnetic pieces 88 (“a first magnetic device”) “are inserted [‘axially adjacent’] in…the impeller.” Id. at 20–21 (citing Ex. 1008 ¶ 80, Fig. 13; Ex. 1003 ¶ 174). We also find unavailing Petitioner’s reliance on Wampler’s Figure 13 and Mr. Crosby’s cited testimony that “the ‘impeller’ and ‘magnetic pieces’ are axially adjacent—situated next to each other on the same axis.” Id. at 21–22 (annotating Ex. 1008, Fig. 13; citing Ex. 1003 ¶¶ 174–176). Petitioner does not sufficiently explain this argument, but appears to conflate being adjacent along a central axis with about an axis. Id. We also find unavailing Petitioner’s argument that under Patent Owner’s construction, Wampler also teaches this limitation, because Patent Owner “concedes that ‘axially adjacent’ components ‘have positioning that is next to one another, perhaps touching or sharing a common side, when measured along the axis.’” Pet. Reply 14–15 (citing PO Resp. 14). Petitioner mischaracterizes Patent Owner’s arguments and ignores Patent Owner’s showing that “axially adjacent” components are “distinct from components that are aligned with one another such that they overlap or occupy the same portion of an axis upon which they are positioned.” PO Resp. 14 (citing Ex. 2015 ¶ 78). For the preceding reasons, Petitioner fails to show by a” slip op. at 24

  Patent outcomesUS 11,754,077 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,754,077
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

  The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

  • BurdenNot shown unpatentable

    “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artOther

    “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

  Patent outcomesUS 9,421,713 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,421,713
• Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1No claims unpatentable
  PTAB · Apr 28, 2026 · IPR2024-01494 · APJ Justin T Arbes · IPR · Final written decision

  The Board found claims 5, 6, and 9–20 not shown unpatentable over either Bowen and Soukup or Nagahama and Soukup under § 103.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner argues that at the time of the ’909 patent (2004), a person of ordinary skill in the art would have had “a Ph.D. in electrical engineering, physics, materials science, or a related field, and at least one year of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” or “a Master’s degree in electrical engineering, physics, materials science, or a related field, and four years of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” where “[l]ess work experience may be compensated by a higher level of relevant education, and vice versa.” Pet. 18–19. In the Decision on Institution, we agreed with and applied Petitioner’s proposed definition. Dec. on Inst. 9. Patent Owner does not propose a different level of ordinary skill in the art in its Response. Both experts utilized Petitioner’s proposed definition. See Ex. 1024 ¶ 25; Ex. 2053 ¶¶ 29–30. Based on the full record developed during trial, including our review of the ’909 patent and the types of problems and solutions described in the ’909 patent and cited prior art, we maintain the previously adopted definition of the level of ordinary skill in the art and apply it for purposes of this Decision.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “B. Claim Interpretation We interpret the claims of the challenged patent using the same claim construction standard that would be used to construe the [claims] in a civil action under 35 U.S.C. 282(b), including construing the [claims] in accordance with the ordinary and customary meaning of such [claims] as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent. 37 C.F.R. § 42.100(b). Petitioner argues that “the claim terms should be given their plain and ordinary meaning and no claim construction is necessary.” Pet. 15. We did not interpret any terms in the Decision on Institution. Dec. on Inst. 9–10. Patent Owner does not propose interpretations of any claim terms in its Response. We conclude, based on the full trial record, that no term requires express interpretation to determine whether Petitioner has met its burden to prove unpatentability of the challenged claims. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“Because we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy,’ we need not construe [a particular claim limitation] where the construction is not ‘material to the . . . dispute.’” (emphasis added) (citation omitted)).” slip op. at 8

  • Strike new argumentNew argument disregardedGranted in part

    “Pursuant to 37 C.F.R. § 42.23(b), “[a] reply may only respond to arguments raised in the corresponding . . . patent owner response.” “‘Respond,’ in the context of 37 C.F.R. § 42.23(b), does not mean proceed in a new direction with a new approach as compared to the positions taken in a prior filing.” Patent Trial and Appeal Board Trial Practice Guide § II.I, available at https://www.uspto.gov/patents/ptab/trial-practice-guide (last updated Dec. 12, 2025). “While replies . . . can help crystalize issues for decision, a reply . . . that raises a new issue or belatedly presents evidence may not be considered.” Id. An indication that a new issue is improperly raised in a reply is where a petitioner submits “new evidence necessary to make out a prima facie case” of unpatentability, such as a “newly raised rationale to combine the prior art references that was not expressed in the petition.” Id. That is the case here. Petitioner’s rationale in the Petition for why a person of ordinary skill in the art would have been motivated to lower Bowen’s 0.9 eV barrier height to 0.33 eV based on Soukup was that such an artisan would have expected lowering the barrier height to increase TMR. See Pet. 34–36. Faced with Dr. Bokor’s testimony on cross-examination, Petitioner presents a new theory in its Reply that a person of ordinary skill in the art would not have known what impact lowering the barrier height would have (increase TMR, decrease it, or have no impact at all), but would have expected it to change in some “uncertain” way, which is a “legally sufficient motivation” in Petitioner’s view. See Reply 6–10, 13–16, 23–25. In other words, “[r]ather than explaining how its original” position that lowering barrier height would increase TMR “was correct,” Petitioner articulated “an entirely new theory . . . absent from the [P]etition” after Patent Owner cross-examined Dr. Bokor and “pointed out the flaws of [Petitioner’s] position” in its Response. See Wasica Finance GmbH v. Continental Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). “Shifting arguments in this fashion is foreclosed by statute, [Federal Circuit] precedent, and Board guidelines.” Id.” slip op. at 20

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner

    “Ultimately, the cross-examination testimony above is inconsistent with Dr. Bokor’s opinions in his declaration that, for example, “[i]t was understood to one of skill that lowering the barrier height to increase tunneling would have increased the TMR,” and “[o]ne of skill would have been motivated to adjust oxygen vacancy defects to improve TMR by lowering the barrier height.” See Ex. 1024 ¶¶ 176, 277 (emphasis added); see also id. ¶ 172 (“[O]ne of skill in the art would have been motivated to use [Soukup’s 0.33 eV] or similar height in an MgO MTJ to improve tunneling and hence TMR in Bowen.”). Accordingly, we do not find Dr. Bokor’s declaration testimony regarding a motivation to lower Bowen’s barrier height credible. It is Petitioner’s burden to provide a reasoned, evidence-supported explanation for why a person of ordinary skill in the art would have been motivated to lower Bowen’s 0.9 eV barrier height to 0.33 eV as disclosed in Soukup. See NuVasive, 842 F.3d at 1383; Magnum Oil, 829 F.3d at 1380; TriVascular, 812 F.3d at 1066. Petitioner’s reasoning in the Petition that lowering the barrier height (by introducing oxygen defects) would increase TMR is unsupported by evidence.” slip op. at 31

  Patent outcomesUS 11,968,909 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,968,909
• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Power2b, Inc.All claims unpatentable
  PTAB · Mar 13, 2026 · IPR2021-01239 · APJ John D Hamann · IPR · Remand

  On remand, the Board held claims 17, 18, 21, 22, 26, and 30 unpatentable as obvious over Reime, with claims 17, 18, 21, 22, and 30 also obvious over Reime and Hinckley.

  RulingsRemand decision

  • ExcludeMotion to exclude, deniedDenied

    “In addition, Patent Owner filed a Motion to Exclude certain of Petitioner’s evidence (Paper 28) and Petitioner filed an Opposition (Paper 34). We denied this motion. See Paper 41, 47–50.” slip op. at 3

  • Skill levelSkill level board ownOther

    “one having ordinary skill in the art at the time of the invention of the ’850 patent: one who “would have had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field, and . . . years of experience in the research, design, development, and/or testing of touch and/or proximity sensors, human-machine interaction and 3 The Leahy-Smith America Invents Act (“AIA”) included revisions to 35 U.S.C. § 103 that became effective on March 16, 2013. Because the ’850 patent issued from an application filed before March 16, 2013, we apply the pre-AIA version of the statutory basis for unpatentability. 4 US 2003/0034439 A1, published Feb. 20, 2003 (Ex. 1010, “Reime”). 5 US 2002/0021278 A1, published Feb. 21, 2002 (Ex. 1011, “Hinckley”). Petitioner lists the combination of Reime and Hinckley as a separate asserted ground for claim 26. We combine these two asserted grounds into one as they rely on the same combination. additional education substituting for experience and vice versa.” Final Dec. 8–9. This definition for one having ordinary skill was not the subject of appeal, and we maintain it for purposes of this Final Written Decision on Remand. Moreover, it is consistent with the ’850 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “PO Resp. 17–29; Pet. Reply 8–15; PO Sur-reply 6–11. We construed this term in the Final Written Decision. Final Dec. 10–24. In particular, we concluded that (i) “detector assembly” means “two or more detector elements that detect electromagnetic radiation,” and (ii) a detector assembly is not required to be physically separate from (i.e., not interspersed with) a pixel array. Id. at 20, 22. The Federal Circuit found the first part of our construction erroneous. Appeal Dec. 7–10. In particular, the Federal Circuit concluded that “[t]he element.” Id. at 8. In addition, to guide the Board’s analysis on remand, the Federal Circuit construed “the terms ‘at an edge’ and ‘at least one edge’ [to] require a detector assembly to be arranged along one or more edges of a viewing plane defining plate.” Id. at 10–11. In other words, the Federal Circuit “clarif[ied] that arranging a detector assembly ‘at,’ ‘along,’ or ‘about’ ‘at least one edge’ or ‘an edge’ does not limit the detector assembly to being arranged entirely on ‘one edge.’” Id. at 12.” slip op. at 9

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “the Federal Circuit already has concluded that claim 15 is obvious in view of Reime. Appeal Dec. 9–10. Claim 17 further recites “wherein the detector assembly comprises: a support substrate, and an arrangement of detector elements.” Ex. 1001, 67:15–18. We agree with Petitioner and find that Reime teaches these further limitations. Pet. 34–35; Pet. Remand 2–4; Pet. Resp. Remand 1–3. First, as we found in the Final Written Decision, Reime’s receivers 30 and 32 are two detector elements that detect electromagnetic radiation (i.e., light), and Reime’s receivers 30 and 32, collectively, comprise a detector assembly. Final Dec. 27–28 (citations omitted). Moreover, Reime’s two receivers 30 and 32 comprise a detector assembly having multiple detector elements (e.g., two receivers) to teach “an arrangement of detector elements.” Ex. 1010 ¶¶ 73, 86, Figs. 9A–9C; Ex. 2060,7 127:17–18; Pet. 32–33; Pet. Reply 20; Pet. Remand 3. In addition, as we found in the Final Written Decision, Reime teaches that each of receivers 30 and 32 are centered on opposite edges of the plate. 7 Deposition Transcript of Dr. Benjamin Bederson (Apr. 7, 2022). Ex. 1010, Fig. 6A, ¶ 82) (affirming that Reime teaches having one light receiver (e.g., 30 or 32) on each side of a four-sided touch pad). In further support, we agree with Petitioner and find that Reime teaches that receivers 30 and 32 “are mounted in the peripheral area surrounding the LCD 92.” Pet. 32–33; Ex. 1010 ¶ 86; see also id. at Figs. 9A–9C (showing that the receivers are positioned at the edge of the LCD screen); infra annotated Fig. 9E (showing receivers 30 and 32 along edges of the LCD). Accordingly, we find Reime’s detector assembly that comprises receivers 30 and 32 is arranged along two edges (one edge for each receiver) of the LCD, which meets the Federal Circuit’s construction for being arranged at at least one edge. See supra Section III (concluding “at least one edge” means “arranged along one or more edges”) (emphasis added).” slip op. at 12

  Patent outcomesUS 8,624,850 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 8,624,850
• Dr. Squatch, LLC v. The Procter & Gamble CompanyAll claims unpatentable
  PTAB · Jan 28, 2026 · IPR2024-01173 · APJ Susan L C Mitchell · IPR · Final written decision

  Claims 1–7, 9–13, and 16–19 are unpatentable: claims 16–17 are anticipated by Lesniak, and the remaining challenged claims are obvious over the stated combinations.

  RulingsFinal written decision

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “argument that the Lesniak fails to enable a stable deodorant stick. Rather, we are persuaded by Petitioner that Lesniak sufficiently teaches compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Pet. Reply 8 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a second wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Ex. 1086 ¶ 7; see also Reply 8 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32).” slip op. at 22

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Level of Ordinary Skill in the Art Petitioner proposes that a person of ordinary skill in the art (“POSA” or “POSITA”) at the time of the invention “would have (1) at least a B.S. or equivalent degree; and (2) at least two years of experience in cosmetics formulations.” Pet. 24 (citing Ex. 1002 ¶¶ 27–28). Patent Owner does not dispute Petitioner’s proposal about the POSA’s qualifications. See generally PO Resp. We adopt and apply Petitioner’s proposed definition of a POSA, which is consistent with the level of skill reflected in the asserted prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner

    “Patent Owner asserts that the preamble of independent claim 1 reciting “a deodorant stick” is limiting” as it provides antecedent basis for certain other claim elements, specifically, for the recitation of “said deodorant stick being free of an aluminum salt” and “said deodorant stick” having a particular hardness range. PO Resp. 8–9. Patent Owner also points to dependent claims 5–8 as relying on the preamble reciting “a deodorant stick” as antecedent basis for claim elements. Id. at 10. We agree.” slip op. at 8

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “We find that the evidence of record fails to support Patent Owner’s argument that the Lesniak fails to enable a stable deodorant stick. Rather, we are persuaded by Petitioner that Lesniak sufficiently teaches compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Pet. Reply 8 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a second wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Ex. 1086 ¶ 7; see also Reply 8 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32). Having considered the parties’ positions and evidence of record, summarized above, we determine that Lesniak provides sufficient disclosure to enable a person of ordinary skill in the art to formulate a deodorant stick within the parameters of claims 16 and 17. e) Conclusion as to Claims 16 and 17 We agree with Petitioner that “the challenged claims recite nothing more than well-known deodorant ingredients performing their conventional functions.” Pet. Reply 2. Therefore, for the reasons discussed above, we conclude that Petitioner has proved by a preponderance of evidence that Lesniak anticipates claims 16 and 17.” slip op. at 22

  Patent outcomesUS 10,905,647 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,905,647
• Apple Inc. v. Apex Beam Technologies LLCInstituted
  PTAB · Dec 2, 2025 · IPR2025-00894 · APJ Scott A Daniels · IPR · Institution

  The Board instituted IPR on claims 1–20 and all petitioned grounds, finding a reasonable likelihood that Yeo and TS36 render at least claim 1 obvious.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Upon consideration of the arguments and evidence presented by Petitioner and Patent Owner, we are persuaded that Petitioner has demonstrated a reasonable likelihood that it would prevail in showing the unpatentability of at least one of the challenged claims. See 35 U.S.C. § 314(a). Accordingly, we institute an inter partes review of the challenged claims. slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner does not dispute Petitioner’s proposed level of ordinary skill in the art stating that “[f]or the purposes of this Preliminary Response only, Patent Owner utilizes Petitioner’s proposed level of skill in the art.” Prelim. Resp. 2. On this record, Petitioner’s proposed level of ordinary skill in the art is not disputed and is consistent with our review and understanding of the technology and descriptions in the ’767 patent and the asserted prior art references. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). For purposes of this Decision, we rely on Petitioner’s proposed level of ordinary skill in the art.” slip op. at 9

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)No construction neededNot reached

    “under 112(f) pointing out the respective functions and structure disclosed in the ’767 patent specification. Pet. 18–20. Patent Owner does not dispute the construction of these terms, stating only “that claim construction is not required to resolve any issues.” PO Resp. 2 (citing Pet. 18–20). Where there is no dispute and our Decision does not turn on any particular construction of these terms, we need not decide at this point whether “receiver module” and “transmitter module” invoke means-plus-function under 112(f). Pet. 13; Prelim. Resp. 5. And, because there is no dispute, we conclude that no express interpretation of any claim term is necessary to determine whether to institute an inter partes review in this proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the” slip op. at 10

  • BurdenInstituted

    “In an [inter partes review], the petitioner has the burden from the onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1889, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to Patent Owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015) (discussing the burden of proof in inter partes review). slip op. at 8

  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,462,767
• Apple Inc. v. Apex Beam Technologies LLCInstituted
  PTAB · Nov 5, 2025 · IPR2025-00895 · APJ Scott Raevsky · IPR · Institution

  The Board instituted IPR on claims 1–20 and all asserted challenges after finding a reasonable likelihood that at least one challenged claim would be unpatentable.

  RulingsInstitution decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “A person of ordinary skill in the art (POSITA) would have had at least [a bachelor’s degree in] electrical engineering, computer engineering, computer science, or a similar field, along with two years of experience designing or developing wireless networks. Additional education might substitute for some of the experience, and additional substantial experience might substitute for some of the educational background. . . . A POSITA would also have familiarity with the 3GPP LTE standards, and would have understood how to search through the available Technical Specifications for implementing RAN technologies. Pet. 21–22 (citing Ex. 1003 ¶¶ 50–53). Patent Owner uses Petitioner’s proposed level of skill in the art at this stage, with a proposed modification to insert “a bachelor’s degree in” to Petitioner’s statement. Prelim. Resp. 12–13; id. at 12, n.1. We have inserted this proposed modification in brackets in the above block quotation. We are persuaded, on the present record, that Petitioner’s proposal, as modified by Patent Owner, is consistent with the problems and solutions in the ’113 patent and prior art of record. We adopt Petitioner’s skill definition at this stage.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “The parties do not propose any claim constructions. See Pet. 11–12; Prelim. Resp. 8. As no terms are in dispute, we determine that no terms require construction at this stage.” slip op. at 8

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “IV. CONCLUSION At this stage of the proceeding, we determine that Petitioner has demonstrated a reasonable likelihood of prevailing on its challenges as to at least one challenged claim. At this preliminary stage, we have not made a final determination as to the patentability of the challenged claims or any underlying factual and legal issues. V. ORDER It is, therefore, ORDERED that, pursuant to 35 U.S.C. § 314(a), an inter partes review of all challenged claims of the ’113 patent is instituted with respect to all challenges of unpatentability set forth in the Petition; and FURTHER ORDERED that pursuant to 35 U.S.C. § 314(c) and 37 C.F.R. § 42.4, notice is hereby given of the institution of a trial commencing on the entry date of this Decision.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted

    “measurement value, as Jover teaches.” Id. (citing Ex. 1005 ¶¶ 39–40; Ex. 1003 ¶¶ 115–30). Among other reasons, Petitioner contends that a POSITA would have been motivated to combine “to improve the accuracy and reliability of the beam failure determination.” Id. at 37 (citing Ex. 1003 ¶¶ 115–30). Petitioner further contends that a POSITA would have had a reasonable expectation of success because “it would have been straightforward for a POSITA to implement Jover’s triggering condition in Xia’s method.” Id. at 38 (citing Ex. 1003 ¶¶ 115–30). After considering Patent Owner’s arguments, which we address below, we agree with Petitioner at this stage that the combination of Xia and Jover renders obvious limitation [1e]. Patent Owner first argues that Jover “does not cure the deficiencies of Xia because Jover’s threshold condition for an increase in BER is not used for triggering a transmission of the first and second radio signal.” Prelim. Resp. 20. Just like Xia, Patent Owner contends, Jover discloses no “causality between the threshold being exceeded and transmitting the first and second radio signal.” Id. at 21. This argument does not undermine Petitioner’s showing at this stage because Petitioner relies on Xia, not Jover, for the claimed “triggering the transmission,” or “causality,” as Patent Owner calls it. See Pet. 36–38. That is, Petitioner relies on Jover for the triggering condition and on Xia for the actual triggering. See id. Patent Owner’s argument attacking the references individually is unpersuasive. See In re Merck & Co., Inc., 800 F.2d 1091, 1097 (Fed. Cir. 1986) (“Non-obviousness cannot be established by attacking references individually where the rejection is based upon the teachings of a combination of refences.”). Patent Owner next contends that one of ordinary skill in the art would not have combined Xia and Jover “since Jover is directed to the opposite objective of the ’113 Patent or Xia.” Prelim. Resp. 21. That is, Patent Owner asserts, Jover teaches away from the disclosed methods. Id. at 22. Patent Owner explains, “Jover provides no attempt to improve the beam strength, but rather ignores it through beam sweeping or nullif[ies] it, in contrast to the purpose of the ’113 Patent.” Id. at 22–23. At this stage, Patent Owner’s argument is insufficient to undermine” slip op. at 15

  Claim construction§ 103 obviousness
  Patents in suitUS 10,568,113
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.Instituted
  PTAB · Jul 10, 2025 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Institution

  The Board instituted review of claims 1–17 on all asserted grounds, finding a reasonable likelihood of unpatentability on at least one challenged claim.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2023). For the reasons discussed below, we determine that Petitioner establishes a reasonable likelihood of prevailing with respect to the patentability of at least one claim of the ’562 patent. Accordingly, we institute an inter partes review of claims 1–17 of the ’562 patent.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Neither party proposes any explicit construction of any term. See Pet. 7 (“For the purposes of this IPR, the plain meaning of each term can be applied.”). We do not expressly construe any term for purposes of this Decision.” slip op. at 7

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted

    “On this record, we are persuaded that Petitioner adequately establishes that Usui discloses all of the limitations of claim 1. Usui discloses that aluminum or aluminum alloy layer 15 is in electrical contact with titanium underlayer 13, and titanium nitride layer 14 is located “intermediate the [titanium underlayer] 13 and the aluminum or aluminum alloy layer 15” to prevent “reaction between the aluminum layer 15 and underlayer 13.” Ex. 1004, 3:27–29, 3:38–41, 3:58–63. Usui further discloses that “a capping layer is provided above layer 15,” and that “[p]referred capping layers are titanium nitride and combinations of as layer 18 of a group IVA metal, preferably titanium with a titanium nitride layer 19.” Id. at 3:67–4:6. Usui teaches that titanium nitride layer 19 is about 150 to 800 Å thick, and that the thickness of titanium underlayer 13 is between about 90 to 110 Å. Id. at 3:31–33, 4:6–8. Usui also teaches that the interconnect metallurgy structures described therein “exhibit[] enhanced electromigration characteristics” and “are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.” Id. at 1:8–14. Usui’s description of a plurality of metal layers (layers 13–18) and a capping layer formed over the plurality of metal layers (layer 19), along with its description of the structure’s usefulness for forming electrical connections in an integrated circuit structure, is sufficient, on this record, to establish that Usui discloses “an electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. Usui’s teaching that the capping layer is a refractory metal nitride (titanium nitride) that has a thickness (150–800 Å) greater than the bottommost layer of the plurality of metal layers (layer 13, 90–110 Å), sufficiently establishes, on this record, that Usui discloses the “said capping layer consisting only of a refractory metal nitride, said refractory metal nitride forming a top of said electrical contact and having a thickness greater than that of a bottommost layer of said plurality of metal layers” limitation of claim 1.” slip op. at 11

  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips
  Patents in suitUS 8,686,562
• Apple Inc. v. THL Holding Company, LLCAll claims unpatentable
  PTAB · Jul 3, 2025 · IPR2024-00399 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 11–19 are unpatentable as obvious: claims 11–14 over Kalliola, Turunen, Oswald, Vauclair, and Kalayjian; claims 15–18 with Thorn; and claim 19 with Thorn and Sharp.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner asserts that the level of ordinary skill in the art corresponds to “a bachelor’s degree in computer science, computer engineering, electrical engineering, or a similar technical field and 2-4 years of experience with wireless ranging and positioning systems, wireless communication devices, and associated computer programming.” Pet. 4 (citing Ex. 1003 ¶ 35). “Patent Owner agrees that this description reasonably represents the level of ordinary skill required to understand and implement the teachings of the ’246 Patent, as well as the prior art cited in the Petition.” PO Resp. 14 (citing Ex. 2002 ¶ 22). Accordingly, we adopt Petitioner’s proposed level of skill.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “device.” This term appears twice in claim 11, once in the phrase “an orientation sensor to detect rotation of the mobile communication device,” and once in the phrase “rotation of the mobile communication device detected by the orientation sensor.” Ex. 1001, 39:13–14, 39:36–38. Patent Owner argues that we should construe this term as limited to “detecting the rotation of the mobile communication device as a whole, not the movement of individual components.” PO Resp. 15–18. Petitioner disputes this, arguing that “rotation of the mobile communication device” should be construed not only to cover rotation of the device as a whole but also should “encompass[] any rotation of the mobile communication device relative to any object, including itself,” which would extend to rotation of “any component of the device.” Reply 4–5. We need not resolve this dispute to determine the outcome of Petitioner’s asserted challenges to the ’246 patent. As discussed more fully below, under either party’s proposed construction of “rotation of the mobile communication device,” Petitioner has shown by a preponderance of the evidence that the challenged claims are unpatentable. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9

  • Expert testimonyOther

    “On the record developed during trial, we are persuaded that Petitioner has shown by a preponderance of the evidence that Kalliola teaches “an orientation sensor to detect rotation of the mobile communication device,” where “rotation of the mobile communication device” includes rotation of the device as a whole, regardless of whether it also includes rotation of one portion of the device relative to another. Kalliola teaches “motion sensors integrated in WCD 100” that are “used to detect when WCD 100 is being moved,” as well as to detect “when user 110 moves WCD 100 too quickly for an accurate DoA estimation.” Ex. 1004 ¶¶ 84, 86. Although Patent Owner argues that Kalliola’s motion sensors do not detect rotation of the device, this is incorrect on the record as developed at trial. Kalliola teaches that the motion sensor may take “the form of a semiconductor gyroscope chip.” Id. ¶ 84. There is ample evidence that gyroscopes detect rotation. Ex. 1013, 38 (identifying as an “orientation sensor” a “[t]hree-axis gyro” and a “[d]ynamic [h]igh [r]ange [gyro]”); Ex. 1046, 49:18–20 (Dr. Feuerstein testifying that gyroscopes “can be used to detect angular velocity”); Ex. 1047 ¶ 47 (citing Ex. 1051, 170; Ex. 1053, 9) (Dr. Buehrer testifying that a person of ordinary skill in the art “would understand that gyroscopes are well-known inertial sensors that specifically detect rotational motion”). Thus, by a preponderance of the evidence, Petitioner has shown that Kalliola teaches the “orientation sensor to detect rotation of the mobile communication device” of this limitation.” slip op. at 17

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “whether Kalliola’s teaching of pausing and resuming its DoA estimation based on detected rotational motion, or Kalliola’s teaching of speeding up its DoA estimation based on detected rotational motion, amounts to determining direction based on rotation. Pet. 63–64; PO Resp. 25–27; Reply 24–27; Sur-Reply 11–14. On the record developed during trial, we are persuaded that the preponderance of the evidence supports a finding that Kalliola teaches determining direction based on rotation. First, Kalliola discloses “pausing a DoA estimation until the motion of the WCD is detected by the motion sensors,” then resuming “the updating of the DoA estimation” when motion is detected. Ex. 1004 ¶¶ 14, 84. Second, Kalliola discloses a “correction or compensation mode” that is “employed when user 110 moves WCD 100 too quickly for an accurate DoA estimation,” with this “increase[d] speed of the DoA estimation” being triggered by the “[i]ncreased activity detected by motion sensors in WCD 100.” Id. ¶ 86. As discussed above with respect to limitation 11(d), the detected motion that triggers either of these modes can be rotational motion of the WCD detected by a gyroscope.” slip op. at 22

  Patent outcomesUS 11,350,246 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,350,246
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.Instituted
  PTAB · Jun 18, 2025 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Institution

  The Board instituted IPR on claims 1, 2, 5–7, 9, 16, and 17, finding a reasonable likelihood that claim 1 is anticipated by Boyer.

  RulingsInstitution decision

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied

    “approximately two weeks before the statutory deadline for a final written decision, but the most recent median time-to-trial statistics for Judge Gilstrap in the Eastern District of Texas indicate that the actual trial date will likely be in July 2026, which is later than the statutory deadline to issue a final written decision in this proceeding in mid-June 2026. See Ex. 2001, 7 (median time from filing to trial of 23.2 months); Prelim. Resp. 10. Thus, we find this factor is neutral or weighs slightly against discretionary denial.” slip op. at 10

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “At this preliminary stage, we determine whether the information presented shows a reasonable likelihood that Petitioner would prevail in establishing that at least one of the challenged claims would have been unpatentable over the proposed prior art. We analyze the asserted grounds with the above-noted principles in mind.” slip op. at 7

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears to be consistent with the ’713 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 16

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed

    “We note that, as discussed below, we are able to determine whether to institute inter partes review of the ’713 patent without expressly construing the term “from multiple print heads or deposition lines.” See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). As for Patent Owner’s argument that Petitioner has failed to carry its burden to identify how the claims are to be construed, we disagree on the present record. Although Petitioner does not provide a preferred construction for the single term it proposes requires construction, Petitioner does identify which of its two alternative constructions applies to each of its asserted grounds of unpatentability. Pet. 6 (“Under the first construction, [the obviousness grounds] are applicable, and [the anticipation ground] would be excluded from the claim scope. Under the alternative construction, all of [the asserted grounds] are applicable.”). In our view, this approach does not fail to satisfy Petitioner’s burden under 37 U.S.C. § 42.104(b)(3).” slip op. at 17

  Claim construction§ 102 anticipationDiscretionary denialcites Phillips
  Patents in suitUS 9,421,713

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.