- Hope Medical Enterprises, Inc. v. Fennec Pharmaceuticals, Inc.No claims unpatentablePTAB · Sep 1, 2023 · IPR2022-00125 · APJ Julia Heaney · IPR · Final written decision
The Board granted the revised noncontingent motion to amend, canceled claims 18 and 20, and entered substitute claims 28 and 29, which were not proven obvious.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner, relying on the testimony of Dr. Rogers, contends that a person of ordinary skill in the art would have [had] a bachelor’s degree or equivalent in any of the pharmaceutical sciences with at least 5 years of experience in solid state chemistry; a master’s degree in any of the pharmaceutical sciences with at least 3 years of experience in solid state chemistry; or a Ph.D. in any of the pharmaceutical sciences with 1 year of experience in solid state chemistry. Pet. 8 (citing Ex. 1008 ¶¶ 24–28). Petitioner further states that such “[a] person could also have qualified as a [person of ordinary skill in the art] with some combination of (1) more formal education and less technical or professional experience or (2) less formal education and more technical or professional experience.” Id. Patent Owner does not dispute Petitioner’s proposed definition of a person of ordinary skill. See generally MTA, RMTA. Having considered the parties’ arguments and evidence, we adopt the level of ordinary skill in the art proposed by Petitioner, because it is consistent with the disclosures of the ’363 patent and the prior art of record. We note, however, that neither party contends that the outcome of this case would differ based on our adoption of any particular definition of a person of ordinary skill in the art.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“In our Preliminary Guidance, we construed “for a pharmaceutical composition” to mean “in combination with pharmaceutically acceptable excipients,” based on the ’363 patent’s definition providing that “[t]he terms ‘formulation’ or ‘pharmaceutical composition’ as used herein refers to the drug in combination with pharmaceutically acceptable excipients.” Prelim. Guid. 5–6 (citing Ex. 1001, 12:26–28; Ex. 2010, 17:11–12; Ex. 2011, 26:26– 27). We also encouraged the parties to address whether “for a pharmaceutical composition,” which appears in the preamble of substitute claims 28 and 29, is limiting, as opposed to a statement of intended use or purpose. Id. at 6. Following our Preliminary Guidance, the parties submitted further arguments concerning the term “for a pharmaceutical composition.” Patent Owner argues the term requires that the claimed process provide STS that is sufficiently pure for use in a pediatric patient (see RMTA 8–11) and that the word “drug” in the ’363 patent’s definition of “pharmaceutical composition” requires that the anhydrous STS is of sufficient purity for pharmaceutical use. Reply RMTA 3. Petitioner argues that the construction set forth in our Preliminary Guidance was correct. See Sur-reply RMTA 2–3. Having considered the arguments and evidence, we do not further construe the term “for a pharmaceutical composition” in this Decision because, as discussed in our analysis of obviousness below, it is not necessary to construe the term in order to determine whether Petitioner has met its burden of demonstrating by a preponderance of the evidence that proposed substitute claims 28 and 29 are unpatentable. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 13
- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted
“1. Reasonable Number of Substitute Claims A motion to amend must “propose a reasonable number of substitute claims.” 35 U.S.C. § 316(d)(1)(B); see 37 C.F.R. § 42.121(a)(3) (“A motion to amend may cancel a challenged claim or propose a reasonable number of substitute claims.”). Patent Owner proposes the same number of substitute claims as the original challenged claims that are cancelled, i.e., a one-to-one substitution for a total of two substitute claims. MTA 2; RMTA. “There is a rebuttable presumption that a reasonable number of substitute claims per challenged claim is one (1) substitute claim.” Lectrosonics, Paper 15 at 4; see 37 C.F.R. § 42.121(a)(3). Petitioner does not argue otherwise. See generally Opp. RMTA. Therefore, we determine that Patent Owner proposes a reasonable number of substitute claims. 2. Support in the Original Disclosure Patent Owner has identified written description support in the originally filed disclosure of the ’363 patent for the new limitations added for the proposed substitute claims. See RMTA 5–8. We have reviewed Patent Owner’s assertions of support in the original disclosure for the proposed revised substitute claims and determine that sufficient support exists. Petitioner does not argue otherwise. See generally Opp. RMTA. Therefore, we determine that Patent Owner has met this requirement. 3. Respond to a Ground of Unpatentability “A motion to amend may be denied where . . . [t]he amendment does not respond to a ground of unpatentability involved in the trial.” 37 C.F.R. § 42.121(a)(2)(i). Patent Owner asserts that the proposed revised substitute claims are patentable over the combination of references that forms the basis of the obviousness ground on which we instituted trial. RMTA 12–13. Petitioner does not argue otherwise. See generally Opp. RMTA. Therefore, we determine that Patent Owner has met this requirement. 4. Scope of the Claims Patent Owner asserts that the proposed revised substitute claims do not enlarge the scope of original claims 18 and 20. RMTA 5. We have reviewed Patent Owner’s assertion that the purity amendments of proposed revised substitute claims 28 and 29 narrow the claims’ scope. Id. Petitioner does not argue otherwise. See generally Opp. RMTA. Therefore, we determine that Patent Owner has met this requirement.” slip op. at 17
- BurdenNot shown unpatentable
“determine the evidence relied on by Petitioner does not support Petitioner’s position that a person of ordinary skill in the art would have been motivated to combine Levenson, Sherman, Edwards, and USP. Petitioner’s contention that it would have been obvious to a person of ordinary skill in the art to combine the teachings of Levenson with Sherman is based on Dr. Rogers’s testimony that “[b]oth references disclose synthesis of sodium thiosulfate pentahydrate.” Ex. 1008 ¶ 151; see Pet. 36, 38. Dr. Rogers further testified it would have been obvious to add Edwards’s dehydrating step to the preparation of STS pentahydrate “which is obtained following the teachings of Levenson and Sherman” because “Edwards itself discloses dehydrating [STS] pentahydrate.” Id. ¶ 154. The Petition included these arguments even though they were inconsistent with Petitioner’s previous statement, during the Sherman prosecution, that Levenson taught STS heptahydrate, and therefore “does not provide any teaching with respect to [STS] pentahydrate.” Ex. 2013, 97. This prior inconsistent statement undercuts Petitioner’s rationale for combining Levenson, Sherman, and Edwards in this proceeding. Moreover, Petitioner’s rationale for combining the references in this proceeding is inconsistent with its statements about Levenson during the Sherman prosecution. Recognizing this inconsistency, Petitioner now takes the position that the Petition and Dr. Rogers’s testimony were incorrect. Paper 32; see Tr. 21:14–22:7, 59:1–2 (reemphasizing that “Petitioner maintains the statements that it made in the Sherman prosecution regarding Levenson”). Petitioner attempts to rationalize the inconsistency between its statements in the Sherman prosecution (including that “Levenson does not provide any teaching with respect to [STS] pentahydrate”) and its position in this proceeding by arguing that Dr. Rogers relies on Levenson as teaching surface activation “regardless of any particular hydrates Levenson discloses.” Tr. 22:8–9. That argument is not persuasive, because Dr. Rogers’s declaration clearly states the primary reason for his opinion that it would have been obvious to a person of ordinary skill in the art to combine the teachings of Levenson with Sherman: “[b]oth references disclose synthesis of sodium thiosulfate pentahydrate.” Ex. 1008 ¶ 151. Contrary to Petitioner’s argument, Dr. Roger’s reliance on the surface activation teachings of Levenson is because he believes that both references pertain to STS pentahydrate; the surface activation teachings are not stated as an independent reason to combine the references. Id. Petitioner provides no further explanation of how a person of ordinary skill in the art would have been motivated to combine Levenson’s teachings regarding manufacture of STS heptahydrate with Sherman’s and Edwards’s teachings regarding STS pentahydrate, or how a person of ordinary skill would have regarded the difference between STS hydrates. Dr. Rogers’s acknowledgement of stability differences among STS hydrates highlights the insufficiency of Petitioner’s showing in this regard. See Ex. 2005, 35, 39. Having changed its position at the close of trial and having effectively withdrawn Dr. Rogers’s testimony as to similarities between Levenson and” slip op. at 24
Patent outcomesUS 10,792,363 not shown unpatentableClaim constructioncites KSR · GrahamPatents in suitUS 10,792,363 - Nanofiber Solutions, LLC v. Acera Surgical, Inc.Some claims unpatentablePTAB · Dec 13, 2022 · IPR2021-01016 · APJ Christopher L Crumbley · IPR · Final written decision
Claims 1, 2, 4–7, and 13 are unpatentable: claims 1, 2, 4, 5, and 13 as anticipated by Johnson, and claims 6 and 7 as obvious over Johnson and Johnson–Liu, respectively.
RulingsFinal written decision- Skill levelOther
“Petitioner contends that: A person of ordinary skill in the art (“POSITA”) at the time of filing the ‘228 Patent would have been a person having a bachelor's degree in science or engineering, for example in the fields of chemistry, chemical engineering, or biomedical engineering, with undergraduate research experience, coupled with at least three years of industry experience, that linked the fabrication of fibrous polymeric materials to performance requirements for scaffolds for the promotion of proliferation of biological cells and the growth and/or reconstruction of biological tissues. Pet. 11–12 (citing Ex. 1002 ¶¶ 112–116). In response, Patent Owner notes that all challenged claims recite electrospun fibers but that Petitioner’s proposed level of skill “requires (1) no coursework, training or experience with electrospinning and (2) improperly focuses on scaffolds for the promotion of proliferation of biological cells and the growth and/or reconstruction of biological tissues.” PO Resp. 7 (citing Ex. 2001, ¶¶ 38–39). But Patent Owner then concedes that this “difference is immaterial to deciding the issues raised by the Petition.” Id. at 8.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“construe claims “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b), including construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b); see Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). Furthermore, we expressly construe the claims only to the extent necessary to resolve the parties’ dispute. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). The parties agree that the terms of the challenged claims should be given their “plain and ordinary meaning” and that no express claim construction is necessary to address Petitioner’s challenges. Pet. 12; PO Resp. 6. We agree that no claim terms require express construction for purposes of resolving the dispute between the parties.” slip op. at 10
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed
“Upon review, we are unpersuaded that Petitioner has improperly mixed and matched disclosures from Johnson to arrive at an anticipatory reference. Patent Owner is correct that Petitioner primarily relies on Example 1 as evidence for the method by which its scaffold is made. But the disclosure found in paragraph 98 is not a “distinct” teaching of the type described in Net MoneyIN; rather, it is a general description of the structures that may be created by Johnson’s method: “A scaffold may comprise any number of layers, including about 1 layer, about 2 layers, about 3 layers, about 4 layers, about 5 layers, and so on.” Ex. 1009 ¶ 98. Patent Owner has not directed us to anything in the disclosure of Johnson that indicates that this is a “distinct” teaching or embodiment, instead of a general description of the types of scaffolds that Johnson encompasses. We see no reason why the general disclosures regarding Johnson’s scaffolds should be limited to specific embodiments, or precluded from applying to the method of Example 1.” slip op. at 14
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureNot shown unpatentableNot shown unpatentable
“We are unconvinced by Petitioner’s arguments and evidence. While we recognize that the range of claim 3 is very broad, and it is possible that scaffolds having fiber diameters as set forth in Johnson could have a mean pore size falling within the range, inherency “may not be established by probabilities or possibilities.” Par Pharm., Inc. v. Twi Pharms., Inc., 773 F.3d 1186, 1196 (Fed. Cir. 2014). Nor does Petitioner sufficiently explain why a person of ordinary skill in the art would have understood the process of Example 1 to necessarily result in the claimed mean pore size. We are also persuaded by Patent Owner’s argument that Boland 2005’s disclosure of a fiber diameter similar to Johnson’s that nevertheless falls outside the claimed mean pore size range. We note that Petitioner never addresses Boland 2005 in its Reply. 4. Conclusion as to Anticipation For these reasons, we find that Petitioner has met its burden of showing that claims 1, 2, 4, 5, and 13 are anticipated by Johnson, but has failed to meet its burden as to claim 3.” slip op. at 18
Patent outcomesUS 10,632,228 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 10,632,228 - Peag LLC (D/B/A Jlab Audio) / Audio Partnership LLC et al. v. Varta Microbattery GmbHAll claims unpatentablePTAB · Jan 5, 2022 · IPR2020-01214 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1–8 are unpatentable as obvious over Kobayashi and skilled-artisan knowledge; the contingent motion to amend is granted for substitute claims 9–16.
RulingsFinal written decision- ExcludeNew argument disregardedNew argument consideredGranted in part
“regarding (1) the motivation to combine Kaun with Kobayashi based on dendrite formation (id. at 2–4), (2) additional motivations to modify Kaun with Kobayashi (id. at 4–6), (3) a reasonable expectation of success relating to Kaun’s central fastener (id. at 6–7), and (4) a reasonable expectation of success regarding Kobayashi’s modified electrode assembly (id. at 7–9). Because we do not reach Petitioner’s challenge based on the combination of Kaun and Kobayashi, as discussed below, we similarly need not reach Patent Owner’s Motion to Exclude Mr. Gardner’s opinions as they relate to the Kaun/Kobayashi combination. Accordingly, we dismiss Patent Owner’s Motion to Exclude these purportedly new opinions as moot. We address Patent Owner’s remaining concerns, relating to Mr. Gardner’s allegedly new testimony regarding Kobayashi, below.” slip op. at 8
- Skill levelSkill level petitioner adoptedDecided for petitioner
“In the Decision on Institution, we determined that a person of ordinary skill in the art at the time of the invention of the ’913 patent would have had at least a bachelor’s degree in mechanical engineering, or a similar field, such as materials engineering, chemical engineering, or physics with at least five years of experience in the field of battery design and manufacturing. A person with a master’s degree in one of the above fields could have less practical experience of approximately three years. A person with a PhD could have less practical experience, about two years. A person with less education but more relevant practical experience may also meet this standard. DI 20–21 (adopting Petitioner’s proposed definition). For purposes of this Final Written Decision, we maintain our determination from the Decision on Institution because neither party asserts that our decision depends on that determination and because the level of skill is consistent with the record. See PO Resp. 8 (stating that “[t]he claims are patentable regardless of which definition is used.”); see generally Pet. Reply; MTA Opp. 1–2 (“Regardless of which definition is used, however, Patent Owner’s Substitute Claims are still not patentable.”).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed
“In their briefing, the parties dispute the meaning of three claim terms or phrases—(1) “insulating means”, (2) “connected to one another by at least one flat separator,” and (3) “button cell.” See Pet. 17–21; PO Resp. 9–12. We discern no material difference between the parties’ respective constructions. Additionally, Patent Owner, during the hearing, expressed a general view that claim construction was unlikely to affect the parties’ positions.6 In particular, Patent Owner states that “[o]ur position is that really nothing turns on claim construction. You don’t have to engage in claim construction in this case.” Tr. 56:18–20, 56:21–24 (explaining that 6 The parties disagree as to what the newly added phrase “the cup casing include[ing] a first part proximal to the flat bottom area and a second part disposed in the overlapping area, the first part of the casing being disposed radially inward with respect to the second part” means. See generally MTA Opp.; MTA Reply; MTA Sur-reply. Neither party proposes an express construction for this phrase. Id. We address the interpretation of this phrase below and only to the extent necessary to resolve the dispute raised by the parties’ substantive arguments. limitations were submitted for construction “to gain some benefit in the co-pending litigations.”). Only terms that are in controversy need to be construed, and then only to the extent necessary to resolve the controversy. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (applying Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) in the context of an inter partes review). Because the outcome of our decision does not depend on either parties’ claim construction position, we determine that none of the identified claim terms require construction to resolve the issues in dispute in this proceeding.” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“On this issue, we agree with Petitioner. Mr. Gardner explains that the skilled artisan “would further recognize that the output conductor can be comprised of various materials . . . . which could be metal or various materials . . . . [and] the shape of the output conductor is not particularly limited.” Ex. 1003 ¶ 322. Mr. Gardner further testifies that a person of ordinary skill in the art “would recognize, not only that metal foil conductors could be inserted into these grooves without difficulty, but also that the depth of the grooves can be altered in order to better accommodate metal foil output conductors.” Ex. 1041 ¶¶ 53, 70. We recognize Patent Owner’s argument that numerous factors must be considered and that conventional battery design does not necessarily translate to button cell designs (PO Resp 25–26), but as Mr. Gardner testifies, “this may be true in some cases, [but] the lessons and advantages of using techniques from conventional battery design and applying it to button cell would be obvious to a [person of ordinary skill in the art].” Ex. 1041 ¶ 103. He continues to explain that “[n]aturally, such transposition of techniques would require some modification and adjustments. . . . [and that] each of these adjustments, . . . would be well within the skill of a [person of ordinary skill in the art].” Id. ¶ 104 (describing, for example, “reducing the thickness of the conductor plates of Kobayashi”). We credit Mr. Gardner’s testimony. Moreover, Patent Owner does not allege that any proposed modification would be beyond the skill of a person of ordinary skill in the art or explain how any of the “constraints unique to . . . button cell design” (PO Resp. 25) are relevant to the proposed substitution of a metal foil for a metal terminal electrode plate. See generally id.; Sur-reply. Finally, Patent Owner argues that “[r]eliance upon the general knowledge of a [person of ordinary skill in the art] to provide a missing element in a combination of references is an exception rather than the rule” and “is particularly true where the proposed modification goes to the essence of the claims.” PO Resp. 26. Patent Owner states that “Petitioners have provided no more than ‘conclusory statements and unspecified expert testimony’ to supply a metal foil that is admittedly missing from Kobayashi, and is not shown in any other button cell art.” Id. at 27. We disagree. As the Federal Circuit has explained ‘common sense and common knowledge have their proper place in the obviousness inquiry,’ (a) invoking ‘common sense . . . to supply a limitation that was admittedly missing from the prior art’ should generally only be done when the [missing] limitation in question [is] unusually simple and the technology particularly straightforward;’ and (b) references to common sense ‘cannot be used as a wholesale substitute for reasoned analysis and evidentiary support’ Koninklijke Philips N.V. v. Google LLC, 948 F.3d 1330, 1338 (Fed. Cir. 2020)(quoting Arendi S.A.R.L v. Apple Inc., 832 F.3d 1355, 1361–1362 (Fed. Cir. 2013)). Here, Petitioner proposes to substitute a metal foil for a metal terminal electrode plate to provide contact with the inner surface of the button cell housing. Ex. 1006 ¶ 34. As detailed above, Petitioner and Mr. Gardner direct our attention to the prior art of record which suggests use of foil within small battery cells to provide electrical contact was well-known and explains why the skilled artisan would have reduced the thickness of the terminal electrode plate to maximize the available space for active electrode components. Accordingly, unlike the expert in Arendi, Petitioner here provides more than “conclusory statements and unspecific expert testimony.” Arendi, 832 F.3d at 1366.” slip op. at 22
Patent outcomesUS 9,799,913 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,799,913 - Peag LLC (D/B/A Jlab Audio) / Audio Partnership LLC et al. v. Varta Microbattery GmbHAll claims unpatentablePTAB · Jan 5, 2022 · IPR2020-01212 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1–12 are unpatentable as obvious over Kobayashi and Kaun; the contingent motion to amend is granted for substitute claims 14–25.
RulingsFinal written decision- Expert testimonyPetitioner expert creditedDecided for petitioner
“that “Kaun discloses that the cell is sealed ‘by a ‘U’ shaped insulator/gasket 32 . . . to seal the cell without pressure-loading,’” and therefore, venting via a pressure release seal is not required. Pet. 64 (citing Ex. 1005 ¶ 120). In an alternate embodiment, Kaun provides a means to relieve gas pressure “via the peripheral gasket which can reseal after an event.” Ex. 1005 ¶ 91. As Petitioner explains, “Kaun discloses that it is sealed, but upon the application of certain conditions, the internal pressure of gases within the cell can cause gases to vent. During such events, Kaun discloses ‘[t]he specified limit for internal pressure is handled by release via the peripheral gasket which can reseal after an event.’” Pet. Reply 13 (citing Ex. 1041 ¶¶ 37–39; Ex. 1005 ¶¶ 91, 101). Thus, while Kaun discloses venting to prevent pressure build up, Kaun “is otherwise sealed at all times during functioning.” Id. (citing Ex. 1041 ¶¶ 38–39; Ex. 1005 ¶ 101). Neither the ’835 patent nor Patent Owner’s own proposed construction of “closed without being beaded over” requires closure at all times. Furthermore, Mr. Gardner testifies that “[i]f a battery which, upon application of significant internal pressure, would be considered not ‘closed’ at other times, th[e]n almost no battery could be considered closed. [Because] [a]ny battery, when subjected to certain pressures, would leak or burst.” Ex. 1041 ¶ 39. We credit Mr. Gardner’s undisputed testimony in this regard. Mr. Gardner reasons that a person of ordinary skill in the art would understand that Kaun is closed.” Id. Dr. Peckerar similarly testifies that Kaun shows a housing that is closed without being beaded over. Ex. 1034, 131:4–11; 237:19–238:22 (describing Kaun as “closed during normal operation”). Accordingly, the record evidence supports Petitioner’s assertion that the combination of Kobayashi and Kaun suggests a button cell that is closed without being beaded over.” slip op. at 28
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We discern no material difference between the parties’ respective constructions. Additionally, Patent Owner, during the hearing, expressed a general view that claim construction was unlikely to affect the parties’ positions.8 In particular, Patent Owner states that “[o]ur position is that really nothing turns on claim construction. You don’t have to engage in 8 The parties disagree as to what the newly added phrase “the cup casing include[ing] a first part proximal to the flat bottom area and a second part disposed in the overlapping area, the first part of the casing being disposed radially inward with respect to the second part” means. See generally MTA Opp.; MTA Reply; MTA Sur-reply. Neither party proposes an express construction for this phrase. Id. We address the interpretation of this phrase below and only to the extent necessary to resolve the dispute raised by the parties’ substantive arguments. claim construction in this case.” Tr. 56:18–20, 56:20–24 (explaining that limitations were submitted for construction “to gain some benefit in the co-pending litigations.”). Only terms that are in controversy need to be construed, and then only to the extent necessary to resolve the controversy. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (applying Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) in the context of an inter partes review). Because the outcome of our decision does not depend on either parties’ claim construction position, we determine that none of the identified claim terms require construction to resolve the issues in dispute in this proceeding.” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“Thus, Patent Owner identifies three claimed features—i.e., the jelly- roll configuration, the insulating layer, and a housing closed without being beaded over—as responsible for the improved performance of the VARTA CoinPower® button cell batteries. Id. However, Patent Owner’s declarants testify further and explain that it is the combination of the three identified features, in addition to a flat foil conductor resting flat between the electrode top and housing and welding the foil conductor from outside the housing, that are responsible for improved performance. In particular, Mr. Miehlich, employed in VARTA’s marketing and sales department, testifies that the new cell design, which “provided unprecedented increases in performance, including in energy density, charge capacity, and cycling stability,” consisted of a “jelly roll electrode coil packed tightly into an uncrimped, button-like housing. The electrode coil was protected against short-circuiting by [an] insulating means, and was connected to the cell terminals by a flexible flat foil conductors resting flat between the electrode top and housing, and welded to the housing components from the outside. These features are all found in the claims of the VARTA patents here under review. Ex. 2045 ¶¶ 15–16. And, Dr. Lindner, one of the named inventors of the ’835 patent, testifies that the complex issues we faced were how to safely pack the required amount of electrode material into the very small “button”-sized housing and protect it against short circuits; how to connect the “jelly roll” electrode to the terminals in such a confined space without itself consuming much volume, and how to seal the top and bottom of the cell housing, all while accommodating the expansion and contraction of the electrode winding and the resulting mechanical forces. Ex. 2046 ¶ 33. According to Dr. Linder, the jelly-roll configuration with an insulator, flexible foil output conductors, sealing the cell without crimping, and welding the foil conductors from outside the housing each contributed to the improved battery performance. Id. ¶¶ 34–43. Thus, it is the combination of five elements—not the three claimed in the ’835 patent—that are purportedly responsible for the “vastly increased performance characteristics” of the CoinPower® products. Id. ¶ 43; see also id. ¶ 45 (noting that “various aspects of our invention are covered by 10 issued patents, including the four United States patents here under review” (emphasis added)); Tr. 84:24–85:10 (explaining that welding, for example, is “also part of the success”). Like the patent owner in Fox Factory, “[i]n light of the patentee’s own assertions about the significance of the unclaimed features, no reasonable fact finder could conclude that these features are insignificant.” Fox Factory, 944 F.3d 1375. As a result, the patent claims are not coextensive with the CoinPower® products because those products include “‘critical’ unclaimed feature[s] that [are] claimed by a different patent and materially impacts the product’s functionality.” Id.” slip op. at 40
Patent outcomesUS 9,153,835 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,153,835 - Peag LLC (D/B/A Jlab Audio) / Audio Partnership LLC et al. v. Varta Microbattery GmbHAll claims unpatentablePTAB · Jan 5, 2022 · IPR2020-01213 · APJ Christopher L Crumbley · IPR · Final written decision
Claims 1–8 are unpatentable as obvious over Kobayashi and Kwon; substitute claims 10–14, 16, and 17 are allowed, while the motion to amend is denied as to claim 15.
RulingsFinal written decision- Expert testimonyPetitioner expert creditedDecided for petitioner
“On this issue, we agree with Petitioner. Mr. Gardner explains that the skilled artisan “would further recognize that the output conductor can be comprised of various materials . . . . which could be metal or any various materials [and] the shape of the output conductor is not particularly limited.” Ex. 1003 ¶ 322. Mr. Gardner further testifies that a person of ordinary skill in the art “would recognize, not only that metal foil conductors could be inserted into these grooves without difficulty, but also that the depth of the grooves can be altered in order to better accommodate metal foil output conductors.” Ex. 1041 ¶¶ 53, 70. We recognize Patent Owner’s argument that numerous factors must be considered and that conventional battery design does not necessarily translate to button cell designs (PO Resp. 20– 21), but as Mr. Gardner testifies, “this may be true in some cases, [but] the lessons and advantages of using techniques from conventional battery design and applying it to button cell would be obvious to a [person of ordinary skill in the art].” Ex. 1041 ¶ 103. He continues to explain that “[n]aturally, such transposition of techniques would require some modification and adjustments. . . . [and that] each of these adjustments, . . . would be well within the skill of a [person of ordinary skill in the art].” Id. ¶ 104 (describing, for example, “reducing the thickness of the conductor plates of Kobayashi”). We credit Mr. Gardner’s testimony. Moreover, Patent Owner does not allege that any proposed modification would be beyond the skill of a person of ordinary skill in the art or explain how any of the “difficulties in manufacturing a button cell” (PO Resp. 52) are relevant to the proposed substitution of a metal foil for a metal terminal electrode plate. See generally id.; Sur-reply. Thus, based on the evidence and argument of record, we determine that the combination of Kobayashi and Kwon, and the general knowledge of those skilled in the art, would suggest the use of foil in place of Kobayashi’s terminal electrode plates, and that the foil would bear flat on one of the lateral ends of the electrode separator assembly.” slip op. at 24
- Skill levelSkill level petitioner adoptedDecided for petitioner
“In the Decision on Institution, we determined that a person of ordinary skill in the art at the time of the invention of the ’858 patent would have had at least a bachelor’s degree in mechanical engineering, or a similar field, such as materials engineering, chemical engineering, or physics with at least five years of experience in the field of battery design and manufacturing. A person with a master’s degree in one of the above fields could have less practical experience of approximately three years. A person with a PhD could have less practical experience, about two years. A person with less education but more relevant practical experience may also meet this standard. DI 20 (adopting Petitioner’s proposed definition). For purposes of this Final Written Decision, we maintain our determination from the Decision on Institution because neither party disputes that determination and because the level of skill is consistent with the record. See PO Resp. 7 (person of ordinary skill “would possess a Bachelor’s degree in electrical, mechanical or chemical engineering or equivalent [and] would also have two to three” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“We discern no material difference between the parties’ respective constructions. Additionally, Patent Owner, during the hearing, expressed a general view that claim construction was unlikely to affect the parties’ positions. In particular, Patent Owner states that “[o]ur position is that really nothing turns on claim construction. You don’t have to engage in claim construction in this case.” Tr. 56:18–20, 56:20–22 (explaining that limitations were submitted for construction “to gain some benefit in the co-pending litigations.”). Only terms that are in controversy need to be construed, and then only to the extent necessary to resolve the controversy. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (applying Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) in the context of an inter partes review). Because the outcome of our decision does not depend on either parties’ claim construction position, we determine that none of the identified claim terms require construction to resolve the issues in dispute in this proceeding.” slip op. at 13
- ExcludeMotion to exclude, deniedMixed
“We are not persuaded that the identified portions of Mr. Gardner’s Supplemental Declaration are improper. In the Petition, Petitioner alleged that a person of ordinary skill in the art would have had reason to substitute known metal foils for the metal conductor plates of Kobayashi in order to reduce the size of inactive materials and improve performance. Pet. 69–70 (citing Ex. 1003 ¶ 323). In its Response, Patent Owner argued, among other things, that the metal foil lacks the requisite rigidity to support the remaining components of the winding axis core (PO Resp. 26–27, 31) and that because metal connecting plates 4a and 5b are positioned within recesses of insulating plates 8 and 9, replacing the metal connecting plates with metal foils would result in an unreliable connection because the metal foil would become embedded within the grooves of the insulating plates (id. at 28–29, 30). Mr. Gardner’s supplemental testimony specifically addresses Dr. Peckerar’s and Patent Owner’s concerns that metal foils would be unsuitable in Kobayashi due to their flexibility and thickness as compared to the insulating plates. Ex. 1041 ¶¶ 53 (“the depth of the grooves can be altered in order to better accommodate metal foil output conductors”), 70, 71 (explaining that it is the winding core that provides structure not the output conductor plates), 81, 86 (explaining that the person of ordinary skill in the art could either adjust the size of the output conductors or the depth of the cavities themselves), 87. Therefore, Mr. Gardner’s testimony that the ordinarily skilled artisan would have understood how to account for the technical challenges Patent Owner identified properly responds to arguments raised by Patent Owner in its Patent Owner response. Accordingly, we deny Patent Owner’s Motion to Exclude as to Mr. Gardner’s testimony on this issue.” slip op. at 9
Patent outcomesUS 9,799,858 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,799,858 - Peag LLC (D/B/A Jlab Audio) / Audio Partnership LLC et al. v. Varta Microbattery GmbHAll claims unpatentablePTAB · Jan 5, 2022 · IPR2020-01211 · APJ Christopher L Crumbley · IPR · Final written decision
Claims 1–12 are unpatentable as obvious over Kobayashi; substitute claims 14–25 are allowed because the cited combinations do not teach the claimed cup casing structure.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In the Decision on Institution, we determined that a person of ordinary skill in the art at the time of the invention of the ’581 patent would have had at least a bachelor’s degree in mechanical engineering, or a similar field, such as materials engineering, chemical engineering, or physics with at least five years of experience in the field of battery design and manufacturing. A person with a master’s degree in one of the above fields could have less practical experience of approximately three years. A person with a PhD could have less practical experience, of about two years. A person with less education but more relevant practical experience may also meet this standard. DI 20 (adopting Petitioner’s proposed definition). For purposes of this Final Written Decision, we maintain our determination from the Decision on Institution because neither party disputes that determination and because the level of skill is consistent with the record. See PO Resp. 6 (stating that “[t]he claims are patentable regardless of which definition is used.”); see generally Pet. Reply.” slip op. at 14
- ExcludeMotion to exclude, deniedMixed
“We are not persuaded that the identified portions of Mr. Gardner’s Supplemental Declaration are improper. In the Petition, Petitioner alleged that a person of ordinary skill in the art would have had reason to substitute known metal foils for the metal conductor plates of Kobayashi in order to reduce the size of inactive materials and improve performance. Pet. 31 (citing Ex. 1003 ¶ 323). In its Response, Patent Owner argued, among other things, that the metal foil lacks the requisite rigidity to support the remaining components of the winding axis core (PO Resp. 22–27, 31), and that because metal connecting plates 4a and 5b are positioned within recesses of insulating plates 8 and 9, replacing the metal connecting plates with metal foils would result in an unreliable connection because the metal foil would become embedded within the grooves of the insulating plates (id. at 28, 31). Mr. Gardner’s supplemental testimony specifically addresses Dr. Peckerar’s and Patent Owner’s concerns that metal foils would be unsuitable in Kobayashi due to their flexibility and thickness as compared to the insulating plates. Ex. 1041 ¶¶ 53 (“the depth of the grooves can be altered in order to better accommodate metal foil output conductors”), 70, 71 (explaining that it is the winding core that provides structure not the output conductor plates), 81, 86 (explaining that the person of ordinary skill in the art could either adjust the size of the output conductors or the depth of the cavities themselves), 87. Therefore, Mr. Gardner’s testimony that the ordinarily skilled artisan would have understood how to account for the technical challenges Patent Owner identified properly responds to arguments raised by Patent Owner in its Patent Owner Response. Accordingly, we deny Patent Owner’s Motion to Exclude Mr. Gardner’s testimony regarding Kobayashi’s modified electrode assembly.” slip op. at 11
- Expert testimonyPetitioner expert creditedDecided for petitioner
“Upon review of Petitioner’s arguments and supporting evidence, we find that Petitioner adequately shows that a person of ordinary skill in the art would have modified Kobayashi to include metal foils in place of its terminal electrode plates. Petitioner explains that one of ordinary skill in the art would have known that metal foil may be used in batteries because the use of metal foil as a conductor is common in the art. Pet. 31, 39 (citing Ex. 1003 ¶¶ 256, 323). Petitioner directs our attention to Kobayashi which details use of metal foil for conducting elements. Id. at 39; see also Ex. 1006 ¶¶ 7, 21, 26, 27 (describing metal foil electrodes). Furthermore, Mr. Gardner testifies that “reducing the thickness of the output conductors has the effect of reducing the ratio of inactive to active components within the cell, which improves energy density . . . . [and is] a well-known goal in the art.” Ex. 1003 ¶ 323. Mr. Gardner further opines that a person of ordinary skill in the art “would be motivated to reduce the thickness of the output conductors of Kobayashi in order to increase energy density within the cell” and “to use metal foils as the output conductors, as this furthers the well-known goal in the art of reducing the size of internal battery components.” Id. We acknowledge Patent Owner’s argument that Mr. Gardner relies on teachings related to conventional battery design—not button cell batteries—and that he discusses considerations “relating to thickness of the electrodes, not of output conductors.” PO Resp. 19–20. But, Mr. Gardner’s testimony similarly relies on passages directed to “basic concepts” of battery operations and, as a whole, focuses on the concept that reducing the thickness of the terminal electrode plates would “maximize the space available inside the cell for active components,” thereby increasing electrode density and improving battery performance. Ex. 1003 ¶ 323 (citing Ex. 1009, 35). According to Mr. Gardner, “these adjustments would be well within the skill of a [person of ordinary skill in the art].” Ex. 1041 ¶¶ 104. We credit Mr. Gardner’s testimony. “Moreover, if a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond that person’s skill.” KSR, 550 U.S. at 401.” slip op. at 21
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“Upon review of Petitioner’s arguments and supporting evidence, we find that Petitioner adequately shows that a person of ordinary skill in the art would have modified Kobayashi to include metal foils in place of its terminal electrode plates. Petitioner explains that one of ordinary skill in the art would have known that metal foil may be used in batteries because the use of metal foil as a conductor is common in the art. Pet. 31, 39 (citing Ex. 1003 ¶¶ 256, 323). Petitioner directs our attention to Kobayashi which details use of metal foil for conducting elements. Id. at 39; see also Ex. 1006 ¶¶ 7, 21, 26, 27 (describing metal foil electrodes). Furthermore, Mr. Gardner testifies that “reducing the thickness of the output conductors has the effect of reducing the ratio of inactive to active components within the cell, which improves energy density . . . . [and is] a well-known goal in the art.” Ex. 1003 ¶ 323. Mr. Gardner further opines that a person of ordinary skill in the art “would be motivated to reduce the thickness of the output conductors of Kobayashi in order to increase energy density within the cell” and “to use metal foils as the output conductors, as this furthers the well-known goal in the art of reducing the size of internal battery components.” Id. We acknowledge Patent Owner’s argument that Mr. Gardner relies on teachings related to conventional battery design—not button cell batteries—and that he discusses considerations “relating to thickness of the electrodes, not of output conductors.” PO Resp. 19–20. But, Mr. Gardner’s testimony similarly relies on passages directed to “basic concepts” of battery operations and, as a whole, focuses on the concept that reducing the thickness of the terminal electrode plates would “maximize the space available inside the cell for active components,” thereby increasing electrode density and improving battery performance. Ex. 1003 ¶ 323 (citing Ex. 1009, 35). According to Mr. Gardner, “these adjustments would be well within the skill of a [person of ordinary skill in the art].” Ex. 1041 ¶¶ 104. We credit Mr. Gardner’s testimony. “Moreover, if a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond that person’s skill.” KSR, 550 U.S. at 401.” slip op. at 21
Patent outcomesUS 9,496,581 unpatentable§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,496,581 - PTAB · Nov 22, 2021 · IPR2021-00103 · APJ Kristina M Kalan · IPR · Institution
The Board instituted IPR on claims 1–13 under all asserted grounds and granted Samsung’s unopposed motion to join IPR2021-00103.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“To institute an inter partes review, we must determine that the information presented in the Petition shows “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). If we determine that a party has filed a petition that warrants institution of an inter partes review, we may join that party to another instituted inter partes review. 35 U.S.C. § 315(c). For the reasons discussed below, after considering the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated a reasonable likelihood of prevailing with respect to at least one claim of the ’276 patent. Thus, we institute an inter partes review. We also join Petitioner as a party to the Applied IPR. At this preliminary stage of the proceeding, we have not made a final determination as to the patentability of any challenged claim or any factual or legal issue underlying the patentability inquiry. Any final determination will be based on the record developed during trial.” slip op. at 2
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“later than one month after the institution date of any inter partes review for which joinder is requested.” 37 C.F.R. § 42.122(b). As the moving party, Petitioner bears the burden of proving that it is entitled to the requested relief. 37 C.F.R. § 42.20(c). In deciding whether to grant a motion for joinder, the Board has considered (1) Petitioner’s explanation why joinder is appropriate, (2) whether any new grounds of unpatentability are asserted in the second petition, (3) what impact, if any, joinder would have on the cost and schedule for the existing proceeding, and (4) whether granting joinder will add to the complexity of briefing and/or discovery. See Consolidated Trial Practice Guide, 76 (Nov. 2019) (https://www.uspto.gov/ TrialPracticeGuideConsolidated) (citing Kyocera Corp. v. Softview LLC, IPR2013-00004, Paper 15 at 4 (PTAB Apr. 24, 2013)).” slip op. at 8
NonePatents in suitUS 7,544,276 - PTAB · Nov 22, 2021 · IPR2021-01090 · APJ Kristina M Kalan · IPR · Institution
The Board instituted IPR on claims 1–13 under all asserted grounds and granted Samsung’s unopposed motion to join IPR2021-00103.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“information presented in the Petition shows “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). If we determine that a party has filed a petition that warrants institution of an inter partes review, we may join that party to another instituted inter partes review. 35 U.S.C. § 315(c). For the reasons discussed below, after considering the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated a reasonable likelihood of prevailing with respect to at least one claim of the ’276 patent. Thus, we institute an inter partes review. We also join Petitioner as a party to the Applied IPR.” slip op. at 2
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“later than one month after the institution date of any inter partes review for which joinder is requested.” 37 C.F.R. § 42.122(b). As the moving party, Petitioner bears the burden of proving that it is entitled to the requested relief. 37 C.F.R. § 42.20(c). In deciding whether to grant a motion for joinder, the Board has considered (1) Petitioner’s explanation why joinder is appropriate, (2) whether any new grounds of unpatentability are asserted in the second petition, (3) what impact, if any, joinder would have on the cost and schedule for the existing proceeding, and (4) whether granting joinder will add to the complexity of briefing and/or discovery. See Consolidated Trial Practice Guide, 76 (Nov. 2019) (https://www.uspto.gov/” slip op. at 8
NonePatents in suitUS 7,544,276 - SNF S.A. v. Solenis Technologies, L.P.Rehearing deniedPTAB · Nov 4, 2021 · IPR2020-01730 · APJ David Cotta · IPR · Rehearing
The Board denied rehearing and, despite finding a reasonable likelihood of obviousness for claims 12 and 13, denied institution because most challenged claims did not meet the threshold and review would be inefficient.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“for an abuse of discretion. 37 C.F.R. § 42.71(c). An abuse of discretion may be found if a decision is based on an erroneous interpretation of law, if a factual finding is not supported by substantial evidence, or if the decision represents an unreasonable judgment in weighing relevant factors. Star Fruits S.N.C. v. United States, 393 F.3d 1277, 1281 (Fed. Cir. 2005); Arnold P’ship v. Dudas, 362 F.3d 1338, 1340 (Fed. Cir. 2004); In re Gartside, 203 F.3d 1305, 1315–16 (Fed. Cir. 2000). The party requesting rehearing has the burden of showing the decision should be modified, which includes specifically identifying all matters the party believes we misapprehended or overlooked. 37 C.F.R. § 42.71(d).” slip op. at 2
- Obviousness (§103) › KSR rationalesNot reached
“Petitioner offers to waive its arguments with respect to invalidity grounds 2 and 3 if we institute inter partes review. Id. This offer makes our exercise of discretion a closer call, but even absent grounds 2 and 3, granting institution would require that we institute on all claims. We have determined that, for a sizeable majority of challenged claims, Petitioner has not demonstrated a reasonable likelihood of prevailing. Under the circumstances presented here, we determine it would not be an efficient use of the Board’s time and resources to institute review. See Chevron, Paper 9 at 10–11; Deeper, Paper 7. Accordingly, we exercise discretion under 35 U.S.C. § 324(a) to decline to institute post-grant review.” slip op. at 11
- Other 314aInstitution denied discretionary otherInstitution denied
“reasons discussed herein and in the Decision, Petitioner has failed to demonstrate a reasonable likelihood that it will prevail with respect to challenged claims 1–11 and 14–21. However, based on the preliminary record, Petitioner has demonstrated a reasonable likelihood that claims 12 and 13 would have been obvious over the cited art. Accordingly, this case presents the question whether we should exercise our discretion to deny institution. Our decision as to whether discretionary denial is warranted is guided by Chevron Oronite Co. v. Infineum USA L.P., IPR2018-00923, Paper 9 (PTAB Nov. 7, 2018) (informative) and Deeper, UAB v. Vexilar, Inc., IPR2018-01310, Paper 7 (PTAB Jan. 24, 2019) (informative). Both of these cases explain that “the Board may consider the number of claims and grounds that meet the reasonable likelihood standard when deciding whether to institute inter partes review under 35 U.S.C. § 314(a).” Chevron, Paper 9 at 10–11; Deeper, Paper 7 at 42. In Chevron, the panel ultimately exercised discretion to deny institution where “Petitioner demonstrate[d], at most, a reasonable likelihood of prevailing with respect to two dependent claims out of a total of twenty challenged claims.” Chevron, Paper 9 at 12. Similarly, in Deeper, the panel exercised discretion to deny institution where Petitioner demonstrated a reasonable likelihood of prevailing with respect to only two out of twenty three challenged claims. Deeper, Paper 7 at 43.” slip op. at 10
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Mixed
“art – selecting values within the ranges disclosed in the prior art to calculate a ratio – did not support institution because Petitioner never explained how or why it selected any of the specific values it used to calculate the claimed ratio. Dec. 13. We concluded that Petitioner’s second use of the ranges disclosed in the art – optimizing within the disclosed ranges – did not support institution because the prior art did not disclose that the ratio of WAMW to % DADMAC was a result effective variable (id. at 17) and because Petitioner had not shown that independently optimizing WAMW and % DADMAC would lead to copolymer having the claimed ratio (id. at 17–20).” slip op. at 4
§ 103 obviousnessDiscretionary denialPatents in suitUS 9,644,320 - Intel Corporation v. Demaray LLCInstitutedPTAB · Oct 29, 2021 · IPR2021-00103 · APJ Kristina M Kalan · IPR · Institution
The Board instituted IPR on all challenged claims and grounds and granted Intel’s unopposed motion to join IPR2021-00103 as an understudy petitioner.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“To institute an inter partes review, we must determine that the information presented in the Petition shows “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). If we determine that a party has filed a petition that warrants institution of an inter partes review, we may join that party to another instituted inter partes review. 35 U.S.C. § 315(c). For the reasons discussed below, after considering the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated a reasonable likelihood of prevailing with respect to at least one claim of the ’276 patent. Thus, we institute an inter partes review. We also join Petitioner as a party to the Applied IPR. At this preliminary stage of the proceeding, we have not made a final determination as to the patentability of any challenged claim or any factual or legal issue underlying the patentability inquiry. Any final determination will be based on the record developed during trial.” slip op. at 2
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“later than one month after the institution date of any inter partes review for which joinder is requested.” 37 C.F.R. § 42.122(b). As the moving party, Petitioner bears the burden of proving that it is entitled to the requested relief. 37 C.F.R. § 42.20(c). In deciding whether to grant a motion for joinder, the Board has considered (1) Petitioner’s explanation why joinder is appropriate, (2) whether any new grounds of unpatentability are asserted in the second petition, (3) what impact, if any, joinder would have on the cost and schedule for the existing proceeding, and (4) whether granting joinder will add to the complexity of briefing and/or discovery. See Consolidated Trial Practice Guide, 76 (Nov. 2019) (https://www.uspto.gov/” slip op. at 8
NonePatents in suitUS 7,544,276
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.