• Nintendo Co., Ltd. / Nintendo Of America Inc. v. Gamevice, Inc.All claims unpatentable
  PTAB · Oct 29, 2024 · IPR2023-00643 · APJ Matthew S Meyers · IPR · Final written decision

  Claims 1–7 are unpatentable as obvious over Willner and Park; the Board did not reach the other instituted grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The main distinction between Petitioner’s ordinarily skilled artisan and Patent Owner’s is that Patent Owner’s definition requires “a mechanical engineering degree” whereas Petitioner’s definition allows for a degree in “mechanical, electrical, or computer engineering.” See Pet. Reply 16 (citing Pet. 13). However, Mr. Kitchen states that he qualifies as one of ordinary skill in the art based on Patent Owner’s proffered definition “even without an undergraduate degree in mechanical engineering” because he has “over 40 years of experience in the design and development of interactive products, including specifically with respect to handheld gaming devices.” Ex. 1033 ¶ 7 (citing Ex. 1002 ¶¶ 24–30). Mr. Kitchen asserts that his experience is in “the same category of products claimed in the ’393 patent and described in the prior art references at issue in this proceeding.” Id. In view of this and based on the complete record before us, we view the parties’ proposals as substantially the same because Petitioner’s proposed definition includes the requisite education Patent Owner’s definition requires. Thus, we find (as we did in the Institution Decision) that Petitioner’s level of ordinary skill in the art is consistent with the level of ordinary skill in the art reflected by the ’393 patent and the prior art of record. See Inst. Dec. 20–21 (citing Okajima, 261 F.3d at 1355). More particularly, we do not agree with Patent Owner that the education component for the level of ordinary skill in the art for computing gaming devices would be limited to just mechanical engineering. We note that, based on the record and evidence before us, our decision and analysis would be the same applying either party’s definition of a person of ordinary skill in the art.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “After reviewing the full record, we determine that it is unnecessary to construe the term “confinement structures,” as it appears in the limitation “a pair of confinement structures” to reach a determination in this proceeding. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). However, we will address the parties’ dispute regarding whether the prior art discloses or teaches physical component(s) that hold(s) a computing device within our merits analysis below. The parties do not dispute the construction of any other claim terms and we find that no other terms require express construction to resolve the controversy between the parties. Accordingly, we do not construe any other claim terms expressly. See Realtime Data, 912 F.3d at 1375 (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., 200 F.3d at 803).” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “First, the test for obviousness “is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference, . . . but rather whether ‘a skilled artisan would have been motivated to combine the teachings of the prior art references to achieve the claimed invention.’” Allied Erecting & Dismantling Co. v. Genesis Attachments, LLC, 825 F.3d 1373, 1381 (Fed. Cir. 2016); see also Pet. Reply 11–12 (arguing the same). Second, we disagree with Patent Owner’s assertion that the proposed combination would fail “to retain[] computing device 10 in position during normal user operation” because Park’s adjustable bridge “configuration does not allow mobile phone (1) to be seated for stability in the device.” PO Resp. 20 (citing Ex. 1004 ¶ 42; Ex. 2004 ¶ 68). At the outset, we note that Patent Owner’s argument mischaracterizes the disclosure of Park. Instead, we find Park discloses that a “basic configuration of [Park’s] game pad device for a mobile phone according to the present invention” “sufficiently allows mobile phone (1) to be mounted on the device according to the present invention and used.” Ex. 1004 ¶¶ 25, 41. Although Park discloses that “mobile phone (1) may come loose during gaming or become detached in severe cases” (id. ¶ 41), we do not view this disclosure to otherwise negate Park’s teaching that its adjustable bridge (30,40) “sufficiently allows mobile phone (1) to be mounted on the device according to the present invention and used.” Id. We credit Mr. Kitchen’s declaration testimony to that effect. See Ex. 1033 ¶ 47 (declaring that one of ordinary skill in the art would have “understood this disclosure to mean that a computing device (mobile phone) would have been secured by the device for normal use . . . as part of a handheld gaming device.”).” slip op. at 24

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “We agree with Petitioner and find more credible Mr. Kitchen’s opinion regarding “normal user operation.” In doing so, we credit Mr. Kitchen’s opinion that Willner’s sidewalls would “function to secure the sides of the computing device and hold it in place” and, “[i]n the combination, Park’s bridge would be adjusted to reduce the length of the bridge and thereby ‘mount’ a computing device by having Willner’s side walls (confinement structures) ‘apply pressure’ to opposing sides of the computing device.” Ex. 1002 ¶¶ 154–156 (citing Ex. 1004 ¶¶ 38–41). We note that the ’393 patent operates in a similar manner using a sufficient compressive load to hold a computing device. More particularly, the ’393 patent discloses that [t]he expansion and contraction of the distance between the pair of confinement structures 316, facilitates placement of the computing device 302 between the pair of confinement structures 316, the application of sufficient compressive load being placed on the computing device 302 to securely hold the computing device between the pair of confinement structures 316. Ex. 1001, 10:11–20. Thus, we find Mr. Kitchen’s opinion credible and supported by the complete record. Accordingly, we find that Petitioner has proven, by a preponderance of the evidence, that the combination of Willner and Park teaches or suggests “a pair of confinement structures,” as recited by limitation 1[b][1].” slip op. at 22

  Patent outcomesUS 10,391,393 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,391,393
• Masimo Corporation v. Apple Inc.No claims unpatentable
  PTAB · Oct 15, 2024 · IPR2023-00745 · APJ Robert L Kinder · IPR · Final written decision

  Claims 1–4 and 8–22 were not shown unpatentable because Mills did not disclose the required embedded structure and Markel combined with Mills did not teach it; the revised motion to amend was dismissed as moot.

  RulingsFinal written decision

  • PTAB / AIA Trials › Motions to amend / substitute claimsNot reached

    “Patent Owner’s Revised Contingent Motion to Amend asserts that in “the event the Board finds at least one challenged [Revised Motion to Amend] claim unpatentable, [Patent Owner] respectfully requests that the Board grant this Motion with respect to the corresponding proposed substitute claim(s).” Paper 27, 1. Because we determine that Petitioner has not established that any of the challenged claims 1–4 and 8–22 are unpatentable, Patent Owner’s Revised Contingent Motion to Amend is moot.” slip op. at 61

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner’s proposed level of ordinary skill in the art is somewhat broader in both education and proposed work experience. Patent Owner’s proposed work experience is somewhat vague and potentially outside the scope of the claimed invention. For example, the requirement that the person of ordinary skill in the art have experience with the “capture and processing of data or information, including but not limited to physiological information,” would seemingly encompass data processing areas that do not relate to the scope of the claimed invention. We adopt Petitioner’s level of the level of ordinary skill in art because it is consistent with the level of ordinary skill reflected in the prior art references of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (recognizing that the prior art itself may reflect an appropriate level of skill in the art). Our analysis and the end result are the same under either proposed definition.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “structure where a lead is embedded in a portion of the enclosure from other embodiments where a lead is merely positioned against or in parallel contact with a portion of the enclosure. See Ex. 2003 ¶¶ 36–37. The Specification describes distinct embodiments such as “lead 472 of the heart sensor can be positioned against the back surface of bezel 460,” or “[a]lternatively, lead 472 can be placed within the thickness of bezel 460 (e.g., in a pocket within the bezel wall), but underneath the outer surface of the bezel.” Ex. 9:44–48. We agree with Patent Owner, and Dr. Kenny, that “[t]his passage distinguishes a lead that is embedded in a portion of the enclosure from a lead that is merely ‘positioned against’ or in parallel contact with a portion of the enclosure.” PO Resp. 6–7 (citing Ex. 2003 ¶¶ 33–35). See also Ex. 2008, 31:10–33:18, 109:18–110:19 (Petitioner’s expert, Mr. Oslan, suggesting that a first component or object in parallel contact with and positioned under a second component or object would not necessarily indicate that the first component or object is embedded in the second component or object). Similarly, we also agree that “the claims of the ’257 use the term ‘embedded in’ while also using the word ‘embedded’ in other contexts, which” indicates distinct claim scope for “the term ‘embedded in,’” versus “the broader term ‘embedded.’” Ex. 2003 ¶ 38. For instance, claim 9 distinctly requires “embedded with,” which is a broader term that, according to Dr. Kenny, encompasses embodiments where a lead may be adjacent/parallel to the first portion of the enclosure. Id.” slip op. at 18

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “under the exterior of the first portion” (see Pet. 21–22, 24–25; Pet. Reply 4); and (3) leaf spring 62 is embedded in housing 12 and electrode 14 (see Pet. 22–24). None of Petitioner’s mappings disclose every element of claim 1 and Petitioner improperly jumps between these various mappings without fully examining a single mapping for each and every limitation of claim 1. See Pet. 18–25. In essence, Petitioner invites the Board to piece together a single theory that meets all claim elements from these disparate theories that each require distinct structure within Mills. See Amazon.com, Inc., et al. v. Avago Technologies General IP (Singapore) PTE. LTD., IPR2017-01112, Paper 11, at 13 (PTAB Aug. 23, 2017) (“Petitioner is inviting us to assume the role of archeologist of the record, which invitation we decline.”).” slip op. at 36

  Patent outcomesUS 10,076,257 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,076,257
• Masimo Corporation v. Apple Inc.All claims unpatentable
  PTAB · Oct 1, 2024 · IPR2023-00734 · APJ Ken B Barrett · IPR · Final written decision

  Claims 1–19 are unpatentable as obvious under §103 over the combinations of prior art identified in the eight grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We discern no material difference between the parties’ definitions. Cf. PO Resp. 14 (Patent Owner stating that “[t]he analysis presented [in the Response] remains unchanged even if [Petitioner’s proposed] skill level is applied.”). Petitioner’s definition is consistent with the level of ordinary skill reflected in the prior art references of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (recognizing that the prior art itself may reflect an appropriate level of skill in the art). For purposes of this decision, we apply Petitioner’s definition of the person of ordinary skill in the art. We note, however, that were we to adopt Patent Owner’s assessment, the outcome of this Decision would be the same.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner proposes constructions for certain terms concerning the cover material—“a cover formed from a dielectric material,” “a transparent substrate,” and “a cover comprising a non-conductive material”—and window terms such as “defines at least one window” and “window defined.” Pet. 7–10. Patent Owner states that it does not take a position regarding Petitioner’s offered constructions. PO Resp. 15. On this record and for purposes of this decision, we determine that no claim terms require express construction.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Patent Owner argues that a person of ordinary skill in the art would not have been motivated to make the proposed combination and would not have had a reasonable expectation of success in making that combination. See, e.g., PO Resp. 34–35. These arguments are not persuasive at least because Patent Owner’s motivation requirement and implied definition of success are not sufficiently tied to the claimed invention. See, e.g., Elekta Ltd. v. ZAP Surgical Sys., Inc., 81 F.4th 1368, 1375 (Fed. Cir. 2023) (“Reasonable expectation of success refers to the likelihood of success in combining references to meet the limitations of the claimed invention.”). Patent Owner would require a successful outcome to be “quick and efficient wireless charging.” See PO Resp. 34–35. In making these arguments, Patent Owner is improperly superimposing the purported goals and purpose of Honda, the secondary reference, onto the ordinary artisan. See, e.g., id. at 41–45. However, the intended purpose of a prior art reference does not control the obviousness inquiry. Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 800 (Fed. Cir. 2021). Our reviewing court recently explained: The [motivation-to-combine] inquiry is not whether a relevant artisan would combine a first reference’s feature with a second reference’s feature to meet requirements of the first reference that are not requirements of the claims at issue. A contrary view would run counter to established principles, including that the claim defines the invention whose obviousness is being assessed and that a skilled artisan may be motivated to combine particular features of different references, e.g., to secure some benefits at the expense of others, even when bodily incorporation would be impossible or inadvisable. Axonics, Inc. v. Medtronic, Inc., 73 F.4th 950, 957 (Fed. Cir. 2023). Petitioner’s combination yields the benefit of the addition of wireless charging capability to a biosensor device. A person of ordinary skill in the art would find that benefit to be a motivating reason to make the combination. See, e.g., Ex. 1003 ¶ 176 (Dr. Duckworth’s motivation opinion based, in part, on “Kotanagi’s own statement that its rechargeable battery can be recharged ‘in a contactless state.’”); id. ¶ 149 (Dr. Duckworth describing a motivating factor in “Honda’s teaching of a wireless receive coil near a rear opening similar to that taught in Kotanagi (where both Honda’s and Kotanagi’s openings have a cover glass)” and opining that, in the proposed modifications, “the resulting magnetic flux would pass through the cover glass, as taught by Honda”); see also Ex. 1052, 45:16–46:2 (Dr. Anthony, on cross-examination and after being asked whether wireless charging is an improvement over wired charging for a consumer watch, responding that “in some instances it could be, and in others it may not be.”). And, as to a reasonable expectation of success, Patent Owner admits that “Petitioner has presented a device configuration in which a wireless charging coil could be provided in Kotanagi’s through hole 22.” PO Resp. 54; see also id. at 3 (Patent Owner arguing that “the size of coil that could be provided in this allegedly available space would be small and would significantly limit the amount of wireless power signal transmission,” but not arguing that even Patent Owner’s purported size-limited configuration would be inoperative); see, e.g., Ex. 1003 ¶¶ 155–156 (Dr. Duckworth credibly testifying that a person of ordinary skill in the art would have had a reasonable expectation of success in combining the teachings of Kotanagi and Honda).” slip op. at 27

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “would limit the size and positioning of a charging coil, and that the purported combination, as characterized by Patent Owner, would result in a “significantly degrad[ed] wireless charging efficiency” of Honda’s coil. PO Resp. 41–42; see id. at 36–45, id. at 55 (Patent Owner arguing that, “given the size restrictions imposed by Kotanagi,” the housing and cover glass cannot be expanded to allow for a larger coil). Patent Owner further argues that the combination would have to be configured a certain way and that the resulting configuration would “would frustrate Honda’s goals and intended purpose.” Id. at 37–38, 40–41; see also, e.g., id. at 43–44 (Patent Owner arguing that the combination, as characterized by Patent Owner, would inject noise and interference that are contrary to Honda’s goals of quick and efficient power transmission). We do not agree with this line of argument. “The test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference; nor is it that the claimed invention must be expressly suggested in any one or all of the references.” In re Keller, 642 F.2d 413, 425 (CCPA 1981). The person of ordinary skill in the art is not compelled to blindly follow the teaching of one prior art reference over the other without the exercise of independent judgment. See Lear Siegler, Inc. v. Aeroquip Corp., 733 F.2d 881, 889 (Fed. Cir. 1984). As the Supreme Court recognized in KSR, “[a] person of ordinary skill is also a person of ordinary creativity, not an automaton.” 550 U.S. at 421. Dr. Duckworth persuasively testifies that, “if, under the relevant engineering trade-offs, a POSITA wanted to increase charging speed, consistent with Honda’s teachings, Honda would have provided the motivation and information to either re-size or reshape Kotanagi’s protrusion and/or cover glass to provide for a larger coil.” Ex. 1060 ¶ 346; see also Ex. 1003 ¶¶ 157–159 (“[I]t would have been feasible to make the second modification option discussed above: to enlarge Kotanagi’s opening and cover glass to make room for a coil behind the cover glass, surrounding the LED and PD.”); Ex. 2039, 47:5–10 (“[A] POSITA would view Honda’s teachings to either modify Kotanagi to position wireless charging coil behind Kotanagi’s cover glass or enlarge the Kotanagi’s opening and cover glass to make room for a coil behind the cover glass.”); PO Resp. 44 (Patent Owner admitting that Honda teaches that metal is inferior for power transmission and “[t]his is precisely why Honda seeks to provide glass for its rear cover.”). And, although the references express certain goals, Patent Owner does not adequately identify any disclosure in either reference that disparages Petitioner’s articulated combination. See DePuy Spine, Inc. v. Medtronic Sofamor Danek, Inc., 567 F.3d 1314, 1327 (Fed. Cir. 2009) (“A reference does not teach away, however, if it merely expresses a general preference for an alternative invention but does not ‘criticize, discredit, or otherwise discourage’ investigation into the invention claimed.”). Even if, as Patent Owner argues, the proposed combination would not quickly charge the device, this is not dispositive. Dr. Anthony agrees that “[d]evices, depending on their use and their function, can benefit from either fast charge or trickle charge or a little bit of charge.” Ex. 1052, 19:3–6. “It’s not necessary to show that a combination is ‘the best option, only that it be a suitable option.’” Intel Corp., 21 F.4th at 800 (quoting PAR Pharm., Inc. v. TWI Pharms., Inc., 773 F.3d 1186, 1197–98 (Fed. Cir. 2014)); see also In re Mouttet, 686 F.3d 1322, 1334 (Fed. Cir. 2012) (“[J]ust because better alternatives exist in the prior art does not mean that an inferior combination is inapt for obviousness purposes.”); Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“[A] given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.”). Based upon the final record before us, we find that a person of ordinary skill in the art would consider even a slow charging configuration to be a suitable option.” slip op. at 29

  Patent outcomesUS 10,942,491 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,942,491
• New Balance Athletics, Inc. v. Nike, Inc.Institution denied
  PTAB · Sep 26, 2024 · IPR2024-00778 · APJ Josiah C Cocks · IPR · Institution

  The Board denied institution because the petition did not show a reasonable likelihood of prevailing on any challenged claim: Clark and Mills each failed to disclose required limitations.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied

    “partes review may not be instituted unless the information presented in the Petition shows that “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a); see also 37 C.F.R § 42.4(a) (“The Board institutes the trial on behalf of the Director.”).” slip op. at 2

  • BurdenDecided for patent owner

    “in a continuous fashion, as shown in Figure 5, and this will include the portion that will be used for the upper (the textile element) and the material that is trimmed away (the surrounding textile structure)” (citing Ex. 1003 ¶¶ 124–125)). Notably absent, however, from the above-identified portions of the Petition and testimony of Dr. Bookstein is any reference to material that is “trimmed away” or why any such material is regarded as surrounding a textile element, or any other component of Clark. In a later portion of the Petition addressing the second clause of limitation 1a, Petitioner makes reference to Clark’s column 4, lines 61 through 66, as disclosing a “trimming process.” Pet. 23–24 (citing Ex, 1003 ¶ 128). That portion of Clark generally expresses that “the exposed edge of the upper may be trimmed in any desired outline . . . and the trimmed edge may be bound or finished as desired.” E. 1004, 4:61–66. We agree with Patent Owner that, to the extent Petitioner and Dr. Brookstein rely on that portion of Clark to account for the first clause of limitation 1a, Petitioner does not meaningfully explain why Clark’s disclosure of “the potential trimming of an ‘exposed edge’ (singular)” of any textile element means that the textile element is regarded as “hav[ing] been knitted with a surrounding textile structure.” See Prelim. Resp. 15–16 (citing Ex. 2003 ¶ 38). We credit Dr. Pastore’s testimony to that end, over that of Dr. Brookstein (see, e.g., Ex. 1003 ¶ 128), as we find that Dr. Pastore’s testimony is more consistent with Clark’s actual disclosure and what it would have conveyed to one of ordinary skill in the art.” slip op. at 19

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner states, “[f]or purposes of this Preliminary Response only, Nike applies New Balance’s proposed level of skill in the art.” Prelim. Resp. 13. Based on this record, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’749 patent and the asserted prior art, and we apply it in our patentability evaluations below.” slip op. at 11

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “in a continuous fashion, as shown in Figure 5, and this will include the portion that will be used for the upper (the textile element) and the material that is trimmed away (the surrounding textile structure)” (citing Ex. 1003 ¶¶ 124–125)). Notably absent, however, from the above-identified portions of the Petition and testimony of Dr. Bookstein is any reference to material that is “trimmed away” or why any such material is regarded as surrounding a textile element, or any other component of Clark. In a later portion of the Petition addressing the second clause of limitation 1a, Petitioner makes reference to Clark’s column 4, lines 61 through 66, as disclosing a “trimming process.” Pet. 23–24 (citing Ex, 1003 ¶ 128). That portion of Clark generally expresses that “the exposed edge of the upper may be trimmed in any desired outline . . . and the trimmed edge may be bound or finished as desired.” E. 1004, 4:61–66. We agree with Patent Owner that, to the extent Petitioner and Dr. Brookstein rely on that portion of Clark to account for the first clause of limitation 1a, Petitioner does not meaningfully explain why Clark’s disclosure of “the potential trimming of an ‘exposed edge’ (singular)” of any textile element means that the textile element is regarded as “hav[ing] been knitted with a surrounding textile structure.” See Prelim. Resp. 15–16 (citing Ex. 2003 ¶ 38). We credit Dr. Pastore’s testimony to that end, over that of Dr. Brookstein (see, e.g., Ex. 1003 ¶ 128), as we find that Dr. Pastore’s testimony is more consistent with Clark’s actual disclosure and what it would have conveyed to one of ordinary skill in the art.” slip op. at 19

  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,266,749
• Masimo Corporation v. Apple Inc.Some claims unpatentable
  PTAB · Sep 23, 2024 · IPR2023-00634 · APJ Ken B Barrett · IPR · Final written decision

  Claims 1–5, 9, 10, 14, 15, and 17–20 are unpatentable as obvious; claims 6–8, 11–13, and 16 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We discern no material difference between the parties’ definitions. Cf. PO Resp. 16 (Patent Owner stating that “[t]he analysis presented [in the Response] remains unchanged even if [Petitioner’s proposed] skill level is applied.”). Petitioner’s definition is consistent with the level of ordinary skill reflected in the prior art references of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (recognizing that the prior art itself may reflect an appropriate level of skill in the art). For purposes of this decision, we apply Petitioner’s definition of the person of ordinary skill in the art. We note, however, that were we to adopt Patent Owner’s assessment, the outcome of this Decision would be the same.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We find Patent Owner’s position to be persuasive. Not only are the cover and biosensor module recited separately in the list of components of the device of claim 9, we also agree that the “disposed over” claim language establishes the configuration of two separate components relative to each other. Additionally, the claim language that requires the cover to be “configured to pass optical signals to and from the biosensor module” supports an interpretation where the cover is separate from the biosensor module, otherwise it seemingly would be passing signals to and from itself. The understanding that the cover is separate from the biosensor module in claim 9 is consistent with the Specification’s description of an embodiment that tracks the language of claim 9 and speaks of the two elements as separate, individual components, namely the statement that “[a] biosensor module may be disposed within the opening of the housing” and “[a] rear cover may be disposed over the biosensor module.” Ex. 1001, 2:59–62; see also id. at 2:56 (the same paragraph beginning with “Some embodiments . . .”). Petitioner asserts that its proposed construction is consistent with the claim language, arguing that “the word ‘cover’ naturally suggests that its role is to be ‘disposed over,’” and that “[a] cover can be part of a module just as a clear plastic lid can be both disposed over, and part of, a container, allowing a view of its contents.” Pet. Reply 4. We disagree with Petitioner’s analogy. Although a clear lid may be over a jar, it cannot be said to be “disposed over” the container consisting of both the jar and the lid because it then would be disposed over itself.” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Patent Owner argues that the proposed combination will result in a configuration “that is contrary to Honda’s teachings and its stated goals and purpose of achieving quick and efficient wireless charging.” PO Resp. 30– 31. Patent Owner’s focus on these properties is misplaced. We agree with Petitioner that characteristics such as charging speed and efficiency are not claimed. See Pet. Reply 1 (“[T]he ’783 patent does not disclose, let alone claim, sizing or other details [Patent Owner] Apple asserts are necessary for successful wireless charging.”); id. at 6 (“[C]harging speed [is] not claimed.”). Rather, the claim drafter utilized broad language to encompass a biosensor device having the capability to wireless charge through a cover— both good configurations and those that Patent Owner argues are inferior. And, even if the proposed combination does not yield a commercially viable product, as Patent Owner implies, the broad claim scope would hinder an innovating competitor’s ability to utilize and test that purported less desirable combination on the way to development of a better device. Patent Owner argues that a person of ordinary skill in the art would not have been motivated to make the proposed combination and would not have had a reasonable expectation of success in making that combination. See, e.g., PO Resp. 31. These arguments are not persuasive at least because Patent Owner’s motivation requirement and implied definition of success are not sufficiently tied to the claimed invention. See, e.g., Elekta Ltd. v. ZAP Surgical Sys., Inc., 81 F.4th 1368, 1375 (Fed. Cir. 2023) (“Reasonable expectation of success refers to the likelihood of success in combining references to meet the limitations of the claimed invention.”). Patent Owner would require a successful outcome to be “quick and efficient wireless charging.” See PO Resp. 31. In making these arguments, Patent Owner is improperly superimposing the purported goals and purpose of Honda, the secondary reference, onto the ordinary artisan. See, e.g., id. at 37–41. However, the intended purpose of a prior art reference does not control the obviousness inquiry. Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 800 (Fed. Cir. 2021). Our reviewing court recently explained: The [motivation-to-combine] inquiry is not whether a relevant artisan would combine a first reference’s feature with a second reference’s feature to meet requirements of the first reference that are not requirements of the claims at issue. A contrary view would run counter to established principles, including that the claim defines the invention whose obviousness is being assessed and that a skilled artisan may be motivated to combine particular features of different references, e.g., to secure some benefits at the expense of others, even when bodily incorporation would be impossible or inadvisable. Axonics, Inc. v. Medtronic, Inc., 73 F.4th 950, 957 (Fed. Cir. 2023). Petitioner’s combination yields the benefit of the addition of wireless charging capability to a biosensor device. A person of ordinary skill in the art would find that benefit to be a motivating reason to make the combination. See, e.g., Ex. 1003 ¶ 121 (Dr. Duckworth’s motivation opinion based, in part, on “Kotanagi’s own statement that its rechargeable battery can be recharged ‘in a contactless state.’”); id. ¶ 127 (Dr. Duckworth’s describing a motivating factor in Honda’s explanation “that this [charging] station passes wireless power to the wireless charging receiving coil through a rear cover glass (similar to that of Kotanagi), using the physics of induced currents and magnetic flux.”); see also Ex. 1052, 45:16–46:2 (Dr. Anthony, on cross-examination and after being asked whether wireless charging is an improvement over wired charging for a consumer watch, responding that “in some instances it could be, and in others it may not be.”). And, as to a reasonable expectation of success, Patent Owner admits that “Petitioner has presented a device configuration in which a wireless charging coil could be provided in Kotanagi’s through hole 22.” PO Resp. 56; see also id. at 3 (Patent Owner arguing that “the size of coil that could be provided in this allegedly available space would be small and would significantly limit the amount of wireless power signal transmission,” but not arguing that even Patent Owner’s purported size-limited configuration would be inoperative); see, e.g., Ex. 1003 ¶¶ 130–133 (Dr. Duckworth credibly testifying that a person of ordinary skill in the art would have had a reasonable expectation of success in combining the teachings of Kotanagi and Honda).” slip op. at 31

  Patent outcomesUS 10,627,783 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,627,783
• Fervo Energy Co. v. Ormat Technologies Inc.Institution denied
  PTAB · Sep 18, 2024 · IPR2024-00665 · APJ Josiah C Cocks · IPR · Institution

  Institution denied because Petitioner failed to show a reasonable likelihood of proving any challenged claim unpatentable under the proposed obviousness grounds.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied

    “II. ANALYSIS A. Principles of Law A petition must show how the construed claims are unpatentable under the statutory grounds it identifies. 37 C.F.R. § 42.104(b)(4). Petitioner bears the burden of demonstrating a reasonable likelihood that it would prevail with respect to at least one challenged claim for a petition to be granted. 35 U.S.C. § 314(a).” slip op. at 8

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art In determining the level of skill in the art, we consider the type of problems encountered in the art, the prior art solutions to those problems, the rapidity with which innovations are made, the sophistication of the technology, and the educational level of active workers in the field. Custom Accessories, Inc. v. Jeffrey-Allan Indus. Inc., 807 F.2d 955, 962 (Fed. Cir. 1986); Orthopedic Equip. Co. v. U.S., 702 F.2d 1005, 1011 (Fed. Cir. 1983). Petitioner contends the following assessment in connection with a person of ordinary skill in the art: The Challenged Claims pertain to a method of recovering geothermal heat. However, “[m]any of the techniques are derived from oil and gas industry.” EX1001 at 4:23-24. Accordingly, here, a person of ordinary skill in the art (“POSITA”) is a person with a Bachelor’s degree, Master’s degree, and/or Ph.D. in Chemical Engineering, Petroleum Engineering, Energy Resource Engineering, or the like, or at least five years of experience engineering, drilling, and constructing wells. Furthermore, a person with less formal education but more experience, or more formal education but less experience, could also have met the relevant standard for a POSITA. Pet. 16–17 (citing Ex. 1004 ¶¶ 34–36). Patent Owner does not offer its own assessment of a POSITA. For purpose of this Decision, we adopt Petitioner’s assessment.” slip op. at 9

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesOther

    “own for any claim term. Patent Owner does, however, note that “claim element 9c[13] includes the terms ‘means for,’ which are presumed to invoke 13 The referenced “claim element 9c” reads in-part “Means for producing a water density difference and a pressure difference between said first means-plus-function treatment under Section 112.” Prelim. Resp. 17 (citing Samsung Electronics Co., Ltd. v. Power2B Inc., IPR2022-01378, Paper 12 at 11 (PTAB Mar. 15, 2023) (citing Williamson v. Citrix Online, LLC, 792 F.3d 1339, 1348 (Fed. Cir. 2015) (en banc in relevant part))). Patent Owner further submits that “[u]nder Rule 104(b)(3),[14] Petitioner had an obligation to provide a construction of claim element 9c that includes both the claimed function and the specific portions of the specification that describe the structure, material, or acts corresponding to each claimed function.” Id. We agree with Patent Owner that the term “means for” when appearing in a claim triggers a rebuttable presumption that treatment under § 112 applies. On the record before us, however, Petitioner has not explained why the noted presumption has been rebutted or does not apply, and has not provided a construction of the pertinent “means for” term in the Petition in contradiction to the requirements of 37 C.F.R. § 104(b)(3).” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableNot shown unpatentable

    “While it is certainly the case that “a prior art reference is relevant for all that it teaches to those of ordinary skill in the art,” see In re Fritch, 972 F.2d 1260, 1264-65 (Fed. Cir. 1992), it is incumbent on a petitioner, in advancing a permissible theory of obviousness, to explain why a skilled artisan would recognize to pick and choose certain aspects of a reference and combine them with other aspects of the reference, particularly so where the reference itself does not suggest such combination. See In re Hedges, 783 F.2d 1038, 1041 (Fed. Cir. 1986) (“It is impermissible within the framework of section 103 to pick and choose from any one reference only so much of it as will support a given position, to the exclusion of other parts necessary to the full appreciation of what such reference fairly suggests” ) (citation and inner quotes omitted). Here, Petitioner’s oscillation between different embodiments of Rinaldi in an attempt to reach the requirements of claim 1 is not adequately explained, and more closely resembles impermissible hindsight. See Metalcraft of Mayville, Inc. v. The Toro Co., 848 F.3d 1358, 1367 (Fed. Cir. 2017). (“[W]e cannot allow hindsight bias to be the thread that stitches together prior art patches into something that is the claimed invention.”). In sum, we determine that Petitioner has not shown a reasonable likelihood of prevailing in its assertion that claim 1 is unpatentable as a part of Petitioner’s proposed Ground 1.” slip op. at 18

  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 7,320,221
• Masimo Corporation v. Apple Inc.No claims unpatentable
  PTAB · Sep 11, 2024 · IPR2023-00664 · APJ Robert L Kinder · IPR · Final written decision

  Claims 1–24 were not determined unpatentable because the cited combinations failed to teach or suggest the claimed selectable widget functionality and lacked a coherent rationale to combine.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that: A POSITA [person of ordinary skill in the art] of the ’352 patent would have had at least a bachelor’s degree in a discipline related to human-computer interaction, such as Human Factors, Computer Science, Computer Engineering, or an equivalent discipline, and at least two years of experience working with touchscreen user interfaces. More education could substitute for less work experience, and vice-versa. Pet. 12 (citing Ex. 1003 ¶ 34).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “In our Decision to Institute, we construed “input that is directed to a portion of” a user interface. Paper 8, at 9; see also Pet. 24–25. Because this interpretation is not necessary for our final determination, we do not repeat it here.” slip op. at 9

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “Chae’s annotated Figure 6(b) “illustrates unlocking the second SIM (SIM2) according to the method for operating a mobile terminal.” Ex. 1005 ¶ 19. Ex. 1005, Fig. 6(b). Although Figure 6(b) “displays different items” (Ex. 1005 ¶ 109) such as the depictions of people (Lauran and Chris) and partly cloudy weather, Chae does not suggest that selecting these graphics causes display of an application. See PO Resp. 21. Petitioner contends that an ordinary artisan would have understood that selecting one of Chae’s graphics items must cause display of an application (see Pet. 55; Pet. Reply 11), but Chae does not teach or suggest this feature. As Dr. Cockburn persuasively testifies, “nothing in Chae indicates that the icons displayed in Figure 6(b) are dynamic or change in any way in response to content in the corresponding applications, and that the icons when selected causes display of the corresponding applications.” Ex. 2003 ¶ 46. The mere possibility that Chae’s generic graphical objects could perform a function is speculation because nothing in Chae teaches that selecting that graphical object would display a corresponding application. See id. The display of icons in Figure 6(b) does not inform the person of ordinary skill in the art whether the item has to indicate or contain content from an underlying application, and also whether it is selectable to get to that corresponding application as required by the claims. See Tr. 32:21–33:3. Petitioner’s reliance of the testimony of Dr. Rosenberg (see Ex. 1003 ¶ 91) is unpersuasive because Dr. Rosenberg merely restates the Petitioner’s assertions without reliance on persuasive evidence of record. See Xerox Corp. v. Bytemark, Inc., IPR2022-00624, at 5 (Feb 10, 2023) (Vidal, Dir.) (“[T]he Board was correct in giving little weight to Petitioner’s expert because the expert declaration merely offered conclusory assertions without underlying factual support and repeated, verbatim, Petitioner’s conclusory arguments.”). When addressing Chae’s three graphics in Figure 6(b) during cross-examination, Dr. Rosenberg testifies that “[t]hey’re not a numbered element, so they’re not spoken about specifically those three ones”). Ex. 2005, 56:9–14, 54:21–22 (“Chae doesn’t talk about the weather icon”). Further, the final record does not support Dr. Rosenberg’s testimony that a person of ordinary skill in the art would have understood that “part of the well-known functionality of widgets was that selecting a widget would cause ‘display of an application corresponding to the respective user interface object.’” Ex. 1003 ¶ 91. None of the references relied upon by Petitioner discloses this alleged “well-known functionality of widgets,” nor does the evidence of record support any industry standard usage of the term widget in the appropriate timeframe. See Ex. 2003 ¶¶ 46–48. Petitioner has also not persuasively shown that selections of Chae’s SIM card icons result in the display of an application as claimed. See Ex. 1005 ¶¶ 152–154, Fig. 22; see also Tr. 43:14–17 (“the claimed interface object causes display of the corresponding application, but selection of this paragraph 152, Figure 22 widget causes selection of something different, a sim environment.”). We find Patent Owner’s position more persuasive, when Chae uses the word widget, it is not using that word to refer to something that launches into an application, but instead Chae’s widgets show use-state information related to a SIM environment. See Ex. 1005 ¶¶ 152–154; Tr. 33:3–12. Specifically, Chae discloses “widgets that show use-state information of the first and second SIMs (SIM1 and SIM2),” and “when a user selects one of [the] widgets,” it “unlocks the SIM corresponding to the dragged widget.” Ex. 1005 ¶¶ 152, 153, Fig. 3 (unlocking SIM displays home screen customized to unlocked SIM). Chae does not support that these widgets relate to the graphic items in its Figure 6(b), nor does Chae explain how its widgets could be understood as the claimed “user interface objects” of the widget screen user interface. As explained persuasively by Dr. Cockburn, “the only widgets that are described in Chae are widgets relating to the use state of the multiple SIM cards,” and “[t]hese widgets described in Chae do not correspond to applications and thus do not cause display of applications when the widgets are selected.” Ex. 2003 ¶ 46 (quoting Ex. 1005 ¶ 152).” slip op. at 25

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Based on the final record before us, we conclude that Petitioner has not persuasively shown that the combination of prior art teaches the required widget limitation of “a respective user interface object . . . when selected, causes display of an application corresponding to the respective user interface object” as recited in claim 1. Petitioner relies on Chae’s Figure 6(b), which is reproduced below: Chae’s annotated Figure 6(b) “illustrates unlocking the second SIM (SIM2) according to the method for operating a mobile terminal.” Ex. 1005 ¶ 19. Ex. 1005, Fig. 6(b). Although Figure 6(b) “displays different items” (Ex. 1005 ¶ 109) such as the depictions of people (Lauran and Chris) and partly cloudy weather, Chae does not suggest that selecting these graphics causes display of an application. See PO Resp. 21. Petitioner contends that an ordinary artisan would have understood that selecting one of Chae’s graphics items must cause display of an application (see Pet. 55; Pet. Reply 11), but Chae does not teach or suggest this feature. As Dr. Cockburn persuasively testifies, “nothing in Chae indicates that the icons displayed in Figure 6(b) are dynamic or change in any way in response to content in the corresponding applications, and that the icons when selected causes display of the corresponding applications.” Ex. 2003 ¶ 46. The mere possibility that Chae’s generic graphical objects could perform a function is speculation because nothing in Chae teaches that selecting that graphical object would display a corresponding application. See id. The display of icons in Figure 6(b) does not inform the person of ordinary skill in the art whether the item has to indicate or contain content from an underlying application, and also whether it is selectable to get to that corresponding application as required by the claims. See Tr. 32:21–33:3.” slip op. at 24

  Patent outcomesUS 11,106,352 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,106,352
• Hangzhou Taihe Trading Co., Ltd. / Ningbo Likeju Trading Co., Ltd. v. Ep Family Corp.Other
  PTAB · Aug 16, 2024 · IPR2023-00658 · APJ Scott A Daniels · IPR · Final written decision

  The Board canceled original claim 1, denied the proposed substitute claim as indefinite under § 112, and did not reach the asserted obviousness grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We have, on the complete record now before us, mainly the testimony of Petitioner’s declarant, Mr. Hatch, who testifies that the designer of ordinary skill in the art would be a person who has a bachelor’s degree in furniture design or an equivalent field or alternatively two years of practical experience designing furniture . . . [which] is appropriate given the relatively simple nature of the design at issue, which involves little more than two boards forming a tabletop. Ex. 1002 ¶¶ 34–35. Based on the complete record, we adopt Petitioner’s articulation of a designer of ordinary skill as it is supported by the testimony of Mr. Hatch. Id. ¶¶ 33–38. We also note that, based on the complete trial record, our” slip op. at 18

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “In contrast, Patent Owner’s declarant, Mr. Williams, testifies based on his “experience[,] that tenons are generally included in the larger portion of two table top portions.” Ex. 2006 ¶ 55. However, Mr. Williams’ experience does not explain why an ordinary observer would understand such functional and ornamental characteristics of tenon and hole arrangements. Id. Nor does this testimony proclaim that tenons must be in the larger of two table top potions. Indeed, even considering an ordinary observer imbued with Mr. Williams’ level of expertise and experience, and understanding for instance that it may be more likely that the wider portion includes tenons, this does not resolve the glaring inconsistency that Figure 1 illustrates holes and Figure 8 illustrates tenons. In other words, Mr. Williams’ “experience” does not resolve the visible tension that, on one hand, Figure 1 illustrates holes as part of the claimed ornamental design in the wider portion of the table top, and on the other hand, Figure 8 illustrates tenons as part of the same wider portion of the table top. The problem here may be more eloquently explained as “Two roads diverged in a yellow wood[,] And sorry I could not travel both.” Robert Frost, The Road Not Taken, The Poetry of Robert Frost—The Collected Poems, 105, Henry Holt and Co. (1969). Considering the entire record before us in this case we credit Mr. Hatch’s testimony. The issue is not, as Patent Owner has framed it, whether “[o]ne of ordinary skill in the art would understand how the tenons and holes should be positioned on each of the table top portions.” Reply Opp. 7. The question is whether a person of ordinary skill in the art viewing the design for a table top in the proposed substitute claim as would an ordinary observer, understand whether or not the wider portion of the table top as Figures 1 and 6, holes. As Mr. Hatch persuasively explains, in the proposed substitute claim a majority of the drawings for the wider portion, i.e., Figures 1–6, omit the tenons added in Figure 8. Ex. 1011 ¶ 37 (Mr. Hatch testifying that “Figure 8 is the only amended figure that adds tenons/dowels.”) Indeed, Figures 1 and 6 not only fail to illustrate tenons, but actually are amended to include holes rather than tenons, as described in the Motion to Amend. See, e.g., Motion to Amend 6 (Patent Owner describing, “Figure 1: Removal of disclaimer of a total of four holes by amending the outline of the four holes from broken lines to solid lines.”). On the complete record in this proceeding, we determine that a” slip op. at 28

  • PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend granted in partGranted in part

    “On the complete record in this proceeding, we determine that a designer of skill in the art considering the claim from either their own, or the perspective of an ordinary observer, would be uncertain whether the wider portion of the claimed table top depicted in Figures 1–8 includes tenons, or holes. It is reasonable that anyone observing two distinct ornamental designs for the same wider portion of the table top would be unclear as to the claimed ornamental design where holes are shown in one figure but tenons are shown in another figure illustrating the same wider portion of the table top. Observing as a whole, the figures illustrating the table top in the proposed substitute claim, the question remains, does the wider portion of the table top include tenons, or holes? See Maatita, 900 F.3d at 1376 (“Ultimately, a patent is indefinite for § 112 purposes whenever its claim, read in light of the visual disclosure (whether it be a single drawing or multiple drawings), ‘fail[s] to inform, with reasonable certainty, those skilled in the art about the scope of the invention.’”) (quoting Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898 (2014)). proposed substitute claim fails to “inform those skilled in the art about the scope of the invention with reasonable certainty.” See Nautilus, 572 U.S. at 910. Thus, Petitioner has shown, by a preponderance of the evidence, that the proposed substitute claim is indefinite and we accordingly deny Patent Owner’s Noncontingent Motion to Amend.” slip op. at 29

  • Disclosure Requirements (§112) › Definiteness (Nautilus)IndefiniteUnpatentable

    “Federal Circuit recently explained that “a design patent is indefinite under § 112 if one skilled in the art, viewing the design as would an ordinary observer, would not understand the scope of the design with reasonable certainty based on the claim and visual disclosure.” In re Maatita, 900 F.3d 1369, 1377 (Fed. Cir. 2018). In Maatita, the Federal Circuit reversed the Board’s finding of indefiniteness of a design for a shoe bottom, i.e., a shoe sole, finding that Maatita’s two-dimensional drawing clearly demonstrates the perspective from which the shoe bottom should be viewed. A potential infringer is not left in doubt as to how to determine infringement. In this case, Maatita’s decision not to disclose all possible depth choices would not preclude an ordinary observer from understanding the claimed design, since the design is capable of being understood from the two-dimensional, plan- or planar-view perspective [] shown in the drawing. Id. at F.3d 1378–79. Different from Maatita, the issue in this proceeding is not whether an ordinary observer would sufficiently understand a three-dimensional ornamental design from a two-dimensional figure, but whether inconsistencies between figures of the proposed substitute claim render the scope of the claimed table top uncertain. See Maatita, 900 F.3d at 1376 (The Federal Circuit specifically distinguishing Maatita’s single two-dimensional drawing from indefiniteness issues raised by inconsistent drawings: “[h]ere, we are not dealing with inconsistencies in the drawings, or inconsistencies between the drawings and the verbal description, but” slip op. at 24

  § 103 obviousness§ 112 disclosurecites Nautilus
• Lululemon USA Inc. v. Nike, Inc.Instituted
  PTAB · Aug 9, 2024 · IPR2024-00460 · APJ Josiah C Cocks · IPR · Institution

  The Board instituted IPR on claims 1–21 on all petition grounds, finding a reasonable likelihood that claims 1–8 and 12–18 are anticipated by Nishida.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “IV. CONCLUSION For the reasons set forth above, we conclude that Petitioner has shown a reasonable likelihood that it would prevail with respect to at least one of the challenged claims. At this stage of the proceeding, the Board has not made a final determination on the construction of any claim term or the patentability of any challenged claim V. ORDER In consideration of the foregoing, it is hereby: ORDERED that, pursuant to 35 U.S.C. § 314(a), inter partes review of claims 1–21 of the ’749 patent is instituted with respect to all grounds set forth in the Petition; and” slip op. at 27

  • PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied

    “arguments that Nishida-US does not disclose the “simultaneously knitting” limitation of the claims of the ’749 patent constitutes “error.” Pet. 86. In our view, whether error or not, there is clear inconsistency on the record before us as to assessment of Nishida’s and Nishida-US’s teachings pertaining to the pertinent “simultaneously knitting” requirement. In that regard, as discussed above, in accounting for that requirement, the Petition unambiguously relies on disclosure in Nishida specifically stating that “when the strip of material (1) is manufactured, the patterns (2) of the uppers are produced, at the same time as the strip of material.” Pet. 25 (citing Ex. 1005, Abstract (emphasis added by Petitioner)). At the very least, there is a reasonable case to be made that such disclosure conveys that the material (1) and the patterns (2) are created simultaneously. The record is devoid of any indication that the Examiner considered or apprehended the extent of that disclosure.15 “[M]isapprehending or overlooking specific teachings of the relevant prior art where those teachings impact patentability of the challenged claims,” as seemingly occurred here, does not lend itself to a conclusion that the exercise of discretion to deny institution is appropriate. See Advanced Bionics, IPR2019-01469, Paper 6 at 8–9 n.9.” slip op. at 23

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted

    “account for limitation 1[a], on this record, is difficult to follow. Nishida makes clear that its shoe making method involves production of material web 1 by knitting and which is “provided with a single or a plurality of unwound web part(s) 2.” Ex. 1005, 5. Nishida’s disclosure also, at this time, appears unequivocal in describing that “patterns (2)” and web material 1 (or “strip of material (1)”) are manufactured or produced “at the same time.” Id. at code (57) (Abstract). Nishida also unambiguously describes its material web 1 as including “surface areas 1.1.” Id. at 7. As is evident from, for instance, Nishida’s Figure 2, surface areas 1.1 surround unwound web parts (or patterns) 2.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successInstituted

    “2. Proposed Ground of Obviousness Based on Nishida (Grounds 2 and 6) Petitioner contends that claims 9, 10, 19, and 20 would have been obvious to a person of ordinary skill in the art based on Nishida’s teachings taken with the general knowledge of a skilled artisan. Pet. 50–54. Petitioner supports its contention with citation to Dr. Brookstein’s testimony (Ex. 1003) as well as various record exhibits (e.g., Exs. 109, 1010, 1012, 1023). Id. Patent Owner does not challenge Petitioner recourse to a person of ordinary skill in the art’s general knowledge in accounting for claims 9, 10, 19, and 20. Rather, Patent Owner simply contends that the arguments it advanced in connection with Ground 1 also applies to Ground 2. As discussed above, at this time, we do not agree with Patent Owner’s arguments. Petitioner also contends that claims 11 and 21 would have been unpatentable over Nishida and Zuckerman (Ground 6). Pet. 81–84. Patent Owner also contends that the arguments it advances in conjunction with Ground 1 apply to Ground 6. Prelim. Resp. 37. We do not find those arguments availing. On the record before us, we determine that Petitioner has shown a reasonable likelihood of success in its patentability challenge to claims 9, 10, 19, and 20 based on Nishida (ground 2), and its challenge to claims 11 and 21 based on Nishida and Zuckerman (ground 6).” slip op. at 19

  § 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 8,266,749
• Next Step Group, Inc. v. Deckers Outdoor CorporationInstitution denied
  PTAB · Aug 6, 2024 · IPR2024-00525 · APJ Kimberly Mcgraw · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood of proving the challenged design claim unpatentable on any of its ten asserted grounds.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “We have authority under 35 U.S.C. § 314, which provides that inter partes review may not be instituted unless the information presented in the Petition shows that “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a); see also 37 C.F.R § 42.4(a) (“The Board institutes the trial on behalf of the Director.”). After considering the Parties’ papers and the evidence of record, we determine that Petitioner has not demonstrated a reasonable likelihood that it would prevail with respect to the one claim challenged in the Petition. Thus, we do not institute an inter partes review.” slip op. at 2

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable

    “December 15, 2015”). The date that a product was listed as first available on a website, however, is not sufficient evidence that the content of the listing, including the photographs depicted therein, were published at that time. See Ex parte Basulto, Appeal 2020-00129, 2021 WL 1264902, at *2 (PTAB Apr. 2, 2021) (stating “the date [a] product was listed on Amazon.com is not compelling evidence that the content of [the] listing itself as shown in the document, and the photographs relied on within it were published at that time”). Selling products online is dynamic. Id. Product listings may be updated and photographs of the products may change. Id. While a statement on a commercial website as to when a product was “first available” might constitute evidence as to when the product was first offered for sale, such a statement is not sufficient evidence that the listing itself, or any photograph depicted therein, has not changed over time. See Ex parte Zhang, Appeal 2021-000087, 2021 WL 633718 at *3 (PTAB Feb. 16, 2021) (stating “while the [webpage] date indicates that the product information was last updated on [date], there is no additional evidence to corroborate that the picture was publicly accessible on that date”). We have also reviewed the customer reviews that Petitioner asserts show “the listing were [sic] public, printed publications.” Reply 17 (citing Ex. 1009, 6; Ex. 1015 ¶ 17–18. None of the reviews dated prior to the critical date of November 8, 2019, however, contain any images of the UGG Neumel Boot. See Ex. 1009, 6). Thus, Petitioner does not provide sufficient evidence that any of the images on pages 1–9 of Exhibit 1009 were available on the website prior to the critical date.” slip op. at 14

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “Here, the pull-tab does serve a useful purpose as it can be used to pull the footwear onto the foot. Based on the evidence presented, however, we disagree with Petitioner that the pull tab is primarily functional and should be removed entirely from the construction of the claimed design. Petitioner presents a number of arguments to support its position that the pull tab is functional, not ornamental. Petitioner asserts that the pull tab is “obviously not ornamentation but instead is a functional element that is used to pull the footwear on to the foot, an important function and part of the Patent Owner’s marketing message.” Pet. 18–19 (citing Ex. 1011 ¶¶ 64–67; possible, the type of pull tab shown in the ’161 patent “is the kind that is generally used in shorter shaft, lower ankle height footwear to make it easier to pull up and put the boot on the foot.” Pet. 19 (citing Ex. 1009, the UGG Neumel Boot). Petitioner further asserts that the pull tab is “securely attached for actual use, countering that it is ornamental” and that “[a]ny other pull tab (e.g., not at the top of the footwear as in the UGG Neumel Boot) would not be as efficient and hence not an acceptable alternative.” Id. (citing Ex. 1011 ¶¶ 64–67; Ex. 1013, 25–27). We are not persuaded by these arguments. The “marketing material” relied on by Petition, as discussed by Mr. Holden, merely states that Ultra Mini Ugg Boots “have a slightly lower ankle to make it easier for you to slip on,” that the UGG boots are “fantastic” for those who “may struggle with pulling on other styles,” and the boots “are fantastic for those who may struggle with pulling on other styles and are looking for more comfort and durability.” See Ex. 1011 ¶ 66 (citing Ex. 1003). None of the marketing material cited by Petitioner even mentions a pull tab. Nor does the present record support Petitioner’s contentions that,” slip op. at 27

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “Petitioner’s arguments are not persuasive. First, the images of the Emu Stinger Micro Boot that Petitioner relies upon are from pages 1–6 of Exhibit 1002, which as noted above, Petitioner has not sufficiently shown to constitute a printed publication prior art. Thus, Petitioner’s arguments are based on images in a reference that does not qualify as prior art to the claimed design. The images found on pages 8 and 9 of Exhibit 1002 are not the same images as those relied upon in the Petition. Compare Ex. 1002, 8– 9, with Pet. 35–36. Thus, for at least this reason, Petitioner fails to demonstrate a reasonable likelihood that it would prevail in showing the ’161 patent is anticipated by the Emu Stinger Boot. Second, even if we were to consider any of these images of the Emu Stinger Micro Boot depicted in Exhibit 1002, Petitioner’s arguments are not persuasive because the arguments fail to adequately address differences between the claimed design and the prior art as viewed by an ordinary observer. See Door-Master Corp., 256 F.3d at 1313 (stating for anticipation to be found, the claimed design and the prior art design must be substantially the same). For example, the Figures of the ’161 patent depict (1) a stitch pattern design that includes a wavy line on the back heel of the boot (see Figs. 1–3, 5), (2) a pull tab that extends over the top part of the back of the boot and opening for insertion of the foot that appears to constitute more than 50% of the length of the boot (Figs. 2, 3, 6), and (4) a backward sloping top line. Petitioner does not address the differences between (1) the stitch pattern (2) the pull tab, or (3) the size of the opening for the foot at all in its anticipation argument. See Pet. 35–38.” slip op. at 37

  Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Graham

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.