• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00189 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claim 19 is unpatentable as obvious over Kim and over Nam; the challenge based on Lee and Park fails for lack of a reasonable expectation of success.

  RulingsFinal written decision

  • Adverse judgmentAdverse judgmentOther

    “B. Patent Owner’s Disclaimer of Claims 17 and 20 As indicated above, Patent Owner filed a statutory disclaimer of claims 17 and 20 of the ’666 patent. See Ex. 2005. In view of Patent Owner’s statutory disclaimer, we treat claims 17 and 20 as having never been part of the ’666 patent. See Vectra Fitness, Inc. v. TNWK Corp., ‘considered as part of the original patent’ in [35 U.S.C.] § 253 to mean that the patent is treated as though the disclaimed claims never existed.”). Because inter partes review cannot be instituted based on disclaimed claims, we do not consider claims 17 and 20 to be within the scope of this proceeding. 37 C.F.R. § 42.107(e) (“No inter partes review will be instituted based on disclaimed claims.”); General Elec. Co. v. United Techs. Corp., IPR2017-00491, Paper 9 (PTAB July 6, 2017) (precedential) (denying institution in view of a statutory disclaimer of all the challenged claims). Thus, we confine our analysis in this Decision to claim 19, the challenged claim that has not been disclaimed.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA”) “would have had a bachelor’s degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) 3D memory devices, or an equivalent level of skill, knowledge and experience (e.g., an advanced degree may substitute for professional experience).” Pet. 24–25 (citing Ex. 1003 ¶¶ 34–37). Petitioner further contends that the “POSITA would also have been aware of and generally knowledgeable about 3D memory’s structure, its component parts, and how it operates.” Id. at 25 (citing Ex. 1003 ¶¶ 34–37).” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “evidence from the complete record now before us, we determine that the claim term “curved side surface” encompasses any outer surface of the structure with curvature. See Hamilton Beach Brands, Inc. v. F’real Foods, LLC, 908 F.3d 1328, 1338–1339 (Fed. Cir. 2018) (finding that it is acceptable for the Board to adopt its own claim construction where the parties “had notice of the contested claim construction and an opportunity to be heard”). We do not adopt Patent Owner’s position that “curved side surface” requires the side surface to be curved along a direction perpendicular to the top surface of the structure (e.g., the z-axis).” slip op. at 12

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “curved side surface” are premised on its proposed claim construction which, as set forth above, we decline to adopt. Instead, we determined that “curved side surface” as used in the challenged claim encompasses any outer surface of the structure with curvature, which does not need to be curved in any specific direction. See § II.B.1, supra. Kim states: Embodiments of the inventive concepts in which the protrusion pad PAD_P has a rectangular parallel[] shape is illustrated, but the protrusion pad PAD_P is not limited thereto and, in some embodiments, may have a shape including a curved surface based on a virtual rectangular parallel[] shape, a cylindrical shape, or any shape. Ex. 1005, 8:29–34 (emphases added). Dr. Lee testifies that “[a] POSITA would have recognized that this includes configurations where the sides of the protrusion pads are curved, particularly to optimize electrical connectivity and mitigate stress at material interfaces.” Ex. 1003 ¶ 201. Dr. Lee further testifies that a POSITA would have understood Kim’s disclosure “teaches a variety of different protrusion pad PAD_P shapes” including “pads with curved sides when viewed in cross-section or pads with curved sides when viewed from above.” Id. ¶ 202. Accordingly, we determine that Kim discloses a cylindrically-shaped PAD_P that has a “curved side surface” as required by the challenged claim. slip op. at 24

  Patent outcomesUS 11,145,666 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 11,145,666
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00118 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 1–14 were not shown unpatentable because the Petition did not establish the claimed adjacent pad groups, common ESD bus, or pad-to-pad bonding wires.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedOther

    “would have had a bachelor of science degree in electrical engineering or similar discipline, and 2–3 years of professional experience working with (e.g., researching, analyzing, designing, or teaching) ICs, or equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience and vice versa). This POSITA would have been aware of and generally knowledgeable about IC design, layout, manufacturing, packaging, and ESD protection. Pet. 18 (citing Ex. 1003 ¶¶ 29–33). Patent Owner states that it “does not dispute Petitioner’s proposed level of a” POSITA “for purposes of this IPR.” PO Resp. 10. In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’164 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Based on our review of the complete trial record and the arguments raised by the parties, we determine that it is not necessary to expressly construe any claim terms to resolve the parties’ dispute. Realtime Data, 912 F.3d at 1375.” slip op. at 7

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “includes segmented ground rails 350, 355. . . . The package substrate 310 includes a package common ground rail 360, and the segmented SoC ground rails 350, 355 are independently connected to the package common ground rail 360 via separate connections 370, 375 respectively.”). As set forth above, Dr. Foty describes the three ground lines in Saint Figure 7-7 as “segmented rails” when discussing the combination of Saint and Haralabidis, thus equating the three ground lines in Saint Figure 7-7 with Haralabidis’ segmented ground rail. Ex. 1003 ¶ 368. Neither Petitioner nor Dr. Foty, however, adequately addresses how or why a POSITA would have understood that the three separate grounds lines in Saint Figure 7-7 were “segmented rails” like the segments of the single ground line described in Haralabidis. In contrast, Dr. Khatri credibly testifies: Haralabidis teaches the use of a “common ground rail” to connect “segmented ground rails.” Haralabidis, 3:9–22, 3:34– 40, 3:65–4:12. A POSITA would understand “segmented ground rails” to refer to a single ground signal that has been “segmented.” That is fundamentally different from the design of Saint’s Figure 7-7 that Dr. Foty relies on, which uses three different ground signals, GND1, GND2, and GND3—not a single ground signal that has been “segmented.” Because of that, a POSITA would not have been motivated to change the Figure 7-7 design completely to connect three separate signals (GND1, GND2, and GND3) together as Dr. Foty proposes. Ex. 1003 ¶ 368. Indeed, for these reasons, a POSITA would have understood Haralabidis’ teachings of a “common ground rail” are inapplicable to Saint’s Figure 7-7. Ex. 2010 ¶ 129. Petitioner’s arguments and Dr. Foty’s testimony with respect to the modification of Saint Figure 7-7 leave an analytical gap that does not apprise us of why a POSITA would have modified Saint Figure 7-7 to include a common ESD bus as described in Haralabidis.” slip op. at 37

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “For these reasons, we find that Yoshinaga’s statement that “[r]eference potential pads are not shown to simplify the drawing” indicates that reference potential pads are not depicted in Yoshinaga Figure 6, and determine that Yoshinaga Figure 6 does not disclose “a plurality of pad groups, adjacent and connected to the plurality of ESD buses” as recited in claim 6. Petitioner also argues that a POSITA would have understood that power supply pads 3, 4, and 58 in Yoshinaga “could just as readily be used as reference pads” and it would have been obvious “to use the pads immediately next to the saved areas as reference pads (e.g., pads 5 and 6) as pad assignments were left to the designer’s discretion.” Pet. 31 (citing Ex. 1003 ¶¶ 137–139). Petitioner asserts that “selecting which pads to use for ground, power signals, etc. is a design choice that depends on factors like chip size, the number of I/O signals, and the number of pads available.” Pet. 31 (citing Ex. 1003 ¶ 137–139). Petitioner states that such discretion would be to preserve Yoshinaga’s saved area for other circuitry as taught by Saint. Pet. 31–32 (citing Ex. 1003 ¶¶ 137–139; Pet. 19–23 (§ IX.A)). Neither Petitioner nor Dr. Foty adequately explain, however, why a POSITA would have made this specific design choice, namely, replacing power supply pads 3, 4, and 58 with reference pads. Pet. 31; Ex. 1003 ¶¶ 137–139; see also Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1069 n.4 (Fed. Cir. 2018) (“Merely stating that a particular placement of an element is a design choice does not make it obvious.” (quoting Cutsforth, Inc. v. MotivePower, Inc., 636 Fed. Appx. 575, 578 (Fed. Cir. 2016))). Petitioner offers the general proposition that pad assignments are left to the designer’s discretion, but this does not provide a reason why a POSITA would have been motivated to modify Yoshinaga Figure 6 as proposed. Pet. 31; Ex. 1003 ¶¶ 137–139. We have determined that Yoshinaga does not show (rather than does not label) reference pads. Because all of Yoshinaga’s illustrated pads are power supply pads, Petitioner’s proposed reassignment of pads would not be a simple matter of rearrangement of an existing mixture of power supply and reference pads, but require that reference pads be imported from elsewhere, and power supply pads be moved to some unspecified location. Petitioner’s arguments and Dr. Foty’s testimony with respect to the modification of Yoshinaga Figure 6 leave an analytical gap that does not apprise us of why a POSITA would have modified Yoshinaga Figure 6 to include reference pads in the place of power supply pads 3, 4, and 58. We agree with Patent Owner that none of Petitioner’s rationales” slip op. at 20

  Patent outcomesUS 10,879,164 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 10,879,164
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Jun 1, 2026 · IPR2025-00117 · APJ Michael T Cygan · IPR · Final written decision

  Claims 1–19 are unpatentable: claims 1–9, 11–16, 18, and 19 as obvious over Kim; claims 10 and 17 as obvious over Kim and Fang, Park, and Park and Fang.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “at the critical time “would have had a bachelor of science degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶ 42). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. Patent Owner does not dispute Petitioner’s definition. PO Resp. 7. We adopt Petitioner’s proposed 4 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 103; PO Resp. the ’711 patent and the prior art of record.” slip op. at 5

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner

    “Based on the record before us, we agree with Petitioner that “on a surface” should be interpreted in line with the definition of “on” set forth in the ’711 patent. Ex. 1001, 4:1–6. We particularly note that the ’711 patent states that “‘on’ . . . should be interpreted in the broadest manner” and that “on” is not limited to “directly on.” Id. Instead, the ’711 patent states that “‘on’ also includes the meaning of ‘on’ something with an intermediate feature or layer therebetween.” Id. Patent Owner agrees that this definition controls the “standalone ‘on’” term such that A may be on B even if there is an intervening layer between them. Tr. 55:8–11 (“The standalone ‘on,’ we agree in the context of the patent, you can have intervening layers. I think the patent is clear about that.”). Claim 14 recites that the etch-stop layer is “on” something; i.e., “on a side surface and a top surface of each step.” Ex. 1001, 16:20–22. Patent Owner agrees that a surface is a “something.” Tr. 56:5–8 (“surface obviously is a something”). Substituting the “a “‘on’ something with an intermediate feature or layer therebetween” results in claim 14 reading as, “on a surface with an intermediate feature or layer therebetween.” Unlike “directly on,” which specifies the relation between two things, “a surface” may merely indicate the thing that something is “on,” particularly when “on” is “interpreted in the broadest manner” as expressly required by the ’711 patent.” slip op. at 7

  • Expert testimonyPatent owner expert discountedDecided for petitioner

    “Although Dr. Campbell testified in his deposition in response to Petitioner’s counsel that “on the surface” requires direct contact with the surface, his interpretation was based on “embodiments of” the patent rather than a general understanding of a person skilled in the art confronted with that term. Ex. 1027, 122:6–25, 124:6–23 (“I’m not sure if there are other sources for that, but it was on the ’711, so I’ve taken it there.”). Dr. Campbell, upon questioning from Patent Owner’s counsel, later stated that “an expert in semiconductor fabrication” would understand “on the surface” to mean “contact between one layer and another . . . with nothing in between.” Id. at 146:25–147:6. However, Dr. Campbell did not explain why such an interpretation is particular to the semiconductor fabrication art, or provide other explanation or support for this statement, which is in tension with the definition of “on” in the ’711 patent. Accordingly, we significantly discount the weight accorded to that statement. Phillips, 415 F.3d at 1318 (stating, “conclusory, unsupported assertions by experts as to the definition of a claim term are not useful to a court. Similarly, a court should discount any expert testimony ‘that is clearly at odds with the claim construction mandated by the claims themselves, the written description, and patent.’”). On balance, Dr. Campbell’s testimony is best understood as a description of certain Figures of the ’711 patent rather than a representation of an ordinarily skilled person’s understanding of the term “on the surface.” See Ex. 2009 ¶ 47 (describing Figs. 1, 3, and 4 as depicting layers in contact with the underlying layer or substrate). For example, Dr. Campbell describes Figure 9A as having a barrier layer “on and directly contacting the top and side surfaces of each step.” Id. ¶ 28 (emphasis added) (citing inter alia Ex. 1001, 7:6–67). Dr. Campbell does not explain why, beyond the fact that many Figures show layers as adjacent and in contact, a person of ordinary skill in the relevant art would understand those Figures to limit the claim language rather than illustrating particular embodiments that fall within a broader scope of claims 14 and 15. See Hill-Rom Servs., Inc. v. Stryker Corp., 755 F.3d 1367, 1371 (Fed. Cir. 2014) (“While we read claims in view of the specification, of which they are a part, we do not read limitations from the embodiments in the specifications into the claims.”).” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “We agree with Petitioner that Kim’s first and second section are described as compatible, not mutually exclusive, embodiments. Kim’s second section builds further layers upon the structure of its first section, and states: In these embodiments, the same elements as in the embodiments previously described with reference to FIGS. 5A through 14A and FIGS. 5B through 14B will be denoted by the same reference numbers therein, and for concise description, overlapping description of elements previously described with reference to FIGS. 5A through 14A and FIGS. 5B through 14B may be omitted. Ex. 1005 ¶ 184 (emphasis added). Patent Owner argues that only the embodiments in Figures 17A–22B describe an etch-stop layer and a barrier layer (as claimed), and that the language cited for a gate-stack-on-top configuration (e.g., Ex. 1005 ¶¶ 90, 91, and 240) is “conspicuously absent from the description of Figures 17A–22B.” PO Resp. 20 (citing Ex. 2009 ¶ 36). However, Figures 17A–22B do not further address the underlying staircase structure that was detailed in the descriptions of the Figures 4 through 15 embodiments. While Figures 17A–22B show a gate-stack-on-bottom configuration, this merely continues the gate-stack-on-bottom illustrations that were used in all of the previous Figures, even for those in which it is undisputed that a gate-stack-on-top configuration is a described alternative. The Figures exemplify rather than limit the description of the gate-stack-on-bottom view in Figures 4–15 and do not exclude the gate-stack on bottom description of the embodiments exemplified by those figures.” slip op. at 17

  Patent outcomesUS 10,672,711 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,672,711
• Revvo Technologies, Inc. v. Cerebrum Sensor Technologies, Inc.Other
  PTAB · Jan 14, 2026 · IPR2025-00632 · APJ Mitchell G Weatherly · IPR · Remand

  On remand, the Board reinstituted review of all challenged claims on all grounds after finding Petitioner sufficiently explained its differing claim-construction positions.

  RulingsRemand decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Id. The Director neither addressed the merits of Petitioner’s challenges nor found that our prior consideration of those merits was faulty. Accordingly, we understand that we need not reconsider our conclusion that Petitioner had demonstrated a reasonable likelihood of proving that claims 1, 2, 7–9, 11, 12, and 20–24 were unpatentable or that the merits of patentability set forth in the Petition warranted institution of inter partes review.” slip op. at 5

  • BurdenDecided for petitioner

    “The question before us, therefore, is whether the Petitioner’s proffered explanation that it has proposed a different claim interpretation before the Board because the District Court may decline to adopt the narrower claim interpretations it advocates there is sufficient. We find that Petitioner’s explanation is sufficient because it follows the Director’s exemplary logic. Whether a district court has already or might in the future decline to adopt constructions that a petitioner proposes in related district court litigation merely reflects the timing of when a dispute over claim interpretation will be resolved. The Director and Patent Owner both recognize that, to resolve the dispute over claim interpretation that exists here, a decision-maker must determine “a single claim construction that best captures the true meaning of the patent claim.” Remand 4; PO Remand Br. 3. Based on the record presented by the parties to date in this proceeding, no dispute exists that the disputed claim terms mean what Patent Owner says they mean in the Litigation. Accordingly, we find that, at this stage of the proceeding, it is undisputed that Patent Owner’s interpretations of the claim terms represent the “single claim construction that best captures the true meaning of the patent claim.”8 Under that claim interpretation, we” slip op. at 8

  None
  Patents in suitUS 11,835,421
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.No claims unpatentable
  PTAB · Jan 5, 2026 · IPR2024-00911 · APJ Kimberly Mcgraw · IPR · Final written decision

  Claim 10 was not shown unpatentable under § 103 over Toyama because the challenge did not remedy the deficiencies in its nonobvious base claim 8.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedOther

    “Petitioner’s proposed definition appears to be consistent with the cited prior art and the disclosure of the ’806 patent, and we adopt it for purposes definition of a POSITA.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “In our Decision on Institution, we noted that the parties disputed construction of “each local contact” found in dependent claim 10, and “dielectric structure” recited in independent claim 8. Inst. Dec. 8–9. We determine that no express construction of “each local contact” recited in claim 10, or any other claim term, is required to resolve the issues in dispute in this proceeding.” slip op. at 9

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “independent claim 8 would have been obvious for the reasons set forth in its petition in the 791-IPR. See id. at 1 (stating the present Petition maintains the same grounds set forth in IPR2024-00791). As explained in our Final Written Decision (Ex. 3001) in the 791-IPR issued concurrently, Petitioner did not show by a preponderance of the evidence that independent claim 8 would have been obvious over Toyama under any of Petitioner’s three alternative arguments. None of Petitioner’s arguments set forth in the present Petition, including the arguments directed to claim 10, remedy the deficiencies regarding its base claim 8. See Pet. 53–31, 98–101, 124–125; see also Reply. Accordingly, for the same reasons set forth in the Final Written Decision in the 791-IPR issued concurrently, Petitioner has not shown by a preponderance of the evidence that independent claim 8, and therefore dependent claim 10, would have been obvious over Toyama. See In re Fine, 837 F.2d 1071, 1076 (Fed. Cir. 1988) (“Dependent claims are nonobvious under section 103 if the independent claims from which they depend are nonobvious.”); Ex. 3001.” slip op. at 14

  • Expert testimonyNot reached

    “Petitioner relies on the Declaration of Jack C. Lee, Ph. D. (Ex. 1003) and the Reply Declaration of Jack C. Lee, Ph.D. (Ex. 1043) in support of its 2 The Leahy-Smith America Invents Act (“AIA”), Pub. L. No. 112–29, 125 Stat. 284 (2011), revised 35 U.S.C. §§ 102 and 103 effective March 16, 2013. Because the ’806 patent has an effective filing date after March 16, 2013 (Ex. 1001, codes (22), (63)), we refer to the AIA version of Sections 102 and 103. 3 Toyama, US Pub. No. 2017/0179026 A1, published June 22, 2017 (Ex. 1005). 4 Petitioner characterizes its alternative arguments of unpatentability of claim 10 as based on three “grounds.” See Pet. 15. Because each of Petitioner’s arguments are based on the same reference, albeit different embodiments, we characterize Petitioner’s challenges as three alternative arguments based on a single ground because each argument relies on the same reference. Ph.D. (Ex. 2005). Transcripts of the depositions of Dr. Lee (Exs. 2006, 2010) and of Dr. Yang (Ex. 1044) have also been submitted into the record.” slip op. at 7

  Patent outcomesUS 10,937,806 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 10,937,806
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.No claims unpatentable
  PTAB · Jan 5, 2026 · IPR2024-00791 · APJ Kimberly Mcgraw · IPR · Final written decision

  Claims 8, 9, 11, and 12 were not shown unpatentable under §103 over Toyama because the asserted structures did not meet the construed TAC limitation and the proposed modifications lacked adequate motivation.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA”) would have had “a bachelor of science degree in electrical engineering or a similar discipline” with “2–3 years of professional experience working with (e.g., researching, designing, or teaching) NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶¶ 34–38). Petitioner further contends that a “POSITA would also have been aware of and generally knowledgeable about semiconductor manufacturing and 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. Patent Owner does not object to Petitioner’s proposed definition (PO Resp. 12), but Patent Owner’s declarant Dr. Yang provides a slightly different definition, stating a POSITA: would have had at least a bachelor’s degree in electrical engineering, materials science, or a similar discipline, along with at least 2 years of professional experience in semiconductor fabrication process integration for memory devices or an equivalent level of knowledge and experience. For example, an experience, or extensive experience may replace some of the educational requirements. Ex. 2004 ¶ 43. Petitioner’s proposed definition appears to be consistent with the cited prior art and the disclosure of the ’806 patent, and we adopt it for purposes of this Decision. We note that our Decision would be the same under either definition of a POSITA.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “(TACs) extending vertically through the dielectric structure” recited in claim element [8.G] encompasses multiple TACs, each extending through a separate, different dielectric structure, while Patent Owner argues that the phrase requires that the plurality of TACs (i.e., at least two TACs) must extend through the same dielectric structure. See, e.g., Pet. 49–50; PO Resp. 18–21; Reply 2–4. In our Decision on Institution, we preliminarily construed this phrase to require that more than one (i.e., a plurality) TAC in the TAC region extends vertically through a single dielectric structure. See Inst. Dec. 17. Based upon a full record, we construe this term of claim element [8.G.iii] (i.e., “ . . . a through array contact (TAC) region formed between the first and second channel regions, wherein the TAC region comprises a plurality of through array contacts (TACs) extending vertically through the dielectric structure”) according to its plain language to require that a plurality (i.e., more than one) of TACs must extend vertically through a (i.e., at least one) dielectric structure. Under this construction, the plurality of TACs may extend through more than one dielectric structure, but the plurality of TACs must extend through at least one dielectric structure. The plain language of the claim is not satisfied if each TAC extends through a separate dielectric structure because, in this scenario, there is not a plurality of TACs that extend through a dielectric structure.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “Resp. 31–33. Patent Owner persuasively explains, with supporting testimony by Dr. Yang, that these regions containing the interconnects and peripheral circuitry would prevent repeating the layout in the hd1 direction because the interconnects and peripheral circuitry would be located in the same region that Petitioner proposes adding the additional memory plane. Id. (citing Ex. 2004 ¶ 72). Patent Owner further persuasively explains that Toyama teaches repeating the layout in the hd2 direction, not the hd1 direction, because of the location of its interconnects and peripheral circuitry, which prevents repeating the structure in the hd1 direction. See id. at 34 (citing Ex. 1005, Figures 17E, 17F). Patent Owner persuasively explains that Toyama Figure 17F (which is an alternate view of the structure shown in Figure 17E) shows that the memory array has interconnects and driver circuits on at least the left side, which means that in a modification adding additional planes, each plane would necessarily include these interconnects and driver circuitry on the left side. Id. at 35 (citing Ex. 2004 ¶ 75). We agree with Patent Owner that Petitioner has not sufficiently shown that it would have been obvious for a POSITA to repeat the structure shown in Figure 17E in the hd1 direction due to the presence of its interconnects and peripheral circuitry.” slip op. at 34

  Patent outcomesUS 10,937,806 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,937,806
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Jan 5, 2026 · IPR2024-00909 · APJ Michael T Cygan · IPR · Final written decision

  Claims 1–7 and 18 are unpatentable as obvious over Toyama, based on the First Exemplary Structure and, for some limitations, the Second Modification.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art (“POSITA”) at the critical time “would have had a bachelor of science degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) NAND 2 We apply AIA 35 U.S.C. §§ 102, 103 to the ’378 patent because it was filed after, and never claimed the benefit of an effective filing date before, March 16, 2013. Petitioner also applies AIA §§ 102 and 103. See Pet. 2, 24–26. 3 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 104; PO Resp. experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 33 (citing Ex. 1003 ¶¶ 37–39). Petitioner further asserts that a POSITA “would also have been aware of and generally knowledgeable about semiconductor manufacturing and 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. Patent Owner does not object to such a definition. PO Resp. 13. We adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the Specification of the ’378 patent and the prior art of record.” slip op. at 5

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Petitioner asserts that only the term “a staircase structure in the alternating layer” should be construed, and that the term should be construed as “a staircase structure in the alternating layer stack.” Pet. 32–33. Patent Owner does not dispute this construction, and our determination would be unaffected by Petitioner’s proposed construction. Therefore, we need not provide an express construction of this term. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Petitioner asserted that all other terms should receive their plain and ordinary meaning. Pet. 33.” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “Because neither the language of claim 15 nor the Specification indicates a narrower meaning, we agree with Petitioner that the phrase “a substrate with an isolation structure” should be given its plain meaning. Patent Owner argues that the plain meaning of “with” is “having” or “inclusive of.” PO Sur-reply 2 (citing Ex. 1038, 8). Citing the same dictionary, Petitioner argues that the plain meaning of “with” includes objects that are separate. Pet. Reply 3 (stating, “In the sentence ‘Alice went to school with Bob,’ it would be nonsensical to interpret that to mean that Bob is part of Alice.”) (citing Ex. 1038, 7). The cited definition of “with” states that it may indicate “accompaniment,” such as “went there [with] her,” as well as combination (“milk [with] honey”). Ex. 1038, 7. Based on the evidence and arguments presented, we determine that the phrase “a substrate with an isolation structure” should be given its plain meaning, which includes accompaniment (A is accompanied by B) as well as combination (A is part of B, or A and B are a part of C).4” slip op. at 9

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “We are persuaded by Petitioner that the lower volume of Toyama’s dielectric fill portion teaches the isolation structure and the upper volume of Toyama’s dielectric fill portion teaches the dielectric structure. First, the structure may be the same material; i.e., SiO2. Ex. 1001, 10:37–40 (isolation structure 233 filled with SiO2), 10:46–47 (dielectric structure can include SiO2, and can include the same material as dielectric layer 230), 10:12–14 (dielectric layer 230 is formed of SiO2). Second, the ’378 patent indicates that the dielectric structure may be “aligned to” and “in contact with” the isolation structure. Id. at 10:30–36. Thus, the two structures of the ’378 patent may appear as two aligned and contacting structures; e.g., a single column of the same material. Third, the ’378 patent specification describes that the dielectric structure and a top portion of the isolation structure may be formed in the same deposition step. When etching the opening 600 that is to be filled with dielectric structure 232, “opening 600 may extend partially into STI structure 233;” i.e., “the etch process used to form opening 600 may also remove (recess) portion of the top surface of STI structure 233.” Id. at 15:12–20; Fig. 6. Then, “opening 600 can be filled with a dielectric layer 702,” which may be the same SiO2 material as the isolation structure, and “[a]s a result, dielectric structure 232 is formed.” Id. at 15:42–54. Thus, the ’378 patent describes a dielectric structure that partially replaces or re-forms, with the same material, its isolation structure. The ’378 patent does not mention whether this results in a dielectric structure that extends into the isolation structure or an isolation structure re-filled to its original height, and it would not appear to matter because both structures may be composed of the same material. The ’378 patent’s indifference to the exact boundary between dielectric structure 232 and isolation structure 233 during formation from the same material indicates that these structures need not be taught by distinct elements. applicable only if the ’378 patent describes that the isolation region and dielectric structure were formed as a single unitary structure. PO Resp. 51; PO Sur-reply 16–18. Retractable Techs. focuses on whether the two elements at issue “could be formed as an integral structure in the first instance,” not whether they were formed integrally. Retractable Techs., 653 F.3d at 1304 (“The specifications further disclose a method to couple the two structures . . . to allow some diffusion or insipient melting to occur where they touch . . . . This passage suggests that [the structures] could be formed as an integral structure in the first instance”). Retractable Techs. looks to whether the specification suggests that the claim terms require separate structures. Powell v. Home Depot U.S.A., Inc., 663 F.3d 1221, 1232 (Fed. Cir. 2011). Patent Owner’s focus on whether the claimed structures were disclosed as being separately formed disregards the issue of whether the separately claimed structures require specific methods of forming those structures. Here, as in Retractable Techs. and Powell, the Specification does not indicate any particular structure or function for the structures that results from their separate steps of deposition. Thus, as held in Retractable Techs. and Powell, the two portions of Toyama “need not be two separate parts” to teach two separate claim limitations. Retractable Techs., 635 F.3d at 1303–04. Consequently, we determine that the claim language does not support a requirement that these structures be separate and distinct. Patent Owner’s further arguments are not availing. Contrary to Patent Owner’s argument, in our “Third” point, supra, we do not state that the isolation structure and the dielectric structure are formed in the same deposition step. PO Resp. 52–53; PO Sur-reply 18; Supra at 34. We only” slip op. at 33

  Patent outcomesUS 10,658,378 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,658,378
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Jan 5, 2026 · IPR2024-00788 · APJ Michael T Cygan · IPR · Final written decision

  Claims 15–17, 19, and 20 are unpatentable as obvious over Toyama, Mushiga, and Mushiga with Makala.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “at the critical time “would have had a bachelor of science degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶¶ 36–37). Petitioner further asserts March 16, 2013. Petitioner also applies AIA §§ 102 and 103. See Pet. 2, 24–26. 3 Neither party presented evidence or arguments regarding objective evidence of non-obviousness during trial. knowledgeable about semiconductor manufacturing and 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. (emphasis omitted). Patent Owner does not object to this assessment. PO Resp. 12. We adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’378 patent and the prior art of record.” slip op. at 5

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Petitioner does not dispute Patent Owner’s construction, asserting that its grounds render obvious this limitation under Patent Owner’s construction propose construction of the term “through array contact,” which was at issue in the Preliminary Response and in the parallel district court proceeding. Id. Nor have the parties indicated, in response to Board inquiry, that any relevant construction has occurred. See Paper 34. with Petitioner that Patent Owner does not dispute this aspect of the “a dielectric structure on the isolation structure” limitation in Petitioner’s assertions based on Toyama. PO Sur-reply 20–21. Patent Owner does dispute that Mushiga’s insulating spacer 586 is “on” the isolation structure. PO Resp. 70–72. However, because Petitioner relies upon a dielectric structure that includes other portions of Mushiga that Patent Owner does not dispute to be on the asserted isolation structure, the dispute is whether Petitioner is correct to include multiple components as part of a single dielectric structure, and not whether spacer 586 is on an isolation structure. Id. Because Petitioner’s assertions and our determination would be unaffected by its proposed construction, we need not construe this term. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “Patent Owner’s citations to the Specification do not support its proposed construction. Patent Owner relies on multiple embodiments, only one of which describes a substrate “with” an isolation structure. PO Resp. 21 (citing Ex. 1001, 22:27–28). For example, one of Patent Owner’s cited embodiments recites “on” an isolation region, but Patent Owner specifically argues that the “on” embodiment does not apply to the claimed “with” embodiment. Id. at 22 (denying that “the ‘with’ relationship encompasse[s] the ‘on’ relationship”). Only one of the embodiments cited is clearly within the scope of the “with” claim language, and that embodiment describes no more than the claim language itself. Ex. 1001, 22:27–28. Moreover, Figure 2, cited by Patent Owner, is an illustration “according to some embodiments,” but is not described as depicting all embodiments. Ex. 1001, 3:35–36. These other embodiments need not be included in claim 15’s “with” language because other claims (not at issue in this proceeding) specifically recite language from other embodiments. Ex. 1001, 23:20–21 (“a dielectric structure on an isolation region of the substrate”), 23:58 (“forming an isolation structure on a substrate”). Thus, the specification of the ’378 patent does not limit “a substrate with an isolation structure” in claim 15 to “part of” an isolation structure, such as in a shallow region or other partial-depth portion of the substrate. Because neither the language of claim 15 nor the Specification indicates a narrower meaning, we agree with Petitioner that the phrase “a Patent Owner argues that the plain meaning of “with” is “having” or “inclusive of.” PO Sur-reply 2 (citing Ex. 1038, 7). Citing the same dictionary, Petitioner argues that the plain meaning of “with” includes objects that are separate. Pet. Reply 3 (stating, “In the sentence ‘Alice went to school with Bob,’ it would be nonsensical to interpret that to mean that Bob is part of Alice.”) (citing Ex. 1038, 7). The cited definition of “with” states that it may indicate “accompaniment,” such as “went there [with] her,” as well as combination (“milk [with] honey”). Ex. 1038, 7. Based on the evidence and arguments presented, we determine that the phrase “a substrate with an isolation structure” should be given its plain meaning, which includes accompaniment (A is accompanied by B) as well as combination (A is part of B, or A and B are a part of C).” slip op. at 9

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “We are persuaded by Petitioner that the lower volume of Toyama’s dielectric fill portion teaches the isolation structure and the upper volume of Toyama’s dielectric fill portion teaches the dielectric structure. First, the ’378 patent indicates that both the dielectric structure and the isolation structure may be the same material; i.e., SiO2. Ex. 1001, 10:37–40 (isolation structure 233 filled with SiO2), 10:46–47 (dielectric structure can include SiO2, and can include the same material as dielectric layer 230), 10:12–14 (dielectric layer 230 is formed of SiO2). Second, the ’378 patent indicates that the dielectric structure may be “aligned to” and “in contact with” the isolation structure. Id. at 10:30–36. Thus, the two structures of the ’378 patent may appear as two aligned and contacting structures; e.g., a single column, of the same material. Third, the ’378 patent specification describes that the dielectric structure and a top portion of the isolation structure may be formed in the same deposition step. When etching the opening 600 that is to be filled with dielectric structure 232, “opening 600 may extend partially into STI structure 233;” i.e., “the etch process used to form opening 600 may also remove (recess) portion of the top surface of STI structure 233.” Id. at 15:12–20. Then, “opening 600 can be filled with a dielectric layer 702,” which may be the same SiO2 material as the isolation structure, and “[a]s a result, dielectric structure 232 is formed.” Id. at 15:42–54. Thus, the ’378 patent describes a dielectric structure that partially replaces or re-forms, with the same material, its isolation structure. The ’378 patent does not mention whether this results in a dielectric structure that extends into the isolation structure or an isolation structure re-filled to its original height, and it would material. The ’378 patent’s indifference to the exact boundary between dielectric structure 232 and isolation structure 233 during formation from the same material indicates that these need not be taught by distinct elements. We do not agree with Patent Owner that Retractable Techs. is applicable only if the ’378 patent describes that the isolation region and dielectric structure were formed as a single unitary structure. PO Resp. 50; PO Sur-reply 9. Retractable Techs. focuses on whether the two elements at issue “could be formed as an integral structure in the first instance,” not whether they were formed integrally. Retractable Techs., 653 F.3d at 1304. (“The specifications further disclose a method to couple the two structures . . . to allow some diffusion or insipient melting to occur where they touch . . . . This passage suggests that [the structures] could be formed as an integral structure in the first instance”). Retractable Techs. looks to whether the specification suggests that the claim terms require separate structures. Powell v. Home Depot U.S.A., Inc., 663 F.3d 1221, 1232 (Fed. Cir. 2011). Patent Owner’s focus on whether the claimed structures were disclosed as being separately formed disregards the issue of whether the separately claimed structures require specific methods of forming those structures. Here, as in Retractable Techs. and Powell, the Specification does not indicate any particular structure or function for the structures that results from their separate steps of deposition. Thus, as held in Retractable Techs. and Powell, the two portions of Toyama “need not be two separate parts” to teach two separate claim limitations. Retractable Techs., 635 F.3d at 1303– 04. Consequently, we determine that the claim language does not support a requirement that these structures be separate and distinct.” slip op. at 32

  Patent outcomesUS 10,658,378 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,658,378
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.No claims unpatentable
  PTAB · Dec 10, 2025 · IPR2024-01186 · APJ Brian D Range · IPR · Final written decision

  Claims 1–20 were not shown unpatentable because Kwatra does not teach or suggest minimizing rotational velocity and acceleration as required by the claims.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) would have the following characteristics: “a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing or digital cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–37). Petitioner states that, “[a]lternatively, a POSITA would have four years of experience working on image or video processing 6 Patent Owner asserts objective evidence of nonobviousness. Prelim. Resp. 19–27. or digital cameras.” Id. Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute the level of ordinary skill in the art. Prelim Resp. 14–15. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’894 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “Petitioner “does not believe any terms require a formal construction.” Pet. 6. Patent Owner agrees “no claim terms presently require construction to resolve any current dispute between the parties.” PO Resp. 15. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Kwatra teaches, at Equation 7, minimizing velocity and acceleration of a function representing camera path (P). FF ¶¶ 6, 8–9. Kwatra does not state that this camera path function considers rotation. Rather, the words “camera path” suggest x, y, z movement of the camera rather than rotation of the camera. Dr. Foroosh’s testimony that Kwatra’s minimization of a smoothed camera path does not result in minimizing rotational velocity and acceleration is credible because this testimony is consistent with Kwatra as a whole and consistent with the other evidence of record. Id. ¶ 10. Kwatra recognizes that image rotation angle (“θ”) may not remain smooth. Id. ¶ 12. But rather than attempting to minimize velocity and acceleration of rotation of the camera housing, Kwatra states that applying a smoothness constraint on rotation angle “may be non-linear.” Id. ¶ 13. Consistent with Kwatra, Dr. Foroosh credibly explains the difficulty of applying linear techniques to rotation. Id. Thus, Kwatra proposes instead constraining the sine and cosine of theta. Id. ¶ 14. The Kwatra provisional application is part of the Kwatra reference (id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “(id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

  Patent outcomesUS 10,574,894 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,574,894
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentable
  PTAB · Dec 2, 2025 · IPR2024-01052 · APJ Brian D Range · IPR · Final written decision

  Claims 1, 2, 7–12, and 17–20 are unpatentable as obvious; claims 3–6 and 13–16 were not shown unpatentable because the asserted Watanabe combinations were unsupported.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–38). Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute and applies Petitioner’s proposed level of skill. PO Resp. 6. We find that Petitioner’s proposal is reasonable and consistent with the ’832 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). Thus, we apply Petitioner’s proposal in our analysis.” slip op. at 13

  • Prior constructionPrior construction adoptedDecided for petitioner

    “In our Institution Decision, we construed “determin[ing] a viewing window for the visual content as a function of progress through the progress length” as “requiring determining a viewing window for different times of the video.” Inst. Dec. 21. Neither party disputes this construction. PO Resp. 7; Pet. Reply 1–7. We maintain this same construction.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Thomason are in the same field of endeavor. Thomason describes a camera and method for correctly orientating pictures from the camera. See, e.g., Ex. 1004 ¶¶ 1, 2 29–40, Figs. 3a–3b. In particular, Thomason is interested in rotating and cropping images to reduce the effect of poor orientation. Pet. 9 (citing Ex. 1004 ¶¶ 2, 34, 36). Pacurariu likewise describes aligning and resizing/cropping of a captured image to correct poor orientation. See, e.g., Ex. 1005 ¶¶ 1, 3, 45–56, Figs. 5A–5C. The preponderance of the evidence also supports that a person having ordinary skill in the art would have had reason to combine the Pacurariu’s teachings with Thomason to predictably improve Thomason. Thomason teaches correct rotation of video data and makes use of rotation sensor to correct rotated images. Pet. 19–21 (citing, e.g., Ex. 1004 ¶¶ 4, 27, 29, 35; Ex. 1002 ¶¶ 76–77). Pacurariu similarly uses sensors and measures tilt angle of the camera. Id at 21–22 (citing, e.g., Ex. 1005 ¶¶ 51–52, Fig. 6; Ex. 1002 ¶ 78). Pacurariu further teaches that its tilt data angle can be stored for each “video frame.” Id. at 22 (citing Ex. 1005 ¶ 52). Petitioner, with support from credible testimony of Dr. Katsaggelos, explains how the teachings of Thomason and Pacurariu could be successfully combined. Id. at 23 (citing, for example, Ex. 1002 ¶ 81). A person of ordinary skill in the art could have known that Thomason’s system could be improved by saving rotation data for each video frame and correcting images on a frame-by-frame basis. Id. at 23–24. The testimony of Dr. Katsaggelos is credible in this regard. Ex. 1002 ¶¶ 80–81. Petitioner and Dr. Katsaggelos explain the references’ teachings and, based on these teachings, assert that a person having skill in the art would have had reason to combine with reasonable expectation of success based on those teachings. Reason to combine may properly come from the references themselves. KSR Int’l Co., 550 U.S. at 418 (explaining reason to combine may come from “interrelated teachings of multiple patents”). Based on the evidence presented, Petitioner establishes by a preponderance of the evidence that a person having ordinary skill in the art would have had reason to combine the teachings of Thomason and Pacurariu with a reasonable expectation of success. Ex. 1002 ¶¶ 76–81, 89–92; Ex. 1004 ¶¶ 4, 8–9, 27, 29, 35; Ex. 1005 ¶¶ 26, 41, 46, 51–52, 55–57, Figs. 6, 7.” slip op. at 27

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for patent owner

    “evaluating nexus between the claimed invention and objective evidence of nonobviousness, also referred to as secondary considerations. Lectrosonics, Inc. v. Zaxcom, Inc., IPR2018-01129, Paper 33 at 33 (PTAB Jan. 24, 2020) (precedential). We first consider whether Patent Owner has demonstrated “that its products are coextensive (or nearly coextensive) with the challenged claims,” resulting in a rebuttable presumption of nexus. Id. at 33. If not, that “does not end the inquiry into secondary considerations”; “the patent owner is still afforded an opportunity to prove nexus by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. (quoting Fox Factory, 944 F.3d at 1373–75).” slip op. at 62

  Patent outcomesUS 11,336,832 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,336,832

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.