• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Oct 5, 2026 · IPR2025-00438 · APJ Lilan Ren · IPR · Final written decision

  Claims 1–5, 7–13, and 16–20 are unpatentable; the Board found the challenged claims unpatentable on the grounds set out in its conclusions and summary table.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner’s definition of the level of ordinary skill in the art, and Petitioner’s definition appears consistent with the disclosures of the ’466 patent and the prior art of record. Accordingly, we adopt Petitioner’s definition. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). C. Claim Construction” slip op. at 12

  • BurdenUnpatentable

    “Decision under 35 U.S.C. § 318(a) as to the patentability of the challenged claims of the ’466 patent. For the reasons discussed below, we determine Petitioner has established by a preponderance of the evidence that claims 1– 5, 7–13, and 16–20 of the ’466 patent are unpatentable.” slip op. at 2

  Patent outcomesUS 10,569,466 unpatentable
  Nonecites Phillips · KSR · Graham
  Patents in suitUS 10,569,466
• Gettattle, Inc. v. Afterwords, Inc.All claims unpatentable
  PTAB · Oct 5, 2026 · IPR2025-00677 · APJ Ryan H Flax · IPR · Final written decision

  Claims 1–7, 10, 13, 16, 18, and 19 are unpatentable as anticipated by Douglas and Ganesh; the revised contingent motion to amend is denied.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “record before us, we conclude that Petitioner proves by a preponderance of the evidence that each challenged claim of the ’811 patent is anticipated by Douglas and by Ganesh. Accordingly, we find that claims 1–7, 10, 13, 16, 18, and 19 of the ’811 patent are unpatentable. Moreover, we find that Patent Owner’s Revised Contingent Motion to Amend adds new matter in every proposed substitute claim, and, therefore, the motion is denied.” slip op. at 80

  • 112 supportMotion to amend, deniedDenied

    “Because the RMTA does not meet the foundational statutory and regulatory requirements, we decline to reach Petitioner’s arguments as to the asserted unpatentability of the proposed substitute claims. C. CONCLUSION ON REVISED MOTION TO AMEND Because the RMTA does not meet foundational statutory and regulatory requirements for a motion to amend, it is denied.” slip op. at 80

  Patent outcomesUS 10,430,811 unpatentable
  § 102 anticipationcites Phillips
  Patents in suitUS 10,430,811
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.Some claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00531 · APJ Hyun J Jung · IPR · Final written decision

  Claims 1–11 and 13–15 are unpatentable over the stated obviousness grounds; claim 12 was not shown unpatentable.

  RulingsFinal written decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Petitioner filed a Petition (Paper 2, “Pet.”) requesting institution of an inter partes review of claims 1–15 of the ’698 patent. Discretionary denial of institution was determined to be not appropriate in this proceeding, and the proceeding was referred to the Board. Paper 10. Pursuant to 35 U.S.C. § 314, we instituted an inter partes review of claims 1–15 of the ’698 patent on all presented challenges. Paper 11 (“Inst. Dec.”), 15.” slip op. at 2

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “Decision is issued pursuant to 35 U.S.C. § 318(a) and 37 C.F.R. § 42.73 (2025). For the reasons that follow, we determine that Shenzhen Tuozhu Technology Co., Ltd. (“Petitioner”) has shown by a preponderance of the evidence that claims 1–11 and 13–15, but not claim 12, of U.S. Patent No. 9,168,698 B2 (Ex. 1001, “the ’698 patent”) are unpatentable.” slip op. at 2

  Patent outcomesUS 9,168,698 mixed
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,168,698
• Tesla, Inc. v. Intellectual Ventures II LLCNo claims unpatentable
  PTAB · Aug 20, 2026 · IPR2025-00343 · APJ Scott A Daniels · IPR · Final written decision

  Claims 1–6 and 8–13 were not shown unpatentable because Petitioner did not establish a reason to combine Bucknell’s multiplexing techniques with Eckert.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedOther

    “Patent Owner does not expressly dispute Petitioner’s definition of a person of ordinary skill in the art. See generally PO Resp. On this record, Petitioner’s proposed level of ordinary skill in the art is not disputed and is consistent with our review and understanding of the technology and descriptions in the ’138 patent and the asserted prior art references. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). For purposes of this Decision, we rely on Petitioner’s proposed level of ordinary skill in the art.” slip op. at 12

  • Prior constructionPrior construction adoptedDecided for petitioner

    “1. a subset of radio bearers Petitioner points out that in IPR2022-01127 the Board “preliminarily determined that a subset of the plurality of radio bearers” means “less than all of the plurality of radio bearers.” Pet 12 (citing Ex. 1019, 18–19). Petitioner explains that, in the present proceeding, it has applied “the prior art in accordance with that construction; however, in view of the asserted grounds, no claim term requires express construction to find the Challenged Claims unpatentable.” Id. (citing Nidec 868 F.3d 1017). Patent Owner neither disputes the prior construction of “a subset of radio bearers,” nor offers additional constructions. See generally PO Resp. To the extent necessary, and in accordance with our prior determination, we construe “a subset of the plurality of radio bearers” to mean “less than all of the plurality of radio bearers.”” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed

    “bears pointing out that the specification of the ’138 patent appears to explain what “a single allocation” means: If there are multiple QoS requirements within a single 3GPP PDP context, a single physical allocation of radio resources may be made to the UE. In this manner, a single PDP context implies a single CCTrCh. This single physical allocation of radio resources provided to a UE is shared amongst a number of services, in proportion to their respective QoS requirements, for example in proportion to the signalled weight values (Stier). Ex. 1001, 9:36–43 (emphasis added). Petitioner’s expert, Dr. Ding, explains that the “abbreviation CCTrCh was understood in the art to refer to a transport channel known as the Coded Composite Transport Channel.” Ex. 1003 ¶ 88. Dr. Ding testifies that Eckert teaches selecting data for uplink within a determined TTI and scheduling the uplink transmission on a transport channel, E-DCH, where scheduling of the E-DCH in a UE is controlled by a base station. Eckert, [0012] (“[A] new dedicated transport channel called Enhanced Dedicated Channel (E-DCH) has been introduced for this purpose. The fundamental characteristics of this new transport channel include . . . scheduling controlled by the base station, also called NodeB in UMTS…” Id. ¶ 90. In addition to Eckert disclosing a single transport channel E-DCH, Petitioner argues that Eckert discloses using a “finite quantum of physical resources” where “[t]he ’138 patent disclosure parallels Eckert, with both the E-DCH and CCTrCH transport channels relating to a UMTS uplink, employing spreading codes in code division multiple access (CDMA), and Reply 6 (citing Ex. 1005, ¶¶ 3, 8, 15, 23; Ex. 1071 ¶¶ 17–20; Ex. 1011 ¶¶ 6, 51). We do not need to specifically interpret this claim phrase because there is no actual dispute as to the meaning of the claim language itself and because, ultimately, the construction of this phrase plays no part in our Decision.” slip op. at 15

  • BurdenNot shown unpatentable

    “D. Ground 1: Claims 1–4 and 8–11 – Alleged Obviousness over Eckert in view of Bucknell and Lohr-1 On the complete record now before us, Petitioner has not established a preponderance of evidence that claims 1–4 and 8–11 would have been obvious over Eckert, Bucknell, and Lohr-1. For the reasons explained below we determine that Petitioner has failed to show why a person of ordinary skill in the art would have modified Eckert in view of Bucknell in the manner claimed. We focus our analysis below on claim 1, and more specifically on those limitations for which the combination of Eckert and Bucknell is asserted. 1. Limitations [1.0]–[1.2] and the combination of Eckert and Bucknell The combination of Eckert and Bucknell is essential to each of Petitioner’s asserted grounds in this proceeding. Pet. 13. At the outset, we address this issue because our determination that Petitioner has failed to show why a person of ordinary skill in the art would have combined Eckert and Bucknell is dispositive as to all grounds.” slip op. at 20

  Patent outcomesUS 10,292,138 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,292,138
• Globus Medical, Inc. v. Spinelogik, Inc.All claims unpatentable
  PTAB · Jul 10, 2026 · IPR2025-00226 · APJ Matthew S Meyers · IPR · Final written decision

  Claims 1–5, 7, and 9 are unpatentable under §103 over Moskowitz and Steffee; the Board did not reach the Moskowitz-only ground and rejected the Hess ground.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner asserts that one of ordinary skill in the art would have had a bachelor’s or equivalent degree in mechanical engineering or a related discipline (e.g., biomedical or metals and materials engineering), and at least five years of experience consisting of (a) designing, developing, evaluating and/or using spine devices, (b) anatomy, physiology and biology of soft and calcified tissues including bone healing and fusion, and (c) biomechanical and functional loading of orthopedic implants. Pet. 17 (citing Ex. 1002 ¶ 49). Petitioner also asserts that “[m]ore education can supplement practical experience and vice versa.” Id. (citing Ex. 1002 ¶ 49). “Patent Owner does not dispute the proffered definition for a POSA.” PO Resp. 9. Based on the full record, we determine that Petitioner’s undisputed proposed level of skill is reasonable and consistent with the ’385 patent and the asserted prior art. Thus, for these reasons, we adopt Petitioner’s level of skill in the art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “1. “channel” Throughout the challenged claims, “channel” appears together with “curved” in the term “curved channel.” For example, claim 1 recites “the fusion member comprising a first curved channel and a second curved channel,” “a first anchoring member configured to insert through the first curved channel,” and “second anchoring member configured to insert through the second curved channel.” Ex. 1001, 26:58–59, 26:60–61, 26:65– 66. Prior to institution, Petitioner asserted that one of ordinary skill in the art would “understand the claim term ‘channel’ to refer to a passage through which something moves or is conveyed.” Pet. 18 (citing Ex. 1002 ¶ 54). And, for purposes of our Decision on Institution, we adopted Petitioner’s proposed construction as being “consistent with the intrinsic record.” Institution Dec. 10. the ’385 [p]atent is readily understood by a POSA in context without needing explicit construction” and the plain and ordinary meaning should apply. PO Resp. 9–10. According to Patent Owner, the ’385 patent “consistently uses ‘channel’ to refer to a pathway within the fusion member through which an anchoring member traverses” and “explicitly states that channels may have different shapes and sizes and need not have a constant diameter, indicating the patentee did not intend to narrow the term beyond its common understanding.” Id. Petitioner replies noting that Patent Owner’s understanding “is substantively identical to Petitioner’s construction (‘a passage through which something moves or is conveyed’), specifically applied to an anchoring member.” Pet. Reply 6 (Pet. 18; PO Resp. 9–10). Thus, Petitioner concludes that “[t]he parties thus agree with the Board’s construction.” Id. Based on the full record, we agree with Petitioner that the parties’ positions on the meaning of the term “channel” are “substantively identical.” Because we see no difference between the parties’ position on the meaning of “channel,” we continue to adopt Petitioner’s proposed construction as it is consistent with the plain language of the claims and Specification. See Pet. 18 (citing Ex. 1001, 9:42–44, 9:53–55, 10:63–66, 11:47–63, 14:25–31, 14:65–67, 16:32–35, 22:51–57, 24:55–67) (The Specification uniformly refers to a “channel” as “a passage through which something (e.g., an anchoring member) traverses.”).” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “between the spinous processes in order to decompress the spinal canal, and thus, “relieve pressure on the spinal cord and nerves by increasing the area of the spinal canal.” Ex. 1006, 1:32–34, 1:50–52, 2:1–6. In contrast, the ’385 patent identifies that “the goal is to achieve solid bony fusion between the involved endplates and eliminate the symptoms caused by motion and associated degenerative and other reactive changes between these unstable vertebral segments.” Ex. 1001, 1:53–57. Thus, Hess’s disclosed implant is designed to distract and stabilize the spinous processes, not to promote solid bony fusion between adjacent vertebral bodies. Consequently, we agree with Patent Owner that “converting Hess for intervertebral fusion would require eliminating its core dynamic stabilization functionality—directly contradicting Hess’s stated design objectives.” PO Resp. 42 (citing Ex. 1006, 2:5–26, 7:43–45). We also are not persuaded that Petitioner adequately explains why a person of ordinary skill would have modified Hess’s implant in the manner proposed. Petitioner contends that only “minimal modifications” to Hess’s shell dimension and shape would be required for intervertebral use. Pet. 61–67; Ex. 1002 ¶¶ 122–128. However, simply modifying the shape and size of Hess’s shell does not, without more, support a motivation to redesign Hess’s device from a posterior interspinous implant engaging spinous processes to an interbody implant positioned between vertebral bodies and anchored into vertebral bodies. Here, Hess discloses that modifying its dimensions serves to “preserv[e] mobility and alignment.” Ex. 1006, 7:5–7. Conversely, the ’385 patent’s fusion implant serves to limit mobility between vertebrae by achieving “solid bony fusion between the fusion member and the adjacent vertebral bodies.” Ex. 1001, 24:67–25:3. spinal fusion procedures” (id. at 6:49–52), we do not find that statement, without more, to disclose or suggest reconfiguring Hess’s interspinous implant as an “a fusion member configured to position between first and second vertebral bodies,” as required by limitation [1.1]. At most, Hess’s “adjunct to” statement suggests that the interspinous implant may be used in connection with, or in support of, a fusion procedure. It does not explain how or why Hess’s implant would be redesigned for placement between two adjacent vertebral bodies, nor does it teach that Hess’s locking wings would be reoriented or adapted to anchor into vertebral bodies rather than spinous processes. On this point, Mr. Culbert states that “[t]he only changes required to modify Hess for use as an intervertebral implant would be to modify the dimensions of Hess’s shell, which was ‘dimensioned and configured for placement between the spinous processes’” (Ex. 1002 ¶ 126 (citing Ex. 1006, 7:3–4)), but Mr. Culbert does not explain how Hess’s locking wings and guide tracks would be reoriented or adapted to function as anchoring members that are inserted into adjacent vertebral bodies rather as opposed to spinous processes. Instead, Mr. Culbert simply states that “Hess’s locking wings would engage and at least partially penetrate the superior and inferior adjacent vertebrae” (emphasis added) (Ex. 1002 ¶ 135) without explaining how or why one of ordinary skill in the art would have made the modification with a reasonable expectation of success.” slip op. at 17

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “modify Hess for use as an intervertebral implant would be to modify the dimensions of Hess’s shell, which was ‘dimensioned and configured for placement between the spinous processes’” (Ex. 1002 ¶ 126 (citing Ex. 1006, 7:3–4)), but Mr. Culbert does not explain how Hess’s locking wings and guide tracks would be reoriented or adapted to function as anchoring members that are inserted into adjacent vertebral bodies rather as opposed to spinous processes. Instead, Mr. Culbert simply states that “Hess’s locking wings would engage and at least partially penetrate the superior and inferior adjacent vertebrae” (emphasis added) (Ex. 1002 ¶ 135) without explaining how or why one of ordinary skill in the art would have made the modification with a reasonable expectation of success. Hess’s disclosure that its shell may have shape variations to match adjacent bone (Ex. 1006, 7:7–13) also does not adequately explain why a person of ordinary skill would have had a reason to redesign Hess’s device for a different intervertebral environment, or why such a redesign would and “anchoring members,” i.e., locking wings. And, to the extent Hess discloses matching the shell to “the profile of the adjacent bone when deployed” (Ex. 1006, 7:11–13), Hess never suggests adapting the shell for placement between two adjacent vertebral bodies or for use as a fusion cage, it discloses that the “shell 12 is dimensioned and configured for placement between the spinous processes of symptomatic disc levels” (id. at 7:2–4). Thus, we agree with Patent Owner that the proposed modification “minimizes the structural differences and conflicting functional objectives inherent in modifying a device intended for the posterior elements of the spine for use in the anterior load-bearing column” (emphasis omitted). PO Resp. 41. For the reasons discussed above, we determine that Petitioner’s reliance on Mr. Culbert’s testimony amounts to more than just providing a motivation to modify Hess. Here, it amounts to relying on expert testimony to supply a missing limitation. As such, Petitioner’s arguments are not persuasive to demonstrate that the prior art teaches the limitations of the claim by a preponderance of the evidence. See Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9, 16 (PTAB Aug. 24, 2022) (precedential) (explaining that relying on expert testimony “is particularly problematic in cases where, like here, expert testimony is offered not simply to provide a motivation to combine prior-art teachings, but rather to supply a limitation missing from the prior art.”).” slip op. at 18

  Patent outcomesUS 8,460,385 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,460,385
• Globus Medical, Inc. v. Spinelogik, Inc.All claims unpatentable
  PTAB · Jul 10, 2026 · IPR2025-00225 · APJ Matthew S Meyers · IPR · Final written decision

  Claims 1–6, 11, 12, and 15–17 are unpatentable: claims 1–4, 6, 11, 12, 15, and 17 over Blain; claims 5 and 16 over Blain, Bray, and Steffee.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner asserts that one of ordinary skill in the art would have had a bachelor’s or equivalent degree in mechanical engineering or a related discipline (e.g., biomedical engineering, metals and materials engineering), and at least five years of experience with a) designing, developing, evaluating and/or using spine devices, b) anatomy, physiology and biology of soft and calcified tissues including bone healing and fusion, and c) biomechanical and functional loading of orthopedic implants. Pet. 18–19 (citing Ex. 1002 ¶¶ 77–78). Petitioner also asserts that “[m]ore education can supplement practical experience and vice versa.” Id. (citing Ex. 1002 ¶ 78). “Patent Owner does not dispute the proffered definition for a POSA.” PO Resp. 10. proposed level of skill is reasonable and consistent with the ’805 patent and the asserted prior art. Thus, for these reasons, we adopt Petitioner’s level of skill in the art.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for petitioner

    “Based on the full record, we determine that “housing,” as it appears in the context of the term “delivery housing” is a component that is a part of the delivery mechanism (see Ex. 1001, 11:27–31) and that simply contains and guides another component during delivery. See Ex. 1001, 13:25–27, 21:30–50. Thus, we apply the ordinary meaning of “housing,” as it appears in the context of the term “delivery housing,” and address in the context of “delivery housing,” as recited by claims 2 and 4.” slip op. at 12

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “understanding of plain and ordinary meaning as set forth in the litigation.” Pet. Reply 13 (citing Ex. 1022, 2 (“channel . . . [that] has a curved path”)). Thus, Petitioner concludes that the parties agree on construction of “curved channel.” Id. at 13–14.10 9 Although the parties refer to “curved” alone or to a “curved channel,” we understand the parties to be referring to a “channel of the fusion member [that] is curved,” as recited in claims 5 and 16. 10 At oral argument, the parties confirmed that there was no dispute as to the meaning of “curved channel.” See Tr. 15:12–14 (Petitioner stating that “the term “curved channel” appears consistent with the plain language of the claims and Specification. Thus, we adopt the parties’ agreed-upon construction and construe a channel that is “curved” to mean a channel following a curved trajectory.” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “We have considered Petitioner’s arguments and evidence, and Patent Owner’s counterarguments and find, on the complete trial record, that Petitioner demonstrates, by a preponderance of the evidence, that Blain discloses “a fusion member for positioning between two vertebral bodies, the fusion member having a first plurality of channels, each channel of the first plurality of channels having an opening on a same side of the fusion member,” as recited by limitation 1.1. At the outset, we find Patent Owner fails to establish that any of the alleged differences between Blain’s “apertures and the ’805 [p]atent’s internal channel geometry” relate to any particular recitation in argued limitation 1.1. Although we acknowledge that claims 5 and 16 each requires curved trajectories (see, e.g., claim 5 reciting “each channel of the fusion member is curved”), limitation 1.1 does not recite such a feature. As Petitioner correctly notes, “[n]othing in the claim requires a special ‘internal channel geometry,’ ‘shaped block,[’] ‘curved tubular channels,’ non ‘straight-through’ apertures, or ‘flexible’ anchors.” Pet. Reply 14 (footnote omitted). See In re Self, 671 F.2d 1344, 1348 (CCPA 1982) (rejecting arguments “not based on limitations appearing in the claims”). Therefore, after reviewing the arguments and evidence, we determine that Petitioner has shown by a preponderance of the evidence that Blain discloses the subject matter of limitation 1.1.” slip op. at 19

  Patent outcomesUS 9,730,805 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,730,805
• Apple Inc. v. Smart Mobile Technologies LLCSome claims unpatentable
  PTAB · Jun 3, 2026 · IPR2022-00981 · APJ Jameson Lee · IPR · Remand

  On remand, claims 8–11, 13, 17, and 19 were held unpatentable over Rautiola, Regnier, and Sainton; claim 15 was not shown unpatentable.

  RulingsRemand decision

  • RemandMixed

    “8–11, 13, 15, 17, and 19, and remanded “for consideration of the patentability of those claims.” Id. at 14. We understand both the reversal and vacature are with respect to Ground 1 of alleged unpatentability, not Ground 2, because the Federal Circuit’s decision did not discuss anything relating to Ground 2. Paper 43. The parties agreed. Paper 44. In this remand proceeding, neither party requested the filing of additional briefing or evidence. In a telephone conference call, both parties expressed agreement with the Board (1) that “there is no issue regarding collateral estoppel or issue preclusion with respect to dependent claims 8– 11, 13, 15, 17, and 19, and (2) that the remand proceeding would not involve the Board revisiting any matter or issue concerning alleged obviousness of claims 1, 8, 9, 11, 13, 17, and 19 over Ground 2.4 Papers 43, 44. The parties also agreed that the remand proceeding would only involve the Board reviewing the alleged obviousness of dependent claims 8–11, 13, 15, 17, and 19 as obvious over Rautiola, Regnier, and Sainton. Id. We have authority to conduct this inter partes review under 35 U.S.C. § 6. This Final Written Decision on Remand is issued pursuant to 35 U.S.C. § 318(a) and 37 C.F.R. § 42.73. On the record before us, which is the same as the record before us at the time we issued the first final written decision (Paper 34), we determine that Petitioner has proved by a preponderance of the evidence that claims 8– 11, 13, 17, and 19, but not claim 15, of the ’936 patent are unpatentable over Rautiola, Regnier, and Sainton.” slip op. at 3

  • Expert testimonyPetitioner expert creditedDecided for patent owner

    “5. Petitioner’s Request to Discredit Dr. Cooklev’s Declaration Petitioner makes several arguments discrediting Dr. Cooklev’s declaration (Ex. 2031) and asserts that Dr. Cooklev’s declaration should be accorded little to no weight. Reply 13–14. We have already considered and rejected this request in the Final Written Decision issued on November 7, 2023. Paper 34, 21–23. Our reasoning need not be reiterated here. Petitioner does not persuade us that Dr. Cooklev’s declaration testimony should be accorded little to no weight.” slip op. at 15

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner does not dispute Petition’s definition of level of ordinary skill. See generally PO Resp. Patent Owner’s expert, Dr. Cooklev, accepts Dr. Kotzin’s proposed level of ordinary skill in the art. Ex. 2031 ¶ 24. We adopt Petitioner’s proposal regarding the level of ordinary skill in the art. This level of ordinary skill in the art is supported by the testimony of Dr. Kotzin (Ex. 1003 ¶¶ 20–22) and is consistent with the level reflected in the ’936 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “only when it is analogous to the claimed invention.” Airbus S.A.S. v. Firepass Corp., 941 F.3d 1374, 1379 (Fed. Cir. 2019). A prior art reference constitutes analogous art if it is “from the same field of endeavor” or “reasonably pertinent to the particular problem with which the inventor is involved.” In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004). The petitioner bears the burden of establishing that a reference is analogous art. See Sanofi-Aventis Deutschland GmbH v. Mylan Pharms. Inc., 66 F.4th 1373, 1377 (Fed. Cir. 2023).” slip op. at 16

  Patent outcomesUS 8,472,936 mixed
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,472,936
• Trove Brands, LLC v. Camelbak Products, LLCSome claims unpatentable
  PTAB · Jun 2, 2026 · IPR2025-00140 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–6 are unpatentable as obvious; claims 7–18 were not shown unpatentable because Ribarits does not disclose a mouthpiece disposed on the pivotal mount.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Trove contends that a person of ordinary skill in the art “would have had an undergraduate degree in mechanical engineering or equivalent coursework, and a year or more of experience in designing, prototyping, and/or manufacturing fluid containers or similar products” and that “[m]ore work experience may substitute for a lower level of education, and vice versa.” Pet. 15 (citing Ex. 1002 ¶ 25). While CamelBak offers “a similar, though slightly different level,” it nonetheless “discerns no material difference between the definitions provided by the parties for purposes of the Board’s decision in this proceeding.” PO Resp. 27. That being the case, we adopt Trove’s proposed definition of the level of skill in the art, as it is 2 JP 2002-211613A, published July 31, 2002 (Ex. 1004, “Nakajima”). 3 WO 2004/063042 A2, published July 29, 2004 (Ex. 1006, “Ribarits”). 4 US 4,485,963, issued Dec. 4, 1984 (Ex. 1007, “Panicci”). 5 US 6,523,711 B1, issued Feb. 25, 2003 (Ex. 1008, “Hughes”). reasonable and consistent with what is reflected in the asserted prior art and the specification of the ’250 patent. B. Claim Construction” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We will not bite. CamelBak’s original assertion—that the plain and ordinary meaning of the constituent parts of “mouth” and “piece” is “a piece (or part) that goes in the mouth”—underscores the fallacy of CamelBak’s additional physical contact requirement. PO Resp. 28 (emphasis added). Indeed, in support of that earlier assertion, CamelBak pointed to the very dictionary definition that we relied on at institution in construing “mouthpiece” as a part that either “goes in the mouth or to which the mouth is applied.” See id. at 31 (citing Ex. 2005 (emphasis added)). Even the original testimony of CamelBak’s own expert confirms that one skilled in the art “would understand that the term ‘mouthpiece’ is commonly known in the art as a part designed for a user’s mouth,” without any requirement for physical contact with the mouth. Ex. 2016 ¶ 58 (citing Ex. 2005) (emphasis added)). And nothing in the Specification limits that common understanding. Although, indisputably, the Specification contemplates an embodiment where the user physically contacts the mouthpiece with their teeth (i.e., a bite-actuated mouthpiece), it also contemplates an embodiment where the user simply inserts the bottle in their mouth and commences fluid flow by squeezing it. See Ex. 1001, 10:9–13. That disclosure supports a meaning of “mouthpiece” that simply requires placement in the opening of the user’s mouth without necessarily incurring physical contact with some portion of the mouth, such as the teeth, tongue, or lips. Indeed, had CamelBak wished to premise the meaning of “mouthpiece” on some sort of physical contact with the mouth, it knew how to do so. For instance, the independent claims of CamelBak’s earlier ’255 patent, which is the subject of the related 1137 IPR, are limited in just such a manner, as they recite “wherein the resilient mouthpiece is adapted to resiliently compress responsive to compressive forces applied to the resilient mouthpiece by a user’s teeth.” Ex. 2023, at 20–25 (emphasis added). Thus, we reject CamelBak’s attempt to narrow our construction of “mouthpiece” to something other than “a part (as of an instrument) that goes in the mouth or to which the mouth is applied.” Neither the intrinsic nor extrinsic evidence supports the narrower construction proposed by CamelBak.” slip op. at 11

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “In reply, Trove argues that CamelBak’s “novel” construction that the mouthpiece moves with rotational motion about that same axis of rotation defined by the two joint as the pivotal mount and in the same direction as the pivotal mount “are inconsistent with the claim language’s plain and ordinary meaning and find no support in the intrinsic and extrinsic record.” See Pet. Reply 16. But, because we find that, when properly construed, the claimed “pivotal movement with the pivotal mount” about “two joints that define a pivotal axis” requires that the mouthpiece rotate about the same axis and in the same direction as the pivotal mount, we reject Trove’s argument as unavailing. And, although we agree with Trove that Nakajima’s mouthpiece engages in counter-clockwise rotation about a “Second Pivot Axis” when Nakajima’s lid 4 is opened (id. at 20–22), that rotation is about a different axis—one defined by Nakajima’s protrusions 24 rather than the claimed “pivotal axis” defined by Nakajima’s hinge shafts 19—and in a different manner—an upward and counterclockwise path rather than the claimed “pivotal movement with the pivotal mount” defined by Nakajima’s lid 4. Finally, in an alternative theory, Trove and its expert use “image- manipulation tools” in an attempt to show that Nakajima’s mouthpiece engages in some initial “clockwise-rotation” with Nakajima’s lid as it is opened. See Pet. Reply 18–24. We reject that theory as entirely conjectural and unsupported by the evidence.” slip op. at 39

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable

    “We disagree. As discussed above, the proper construction of “for pivotal movement with the pivotal mount” requires that the mouthpiece mirror the rotational movement of the pivotal mount, i.e., rotate about the same axis as the pivotal mount and in the same direction as the pivotal mount. See supra § II.B.3. But Nakajima’s mouthpiece does neither, and, thus, does not exhibit the claimed “pivotal movement with the pivotal mount” about “two joints that define a pivotal axis for . . . the pivotal mount axis,” as properly construed.” slip op. at 36

  Patent outcomesUS 11,851,250 mixed
  Claim construction§ 103 obviousness
  Patents in suitUS 11,851,250
• Google LLC / Motorola Mobility LLC v. Multifold International Incorporated Pte. Ltd.No claims unpatentable
  PTAB · May 13, 2026 · IPR2025-00058 · APJ Arthur M Peslak · IPR · Final written decision

  Claims 1, 2, 4, 6, 9, 10, 12–14, and 18–20 were not shown unpatentable because Petitioner failed to establish its challenges by a preponderance of the evidence.

  RulingsFinal written decision

  • BurdenNot shown unpatentable

    “IV. CONCLUSION Weighing the competing evidence and testimony, we determine that Petitioner fails to establish by a preponderance of the evidence that the Challenged Claims of the ’494 patent are unpatentable.” slip op. at 85

  • ExcludeNot reached

    “III. PETITIONER’S MOTION TO EXCLUDE Petitioner moves to exclude Exhibits 2034–2038, paragraphs 38 and” slip op. at 84

  Patent outcomesUS 9,158,494 not shown unpatentable
  Nonecites KSR · Graham
  Patents in suitUS 9,158,494

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.