• Crowdstrike, Inc. v. Gosecure, Inc.Some claims unpatentable
  PTAB · Aug 12, 2026 · IPR2025-00070 · APJ Neil T Powell · IPR · Final written decision

  Claims 1, 3–7, and 9–21 are unpatentable as obvious; claims 2 and 8 were not shown unpatentable because the asserted art did not meet their construed limitations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “III. ANALYSIS LEVEL OF ORDINARY SKILL A. Petitioner explains the applicable level of skill in the art as follows: As of June 24, 2010, a person of ordinary skill in the art (POSITA) would be a person having a bachelor’s degree in computer science, computer engineering, or an equivalent, as well as two years of industry experience and who would have had a working knowledge of software security analysis, and dynamic malware analysis. Additional graduate education could substitute for professional experience, or significant experience in the field could substitute for formal education. Pet. 8 (Ex. 1003 ¶¶ 30–31). Patent Owner does not dispute Petitioner’s explanation of the level of skill in the art. See Ex. 2031 ¶¶ 15–16. We adopt Petitioner’s uncontested proposed level of ordinary skill in the art, which we find consistent with the level of ordinary skill in the art reflected by the ’872 patent and the prior art of record. See Okajima v.” slip op. at 12

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “We begin with the claim language in view of the Specification, which weighs heavily against Patent Owner’s position that we should rewrite “computer system” as narrowly referring to a “computing device.” PO Resp. 24. As Petitioner notes, the ’872 patent’s Specification uses “computer system” to refer to a wide range of equipment, from a component of a computing device, to a whole computing device, to a collection of computing devices. Reply 9–10 (citing Ex. 1001, 4:5–8, 11:15–18, 16:50–55). In one example, the Specification refers to “one or more other computer systems (e.g., protected network devices 136).” Ex. 1001, 18:52–53. Thus, the Specification lists “protected network devices 136” as only an example of “other computer systems,” demonstrating that “computer systems” refers to things other than protected network devices. Although Patent Owner may be correct that this passage more than a single computing device,” we find that other disclosures in the ’872 patent do. Specifically, the Specification uses the language “distributed computer system” when referring to numerous components, including “protected network devices” and an “IDS/IPS system.” Ex. 1001, 3:26–28; Reply 10. In addition to showing that a “computer system” is not limited to a single computing device, this conveys that a “computer system” according to the ’872 patent can include an IDS/IPS.” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Based on our review of the complete record, we find Petitioner’s arguments and evidence to be more persuasive. Patent Owner does not dispute Petitioner’s argument and evidence that capturing detailed information like Goel’s activity sources, activity targets, and association was recognized as enhancing threat analysis. Pet. 44 (citing Ex. 1003 ¶ 79); see PO Resp. 55–59; Sur-Reply 15–17. Additionally, contrary to Patent Owner’s suggestion, we find that the Petition does not propose incorporating Goel’s kernel hooks into Capalik’s system. See Pet. 41–46. Patent Owner contends that the Petition’s reference to modifying Capalik by “adding lines of code” suggests implementing the code disclosed in Goel include kernel hooks. Id. Notwithstanding Patent Owner’s assertion otherwise, this is an unpersuasive bodily incorporation argument, as the Petition never says an ordinarily skilled artisan would have used the exact lines of code from Goel in Capalik. Rather, the Petition says that an ordinarily skilled artisan would have had sufficient skill to implement straightforward code modifications to identify activity sources, targets, and associations: a [person of ordinary skill in the art] would have understood that modifying Capalik’s system (e.g., Linux-based) to additionally monitor, identify, and store each individual activity of an attack including “activity sources, activity targets, and associations” would have required straightforward modifications to programs/code instructions, which would have been well-within the skillset of a [person of ordinary skill in the art]. Pet. 46. Patent Owner argues that Petitioner does not explain how an ordinarily skilled artisan would have modified Capalik without using kernel hooks. Sur-Reply 17. But Patent Owner does not cite any evidence to counter Dr. Jakobsson’s testimony that an ordinarily skilled artisan would have had the skill to apply Goel’s general teaching of identifying sources, targets, and associations to Capalik’s system. Ex. 1003 ¶ 182. On the whole, the evidence does not support Patent Owner’s position that the combination would have required substantially increased detection risk. Moreover, even if the combination would have somewhat increased detection risk, Petitioner persuades us that an ordinarily skilled artisan still would have had reason to combine the references teachings. Patent Owner’s allegations of increased detection risk do not negate the undisputed evidence that the combination would have provided the advantage of improved threat analysis. Pet. 44 (citing Ex. 1003 ¶¶ 175–182). Ultimately, Patent Owner’s that activity logging be undetectable.” PO Resp. 56 (emphasis added) (citing Ex. 1004 ¶ 6). This exaggerates Capalik’s disclosure. Although the cited paragraph suggests that certain systems unfortunately may be detectable by some users, it does not convey that it is a requirement for the system to be categorically undetectable. See Ex. 1004 ¶ 6.8 In sum, Petitioner persuades us by a preponderance of the evidence that it would have been obvious to modify Capalik “to identify and store unauthorized activities including the activity source, activity target, and association of each activity.” Pet. 41–46; PO Resp. 55–59; Reply 20–22; Sur-Reply 15–17.” slip op. at 47

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for patent owner

    “arguments and evidence, we determine that Patent Owner fails to sufficiently show a nexus between any of its objective indicia evidence and the claimed invention. See Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (“The patentee bears the burden of showing that a nexus exists”). A showing of sufficient nexus is required to establish that the evidence relied upon traces its basis to a novel element in the claim, not to something in the prior art. Institut Pasteur & Universite Pierre Et Marie Curie v. Focarino, 738 F.3d 1337, 1347 (Fed. Cir. 2013). Objective evidence that results from something that is not “both claimed and novel in the claim” lacks a nexus to the merits of the invention. In re Kao, 639 F.3d 1057, 1068 (Fed. Cir. 2011) (emphasis omitted). Thus, establishing nexus involves a showing that novel elements in the claim, not prior-art elements, account for the objective evidence of nonobviousness. Id. As discussed above, Petitioner shows that Capalik teaches all limitations of claim 1. Petitioner persuades us that none of claim 1’s elements individually nor any combination thereof is novel over Capalik’s disclosure. Accordingly, claim 1 is not novel over Capalik, which disproves Patent Owner’s assertion of nexus. PO Resp. 73–76. Moreover, even if claim 1 were novel, Patent Owner otherwise fails to show nexus for its commercial success, praise, or copying assertions. Patent Owner’s evidence does not show that Petitioner’s commercial product embodies claim 1. For example, we agree with Petitioner that Patent Owner “failed to analyze any meaningful detail regarding” how the Falcon Platform allegedly meets limitation 1(d). Reply 28–29. In particular, Patent Owner has not sufficiently addressed limitation 1(d) with the following argument: “1[D] The Falcon Platform transmitted to other computer systems” slip op. at 37

  Patent outcomesUS 9,954,872 mixed
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 9,954,872
• Tesla, Inc. v. Charge Fusion Technologies, LLCAll claims unpatentable
  PTAB · Jul 13, 2026 · IPR2025-00153 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of one of ordinary skill in the art at the time of the invention. Tesla submits that one of ordinary skill in the art would have had at least a bachelor’s degree in electrical or mechanical engineering (or an equivalent field) and at least two years of work experience involving automotive systems, including electric vehicle power management. . . . Additional industry 1 US 2009/0313034 A1, pub. Dec. 17, 2009 (Ex. 1004, “Ferro”). 2 EP 1,920,968 A1, pub. May 14, 2008 (Ex. 1005, “Oyobe”). 3 US 7,124,691 B2, iss. Oct. 24, 2006 (Ex. 1006, “Donnelly”). 4 Steven E. Letendre, The V2G Concept: A New Model for Power? PUBLIC UTILITIES FORTNIGHTLY, Feb. 15, 2002, at 16 (Ex. 1007, “Letendre”). 5 US 5,654,621, iss. Aug. 5, 1997 (Ex. 1078, “Seelig”). 6 US 6,662,083 B1, iss. Sep. 16, 2003 (Ex. 1010, “Knockeart”). experience or technical training may offset less formal education, while advanced degrees or additional formal education may offset lesser levels of industry experience. Pet. 2 (citing Ex. 1003 ¶¶ 14–15). Charge Fusion “takes no position with respect to Petitioner’s proposed level of ordinary skill.” PO Resp. 17. For purposes of our analysis, we apply Tesla’s proposed level of ordinary skill, which we find to be consistent with the problems addressed in the ’987 patent and the prior art. B. Claim Interpretation” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “1. “dynamic attribute of an electric charge provider” In the Petition, Tesla proposes that we construe “dynamic attribute of an electric charge provider,” as recited in every independent claim, to mean “a changing or otherwise fluctuating cost (or price) of electricity for purchase from an electric charge provider.” Pet. 4–5. Charge Fusion responds that Tesla improperly narrows the meaning of this claim limitation. PO Resp. 15 (arguing this claim term “is not just limited to ‘changing or otherwise fluctuating cost (or price)’ as alleged by the Petition” (emphasis added)). Although we consider Tesla’s proposed construction to identify an exemplary “dynamic attribute of an electric charge provider,” we see no need to limit the meaning of this limitation as proposed by Tesla. Indeed, Tesla agrees. See Pet. Reply. 7 (arguing only that this claim limitation “at least includes” such an example). And Charge Fusion does not contend otherwise. See PO Resp 15 (arguing only that this limitation “is not just limited to” cost fluctuations). As such, we see no need to further construe this claim limitation. 2. “determine . . . a charging schedule for the vehicle” Limitation 1[g] recites “determine, based at least on the one or more charging preferences and at least one current value of a dynamic attribute of an electric charge provider, a charging schedule for the vehicle.” Independent claim 8, 15, and 22 recite a materially identical limitation. Tesla submits that this limitation should not be construed as a means-plus- function limitation under 35 U.S.C. § 112(6). See Pet. 5. Charge Fusion agrees that “nothing in the claim invokes [§] 112(6).” PO Resp. 16. As such, we discern no dispute regarding the meaning of this claim limitation.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “Initially, we note that, as claimed, there is no express restriction on the manner in which the “amount” or “charge” is specified or otherwise expressed. Indeed, the Specification uses both “desired charge percent level” and “desired charge range level” as alternative ways for a user to specify an “amount of charge.” Ex. 1001, 14:53–15:8 (emphases added). The Specification defines “desired charge range level” as meaning “a desired distance to travel.” Id. at 15:3–8. Elsewhere, the Specification describes that a user may specify the amount of charge as follows: “the user may indicate a desired charging level (and/or a desired charging level may be automatically calculated) based on a desired distance of travel.” Id. at 19:49–57 (emphasis added). More specifically, annotated Figure 7 of the ’987 patent, reproduced below, demonstrates how a user may select “amount of charge” in terms of a desired mileage range 720 or a percentage level 718. See Pet. Reply 2. As shown in red, annotated Figure 7 illustrates that a user selects “desired charge level 720” on “vehicle charge indicator 714” by moving a slider to a value specified in “miles” (e.g., 110 miles). The Specification, after discussing selecting a desired charge percent level 718, explains: The user may also or alternatively view and/or change the desired charge range level 720. An estimate of how far the vehicle can travel on a given charge amount (which may be a general average and/or may be computed based on a specific itinerary and/or past driving habits) can be determined, for example, and utilized to express the desired charge level in terms of distance capable of being traveled. In such a manner, for example, a user may determine a desired distance to travel (e.g., how far it is from home to work or vice versa) and may set the desired charge range level 720 to match the desired distance. Ex. 1001, 14:65–15:8. Thus, the Specification confirms that “amount of charge” may be expressed in terms of a desired mileage as well as a desired percentage level.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree. Charge Fusion’s reliance on Wonderland is misplaced and does not support the proposition for which it is cited. In Wonderland, the district court denied the accused infringer’s motion for summary judgment of invalidity, in part, because genuine issues of material fact existed as to whether there was sufficient motivation to combine the prior art. Wonderland, 988 F. Supp. 2d at 511. As such, the district court’s Wonderland decision does not constitute a final ruling on the motivation to combine issue, and the Federal Circuit’s summary affirmance of the district court’s ruling neither addresses the issue nor reflects how the issue was resolved at trial. See Wonderland NurseryGoods Co. v. Thorley Indus., LLC, 644 F. App’x 1011 (Fed. Cir. 2016). Moreover, contrary to Charge Fusion’s assertion, Tesla correctly notes that although Ferro refers to wireless charging, it provides no implementation details. Ex. 1004 ¶ 36; Ex. 2006, 54:8–55:9. Nonetheless, Ferro does describe manual options for initiating charging, and Tesla’s expert credibly testifies that one of ordinary skill in the art would have been motivated to apply Oyobe’s vehicle sensor to allow a user to initiate Ferro’s charging methods more easily without having to leave the vehicle. See Ex. 1003 ¶¶ 146, 151, 152 (citing Ex. 1004 ¶ 109). Accordingly, we find that Tesla establishes that one of ordinary skill in the art would have been motivated to incorporate Oyobe’s use of a sensor to establish presence of a vehicle near a charging station into Ferro’s system.” slip op. at 17

  Patent outcomesUS 11,631,987 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 11,631,987
• Tesla, Inc. v. Charge Fusion Technologies, LLCAll claims unpatentable
  PTAB · Jul 13, 2026 · IPR2025-00152 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–17 are unpatentable as obvious: claims 1–4, 6–9, and 11–14 over Sutardja, Donnelly, and Letendre; claims 5, 10, and 15 with Seelig; claims 16 and 17 with Knockeart.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of one of ordinary skill in the art at the time of the invention. Tesla submits that one of ordinary skill in the art would have had at least a bachelor’s degree in electrical or mechanical engineering (or an equivalent field) and at least two years of work experience involving automotive systems, including electric vehicle power management. . . . Additional industry experience or technical training may offset less formal education, 1 US 2008/0136371 A1, pub. Jun. 12, 2008 (Ex. 1011, “Sutardja”). 2 US 7,124,691 B2, iss. Oct. 24, 2006 (Ex. 1006, “Donnelly”). 3 Steven E. Letendre, The V2G Concept: A New Model for Power? PUBLIC UTILITIES FORTNIGHTLY, Feb. 15, 2002, at 16 (Ex. 1007, “Letendre”). 4 US 5,654,621, iss. Aug. 5, 1997 (Ex. 1078, “Seelig”). 5 US 6,622,083 B1, iss. Sep. 16, 2003 (Ex. 1010, “Knockeart”). while advanced degrees or additional formal education may offset lesser levels of industry experience. Pet. 2–3 (citing Ex. 1003 ¶ 29). Charge Fusion “takes no position with respect to Petitioner’s proposed level of ordinary skill in the art.” PO Resp. 9. For purposes of our analysis, we apply Tesla’s proposed level of ordinary skill, which we find to be consistent with the problems addressed in the ’788 patent and the prior art. B. Claim Interpretation” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “shown in Figure 7 of the ’788 patent. Pet. 4–5. Charge Fusion responds that Tesla’s proposed construction should be rejected because it “wrongly import[s] embodiments from the specification.” PO Resp. 14–16. We discern no dispute over the meaning of “unitary vehicle charge indicator” because, contrary to what Charge Fusion argues, Tesla does not contend that this limitation is “required to be limited to” the bar graph embodiment of Figure 7, only that it “at least includes” that embodiment. Compare Pet. 5, with PO Resp. 14–16. Tesla also argues that the “first” and “second” portions of the unitary vehicle charge indicator—which indicate the charged and uncharged capacities of the battery—recite merely “communicative content,” and thus, are “not entitled to any patentable weight” because they are directed to nonfunctional printed matter. Pet. 5–7 (citing various case law). At the same time, however, Tesla maintains that “[r]egardless, Donnelly teaches a bar graph indicating the amount of charge and uncharged capacity.” Pet. Reply 11–12 (citing Pet. 33–34); see also Hrg. Tr. 74:22–25, 75:9–11. For reasons expressed below, we agree that Tesla persuasively demonstrates that the asserted combination teaches the “unitary vehicle charge indicator element” as claimed and construed by Charge Fusion. Accordingly, we need not decide the printed matter issue.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “Initially, we note that, as claimed, there is no express restriction on the manner in which the “amount” or “charge” is specified or otherwise expressed. Indeed, the Specification uses both “desired charge percent level” and “desired charge range level” as alternative ways for a user to specify an “amount of charge.” Ex. 1001, 14:63–15:18 (emphases added). In particular, the Specification defines “desired charge range level” as meaning “a desired distance to travel.” Id. at 15:8–18. Elsewhere, the Specification describes that a user may specify the amount of charge as follows: “the user may indicate a desired charging level (and/or a desired charging level may be automatically calculated) based on a desired distance of travel.” Id. at 19:59–67 (emphasis added).” slip op. at 9

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “full charge” for the battery, and thus, Tesla fails to explain how the combination of Sutardja with Donnelly’s battery bar graph image “would allow a user to select a specific amount of charge or how this would result in a unitary vehicle charge indicator,” as claimed. PO Resp. 30. According to Charge Fusion, “[l]imiting the single option of ‘full charge’ as described in Sutardja would defeat the purpose of implementing a slider” as taught by Donnelly. Id. (citing Ex. 2008 ¶ 72). We disagree. Charge Fusion’s argument rests on the mistaken premise that Sutardja only contemplates selecting a full amount of charge for the battery and not an amount below a full charge, i.e., a partial charge. But that is not what Sutardja says. More accurately, Sutardja teaches that the user specifies the amount of charge—"The user interface module 108 may comprise a key pad, a display, a microphone, and/or a speaker (all not shown). A user of the vehicle 102-1 may use the user interface module 108 to set charging parameters for charging the battery 14.” Ex. 1011 ¶ 243. Elsewhere, Sutardja teaches that the user may set a “predetermined level” of charge— The charge monitoring module 150 may inform the control module 112 when the battery 14 is charged to a predetermined level (e.g., full charge) that may be indicated in the charging parameters. Subsequently, the charge monitoring module 150 may stop charging the battery 14 by deactivating the converter 156 and the charging module 152. The power meter 24 may measure the amount of power received from the utility company 23 during the charging operation. Id. ¶ 270 (emphases added). Although that passage indicates that a “full charge” is an example of a “predetermined level” of charge, nowhere does it exclude the selection of a lesser amount. Indeed, the passage contemplates the ability to “stop charging the battery,” which indicates that selection of the predetermined level may be less than a full charge. Id. Thus, we are not persuaded by Charge Fusion’s argument to the contrary. Rather, in our view, Tesla demonstrates by a preponderance of the evidence that the Sutardja-Donnelly combination teaches a “unitary vehicle charge indicator” that includes at least “first” and “second” portions and that one of ordinary skill in the art would have had reason to successfully combine their respective teachings in a manner that allows a user to predetermine, i.e., specify, an amount of charge. slip op. at 17

  Patent outcomesUS 11,990,788 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 11,990,788
• Klipsta Pty Ltd v. Lindsay AlbaneseSome claims unpatentable
  PTAB · Jul 10, 2026 · IPR2025-00346 · APJ Annette R Reimers · IPR · Final written decision

  Claim 16 is unpatentable as obvious over the asserted grounds; claims 1–15, 17, and 18 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). Petitioner contends that a person having ordinary skill in the art at the time of the invention (“POSITA”) “would be a regular consumer/shopper with a rudimentary knowledge of the use of magnetic clips and a basic understanding of clip construction.” Pet. 13. We find that the ’047 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of skill reflected in these references and in the ’047 patent is consistent with the definition of a person of ordinary skill in the art proposed by Petitioner. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10

  • BurdenMixed

    “Petitioner’s mapping of the components of KR ’458’s fastening device is insufficient. Although Petitioner maps the center line of fastening member 115 to the recited second end, Petitioner fails to adequately map the recited first end of the second strap or explain why one of skill in the art would consider the second ferromagnetic member (convex member 117) to be disposed at the first end of the second strap as required by claim 1. that the first end is “upward to connector 117.” Pet. 24. This is not the end of the second strap. As discussed above, the end of the second strap wraps around rectangular ring 210 and is then secured to itself.7 Connector 117 is positioned below the true end of the strap, more in the middle of this segment of the strap. In other words, Petitioner arbitrarily defines the strap as only the portion of hat holder 110 between the center line and connector 117, in contradiction to what KR ’458 actually discloses. Nowhere does Petitioner explain why connector 117 is disposed at the first end of the second strap. Neither does Petitioner explain why we should disregard the true end of the strap, nor why one of skill in the art would consider only a middle portion of the strap to be the second strap. Thus, Petitioner has not satisfied its burden in this regard. Therefore, Petitioner has not shown that KR ’458 discloses “a second strap having a first end and a second end, the second strap joined to the first strap,” with “a second ferromagnetic member disposed at the first end of the second strap.” For the foregoing reasons, we determine that a preponderance of the evidence does not support that claim 1 is anticipated by KR ’458.” slip op. at 23

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner

    “The ’047 patent discloses that in addition to being separate straps, the rear strap and the front strap “can be formed from a single piece of material.” Ex. 1001, 3:40–44, 5:24–32, 10:18–25. In particular, Figures 5A–5B of the ’047 patent illustrate rear strap 510 and front strap 520 as being “formed from a single piece of material that is folded approximately in half where a first half can be the rear strap 510 and a second half can be the front strap 520.” Id. at 10:18–21, Figs. 5A–5B. Indeed, Patent Owner acknowledges “[i]t should be noted that forming the first and second straps from a single piece of material is well within the scope of the claimed invention.” Ex. 1007, 5 (citing the ’047 patent at 3:37–44). Moreover, we note the positions taken by the parties are consistent with the fact that claim second strap are formed from a single folded strap.” Ex. 1001, 14:47–48. We, therefore, adopt Petitioner’s construction of “the second strap joined to the first strap” to include “a single piece of material.”” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for patent owner

    “Petitioner’s construction of a “hook” to include a “structure that serves to attach the hat holder to another object” is based on function, rather embodiments in the Specification of the ’047 patent. Although strap-style hook 340 of Figures 3A–3C is a flexible component rather than a more rigid component like hook 140 shown in Figures 1A–1C , both can be considered types of hooks. All of the embodiments, whether rigid or flexible, can be considered to have a hook-like structure when serving the function of attaching the hat holder to another object. Petitioner’s proposed construction would render the term “hook” meaningless, as various types of structures could be used to attach the hat holder to another object, that would not reasonably be considered to be a “hook.” For example, a snap, safety pin, ring, or button could be used to attach a hat holder to another object. Petitioner’s identification of different embodiments in the ’047 patent of hook-like structures does not show why one of skill in the art would consider almost any structure to be considered a “hook.” We, therefore, reject Petitioner’s construction of a “hook” as a “structure that serves to attach the hat holder to another object.” “wherein the first strap and the second strap are configured to retain a” slip op. at 12

  Patent outcomesUS 10,413,047 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,413,047
• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.No claims unpatentable
  PTAB · Jul 10, 2026 · IPR2025-00147 · APJ Linda E Horner · IPR · Final written decision

  The Board found claims 1–6 and 8–20 not shown unpatentable under three obviousness grounds, principally because the proposed combinations did not establish a feasible curved battery or transparent potting encapsulating the components.

  RulingsFinal written decision

  • Skill levelSkill level board ownOther

    “at least a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, or equivalent experience, and at least two years’ experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors. Pet. 8 (citing Ex. 1002 ¶ 29). Petitioner also contends that a person of ordinary skill would have been “familiar with, e.g., sensor system design, including inertial and other motion sensor system design, and signal processing” and that “[a] higher level of education or skill might make up for less experience, and vice versa.” Id. Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. Resp. 25. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’124 patent and the references cited in the Petition.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “We need not reach the issue of whether the preamble is limiting for purposes of determining patentability of the challenged claims. Even were we to agree with Patent Owner that the preamble is limiting and the claims are limited to a finger-worn ring wearable computer device, Petitioner has relied on Schröder in each ground to disclose a “wearable computing device configured to be worn around a finger of a wearer.” Pet. 22 (Ground 1), 45 (Ground 2, relying on Yuen for adding the functionality of light sources with a photodetector, temperature sensors, and varying the sampling frequency of sensor data acquisition), 56 (Ground 3). We agree with Petitioner that Schröder discloses such a device. Thus, no explicit claim construction is necessary for this decision.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successReasonable expectation not foundNot shown unpatentableNot shown unpatentable

    “We are not persuaded by Petitioner’s arguments and find that Patent Owner has the better position for several reasons. First, the record supports Patent Owner’s argument that Mestas’s batteries are much too large to fit within a ring form factor, and “would have to be reduced in size on the 6 There is no Exhibit 2022 in the record of this case. magnitude of 5-10x from its current size to fit in a ring of Schröder.” Resp. 38 (citing Dr. Anthony’s cross-examination testimony at Ex. 2021, 313:12). Second, Petitioner relies on evidence in the Reply that Petitioner failed to specifically identify in the Petition. Compare Reply 3–5 (citing Ex. 1369 ¶¶ 7–14; Ex. 1079 ¶¶ 47, 71; Ex. 2022, 138:7–143:1; Ex. 1002 ¶¶ 96, 337; Ex. 2021, 12–13, 307:7–17; Ex. 2020, 212:6–214:13; Ex. 1081, 130:18–131:14; Ex. 1010 ¶ 168), 9 (referring back to Section § II.B.2) with Pet. 25–26 (citing Ex. 1002 ¶¶ 193–99; Ex. 1010 ¶¶ 157, 163, 168, 201, Fig. 6). More specifically, while the portion of Dr. Anthony’s Declaration cited in the Petition (see Pet. 25–26 (citing Ex. 1002 ¶¶ 193–99)) mentions the Technology Background Section V of his Declaration (Ex. 1002 ¶¶ 42–147), neither Petitioner nor Dr. Anthony sufficiently explains what evidence supports his opinion that it was feasible to incorporate batteries or battery-like devices into finger-rings, or how a person of ordinary skill in the art would have miniaturized a curved battery for incorporation into Schröder’s ring. Ex. 1002 ¶ 196 (describing that rechargeable batteries powering wearable electronic devices were “well-known by 2013” and “had also undergone significant advances in terms of miniaturization and energy density [that] made it feasible to incorporate batteries or battery-like devices such as supercapacitors into smaller form factors, such as finger rings, without sacrificing functionality” such as “lithium-polymer (Li-Po) batteries and solid-state batteries.”). Moreover, some of Petitioner’s citations in the Reply appear to be incorrect as there is no Exhibit 2022 of record in this case, as noted above. These issues undermine the strength of Petitioner’s showing by making it difficult to follow its reasoning, much less identify where in the record that reasoning finds support. See DeSilva v. DiLeonardi, 181 F.3d 865, 866–67 (7th Cir. 1999) (“A brief must make all arguments accessible to the judges, rather than ask them to play archaeologist with the record.”); United States v. Dunkel, 927 F.2d 955, 956 (7th Cir. 1991) (“Judges are not like pigs, hunting for truffles buried in briefs.”). Third, even considering Petitioner’s new Reply arguments and” slip op. at 27

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “We credit Dr. Mercier’s testimony over Dr. Anthony’s and agree that Dr. Anthony’s testimony fails to account for the constraints of a substantially smaller form factor in Schröder’s finger-ring as compared to Mestas’s wrist device. Ex. 2018 ¶ 140. Although large curved batteries suitable for use in a wrist band or other larger wearable device, such as shown in Mestas, were known at the time of the ’124 patent, we also have evidence that prior art “finger ring wearables up to the ’124 patent had used ‘coin’ type batteries.” Resp. 40 (citing Ex. 2018 ¶ 140). We credit Dr. Mercier’s testimony that a person having ordinary skill in the art would have looked to a coin type battery for the necessary power requirements of Schröder’s device. Ex. 2018 ¶ 141. Indeed, this testimony is consistent with the other art of record that consistently shows the use of flat batteries in finger-ring devices, often stacked above and protruding from the general ring shape of the device. See, e.g., Ex. 1005 (Niwa), Figs. 22, 28; Ex. 2025 (Asada ’701 patent), Fig. 4; Ex. 1035 (Rhee), Figs. 7-1, 8-1, 8-2; Ex. 1037 (Asada article), Fig. 9; Ex. 1034 (Asada ’199 patent), Fig. 2; Ex. 1028 (Kimura patent), Fig. 24; Ex. 2018 ¶¶ 74–84. In fact, Oura’s first-generation ring design, released in 2015, used a Superbowl ring type design, with the battery and other components mounted on top of the ring. Ex. 2034; Ex. 2018 ¶ 85. We also agree with Dr. Mercier that Dr. Anthony’s testimony lacks evidence or a technical analysis of the power requirements for the various sensors he suggests including in a wearable device and the capacity of the proposed GMBPow battery. See, e.g., Ex. 1002 ¶¶ 94, 210, 214–17; Ex. 2018 ¶ 97. Moreover, Dr. Anthony does not address the issues with the batteries that are identified in the references he discusses. For example, Dr. Anthony does not address Lee’s disclosure that “direct coating of electrode slurry onto plain paper led to the occasional internal-shorting of the device due to the leakage of the electrode material through a large-sized hole in the paper.” Ex. 1019, 2415. In contrast, Dr. Mercier discusses the pitfalls the skilled artisan faced in developing finger-ring devices. See, e.g., Ex. 2018 ¶¶ 77–79 (discussing the issues Rhee’s and Asada’s large rings), 83 (identifying power requirements as a design constraint). For example, Dr. Mercier explains that “flexible or curved batteries include flexible packaging materials such as aluminum laminated films that house the electrodes and electrolyte” such that “once the battery packaging is added to a battery such as GMBPow and then placed within a housing (e.g., external housing shell and internal potting), the resulting device would have dimensions that are not suitable for a finger-worn ring.” Id. ¶ 96 (citing Ex. 2026).” slip op. at 34

  Patent outcomesUS 11,188,124 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,188,124
• Globus Medical, Inc. v. Spinelogik, Inc.All claims unpatentable
  PTAB · Jul 10, 2026 · IPR2025-00226 · APJ Matthew S Meyers · IPR · Final written decision

  Claims 1–5, 7, and 9 are unpatentable under §103 over Moskowitz and Steffee; the Board did not reach the Moskowitz-only ground and rejected the Hess ground.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner asserts that one of ordinary skill in the art would have had a bachelor’s or equivalent degree in mechanical engineering or a related discipline (e.g., biomedical or metals and materials engineering), and at least five years of experience consisting of (a) designing, developing, evaluating and/or using spine devices, (b) anatomy, physiology and biology of soft and calcified tissues including bone healing and fusion, and (c) biomechanical and functional loading of orthopedic implants. Pet. 17 (citing Ex. 1002 ¶ 49). Petitioner also asserts that “[m]ore education can supplement practical experience and vice versa.” Id. (citing Ex. 1002 ¶ 49). “Patent Owner does not dispute the proffered definition for a POSA.” PO Resp. 9. Based on the full record, we determine that Petitioner’s undisputed proposed level of skill is reasonable and consistent with the ’385 patent and the asserted prior art. Thus, for these reasons, we adopt Petitioner’s level of skill in the art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “1. “channel” Throughout the challenged claims, “channel” appears together with “curved” in the term “curved channel.” For example, claim 1 recites “the fusion member comprising a first curved channel and a second curved channel,” “a first anchoring member configured to insert through the first curved channel,” and “second anchoring member configured to insert through the second curved channel.” Ex. 1001, 26:58–59, 26:60–61, 26:65– 66. Prior to institution, Petitioner asserted that one of ordinary skill in the art would “understand the claim term ‘channel’ to refer to a passage through which something moves or is conveyed.” Pet. 18 (citing Ex. 1002 ¶ 54). And, for purposes of our Decision on Institution, we adopted Petitioner’s proposed construction as being “consistent with the intrinsic record.” Institution Dec. 10. the ’385 [p]atent is readily understood by a POSA in context without needing explicit construction” and the plain and ordinary meaning should apply. PO Resp. 9–10. According to Patent Owner, the ’385 patent “consistently uses ‘channel’ to refer to a pathway within the fusion member through which an anchoring member traverses” and “explicitly states that channels may have different shapes and sizes and need not have a constant diameter, indicating the patentee did not intend to narrow the term beyond its common understanding.” Id. Petitioner replies noting that Patent Owner’s understanding “is substantively identical to Petitioner’s construction (‘a passage through which something moves or is conveyed’), specifically applied to an anchoring member.” Pet. Reply 6 (Pet. 18; PO Resp. 9–10). Thus, Petitioner concludes that “[t]he parties thus agree with the Board’s construction.” Id. Based on the full record, we agree with Petitioner that the parties’ positions on the meaning of the term “channel” are “substantively identical.” Because we see no difference between the parties’ position on the meaning of “channel,” we continue to adopt Petitioner’s proposed construction as it is consistent with the plain language of the claims and Specification. See Pet. 18 (citing Ex. 1001, 9:42–44, 9:53–55, 10:63–66, 11:47–63, 14:25–31, 14:65–67, 16:32–35, 22:51–57, 24:55–67) (The Specification uniformly refers to a “channel” as “a passage through which something (e.g., an anchoring member) traverses.”).” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “between the spinous processes in order to decompress the spinal canal, and thus, “relieve pressure on the spinal cord and nerves by increasing the area of the spinal canal.” Ex. 1006, 1:32–34, 1:50–52, 2:1–6. In contrast, the ’385 patent identifies that “the goal is to achieve solid bony fusion between the involved endplates and eliminate the symptoms caused by motion and associated degenerative and other reactive changes between these unstable vertebral segments.” Ex. 1001, 1:53–57. Thus, Hess’s disclosed implant is designed to distract and stabilize the spinous processes, not to promote solid bony fusion between adjacent vertebral bodies. Consequently, we agree with Patent Owner that “converting Hess for intervertebral fusion would require eliminating its core dynamic stabilization functionality—directly contradicting Hess’s stated design objectives.” PO Resp. 42 (citing Ex. 1006, 2:5–26, 7:43–45). We also are not persuaded that Petitioner adequately explains why a person of ordinary skill would have modified Hess’s implant in the manner proposed. Petitioner contends that only “minimal modifications” to Hess’s shell dimension and shape would be required for intervertebral use. Pet. 61–67; Ex. 1002 ¶¶ 122–128. However, simply modifying the shape and size of Hess’s shell does not, without more, support a motivation to redesign Hess’s device from a posterior interspinous implant engaging spinous processes to an interbody implant positioned between vertebral bodies and anchored into vertebral bodies. Here, Hess discloses that modifying its dimensions serves to “preserv[e] mobility and alignment.” Ex. 1006, 7:5–7. Conversely, the ’385 patent’s fusion implant serves to limit mobility between vertebrae by achieving “solid bony fusion between the fusion member and the adjacent vertebral bodies.” Ex. 1001, 24:67–25:3. spinal fusion procedures” (id. at 6:49–52), we do not find that statement, without more, to disclose or suggest reconfiguring Hess’s interspinous implant as an “a fusion member configured to position between first and second vertebral bodies,” as required by limitation [1.1]. At most, Hess’s “adjunct to” statement suggests that the interspinous implant may be used in connection with, or in support of, a fusion procedure. It does not explain how or why Hess’s implant would be redesigned for placement between two adjacent vertebral bodies, nor does it teach that Hess’s locking wings would be reoriented or adapted to anchor into vertebral bodies rather than spinous processes. On this point, Mr. Culbert states that “[t]he only changes required to modify Hess for use as an intervertebral implant would be to modify the dimensions of Hess’s shell, which was ‘dimensioned and configured for placement between the spinous processes’” (Ex. 1002 ¶ 126 (citing Ex. 1006, 7:3–4)), but Mr. Culbert does not explain how Hess’s locking wings and guide tracks would be reoriented or adapted to function as anchoring members that are inserted into adjacent vertebral bodies rather as opposed to spinous processes. Instead, Mr. Culbert simply states that “Hess’s locking wings would engage and at least partially penetrate the superior and inferior adjacent vertebrae” (emphasis added) (Ex. 1002 ¶ 135) without explaining how or why one of ordinary skill in the art would have made the modification with a reasonable expectation of success.” slip op. at 17

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “modify Hess for use as an intervertebral implant would be to modify the dimensions of Hess’s shell, which was ‘dimensioned and configured for placement between the spinous processes’” (Ex. 1002 ¶ 126 (citing Ex. 1006, 7:3–4)), but Mr. Culbert does not explain how Hess’s locking wings and guide tracks would be reoriented or adapted to function as anchoring members that are inserted into adjacent vertebral bodies rather as opposed to spinous processes. Instead, Mr. Culbert simply states that “Hess’s locking wings would engage and at least partially penetrate the superior and inferior adjacent vertebrae” (emphasis added) (Ex. 1002 ¶ 135) without explaining how or why one of ordinary skill in the art would have made the modification with a reasonable expectation of success. Hess’s disclosure that its shell may have shape variations to match adjacent bone (Ex. 1006, 7:7–13) also does not adequately explain why a person of ordinary skill would have had a reason to redesign Hess’s device for a different intervertebral environment, or why such a redesign would and “anchoring members,” i.e., locking wings. And, to the extent Hess discloses matching the shell to “the profile of the adjacent bone when deployed” (Ex. 1006, 7:11–13), Hess never suggests adapting the shell for placement between two adjacent vertebral bodies or for use as a fusion cage, it discloses that the “shell 12 is dimensioned and configured for placement between the spinous processes of symptomatic disc levels” (id. at 7:2–4). Thus, we agree with Patent Owner that the proposed modification “minimizes the structural differences and conflicting functional objectives inherent in modifying a device intended for the posterior elements of the spine for use in the anterior load-bearing column” (emphasis omitted). PO Resp. 41. For the reasons discussed above, we determine that Petitioner’s reliance on Mr. Culbert’s testimony amounts to more than just providing a motivation to modify Hess. Here, it amounts to relying on expert testimony to supply a missing limitation. As such, Petitioner’s arguments are not persuasive to demonstrate that the prior art teaches the limitations of the claim by a preponderance of the evidence. See Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9, 16 (PTAB Aug. 24, 2022) (precedential) (explaining that relying on expert testimony “is particularly problematic in cases where, like here, expert testimony is offered not simply to provide a motivation to combine prior-art teachings, but rather to supply a limitation missing from the prior art.”).” slip op. at 18

  Patent outcomesUS 8,460,385 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,460,385
• Globus Medical, Inc. v. Spinelogik, Inc.All claims unpatentable
  PTAB · Jul 10, 2026 · IPR2025-00225 · APJ Matthew S Meyers · IPR · Final written decision

  Claims 1–6, 11, 12, and 15–17 are unpatentable: claims 1–4, 6, 11, 12, 15, and 17 over Blain; claims 5 and 16 over Blain, Bray, and Steffee.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner asserts that one of ordinary skill in the art would have had a bachelor’s or equivalent degree in mechanical engineering or a related discipline (e.g., biomedical engineering, metals and materials engineering), and at least five years of experience with a) designing, developing, evaluating and/or using spine devices, b) anatomy, physiology and biology of soft and calcified tissues including bone healing and fusion, and c) biomechanical and functional loading of orthopedic implants. Pet. 18–19 (citing Ex. 1002 ¶¶ 77–78). Petitioner also asserts that “[m]ore education can supplement practical experience and vice versa.” Id. (citing Ex. 1002 ¶ 78). “Patent Owner does not dispute the proffered definition for a POSA.” PO Resp. 10. proposed level of skill is reasonable and consistent with the ’805 patent and the asserted prior art. Thus, for these reasons, we adopt Petitioner’s level of skill in the art.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for petitioner

    “Based on the full record, we determine that “housing,” as it appears in the context of the term “delivery housing” is a component that is a part of the delivery mechanism (see Ex. 1001, 11:27–31) and that simply contains and guides another component during delivery. See Ex. 1001, 13:25–27, 21:30–50. Thus, we apply the ordinary meaning of “housing,” as it appears in the context of the term “delivery housing,” and address in the context of “delivery housing,” as recited by claims 2 and 4.” slip op. at 12

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “understanding of plain and ordinary meaning as set forth in the litigation.” Pet. Reply 13 (citing Ex. 1022, 2 (“channel . . . [that] has a curved path”)). Thus, Petitioner concludes that the parties agree on construction of “curved channel.” Id. at 13–14.10 9 Although the parties refer to “curved” alone or to a “curved channel,” we understand the parties to be referring to a “channel of the fusion member [that] is curved,” as recited in claims 5 and 16. 10 At oral argument, the parties confirmed that there was no dispute as to the meaning of “curved channel.” See Tr. 15:12–14 (Petitioner stating that “the term “curved channel” appears consistent with the plain language of the claims and Specification. Thus, we adopt the parties’ agreed-upon construction and construe a channel that is “curved” to mean a channel following a curved trajectory.” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “We have considered Petitioner’s arguments and evidence, and Patent Owner’s counterarguments and find, on the complete trial record, that Petitioner demonstrates, by a preponderance of the evidence, that Blain discloses “a fusion member for positioning between two vertebral bodies, the fusion member having a first plurality of channels, each channel of the first plurality of channels having an opening on a same side of the fusion member,” as recited by limitation 1.1. At the outset, we find Patent Owner fails to establish that any of the alleged differences between Blain’s “apertures and the ’805 [p]atent’s internal channel geometry” relate to any particular recitation in argued limitation 1.1. Although we acknowledge that claims 5 and 16 each requires curved trajectories (see, e.g., claim 5 reciting “each channel of the fusion member is curved”), limitation 1.1 does not recite such a feature. As Petitioner correctly notes, “[n]othing in the claim requires a special ‘internal channel geometry,’ ‘shaped block,[’] ‘curved tubular channels,’ non ‘straight-through’ apertures, or ‘flexible’ anchors.” Pet. Reply 14 (footnote omitted). See In re Self, 671 F.2d 1344, 1348 (CCPA 1982) (rejecting arguments “not based on limitations appearing in the claims”). Therefore, after reviewing the arguments and evidence, we determine that Petitioner has shown by a preponderance of the evidence that Blain discloses the subject matter of limitation 1.1.” slip op. at 19

  Patent outcomesUS 9,730,805 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,730,805
• Resmed Corp. v. Cleveland Medical Devices, Inc.All claims unpatentable
  PTAB · Jun 29, 2026 · IPR2025-00246 · APJ Cynthia M Hardman · IPR · Final written decision

  Claims 15–29 are unpatentable as obvious over the asserted combinations; the contingent motion to amend claims 30–41 is denied for lack of written-description support.

  RulingsFinal written decision

  • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner

    “Patent Owner filed an authorized Motion to Terminate, alleging that Petitioner failed to name its corporate parent, ResMed Inc., as a real party in interest. Paper 39. Petitioner filed an opposition. Paper 42. Patent Owner filed a reply. Paper 43. We denied the Motion to Terminate. Paper 51.” slip op. at 3

  • Skill levelSkill level board ownOther

    “understanding of a person of ordinary skill in the art at the time the invention was made.10 See Graham, 383 U.S. at 17–18. The parties agree that a person of ordinary skill in the art (sometimes referred to herein as “POSITA”) would have had: at least a bachelor’s degree in mechanical engineering, electrical engineering, computer science, biomedical engineering, or a similar technical field, with at least two years of relevant product design experience working with diagnostic sensor systems and network data systems, such as networked PAP machines. Additional experience could substitute for less education, and additional education could likewise substitute for less experience. Pet. 3–4 (citing Ex. 1003 (Kirkness Decl.) ¶ 44); PO Resp. 4. 9 Patent Owner does not assert any objective indicia of nonobviousness. See generally PO Resp. 10 For purposes of this Decision, we apply a priority date of November 4, 2005. See supra n.4. Because the proposed level of ordinary skill in the art is consistent with the cited prior art and is undisputed on this record, we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level).” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Patent Owner does not persuade us to construe the term as “a value [or calculated value] that indicates how dire a patient’s symptoms are.” Patent Owner points to nothing in the intrinsic record that purportedly supports this construction, and we agree with Petitioner that “the patent specification’s disclosures regarding determining a level of symptom severity are broad, establishing that it can generally be derived from any sensor data and/or breathing events.” Pet. Reply 3–4; see also Ex. 1001, 3:44–46 (“Signals from the[] sensors are then analyzed to determine the level of severity of the symptoms of the subject’s sleep disorder.”). Patent Owner relies only on expert declarations to support its construction. But as indicated by the Federal Circuit, extrinsic evidence is “less significant than the intrinsic record in determining ‘the legally operative meaning of claim language.’” Phillips v. AWH Corp., 415 F.3d 1303, 1317 (Fed. Cir. 2005). This is especially applicable here, where neither Dr. D’Ambrosio’s nor Dr. Schwartz’s declaration was prepared for this proceeding, and neither declarant was subject to cross examination on their opinions. Moreover, neither of the declarants was opining on claim construction; rather, they were addressing indefiniteness and/or written description issues. See Ex. 1058 at 7 (heading addressing definiteness); Ex. 2026 at 18 (heading addressing written description). Further, Dr. Schwartz appears to have been making an argument about certain patent claims (not the challenged ’333 patent) based on Patent Owner’s own statements made during prosecution of a separate patent application. See Ex. 2026 ¶ 47 (“[T]he similar term used in the ’284 patent claims (‘data of severity of sleep disorder symptoms’) does not find written description support in the specification by a disclosure of the same statistics disclosed in Wright, because CleveMed argued those statistics are not related to severity of sleep disorder symptoms.” (emphasis added)). Patent Owner has not persuaded us that Dr. Schwartz’s testimony has direct applicability to the claim term at issue here. Dr. Borkholder’s testimony is likewise unpersuasive. Aside from citing Dr. D’Ambrosio’s and Dr. Schwartz’s declarations, Dr. Borkholder cites Exhibits 2027 and 2016. These exhibits discuss indices such as AHI and RDI that are used to assess the severity of a patient’s symptoms, but Patent Owner has not adequately explained how they bear on construction of the claim term at issue here, which is not addressed in these exhibits. Ex. 2022 ¶¶ 32–33. Accordingly, we accord Dr. Borkholder’s claim construction opinions little weight, because they are unsupported by reference to objective, corroborating evidence of record. See, e.g., Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985) (“Lack of factual support for expert opinion going to factual determinations . . . may render the testimony of little probative value in a validity determination.”); Xerox Corp. v. Bytemark, IPR2022-00624, Paper 9, 15 (PTAB 2023) (precedential) (explaining that declaration testimony that “is conclusory and unsupported” and which “adds little to the conclusory assertion for which it is offered to support . . . is entitled to little weight”).” slip op. at 23

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “We find that Petitioner has the better argument. Tidal volume refers to “the volume of air that is inspired or expired during a respiratory cycle.” Ex. 2028, 13–14; PO Resp. 10. “[H]ypopnea events are defined as a reduction of ≥50 % or 74 % in tidal volume from baseline and apnea events as absence of tidal volume for at least 10s.” Ex. 2028, 13–14 (emphasis omitted). Toge teaches that a control unit analyzes collected data (e.g., the flow rate) and calculates tidal volume. Ex. 1044 (Toge) ¶¶ 34–38. The calculated tidal volume is “a quantified level of severity data based on the subject’s sleep apnea symptoms during the therapy” because it represents, e.g., the “level of airway obstruction the patient experiences during the sleep apnea treatment using the PAP device.” Pet. 15. As Dr. Chatterjee explains: Toge discloses that tidal volume Fp is a quantified level of data because Toge discloses that Fp is monitored with respect to threshold values (id., [0051]) and because Fp is a function of Ft, Fa, and Fb, which are quantitative values. Toge discloses that tidal volume Fp is severity data because Toge discloses that tidal volume is indicative of whether the patient’s breathing warrants “emergency measures” (id., [0039]) and whether to “send an alert” in “an emergency where the patient’s breathing has drastically weakened” (id., [0055]). . . . . Because Toge discloses determining tidal volume (determine a quantified level of severity data) based on Ft, Fa, and Fb (id., [0035]), which corresponds to the subject’s condition (subject’s sleep apnea symptoms) while using the device (during the therapy) (id., [0036], [0037]), Toge discloses determin[ing] a quantified level of severity data based on the subject’s sleep apnea symptoms during the therapy. Ex. 1005 (Chatterjee Decl.) ¶¶ 122–125. Patent Owner’s attempt to dismiss tidal volume as a mere “breathing metric” is unavailing. First, Petitioner correctly “notes that in the paragraph PO cites to in Dr. Schwartz’s declaration, he indicates that breathing metrics are a level of severity data.” Pet. Reply 8 (citing Ex. 2026 ¶ 46 (“standard sleep disordered breathing metrics” [ ] were well validated indicators of the type and severity of sleep disordered breathing”)). Second, Dr. Kirkness explains that tidal volume represents the level of airway obstruction, e.g., apnea “is the most severe form of reduction in airflow [and] the absence of airflow results in quantified tidal volume of zero milliliters per breath.” Ex. 1003 (Kirkness Decl.) ¶¶ 157, 159; see also PO Resp. 10–11 (Patent Owner recognizing that an apnea is defined as absence of tidal volume for at least 10 seconds). The calculated tidal volume thus indicates severity because it is used to adjust the PAP system, e.g., in the case of decreasing tidal volume, a medical professional can change the airflow settings “to counter/treat the more severe level of airway obstruction observed from the decreasing tidal volume.” Ex. 1003 (Kirkness Decl.) ¶ 158; Pet. 15–16; Ex. 1044 (Toge) ¶ 39.” slip op. at 26

  Patent outcomesUS 11,857,333 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,857,333
• Resmed Corp. v. Cleveland Medical Devices, Inc.No claims unpatentable
  PTAB · Jun 29, 2026 · IPR2025-00247 · APJ Cynthia M Hardman · IPR · Final written decision

  Claims 1–19 were not shown unpatentable under any of six obviousness grounds because Truitt did not teach or suggest the claimed severity calculation and index, and the Mumford combinations lacked the required sensor disclosures.

  RulingsFinal written decision

  • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner

    “Patent Owner filed an authorized Motion to Terminate, alleging that Petitioner failed to name its corporate parent, Resmed Inc., as a real party in interest. Paper 29. Petitioner filed an opposition. Paper 31. Patent Owner filed a reply. Paper 32. We denied the Motion to Terminate. Paper 40.” slip op. at 2

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “disorder symptoms” require a “quantitative” calculation or use of an algorithm, we also disagree. See PO Resp. 14–16. First, nothing in the language of the claims themselves describes or requires a “quantitative” calculation or an algorithm. See generally Ex. 1001, 23:6–26:59. To be sure, the ’029 patent discloses embodiments that use known algorithms to “quantify the level of severity of the subject’s sleeping disorder or symptoms.” See, e.g., id. at 20:16–19. But the Specification does not require an algorithm. The Specification also indicates that quantification is merely “preferable” (i.e., not required), and is merely one embodiment. See, e.g., id. at 19:8–12 (“The signals from the one or more sensors used in various embodiments of the present invention are preferably analyzed using a processor and software that can quantitatively estimate or determine the severity of the subject’s sleeping disorder or symptoms.”) (emphasis added), 4:51–59 (“Finally, in still another embodiment, the present invention includes a sleeping disorder treatment system comprising a device for diagnosing and creating a quantitative output of a level of severity of a subject’s sleeping disorder or symptoms . . . .”) (emphasis added); see also Reply 5–6 (citing Ex. 1001, 4:3–59 and 19:8–12 and stating that the ’029 patent lists “numerous embodiments where only one of seven include a quantitative assessment”). Elsewhere, the Specification more generally states that signals from sensors are “analyzed to determine the level of severity of the symptoms,” without specifying that such analysis must be “quantitative” or performed by an algorithm. See Ex. 1001, 3:41–44. In view of these disclosures, Patent Owner does not persuade us to adopt its narrowing claim construction. Indeed, our reviewing court has “repeatedly warned against confining the claims” to specific embodiments disclosed in the Specification. Phillips, 415 F.3d at 1323. Patent Owner’s reliance on a prior Board decision in PGR2024- 00012, which related to the parent of the ’029 patent, is unavailing. See PO Resp. 15–16. We agree with Petitioner that in the cited case, “[t]he Board made no findings about the meaning of the term calculating ‘the data of a severity of the sleep disorder symptoms of the subject’ for claim construction.” Reply 8. Indeed, neither party offered any claim construction, and the Board determined that no claim construction was necessary for purposes of that decision. See ResMed Corp., PGR2024- 00012, Paper 7 at 8. The page of the decision Patent Owner cites addresses written description support in the specification for the claims challenged in that PGR, not claim construction. See id. at 16. In any event, the cited decision is a decision on institution. The Board’s statements there are, by nature, preliminary findings and conclusions based on a preliminary record, and are not binding here. For at least the above reasons, Patent Owner does not persuade us to adopt its narrowing claim construction and we find that the term “data of a severity” does not need construction because the words of the term are clear on their face.” slip op. at 31

  • Strike new argumentNew argument disregardedDecided for patent owner

    “skilled artisan would have incorporated only portions of Mumford’s algorithm into Truitt’s PAP (i.e., only those portions related to “the detection of sleep disordered events” and not the portions of the algorithm related to “determin[ing] sleep stage”) comes too late because this argument was not in the Petition. See, e.g., Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286–87 (Fed. Cir. 2017) (rejecting petitioner’s “attempts to cure the petition’s deficiencies in its subsequent briefing to the Board”). The Petition does not discuss modifying Mumford’s sleep efficacy algorithm before incorporating it into Truitt’s PAP device or incorporating only certain features of the algorithm. Indeed, the Petition and Dr. Kirkness rely on Mumford’s ability to detect sleep arousals when mapping Mumford to the claimed “data of a severity” and “index.” See Pet. 69–70; Ex. 1003 (Kirkness Decl.) ¶¶ 323–325. Mumford discloses that the mask electrodes detect arousals. See Ex. 1009 (Mumford) 2:4–10, 11:39–48. The same lack of disclosure plagues Petitioner’s belated Reply argument that Truitt’s ports 74 and 76 can incorporate electric sensing elements that would have functioned similar to Mumford’s electrodes. See Reply 22. The Petition did not mention ports 74 and 76 or otherwise suggest that a skilled artisan would have added functionality similar to Mumford’s electrodes to Truitt’s PAP, and we find that it is too late on Reply for Petitioner to posit this modification.” slip op. at 40

  • Expert testimonyPetitioner expert creditedPatent owner expert creditedMixed

    “significant than the intrinsic record in determining ‘the legally operative meaning of claim language.’” Phillips v. AWH Corp., 415 F.3d 1303, 1317 (Fed. Cir. 2005). This is especially applicable to Dr. Jafari’s opinions. His declaration was not prepared for this proceeding and thus Dr. Jafari was not subject to cross examination in this proceeding. See Reply 6 n.3. Moreover, Dr. Jafari was not opining on claim construction; rather, he was addressing the alleged indefiniteness. See Ex. 2020 (Jafari Decl.) 12 (heading addressing definiteness), ¶¶ 41–42, 46. Additionally, paragraphs 41–42 of Dr. Jafari’s declaration discuss claim terms phrases in a different patent (US 11,375,921), which explicitly include the terms “quantified” and “quantitative.” See Reply 6–7; Ex. 2020 (Jafari Decl.) ¶ 34. For at least these reasons, Patent Owner has not persuaded us that Dr. Jafari’s testimony is applicable here. Further, regarding the portion of Patent Owner’s proposed construction reciting “the degree of deviation from the baseline characteristics of a patient without sleep disorder symptoms,” Dr. Borkholder does not do his own analysis, but instead simply states that he “agree[s] with the litigation claim construction opinions of Dr. Jafari.” Ex. 2019 (Borkholder Decl.) ¶ 53. This is insufficient, and thus we do not credit Dr. Borkholder’s testimony regarding claim construction. We instead credit Dr. Kirkness’s statement that “[s]everity data is frequently calculated as the deviation from baseline characteristics of the patient himself, not a generic person ‘without sleep disorder symptoms.’” Ex. 1071 (Kirkness Reply Decl.) ¶ 13; Reply 9. As Dr. Kirkness explains, and Patent Owner does not dispute (see generally Sur-reply), “[t]he ‘baseline characteristics of a [generic] patient without sleep disorder symptoms’ would be irrelevant to any particular patient with their own unique breathing patterns and sleep disorder symptoms.” Ex. 1071 (Kirkness Reply Decl.) ¶ 13 (second alteration in original). For at least these reasons, we reject Patent Owner’s proposed claim construction.” slip op. at 30

  Patent outcomesUS 11,872,029 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,872,029
• GD Energy Products, LLC v. Kerr Machine CompanyAll claims unpatentable
  PTAB · Jun 29, 2026 · PGR2025-00031 · APJ Ryan H Flax · PGR · Final written decision

  Claims 1–14 are unpatentable as obvious under each of four asserted grounds: Kerr; Aplex and Stanton; Blume, Stanton, and Wilkinson; and the sale of the Kerr Pump.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The person of ordinary skill in the art would have a minimum of a bachelor’s degree in mechanical or petrochemical engineering, or a comparable engineering discipline, and a minimum of 3-5 years of work experience in the design and/or manufacturing of reciprocating pumps and valves, including fluid ends and/or comparable high pressure fluid components, for industrial applications, including for use in the oil and gas industry. See, e.g., EX1003, ¶32.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We decline to expressly construe any claim language. slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Regarding the combining of Aplex and Stanton, Petitioner asserts that the ordinarily skilled artisan would have understood that providing a packing/stuffing arrangement, as taught by Stanton, within a fluid end housing, as taught by Aplex, would improve pressure and fluid isolation compared with an arrangement where the packing was bolted to the outside of the fluid end as in Aplex unmodified. Pet. 66 (citing Ex. 1003 ¶¶ 189, 236). Patent Owner does not dispute this rationale. We find this to be a reason, with rationale underpinning, why the person of ordinary skill in the art would have combined these references with a reasonable expectation of success.” slip op. at 29

  • Adverse judgmentOther

    “The record indicates that Patent Owner has statutorily disclaimed claim 15 as of April 28, 2025. Ex. 2206.” slip op. at 8

  Patent outcomesUS 12,152,582 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 12,152,582

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.