- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Altria Client Services LLC v. Yiwu Jingangke Trading Co., Ltd.Adverse judgmentPTAB · Oct 1, 2026 · PGR2026-00035 · APJ Robert L Kinder · PGR · Adverse judgment
The Board entered adverse judgment against Patent Owner for abandoning the contest and canceled the sole challenged claim.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“Pursuant to our rules, “[a]ctions construed to be a request for adverse judgment include . . . [a]bandonment of the contest.” 37 C.F.R. § 42.73(b)(4). Our prior order warned that a failure to respond would be construed as an abandonment of the contest under 37 C.F.R. § 42.73(b)(4), and that entry of judgment adverse to Patent Owner and cancellation of the challenged claim may follow. Show Cause Order, 2. Because Patent Owner did not respond by the September 15, 2026, deadline and has not entered an appearance in this proceeding, we determine that Patent Owner has abandoned the contest. Under these circumstances, we enter judgment adverse to the Patent Owner and cancel the challenged design claim.” slip op. at 2
None - PTAB · May 26, 2026 · IPR2025-00425 · APJ Kristina M Kalan · IPR · Remand
The Board denied institution of IPR2025-00425 because it instituted the earlier-considered IPR2025-00424 challenging the same patent.
RulingsRemand decision- RemandOther
“Request for Director Review. See Paper 35; IPR2025-00424, Paper 35. The request was denied without prejudice and the cases were remanded to the Board to “allow discovery, narrowly tailored to resolve the RPI and privity issues.” Paper 41, 4. Following such discovery, we were instructed to “then determine on the full record whether Petitioners have met their burden of demonstrating that the Petitions are not time-barred under § 315(b), applying the framework set forth in Worlds Inc. v. Bungie, Inc., 903 F.3d 1237, 1242– 44 (Fed. Cir. 2018).” Id. A later-issued Order Supplementing Director Review Decision instructed that “if the Board determines that Petitioners met their burden to identify all RPIs in the Petitions, then the Board should maintain at most one IPR challenging” the ’225 patent. Paper 64, 3. Concurrently herewith, we issue a decision in IPR2025-00424 finding that Petitioner has met its burden of demonstrating that the Petition in that case is not time-barred under 35 U.S.C. § 315(b).” slip op. at 3
- Other 314aInstitution denied discretionary otherInstitution denied
“In connection with the ’225 patent, Petitioner filed two petitions requesting inter partes review: the petition in this proceeding (IPR2025- 00425), and the petition in IPR2025-00424. In this proceeding and in IPR2025-00424, Petitioner filed an Explanation regarding the necessity of multiple petitions. Paper 2; IPR2025-00424, Paper 2. Petitioner requested that, “if the Board uses its discretion to institute the Petitions, the Board consider the merits of IPR2025-00424 . . . before IPR2025-00425.” Paper 2,” slip op. at 2
Discretionary denialPatents in suitUS 10,589,225 - Berkshire Hathaway Energy Company / Pacificorp v. Birchtech Corp.Institution deniedPTAB · May 20, 2026 · IPR2025-00423 · APJ Zhenyu Yang · IPR · Institution
The Board denied institution of IPR challenging claims 1–4 and 6–29 because it instituted the ranked IPR2025-00422 under the Director’s instruction to maintain at most one IPR.
RulingsInstitution decision- Parallel petitionsInstitution denied discretionary otherDenied
“Paper 34. Birchtech Corp. (“Patent Owner”) filed a Request for Director Review in each case. See Paper 40; IPR2025-00422, Paper 39. The Director denied the request without prejudice in each case and remanded the cases to the Board to “allow discovery, narrowly tailored to resolve the RPI and privity issues.” Paper 49, 4. The Director later issued an Order Supplementing Director Review Decision in each case, instructing that “if the Board determines that Petitioners met their burden to identify all RPIs in the Petitions, then the Board should maintain at most one IPR challenging” the ’430 patent. Paper 72, 3.” slip op. at 2
Discretionary denialPatents in suitUS 10,668,430 - Berkshire Hathaway Energy Company / Pacificorp v. Birchtech Corp.Institution deniedPTAB · May 18, 2026 · IPR2025-00278 · APJ David Cotta · IPR · Institution
The Board denied institution of Berkshire Hathaway Energy Company and PacifiCorp’s petition because it had instituted the earlier-filed IPR2025-00274 challenging the same patent.
RulingsInstitution decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“request from Patent Owner for Director Review, finding that Patent Owner introduced “evidence sufficient to put RPI and privity at issue” and remanding with instructions to “allow discovery, narrowly tailored to resolve the RPI and privity issues” including “at least materials sufficient to clarify the evidence the Board found to be ‘ambiguous’ and to avoid the need for the Board to ‘speculate as to the nature of the redacted material.’” Paper 57 (Decision on Request for Director Review). The Director instructed that after allowing such discovery, we “should then determine on the full record whether Petitioners have met their burden of demonstrating that the Petitions are not time-barred under § 315(b), applying the framework set forth in Worlds Inc. v. Bungie, Inc., 903 F.3d 1237, 1242–44 (Fed. Cir. 2018). Concurrently herewith, we issue a decision in IPR2025- 00278 finding that Petitioner has met its burden of demonstrating that its Petition is not time-barred under 35 U.S.C. § 315(b).” slip op. at 2
- Other 314aInstitution denied discretionary otherInstitution denied
“Review Decision instructing that “if the Board determines that Petitioners met their burden to identify all RPIs in the Petitions, then the Board should maintain at most one IPR challenging each of the ’114 patent, the ’517 patent, the ’430 patent, and the ’225 patent.” Paper 79, 3. Together with its Petition in this proceeding and the proceeding in IPR2025-00274, Petitioner filed an Explanation Regarding the Necessity of Multiple Petitions. Paper 2 (“Explanation”); IPR2025-00274, Paper 2. In the Explanation, Petitioner “request[s] that, if the Board uses its discretion to institute the Petitions, the Board consider the merits of IPR2025-00274 . . . before IPR2025-00278.” Explanation, 3. Further to Petitioner’s request, we first considered the merits of IPR2025-00274. For the reasons discussed in our concurrently issued decision in IPR2025-00274, we institute inter partes review on the grounds set forth in the Petition in IPR2025-00274. Further to the Director’s instruction that we “maintain at most one IPR challenging . . . the ’114 patent,” and the Petitioner’s request that we consider the merits of IPR2025-00274 before IPR2025-00278, we deny institution of the Petition in this proceeding.” slip op. at 3
Discretionary denialPatents in suitUS 10,343,114 - Berkshire Hathaway Energy Company / Pacificorp v. Birchtech Corp.Institution deniedPTAB · May 18, 2026 · IPR2025-00281 · APJ David Cotta · IPR · Institution
The Board denied institution because it had instituted IPR2025-00280 challenging the same patent, consistent with the Director’s instruction to maintain at most one IPR.
RulingsInstitution decision- Other 314aInstitution denied discretionary otherInstitution denied
“Review Decision instructing that “if the Board determines that Petitioners met their burden to identify all RPIs in the Petitions, then the Board should maintain at most one IPR challenging each of the ’114 patent, the ’517 patent, the ’430 patent, and the ’225 patent.” Paper 79, 3. Together with its Petition in this proceeding and the proceeding in IPR2025-00280, Petitioner filed an Explanation Regarding the Necessity of Multiple Petitions. Paper 2 (“Explanation”); IPR2025-00281, Paper 2. In the Explanation, Petitioner “request[s] that, if the Board uses its discretion to institute the Petitions, the Board consider the merits of IPR2025-00280 . . . before IPR2025-00281.” Explanation, 3. Further to Petitioner’s request, we first considered the merits of IPR2025-00280. For the reasons discussed in our concurrently issued decision in IPR2025-00280, we institute inter partes review on the grounds set forth in the Petition in IPR2025-00280. Further to the Director’s instruction that we “maintain at most one IPR challenging . . . the ’517 patent,” and the Petitioner’s request that we consider the merits of IPR2025-00280 before IPR2025-00281, we deny institution of the Petition in this proceeding.” slip op. at 3
Discretionary denialPatents in suitUS 10,596,517 - First Quality Retail Services, LLC / First Quality Consumer Products, LLC et al. v. Essity Hygiene And Health ABAll claims unpatentablePTAB · May 12, 2026 · IPR2024-01487 · APJ Kristina M Kalan · IPR · Final written decision
Claims 1–5, 7, 8, 20–22, 24, and 25 are unpatentable, based on anticipation by Bergstrom and obviousness over the stated combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In the Institution Decision, we adopted Petitioner’s definition. Dec. 9–10. In its Response, Patent Owner cites to Petitioner’s definition and states that Patent Owner “applies Petitioners’ definition.” PO Resp. 7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’138 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for petitioner
“We begin our analysis with the language of the claims. Phillips, 415 F.3d at 1312; see also SuperGuide Corp. v. DirecTV Enterprises, Inc., 358 F.3d 870, 874–875 (Fed. Cir. 2004) (“There is a ‘heavy presumption’ that the terms used in the claims ‘mean what they say and have the ordinary meaning that would be attributed to those words by persons skilled in the relevant art.’”). Claim 1 recites, in relevant part, “said fluid flow control structure being a layered structure comprising a non-perforated fibrous polymeric layer and a first perforated polymeric layer.” Ex. 1001, 13:62–64 (limitation [1h]). The plain language of claim 1 does not address additional properties of the perforated polymeric layer; the language of the dependent claims, however, imposes additional limitations on the properties of the perforated polymeric layer such as a particular basis weight (claim 2), a particular makeup (claim 3), a particular aperture size (claim 7), a particular open area (claim 8), and that it “is a three-dimensionally formed layer having penetrating apertures extending from a first surface of the first perforated polymeric layer towards a second surface of the first perforated polymeric layer and forming protrusions on said second surface” (claim 4). The dependent claims’ additional language indicates that the term “perforated” within the term “perforated polymeric layer” in claim 1 is not limited in the manner asserted by Patent Owner’s proposed construction.” slip op. at 12
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“layer pierced through with holes or apertures,” we are persuaded that Petitioner meets its burden as to this limitation. Petitioner argues that under our construction, Bergstrom’s express disclosure of forming element 60, and Bergstrom’s explanation of the properties of forming element 60, meets the claimed “perforated polymeric layer” limitation. Pet. 38–41 (citing Ex. 1002 ¶¶ 114–117). Even under Patent Owner’s proposed construction, Petitioner argues, forming element 60 would also allow free flow of liquid bodily waste. Pet. Reply 3– 4 (citing Ex. 1021 ¶¶ 20–23). Importantly, Bergstrom expressly discloses: “suitable materials for the forming element 60 are plastic films, perforated plastic films and reinforced tissue or reinforced nonwoven materials.” Ex. 1004, 10:1–4. This express disclosure is clear. Even though the forming element 60 in Bergstrom might be “typically” liquid-impermeable (Ex. 1004, 9:24–30), that does not preclude a layer that is perforated, particularly where Bergstrom expressly discloses a perforated plastic film as one of the possibilities for forming element 60. Ex. 1004, 10:1–4. Additionally, although Patent Owner focuses on Bergstrom’s disclosure that forming element 60 is “typically liquid-impermeable” (PO Resp. 58–60; Ex. 1004, 9:24–30), we do not view Bergstrom’s use of the word “typically” as mandating that the forming element always be liquid impermeable. We agree that the word “typically” does not mean “always” and that such a reading would render “typically” superfluous. Pet. Reply. 5. We do not find any ambiguity in Bergstrom’s disclosure regarding possible use of perforated plastic films for its forming element 60; whether or not the forming element 60 provides other functions (like stiffness) does not dictate whether it may also be perforated, or be part of a fluid flow control structure. On this point, we credit Petitioner’s arguments and explanation, as supported by Dr. Pourdeyhimi’s testimony. Pet. Reply 6–7; Ex. 1021 ¶ 27–28 (“components of absorbent articles could be multifunctional”).” slip op. at 20
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“from the start” (PO Resp. 29), and that “using all or part of [Glaug’s] fluid-acquisition system in place of [Nakazawa’s] diffusion sheet would be antithetical to the teachings of both references” (id. at 35), we agree that the proposed combination of Nakazawa’s structure with the layers of Glaug is sufficiently motivated and reasonably expected to result in a successful article, for the reasons articulated by Petitioner. See, e.g., Pet. 59–65; Ex. 1002 ¶¶ 176–192. Namely, although fluid may flow in both Z directions in Nakazawa (PO Resp. 30), that does not foreclose the combination with Glaug in the manner proposed by Petitioner. See generally Ex. 1002 ¶¶ 176–192; see id. ¶ 184 (detailing the mechanics of the proposed combinations), ¶¶ 188–191 (discussing motivation to combine), ¶ 192 (discussing reasonable expectation of success). The combination can be achieved “either by adding the lower acquisition layer 64 [of Glaug] to diffusion sheet 63 [of Nakazawa], or by replacing diffusion sheet 63 [of Nakazawa] with the two-layer fluid acquisition system 34 [of Glaug],” and as persuasively explained by Dr. Pourdeyhimi, the arrangement constitutes a “fluid flow control structure.” See Ex. 1021 ¶¶ 45–47. Additionally, the diffusion sheet in Nakazawa can be made from the same material as used in Glaug, namely, AquiDry™. Id. ¶¶ 53–55; see also Tr. 17:25–18:3 (“although Glaug does not specify the name AquiDry in its disclosure, Patent Owner’s expert testified that it’s his understanding that Glaug is discussing the AquiDry material, the same material that is in Nakazawa . . . . they disclose using the same material, and Nakazawa says this material work[s]”). When asked if Patent Owner’s expert had any concerns that AquiDry was not the same as between Nakazawa and Glaug, Patent Owner’s counsel replied “They are the same, Your Honor. And we embrace that.” Tr. 46:8–12; see also id. at 58:19 (Petitioner’s counsel commenting about Patent Owner’s counsel: “they agree, AquiDry is used in both Nakazawa and Glaug”). Thus, Patent Owner’s argument that Nakazawa’s diffusion sheet and Glaug’s fluid acquisition layer have different purposes because Nakazawa’s diffusion sheet allegedly must promote fluid flow in the Z-directions, both toward and away from the body (PO Resp. 29–37; Ex. 2004 ¶¶ 26–28, 30– 35)) is not clearly supported by Nakazawa, and is also contravened by the shared disclosure of Nakazawa and Glaug as to the composition of the disputed layer. We have reviewed the complete record, including Patent Owner’s and Mr. Sheldon’s assertions that Nakazawa requires promoting fluid flow in both Z-directions (see id.), but find that Petitioner carries its burden to demonstrate that one of ordinary skill in the art would have been motivated to combine Nakazawa and Glaug with a reasonable expectation of success. On this complete record, Petitioner explains sufficiently why and how a person of ordinary skill would modify Nakazawa’s diffusion sheet, i.e., to use Glaug’s fluid acquisition system, or the lower non-perforated layer of its fluid acquisition system, in Nakazawa, and Petitioner provides well-supported reasons for doing so.” slip op. at 36
Patent outcomesUS 9,308,138 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,308,138 - R.J. Reynolds Vapor Company v. Healthier Choices Management Corp.All claims unpatentablePTAB · Mar 9, 2026 · IPR2024-01458 · APJ Kristina M Kalan · IPR · Final written decision
Claims 1, 7, 8, and 11 are unpatentable as obvious over Lee-based combinations; the Gilbert-based grounds did not establish unpatentability.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Pet. 15 (citing Ex. 1003 ¶ 18). Petitioner further argues a “POSA would have been familiar with electrically powered cigarettes and their components and underlying technologies or similar components and technologies.” Id. “For the purposes of this Response,” Patent Owner “does not dispute Petitioner’s proposed level of skill in the art.” Resp. 17. On this complete record, we adopt Petitioner’s unopposed definition because it appears consistent with the’788 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Patent Owner states that “Petitioner and [Petitioner’s declarant] Mr. Kodama interpret the meaning of the claims based on [Patent Owner’s] construction of the claims by its allegations of infringement in the ongoing litigation.” Resp. 18. Patent Owner further states that for “the purposes of this response,” it “agrees on how the claims are to be construed.” Id. Upon review of the record, we determine that no claim terms require express construction. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Expert testimonyPetitioner expert creditedDecided for petitioner
“the combination of proposed references would operate. As shown in Petitioner’s proposed modification, the Gilbert bulb would have been modified to fit the Lee device. Pet. 57 (annotated Figure); Ex. 1003 ¶ 123 (stating that the combination would work “by merely replacing [Lee’s] heating element (133) with this bulb heater inside of the vaporization unit (14)” and the “bulb heater could be connected to [Lee’s] electric circuit board (111) and battery assembly (11) in a very similar fashion to the nichrome wire heater represented in Lee”); Reply 29–30 (explaining Petitioner’s annotated figure wherein “the fiber rod is not encapsulated inside the bulb”); Ex. 1026 ¶¶ 29–30 (clarifying how the fiber in Petitioner’s proposed combination from its annotated Figure in the Petition extends to, and makes contact with, the outside of the bulb, putting the fluid into direct contact with the bulb; explaining various simple ways a POSA would understand to accomplish this). We credit Petitioner’s proposal and Mr. Kodama’s testimony in this regard. Therefore, we agree that Lee would not have to be “significantly modified or reimagined” as alleged by Patent Owner, nor would the inclusion of a bulb in the Lee device “render Lee inoperable” in view of the modifications to the Gilbert bulb included in Lee, as proposed by Petitioner. Resp. 30–31.” slip op. at 25
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“art would not have combined Lee and Gilbert or Levin, particularly with respect to element [1d], we are persuaded by Petitioner’s arguments that one of ordinary skill in the art would have been motivated to make the combination with a reasonable expectation of success. Petitioner states that the motivation to make the combination would have come from issues “with e-cigarettes at the time, such as metallic taste issues or inhalation risks associated with the use of a metal wire heating element,” and would have explored “heat conducting materials that could vaporize the nicotine liquid without making direct contact with the heating wire.” Pet. 57 (citing Ex. 1003 ¶ 117 (discussing the metallic flavor “dry hit” problem)); see also Reply 18–19. Additionally, Petitioner argues that one of ordinary skill in the art would have implemented “a heating element within a glass bulb to increase the life of the heating element and prevent failure of a device.” Id. at 57–58 (citing Ex. 1009 ¶ 4; Ex. 1003 ¶ 119), 59 (a “POSA would have been motivated to implement a heating element within a glass bulb like that described in Levin for all of the reasons described above” in connection with Gilbert). Petitioner depicts one example of how its proposed combination would incorporate the Gilbert bulb into the Lee device. Pet. 57 (citing Ex. 1003 ¶ 118)). Petitioner additionally relies on Levin’s disclosure that using a bulb will “allow for a consistent and reliable heat source” and “achieve a desired operating temperature when compared to conventional devices.” Id. at 59 (citing Ex. 1009 ¶¶ 56, 49). Mr. Kodama also notes the age and ubiquity of bulb heaters, credibly testifying that “a POSA would have been motivated to implement a bulb heater in the Lee device, and, due at least to the ubiquitous nature of such heaters, the implementation of such a heater would have been well within the knowledge and skill of a POSA.” Pet. 59; Reply 20; Ex. 1003 ¶¶ 39–48, 123. Petitioner also provides sufficient explanation as to “how” and “why” the combination of proposed references would operate. As shown in Petitioner’s proposed modification, the Gilbert bulb would have been modified to fit the Lee device. Pet. 57 (annotated Figure); Ex. 1003 ¶ 123 (stating that the combination would work “by merely replacing [Lee’s] heating element (133) with this bulb heater inside of the vaporization unit (14)” and the “bulb heater could be connected to [Lee’s] electric circuit board (111) and battery assembly (11) in a very similar fashion to the nichrome wire heater represented in Lee”); Reply 29–30 (explaining Petitioner’s annotated figure wherein “the fiber rod is not encapsulated inside the bulb”); Ex. 1026 ¶¶ 29–30 (clarifying how the fiber in Petitioner’s proposed combination from its annotated Figure in the Petition extends to, and makes contact with, the outside of the bulb, putting the fluid into direct contact with the bulb; explaining various simple ways a POSA would understand to accomplish this). We credit Petitioner’s proposal and Mr. Kodama’s testimony in this regard. Therefore, we agree that Lee would not have to be “significantly modified or reimagined” as alleged by Patent Owner, nor would the inclusion of a bulb in the Lee device “render Lee inoperable” in view of the modifications to the Gilbert bulb included in Lee, as proposed by Petitioner. Resp. 30–31.” slip op. at 24
Patent outcomesUS 9,538,788 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,538,788 - Hanwha Solutions Corporation v. Maxeon Solar Pte. Ltd.No claims unpatentablePTAB · Feb 24, 2026 · IPR2024-01198 · APJ Jo-Anne M Kokoski · IPR · Final written decision
Claims 10–20 were not shown unpatentable because Petitioner did not establish the claimed metal impurities or a reason to combine Istratov’s gettering process with the cited solar-cell references.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“These disclosures, taken together, indicate that “metal impurities” are undesirable, and, accordingly, the term “metal impurities” is not meant to include intentionally added dopants. The undesirability of “metal impurities” is also demonstrated by the Specification’s instruction that “contaminants and/or impurities” are used interchangeably throughout. Ex. 1001, 5:8–9. In that regard, “iron, nickel, and/or chromium, among others” are the only exemplary metal impurities and/or metal contaminants identified in the Specification. Id. at 4:65–5:1 (“In an embodiment, the silicon substrate 202 can have contaminants and/or impurities 220, for example metal contaminants and/or metal impurities, such as iron, nickel and/or chromium, among others); 5:35–39 (“In an embodiment, the heating can include gettering contaminants, e.g., metal impurities and/or metal contaminants, from the substrate to the emitter region. In an example, the metal impurities and/or metal contaminants can be iron, nickel, and/or contaminants 520, e.g. metal impurities and/or contaminants, can be located in the second emitter region 512 . . . the metal impurities 520 can be iron, nickel and/or chromium, among others.”). And metal impurities and metal contaminants are both described as gettering from the silicon substrate to the emitter region. See id. at 5:5–9 (“A gettering process can be used to trap the metal impurities 220 in the emitter regions 212, reducing recombination within the silicon substrate 202 and improving overall cell lifetime.”); 5:35– 40 (“In an embodiment, the heating can include gettering contaminants, e.g. metal impurities and/or metal contaminant[s], from the substrate to the emitter region. In an example, the metal impurities and/or metal contaminants can be iron, nickel and/or chromium among others.”); 6:5–8 (“In an embodiment, the heating can getter 232 contaminants 220 from, or nearby, the surface 204 of the silicon substrate 202 and/or from within the silicon substrate 202 to the emitter region 212.”) Accordingly, the Specification conveys that “metal impurities” are metal contaminants that are detrimental to the electrical conduction of solar cells.” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“Petitioner fails to sufficiently demonstrate by a preponderance of the evidence that a POSITA would have been motivated to look to Istratov’s gettering process to improve Choi’s solar cell. Although Petitioner argues that a POSITA would have been motivated to look to Istratov’s gettering process upon identifying detrimental levels of metal impurities in Choi’s substrate, neither Petitioner nor Dr. Holman levels of metal impurities in Choi’s substrate, what level of metal impurities would be “detrimental,” or what detriment the metal impurities would cause. In that regard, Petitioner does not direct us to, nor do we discern, any teachings in Choi regarding the presence of metal impurities in the silicon substrate, let alone iron and/or copper impurities such as those described in Istratov.” slip op. at 24
- ExcludeMotion to exclude, deniedDenied
“We agree with Petitioner. As the Board indicated in Chicago Mercantile Exchange, whether a document qualifies as a printed publication requires a legal determination based upon evidence and “the issue of whether there is sufficient evidence in the record . . . should be presented in the patent owner response—not a motion to exclude.” Chicago Mercantile Exchange, Paper 35 at 52. Although addressing the admissibility of evidence (authenticity or hearsay) underlying the factual determinations of whether Exhibits 1018, 1034, and 1120 may be the subject of a motion to exclude, Patent Owner’s arguments in the Motion address whether there is sufficient evidence to establish that these exhibits are prior art, not the general admissibility of the documents. See Mot. 3–6; Chicago Mercantile Exchange, Paper 35 at 52. be excluded. These exhibits, for the most part, are offered to support Dr. Holman’s testimony regarding the background of the technology (Ex. 1003 ¶¶ 42, 43, 45–52, 56, 57 (citing Ex. 1018), 55, 67 (citing Ex. 1034)) or what the ordinarily skilled artisan would have understood (Pet. Reply 11 (citing Ex. 1120); Ex. 1089 ¶¶ 46–48, 56, 59, 60, 69 (citing Ex. 1120)). Furthermore, Exhibit 1018 was authored by Dr. Holman, and is identified in the curriculum vitae appended to Dr. Holman’s declaration in support of the Petition. Ex. 1003, 224 (App’x. A). Accordingly, we deny Patent Owner’s motion to exclude” slip op. at 32
Patent outcomesUS 11,251,315 not shown unpatentableClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 11,251,315 - Hanwha Solutions Corporation v. Maxeon Solar Pte. Ltd.Some claims unpatentablePTAB · Feb 24, 2026 · IPR2024-01203 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1–11 are unpatentable as obvious; claim 12 was not shown unpatentable because the evidence did not establish that Froitzheim’s silver contact was formed over silicon dioxide.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have had (i) an advanced degree in electrical engineering, mechanical engineering, applied physics, chemistry, materials science, or a related discipline and (ii) at least one year of experience 7 Neither Petitioner nor Patent Owner raises issues of objective indicia of nonobviousness. designing, developing, or researching the design and/or manufacture of solar cells or related technologies. Alternatively, a POSITA [i.e., a person of ordinary skill in the art] would have had (i) a bachelor’s degree in the aforementioned disciplines and (ii) at least two years of experience designing, developing, or researching the design and/or manufacture of solar cells or related technologies. Less work experience may be compensated by a higher level of education, and vice versa.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“C. Claim Construction We construe claim terms according to the standard set forth in Phillips v. AWH Corp., 415 F.3d 1303, 1312–17 (Fed. Cir. 2005) (en banc); 37 C.F.R. § 42.100(b). Under Phillips, we give claim terms “their ordinary and customary meaning.” Phillips, 415 F.3d at 1312. “[T]he ordinary and customary meaning of a claim term is the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Id. at 1313. “Importantly, the person of ordinary skill in the art is deemed to read the claim term not only in the context of the particular claim in which the disputed term appears, but in the context of the entire patent, including the specification.” Id.” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“We are persuaded that Petitioner has shown a reasonable expectation of success in the combination of Froitzheim and Gan. Petitioner explains that the combination of Froitzheim and Gan simply replaces one emitter, i.e., Froitzheim’s diffused emitter, with the polysilicon emitter of Gan. Pet. 36. According to Petitioner, a person of ordinary skill in the art would have also readily understood how to replace a diffused emitter with a polysilicon emitter and oxide layer [and] would have understood that instead of diffusing boron into the substrate’s back side as taught by Froitzheim, a [person of ordinary skill in the art] would instead follow the manufacturing technique taught by Gan. Pet. 37 (citing Ex. 1005, 246). Petitioner explains that the Gan processes are well-known and routine, and Dr. Holman states that “modifying Froitzheim in view of Gan simply involves using Gan’s known technique of a polysilicon emitter and oxide layer with Froitzheim’s known solar cell to improve Froitzheim’s solar cell in a similar way.” Pet. 37 (citing Ex. 1003 ¶ 144). For example, Petitioner directs our attention to “multiple instances” in which oxide layers and polysilicon emitters have been implemented successfully in the art. Pet. 37 (citing Ex. 1005, 246; Ex. 1006 ¶ 22; Ex. 1046, Abstr., 1121; Ex. 1003 ¶ 145). Furthermore, Gan’s statement that “cell performance can be improved if the diffused-emitter is replaced with the polysilicon emitter” and “polysilicon emitters with low J0 and ρc can be obtained with a very small fraction of interfacial oxide breakup” indicate a reasonable expectation of success. Ex. 1005, 245, 249. Gan also states that “polysilicon emitters with these qualities can be quite useful for silicon concentrator solar cells.” Ex. 1005, 249. Thus, we are persuaded that Petitioner has demonstrated that a person of ordinary skill in the art would have had a reasonable expectation of success in combining Froitzheim and Gan.” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“We are not persuaded the record evidence rises to the level of a teaching away. “A reference may be said to teach away when a person of ordinary skill, upon reading the reference, would be discouraged from following the path set out in the reference, or would be led in a direction divergent from the path that was taken by the applicant.” In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994). And “teaching away” requires more than the mere expression of a general preference.” Galderma Labs., L.P., v. Tolmar, Inc., 737 F.3d 731, 738 (Fed. Cir. 2013). Notably, our reviewing court has determined that a reference can distinguish prior art in order to show the novelty of an invention without teaching away from combining the prior art with the invention disclosed in the reference. See Ricoh Co. v. Quanta Computer Inc., 550 F.3d 1325, 1332 (Fed. Cir. 2008). Here, Li prefers a “heterogeneous PN junction” and states that “a PN junction is prepared by a low-temperature deposition method, which avoids a conventional diffusion process at 800–1000°C. Such high-temperature process will cause more defects or contamination in silicon material, which will affect the improvement of cell efficiency.” Ex. 1008, 4. But, Li’s preference for lower temperature diffusion processes does not amount to a teaching away from the broader disclosure. In fact, Li acknowledges that “[t]he silicon thin film can be prepared by any deposition method,” including conventional processes at higher temperatures. Ex. 1008, 4 (emphasis added). And, while Patent Owner asserts that “[d]eposition methods are not relevant to the parties’ dispute, which is over deposition temperature” (Sur-reply 17), the deposition method employed includes its deposition temperature. See Ex. 1008, 4 (Li describing “conventional” diffusion processes at temperatures of 800–1000° C). Thus, just because Li teaches one way of depositing its silicon thin film using a low-temperature deposition method does not mean that Li teaches away from high-temperature processes. Li’s teachings do not discredit or discourage high-temperature processes in a manner that may be said to teach away.” slip op. at 51
Patent outcomesUS 8,222,516 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,222,516
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.