- Fluidmaster, Inc. v. Danco, Inc.All claims unpatentablePTAB · Mar 11, 2026 · IPR2024-00635 · APJ Meredith C Petravick · IPR · Final written decision
The majority held claims 1–14 unpatentable under §103 over Guoxin, Ho, and the Quick Connection Art; one judge dissented as to claims 8, 9, 12, and 13.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“A person of ordinary skill in the art (“POSITA”) with respect to the subject matter of the ’698 patent at the time of the priority date, March 11, 2004, would have had an undergraduate degree in mechanical engineering, or other technical training in product design or equivalent work experience. This person would also possess at least one year of experience in developing and/or evaluating mechanical aspects of fluid systems. I consider myself a person of ordinary skill in the art under this definition. Ex. 1004 ¶ 28. Patent Owner argues: A POSITA in the field to which the ’698 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or research experience in the design or development of toilet products, parts, and accessories. PO Resp. 6. We adopt Patent Owner’s proposed definition of a POSITA, as it is consistent with the ’698 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). However, we see no material difference between the level of skill proposed by Patent Owner and that proposed by Petitioner and Dr. Cameron such that our determinations would be the same under either proposed level of skill.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningDecided for petitioner
“Patent Owner asserts that, because each of the Flow Limitations relate to water flow through the bowl fill valve, these limitations require adjusting the flow rate of water exiting the flow valve. PO Resp. 15–17 (citing Ex. 2013 ¶ 97); See also PO Sur-Reply 7. Petitioner responds that “the claim language of the ’698 Patent discusses adjusting the water flow, not specifically the ‘flow rate.’” Pet. Reply 13. We are not persuaded by Patent Owner, and the conclusory testimony of Mr. Jobin (Ex. 2013 ¶ 97), that because the Flow Limitations “relate” to water flow through the bowl fill valve, that this necessarily means that the flow rate must be adjusted. As Petitioner points out, neither the term “flowrate” nor any similar term appears in any of the Flow Limitations. Thus, the plain language of the Flow Limitations requires that, contrary to Patent Owner’s position, the claim limitation should not be restricted to adjustments to “flow rate.”” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Petitioner argues that Limitations 8B and 12B are directed to the configuration or structure of the bowl fill valve outlet port. Pet. Reply 2–4. According to Petitioner, because Limitations 8B and 12B do recite an overflow tube, the overflow tube is not separately claimed and is recited solely to define the function of the outlet port on the bowl fill valve. Id. at 3. Petitioner, thus, argues that an overflow tube is not separately claimed as a structural element, and that, to meet Limitations 8B and 12B, it is sufficient to show that the prior art discloses a bowl fill valve with an outlet port that is configured to attach directly to a tube that provides water from the outlet port to an overflow tube. Id. at 4. In contrast, Patent Owner argues that Limitations 8B and 12B separately claim the overflow tube, and that Petitioner must show that the prior art discloses a tube that transfers water from the bowl fill valve outlet port to the toilet tank overflow tube. PO Resp. 10–11; PO Sur-reply 2–3. We disagree with Patent Owner, because claims 8 and 12, on their face, require “bowl fill valve outlet port,” but do not require or recite an “overflow tube” as an element of the claimed “bowl fill valve.” When a structure is claimed as “configured to” perform a particular function, it generally requires a structure that is designed to perform the particular function claimed, i.e., it requires more than the mere capability of performing that function. See Aspex Eyewear, Inc. v. Marchon Eyewear, Inc., 672 F.3d 1335, 1349 (Fed. Cir. 2012) (claim language including the phrase “adapted to” is to be construed consistent with “configured to” language and requires that the structure must be “designed or configured to accomplish the specified objective, not simply that [it] can be made to serve that purpose.”); see also In re Giannelli, 739 F.3d 1375, 1379 (Fed. Cir. 2014). The plain language of Limitations 8B and 12B is clearly directed to the configuration of the bowl fill valve outlet port, in that these limitations recite “a bowl fill valve outlet port configured to.”8 The recited function is “attach directly to a tube that provides water from the bowl fill valve outlet port to an overflow tube.” The overflow tube is recited as part of the function in a clause identifying the tube to which the bowl fill valve outlet port is configured to attached — “that provides water from the bowl fill valve outlet port to an overflow tube.” The overflow tube, thus, is recited as part of the function defining the required structure of the bowl fill outlet port and is not separately claimed.” slip op. at 16
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“1. Petitioner’s Contentions Petitioner contends that the combination of Guoxin, Ho, and the Quick Connection Art teaches all of the limitations of claims 1–14 and provides a mapping showing where each claim limitation is found in the prior art. Pet. 21–59. We have reviewed the Petition’s mapping and determine that the Petition sufficiently shows that each limitation of claims 1–14 is disclosed by the combination of Guoxin, Ho, and the Quick Connection Art. Further, we have reviewed Petitioner’s rationale for combining the prior art and determine that the Petition sufficiently shows that it would have been obvious to a POSITA to combine Guoxin, Ho, and the Quick Connection Art.” slip op. at 23
Patent outcomesUS 10,934,698 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,934,698 - Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentablePTAB · Mar 5, 2026 · IPR2024-00634 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1, 3, 8–13, 15, 16, and 19–24 are unpatentable over Brown and Ho, with claims 16 and 19 also relying on the Quick Connection Art; the remaining challenged claims were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Patent Owner proposes that: A [person of ordinary skill in the art (“POSITA”)] in the field to which the ’105 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“of “integrally molded with” as “molded together as a single structure.” Paper 21, 15.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Patent Owner responds that: a POSITA would not have been motivated to make the proposed modification, nor does the Petition include any analysis regarding why a POSITA would be motivated to move from a vertical extended portion to a radial extended portion. Indeed, a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar as it introduces another sudden directional change into the fluid flow system. PO Resp. 58–59 (citing Ex. 2013 ¶ 242).” slip op. at 32
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner
“Patent Owner argues that the ’105 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 63–65; PO Sur-reply 26–29. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 of the bowl fill valve 109, the flow of water through the bowl fill valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288. Further, the ’606 Application states: The bowl fill valve 109 may be, for example, a ball valve, a gate valve, a globe valve, a plug valve, a diaphragm valve, a butterfly valve, a needle valve, a sliding gate, a quick turn valve, a knife valve or any other appropriate type of valve as can be appreciated by those with ordinary skill in the art.” slip op. at 42
Patent outcomesUS 9,103,105 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 9,103,105 - Shenzhen Root Technology Co., Ltd. v. Willow Blossom Holdco LimitedAll claims unpatentablePTAB · Feb 18, 2026 · IPR2024-01296 · APJ Barry L Grossman · IPR · Final written decision
Claims 1–46 are unpatentable as obvious under § 103 over the asserted combinations of Chang, Fang, Yuen, Khalil, Park, and Chen.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that before the effective filing date of the claimed invention a person of ordinary skill in the art (“POSITA”) “would have had at least a bachelor’s degree in mechanical engineering or a similar field and at least two years of experience designing human breast pump equipment” and that “[m]ore education could substitute for experience and vice versa.” Pet. 2 (citing Ex. 1003 ¶¶ 15–18). Mr. Bauer’s cited testimony supports Petitioner’s assertion.” slip op. at 16
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“[parent application to the application that matured into the ’380 patent], the Examiner construed the term ‘self-contained, in-bra wearable device’ to mean ‘complete, or having all that is needed, in itself’ and is capable of being worn in a bra.” Pet. 3 (citing Ex. 1005, 2290) (emphasis omitted). According to Petitioner, “PO did not dispute this construction, and Petitioner applies it herein.” Id. Petitioner also states that “[o]ther terms of the Challenged Claims should receive their plain and ordinary meaning, and no formal claim constructions are necessary in this proceeding because ‘claim terms need only be construed to the extent necessary to resolve the controversy.’” Id. (citing Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011); Ex. 1003 ¶¶ 69–70). Again, because Patent Owner did not file a Response, we exercise our discretion and look to Patent Owner’s Preliminary Response. We note that in the Preliminary Response Patent Owner states that “[f]or purposes of this Preliminary Response, no claim terms require construction to resolve the prior art grounds raised in the Petition.” Prelim. Resp. 19. According to specific construction, any such terms should be accorded their plain and ordinary meaning in light of the specification.” Id. Construction is needed only for those terms “that are in controversy, and only to the extent necessary to resolve the controversy.” See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). There are no claim terms in controversy. Accordingly, we need not construe any terms for our analysis.” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“Petitioner contends (Pet. 17) that a person of ordinary skill in the art “would have been motivated to implement Chang’s breast pump device as suggested by Fang” to achieve four benefits: (1) “to facilitate convenient cleaning and maintenance” (Pet. 19 (citing Ex, 1003 ¶ 102)); (2) “to facilitate more rapid assembly and disassembly (e.g., during use)” (id. at 20–21 (citing Ex. 1003 ¶ 105)); (3) “as a particularly effective and suitable option to generate negative” slip op. at 34
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“a breast pump device having “a diaphragm pump that generates negative air pressure.” Pet. 33; see also id. at 38. Petitioner explains Chang’s pump “generates suction by cyclical compression and decompression of a conduit or flex-tube, and expressly notes that other configurations were known and suitable.” Id. at 17 (citing Ex. 1007 ¶¶ 22, 25, 28, 68, 79, 84–86). Chang, however, does not mention, specifically, that Chang’s pump is a “diaphragm” pump. We note, however, that this claim clause does not state or require any specific type of pump. It merely requires a “pump.” Clause 1[e]/29[e], discussed below, however, does require a “diaphragm” pump. Petitioner here merely lays the foundation for this later clause by asserting that “Fang provides a straightforward suggestion of a diaphragm pump including a diaphragm housing component formed in a wall of the pump housing.” Id. at 18 (citing Ex. 1009 ¶¶ 24–25, Fig. 7; Ex. 1003 ¶ 97). Thus, Petitioner asserts, Fang teaches “an ‘air pump’ in pneumatic connection with the diaphragm that serves to generate negative air pressure,” and Chang teaches “the location of pump components (e.g., ‘motor’ [46]).” Pet. 33 (citing Ex. 1007 ¶¶ 72, 80, Fig, 6A; Ex. 1009 ¶¶ 19, 24). Petitioner then asserts that “the ‘air pump’ components of the combined device are positioned within the pump housing,” and the air pump is powered by Chang’s rechargeable battery. Id. (citing Ex. 1007 ¶¶ 72, 80).” slip op. at 34
Patent outcomesUS 11,413,380 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,413,380 - PTAB · Jan 14, 2026 · IPR2025-00632 · APJ Mitchell G Weatherly · IPR · Remand
On remand, the Board reinstituted review of all challenged claims on all grounds after finding Petitioner sufficiently explained its differing claim-construction positions.
RulingsRemand decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Id. The Director neither addressed the merits of Petitioner’s challenges nor found that our prior consideration of those merits was faulty. Accordingly, we understand that we need not reconsider our conclusion that Petitioner had demonstrated a reasonable likelihood of proving that claims 1, 2, 7–9, 11, 12, and 20–24 were unpatentable or that the merits of patentability set forth in the Petition warranted institution of inter partes review.” slip op. at 5
- BurdenDecided for petitioner
“The question before us, therefore, is whether the Petitioner’s proffered explanation that it has proposed a different claim interpretation before the Board because the District Court may decline to adopt the narrower claim interpretations it advocates there is sufficient. We find that Petitioner’s explanation is sufficient because it follows the Director’s exemplary logic. Whether a district court has already or might in the future decline to adopt constructions that a petitioner proposes in related district court litigation merely reflects the timing of when a dispute over claim interpretation will be resolved. The Director and Patent Owner both recognize that, to resolve the dispute over claim interpretation that exists here, a decision-maker must determine “a single claim construction that best captures the true meaning of the patent claim.” Remand 4; PO Remand Br. 3. Based on the record presented by the parties to date in this proceeding, no dispute exists that the disputed claim terms mean what Patent Owner says they mean in the Litigation. Accordingly, we find that, at this stage of the proceeding, it is undisputed that Patent Owner’s interpretations of the claim terms represent the “single claim construction that best captures the true meaning of the patent claim.”8 Under that claim interpretation, we” slip op. at 8
NonePatents in suitUS 11,835,421 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.No claims unpatentablePTAB · Dec 10, 2025 · IPR2024-01186 · APJ Brian D Range · IPR · Final written decision
Claims 1–20 were not shown unpatentable because Kwatra does not teach or suggest minimizing rotational velocity and acceleration as required by the claims.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) would have the following characteristics: “a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing or digital cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–37). Petitioner states that, “[a]lternatively, a POSITA would have four years of experience working on image or video processing 6 Patent Owner asserts objective evidence of nonobviousness. Prelim. Resp. 19–27. or digital cameras.” Id. Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute the level of ordinary skill in the art. Prelim Resp. 14–15. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’894 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Petitioner “does not believe any terms require a formal construction.” Pet. 6. Patent Owner agrees “no claim terms presently require construction to resolve any current dispute between the parties.” PO Resp. 15. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Kwatra teaches, at Equation 7, minimizing velocity and acceleration of a function representing camera path (P). FF ¶¶ 6, 8–9. Kwatra does not state that this camera path function considers rotation. Rather, the words “camera path” suggest x, y, z movement of the camera rather than rotation of the camera. Dr. Foroosh’s testimony that Kwatra’s minimization of a smoothed camera path does not result in minimizing rotational velocity and acceleration is credible because this testimony is consistent with Kwatra as a whole and consistent with the other evidence of record. Id. ¶ 10. Kwatra recognizes that image rotation angle (“θ”) may not remain smooth. Id. ¶ 12. But rather than attempting to minimize velocity and acceleration of rotation of the camera housing, Kwatra states that applying a smoothness constraint on rotation angle “may be non-linear.” Id. ¶ 13. Consistent with Kwatra, Dr. Foroosh credibly explains the difficulty of applying linear techniques to rotation. Id. Thus, Kwatra proposes instead constraining the sine and cosine of theta. Id. ¶ 14. The Kwatra provisional application is part of the Kwatra reference (id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“(id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28
Patent outcomesUS 10,574,894 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,574,894 - Valve Corporation v. Ironburg Inventions Ltd.All claims unpatentablePTAB · Dec 2, 2025 · IPR2017-00858 · APJ Mitchell G Weatherly · IPR · Remand
On remand, the Board held claims 18, 19, 21, 26, and 29 unpatentable as obvious over Burns and LaCelle; collateral estoppel also rendered those claims unpatentable.
RulingsRemand decision- Skill levelSkill level board ownDecided for petitioner
“understanding of a person of ordinary skill in the art at the time of the invention. Graham, 383 U.S. at 17. Valve contends that the ordinarily skilled artisan would have: a bachelor’s degree in an industrial design or engineering field, and approximately two years of relevant experience, for example. Alternatively, the same or an equivalent level of skill in the art could be obtained by end users or hobbyists who have substantial experience modifying or creating customized game controllers that include features to better suit their needs, even without any college education. Pet. 10 (citing Ex. 1009 ¶ 11). Ironburg, without expressly defining the level of ordinary skill, contends that a college degree of the type identified by Valve is not required. See Supp. PO Resp. 4–6. Ironburg notes that the level of ordinary skill is “relatively low” and the technology involved “is simple and straightforward.” Id. at 4 (citing Ex. 2016 ¶ 21). Ironburg’s contentions regarding the level of ordinary skill are consistent with Valve’s position, id. at 6, which we apply in our analysis. D. Whether Claims 18, 19, 21, 26, and 29 Are “Patentably Distinct” from” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“Ex. 1001, 10:65–11:3. In IPR2016-00948, in which we addressed similar claim limitations in a related patent, U.S. Patent 8,641,525 (Ex. 1038, the “’525 patent”),12 we found that “thickness” as used in claims such as claims 18 and 19 refers to “the dimension of the elongate member perpendicular to 12 Claims 10 and 11 of the ’525 patent contain the limitations directed to the thickness of the elongate member that substantially parallel the limitations introduced in claims 18 and 19 respectively. Compare Ex. 1038, 5:13–16, with Ex. 1001, 10:65–11:3. the surface of the elongate member (i.e., also the direction of displacement when the user activates the control function).” Ex. 1058, 10–11; Ex. 1055, 13; Ex. 1056. We interpret “thickness” the same way in this proceeding.13” slip op. at 16
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“2. Whether the Combined Teachings of Burns and LaCelle Describe All Elements of Claims 18, 19, 21, 26, and 29 Valve argues that it is “undisputed that all elements of base claim 1 are taught by the combination of Burns in view of LaCelle.” Valve Remand Br. 21 (citing Pet. 33–38; Ex. 1009 ¶¶ 23–25, 27–29). Ironburg disagrees, responding that “neither Burns nor LaCelle discloses the first control with an elongate member having a second surface arranged to be non-parallel with the back, outer surface of case.” Ironburg Remand Br. 20. Ironburg’s argument appears to rest on the issue of whether LaCelle describes its underside items as a control. We have already found that LaCelle’s underside items are controls as explained above. However, even if LaCelle did not disclose that its underside items were controls, Valve relies upon Burns as describing this aspect of claim 1. Valve Supp. Reply 9–10. Either way, Valve persuades us that the Burns and LaCelle, when combined as Valve suggests, teach every element of claim 1. In Parts II.D.1–4 above, we have also analyzed the parties’ arguments and supporting evidence on the issues of whether Burns describes the limitations introduced in each of claims 18, 19, 21, 26, and 29. For the reasons expressed above, Valve persuades us that Burns and LaCelle, when combined as Valve suggests, teach every element of dependent claims 18, 19, 21, 26, and 29. We have already concluded that Valve has proven that an ordinarily skilled artisan would have been motivated to combine teachings of Burns and LaCelle to arrive at the invention of claim 1, and those motivations also suffice for dependent claims 18, 19, 21, 26, and 29, all of which introduce limitations that we find to be described by Burns. Accordingly, we find that Valve has proven by a preponderance of evidence that the combined teachings of Burns and LaCelle render claims 18, 19, 21, 26, and 29 unpatentable as obvious.” slip op. at 25
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“On the first issue, we find that LaCelle’s underside items would have been understood by an ordinarily skilled artisan as a “control.” LaCelle describes the article illustrated in all its figures as a “game controller.” Ex. 1005, code (57). Dr. Rempel testifies that even if an ordinarily skilled artisan “were not 100% certain that the identified features on the back of the . . . LaCelle . . . controller[] are functional controls, their location and appearance certainly suggests functional back controls to one of ordinary skill in the art (even if another interpretation were also possible).” Ex. 1019 ¶ 12. The Federal Circuit has instructed us that we erred by failing to consider Dr. Rempel’s testimony supporting Valve’s Supplement Reply. Valve II, at 16. Dr. Rempel’s testimony is consistent with the manner in which LaCelle graphically depicts the items on the underside of its game controller, and we credit that testimony as being persuasive. Additionally, as we explain below, we do not find that Valve must prove that LaCelle describes its underside items as a control to support its position that an ordinarily skilled artisan would have been motivated to apply the curved shape of LaCelle’s underside items to the surface of Burns’s elongate members. On the second issue, we find that LaCelle undisputedly describes its items on the underside of the controller as being curved. On the third issue, the probative value of Valve’s Supplemental Reply argument and supporting evidence, the Federal Circuit held that we ignored important testimony establishing that an ordinarily skilled artisan “‘would have combined LaCelle and Burns’ and ‘would recognize that the predictable result of the combination — a back paddle having an end that is curved like that of LaCelle — could have better coupling with the user’s finger.’” Id., at 17–18 (quoting Ex. 1019 ¶ 39 with added emphasis). The Federal Circuit also refocused our obviousness inquiry on “whether a person of ordinary skill in the art would have been motivated to combine Burns and LaCelle, not whether the combination would with absolute certainty result in the desired outcome.” Id. at 18. Dr. Rempel’s testimony cited by the Federal Circuit establishes that an ordinarily skilled artisan would have been motivated to apply the curved shape of LaCelle’s underside items to Burns’s elongate members. Our original Remand Decision failed to consider that testimony, and the Federal Circuit has identified that failure as error. Valve II, at 17. The argument proffered by Ironburg to rebut Dr. Rempel’s testimony is not supported by evidence. See Ironburg Remand Br. 23–24 (citing our Remand Decision but failing to cite evidence in support of Ironburg’s proffered argument).” slip op. at 24
Patent outcomesUS 9,289,688 unpatentableClaim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 9,289,688 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentablePTAB · Dec 2, 2025 · IPR2024-01052 · APJ Brian D Range · IPR · Final written decision
Claims 1, 2, 7–12, and 17–20 are unpatentable as obvious; claims 3–6 and 13–16 were not shown unpatentable because the asserted Watanabe combinations were unsupported.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–38). Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute and applies Petitioner’s proposed level of skill. PO Resp. 6. We find that Petitioner’s proposal is reasonable and consistent with the ’832 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). Thus, we apply Petitioner’s proposal in our analysis.” slip op. at 13
- Prior constructionPrior construction adoptedDecided for petitioner
“In our Institution Decision, we construed “determin[ing] a viewing window for the visual content as a function of progress through the progress length” as “requiring determining a viewing window for different times of the video.” Inst. Dec. 21. Neither party disputes this construction. PO Resp. 7; Pet. Reply 1–7. We maintain this same construction.” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“Thomason are in the same field of endeavor. Thomason describes a camera and method for correctly orientating pictures from the camera. See, e.g., Ex. 1004 ¶¶ 1, 2 29–40, Figs. 3a–3b. In particular, Thomason is interested in rotating and cropping images to reduce the effect of poor orientation. Pet. 9 (citing Ex. 1004 ¶¶ 2, 34, 36). Pacurariu likewise describes aligning and resizing/cropping of a captured image to correct poor orientation. See, e.g., Ex. 1005 ¶¶ 1, 3, 45–56, Figs. 5A–5C. The preponderance of the evidence also supports that a person having ordinary skill in the art would have had reason to combine the Pacurariu’s teachings with Thomason to predictably improve Thomason. Thomason teaches correct rotation of video data and makes use of rotation sensor to correct rotated images. Pet. 19–21 (citing, e.g., Ex. 1004 ¶¶ 4, 27, 29, 35; Ex. 1002 ¶¶ 76–77). Pacurariu similarly uses sensors and measures tilt angle of the camera. Id at 21–22 (citing, e.g., Ex. 1005 ¶¶ 51–52, Fig. 6; Ex. 1002 ¶ 78). Pacurariu further teaches that its tilt data angle can be stored for each “video frame.” Id. at 22 (citing Ex. 1005 ¶ 52). Petitioner, with support from credible testimony of Dr. Katsaggelos, explains how the teachings of Thomason and Pacurariu could be successfully combined. Id. at 23 (citing, for example, Ex. 1002 ¶ 81). A person of ordinary skill in the art could have known that Thomason’s system could be improved by saving rotation data for each video frame and correcting images on a frame-by-frame basis. Id. at 23–24. The testimony of Dr. Katsaggelos is credible in this regard. Ex. 1002 ¶¶ 80–81. Petitioner and Dr. Katsaggelos explain the references’ teachings and, based on these teachings, assert that a person having skill in the art would have had reason to combine with reasonable expectation of success based on those teachings. Reason to combine may properly come from the references themselves. KSR Int’l Co., 550 U.S. at 418 (explaining reason to combine may come from “interrelated teachings of multiple patents”). Based on the evidence presented, Petitioner establishes by a preponderance of the evidence that a person having ordinary skill in the art would have had reason to combine the teachings of Thomason and Pacurariu with a reasonable expectation of success. Ex. 1002 ¶¶ 76–81, 89–92; Ex. 1004 ¶¶ 4, 8–9, 27, 29, 35; Ex. 1005 ¶¶ 26, 41, 46, 51–52, 55–57, Figs. 6, 7.” slip op. at 27
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for patent owner
“evaluating nexus between the claimed invention and objective evidence of nonobviousness, also referred to as secondary considerations. Lectrosonics, Inc. v. Zaxcom, Inc., IPR2018-01129, Paper 33 at 33 (PTAB Jan. 24, 2020) (precedential). We first consider whether Patent Owner has demonstrated “that its products are coextensive (or nearly coextensive) with the challenged claims,” resulting in a rebuttable presumption of nexus. Id. at 33. If not, that “does not end the inquiry into secondary considerations”; “the patent owner is still afforded an opportunity to prove nexus by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. (quoting Fox Factory, 944 F.3d at 1373–75).” slip op. at 62
Patent outcomesUS 11,336,832 mixedClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,336,832 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentablePTAB · Nov 26, 2025 · IPR2024-00984 · APJ Nabeel U Khan · IPR · Final written decision
Claims 6 and 7 are unpatentable as obvious over Meulen and Chao; claim 1 was not shown unpatentable because Meulen does not disclose transforming an image captured by its camera.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that a person of ordinary skill in the art in the relevant field “would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras,” or alternatively “would have four years of experience working on image or video processing, or digital cameras.” Pet. 6. Petitioner further argues that an “advanced graduate degree” may “make up for the work experience.” Id. (citing Ex. 1002 ¶¶ 33–34). “Patent Owner applies Petitioner’s proposed level of skill.” PO Resp. 4–5 (citing Ex. 2027 ¶¶ 19–20). We adopt Petitioner’s proposed level of ordinary skill because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’413 patent and the cited prior art.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“From the outset we note that the words of the claim recite “non- uniformly shift[ing] the pixels” and do not recite a “non-linear” transformation. This favors Petitioner’s position, which is based directly off the definition of “non-uniform,” over Patent Owner’s position, which substitutes “non-linear” for “non-uniform.” Generally, then, we would determine the ordinary and customary meaning of the claim term in the context of the entire Specification. Here, however, the ʼ413 patent does not mention “uniform” or “non-uniform” shifting of pixels anywhere except in the claims. The Specification, therefore, provides limited guidance, by itself, as to the ordinary and customary meaning of the term. Nonetheless, even reviewing the portions of the Specification cited by the parties, we see no clear or unambiguous effort to limit the challenged claims to require only non-linear transformations in which the pixels to which a transformation is applied do not have the same amount of shift. is not non-linear. Pet. Reply 1. Specifically, Petitioner argues that the center circle of Figure 2B maintains the original circular shape after the transformation is applied to the image which contradicts Patent Owner’s argument that no two pixels will have the same amount of shift. Pet. Reply 1–2. We agree. In Figure 2B of the ʼ413 patent, the center of the image is chosen to be the region of interest. Ex. 1001, 4:19–21. After the input image goes through linear scaling (step 204) and then non-linear warping (step 206) the circles become more vertically compressed as they approach the top and bottom edges and more horizontally stretched as they approach the left and right edges. Id. at 4:22–30. But “the center circle is fully corrected so that it maintains the original circular shape of the corresponding circle in the input image 212.” Id. at 4:23–25. This means that at least some pixels, such as those of the center circle, undergo the same amount of shift after being transformed.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“readable instructions” of claims 1 and 2 must occur in a particular order. Specifically, Patent Owner argues that the step of “determine a portion within the input image” must occur after “obtain[ing] an image” and before “apply[ing] a transformation to the input image.” PO Resp. 17 (citing Ex. 2027 ¶ 59). Petitioner argues, on the other hand, that the specification does not require such an order and, in fact, describes an embodiment where such an order is not followed. Pet. 3. We determine that the “determine a portion within the input image” step does not need to occur after the “obtain an image” step and before the “apply a transformation to the input image” step. As Patent Owner itself points out, claims 1 and 2 are apparatus and system claims respectively, and an ordering of the limitations of such claims is not necessary. PO Resp. 17. Even if we were to treat the apparatus and system claims as reciting the steps of a method, “as a general rule the claim is not limited to performance of the steps in the order recited, unless the claim explicitly or implicitly requires a specific order.” Baldwin Graphic Systems, Inc. v. Siebert, Inc., 512 F.3d 1338, 1345 (Fed. Cir. 2008) (citing Interactive Gift Express, Inc. v. Compuserve Inc., 256 F.3d 1323, 1342–43 (Fed. Cir. 2001)). We see nothing in the claims that would cause us to break this general rule. Patent Owner argues that the claims imply a “specific order because the ‘determine a portion’ requirement operates on ‘the [obtained] input image’ and defines the ‘portion’ that is necessary for the 23; Ex. 2027 ¶ 59). Although the steps are recited in a specific order in the claim, as they necessarily must be, the claim does not expressly specify that the certain steps must occur before or after other instructions, nor does logic imply such a requirement. For example, if certain characteristics of the image are known before the image is obtained (e.g. the size, dimensions, resolution, aspect ratio, or content etc.) the determination of the portion of the image could be made before the image is obtained. These characteristics may be based on the specific device taking the image or the subject matter of the image, both of which may be known before the image is captured or obtained. It is, therefore, not necessary that the image be obtained in order for a portion of the image to be determined. Similarly, we do not find the written description to expressly or implicitly specify an order the claimed step of “determine a portion of the input image.” For example, the written description of the ʼ413 patent states that in Figure 2B “the center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction as the frame boundary is approached.” Ex. 1001, 4:19–22. Patent Owner emphasizes that this disclosure implies that an input image is obtained before the center portion is chosen. PO Resp. 19 (citing Ex. 1001, 3:63–64, 4:19–22). But the description of this embodiment does not expressly recite an order. For example, the description of Figure 2A explains that “an input image is obtained” in step 202, “the image is then scaled” in step 204, and a “non-linear warping is then applied” in step 206. Ex. 1001, 3:63–4:3. This description does not mention “determin[ing] of a portion of the image” as a separate step or as part of the listed steps, and therefore, does not specify an order in which this step must occur. is configured so that some areas of the image are fully corrected geometrically, while some other areas are distorted. . . . [T]he center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction.” Id. at 4:17–19. This excerpt from the ʼ413 patent, which the Patent Owner specifically relies on (PO Resp. 19), also does not specify an order in which the determination step (choosing of the region of interest) takes place. Moreover, because the ʼ413 patent states that the warp module is configured so that some areas are fully corrected while others are not, the determination step could take place at the time the warp module was configured, presumably before the image was obtained. Finally, the ʼ413 patent states that “in the case, of video, the area may dynamically change between images (e.g. to follow a moving object).” Ex. 1001, 4:34–36. Patent Owner argues that this description “requires first obtaining the image in order to locate the object that is being followed.” PO Resp. 19–20. This embodiment is related to the case of video or a moving object, which the challenged claims do not mention. We, therefore, decline to limit the scope of the claim based on this embodiment. Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2005) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“Having reviewed the parties’ arguments and cited evidence we determine Petitioner has established, by a preponderance of the evidence, that a POSITA would have been motivated to combine Meulen and Chao. For example, Petitioner argues that “[i]t would have been obvious that when performing image scaling, pixels from the input to output positions are shifted based on a scaling factor.” Pet. 91. Meulen teaches scaling but does not provide the details regarding scaling. E.g., Ex. 1007, 1:55–56, 4:37–49. We agree that in light of Meulen’s disclosure of scaling, a POSITA would have looked to other references, such as Chao, for further details on how to perform scaling. Dr. Katsaggelos provides credible support, testifying that “Meulen mentions ‘compression and/or scaling,’ and provides details on how to perform compression. But Meulen does not disclose the details of how to perform scaling. A POSITA when faced with Meulen and having the knowledge about scaling would have been motivated to turn to a prior art reference that discloses the details of scaling.” Ex. 1002 ¶ 262. Patent Owner argues that Petitioner provides no motivation to combine other than asserting that it involves combining prior art elements. PO Resp. 35 (quoting Pet. 92). As explained above, however, Petitioner does more than just assert that the motivation involves combining prior art elements. Instead, Petitioner explains that Meulen discusses both compression and scaling, and provides details regarding compression but does not provide details on how to scale. Pet. 91–92; Ex. 1002 ¶¶ 262–262. Thus, Meulen teaches that scaling was a known technique. See Hybritech, (“a patent need not teach, and preferably omits, what is well known in the art”). Dr. Katsaggelos testifies that, in this situation, a POSITA would have looked to Chao for details regarding scaling. Ex. 1002 ¶¶ 262–263. We determine this establishes, by a preponderance of the evidence, that a POSITA would have had reason to combine Meulen’s teachings with Chao. Patent Owner draws a distinction between Meulen and Chao, arguing that “Meulen is concerned with modifying content from a media source to be displayed on a device’s screen while Chao, by contrast, is directed to changing the aspect ratio of a document intended for printing.” Id. at 36 (citing Ex. 2027 ¶¶ 89–90). Patent Owner’s argument is contradicted, however, by Chao’s disclosure which states that “after all the background and foreground elements in the image have been resized . . . [t]he image may be output by displaying the image on or as part of: a display screen such as a computer monitor, camera screen, printer screen, printed page, projected image, or the like.” Ex. 1008 ¶ 32. Patent Owner argues that Meulen’s system avoids distortion near the middle where the user’s focus is more likely to be, while Chao, on the other hand, is directed to avoiding distortion of stylized borders on differently sized pages. PO Resp. 36–37 (citing Ex. 1006, 1:26–29; Ex. 1008 ¶¶ 1, 25; Ex. 2027 ¶¶ 91–92). This argument reads the prior art too narrowly and does not address Petitioner’s combination. Petitioner does not rely on Chao for its teaching of avoiding distortion near the borders of the image, but rather on its teaching of scaling the image while maintaining the design intent of the original image. Ex. 1008 ¶ 22; Ex. 1014 ¶ 67. Thus, Petitioner is applying Chao’s techniques of scaling (regardless of where the area of 92. Finally, Patent Owner argues that Chao’s approach of stretching/shrinking only the background and uniformly scaling entire foreground objects is suitable for graphic design but incompatible with Meulen which is concerned with adapting externally derived media source content for display on a fixed size screen. PO Resp. 37–38 (citing Ex. 2027 ¶ 93). We disagree with Patent Owner’s argument because it does not address Petitioner’s combination. Petitioner relies on Chao’s teaching of stretching/shrinking of background elements and applies that stretching/shrinking to Meulen’s images displayed on its screen. Pet. 91–92 (citing Ex. 1008 ¶¶ 28, 63; Ex. 1002 ¶ 263). The fact that Chao applies its teaching to graphic design does not prevent a POSITA from applying those teachings to Meulen’s media content displayed on its screen.” slip op. at 20
Patent outcomesUS 10,015,413 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,015,413 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentablePTAB · Nov 25, 2025 · IPR2024-01165 · APJ William V Saindon · IPR · Final written decision
Claims 1–21 were not shown unpatentable because Zhou does not teach the claimed low-light high-pass or stickiness parameter limitations.
RulingsFinal written decision- BurdenFwd all claims patentableNot shown unpatentable
“4. Conclusion for the Prior Art Analysis In sum, we find that Zhou does not disclose the low-light high-pass parameter or the stickiness parameter. Petitioner’s grounds for both independent claims 1 and 16 rely on Zhou for teaching a low-light high-pass parameter or a stickiness parameter. Pet. 23–28, 64. Because we find Zhou does not teach these limitations, all of Petitioner’s grounds fall for this reason. III. CONCLUSION For the reasons given above, we determine that Petitioner has not established by a preponderance of the evidence that any claim of the ’840 patent would have been obvious in view of the prior art cited.” slip op. at 18
- Skill levelSkill level petitioner adoptedOther
“A person of ordinary skill in the art (POSITA) in the field of the ’840 patent would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras. Alternatively, a POSITA would have four years of experience working on image or video processing, or digital cameras. An advanced graduate degree in the disciplines cited above may make up for the work experience indicated above. Pet. 6 (citing Ex. 1002 ¶ 32). Patent Owner applies the same standard. PO Resp. 26–27. We use this agreed-upon standard for purposes of this Decision.” slip op. at 7
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“We review this testimony based on the strength of the underlying factual basis. 37 C.F.R. § 42.65(a); Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985) (“Lack of factual support for expert opinion going to factual determinations, however, may render the testimony of little probative value . . ..”). Here, the underlying factual basis is not very strong for either witness. That said, we find that Dr. Foroosh’s testimony is more logically sound and consistent with the ’840 patent disclosure. Based on our reading of the specification, we find a clear indication that “stickiness” has to do with the past. In order to control “the extent by which preceding portion(s) . . . impacts determination of the smoothed trajectory” (emphasis added), one must control the degree by which the past frames impact determination. And to control the degree of the past’s influence, one must, as a consequence, favor the past over the future. That is, the frame of reference of the stickiness parameter is the past. The specification could have used a time-agnostic term, like a “nearness” or “adjacency” parameter, but it did not. Thus, the fact that “stickiness” is used in conjunction with “preceding” indicates that it deals with a preference for preceding frames. On this basis, we find Dr. Katsaggelos’s testimony less persuasive than Dr. Foroosh’s.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“That said, we do not construe a stickiness parameter as prohibiting consideration of future frames. Instead, we determine that the stickiness parameter’s value determines the impact of the preceding portions, versus the following portions. The ’840 patent recognizes this, when it says that a stickiness parameter value of “1,” representing a “lazy” stabilizer that maximally favors the past, would not override a violation of the margin constraint based on the look-ahead (i.e., would not allow the viewing window to fall out of bounds in the event of large future motion). See Ex. 1001, 22:26–30; see also id. at 12:61–13:29 (acknowledging that favoring the past may lead to a conflict with the viewing window determination), 15:39–60 (adjusting the viewing window to ensure it does not violate a margin constraint). Thus, while a past-favoring parameter by necessity favors the past over the future, it does not prohibit consideration of the future. In view of the above, we construe the claimed “stickiness parameter” as a parameter that controls the extent by which preceding portions of the trajectory impacts determination of the smoothed trajectory, with an understanding that in order to favor preceding portions, to some extent, the parameter must relatively disfavor following portions.” slip op. at 10
Patent outcomesUS 10,958,840 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,958,840 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentablePTAB · Nov 25, 2025 · IPR2024-01164 · APJ William V Saindon · IPR · Final written decision
Claims 1–21 were not shown unpatentable because Shi does not disclose the claimed low-light high-pass parameter required by the asserted obviousness grounds.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Given the teachings of the specification, we agree with Patent Owner that a low-light high-pass parameter is a parameter of a smoothing function that favors high frequencies (high pass) when exposure times are long (low light). See Tr. 42:10–18 (Patent Owner’s counsel stating that “high-pass” means “there’s a bias or preference for high frequencies”); Ex. 2020, 93:23– 94:15 (Petitioner’s declarant, Dr. Katsaggelos, agreeing that a high-pass system attenuates the low frequency of a signal). Although we acknowledge Petitioner’s position that the specification provides other ways or considerations in implementing a smoothing function, based on our above analysis of the specification, we find that the specification describes the lowlight high-pass parameter as a specific component of a smoothing function. See, e.g., Ex. 1001, 21:17–25 (setting out several parameters besides the low-light high-pass parameter used in trajectory smoothing).” slip op. at 10
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“position and a real device position. Id. at 18:27–40. In other words, the blur is addressed by analyzing the image to identify motion and then shifting the image. Shi, however, does not disclose how its parameter is based on low light (or the long exposure times indicative of low light). In its Petition, Petitioner asserts that a person of ordinary skill in the art would understand that “blurs can be caused by low light conditions.” Pet. 28 (citing Ex. 1003 ¶ 111). Although this is true, that does not mean that Shi’s blurs are identified by a parameter that considers low light. As we just described, Shi identifies the blur by quantifying the amount of motion of the points in an image, not by identifying low light. This is simply a different way to determine the presence of motion blur. In Shi, blur is measured, whereas in the ’840 patent, it is inferred based on low-light conditions (e.g., by observing the exposure time). See, e.g., Ex. 1007, 18:7– 26; Ex. 1001, 19:12–26. In its Reply, Petitioner does not point to any further disclosures. Accordingly, we find that Shi does not disclose the “low-light” aspect of the claimed low-light high-pass parameter. This is sufficient to determine that Petitioner’s ground does not meet all claim limitations. Similarly, we find that Shi does not disclose the “high-pass” aspect of the parameter. Shi’s blur compensation uses a spherical interpolation to modify the image. Ex. 1007, 18:27–40. The low-light high-pass parameter, as we have construed the term, allows more high frequencies. To allow more high frequencies, this necessarily means either allowing fewer low frequencies, or allowing more high frequences as opposed to some counterfactual situation in which fewer high frequencies were going to be allowed. See Ex. 2020, 94:23–95:15; Ex. 2022. We are directed to no persuasive evidence from Petitioner that Shi’s spherical interpolation favors high frequencies over low frequencies. Accord Ex. 2018 ¶ 107 (Patent Owner’s expert stating that Shi’s spherical interpolation “reintroduce[es] both high- and low-frequency motion”). Even if Shi allows the viewing window to track the camera position “consistent with the natural blur in the image” (Ex. 1007, 17:63–67), we are not provided with sufficient evidence to conclude by a preponderance of the evidence that providing a similar visual goal as a high-pass parameter (Ex. 1001, 22:16–18, “the output motion may include high frequencies that mask motion blur”) is the same as having a high-pass parameter. Again, merely preserving high frequencies is not the same as having a “high-pass parameter” because, as construed, a “high-pass parameter” also involves some degree of attenuation of low frequencies or relative increase of high frequencies. Accordingly, we find that Shi does not disclose the “high-pass” aspect of the claimed low-light high-pass parameter.” slip op. at 18
Patent outcomesUS 10,958,840 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,958,840
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.