• Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.Some claims unpatentable
  PTAB · Jan 22, 2026 · IPR2024-01094 · APJ Grace Karaffa Obermann · IPR · Final written decision

  Claims 1, 2, 6, and 8–14 are unpatentable as obvious over Ma; claims 3 and 4 were not shown unpatentable over Werner.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends: A person of ordinary skill in the art (“POSA”) at the time of the alleged invention of the ’223 patent would have had a university degree in chemistry and additional expertise or a second university degree in the field of electrical engineering, particularly optoelectronics, or alternatively a university degree in electrical engineering and additional expertise or a second university degree in the field of chemistry. The person of ordinary skill in the art has spent several years studying the structure and function of organic optoelectronic components, in particular OLEDs, and has detailed knowledge of the chemical structure of light-emitting organic layers and the transport of charge carriers to these layers. In this respect, the person of ordinary skill in the art works at the interface between electrical engineering/physics (charge carrier transport and light emission processes in optoelectronic components) and chemistry, in particular organic chemistry (materials and layer stack combinations suitable). Pet. 14 (citing Ex. 1003 ¶¶ 46–47). Patent Owner does not dispute Petitioner’s contention. See generally Resp. Neither party indicates that the result would change depending on the definition selected. We adopt Petitioner’s uncontested proposed definition, because it is consistent with the disclosures of the asserted prior art references. See Ex. 1005, (code 57); Ex. 1007, 8107 (abstracts of the references asserted in the patentability challenges).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under that standard, claim terms generally are given their plain and ordinary meaning as would have been understood by the ordinarily skilled artisan at the time of the invention and within the context of the entire patent disclosure. See Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). We construe claim terms only as relevant to the parties’ contentions and only to the extent necessary to resolve the issues in dispute. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999); Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017). Neither party indicates that an express construction for any claim term is necessary to resolve the disputes at hand. Pet. 15; see generally Resp. On this record, we determine that no claim term requires express construction for purposes of this Decision. In our analysis of the challenges, however, we discuss the meaning of the terms “metal complex” and “central metal atom,” which appear in claim 1 (Ex. 1001, 19:19–20) to the extent necessary to resolve Patent Owner’s contention that Petitioner fails to establish that Ma invalidates claim 1. See Resp. 53, 56–58.” slip op. at 9

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Whether Ma qualifies as a “printed publication” involves an inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public. In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004). A reference is considered “publicly accessible” upon a satisfactory showing that the document has been “disseminated or otherwise made available to the extent that persons interested and ordinarily skilled in the subject matter or art exercising reasonable diligence[] can locate it.” Kyocera Wireless Corp. v. ITC, 545 F.3d 1340, 1350 (Fed. Cir. 2008); see Hulu, LLC v. Sound View Innovations, LLC, IPR2018-01039, Paper 29, 10– 11 (PTAB Dec. 20, 2019) (precedential).” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “Based on the information presented, we find Petitioner has the better position. Patent Owner admits that joint vaporization means “two materials vaporize together.” Reply 21 (quoting Resp. 54). As Petitioner argues, “This is what Ma discloses.” Id. We agree with Petitioner that Ma describes a “two-component” electron transport layer having a “thickness with one value.” Id.; see Ex. 1007, 811 (reporting a “co-deposited” application of “BPhen:LiQ” that is “50 nm thick”). Ma’s disclosure, thereby, strongly “indicates that the two components were vaporized together––as opposed to creating a ‘macroscopically homogenous form’” prepared by sequentially vaporizing the individual components as Patent Owner “hypothesizes.” Reply 21 (citing Ex. 1020 ¶¶ 42–44; Ex. 2041 ¶¶ 155–157); see Resp. 54– 55; see also Ex. 1007, 811 (Ma’s description of its device fabrication, appearing in the third paragraph of the experiments section). Petitioner further advances evidence that “[p]reparing a layer that is ‘macroscopically homogeneous’ but potentially microscopically heterogeneous,” as Patent Owner postulates, “would introduce excessive variability and render the data noncomparable and unreliable, thus undermining the experiment’s purpose.” Reply 21 (citing Ex. 1020 ¶ 44); see Resp. 54–55. Patent Owner presents no counterargument or evidence that is persuasive to undercut Petitioner’s reasoning or evidence on that point. See Sur-reply 19–22. Petitioner also argues that an ordinarily skilled artisan would have recognized “that vaporizing materials together would best achieve Ma’s objective of assessing the current density using different Liq doping percentages.” Reply 22 (citing Ex. 1007, 811; Ex. 1020 ¶ 51). Here again, Petitioner’s evidence on point stands uncontested. See Sur-reply 19–22 (declining to contest that point). On this record, therefore, we agree with Petitioner that, as to the relevant disclosure in Ma, “the most natural interpretation of ‘co-deposition’ for forming a layer, particularly when there is nothing to indicate that the materials” are “vaporized sequentially,” is that the materials are co-deposited by joint vaporization. Reply 22 (citing Ex. 1020 ¶ 46–51). We further agree that, “[u]nder a preponderance standard, Ma’s disclosures are sufficient to render joint vaporization at least obvious.” Id. For the above reasons, we determine that Petitioner demonstrates by a preponderance of the evidence that Ma discloses joint vaporization as required by the challenged claims.” slip op. at 15

  Patent outcomesUS 8,558,223 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 8,558,223
• Boe Technology Group Co., Ltd. v. 138 East LCD Advancements LimitedSome claims unpatentable
  PTAB · Dec 1, 2025 · IPR2024-00973 · APJ George R Hoskins · IPR · Final written decision

  Claims 1, 3–7, 9–13, and 15–18 are unpatentable as obvious over Reiner and over Reiner with Takahara; claims 2, 8, and 14 were not shown unpatentable.

  RulingsFinal written decision

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “patentability based solely on arguments considered above in the context of claim 4. See, e.g., PO Resp. 42–43, 47–52. Therefore, Patent Owner has waived any other argument. See Inst. Dec. 44; Paper 10, 10. We adopt Petitioner’s arguments concerning these claims having been obvious over Reiner as our own in this Decision. See Pet. 40–44, 50–56, 57–70, 71; Ex. 1003 ¶¶ 134–142, 154–168, 174–221, 227. Accordingly, we conclude a preponderance of the evidence establishes these claims are unpatentable as having been obvious over Reiner.” slip op. at 83

  • Expert testimonyOther
  • Skill levelOther

  Patent outcomesUS 9,184,157 mixed
  § 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,184,157
• Kohler Co. v. Delta Faucet Co.Some claims unpatentable
  PTAB · Oct 1, 2025 · IPR2024-00700 · APJ Jane E Inglese · IPR · Final written decision

  Claims 1, 2, and 9 are unpatentable as obvious; claims 3–8 and 10–24 were not shown unpatentable because the asserted references failed to establish limitations including the claimed light pipe features.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “For purposes of this Decision, we adopt Petitioner’s definition of a POSITA. Petitioner’s witness (Mr. Cook) qualifies as a POSITA under this definition, and, therefore, is qualified to opine from the perspective of a POSITA on technical matters included within the areas of expertise prescribed by the definition. As indicated above, Petitioner’s definition of a POSITA does not require education in the field of optics and professional experience designing or analyzing optical apparatus, unlike Patent Owner’s definition. We are aware, however, that Patent Owner’s witness (Dr. Klopp) has more extensive experience with optical systems and methods than Petitioner’s witness (Mr. Cook). Compare Ex 1003 ¶¶ 8–14, Ex. 2005, 39:21–59:17, with Ex. 2003 ¶¶ 3–20, Ex. 2004, 1–2, Ex. 1015, 10:22–13:25. Although Mr. Cook possesses excellent credentials in the field of mechanical engineering, his experience in the design and analysis of optical systems and methods is sparse and insubstantial compared to that of Dr. Klopp. Id. Due to this difference in experience levels, in instances where the witnesses express differing views on factual issues related to optical systems and methods, we will accord more weight to Dr. Klopp’s testimony than to Mr. Cook’s.” slip op. at 8

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedMixed

    “through the light transmission portion and bottom output face 313 of light conductor 38, which teaches transmitting light in parallel with the longitudinal axis of the housing. Tseng does not disclose or teach that light is emitted through the side surface of annular protrusion 383 in a direction perpendicular to the longitudinal axis of the housing. Ex. 1004 ¶ 97. Petitioner’s assertions that this would be the case consist solely of conclusory statements, supported only by citations to Mr. Cook’s declaration. Mr. Cook, however, simply repeats Petitioner’s conclusory statements, without providing sound technical reasoning supported by objective evidence to explain and support his opinions. Ex. 2003 ¶¶ 101– 102, 105, 195–198, 202. We, therefore, accord little weight to Mr. Cook’s opinion on this particular matter because it “merely repeats, verbatim, the conclusory assertion for which it is offered to support,” and “does not cite to any additional supporting evidence or provide any technical reasoning [in] support.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). Furthermore, Mr. Cook’s opinion conflicts with that of Patent Owner’s witness, Dr. Klopp, who opines that a “POSITA would understand from Tseng’s third embodiment that light from the LED would bypass the annular protrusion 383 of outer cliff 381, while transmitting downwardly toward the output face 313.” Compare Ex. 1003 ¶¶ 174–175, 190–194, with Ex. 2003 ¶¶ 101–102, 105. As discussed above, Mr. Cook is qualified to opine from the perspective of a POSITA on technical matters included within the expertise of a person meeting Petitioner’s definition of a POSITA, which do not include optics and optical apparatus. We, therefore, credit Dr. Klopp’s opinion over that of Mr. Cook on this particular factual issue of how it is directly related to optical systems and methods about which Mr. Cook possesses limited relevant experience. See Ex. 1003 ¶¶ 6–15 (experience in communication systems and electronics); Ex. 2005, 55:16–58:19 (design experience with electronics that use indicator lights or fiber-optic communications; no professional experience with light pipes, diffusers, or plumbing fixtures). Dr. Klopp possesses substantial research and professional experience with optical methods, fiber optic light pipes, light guides, diffusers, prisms, and analysis of faucets, spray heads, and plumbing fixtures. See Ex. 2003 ¶¶ 6–10 Supra 8 (discussing weight accorded to conflicting witness testimony); see also Resp. 2–3 (arguing that “Petitioner’s expert, Mr. Cook, is a mechanical engineer with substantial professional experience in electronics for high-voltage power systems and communications, but he has limited experience with the claimed subject matter.”).” slip op. at 34

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed

    “would be used to construe the claim[s] in a civil action [held] under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). Under that standard, claim terms generally are given their plain and ordinary meaning as would have been understood by the ordinarily skilled artisan at the time of the invention when read in the context of the specification and prosecution history. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). We construe terms in controversy only to the extent necessary to resolve the controversy. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner asserts that the claim terms do not require construction and should be afforded their plain and ordinary meaning. Pet. 13. Patent Owner contends that it applies the plain and ordinary meaning of the claim terms. Resp. 7. Taking into consideration the information presented, we determine that none of the claim terms requires express construction for purposes of resolving the dispute before us.” slip op. at 9

  • BurdenMixed

    “perpendicular to the longitudinal axis of Tseng’s housing (internal 33 and external 34 sleeves). “In an inter partes review, the burden of persuasion is on the petitioner to prove ‘unpatentability by a preponderance of the evidence,’ 35 U.S.C. § 316(e), and that burden never shifts to the patentee.” In re Magnum Oil Tools Int’l Ltd., 829 F.3d 1364, 1375 (Fed. Cir. 2016) (quoting Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015)); see also Aqua Products, Inc. v. Matal, 872 F.3d 1290, 1306 (Fed. Cir. 2017 (en banc (quoting Magnum Oil)).” slip op. at 40

  Patent outcomesUS 10,393,363 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,393,363
• Inergy Technology, Inc. v. Force Mos Technology Co., Ltd.Some claims unpatentable
  PTAB · May 16, 2025 · IPR2024-00094 · APJ Mary C Hoffman · IPR · Final written decision

  Claims 1 and 3–5 are unpatentable over Kobayashi and Hshieh; claims 2 and 6 were not shown unpatentable over the asserted combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner asserts that a person of ordinary skill in the art (“POSITA”), “at the filing date of the ’409 [p]atent[,] would have a master’s degree in electrical engineering, and at least two years of relevant work experience in the field of integrated circuit design and manufacturing.” Pet. 13 (citing Ex. 1003 ¶ 52). Patent Owner does not dispute Petitioner’s proffered level of ordinary skill in the art. PO Resp. 9 (citing Ex. 2021 ¶ 55). We adopt Petitioner’s proffered level of ordinary skill in the art, which is supported by unopposed declaration testimony and consistent with the ’409 patent and prior art of record. See, e.g., Ex. 1001, 1:6–3:8 (describing the invention and related art in terms of integrated circuit design and fabrication). Neither party, moreover, indicates the overall result would change based on a different definition.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “Based on the arguments and evidence, we disagree with Petitioner’s proposed construction requiring the corners to be rounded via a particular process, because doing so would improperly import a process of manufacture from the Specification into apparatus claims. See Cont’l Circuits LLC v. Intel Corp., 915 F.3d 788, 799 (Fed. Cir. 2019) (explaining that, generally, a novel product that meets the criteria of patentability is not limited to the process by which it was made, however, process steps can be treated as part of a product claim if the patentee has made clear that the process steps are an essential part of the claimed invention). Here, the portions of the Specification relied on by Petitioner (Ex. 1001, 2:10–20, 4:53–64) disclose a process for manufacturing but do not make clear that the process is an essential part of the claimed invention. We also disagree with Petitioner’s assessment of the prosecution history, i.e., that the claims were amended to distinguish the claimed rounded corners from Pfirsch’s rounded corners, which, presumably, are formed as an incidental result of lithography. On the contrary, the Examiner found (and Patent Owner acknowledged) that Pfirsch has rounded corners. Ex. 1002, 276, 295, 302. As Patent Owner correctly points out, the claims were amended during prosecution to include a “circular” contact to distinguish over Pfirsch’s square contact. See id. Petitioner does not otherwise point to evidence that Patent Owner clearly and unmistakably limited the claim scope to rounded corners formed by a particular process.” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “is ‘known’ is not sufficient for a motivation to combine.” PO Resp. 47. However, the motivation-to-combine analysis is a flexible one, and the “known-technique” rationale is adequate to show a motivation to combine. For example, “if a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR, 550 U.S. at 417; see also Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380 (Fed. Cir. 2023) (quoting Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 799–800 (Fed. Cir. 2021) (“If there’s a known technique to address a known problem using ‘prior art elements according to their established functions,’ then there is a motivation to combine.”). Here, as discussed above, the record shows that top view rounding was a known technique to eliminate corners, and that corners were a known problem (e.g., corners tend to reach undesirable higher peak electric field leading to premature breakdown voltage). See, e.g., Ex. 1003 ¶¶ 37, 39, 42– 44, 55–57, 122, 133, 135–141; Ex. 1005, 7:57–8:4; Ex. 1006, 1:18–21, 2:19–39, 5:3–17, Figs. 6A–8B; Ex. 1011, 1:29–41; Ex. 1012; PO Resp. 13, 46 (citing Ex. 1011, 1:34–40); Ex. 2021 ¶ 87. Furthermore, there is no dispute that modifying Kobayashi to eliminate corners via top view rounding was anything more than a “minor and commonplace modification” of cell shape within the skill of an ordinary artisan, or that top view rounding would change Kobayashi’s established function. Pet. 60; Ex. 2021 ¶ 86.” slip op. at 30

  • Obviousness (§103) › KSR rationalesMotivation foundUnpatentable

    “We agree that Kobayashi’ s Figure 5A solely cannot be relied upon as disclosing the claimed diameter. See Hockerson-Halbertstadt, Inc. v. Avia Group Int'l, 222 F.3d 951, 956 (Fed. Cir. 2000) (patent drawings not designated as being drawn to scale cannot be relied upon to define precise proportions of elements if the specification is completely silent on the issue). However, we do not agree that Petitioner failed to show Kobayashi suggests the recited diameter. We disagree with Patent Owner’s assertion that Dr. Liu’s “vague, purported ‘design considerations’” are “unsupported.” PO Resp. 43. Although Kobayashi is silent on the width/diameter of the trench contact in Figure 5A, Kobayashi discloses trenched gates having dimensions below 0.5 μm, which demonstrates that it was known in the art, and required no more than an exercise of ordinary skill in the art, to create trenched features of widths well below 1 μm. Kobayashi also discloses that the width of each trench, and the distance between the adjacent trenches (which includes the trench contact), must be selected to optimum sizes . . . [and] these sizes . . . have some degrees of freedom.” Ex. 1005, 7:42–48. This demonstrates a POSITA would seek to optimize trench contact width or diameter. Dr. Liu’s testimony regarding design considerations suggests the desirability of a reduced diameter trench contact, e.g., to minimize the width of the trench contact for purposes of easier filling, to minimize the total width of the unit cell, and to minimize manufacturing time by reducing etch back time. See Ex. 1003 ¶¶ 111–114. As Patent Owner acknowledges, “there is always a motivation to speed up the fabrication process or shrink feature sizes of semiconductors.” PO Resp. 43 (citing 2021 ¶ 131). However, contrary to Patent Owner’s arguments, these are not generic motivations “untethered” from Kobayashi. Id. Indeed, Kobayashi directly addresses the fabrication process (including new techniques to obtain trench widths under 0.5 μm) and the need to optimize the size of trench gates and the space in between (which includes the trench contact). Ex. 1005, 7:43–54, 7:19–9:53. Patent Owner also argues that Petitioner presents no evidence that modifying Kobayashi to have a diameter smaller than 1 μm is predictable. PO Resp. 44. We disagree. As discussed above, Petitioner points to Kobayashi’s teachings that the sizes are to be optimized and that the trench gate width is smaller than 0.5 μm, which suggests making other trench features of that width was within ordinary skill. Ex. 1003 ¶ 112. Furthermore, Kobayashi’s silence as to the dimensions of the trench contact suggests that the trench contact diameter dimension is likely in the ballpark of the other explicitly disclosed trenched feature dimensions and is a matter of routine optimization. In addition, Patent Owner advances no persuasive evidence that the claimed diameter produces unexpected results or is otherwise critical. Patent Owner also argues that reducing trench contact diameter has downsides (i.e., reduced ease of filling for metal plugs and reduced current carrying capacity) not addressed by Petitioner; however, Petitioner is not required to address those tradeoffs in its Petition, and we do not see how those tradeoffs would prevent the proposed combination. PO Resp. 44; see Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.”); Winner Int'l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit, however, should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another. Instead, the benefits, both lost and gained, should be weighed against one another.”). Here, Dr. Liu listed numerous benefits of having a reduced diameter, which weigh against the potential downsides raised by Patent Owner. Ex. 1003 ¶¶ 111–114. Moreover, we do not see how the downsides/tradeoffs prevent modifying Kobayashi in the manner suggested when the same tradeoffs appear to be applicable to the ’409 patent. Having considered Patent Owner’s arguments, and taking into” slip op. at 43

  Patent outcomesUS 7,812,409 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,812,409
• Apple Inc. v. RJ Technology LLCSome claims unpatentable
  PTAB · Feb 18, 2025 · IPR2023-01350 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 5–10 are unpatentable as obvious; claims 11–14 were not shown unpatentable because the evidence did not establish the claimed capacity retention after 400 cycles.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends a person of ordinary skill in the art “would have held a Bachelor’s degree in chemistry or chemical engineering, with at least 4 years of experience in cell design, electrochemical techniques, and battery materials development.” Pet. 4. Petitioner further contends that a “Master’s Degree can substitute[] for some of the relevant experience,” and “[e]quivalent training with battery specific experience can accommodate other degreed fields.” Id. 9 The parties here do not address objective evidence of nonobviousness. Patent Owner does not dispute Petitioner’s definition of the ordinarily skilled artisan. PO Resp. 20. We adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the ’641 patent, the prior art of record, and the parties’ arguments.” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The parties agree that the term “charge cut-off voltage” is “the maximum voltage to which the battery is configured to be charged.” PO Resp 21–22; Pet. Reply 1. The parties dispute, however, whether the “charge cut-off voltage” is a “battery property” or “the voltage applied to the battery during charging.” PO Resp. 21–24; Pet. Reply 1–6. We need not resolve the precise meaning of “charge cut-off voltage” because there is no dispute that Yamaki discloses this limitation under either party’s interpretation of the claim term. Upon review of the prior art and the parties’ arguments, we determine that no terms of the ’641 patent require express construction. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))); Pet. Reply 1 (asserting that the challenged claims are unpatentable under either parties’ construction of “charge cut-off voltage”).” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “Patent Owner’s arguments do not persuasively undermine Petitioner’s position. Sakamoto expressly discloses setting the ratio of negative to positive electrode active material in the range of 1.05 to 1.30. Ex. 1005 ¶ 8. Sakamoto also explains why this range is preferable, i.e., if the ratio is roughly equal “the charge-discharge cycle performance is insufficient due to significant deterioration from charging and discharging,” and if the ratio is 10 Citations to the prosecution history of Yamaki are to the page numbers added to the lower right corner of the document. too high “too much of the compound does not participate in charging and discharging.” Id. ¶¶ 6, 8. These disclosures are sufficient to explain why one of ordinary skill in the art would have found it obvious to select the ratios disclosed in Sakamoto in Yamaki. Id. ¶ 8 (providing a secondary battery with a capacity ratio between 1.05 and 1.30 and noting that by setting the ratio within this range the resulting secondary lithium battery is “safe due to low risk of heat being generated and an explosion occurring”). We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 15

  Patent outcomesUS 7,749,641 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,749,641
• Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentable
  PTAB · Jan 17, 2025 · IPR2024-00597 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9–10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We also agree with Patent Owner that the charge cut-off voltage is not necessarily the applied voltage during charging. PO Resp. 20. Rather, depending on the charging protocol used and when in the charging cycle the voltage is applied, the applied voltage could be higher than the battery voltage. Ex. 2013; Ex. 2006 ¶ 91. For example, as discussed in more detail below with respect to the Uemura grounds, when fast charging using constant current is used and the charging rate is not slow, the applied voltage will be higher than the battery voltage when the constant current charging phase is stopped. Ex. 2006 ¶ 91; Ex. 2013. Likewise, during constant current/constant voltage charging, the applied voltage approximates the battery voltage only when the battery is nearly completely charged. Ex. 2013; Ex. 2006 ¶ 91. Thus, the applied voltage may be, but is not necessarily, the charge cut-off voltage. In view of the foregoing, we construe “charge cut-off voltage” in claims 1 and 5 as “the maximum value to which the battery is configured to be charged.” PO Resp. 18; Ex. 2008, 217:6–11; Pet. Reply 5. Contrary to Patent Owner’s arguments, however, we do not understand the phrase “configured to be charged” to necessarily represent a single voltage for the battery that is determined based on the structure and chemistry of the battery. Pet. Reply 4–5. Rather, the charge cut-off voltage is a selected potential, or voltage, of the battery or cell at the end of charging that is controlled by a circuit or device, such as a charger or control circuit within the battery. Ex. 1001, 9:50–55; Ex. 1048, 2, 7–8; Ex. 1008, 3:9–13. And, for the reasons discussed herein, the charge cut-off voltage may be, but is not necessarily, the same as the applied voltage during charging. PO Resp. 20.” slip op. at 15

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122.” slip op. at 21

  Patent outcomesUS 7,749,641 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,749,641
• Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentable
  PTAB · Jan 17, 2025 · IPR2023-01183 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9 and 10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “constructions. First, we agree with Petitioner that the ’641 patent indicates that the charge cut-off voltage selected for a particular battery need not be a fixed property of the battery or something that is set by the design and chemistry of the battery. Consistent with this conclusion, the ’641 patent discloses that a “charging device controls the charge cut-off voltage of the single lithium-ion cell within a range from 4.3 V to 5.8 V.” Ex. 1001, 9:50– 55. This strongly suggests that the charge cut-off voltage is controlled by the charger and is not necessarily an inherent property of the battery. Patent Owner contends that this is merely an unclaimed embodiment, but the relevant disclosure states that the charging device for the “present invention” may be any type of device “with the proviso that said charging device controls the charge cut-off voltage.” Id. at 9:50–53.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122. Petitioner argues that because the battery of Uemura is charged “to” a maximum voltage of 4.3 V, Uemura discloses the claimed charge cut-off voltage under either Petitioner’s or Patent Owner’s construction of the term. Pet. Reply 11–12 (citing Ex. 1009 ¶ 81; Ex. 1044 ¶¶ 56–59). This argument is not persuasive because Mr. Juzkow unambiguously testified that charging in Uemura stopped when the applied voltage reached 4.3 V, and Uemura discloses that the battery was charged “at” a voltage ranging from 4.3 V to 2.0 V, not “to” such a voltage. Ex. 1009 ¶ 81; Ex. 2008, 113:2–13; Ex. 2006 ¶ 119 n.64; Sur-reply 9. In view of the foregoing, we determine that Petitioner has not demonstrated by a preponderance of the evidence that Uemura anticipates independent claims 1 and 5 of the ’641 patent.” slip op. at 21

  Patent outcomesUS 7,749,641 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,749,641
• Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentable
  PTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed

    “Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17

  • Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed

    “The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22

  Patent outcomesUS 10,689,740 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · Nautilus
  Patents in suitUS 10,689,740
• Gce Gas Control Equipment Inc. v. Vbox, Inc.Some claims unpatentable
  PTAB · Jun 18, 2024 · IPR2023-00326 · APJ Jane E Inglese · IPR · Final written decision

  Claims 12–14 and 16 are unpatentable under § 103 over Deane alone and Deane, Dubois, and Berntson; claims 1–11 and 15 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for patent owner

    “III. ANALYSIS A. Level of Ordinary Skill in the Art The level of ordinary skill in the art at the time of the invention is a factual determination that provides a primary guarantee of objectivity in an obviousness analysis. Al-Site Corp. v. VSI Int’l Inc., 174 F.3d 1308, 1324 (Fed. Cir. 1999) (citing Graham v. John Deere Co., 383 U.S. 1, 17–18 (1966); Ryko Mfg. Co. v. Nu-Star, Inc., 950 F.2d 714, 718 (Fed. Cir. 1991)). Based on Petitioner’s contention, which Patent Owner does not dispute, we find that a person of ordinary skill in the art would have had a bachelor’s degree in mechanical engineering, chemical engineering, or a related field, and two years of experience in the research, design, or development of POCs and related hardware, software, and firmware. Compare Pet. 21, with Resp. 11. Our finding is supported by Dr. Knaebel’s testimony. Ex. 1003 ¶¶ 226–228. The level of ordinary skill in the art, as defined above, appears consistent with the disclosures of the asserted prior art and the written description of the invention provided in the ’614 patent.” slip op. at 8

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “Deane thus teaches that adsorbent housing 602 and adsorbent bed columns 508a, 508b—the asserted separation cartridge—are part of an apparatus that rests on a support surface such as a table or floor. Based on Deane’s disclosure, we find persuasive Patent Owner’s contention, and Patent Owner’s witness’s opinion, that Deane’s housing 602/adsorbent bed columns 508a, 508b (separation cartridge) cannot be removed from the receptacle by movement of the separation cartridge vertically downward. Resp. 37–38; Ex. 2001 ¶¶ 118–131. Neither Petitioner nor Petitioner’s witness, Dr. Knaebel, points to any evidence of record showing that one of ordinary skill in the art would have understood that Deane’s housing 602/adsorbent bed columns 508a, 508b (separation cartridge) could be removed from manifold 512 (receptacle) by moving housing 602/adsorbent bed columns 508a, 508b (separation cartridge) downward when the apparatus is resting on a table or floor, as taught by Deane. Pet. 42–43; Ex. 1078 ¶¶ 121–161. Petitioner fails to show that Deane’s housing 602/adsorbent bed columns 508a, 508b (separation cartridge) could be removed from the receptacle by movement of the separation cartridge in the downward (second) direction, as required by the removal direction limitation of claim 1. Petitioner, therefore, does not establish unpatentability under its axial movement theory.” slip op. at 26

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Giving effect to “by movement relative to the receptacle,” when interpreting this phrase in combination with “a separation cartridge selectively removable from a receptacle,” requires that the separation cartridge is removable from the receptacle by movement of the separation cartridge itself. Interpreting the removal direction limitation to encompass a stationary separation cartridge, as Petitioner proposes, would render “by movement relative to the receptacle” superfluous. Specifically, Petitioner’s interpretation of “relative movement” does not accord weight to the recitation “movement relative to the receptacle,” which requires something other than the receptacle—the separation cartridge—to move in order for movement to occur with reference to or in comparison with the receptacle. Petitioner’s interpretation of “relative movement” as permitting removal of the separation cartridge from the receptacle when the separation cartridge remains stationary, is inconsistent with the plain language of removal direction limitation as a whole. The plain language of the removal direction limitation indicates that the separation cartridge must be removable from the receptacle by movement of the separation cartridge in a specified (first) direction. Claim 1 defines the first direction as a direction opposite the (second) direction in which the inlet and outlet are oriented. The plain language of the removal direction limitation, therefore, requires that the separation cartridge is removable from a receptacle by movement of the separation cartridge in comparison to the receptacle in a direction opposite the direction in which the separation cartridge’s inlet and outlet are oriented.” slip op. at 15

  • Strike new argumentNew argument disregardedDecided for patent owner

    “(a) Untimely new theory of unpatentability We agree with Patent Owner (Sur-Reply 4) that Petitioner’s relative movement theory is an impermissible new theory of unpatentability improperly presented for the first time in the Reply. Corephotonics, Ltd. v. Apple Inc., 84 F.4th 990, 1008–09 (Fed. Cir. 2023) (A petitioner may not raise in a reply “‘an entirely new theory of prima facie obviousness absent from the petition,’ even if the new theory is responsive to the patent owner’s response or the Board’s institution decision.”) (quoting Wasica Finance GmbH v. Continental Automotive Systems, Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017); see also Henny Penny Corp. v. Frymaster LLC, 938 F. 3d 1324, 1330–31 (Fed. Cir. 2019) (“We conclude that the Board did not abuse its discretion in . . . disregarding its [petitioner’s] new theory first raised in reply.”). Petitioner does not present the relative movement theory in the Petition, and instead presents it for the first time in the Reply. Pet. 42–43. Far from fairly meeting any argument introduced by Patent Owner in the Response, this new theory unfairly changes the thrust of the challenge.” slip op. at 27

  Patent outcomesUS 11,389,614 mixed
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,389,614
• Wolfspeed, Inc. / Ideal Industries Lighting, LLC D/B/A Cree Lighting v. Cao Lighting, Inc.Some claims unpatentable
  PTAB · Sep 28, 2023 · IPR2022-00848 · APJ Brian D Range · IPR · Final written decision

  Claims 21, 22, 25, 26, 28–30, 32–36, 40, 42–44, 47–49, 52, 53, 56–59, 62, 63, 65–68, 71–73, 77, 78, 81, 82, 85, 86, and 88–91 are unpatentable under § 103; claim 41 is not shown …

  RulingsFinal written decision

  • ExcludeMotion to exclude, deniedDenied

    “declaration addresses the Patent Owner Response and is relevant to the issues at hand. We start with an important observation: claim 18 (the only independent claim at issue) is an apparatus claim; the claim is directed to a “semiconductor light source.” Ex. 1001, 9:52, EPRC 1:32. One requirement of this apparatus is that it comprise “a semiconductor chip” (id. at 9:66) where “said semiconductor chip is a light emitting diode (LED) chip EPRC, 1:34–36. As we explain when addressing claim construction, infra, we adopt Patent Owner’s proposed construction (Resp. 14) of “said semiconductor chip is a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” as referring to “a semiconductor LED chip capable of emitting light greater than about 40 milliwatts.” See Section III.D, infra (emphasis added). Because of these recitations, Petitioner bears the burden of establishing that the prior art teaches or suggests a semiconductor LED chip “capable of emitting light greater than about 40 milliwatts.” As explained herein, we determine that in the Petition, Petitioner met this burden by establishing by a preponderance of the evidence that the Krames reference teaches an LED chip that has this capability. Pet. 53 (quoting Ex. 1008, 10). Notably, claim 18 does not require actual operation of anything at greater than 40 milliwatts because claim 21 is not a method claim. Petitioner never had a burden of establishing a method of running the Krames reference’s LED at this power output within a semiconductor light source.” slip op. at 9

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We agree with Patent Owner that the challenged claims relate to light fixtures, LED packaging, and LED chip layer structure and that the ’770 patent claims reflect “a hybrid of the light bulb art and semiconductor art.” Resp. 16. The prior art of record, for example, Begemann, likewise reflects “a hybrid of the light bulb art and semiconductor art.” Id. (quoting Pet. 28). Petitioner’s expert, Dr. Lebby, agreed that a person having ordinary skill in 28:16. While Petitioner’s proposed description of a person having ordinary skill in the art could, in some instances, be sufficient to qualify a person as having ordinary skill, Patent Owner’s proposal is a more complete and accurate description of the level of skill commensurate with the scope of the challenged ’770 patent claims. Patent Owner’s description appears consistent with the prior art and patent specification before us and is supported by witness testimony. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself may reflect an appropriate level of skill). For the purpose of this Decision, we adopt Patent Owner’s description. We further note that the outcome of our decision would be the same under either party’s asserted skill level.” slip op. at 15

  • Prior constructionPrior construction adoptedTerm construed patent owner constructionDecided for patent owner

    “Delaware held, with respect to related U.S. Patent 6,465,961, construed “a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” as “at least one LED chip is capable of emitting light greater than about 40 milliwatts.” Resp. 14 (citing Ex. 1024, 15–18). Petitioner responds that the phrase “needs no construction” and that Petitioner’s grounds meet this construction. Reply 1. We note that the language of claim 18 does not precisely match the language the District Court considered, it is substantively the same. The record supports a construction very similar to the construction the District Court adopts, and we reference the District Court’s reasoning. Ex. 1024, 15– 18. We, thus, construe claim 18’s recitation that “said semiconductor chip is a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” as referring to “a semiconductor LED chip that is capable of emitting light greater than about 40 milliwatts.” It is unnecessary to construe any other claim terms in this Decision because none of the parties’ disputes turn on the meaning of other terms. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017).” slip op. at 17

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedReference is prior artDecided for petitioner

    “The facts above are evidence of the Krames reference’s publication as of June 29, 2000, because the facts tend to make the Krames reference’s publication as of June 29, 2000, more probable than it would be without the evidence. See Fed. R. Evid. 401(a) (defining evidence as relevant “if it has any tendency to make a fact more or less probable than it would be without the evidence”). The evidence is sufficient to support publication. Meanwhile, no evidence of record suggests that Krames was not a printed publication as of June 29, 2000. Thus, a preponderance of the evidence supports Krames’s prior art status. Patent Owner argues that Ms. Watters “never establishes a firm date when Krames was purportedly available to the relevant public.” Resp. 21. Patent Owner bases this argument by taking a tortured reading of Ms. Watters’s statement that “[m]embers of the interested public could locate a copy of [the Proceedings] on or after June 29, 2000, the date it was catalogued.” Id. (quoting Ex. 1020, 3); see also Sur-Reply 12–13. The best understanding of Ms. Watters’s statement, in view of the context of Ms. Watters explaining the library’s cataloguing process, is that a member of the interested public had two options: the person could choose to locate the Proceedings on June 29, 2000, or the person could choose to locate the Proceedings after June 29, 2000. Thus, the statement supports public availability as of June 29, 2000.” slip op. at 21

  Patent outcomesUS 6,634,770 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR
  Patents in suitUS 6,634,770

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.