- Microsoft Corporation v. Partec AGInstitutedPTAB · Jul 8, 2025 · IPR2025-00318 · APJ Jameson Lee · IPR · Institution
The Board instituted IPR on claims 1–10, finding a reasonable likelihood that Lippert and Budenske render the challenged claims obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a). An inter partes review may not be instituted unless the information presented in the Petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). The “reasonable likelihood” standard is “a higher standard than mere notice pleading” but “lower than the ‘preponderance’ standard to prevail in a final written decision.” Hulu, LLC v. Sound View Innovations, LLC, IPR2018-01039, Paper 29 at 13 (PTAB Dec. 20, 2019) (precedential).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner states that for purposes of the Preliminary Response it has applied Petitioner’s recitation of the level of skill in the art. Prelim. Resp. 15. Patent Owner has not proposed its own articulation of the level of ordinary skill. We adopt Petitioner’s statement of the level of ordinary skill in the art. It is supported by the testimony of Dr. Long and not disputed by Patent Owner. Further, it appears consistent with what is reflected by the content of the applied prior art. Cf. Okajima v. Bourdeau, 261 F.3d 1350, 1354–55 (Fed. Cir. 2001) (the applied prior art may reflect an appropriate level of skill). B.” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Regarding motivation to combine, Petitioner explains: A POSITA would have been motivated to implement the heterogeneous computing system of Lippert with the dynamic iterative sub-tasks assignment method of Budenske partly because doing so would facilitate efficient distributions of subtasks and processing resources during execution of an iterative application, thus fully leveraging the flexibility of the heterogeneous architecture and “reduc[ing] execution time” of computing iterations. EX1005, 391; EX1003, ¶59. Pet. 17. Petitioner further explains: Second, Budenske provides express motivation from implementing its method in a heterogeneous computing system such as Lippert, namely to “fully utilize the architectural flexibility of such a [heterogeneous parallel computing] system.” EX1005, 390. A POSITA would have found that the dynamic flexibility of the heterogeneous computing system taught by Lippert through the “loose coupling” of computation nodes and boosters (EX1004, [0013], [0015] (describing “a maximum flexibility in providing hardware resources”)), naturally complements the dynamic flexibility of remapping sub-tasks among processing resources to account for the actual processing of the sub-tasks by the processing resources during preceding iterations, as taught by Budenske (EX1005, 391), and that the combination for these teachings would provide increased flexibility for optimally processing iterative applications. EX1003, ¶60.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“teaching away” argument: “As discussed above, Budenske actually teaches away from distributing subtasks between processor types, noting that for its teachings to work all processors utilized for a given task must be of the same type. EX1005 at 392; Section VI.A.1.” Prelim. Resp. 23. We already discussed and rejected above Patent Owner’s contention that Budenske describes its teachings would work only if all processors utilized for a given task are of the same type. Thus, the “teaching away” argument also lacks merit. Alternatively, Patent Owner asserts that even if we reject Patent Owner’s “teaching away” argument, “Budenske’s teachings would have strongly weighed against motivating a skilled artisan to develop a system according to the ‘442 Patent claims.” Prelim. Resp. 23–24. We disagree. As discussed above, Budenske acknowledged that its resource mapping method would be more easily accomplished if all the processors were of the same type. It nowhere indicates, as Patent Owner argues, that the method would work only if all the processors were of the same type. slip op. at 24
§ 103 obviousnessPatents in suitUS 11,537,442 - PTAB · Jun 18, 2025 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted IPR on claims 1, 2, 5–7, 9, 16, and 17, finding a reasonable likelihood that claim 1 is anticipated by Boyer.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“approximately two weeks before the statutory deadline for a final written decision, but the most recent median time-to-trial statistics for Judge Gilstrap in the Eastern District of Texas indicate that the actual trial date will likely be in July 2026, which is later than the statutory deadline to issue a final written decision in this proceeding in mid-June 2026. See Ex. 2001, 7 (median time from filing to trial of 23.2 months); Prelim. Resp. 10. Thus, we find this factor is neutral or weighs slightly against discretionary denial.” slip op. at 10
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this preliminary stage, we determine whether the information presented shows a reasonable likelihood that Petitioner would prevail in establishing that at least one of the challenged claims would have been unpatentable over the proposed prior art. We analyze the asserted grounds with the above-noted principles in mind.” slip op. at 7
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears to be consistent with the ’713 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 16
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed
“We note that, as discussed below, we are able to determine whether to institute inter partes review of the ’713 patent without expressly construing the term “from multiple print heads or deposition lines.” See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). As for Patent Owner’s argument that Petitioner has failed to carry its burden to identify how the claims are to be construed, we disagree on the present record. Although Petitioner does not provide a preferred construction for the single term it proposes requires construction, Petitioner does identify which of its two alternative constructions applies to each of its asserted grounds of unpatentability. Pet. 6 (“Under the first construction, [the obviousness grounds] are applicable, and [the anticipation ground] would be excluded from the claim scope. Under the alternative construction, all of [the asserted grounds] are applicable.”). In our view, this approach does not fail to satisfy Petitioner’s burden under 37 U.S.C. § 42.104(b)(3).” slip op. at 17
Claim construction§ 102 anticipationDiscretionary denialcites PhillipsPatents in suitUS 9,421,713 - PTAB · Jun 18, 2025 · IPR2025-00311 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted IPR of claims 1, 3–11, and 17–22 on all asserted grounds because Petitioner showed a reasonable likelihood of prevailing on claim 1 over Mazumder and Mori.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“based on Petitioner’s first stipulation filed on December 18, 2024.15 Prelim. Resp. 13–15. Patent Owner does not address Petitioner’s updated second stipulation filed on April 8, 2025. This updated second stipulation mitigates any concerns of duplicative efforts between the district court and the Board, as well as concerns of any potentially conflicting decisions. See Sand at 12. We therefore find that this factor weighs against exercising discretion to deny institution. See id., n.5. 5. Whether Petitioner and the Defendant in the Parallel Proceeding are the Same Party Whereas Petitioner does not address factor 5, Patent Owner argues that the parties to this proceeding are both in the related district court litigation. Pet. 98–99; Prelim. Resp. 15. While it is common in IPR proceedings for the petitioner and patent owner to also be parties in a related district court proceeding, this factor weighs slightly in favor of discretionary denial. Fintiv, Paper 11 at 13–14.” slip op. at 15
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“c) Conclusion Regarding Claim 1 Based on the current record, we determine that there is a reasonable likelihood that Petitioner will prevail in demonstrating that claim 1 is unpatentable as obvious over the combination of Mazumder and Mori. Accordingly, we institute inter partes review with respect to all claims and all grounds asserted in the Petition. 5. Claims 3, 5–7, 9, 10, and 19–22 Because Petitioner demonstrates a reasonable likelihood of success in proving that at least one claim of the ’324 patent is unpatentable, we institute on all grounds and all claims raised in the Petition. See 37 C.F.R. § 42.108(a). Therefore, at this stage of the proceeding, it is not necessary for us to provide an assessment of every challenge raised by Petitioner, especially, as in this case, when Patent Owner does not separately argue those claims. See Prelim. Resp. 28–46. Those challenges, in our view, are best left for trial after full development of the record.” slip op. at 27
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“reference must be analogous art to the claimed invention. In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004). For a reference to be analogous art, it must be “either in the field of the applicant's endeavor or [be] reasonably pertinent to the problem with which the inventor was concerned.” In re Kahn, 441 F.3d 977, 986-87 (Fed. Cir. 2006) (citing In re Oetiker, 977 F.2d 1443, 1447 (Fed. Cir. 1992)). “A reference is reasonably pertinent if, even though it may be in a different field from that of the inventor's endeavor, it is one which, because of the matter with which it deals, logically would have commended itself to an inventor's attention in considering his problem.” In re Clay, 966 F.2d 656, 659 (Fed. Cir. 1992).” slip op. at 20
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Mazumder because “the presentation of both image types would have beneficially aided the remote user to more easily visually compare the actual image and virtual image to quickly identify any defects or problems with the fabrication process.” Pet. 23–24 (citing Ex. 1003 ¶ 113). Patent Owner argues that “it is hindsight to use ‘the invention to define the problem the invention solves.’” Prelim. Resp. 43 (quoting Mintz v. Dietz & Watson, Inc., 679 F.3d 1372, 1377 (Fed. Cir. 2012); citing AT&T Services Inc. et. al. v. Innovative Sonic Ltd., IPR2024-001143 (PTAB Feb. 11, 2025)). According to Patent Owner, because neither Mazumder nor Mori teaches visual comparison of image types, the idea to improve the Mazumder-Mori combination by simultaneously displaying different image types and thus permitting visual comparison must be driven by hindsight. Id. at 44–45. But Petitioner cites evidence other than the ’324 patent to support the person of ordinary skill in the art having a desire to visually compare the different images presented in the Mazumder-Mori combination. Pet. 23–24 (citing Ex. 1003 ¶ 113). Specifically, Dr. Wolfe testifies that “the presentation of the actual images captured by the camera and the virtual images simultaneously within the user interface would have beneficially aided the remote user to more easily visually compare the actual image and virtual image to quickly identify any defects or problems with the fabrication process” and that a person of ordinary skill in the art would have recognized this. Ex. 1003 ¶ 113. Thus, Petitioner has shown sufficiently for the purpose of the present decision that Mori teaches or suggests the disputed limitation of claim 1. We encourage the parties to develop the arguments and the record surrounding this issue further during the trial.” slip op. at 26
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 8,562,324 - PTAB · Jun 11, 2025 · IPR2025-00263 · APJ Barry L Grossman · IPR · Institution
Instituted IPR for claims 1–30 on all asserted grounds; the Board found a reasonable likelihood that claims would be unpatentable over Haley and Lai.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“III. CONCLUSION We have determined that there is a reasonable likelihood that Petitioner will prevail on at least one challenged claim. Accordingly, we institute an inter partes review on all challenged claims on each asserted ground. PGS Geophysical, 891 F.3d at 1360 (A decision to institute is a “yes-or-no institution choice respecting a petition, embracing all challenges included in the petition.”).” slip op. at 42
- BurdenInstituted
“limitations of clauses 1.3 and 1.4, but concedes that Haley does not disclose that its driver member has “at least one longitudinal edge with a plurality of spaced-apart protrusions,” as required by clause 1.4. Petitioner further asserts, however, that it would have been obvious “to replace Haley’s hydraulic lifter with the claimed ‘lifter,’ disclosed by [Lai]”. Pet. 13. (citing Ex. 1003 ¶ 54). Dr. Vallee’s cited Declaration testimony provides his opinion on this issue, which is consistent with Petitioner’s argument. Petitioner also asserts that “Lai discloses an electrically-powered, mechanical lifting mechanism with a structure that is essentially identical to the ‘lifter member’ disclosed in the ’776 patent. Pet. 13. Petitioner provides side-by-side colored figures from the ’776 patent and from Lai, reproduced below, to illustrate its argument. Pet. 14. According to Petitioner, the side-by-side comparison of Petitioner’s colored versions of Fig. 12, from the ’776 patent, with Petitioner’s colored versions of Figs. 4 A–D, reproduced above, illustrate why and how the proposed modification would have been obvious. As described by Petitioner, the “lifter member” of the ’776 patent includes a rotatable cam lifter 100 (yellow), with pins 104, 106, and 108 (green) on its face surface that engage protrusions 92 (blue) on the driver member 90 (orange). Pet. 13 (citing Ex. 1001, 9:30–46, 16:34–48, Fig. 12). Petitioner also cites the “two-pin variants: lifter members 465 and 480” shown in Figs. 31, 33 of the ’776 patent. Id. Petitioner also asserts that, as shown in the side-by-side comparison” slip op. at 33
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)No construction neededOther
“Petitioner asserts the term “lifter member” in the claims of the ’776 patent is “a means-plus-function term” because the claims “lack any ‘recital of structure, material, or acts in support thereof’ for the ‘lifter’ element.” Pet. 7 (citing 35 U.S.C. § 112(f)). Petitioner also asserts “[t]he Federal Circuit held that the term ‘lifter member’ in the related patents is a means-plus-function term subject to §112(f).” Pet. 7. Petitioner cites no authority for this assertion. We understand this assertion to refer to the decision in Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369 (Fed. Cir. 2022), identified by Petitioner as a related matter. Pet. 2. In this case, which involved patents from the same family as the ’776 patent (see Section I.C of this Decision), the Federal Circuit concluded that “§ 112 ¶ 6 applies to the ‘lifter member’ limitation, and it must be construed to cover only ‘the structure, materials, or acts described in the specification as corresponding to the claimed function and equivalents thereof.’” Id. at 22 F.4th 1379–1381. “Where multiple patents derive from the same parent application and share many common terms, we must interpret the claims consistently across all asserted patents.” Samsung Elecs. Co. v. Elm 3DS Innovations, LLC, 925 F.3d 1373, 1378 (Fed. Cir. 2019) (citing SightSound Techs., LLC v. Apple Inc., 809 F.3d 1307, 1316 (Fed. Cir. 2015) (internal quotation marks omitted). Patent Owner asserts that Petitioner: fails to comply with the requirement of 37 C.F.R. § 42.104(b)(3) to specifically identify the structure in the specification associated with that element. As ‘lifter’ is present in every challenged claim under all four grounds, Petitioner’s failure to provide a claim construction for ‘lifter’ is fatal to its Petition. Prelim. Resp. 13. We disagree. First, the claims in the ’776 patent do not use the single word “lifter” alone. The term used in some of the claims, see, e.g., independent claims 1 and 17, and the claims dependent from claims 1 or 17, is “lifter member.” We recognize that the written description in the ’776 patent states “the rotary-to-lifter 100 is also sometimes referred to herein as a ‘lifter member,’ or simply as a ‘lifter.’” Ex. 1001, 9:5–7. This suggests that that term “lifter” is intended to mean the “lifter member,” which makes the use of either term a distinction without a substantive difference. Moreover, neither independent claims 9 or 24, nor the claims dependent from claims 9 and 24, use the word “lifter” or “lifter member. Second, as stated in Petitioner’s Preliminary Reply, the Petition “identifies the portions of the specification that describe the corresponding structure for the ‘lifter’ when comparing its structure to that of the Lai prior art.” Prelim. Reply 1. The Petition provides a colored version of Figure 12 from the ’776 patent (reproduced below) and identifies the following corresponding structures from the Specification of the ’776 Patent: The “lifter member” of the ’776 patent includes a rotatable cam lifter 100 (yellow [ ]), with pin 104, 106, and 108 (green) on its face surface that engage protrusions 92 (blue) on the driver member 90 (orange). ’776 patent, 9:30–46, 16:34–48, Fig. 12. The ’776 patent also discloses two-pin variants: lifter members 465 and 480 in Figs. 31, 33. [citing] ’776 patent, 32:15–30, 32:48–63. Petition at 13. Based on the record before us, we determine that this identification of corresponding structure is sufficient to satisfy 37 C.F.R. § 42.104(b)(3). We also note that at this stage of the proceeding, Patent Owner does not dispute that Petitioner has identified the correct corresponding structure. To the extent the parties wish to further address the construction of this claim limitation, they may do so during trial, as permitted by our rules.” slip op. at 16
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“to mean “a chamber that is distinct from the displacement volume of the hollow cylinder and contains part of the working air volume during operation.” Pet. 8. According to Petitioner “there is nothing in the intrinsic record or any of the claims of the ’776 patent that prevents the ‘main storage chamber’ from being in the hollow cylinder, so long as it is distinct from its separately-recited ‘displacement volume.’” Id. at 9 (emphases added). Patent Owner asserts that “[g]rounds 2 and 4 each requires this Board to interpret the ‘storage chamber’ to be the same structure as the hollow cylinder.” Prelim. Resp. 31. According to Patent Owner, “[t]he Federal Circuit, considering both parties’ claim construction arguments, rejected that construction.” Id. Patent Owner does not provide any citation to support its reference to the Federal Circuit decision. It appears to be a reference to the Kyocera decision considering review of the ITC determination. See Kyocera, 22 F.4th at 1383. That decision, however, construed claims in a related patent to “require two distinct structures: the main storage volume and a smaller “hollow cylinder” contained within the main storage volume. Based on the record before us, Petitioner’s proposed construction is consistent with the Federal Circuit’s construction, which states two structures can be distinct even if one distinct structure is “contained within” the other distinct structure. Although the parties dispute the construction of the “storage chamber” claim limitation, this dispute relates only to Grounds 2 and 4. See Prelim. Resp. 31. We need not resolve it to determine whether to institute review. The parties are welcome to develop their arguments regarding this claim limitation during trial. 3. Conclusion Regarding Claim Construction Our claim construction analyses in this decision to institute a trial do not preclude the parties from arguing their proposed constructions of the claims during trial. Indeed, the parties are hereby given notice that claim construction, in general, is an issue to be addressed at trial. Claim construction will be determined at the close of all the evidence and after any hearing. The parties are expected to assert all their claim construction arguments and evidence in the Petition, Patent Owner’s Response, Petitioner’s Reply, or otherwise during trial, as permitted by our rules.” slip op. at 19
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,241,776 - PTAB · Jun 11, 2025 · IPR2025-00264 · APJ Scott C Moore · IPR · Institution
The Board instituted IPR of claims 1–15 on all asserted grounds, finding a reasonable likelihood that Koki would prove the claims obvious over Haley and Lai.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We may institute an inter partes review when “the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). If we institute an inter partes review, the trial must encompass all claims and grounds identified in the Petition. 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”). For the reasons set forth below, we conclude that there is a reasonable likelihood that Petitioner will prevail in establishing the unpatentability of all challenged claims. We, therefore, institute inter partes review of claims 1–15 on the grounds asserted in the Petition. B.” slip op. at 2
- BurdenInstituted
“not identical” to the structure that Petitioner identifies as corresponding to the “lifter” claim limitation. Prelim. Resp. 19. We agree that these structures are not identical. But on this record, they appear, at least preliminarily, to be equivalent. As Petitioner explains, both structures utilize a rotatable cam with pins to translate a driver (driver member 90 of the ’167 Patent and hammer 6 of Lai) into a position where the driver is ready for use. See Pet. 12–15. Patent Owner does not otherwise contest Petitioner’s showing that Lai teaches or suggests the subject matter set forth in limitations 1.4, 1.5, and 1.6, and we find Petitioner has made a sufficient showing that Lai does so.” slip op. at 20
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner
“1. Lifter The Petition explicitly states that the “lifter” limitation is a means- plus-function limitation—a contention Patent Owner does not dispute. See Pet. 6; Prelim. Resp. 9–11. Patent Owner argues, however, that Petitioner has “fail[ed] to identify any structure in the ’007 [sic] Patent to perform the claimed function.” Prelim. Resp. 10. We disagree. The Petition identifies the following corresponding structures from the Specification of the ’167 Patent: The “lifter” of the ’167 patent includes a rotatable cam lifter 100 (yellow, below left), with pin 104, 106, and 108 (green) on its face surface that engage protrusions 92 (blue) on the driver member 90 (orange). ’167 patent, 9:36-52, 16:39-53, Fig. 12. The ’167 patent also discloses two-pin variants: lifter members 465 and 480 in Figs. 31 and 33. ’167 patent, 32:21-36, 32:54- 33:2. satisfy 37 C.F.R. § 42.104(b)(3). We also note that at this stage of the proceeding, Patent Owner does not dispute that Petitioner has identified the correct corresponding structure. To the extent the parties wish to further address the construction of this claim limitation, they may do so during trial.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Petitioner has identified the storage chamber of Haley as being chamber 85, a volume of space bounded by housing 40, extension cylinder 76, and elongate accumulator shell 80. See Pet. 9–10; Ex. 1004 Fig. 1. Haley’s elongate accumulator shell 80 (which Petitioner identifies as the removal top cap) is not the same as chamber 85; it is merely one component of the structure that encloses chamber 85. See id. And, though the Petitioner-identified removable top caps of Haley (a cylinder-shaped component, see id.) and Saari/Enstrom (a removable sleeve that extends into the interior of Saari/Enstrom’s cylinder, see id. at 48–49) have different Petitioner-identified storage chambers. We, therefore, are not persuaded that Petitioner’s contentions necessarily rely on implicit and inconsistent claim constructions.” slip op. at 10
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,845,167 - PTAB · Jun 11, 2025 · IPR2025-00262 · APJ Mitchell G Weatherly · IPR · Institution
The Board instituted IPR of claims 1–20 on all grounds, finding a reasonable likelihood that Haley and Lai render the claims obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record,1 we conclude that Petitioner is reasonably likely to prevail with respect to at least one of the challenged claims.” slip op. at 2
- Other 314aDenied
“Patent Owner argues that we should discretionarily deny the Petition based on alleged deficiencies in the Petition. Specifically, Patent Owner argues that “even if arguments as to a few claims might have been properly presented in the Petition, a decision to institute here would require the Board to address—for the first time and with no Petitioner input—critical claim construction issues affecting nearly every claim” in contravention of the requirements of 37 C.F.R. § 42.104(b)(3). Prelim. Resp. 34–35. For the reasons discussed above, we are not persuaded on the current record that Petitioner has violated 37 C.F.R. § 42.104(b)(3), or that critical and unresolved claim interpretation issues justifying discretionarily denying the Petition exist. We, therefore, decline to deny institution on this basis.” slip op. at 10
- Skill levelSkill level board ownOther
“we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The parties’ briefs do not propose a specific definition of a level of ordinary skill in the art. See generally, Pet., Prelim. Resp. Dr. Vallee, however, testifies that one of ordinary skill in the art relevant to the ’954 patent: would have either (i) a Master’s degree in mechanical engineering with at least two years of experience in power nailer design; (ii) a Bachelor’s degree in mechanical engineering with at least five years of experience in powered nailer design; or (iii) ten (or more) years of experience in powered nailer design. This experience in powered nailer design would include mechanical design, tool design, manufacturing, mechanics of materials, stress analysis, ergonomics, and human factors. Ex. 1003, ¶ 49. For purposes of this Decision, we adopt and apply Dr. Vallee’s formulation regarding the level of ordinary skill in the art.” slip op. at 6
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesOther
“1. Lifter The Petition contends that the “lifter” limitation is a means-plus- function limitation, Pet. 7, which Patent Owner does not dispute, Prelim. Resp. 15–26. Patent Owner argues, however, that Petitioner has “fail[ed] to identify any structure in the ’007 [sic, ’954] Patent to perform the claimed function.” Prelim. Resp. 15. We disagree. Petitioner identifies the structures in the Specification corresponding to the “lifter” as follows: The “lifter member” of the ’954 patent includes a rotatable cam lifter 100 (yellow, below left), with pin 104, 106, and 108 (green) on its face surface that engage protrusions 92 (blue) on the driver member 90 (orange). ’954 patent, 9:25–41, 16:32–46, Fig. 12. The ’954 patent also discloses two-pin variants: lifter members 465 and 480 in Figs. 31, 33. ’954 patent, 32:12–27, 32:45–60. Pet. 15. This identification of corresponding structure is sufficient to satisfy 37 C.F.R. § 42.104(b)(3). We also note that at this stage of the proceeding, Patent Owner does not dispute that Petitioner has correctly identified the corresponding structure. The parties may further address the proper interpretation of “lifter” at trial.” slip op. at 7
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 10,478,954 - PTAB · Jun 11, 2025 · IPR2025-00261 · APJ Mitchell G Weatherly · IPR · Institution
Instituted IPR of claims 1–20 on all grounds after finding a reasonable likelihood that Haley anticipates claims 1, 7, 8, 17, and 20 and Haley with Lai renders the remaining claims obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record,1 we conclude that Petitioner is reasonably likely to prevail with respect to at least one of the challenged claims.” slip op. at 2
- Other 314aInstitution denied discretionary otherDenied
“Patent Owner argues that we should discretionarily deny the Petition based on alleged deficiencies in the Petition. Specifically, Patent Owner argues that “even if arguments as to a few claims might have been properly presented in the Petition, a decision to institute here would require the Board to address—for the first time and with no Petitioner input—critical claim construction issues affecting nearly every claim” in contravention of the requirements of 37 C.F.R. § 42.104(b)(3). Prelim. Resp. 33–35. For the reasons discussed above, we are not persuaded on the current record that Petitioner has violated 37 C.F.R. § 42.104(b)(3), or that critical and unresolved claim interpretation issues justifying discretionarily denying the Petition exist. We, therefore, decline to deny institution on this basis. E. Claims 1, 7, 8, 17, and 20: Anticipation by Haley” slip op. at 11
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner
“1. Lifter The Petition contends that the “lifter” limitation is a means-plus- function limitation, Pet. 7, which Patent Owner does not dispute, Prelim. Resp. 10–14. Patent Owner argues, however, that Petitioner has “fail[ed] to identify any structure in the ’007 Patent to perform the claimed function.” Prelim. Resp. 10. We disagree. Petitioner identifies the structures in the Specification corresponding to the “lifter” as follows: The “lifter” (“lifter member”) of the ’007 patent includes a rotatable cam lifter 100 (yellow below left), with pin 104, 106, and 108 (green) on its face surface that engage protrusions 92 (blue) on the driver member 90 (orange). ’007 patent, 9:36–52, 16:39–53, Fig. 12. The ’007 patent also discloses two-pin variants: lifter members 465 and 480 in Figs. 31, 33. ’007 patent, 32:23–38, 32:56–33:4. Pet. 17. This identification of corresponding structure is sufficient to satisfy 37 C.F.R. § 42.104(b)(3). We also note that at this stage of the proceeding, Patent Owner does not dispute that Petitioner has correctly identified the corresponding structure. The parties may further address the proper interpretation of “lifter” at trial.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“gas pressure system” recited in the preamble of independent claims 1 and 17. Prelim. Resp. 21–22. Patent Owner further argues that Petitioner, through its comparison of claims 1 and 17 to Haley, improperly implies that the “gas pressure system” can be “limited to a distinct portion of a power tool.” Id. at 23. Patent Owner contends that such an interpretation is improper because the “gas pressure system” must refer to “the entire system,” because the “structure of the claims themselves . . . include[s] . . . every component of the tool.” Id. We disagree. The “gas pressure system” recited in the preambles of claims 1 and 17 expressly refers to a system that is “for a power tool” and thus does not necessarily refer to “the entire” tool or “every component of the tool.” Ex. 1001, 39:6 (claim 1), 40:51 (claim 17). Neither claim 1 nor claim 17 recites, for example, the lifter or driver, which are required elements of an “entire” tool. Id. at 39:6–22 (claim 1), 40:51–67 (claim 17). The lifter and driver are introduced in dependent claims 2 and 18. Id. at 39:23–30 (claim 2), 41:1–9 (claim 18). Still other necessary components of a tool, e.g., a motor and power source, are introduced in dependent claims 5 and 19. Id. at 39:40–42 (claim 5), 41:10–13 (claim 19). By contrast to claims 1 and 17, independent claims 9 and 14 recite a “portable fastener driving tool” and expressly recite many necessary components of such a tool including the driver, lifter, prime mover, and power source. Id. at 39:54 (claim 9), 40:20 (claim 14). Accordingly, we find that the “gas pressure system” of claims 1 and 17 broadly refers to a portion of a power tool rather than the “entire system” or “every component of the tool.” slip op. at 8
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSRPatents in suitUS 11,034,007 - PTAB · Jun 6, 2025 · IPR2025-00257 · APJ Lilan Ren · IPR · Institution
The Board instituted IPR on claims 1–15 and all asserted grounds, finding a reasonable likelihood that claim 1 is unpatentable over Cable and Naware and over Comb and Tummala.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“discussed below, we decline to exercise our discretion to deny the Petition.” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314 (2024); 37 C.F.R. § 42.4(a) (2024). Institution of an inter partes review requires that “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, we determine that there is a reasonable likelihood that Petitioner will prevail with respect to at least one challenged claim, and we institute an inter partes review.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“persuaded that Petitioner has sufficiently shown for purposes of institution that a person of ordinary skill in the art would have been motivated to combine the teachings of Cable and Naware in the manner argued by Petitioner. For example, both references directly relate to 3D printing, and we are persuaded that Cable teaches “a heated build platform and calls on the POSITA to implement this teaching via suitable solutions known in the art.” Pet. 13 (noting that Cable teaches a build platform that can be heated “by any suitable heating elements” (citing 1006 ¶ 45)). The current record also indicates that Naware taught known options in this regard, e.g., where it describes a build plate to be used in a 3D printing process that includes contact plates and temperature control modules. See, e.g., Ex. 1007, code (57). Petitioner additionally argues that there is a reasonable expectation of success in combining Cable with Naware because “3D printers with temperature-controlled heated build plates were well-known technologies at the time of the ’660 patent in 2014, and these technologies had been successfully demonstrated in the real-world by then.” Pet 15 (citing various portions of Ex. 1003). Patent Owner does not contest Petitioner’s arguments with respect to a reasonable expectation of success in combining Cable with Naware. See generally Prelim. Resp. Based on our review and consideration of the current record, we are persuaded that Petitioner has sufficiently shown for the teachings of Cable and Naware in the manner argued by Petitioner.” slip op. at 23
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner “does not contest Petitioner’s description of a person of ordinary skill in the art (a ‘POSITA’) having a bachelor’s degree in Mechanical Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 37. Patent Owner does not address the specific knowledge that Petitioner contends that ordinarily skilled artisan would possess. Id. For purposes of this decision, we adopt Petitioner’s unopposed definition of the level of ordinary skill in the art as it appears consistent with the disclosures of the ’660 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 18
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,592,660 - PTAB · May 19, 2025 · IPR2025-00032 · APJ Mitchell G Weatherly · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood that claims 1, 10, 19, and 28 are obvious.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“At least because of the material differences in Ferro compared to Hafner ’174 and the reliance on Donnelly and Letendre, which were not before the Office, we find that the same or substantially the same art was not previously presented to the Office.” slip op. at 12
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record,1 we conclude that Petitioner is reasonably likely to prevail with respect to at least one of the challenged claims.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“We disagree with Patent Owner. It is true that Oyobe focuses on alerting a vehicle user to a low state of charge by raising a physical indicator on the exterior of the vehicle (i.e., the “informing apparatus 102) when the battery is low. Ex. 1005 ¶ 40. Oyobe explains: even in such a case where the vehicle user exit from the vehicle without checking the SOC of main battery B on the console panel, informing apparatus 102 disposed at a location where it can easily be seen outside the vehicle by the vehicle user allows the vehicle user to easily recognize the necessity of charging main battery B. Id. However, Oyobe’s focus on raising a physical indicator on the vehicle as a reminder does not detract from Oyobe’s unambiguous disclosure that its vehicle also includes position detecting apparatus 108 that uses wireless communication to “sense that the vehicle is parked at the location where charging equipment is installed.” Id. ¶ 142. Oyobe’s ability to sense whether a vehicle is parked next to a charger allows Oyobe’s system to remind the user to charge the battery by raising low battery indicator 102 while the vehicle is located next to a charger but not “where charging cannot be performed.” Id. ¶¶ 143–145. Accordingly, regardless of the reason that Oyobe provides for including its vehicle position detecting apparatus, Oyobe undeniably describes a vehicle sensor that can provide “information indicative of a presence of an electric vehicle in a parking space” near a charging station. And, we find that Petitioner has sufficiently explained why an ordinarily skilled artisan would have been motivated to use Oyobe’s sensor in Ferro’s electric vehicle to “advantageously allows a user to instruct charging without exiting the vehicle and physically interacting with a charging station.” Pet. 11–12 (citing Ex. 1003 ¶¶ 150–152).” slip op. at 20
- Strike new argumentNew argument consideredDecided for petitioner
“Third, Patent Owner argues that Petitioner violates Rule 42.6(a)(3) by improperly incorporating arguments from Mr. Andrews’s Declaration into the Petition to establish that Oyobe teaches sensing the presence of a vehicle in a “parking space” as recited in limitation 1e. Prelim. Resp. 42–43 (citing Pet. 19–20 (citing Ex. 1003 ¶¶ 178–181)). Patent Owner contends that Mr. Andrews’s citation of four references that are not expressly cited in the Petition, Exhibits 1018, 1053, 1057, and 1059, implicitly demonstrates that the Petition incorporates arguments by reference. Id. Not only do we find Petitioner’s reliance on Mr. Andrews’s testimony to be persuasive, but we also find that Mr. Andrews’s citations to Exhibits 1018, 1053, 1057, and 1059 provide strong support for his testimony that an ordinarily skilled artisan would understand that Oyobe teaches that its vehicle is in a parking space when Oyobe’s apparatus 108 detects that “the vehicle is parked” near charging equipment. Far from improperly incorporating arguments by reference, we find Mr. Andrews’s citation to objective evidence to support his opinions on how an ordinarily skilled artisan would read Oyobe’s disclosure to be preferred and highly persuasive.” slip op. at 21
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 11,563,338 - Uatp IP LLC v. Slick Slide LLCInstitutedPTAB · Apr 8, 2025 · PGR2024-00054 · APJ Julia Heaney · PGR · Institution
The Board instituted PGR on claims 1–17 and 22–28 and all asserted grounds, finding a sufficient likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of a post-grant review is authorized by statute when “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a) (2018). Upon consideration of the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated that it is more likely than not that at least one claim challenged in the Petition is unpatentable. Further, Patent Owner has not persuaded us that it is appropriate to exercise our discretion not to institute review. Accordingly, we institute a post-grant review of all claims and all grounds asserted in the Petition.1” slip op. at 2
- Skill levelSkill level patent owner adoptedOther
“On this record, we do not find Patent Owner’s proposed experience level of at least five years in measurement and analysis of coefficient of friction to be supported. As to the necessity of experience in textile engineering and fiber science, Patent Owner’s position, although not supported by declarant analysis of the factors listed above, is consistent with the disclosure of the ’854 patent, which describes features of a mesh layer in textile and fiber terms. See e.g., Ex. 1001, 10:17–11:14, 12:65–13:8, 14:20–24. On the whole, however, we do not discern on this record how specific experience in textile engineering and fiber science of a person of ordinary skill would materially alter the outcome at this stage of the proceeding. For purposes of this decision only, we apply Patent Owner’s proposed definition of a person of ordinary skill in the art, except for the requirement of five years of experience in measurement and analysis of coefficient of friction. The level of skill in the art remains an open issue in this proceeding. Further submissions by the parties may include argument and evidence that would assist in the resolution of this issue at the close of trial.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner contends “no formal claim construction is necessary in this proceeding.” Pet. 10; Reply 1, 4. Patent Owner contends the terms “mesh layer” and “coefficient of friction” require construction. Prelim. Resp. 14–16; Sur-reply 2–5. We have considered the parties’ arguments and discuss them below with regard to each of the terms Patent Owner contends should be construed. Because our determination that Petitioner demonstrates at least one challenged claim meets the threshold for institution (see SAS Inst., 138 S. Ct. at 1359–60) is not based on construing the term “mesh layer” or “coefficient of friction,” we determine we need not construe either claim term at this stage of the proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). As further discussed below, we invite the parties to address claim construction at trial.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“We agree with Petitioner that the ’854 patent specification does not include clear and explicit lexicography or a disclaimer that would support requiring “coefficient of friction” to be determined by a specific ASTM test method. The portion of the specification Patent Owner asserts as a definition of “coefficient of friction” (see Ex. 1001, 11:31–42) is a description of an embodiment; we find it does not express patentee intent to redefine the term. Further, the statement that “the coefficient of friction … may be determined using the … ASTM D1894 standard test method” (id. at 11:32–35) indicates that use of that specific test method is optional. Accordingly, in the absence of patentee lexicography or disavowal, we do not limit the scope of the term “coefficient of friction” to require that it be measured by a specific ASTM standard. Luminara Worldwide, LLC v. Liown Elecs. Co., 814 F.3d 1343, 1353 (Fed. Cir. 2016) (“Absent lexicography or disavowal, we do not depart from the plain meaning of the claims.”); In re Am. Acad. Of Sci. Tech Ctr., 367 F.3d 1359, 1369 (Fed. Cir. 2004) (“We have cautioned against reading limitations into a claim from the preferred embodiment described in the specification, even if it is the only embodiment described, absent clear disclaimer in the specification.”). We note that the ’854 patent specification sets forth a definition for the coefficient of friction between the surfaces of the mesh material and the slide surface. Ex. 1001, 4:38–46. As stated above, however, we do not expressly construe any claim term at this stage of the proceeding. Should the parties address the construction of “coefficient of friction” at trial, we will make a determination after the close of evidence and any hearing.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialcites KSR · GrahamPatents in suitUS 11,998,854
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.