- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Altria Client Services LLC v. Yiwu Jingangke Trading Co., Ltd.Adverse judgmentPTAB · Oct 1, 2026 · PGR2026-00035 · APJ Robert L Kinder · PGR · Adverse judgment
The Board entered adverse judgment against Patent Owner for abandoning the contest and canceled the sole challenged claim.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“Pursuant to our rules, “[a]ctions construed to be a request for adverse judgment include . . . [a]bandonment of the contest.” 37 C.F.R. § 42.73(b)(4). Our prior order warned that a failure to respond would be construed as an abandonment of the contest under 37 C.F.R. § 42.73(b)(4), and that entry of judgment adverse to Patent Owner and cancellation of the challenged claim may follow. Show Cause Order, 2. Because Patent Owner did not respond by the September 15, 2026, deadline and has not entered an appearance in this proceeding, we determine that Patent Owner has abandoned the contest. Under these circumstances, we enter judgment adverse to the Patent Owner and cancel the challenged design claim.” slip op. at 2
None - Tesla, Inc. v. Charge Fusion Technologies, LLCAll claims unpatentablePTAB · Jul 13, 2026 · IPR2025-00153 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“understanding of one of ordinary skill in the art at the time of the invention. Tesla submits that one of ordinary skill in the art would have had at least a bachelor’s degree in electrical or mechanical engineering (or an equivalent field) and at least two years of work experience involving automotive systems, including electric vehicle power management. . . . Additional industry 1 US 2009/0313034 A1, pub. Dec. 17, 2009 (Ex. 1004, “Ferro”). 2 EP 1,920,968 A1, pub. May 14, 2008 (Ex. 1005, “Oyobe”). 3 US 7,124,691 B2, iss. Oct. 24, 2006 (Ex. 1006, “Donnelly”). 4 Steven E. Letendre, The V2G Concept: A New Model for Power? PUBLIC UTILITIES FORTNIGHTLY, Feb. 15, 2002, at 16 (Ex. 1007, “Letendre”). 5 US 5,654,621, iss. Aug. 5, 1997 (Ex. 1078, “Seelig”). 6 US 6,662,083 B1, iss. Sep. 16, 2003 (Ex. 1010, “Knockeart”). experience or technical training may offset less formal education, while advanced degrees or additional formal education may offset lesser levels of industry experience. Pet. 2 (citing Ex. 1003 ¶¶ 14–15). Charge Fusion “takes no position with respect to Petitioner’s proposed level of ordinary skill.” PO Resp. 17. For purposes of our analysis, we apply Tesla’s proposed level of ordinary skill, which we find to be consistent with the problems addressed in the ’987 patent and the prior art. B. Claim Interpretation” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“1. “dynamic attribute of an electric charge provider” In the Petition, Tesla proposes that we construe “dynamic attribute of an electric charge provider,” as recited in every independent claim, to mean “a changing or otherwise fluctuating cost (or price) of electricity for purchase from an electric charge provider.” Pet. 4–5. Charge Fusion responds that Tesla improperly narrows the meaning of this claim limitation. PO Resp. 15 (arguing this claim term “is not just limited to ‘changing or otherwise fluctuating cost (or price)’ as alleged by the Petition” (emphasis added)). Although we consider Tesla’s proposed construction to identify an exemplary “dynamic attribute of an electric charge provider,” we see no need to limit the meaning of this limitation as proposed by Tesla. Indeed, Tesla agrees. See Pet. Reply. 7 (arguing only that this claim limitation “at least includes” such an example). And Charge Fusion does not contend otherwise. See PO Resp 15 (arguing only that this limitation “is not just limited to” cost fluctuations). As such, we see no need to further construe this claim limitation. 2. “determine . . . a charging schedule for the vehicle” Limitation 1[g] recites “determine, based at least on the one or more charging preferences and at least one current value of a dynamic attribute of an electric charge provider, a charging schedule for the vehicle.” Independent claim 8, 15, and 22 recite a materially identical limitation. Tesla submits that this limitation should not be construed as a means-plus- function limitation under 35 U.S.C. § 112(6). See Pet. 5. Charge Fusion agrees that “nothing in the claim invokes [§] 112(6).” PO Resp. 16. As such, we discern no dispute regarding the meaning of this claim limitation.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“Initially, we note that, as claimed, there is no express restriction on the manner in which the “amount” or “charge” is specified or otherwise expressed. Indeed, the Specification uses both “desired charge percent level” and “desired charge range level” as alternative ways for a user to specify an “amount of charge.” Ex. 1001, 14:53–15:8 (emphases added). The Specification defines “desired charge range level” as meaning “a desired distance to travel.” Id. at 15:3–8. Elsewhere, the Specification describes that a user may specify the amount of charge as follows: “the user may indicate a desired charging level (and/or a desired charging level may be automatically calculated) based on a desired distance of travel.” Id. at 19:49–57 (emphasis added). More specifically, annotated Figure 7 of the ’987 patent, reproduced below, demonstrates how a user may select “amount of charge” in terms of a desired mileage range 720 or a percentage level 718. See Pet. Reply 2. As shown in red, annotated Figure 7 illustrates that a user selects “desired charge level 720” on “vehicle charge indicator 714” by moving a slider to a value specified in “miles” (e.g., 110 miles). The Specification, after discussing selecting a desired charge percent level 718, explains: The user may also or alternatively view and/or change the desired charge range level 720. An estimate of how far the vehicle can travel on a given charge amount (which may be a general average and/or may be computed based on a specific itinerary and/or past driving habits) can be determined, for example, and utilized to express the desired charge level in terms of distance capable of being traveled. In such a manner, for example, a user may determine a desired distance to travel (e.g., how far it is from home to work or vice versa) and may set the desired charge range level 720 to match the desired distance. Ex. 1001, 14:65–15:8. Thus, the Specification confirms that “amount of charge” may be expressed in terms of a desired mileage as well as a desired percentage level.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner
“We disagree. Charge Fusion’s reliance on Wonderland is misplaced and does not support the proposition for which it is cited. In Wonderland, the district court denied the accused infringer’s motion for summary judgment of invalidity, in part, because genuine issues of material fact existed as to whether there was sufficient motivation to combine the prior art. Wonderland, 988 F. Supp. 2d at 511. As such, the district court’s Wonderland decision does not constitute a final ruling on the motivation to combine issue, and the Federal Circuit’s summary affirmance of the district court’s ruling neither addresses the issue nor reflects how the issue was resolved at trial. See Wonderland NurseryGoods Co. v. Thorley Indus., LLC, 644 F. App’x 1011 (Fed. Cir. 2016). Moreover, contrary to Charge Fusion’s assertion, Tesla correctly notes that although Ferro refers to wireless charging, it provides no implementation details. Ex. 1004 ¶ 36; Ex. 2006, 54:8–55:9. Nonetheless, Ferro does describe manual options for initiating charging, and Tesla’s expert credibly testifies that one of ordinary skill in the art would have been motivated to apply Oyobe’s vehicle sensor to allow a user to initiate Ferro’s charging methods more easily without having to leave the vehicle. See Ex. 1003 ¶¶ 146, 151, 152 (citing Ex. 1004 ¶ 109). Accordingly, we find that Tesla establishes that one of ordinary skill in the art would have been motivated to incorporate Oyobe’s use of a sensor to establish presence of a vehicle near a charging station into Ferro’s system.” slip op. at 17
Patent outcomesUS 11,631,987 unpatentableClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 11,631,987 - Tesla, Inc. v. Charge Fusion Technologies, LLCAll claims unpatentablePTAB · Jul 13, 2026 · IPR2025-00152 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–17 are unpatentable as obvious: claims 1–4, 6–9, and 11–14 over Sutardja, Donnelly, and Letendre; claims 5, 10, and 15 with Seelig; claims 16 and 17 with Knockeart.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“understanding of one of ordinary skill in the art at the time of the invention. Tesla submits that one of ordinary skill in the art would have had at least a bachelor’s degree in electrical or mechanical engineering (or an equivalent field) and at least two years of work experience involving automotive systems, including electric vehicle power management. . . . Additional industry experience or technical training may offset less formal education, 1 US 2008/0136371 A1, pub. Jun. 12, 2008 (Ex. 1011, “Sutardja”). 2 US 7,124,691 B2, iss. Oct. 24, 2006 (Ex. 1006, “Donnelly”). 3 Steven E. Letendre, The V2G Concept: A New Model for Power? PUBLIC UTILITIES FORTNIGHTLY, Feb. 15, 2002, at 16 (Ex. 1007, “Letendre”). 4 US 5,654,621, iss. Aug. 5, 1997 (Ex. 1078, “Seelig”). 5 US 6,622,083 B1, iss. Sep. 16, 2003 (Ex. 1010, “Knockeart”). while advanced degrees or additional formal education may offset lesser levels of industry experience. Pet. 2–3 (citing Ex. 1003 ¶ 29). Charge Fusion “takes no position with respect to Petitioner’s proposed level of ordinary skill in the art.” PO Resp. 9. For purposes of our analysis, we apply Tesla’s proposed level of ordinary skill, which we find to be consistent with the problems addressed in the ’788 patent and the prior art. B. Claim Interpretation” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“shown in Figure 7 of the ’788 patent. Pet. 4–5. Charge Fusion responds that Tesla’s proposed construction should be rejected because it “wrongly import[s] embodiments from the specification.” PO Resp. 14–16. We discern no dispute over the meaning of “unitary vehicle charge indicator” because, contrary to what Charge Fusion argues, Tesla does not contend that this limitation is “required to be limited to” the bar graph embodiment of Figure 7, only that it “at least includes” that embodiment. Compare Pet. 5, with PO Resp. 14–16. Tesla also argues that the “first” and “second” portions of the unitary vehicle charge indicator—which indicate the charged and uncharged capacities of the battery—recite merely “communicative content,” and thus, are “not entitled to any patentable weight” because they are directed to nonfunctional printed matter. Pet. 5–7 (citing various case law). At the same time, however, Tesla maintains that “[r]egardless, Donnelly teaches a bar graph indicating the amount of charge and uncharged capacity.” Pet. Reply 11–12 (citing Pet. 33–34); see also Hrg. Tr. 74:22–25, 75:9–11. For reasons expressed below, we agree that Tesla persuasively demonstrates that the asserted combination teaches the “unitary vehicle charge indicator element” as claimed and construed by Charge Fusion. Accordingly, we need not decide the printed matter issue.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Initially, we note that, as claimed, there is no express restriction on the manner in which the “amount” or “charge” is specified or otherwise expressed. Indeed, the Specification uses both “desired charge percent level” and “desired charge range level” as alternative ways for a user to specify an “amount of charge.” Ex. 1001, 14:63–15:18 (emphases added). In particular, the Specification defines “desired charge range level” as meaning “a desired distance to travel.” Id. at 15:8–18. Elsewhere, the Specification describes that a user may specify the amount of charge as follows: “the user may indicate a desired charging level (and/or a desired charging level may be automatically calculated) based on a desired distance of travel.” Id. at 19:59–67 (emphasis added).” slip op. at 9
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“full charge” for the battery, and thus, Tesla fails to explain how the combination of Sutardja with Donnelly’s battery bar graph image “would allow a user to select a specific amount of charge or how this would result in a unitary vehicle charge indicator,” as claimed. PO Resp. 30. According to Charge Fusion, “[l]imiting the single option of ‘full charge’ as described in Sutardja would defeat the purpose of implementing a slider” as taught by Donnelly. Id. (citing Ex. 2008 ¶ 72). We disagree. Charge Fusion’s argument rests on the mistaken premise that Sutardja only contemplates selecting a full amount of charge for the battery and not an amount below a full charge, i.e., a partial charge. But that is not what Sutardja says. More accurately, Sutardja teaches that the user specifies the amount of charge—"The user interface module 108 may comprise a key pad, a display, a microphone, and/or a speaker (all not shown). A user of the vehicle 102-1 may use the user interface module 108 to set charging parameters for charging the battery 14.” Ex. 1011 ¶ 243. Elsewhere, Sutardja teaches that the user may set a “predetermined level” of charge— The charge monitoring module 150 may inform the control module 112 when the battery 14 is charged to a predetermined level (e.g., full charge) that may be indicated in the charging parameters. Subsequently, the charge monitoring module 150 may stop charging the battery 14 by deactivating the converter 156 and the charging module 152. The power meter 24 may measure the amount of power received from the utility company 23 during the charging operation. Id. ¶ 270 (emphases added). Although that passage indicates that a “full charge” is an example of a “predetermined level” of charge, nowhere does it exclude the selection of a lesser amount. Indeed, the passage contemplates the ability to “stop charging the battery,” which indicates that selection of the predetermined level may be less than a full charge. Id. Thus, we are not persuaded by Charge Fusion’s argument to the contrary. Rather, in our view, Tesla demonstrates by a preponderance of the evidence that the Sutardja-Donnelly combination teaches a “unitary vehicle charge indicator” that includes at least “first” and “second” portions and that one of ordinary skill in the art would have had reason to successfully combine their respective teachings in a manner that allows a user to predetermine, i.e., specify, an amount of charge. slip op. at 17
Patent outcomesUS 11,990,788 unpatentableClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 11,990,788 - Klipsta Pty Ltd v. Lindsay AlbaneseSome claims unpatentablePTAB · Jul 10, 2026 · IPR2025-00346 · APJ Annette R Reimers · IPR · Final written decision
Claim 16 is unpatentable as obvious over the asserted grounds; claims 1–15, 17, and 18 were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). Petitioner contends that a person having ordinary skill in the art at the time of the invention (“POSITA”) “would be a regular consumer/shopper with a rudimentary knowledge of the use of magnetic clips and a basic understanding of clip construction.” Pet. 13. We find that the ’047 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of skill reflected in these references and in the ’047 patent is consistent with the definition of a person of ordinary skill in the art proposed by Petitioner. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10
- BurdenMixed
“Petitioner’s mapping of the components of KR ’458’s fastening device is insufficient. Although Petitioner maps the center line of fastening member 115 to the recited second end, Petitioner fails to adequately map the recited first end of the second strap or explain why one of skill in the art would consider the second ferromagnetic member (convex member 117) to be disposed at the first end of the second strap as required by claim 1. that the first end is “upward to connector 117.” Pet. 24. This is not the end of the second strap. As discussed above, the end of the second strap wraps around rectangular ring 210 and is then secured to itself.7 Connector 117 is positioned below the true end of the strap, more in the middle of this segment of the strap. In other words, Petitioner arbitrarily defines the strap as only the portion of hat holder 110 between the center line and connector 117, in contradiction to what KR ’458 actually discloses. Nowhere does Petitioner explain why connector 117 is disposed at the first end of the second strap. Neither does Petitioner explain why we should disregard the true end of the strap, nor why one of skill in the art would consider only a middle portion of the strap to be the second strap. Thus, Petitioner has not satisfied its burden in this regard. Therefore, Petitioner has not shown that KR ’458 discloses “a second strap having a first end and a second end, the second strap joined to the first strap,” with “a second ferromagnetic member disposed at the first end of the second strap.” For the foregoing reasons, we determine that a preponderance of the evidence does not support that claim 1 is anticipated by KR ’458.” slip op. at 23
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner
“The ’047 patent discloses that in addition to being separate straps, the rear strap and the front strap “can be formed from a single piece of material.” Ex. 1001, 3:40–44, 5:24–32, 10:18–25. In particular, Figures 5A–5B of the ’047 patent illustrate rear strap 510 and front strap 520 as being “formed from a single piece of material that is folded approximately in half where a first half can be the rear strap 510 and a second half can be the front strap 520.” Id. at 10:18–21, Figs. 5A–5B. Indeed, Patent Owner acknowledges “[i]t should be noted that forming the first and second straps from a single piece of material is well within the scope of the claimed invention.” Ex. 1007, 5 (citing the ’047 patent at 3:37–44). Moreover, we note the positions taken by the parties are consistent with the fact that claim second strap are formed from a single folded strap.” Ex. 1001, 14:47–48. We, therefore, adopt Petitioner’s construction of “the second strap joined to the first strap” to include “a single piece of material.”” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for patent owner
“Petitioner’s construction of a “hook” to include a “structure that serves to attach the hat holder to another object” is based on function, rather embodiments in the Specification of the ’047 patent. Although strap-style hook 340 of Figures 3A–3C is a flexible component rather than a more rigid component like hook 140 shown in Figures 1A–1C , both can be considered types of hooks. All of the embodiments, whether rigid or flexible, can be considered to have a hook-like structure when serving the function of attaching the hat holder to another object. Petitioner’s proposed construction would render the term “hook” meaningless, as various types of structures could be used to attach the hat holder to another object, that would not reasonably be considered to be a “hook.” For example, a snap, safety pin, ring, or button could be used to attach a hat holder to another object. Petitioner’s identification of different embodiments in the ’047 patent of hook-like structures does not show why one of skill in the art would consider almost any structure to be considered a “hook.” We, therefore, reject Petitioner’s construction of a “hook” as a “structure that serves to attach the hat holder to another object.” “wherein the first strap and the second strap are configured to retain a” slip op. at 12
Patent outcomesUS 10,413,047 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,413,047 - GD Energy Products, LLC v. Kerr Machine CompanyAll claims unpatentablePTAB · Jun 29, 2026 · PGR2025-00031 · APJ Ryan H Flax · PGR · Final written decision
Claims 1–14 are unpatentable as obvious under each of four asserted grounds: Kerr; Aplex and Stanton; Blume, Stanton, and Wilkinson; and the sale of the Kerr Pump.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The person of ordinary skill in the art would have a minimum of a bachelor’s degree in mechanical or petrochemical engineering, or a comparable engineering discipline, and a minimum of 3-5 years of work experience in the design and/or manufacturing of reciprocating pumps and valves, including fluid ends and/or comparable high pressure fluid components, for industrial applications, including for use in the oil and gas industry. See, e.g., EX1003, ¶32.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We decline to expressly construe any claim language. slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“Regarding the combining of Aplex and Stanton, Petitioner asserts that the ordinarily skilled artisan would have understood that providing a packing/stuffing arrangement, as taught by Stanton, within a fluid end housing, as taught by Aplex, would improve pressure and fluid isolation compared with an arrangement where the packing was bolted to the outside of the fluid end as in Aplex unmodified. Pet. 66 (citing Ex. 1003 ¶¶ 189, 236). Patent Owner does not dispute this rationale. We find this to be a reason, with rationale underpinning, why the person of ordinary skill in the art would have combined these references with a reasonable expectation of success.” slip op. at 29
- Adverse judgmentOther
“The record indicates that Patent Owner has statutorily disclaimed claim 15 as of April 28, 2025. Ex. 2206.” slip op. at 8
Patent outcomesUS 12,152,582 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 12,152,582 - Tesla, Inc. v. Charge Fusion Technologies, LLCAll claims unpatentablePTAB · May 13, 2026 · IPR2025-00032 · APJ Mitchell G Weatherly · IPR · Final written decision
Claims 1–29 are unpatentable as obvious under §103 based on the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“understanding of a person of ordinary skill in the art at the time of the invention. Graham, 383 U.S. at 17. Petitioner submits that the ordinarily skilled artisan would have at least a bachelor’s degree in electrical or mechanical engineering (or an equivalent field) and at least two years of work experience involving automotive systems, including electric vehicle power management. . . . Additional industry experience or technical training may offset less formal education, while advanced degrees or additional formal education may offset lesser levels of industry experience. Pet. 2 (citing Ex. 1003 ¶¶ 30–32). Patent Owner “takes no position with respect to Petitioner’s proposed level of ordinary skill.” PO Resp. 17. For the purposes of our analysis below, we apply Petitioner’s proposed level of ordinary skill, which we find to be consistent with the problems addressed in the ’338 patent and the prior art.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Initially, we note that “amount of charge” reflects no express limitation on the manner of expressing the “amount” or the “charge.” And the Specification uses both “desired charge percent level” and “desired charge range level” as alternative ways for a user may specify an “amount of 3 As recited in independent claims 10, 19, and 28 charge.” For example, the Specification describes that a user may specify an amount of charge by specifying a desired travel distance as follows: “the user may indicate a desired charging level (and/or a desired charging level may be automatically calculated) based on a desired distance of travel.” Ex. 1001, 19:49–57 (emphasis added). Therefore, “amount of charge” may also refer to a desired mileage or range. Figure 7 further demonstrates that a user may select “amount of charge” in terms of a “percent” or a “range” as shown in Petitioner’s annotated version of the pertinent portion of that figure as shown below.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner
“We disagree with Patent Owner. First, Patent Owner’s reliance on Wonderland as announcing a rule having broad effect is misplaced. Patent Owner contends that the “Federal Circuit has confirmed that where the primary reference already includes the function of the secondary reference, an allegation to incorporate that function into the primary reference is improper hindsight and no motivation to combine exists.” Id. at 29 (citing Wonderland NurseryGoods Co. v. Thorley Indus., LLC, 988 F.Supp. 2d 479, 498–99 (W.D. Pa. 2013), aff'd, 644 F. App'x 1011 (Fed. Cir. 2016); citing Kinetic Concepts, Inc. v. Smith & Nephew, Inc., 688 F.3d 1342, 1368 (Fed.Cir.2012))). Patent Owner’s citation to Wonderland does not support the proposition for which it is cited, namely that the Federal Circuit has “confirmed” that incorporating a function from a secondary reference into a primary reference is “improper hindsight” that precludes a motivation to combine teachings from the primary and secondary references. In Wonderland, the district court denied an accused infringer’s motion for summary judgment of invalidity, in part, due to its finding that genuine issues of material fact existed for the issue of whether sufficient motivation to combine prior art existed. Wonderland, 988 F. Supp. 2d at 511. The Wonderland decision does not constitute a final ruling on that issue, and the Federal Circuit’s summary affirmance of the final ruling by the district court does not address the issue or reflect how the issue was resolved at trial. Wonderland NurseryGoods Co. v. Thorley Indus., LLC, 644 F. App’x 1011 (Fed. Cir. 2016). Second, Petitioner also correctly points out that although Ferro refers to wireless charging, it provides no implementation details. Ex. 1004 ¶ 36; Ex. 2003, 54:8–55:9. Ferro also describes manual options for initiating charging, Ex. 1003¶ 146 (citing Ex. 1004 ¶ 109), and that an ordinarily skilled artisan would have been motivated to apply Oyobe’s vehicle sensor to allow a user to initiate Ferro’s charging methods more easily without the user having to leave the vehicle, Ex. 1003 ¶¶ 151, 152. Accordingly, we find that Petitioner has established that an ordinarily skilled artisan would have been motivated to incorporate Oyobe’s use of a sensor to establish presence of a vehicle near a charging station into Ferro’s system.” slip op. at 20
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“The test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference. . . . Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art.” MCM Portfolio LLC v. Hewlett-Packard Co., 812 F.3d 1284, 1294 (Fed. Cir. 2015). Patent Owner’s argument fails to account for the level of skill and creativity of an ordinarily skilled artisan, who would have possessed a bachelor’s degree in engineering and could have easily accounted for the differences in scale depicted by Letendre’s and Donnelly’s controls. Ex. 1003 ¶¶ 247–249. Accordingly, we find that Petitioner’s showing on the motivation to combine teachings of Ferro, Donnelly, and Letendre to arrive at limitation 1h is persuasive. slip op. at 30
Patent outcomesUS 11,563,338 unpatentableClaim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,563,338 - Penumbra, Inc. v. Rapidpulse, Inc.No claims unpatentablePTAB · Feb 17, 2026 · IPR2024-01261 · APJ Jamie T Wisz · IPR · Final written decision
Claims 1–20 were not shown unpatentable because the asserted combinations did not teach the claimed predetermined cycle for controlling distal fluid flow.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“(1) a person with a B.S. in engineering or an equivalent field, with two-four years of academic or industry experience in aspiration embolectomy and thrombectomy or comparable industry experience who would, where appropriate, work or consult with others, including a physician, to develop embolectomy or thrombectomy devices; or (2) an interventional neurosurgeon with at least three years of experience developing and/or using medical devices in embolectomy or thrombectomy procedures, and who would, where appropriate, work or consult with others, including an engineer, to develop such a medical device. Pet. 11 (citing Ex. 1005 ¶ 48). Petitioner also contends that, “[a] person with less education but more relevant practical experience, or more relevant education but less practical experience, may also meet this standard.” Id. Patent Owner states that for purposes of its PO Response, it “accepts ¶ 44). We adopt Petitioner’s characterization because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’402 patent and the cited prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“specification explicitly includes sensors similar to those in the prior art in support of their argument that the claimed “predetermined cycle” must not exclude the use of such sensors. Pet. Reply 15 (citing Ex. 1001, 32:55–33:7, 40:66–41:5, 44:9–29). We reviewed the portions of the specification cited by Petitioner. We agree with Patent Owner that one excerpt discussing sensor use appears to be directed to triggering the predetermined cycle rather than causing timing changes during the cycle itself (Ex. 1001, 32:55–66) (describing use of a pressure sensor to “determine when the vacuum channel 3 is clogged by a thrombus and automatically perform the unclogging procedures described herein”), while another excerpt discusses a sensor that Petitioner that the ’402 patent discusses the use of sensors to “tune” the system and that such “tuning” can be done statically (setting the cycle timing in advance) or dynamically (adjusting the timing during the cycle itself). See Ex. 1001, 48:19–49:50. Overall, we find that these disclosures involving sensors demonstrate that sensors may be used in various ways in different embodiments. However, none of these disclosures explicitly discuss the use of sensors in conjunction with a “pre-determined cycle.” Therefore, we find that the ’402 patent specification’s discussion of “sensors” are not particularly informative as to the appropriate construction of a “predetermined cycle” and do not outweigh the other explicit disclosures of “predetermined cycle” in the patent. We next turn to the other intrinsic evidence discussed by the parties — the prosecution history. As discussed by Patent Owner, in the Notice of Allowance, the Examiner found that Garrison did not teach or suggest a “predetermined cycle” because Garrison’s controller “changed the cycle of opening and closing the valves based on feedback from sensors.” Ex. 1004, 86. We acknowledge that the patent applicant filed subsequent comments during prosecution in which they stated that they “do[] not concede that the Examiner’s characterizations of the terms of the claims and the prior art are correct.” Id. at 29. However, we agree with Patent Owner that the importance of the Examiner’s statement in the Notice of Allowance does not rely on it being an express disclaimer (a standard which it does not meet). PO Sur-reply 8. We also considered Petitioner’s contention that the Examiner’s interpretation of Garrison may have been in error (PO Resp. 16); however, even if this were true, the Examiner’s statement still provides helpful insight into how the Examiner was interpreting the term sensors to change the opening and closing of valves during a cycle was not a “predetermined cycle.” Id. at 86. In sum, we find that Patent Owner’s proposed construction is consistent with the usage of the term “predetermined cycle” in the ’402 patent specification and prosecution history. Thus, after considering all of the cited evidence, we construe “predetermined cycle” to mean that “the timing of the sequence of valve operations in the cycle is determined beforehand, i.e., fixed, rather than varying based on feedback after operation begins.”” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“2. Other Terms The parties also provided proposed constructions for the limitations of “[limited/limiting] to a positive amount of exit flow” and “control[ling] fluid flow in and out from the distal end of the catheter.” See Pet. 15–16; Pet. Reply 1–8; PO Resp. 22–24; PO Sur-Reply 2–6. However, having evaluated the arguments and evidence before us, we determine that construction of these terms is not necessary for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable
“We agree with Patent Owner that neither Petitioner nor Mr. Brown propose any combination of Yang and Mullins that does not include Mullins’s pressure sensor in order “to control fluid flow in and out from the distal end of the catheter.” Indeed, in addressing the “predetermined cycle” limitation, Mr. Brown contends that Mullins discloses a “cycling controller that ‘varies aspiration pressure according to sensed pressure within the catheter lumen.’” Ex.1005 ¶¶ 131–32 (citing, e.g., Ex.1008, 27:40–28:20 (“[a] novel aspect of this pump system is the incorporation of feedback into the pump algorithm in order to produce more effective pressure cycling”)). This use of a sensor to change pressure during a cycle, is not a “predetermined cycle” under our construction. combinations is its discussion of distal end flow control, not for its sensors.” Pet. Reply 17 (citing Ex. 1035 ¶ 83). However, Petitioner’s obviousness grounds rely on the combination of Yang and Mullins, especially with regard to Mullins’s disclosure of “a controller” in order “to control fluid flow in and out.” As discussed above, Mullins relies on the sensor-feedback approach in order to control flow and we find that Petitioner has not presented persuasive evidence of how the combined disclosures of Yang and Mullins would control flow without using Mullins’s sensor feedback approach. See W.L. Gore & Assocs., Inc. v. Garlock, Inc., 721 F.2d 1540, 1550 (Fed. Cir. 1983) (error to “consider[] … references in less than their entireties, i.e., in disregarding disclosures in [them] … that diverge from and teach away from the invention”). Therefore, we determine that Petitioner has not sufficiently shown that the combination of Yang and Mullins discloses or renders obvious “a controller configured to open and close the vacuum valve and the vent valve in a predetermined cycle to change a level of vacuum at the distal end of the catheter and to control fluid flow in and out from the distal end of the catheter.” Accordingly, having considered the parties’ respective evidence and arguments, we find that Petitioner has not shown by a preponderance of the evidence that claim 1 of the ’402 patent would have been unpatentable as obvious over the combination of Yang and Mullins.” slip op. at 27
Patent outcomesUS 11,406,402 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,406,402 - Alpinestars S.P.A. / Alipinestars USA Inc. v. Dainese S.P.A.Rehearing deniedPTAB · Feb 9, 2026 · IPR2025-00750 · APJ Benjamin D M Wood · IPR · Rehearing
The Board denied rehearing, leaving institution denied because Petitioner did not show a reasonable likelihood of prevailing on claims 1–22 under the challenged obviousness grounds.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“Petitioner misstates the Decision’s reasoning. As is clear from the previous discussion, we determined that Petitioner’s articulated reasons for combining EP’536 with CN’180 lacked a rational underpinning, not because “EP’536 does not relate to ‘air bags,’” but because the means by which EP’536’s device inflates differs fundamentally from that of CN’180’s device. Dec. 17–18. Petitioner did not acknowledge this critical difference in the Petition, and continues not to do so in its Rehearing Request.” slip op. at 5
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“EP’536 with CN’180 lacked a rational underpinning because EP’536’s inflation mechanism differs fundamentally from CN’180’s inflation mechanism. Dec. 17–18. As we stated, whereas CN’180’s fall-protection belt uses an airbag that requires an external source of pressurized air to inflate, EP’536’s garment does not need an external inflation device because “the gas generating agent 18 in each envelope automatically generates gas and inflates the envelopes in response to rising temperatures.” Id. at 18 (citing Ex. 1004 ¶ 15; Ex. 1005 ¶¶ 5, 19). This difference reflects the fundamentally different purposes of the two devices: CN’180’s device is designed to provide “fall protection” to, e.g., “elderly people,” (Ex. 1005 ¶ 1, 3), whereas EP’536’s device provides “adaptive thermal insulation” for, e.g., garments worn by fire fighters. Ex. 1004 ¶¶ 1–3, 250. Because of the different means by which EP’536’s and CN’180’s devices inflate and the different purposes for doing so, we were not persuaded that one of ordinary skill in the art would have combined the references as Petitioner proposed. Dec. 18. We further noted that the modification would not have improved the reusability of EP’536’s device “by having only one mechanism to recharge,” because EP’536’s “gas generating agent does not need any ‘mechanism to recharge.’” Dec. 18. Instead, we noted EP’536’s teaching that its gas generating agent “automatically recombines or condenses in response to a temperature decrease to return the envelopes, and therefore the garment, to its original thickness, at which point the gas generating agent is ready for subsequent reactivation.” Id. (citing Ex. 1004 ¶¶ 139–141). Finally, we determined that replacing EP’536’s envelopes with CN’180’s airbag “would have made EP’536’s invention unsuitable for its intended purpose: providing a protective garment with ‘adaptive thermal insulation.’” Dec. 19. We stated that “Petitioner does not suggest, and we have found nothing in the record to establish, that CN’180’s airbag would provide this feature.” Id. at 20.” slip op. at 3
- Obviousness (§103) › KSR rationalesMotivation not foundNot shown unpatentable
“rationales for combining EP’536 and CN’180. Reh’g Req. 6–7. First, Petitioner asserts that we “improperly rejected Petitioner’s ‘simple substitution’ evidence in view of [the Board’s] incorrect conclusion that EP’536 does not disclose an ‘external source of inflation [EP’536’s dosing aids].’” Id. at 6 (citing Dec. 18–19). This argument is unpersuasive at least because, as we discussed above, EP’536’s dosing aids do not constitute an external source of inflation. Petitioner further argues that we incorrectly evaluated its “obvious to try” rationale because, contrary to our analysis, Petitioner did in fact identify a problem to be solved by its “finite number of solutions”: “simplify[ing] the design and reduc[ing] the number of required inflation mechanisms.” Id. at 6–7. The Petition’s entire “obvious to try” discussion is as follows: [A] POSITA would have found it obvious to try a one-piece airbag 10 with strip-shaped inflation units 12 in the EP’536- CN’180 airbag system because it would have been a selection from a finite number of identified predictable solutions (i.e., using one chamber with connected individual inflation units 12 versus multiple individual envelopes 20). 5 Petitioner also argues that dosing aids are “needed in order to make the disclosed device reusable.” Reh’g Req. 5–6. This is incorrect, as EP’536 conveys that the reusability of the device is a result of the gas generating agent condensing or recombining when temperatures fall. Ex. 1004 ¶¶ 139– 141. Even if it were true, however, it is unclear how it would support Petitioner’s argument. Pet. 16. As is evident, Petitioner did not identify a design need, market pressure, or other problem that would have been addressed by its identified “solutions,” and therefore we were not persuaded by this rationale. Dec. 19. Petitioner’s attempt to cure this deficiency in its Rehearing Request is tardy. We cannot misapprehend or overlook an assertion that Petitioner fails to make in the Petition. It is also insufficient. Petitioner does not provide any evidence of a known design need or market pressure to “simplify [EP’536’s] design” or reduce the number of “required inflation mechanism” it uses.” slip op. at 7
§ 103 obviousnessPatents in suitUS 12,012,065 - Solaris Oilfield Site Services Operating, LLC / Solaris Oilfield Site Services Personnel, LLC v. Masaba, Inc.All claims unpatentablePTAB · Jan 26, 2026 · IPR2024-01179 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–25 are unpatentable under § 103 over the asserted combinations of Waldner, Dynatek, and additional references; the Board cancelled all challenged claims.
RulingsFinal written decision- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Also, to the extent Masaba relies on extrinsic expert testimony, we note that Masaba’s expert cites absolutely no support for his understanding of the claims, much less explains why we should adopt his understanding over the plain and ordinary meaning of “conveying aggregate” and “moving aggregate.” See Ex. 2004 ¶ 34. Absent supporting citations, such extrinsic testimony is entitled to little, if any, weight. As such, we reject the notion that Waldner’s discharge chute member 242 is not a conveyor “for conveying aggregate” or “for moving aggregate,” as required by claim elements 1[h] and 1[i].” slip op. at 21
- Skill levelSkill level petitioner adoptedDecided for petitioner
“We disagree that Dr. Durham does not possess the necessary level of skill in the art to qualify as an expert in this case. Looking at the specification of the ’689 patent and the prior art of record, we think Masaba sets the bar too high. We acknowledge that one of ordinary skill in the art should have some education and/or experience in the mechanical art of conveying aggregate materials, but we do not think opining on the ’689 patent and asserted prior art necessarily requires that person to have the amount of education and experience that Masaba advocates. The ’689 patent relates generally to an “aggregate transferring system for receiving aggregate from a vehicle and elevating the aggregate to a higher vertical level for deposit into, for example, a silo.” Ex. 1001, 1:15– 18. And, as described in the ’689 patent and discussed later, the transferring system is an assembly of known types of conveyors, such as a belly-dump truck conveyor, a bucket elevator, and an articulated belt conveyor, for transferring the aggregate horizontally and vertically from a belly-dump truck to the discharge point, such as a silo. Without doubt, Dr. Durham has enough education and experience to reliably opine on the combination of known parts.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningNo construction needed
“We reject this argument for several reasons. First, nowhere does the plain language of the claims specify how the aggregate is conveyed or moved from the conveyor extension assembly’s inlet to its outlet, be it passively by means of gravity or actively by means of a conveyor belt. Instead, the claims simply use those verbs according to their plain and ordinary meaning, which is “to transfer or deliver” or “to cause to go or pass” from one place to another. See Ex. 3001, 253 (defining “convey”), 760 (defining “move”).10 Second, the specification of the ’689 patent similarly uses these terms in a plain and ordinary sense, without ever attributing to them some sort of special meaning. See, e.g., Ex. 1001, 4:9–12 (“The apparatus 10 is suitable for performing the transfer of aggregate from 10 We reference the original pagination of the dictionary in which these definitions appear. one location to another, such as, for example, from a vehicle carrying the aggregate to a silo 1 for storing the aggregate.”). The ’689 patent specification also makes clear that active conveyance of the aggregate is an option and not a requirement of the claimed invention, stating that the conveyor extension assembly “may further include a conveyor belt 150.” Ex. 1001, 10:60–66 (emphasis added). Limiting claim elements 1[h] and 1[i] to a device “for actively conveying” or “for actively moving aggregate” would improperly import limitations from the specification into the claims. Thus, based on the intrinsic evidence, we determine that claim elements 1h and 1k are properly construed to encompass passive and/or active movement of the aggregate via the conveyor extension assembly.” slip op. at 20
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)Not reached
“Owner asserts” that two claim terms—“unloader structure” and “trailer structure”—should be construed as means-plus-function limitations under 35 U.S.C. § 112(f), Solaris submits an express construction detailing the corresponding structure in the specification for performing the recited function of the claimed unloader and trailer structures. See id. at 24–25. Only in disputing Solaris’s Ground 3 does Masaba advocate that the claim term “trailer structure” should be construed under § 112(f), and then only in conjunction with dependent claims 3 and 21. See PO Resp. 58. As such, we address Masaba’s proposed construction in our analysis of Ground 3. We now turn to Solaris’s grounds of unpatentability.” slip op. at 12
Patent outcomesUS 11,780,689 unpatentableClaim construction§ 103 obviousnesscites KSRPatents in suitUS 11,780,689
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.