• Preomics GmbH / Biognosys AG. v. The Brigham And Women’S Hospital, Inc.Some claims unpatentable
  PTAB · Mar 23, 2026 · IPR2024-01473 · APJ Michael A Valek · IPR · Final written decision

  Claims 1, 4, 6, 17, 22, and 25 are unpatentable as anticipated by and obvious over Cai; claims 2, 3, 7, 23, and 24 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We disagree with Patent Owner and again find Petitioner’s description of the level of ordinary skill in the art sufficient for the reasons explained in the Decision on institution. See Dec. 8–10. As explained before, the formal training required by Petitioner’s description of a POSA includes understanding of both proteins and analytical techniques for studying them. See Dec. 9. Neither Patent Owner, nor its declarant, Dr. Cimas, clearly articulates a competing POSA description at trial, but both suggest more formal training, e.g., a graduate degree, is required. See Resp. 65–66; Ex. 2023 ¶ 8 (agreeing with our observation that the educational backgrounds of the inventors and authors of Cai, Zaccaria, and Hu “suggests that a graduate degree is more typical for a POSA”) (quoting Dec. 9, n. 5). Even if we were to accept that modification, it would not change our findings herein. Nor does it suggest that Dr. Vargas, who holds a Ph.D. in chemistry from Stanford University and has substantial experience with mass spectrometry and other analytical techniques, is unqualified to testify from the perspective of one of ordinary skill in the art. See Ex. 1004 (Vargas CV). Accordingly, our findings and conclusions would be the same, even assuming the perspective of a POSA possessing the higher level of formal training and specific proteomics experience that Patent Owner suggests is appropriate here.5” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner

    “Ex. 1001, 20:33–39. As Petitioner points out, the first sentence in this passage does not define the term “biological sample,” but rather the term “sample.” Id. According to that sentence, the term “sample” refers to either “a biological sample or a complex biological sample obtained from a subject.” Id. (emphasis added). Patent Owner’s argument assumes, without explanation, that the phrase “obtained from a subject” modifies both instances of “biological sample” in the first sentence. Id. But it need not be read that way. Indeed, that sentence is more naturally read to define “sample” as one of two things––either a “biological sample” or a “complex biological sample” with only the latter being “obtained from a subject.” Id. In addition, the second sentence in the passage above supports Petitioner’s view that the term “biological sample” is not limited to a sample obtained directly from a subject. It provides a broad, non-exhaustive list of “[s]uitable biological samples” that specifically includes the types of biological samples, i.e., “cell lysates,” “systemic blood,” “plasma,” assayed in Petitioner’s cited references. Ex. 1001, 20:36–39. It also lists as an example “processed tissue samples,” which would include samples that have been modified (i.e., “processed”) from the form in which they were originally obtained. Id.; see also Ex. 1001, 20:52–57 (describing tissue processing). Given this broad description, we agree with Petitioner that there is no basis in the cited intrinsic evidence for reading in the “negative limitations” Patent Owner seeks to try to distinguish the particular biological samples assayed in Cai, Hu, and Zaccaria. See Reply 3–4.” slip op. at 12

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “We agree with Petitioner. Step 1(a) recites forming coronas around a plurality of particles of “different particle types.” Ex. 1001, 86:53–60. Step 1(b) recites separating a “subset of the plurality of the particles comprising the coronas.” Id. at 86:61–65. As Petitioner correctly observes, as a matter of ordinary English parlance, “there is no requirement whatsoever that the ‘subset’ have all of the same characteristics as the set from which it is separated.” Reply 10. By way of analogy, consider a jar containing a plurality of coins of different coin types, e.g., nickels and dimes. One can separate out a “subset” of that plurality of coins (plural) by removing any two coins from the jar—this is true even if the two coins are both nickels or both dimes. In the same way, nothing in the ordinary meaning of the claim language requires the subset in step 1(b) to include particles with coronas representative of each of the different particle types in step 1(a). Nor has Patent Owner identified any other evidence that supports its attempt to read such a requirement into the claims. See Resp. 16, 18 (citing expert testimony that is not inconsistent with the broader, ordinary meaning of the claim language and, even if it was, would not be a proper basis for limiting the same). For these reasons, we reject Patent Owner’s interpretation of “a subset of the plurality of particles comprising the coronas” in step 1(b) as limited to a subset of each type of particle comprising the coronas formed in step 1(a).” slip op. at 15

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “We credit Petitioner’s showing above and agree that Cai discloses a method comprising all of the steps in claim 1. Beginning with step 1(a), Cai discloses contacting two different particle types, i.e., MWCNT and CB, with HeLa cell lysate (i.e., a biological sample) to form protein coronas around those particles. Ex. 1003 ¶¶ 199–206; Ex. 1005, Abstr. (describing MWCNT and CB as distinct “forms of carbon nanoparticles” that bind “vastly different sets of proteins”). Cai’s results show the coronas formed around the MWCNT and CB particles comprise overlapping and distinct proteins as recited in step 1(a). Ex. 1003 ¶¶ 216–222; Ex. 1005, 587 (“a small number of CB-binding proteins also bind to MWCNTs”). A subset of the proteins from the coronas on these particles is then prepared by eluting the bound proteins and analyzing them with SDS-PAGE in a MWCNT and CB “pull-down,” which reads on step 1(b). Ex. 1005, 586 (Fig. 1A–B depicting scheme for “pull-down experiment” and describing other “pull-down experiments” used with SILAC media in Fig. 3), 588 (Fig. 3). Regarding step 1(c), Cai discloses assaying the proteins in those subsets using LC-MS/MS with SILAC encoding to characterize and quantify the relative abundance of the proteins that bind to each type of particle.11 Ex. 1003 ¶¶ 225–229; Ex. 1005, 586–587 (describing “systemic characterization of carbon nanoparticle-protein corona”), 588 (Fig. 3). Cai’s results show “the relative abundance of the MWCNT-binding proteins spread over 8 orders of magnitude” and that “some of the proteins with the highest binding efficiencies” are actually “low abundance proteins” in the lysate, meaning that that Cai’s method selectively enriches such proteins for detection. Ex. 1005, 587. We credit Dr. Vargas’s testimony that these results demonstrate that Cai’s method achieves the “dynamic range” recited in step 1(c). Ex. 1003 ¶¶ 225–229.” slip op. at 23

  Patent outcomesUS 11,435,360 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,435,360
• Apple Inc. v. RJ Technology LLCSome claims unpatentable
  PTAB · Feb 18, 2025 · IPR2023-01350 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 5–10 are unpatentable as obvious; claims 11–14 were not shown unpatentable because the evidence did not establish the claimed capacity retention after 400 cycles.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends a person of ordinary skill in the art “would have held a Bachelor’s degree in chemistry or chemical engineering, with at least 4 years of experience in cell design, electrochemical techniques, and battery materials development.” Pet. 4. Petitioner further contends that a “Master’s Degree can substitute[] for some of the relevant experience,” and “[e]quivalent training with battery specific experience can accommodate other degreed fields.” Id. 9 The parties here do not address objective evidence of nonobviousness. Patent Owner does not dispute Petitioner’s definition of the ordinarily skilled artisan. PO Resp. 20. We adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the ’641 patent, the prior art of record, and the parties’ arguments.” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The parties agree that the term “charge cut-off voltage” is “the maximum voltage to which the battery is configured to be charged.” PO Resp 21–22; Pet. Reply 1. The parties dispute, however, whether the “charge cut-off voltage” is a “battery property” or “the voltage applied to the battery during charging.” PO Resp. 21–24; Pet. Reply 1–6. We need not resolve the precise meaning of “charge cut-off voltage” because there is no dispute that Yamaki discloses this limitation under either party’s interpretation of the claim term. Upon review of the prior art and the parties’ arguments, we determine that no terms of the ’641 patent require express construction. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))); Pet. Reply 1 (asserting that the challenged claims are unpatentable under either parties’ construction of “charge cut-off voltage”).” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “Patent Owner’s arguments do not persuasively undermine Petitioner’s position. Sakamoto expressly discloses setting the ratio of negative to positive electrode active material in the range of 1.05 to 1.30. Ex. 1005 ¶ 8. Sakamoto also explains why this range is preferable, i.e., if the ratio is roughly equal “the charge-discharge cycle performance is insufficient due to significant deterioration from charging and discharging,” and if the ratio is 10 Citations to the prosecution history of Yamaki are to the page numbers added to the lower right corner of the document. too high “too much of the compound does not participate in charging and discharging.” Id. ¶¶ 6, 8. These disclosures are sufficient to explain why one of ordinary skill in the art would have found it obvious to select the ratios disclosed in Sakamoto in Yamaki. Id. ¶ 8 (providing a secondary battery with a capacity ratio between 1.05 and 1.30 and noting that by setting the ratio within this range the resulting secondary lithium battery is “safe due to low risk of heat being generated and an explosion occurring”). We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 15

  Patent outcomesUS 7,749,641 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,749,641
• Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentable
  PTAB · Jan 17, 2025 · IPR2024-00597 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9–10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We also agree with Patent Owner that the charge cut-off voltage is not necessarily the applied voltage during charging. PO Resp. 20. Rather, depending on the charging protocol used and when in the charging cycle the voltage is applied, the applied voltage could be higher than the battery voltage. Ex. 2013; Ex. 2006 ¶ 91. For example, as discussed in more detail below with respect to the Uemura grounds, when fast charging using constant current is used and the charging rate is not slow, the applied voltage will be higher than the battery voltage when the constant current charging phase is stopped. Ex. 2006 ¶ 91; Ex. 2013. Likewise, during constant current/constant voltage charging, the applied voltage approximates the battery voltage only when the battery is nearly completely charged. Ex. 2013; Ex. 2006 ¶ 91. Thus, the applied voltage may be, but is not necessarily, the charge cut-off voltage. In view of the foregoing, we construe “charge cut-off voltage” in claims 1 and 5 as “the maximum value to which the battery is configured to be charged.” PO Resp. 18; Ex. 2008, 217:6–11; Pet. Reply 5. Contrary to Patent Owner’s arguments, however, we do not understand the phrase “configured to be charged” to necessarily represent a single voltage for the battery that is determined based on the structure and chemistry of the battery. Pet. Reply 4–5. Rather, the charge cut-off voltage is a selected potential, or voltage, of the battery or cell at the end of charging that is controlled by a circuit or device, such as a charger or control circuit within the battery. Ex. 1001, 9:50–55; Ex. 1048, 2, 7–8; Ex. 1008, 3:9–13. And, for the reasons discussed herein, the charge cut-off voltage may be, but is not necessarily, the same as the applied voltage during charging. PO Resp. 20.” slip op. at 15

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122.” slip op. at 21

  Patent outcomesUS 7,749,641 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,749,641
• Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentable
  PTAB · Jan 17, 2025 · IPR2023-01183 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9 and 10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “constructions. First, we agree with Petitioner that the ’641 patent indicates that the charge cut-off voltage selected for a particular battery need not be a fixed property of the battery or something that is set by the design and chemistry of the battery. Consistent with this conclusion, the ’641 patent discloses that a “charging device controls the charge cut-off voltage of the single lithium-ion cell within a range from 4.3 V to 5.8 V.” Ex. 1001, 9:50– 55. This strongly suggests that the charge cut-off voltage is controlled by the charger and is not necessarily an inherent property of the battery. Patent Owner contends that this is merely an unclaimed embodiment, but the relevant disclosure states that the charging device for the “present invention” may be any type of device “with the proviso that said charging device controls the charge cut-off voltage.” Id. at 9:50–53.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122. Petitioner argues that because the battery of Uemura is charged “to” a maximum voltage of 4.3 V, Uemura discloses the claimed charge cut-off voltage under either Petitioner’s or Patent Owner’s construction of the term. Pet. Reply 11–12 (citing Ex. 1009 ¶ 81; Ex. 1044 ¶¶ 56–59). This argument is not persuasive because Mr. Juzkow unambiguously testified that charging in Uemura stopped when the applied voltage reached 4.3 V, and Uemura discloses that the battery was charged “at” a voltage ranging from 4.3 V to 2.0 V, not “to” such a voltage. Ex. 1009 ¶ 81; Ex. 2008, 113:2–13; Ex. 2006 ¶ 119 n.64; Sur-reply 9. In view of the foregoing, we determine that Petitioner has not demonstrated by a preponderance of the evidence that Uemura anticipates independent claims 1 and 5 of the ’641 patent.” slip op. at 21

  Patent outcomesUS 7,749,641 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,749,641
• Fusion Orthopedics, LLC v. Extremity Medical, LLCSome claims unpatentable
  PTAB · Nov 4, 2024 · IPR2023-00894 · APJ Robert A Pollock · IPR · Final written decision

  Claims 1–10 and 12–15 are unpatentable; claim 11 was not shown unpatentable. Substitute claims 16–25 and 27–30 are unpatentable over Mazur; claim 26 was not reached.

  RulingsFinal written decision

  • BurdenMixed

    “It is of the utmost importance that petitioners in the IPR proceedings adhere to the requirement that the initial petition identify ‘with particularity’ the ‘evidence that supports the grounds for the challenge to each claim.’” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369 (Fed. Cir. 2016) (quoting 35 U.S.C. § 312(a)(3)). Here, however, not until its Reply does Petitioner belatedly suggest that Ferrante’s disclosure of bone screws with self-tapping ends equally meets the limitation of claim 10 (with respect to the first member) as with claim 11 (with respect to the second member), and that both claims are obvious in light of “evidence” from Ferrante “that it was well known to equip bone screws with self-tapping ends.” Reply 26–27. We do not discern these arguments in the Petition, and consider them waived. See Netflix, Inc. v. DivX, LLC, 84 F.4th 1371,1377 (Fed. Cir. 2023) (“While the Board should not take an overly mechanistic view of a petition and decline to address an argument because the petitioner did not present it with ideal vigor and clarity, the Board should also not have to decode a petition to locate additional arguments beyond the ones clearly made.”). In sum, Petitioner’s error in failing to first address limitations of claim 10 in the Petition specific to the Cognet/Ferrante combination indicates a failure to meet the particularity requirements for what must be in the petition and cannot be left to be filled in on reply. See 35 U.S.C. § 312(a)(3); 37 C.F.R. §§ 42.22(a)(2) (requiring, among other things, “a detailed explanation of the significance of the evidence”), 42.104(b)(4)–(5) (requiring that petition “specify where each element of the claim is found in the prior art patents or printed publication relied upon” and, regarding submitted evidence, state “the relevance of the evidence to the challenge raised, including identifying specific portions of the evidence that support the challenge”). Microsoft, 2022 WL 989403, at *6. Accordingly, Petitioner has not shown persuasively that claim 11 would have been obvious in light of Cognet and Ferrante for the reasons set forth in the Petition. slip op. at 41

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “We also find persuasive Mr. Dominguez’s explanation that one of ordinary skill in the art would have understood “bore” as including stepped diameter holes, sometimes described as a bore having a counterbore. See generally Ex. 1018 ¶¶ 4–29; Reply 3–10. Three of Mr. Dominguez’s illustrative examples are reproduced in the annotated figures below. The above figures show Mr. Dominguez’s annotated illustrations from the Jackson (Ex. 1019, Fig. 3), Brånemark (Ex. 1021, Fig. 4), and Ray (Ex. 1025, Fig. 1) references as discussed at paragraphs 10, 12, and 13, respectively, of Mr. Dominguez’s Second Declaration. With reference to the above figures, Mr. Dominguez testifies that “Jackson describes a bone repair set screw in which ‘[t]he bore 27 comprises a first bore section 31, a second bore section 32,’ etc. delineated by shoulders 41, 42, etc. (Ex. 1019, 5:24– 43)” (Ex. 1018 ¶ 10); “Brånemark describes an osseous implantation device having body 1ʺ with first and second holding portions 21ʺ, 31ʺ and ‘an inner through bore with a first portion 4ʺ in the first holding portion and a second portion 5ʺ in the second holding portion.’” Ex. 1021, 4:44–46” (id. ¶ 12); and Ray discloses surgical calipers including “handle 12 having ‘stepped cylindrical bore 14,’” wherein “[c]ollar 20 of a shaft inserted in the bore ‘rests against a step of the bore 14’ (2:14–15)” (id. ¶ 13). Patent Owner responds that Mr. Dominguez’s examples “that allegedly show a single bore encompassing two or more stepped-diameter holes or a counterbore . . . . are specific to these references and divorced from the disclosures of the ’166 patent.” Sur-Reply 7. Insofar as the ’166 patent makes no mention of the term “bore” outside the claims, and Mr. Dominguez’s examples are all taken from the field of orthopedic surgery, we do not find this argument persuasive. Patent Owner further appears to contend that exemplary references to a “cylindrical stepped down bore” or a “stepped cylindrical bore” are too specific to be within the scope of the term “bore.” Sur-Reply 7–8. As these terms merely describe species within a larger genus, and Patent Owner presents no cogent reason to exclude them, we do not find this argument availing. Relatedly, we are also not persuaded by Patent Owner’s argument that “the prior art treats a ‘bore’ as an element that is distinct from a ‘counterbore.’” Id. at 8. Rather, we credit Mr. Dominguez’s testimony that “[a] counterbore is not a structure unto itself, a counterbore is part of a larger structure” as exemplified by numerous examples including Laps (Ex. 1028 ¶ 33 (sensor assembly wherein “bore 16 includes a counterbore 18”)); Martinez (Ex. 1029, 3:61 (surgical cutting instrument wherein “bore 56 has a counterbore 64”)); Zang (Ex. 1030, 2:49 (bone anchor having a “bore [that] includes a counterbore”)); Ledet (Ex. 1022, 29:3–5 (vertebral fixation plate having “through holes . . . . countersunk, or counterbored to accommodate the head of a bone screw”)); Seo (Ex. 1031, 3:45 (chair leg employing “counterbored bore 23”)); and Exner (Ex. 1032, 2:16 (extrusion press including “counterbored axial bore 6”)). Ex. 1018 ¶¶ 17–23. That a reference may refer to a figure as showing “bore 103” with “counterbore 105 . . . formed on one end” does not indicate that they are distinct structures as Patent Owner contends, but merely that the focus of each term is directed to the entire bore or to a particular aspect of the bore, i.e., its counterbore. See” slip op. at 22

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner subsequently proposed an alternative definition, as a person having “[a] Bachelor’s Degree in biomedical and/or mechanical engineering or similar training and . . . at least three years of experience with implant devices used for internal fixation of bones.” POR 5 (citing Ex. 2012 ¶¶ 32–33). According to Patent Owner, “[t]his hypothetical person would be capable of performing various design tasks and would understand the basic mechanical features and operation of orthopaedic implant devices [and] have an appreciation for orthopaedic fusion techniques and the medical issues and concerns faced by a doctor/surgeon charged when performing operations to implant orthopaedic devices.” Id. Despite some differences in wording, Patent Owner asserts (and Petitioner does not contest) that any “distinction between the parties’ proposed definitions of a POSITA does not affect the arguments set forth herein.” Id. (citing Ex. 2012 ¶ 34). Consistent with this view, we find the parties’ constructions equally applicable in light of the prior art of record and the disclosure of the ’166 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). We adopt, for convenience, Petitioner’s definition, but our analysis does not change depending on which of the two articulations are applied here. H.” slip op. at 12

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “one of ordinary skill in the art would understand that “bore,” as used in the context of claims 1 and 12, encompasses a multi-diameter passage, and in particular, one having stepped longitudinal cross sections such as that shown in Cognet’s Figure 1. See generally DI 11–13. For the reasons that follow, we conclude that one of ordinary skill in the art would have understood “bore” as such. Relying on the testimony of Mr. Dominguez, Petitioner initially proposed a construction of “bore” as “a usually cylindrical hole made by or as if by the turning or twisting movement of a tool.” Pet. 16 (citing Ex. 1002 ¶ 58). Petitioner’s proposal relied on Mr. Dominguez’s testimony that “[a] bore is a cylindrical hole made by the spinning rotation of a twist drill cutting tool. It is typically made by removing material from a solid or hollow object, similar to a tunnel or orifice.” Ex. 1002 ¶ 58. Pointing to its annotation of Cognet’s Figure 1, above, Patent Owner argued that that the term “bore” excludes a tunnel made by “two adjacent bores.” See Prelim. Resp. 21–25. In view of the then-available evidence, we provisionally construed “bore” as a hole or passage made by or as if by the turning or twisting movement of a tool such that its interior walls have cylindrical lateral cross-sections, and which do not exclude holes or passages having tapered or stepped longitudinal cross-sections. DI 13.” slip op. at 19

  Patent outcomesUS 11,298,166 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,298,166
• Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentable
  PTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed

    “Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17

  • Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed

    “The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22

  Patent outcomesUS 10,689,740 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · Nautilus
  Patents in suitUS 10,689,740
• Extractiontek Sales LLC v. Gene Pool Technologies, Inc.Some claims unpatentable
  PTAB · Oct 23, 2023 · IPR2022-01011 · APJ Cynthia M Hardman · IPR · Final written decision

  Claims 1–7 and 9–11 are unpatentable over the asserted obviousness grounds; claims 8 and 12–20 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “On the full trial record, we adopt Petitioner’s proposed level of ordinary skill in the art, with Patent Owner’s additions. The additions are consistent with the evidence of record. For example, we find that adding chemistry and biology degrees is appropriate in view of Dr. Miller’s testimony that college-level chemistry and biology courses typically include training on extractive technologies. Ex. 1017 (Miller Tr.), 38:9–39:18. We also agree with Patent Owner that the educational level of the inventors may be considered (see Env’t Designs, Ltd., 713 F.2d at 696), and on this record, we accept Patent Owner and Dr. Miller’s undisputed representation that “named inventor Jason Wasserman had a bachelor’s degree in Agricultural Science and Sustainable Agriculture, a life sciences degree.” Ex. 2008 (Miller Decl.) ¶ 32; PO Resp. 5. Thus, for the reasons above, we define a person of ordinary skill in the art as someone who would have had (1) a bachelor’s degree in chemistry, biology, mechanical engineering, chemical engineering, petroleum engineering, or an equivalent field of physical science, life science, or engineering; and some academic or industry experience working with, designing, or studying methods of extracting solute from a source material or similar devices; or (2) at least four years of industry experience working with, designing, or studying methods of extracting solute from a source material or similar devices.” slip op. at 11

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “Based on this experience, we determine that Dr. Miller qualifies as a person of ordinary skill in the art because by 1992, he had “at least four years of industry experience working with, designing, or studying methods of extracting solute from a source material or similar devices,” as required by the level of ordinary skill we adopt herein. He also avers that he gained additional training and engaged in additional extraction work prior to the effective filing date. Id. Additionally, between 2015 and 2020, Dr. Miller “enter[ed] the cannabis extraction and concentration industry, designing, building, and operating [his] own facility,” further qualifying him as a person of ordinary skill in the art. Ex. 2002 (Miller Decl.) ¶ 10; see also Reply 6 (acknowledging Dr. Miller’s post-2015 “experience and expertise in closed loop extraction systems”). Although this work started in 2015 (two years after the effective filing date of 2013), a person of ordinary skill in the art need not have been one of ordinary skill at the time of a patent’s filing date. See U.S. Endoscopy Group, Inc. v. CDX Diagnostics, Inc., IPR2014-00639, Paper 27, at 18 (Sept. 14, 2015) (“A witness must provide testimony about the level of skill in the art as of the critical date; however, the witness need not have acquired that knowledge as of the critical date.”). For the reasons discussed above, we determine that Dr. Miller is qualified in this proceeding to testify from the perspective of a person of ordinary skill in the art.” slip op. at 14

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We find that Patent Owner has the better argument. Patent Owner’s citations demonstrate that “[t]he ’751 patent consistently describes ‘solvent collection line’ as a line, a pipe, hose, or tube used for the transport of gasses or liquids,” and that this usage is consistent with the way both parties’ declarants use the term “line.” PO Resp. 29–30; Ex. 1001, 9:16–10:41, 14:65–15:10, Figs. 1, 2, 5; Ex. 2002 (Miller Decl.), ¶ 60; Ex. 2003 (Chess Depo. Tr.), 100:6–17, 145:20–146:7, 169:18–171:2. In contrast, Petitioner’s argument is undermined by the same passage it cites. Specifically, “what the ’751 Patent explains in the same paragraph Petitioner cites is that the ‘solvent collection line 190 is configured to pass through condensing system 105 between second pump 102 and solvent collection container 15.’” Sur-reply 14–15 (quoting Ex. 1001, 8:60–63) (emphasis Patent Owner’s). “Figure 5 shows that both ‘solvent collection line 190’ and ‘coolant line 109’ are still ‘lines’ as they pass through ‘first condenser column 107.’” Id. at 15 (citing Ex. 1001, Fig. 5, 9:48–58). Figure 1, in contrast, shows that coolant pump 104 is a component that is distinct from coolant line 109. See id. (citing Ex. 1001, Fig. 1, 9:6–25). For the above reasons, we construe “line” to mean “a pipe, hose, or tube.”” slip op. at 19

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “We need not define the exact contours of a “canister interface,” including deciding whether it is “more than a mere connector.” Nor do we need to construe the claim term “support.” It is sufficient to note that a canister interface is not simply the system’s canisters themselves. The plain language of the claims recite that the “canister interface” must be configured to “support” the canisters (thereby distinguishing the canister interface from the canisters themselves). The Specification likewise distinguishes the canister interface and the canisters, indicating that the canister interface “allow[s] canisters to be easily detached and reattached.” Ex. 1001, 11:61– 62. Similarly, Mr. Chess distinguished a “detachable canister interface” from the system’s canisters/containers, characterizing the former as a “fitting of some sort so that you can disconnect or connect the solvent source container to the extraction vessel or canister.” Ex. 2003 (Chess Depo. Tr.), 182:10–16 (emphasis added).” slip op. at 46

  Patent outcomesUS 9,144,751 mixed
  Claim construction§ 103 obviousnesscites KSR
  Patents in suitUS 9,144,751
• Extractiontek Sales LLC v. Gene Pool Technologies, Inc.Some claims unpatentable
  PTAB · Jul 26, 2023 · IPR2022-00625 · APJ Cynthia M Hardman · IPR · Final written decision

  Claims 1 and 7–17 are unpatentable: claims 1, 7, 9–13 under §102 over Britt; claims 8 and 14 under §103 over Britt and Buese; and claims 15–17 under §103 over Hebert and Britt. Claims 2–6 …

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “On the full trial record, we adopt Petitioner’s proposed level of ordinary skill in the art, as modified by Patent Owner. Patent Owner’s proposed additions to the educational level are consistent with the evidence of record. For example, we find that adding chemistry degrees is appropriate in view of Dr. Miller’s testimony that “extractive technologies are chemistry,” and that college level chemistry typically includes training on extractive technologies. Ex. 1023 (Miller Tr.), 35:9–22, 38:25–39:18. Similarly, adding biology degrees is appropriate because Dr. Miller testified that in training for a biology degree, one is exposed to college-level chemistry and training in extractive technologies. Id. at 38:9–24. We also agree with Patent Owner that the educational level of the inventors may be considered (see Envtl Designs, Ltd., 713 F.2d at 696), and on this record, we accept Patent Owner and Dr. Miller’s undisputed representation that “named inventor Jason Wasserman had a bachelor’s degree in Agricultural Science and Sustainable Agriculture, a life sciences degree.” Ex. 2007 (Miller Decl.) ¶ 37; PO Resp. 4.” slip op. at 10

  • Expert testimonyDecided for patent owner

    “ordinary skill in the art based on education because he holds degrees in geology and earth and environmental sciences, which are not specifically recited in the proposed level of ordinary skill in the art. Reply 3. Petitioner characterizes Dr. Miller’s degrees as “advanced degrees in life sciences” (id. at 3), while Patent Owner characterizes them as “at least an ‘equivalent physical science degree’” (Sur-reply 5). On this record, we determine that we need not resolve whether Dr. Miller’s degrees qualify him as a person of ordinary skill in the art, because we find that he is qualified based on his experience. Dr. Miller has “decades (1988 to present) of direct experience in the use of partial and complete extractions of diverse materials in environmental studies.” Ex. 2007 (Miller Decl.) ¶ 8. He has also “studied, used, and developed thousands of extractions to solubilize and remove oils, wastes, metals, and other toxins from soil, water, plants, and animal tissues for analysis.” Id. He avers that “[e]xtractive chemistry was core to [his] business practice in 1988 and remains so to this day,” and that “[b]y 1992 [he] would have developed ordinary skill in the art having 4 years of experience relevant to the current subject.” Id. ¶ 10. Based on this experience, we determine that Dr. Miller qualifies as a person of ordinary skill in the art because by 1992, he had “at least four years of industry experience working with, designing, or studying methods of extracting solute from a source material or similar devices,” as required by the level of ordinary skill we adopt herein. He also gained additional training and engaged in additional extraction work prior to the effective filing date. Id.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner

    “of a source material,” and “[w]ithin the canister, the source material is exposed to a solvent to create an extract mixture.” Pet. 18 (citing Ex. 1001, 2:1–3). We adopt this understanding of the term “canister,” because it is supported by the cited portion of the Specification and is undisputed on this record.” slip op. at 15

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “Ex. 1001, 22:1–6. We agree with Petitioner this language does not require control over when the extract mixture formed in step 1(c) is communicated to the extract containers in step 1(d). Reply 7. Dr. Miller conceded that “[e]xtraction is going to start instantaneous[ly],” such that at least some portion of an extract mixture is instantaneously created in step 1(c). Ex. 1023 (Miller Tr.), 67:23–68:7, 120:8–13. Thus, “the next step could occur instantaneously.” Reply 9. We see nothing in the claim language requiring any degree of completion of step 1(c), or any waiting period, before step 1(d) begins. Nor do Patent Owner’s briefs point to any particular aspect of these limitations that allegedly demand such an interpretation. See generally PO Resp. 5; Sur-reply 6–9. Dr. Miller asserts that the plain meaning of steps “does not allow for a passive, automatic, and continuous flow of extract mixture from the canister to one or more extract containers” (Ex. 2007 (Miller Decl.) ¶¶ 30–31), but he too fails to identify what in the language of these terms prohibits this. The claims here “do not exclude a continuous process, in which later steps are initiated as soon as at least some product from the previous step forms, while previous steps are still ongoing.” Kaneka Corp. v. Xiamen Kingdomway Group Co., 790 F.3d 1298, 1306 (Fed. Cir. 2015).” slip op. at 17

  Patent outcomesUS 9,587,203 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR
  Patents in suitUS 9,587,203
• Samsung Electronics Co., Ltd. v. Lynk Labs, Inc.Some claims unpatentable
  PTAB · May 5, 2023 · IPR2022-00098 · APJ Arthur M Peslak · IPR · Final written decision

  Claims 1, 3, and 4 are unpatentable as obvious over the stated combinations; claim 2 was not shown unpatentable because the driver was not shown configured to receive the rectifier’s forward voltages.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We agree with Patent Owner that a person of ordinary skill in the art would have had experience in LED devices. For this reason, we apply Patent Owner’s proposed level of ordinary skill in the art because it comports with the level of skill reflected in the ’149 patent and the prior art of record. However, if we were to apply Petitioner’s proposed level of skill, our Decision would not be affected.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Upon review of the entire record, we determine that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed

    “Dr. Ducharme’s testimony that “the spacing of the chips in Zhang would not likely be so close as to create overheating issues” (Ex. 2002 ¶ 111) is unsupported by any disclosure of the actual spacing of Zhang’s chips. Consequently, his testimony that there would be no overheating concerns in Zhang due to the spacing of the chips is entitled to little, if any, weight. Dr. Ducharme further testifies that the components of Zhang’s driver “could easily increase the temperature of the LED 19 chips on the circuit board, which can cause LEDs to generate less illumination, burn out and otherwise adversely affect their performance.” Ex. 2002 ¶ 126. Dr. Ducharme further testifies that “[i]t is well-known that excessive operational temperatures can reduce the illumination provided by the LEDs, can decrease the operational lifetime of the LEDs, and if the temperature is sufficiently high, it can cause LED junction failure and a burnt-out LED.” Id. We agree with this testimony, which as discussed below, is consistent with Salam. Dr. Ducharme’s testimony concerning overheating issues caused by the driver components contradicts Patent Owner’s ’s contention that there would not be “an overheating issue with Zhang’s LED exit sign circuit in Figure 2.1.” PO Resp. 30. Regardless of whether Zhang’s LEDs in Figure 2.1 have a heat problem or not, Salam teaches the advantages of using a heat sink. Salam teaches that a heat sink will result in a higher efficiency of the LEDs and improved life. Ex. 1006, 16:38–43. The Federal Circuit, in DyStar Textilfarben GmBH & Co v. C.H. Patrick Co., 464 F.3d 1356 (Fed. Cir. 2006), stated that “the desire to enhance commercial opportunities by improving a product or process is universal–and even common-sensical . . . the proper question is whether the ordinary artisan possesses the knowledge and skills rendering him capable of combining the prior art references.” Id. at 1368. Dr. Ducharme testified that a person of ordinary skill in the art “would have an understanding of the generation of heat and using a heat sink to remove unwanted heat from electronics and LED lighting devices.” Ex. 1102, 23:18–24:3. Dr. Ducharme’s testimony is consistent with Petitioner’s contention that the combination of Zhang and Salam “would have been a straightforward combination of known components and technologies, according to known methods, to produce the predictable result of reducing/ mitigating heat effects in a circuit.” Pet. 17 (citing Ex. 1002 ¶ 106). Patent Owner next contends it would be extremely burdensome and costly to modify Zhang to add a heat sink layer because “each of the multiple chips mounted and epoxied to Zhang’s circuit board in the exit sign would have to be modified.” PO Resp. 30 (citing Ex. 2002 ¶ 112). Dr. Ducharme’s testimony repeats the Patent Owner Response verbatim and is entitled to little, if any, weight. Ex. 2002 ¶ 112. Nonetheless, this contention is unavailing because it is based on Patent Owner’s bodily incorporation of Zhang and Salam. Patent Owner next contends that a person of ordinary skill in the art” slip op. at 27

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Regardless of whether Zhang’s LEDs in Figure 2.1 have a heat problem or not, Salam teaches the advantages of using a heat sink. Salam teaches that a heat sink will result in a higher efficiency of the LEDs and improved life. Ex. 1006, 16:38–43. The Federal Circuit, in DyStar Textilfarben GmBH & Co v. C.H. Patrick Co., 464 F.3d 1356 (Fed. Cir. 2006), stated that “the desire to enhance commercial opportunities by improving a product or process is universal–and even common-sensical . . . the proper question is whether the ordinary artisan possesses the knowledge and skills rendering him capable of combining the prior art references.” Id. at 1368. Dr. Ducharme testified that a person of ordinary skill in the art “would have an understanding of the generation of heat and using a heat sink to remove unwanted heat from electronics and LED lighting devices.” Ex. 1102, 23:18–24:3. Dr. Ducharme’s testimony is consistent with Petitioner’s contention that the combination of Zhang and Salam “would have been a straightforward combination of known components and technologies, according to known methods, to produce the predictable result of reducing/ mitigating heat effects in a circuit.” Pet. 17 (citing Ex. 1002 ¶ 106).” slip op. at 27

  Patent outcomesUS 10,517,149 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,517,149
• Home Depot USA, Inc. v. Lynk Labs, Inc.Some claims unpatentable
  PTAB · May 5, 2023 · IPR2022-00023 · APJ Arthur M Peslak · IPR · Final written decision

  Claims 1 and 4 are unpatentable over the stated § 103 combinations; Petitioner did not show claim 2 unpatentable because it did not explain how the LED array’s forward voltage is received by the driver.

  RulingsFinal written decision

  • Skill levelSkill level board ownOther

    “degree in electrical engineering, or similar technical field, with two years of experience in the field of design and/or development of light-emitting diodes (LEDs) and circuits in the context of lighting control systems.” Pet. 11–12 (citing Ex. 1002 ¶ 34). Petitioner further contends that “[a]n increase in experience could compensate for less education.” Id. at 12. Patent Owner proposes the same level of skill in the art. See PO Resp. 6. We apply the parties’ undisputed level of ordinary skill in the art because it comports with the level of skill reflected in the ’149 patent and the prior art of record.” slip op. at 8

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “We credit Dr. Lebby’s testimony over Dr. Ducharme for the following reasons. First, in Deese, power cable 28 is inserted into an opening in rubber housing 21. Ex. 1008, Fig. 2A. [R]ubber housing 21 forms a water-tight seal around the power cable 28.” Id. at 4:63–65. Dr. Ducharme does not explain why Hochstein’s protruding heat sink shell could not similarly be inserted through rubber housing 21 with a water-tight seal. Further, Dr. Lebby relies on the similarity between the structures of Deese and Hochstein. Hochstein uses gasket 45 and weather seal 48 to seal housing 10 with electrical lead 49 and heat sink shell 38 extending therethrough. Ex. 1010, 5: 39–40, 5:63:65, Fig. 8.” slip op. at 47

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionOther

    “Our analysis starts with the claim language. Claim 1 recites “a driver, wherein the driver includes at least one transistor and at least one capacitor” and “the driver is configured to receive an AC voltage from a mains power source and provide a voltage and current to the at least one LED circuit.” Ex. 1001, 23:16–17, 26:22–24. Dr. Ducharme testifies that power is determined by multiplying voltage and current. Ex. 2008 ¶ 63. The language of claim 1, thus, supports Patent Owner’s construction which is also consistent with the dictionary definition offered by Petitioner which also defines “driver” as [a] program, circuit or device used to power or control other programs, circuits or devices.” Ex. 1007, 4 (emphasis added). The Specification provides “the driver providing an AC voltage and current to one or more LED circuits.” Ex. 1001, 3:65–67. Thus, the Specification also provides support for Patent Owner’s construction. For the foregoing reasons, we apply Patent Owner’s proposed construction of “driver” because it is consistent with the language of claim 1 and the description of driver in the Specification. We note that the adjective “LED” prior to circuits or devices in Patent Owner’s construction is not necessary because that it essentially repeats limitation 1.e.” slip op. at 12

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for petitioner

    “We begin with the claim language itself which is “the package is a heat sinking reflective material.” Ex. 1001, 23:18–19 (emphasis added). In its analysis, Patent Owner parses “heat sinking reflective material” out of context by omitting the italicized language “the package is” preceding “heat sinking reflective material.” PO Resp. 29. The deposition testimony of Dr. Lebby and Dr. Ducharme’s declaration testimony cited by Patent Owner are also out of context. The Specification of the ’149 patent defines “package” as an integrated unit that “in certain applications may preferably include a heat sink, a reflective material, a lens for directing light, phosphor nano-crystals or light changing or enhancing substances.” Ex. 1001, 5:30–33. Because heat sink and reflective material are listed separately in the Specification, this disclosure suggests that, at least in certain embodiments, a package with a heat sink separate from a reflective material would fall within the scope of limitation 1.c. This is further confirmed by comparing the packages illustrated in Figures 25 and 26 of the ’149 patent which are reproduced above. Figure 25 is described as illustrating “heat sinking material 198 . . . integrated into the package 30.” Id. at 17:34–35. Figure 26 is described as illustrating reflector 202 “integrated into the package 30 for optimized light dispersion.” Id. at 17:47–49. As can be seen from a visual comparison of Figures 25 and 26, reflector 202 is separate from heat sinking material 198. Given the disclosure in the ’149 patent of a package with a heat sink” slip op. at 15

  Patent outcomesUS 10,517,149 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,517,149

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.