- Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution deniedPTAB · Apr 25, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable under the asserted obviousness grounds.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“experience working on the development of materials or components for electronic devices such as batteries.” Pet. 2. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less work experience, and additional work experience could compensate for less formal education.” Id. Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’014 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). in this proceeding.” Pet. 3. Patent Owner contends that “[t]he Board need not construe any term in order to determine that institution should be denied.” Prelim. Resp. 4. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision. See Realtime Data, 912 F.3d at 1375.” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“For these reasons, we are not persuaded that Petitioner sufficiently establishes that a POSITA would have been motivated to modify Hanafusa in light of Dobashi with a reasonable expectation of success as Petitioner contends. Accordingly, we determine that Petitioner fails to demonstrate a reasonable likelihood of prevailing in its assertion that the subject matter of claim 1, and claims 4 and 8 that depend therefrom, would have been obvious over the combined teachings of Hanafusa and Dobashi.” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Petitioner also focuses on Hanafusa’s teaching that all known methods can be used to make a rough surface low-profile, and Dobashi’s teaching that RSm can be used as an indicator for judgment of the surface, to support its contention that a POSITA would have been motivated to apply Dobashi’s RSm to further achieve Hanafusa’s purpose, without explaining how and why that would be the case. In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness and is rough when RSm is small.” Id. at 3:1–3, 6:27–29. Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66– 3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66–3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 11,346,014 - Innoscience (Zhuhai) Technology Company, Ltd / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentablePTAB · Mar 18, 2025 · IPR2023-01381 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–3 and 7–9 are unpatentable as obvious over Uemoto and Smith; the motion to amend is granted, and proposed substitute claims 13 and 14 are not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In order to determine whether an invention would have been obvious at the time the application was filed, we consider the level of ordinary skill in the pertinent art. Graham, 383 U.S. at 17. In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quotation omitted). Petitioner contends a person of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering, chemical engineering, physics, or material science, or a closely related field, and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies.” Pet. 5–6. Petitioner contends “[a]dditional education could substitute for professional experience and vice versa.” Id. at 6. Patent Owner contends that a person of ordinary skill in the art would have had “at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” PO Resp. 7 (citing Ex. 2009 ¶ 82). Upon review of the evidence of record and the parties’ arguments, we adopt Petitioner’s definition of the person of ordinary skill in the art as it is consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art). We note, however, that the conclusions reached in this Decision would be the same under either proposed definition of the ordinarily skilled artisan. See Ex. 2009 ¶ 83 (Dr. Schubert testifying that his opinions would be the same under either proposed definition); Ex. 1033 ¶ 9 (Dr. Shealy testifying that the differences in proposed definitions of the ordinarily skilled artisan “would not change the outcome of the invalidity analysis in any material manner”); PO Resp. 7; Pet. Reply 1.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“compensated GaN layer above the barrier layer, and a gate contact above the compensated GaN layer.” Ex. 1001, 5:12–18. Petitioner contends the term “compensated” indicates that the step of compensating the GaN layer has already occurred, such that the term “compensated GaN layer” should be construed as a “‘[d]oped GaN layer formed with a step to passivate its impurities’ which is a ‘product-by-process’ limitation.”5 Pet. 12–14. And, because compensation with hydrogen was the “critical step” distinguishing the claims from the prior art, and because hydrogenation in as-grown III-nitride materials had been well known for over a decade by 2009, Petitioner contends “compensated” “cannot be interpreted as mere hydrogen presence in as-grown material, a well-known property of doped GaN.” Id. at 15. Patent Owner contends “compensated GaN material” should be construed as “a semiconductor GaN gate material in which one type of impurity (for example, donor) cancels the electrical effects of the other type of impurity (for example, acceptor).” PO Resp. 11 (citing Ex. 2009 ¶ 92) (emphasis added). Patent Owner contends this construction is consistent with the IEEE dictionary, which defines “compensated semiconductor” as 5 Given that product-by-process steps in a device claim are not entitled to patentable weight, Petitioner contends “the prior art only need show a material with passivated impurities to show unpatentability, not the step to achieve it.” Pet. 15–16. “[a] semiconductor in which one type of impurity or imperfection (for example, donor) partially cancels the electric effects of the other type of impurity or imperfection (for example, acceptor).” PO Resp. 14 (quoting Ex. 2004). Patent Owner contends its construction is also consistent with the written description of the ’294 patent, which explains that a compensated GaN material is part of the gate and includes a p-type impurity that imparts an electrical effect (i.e., conductivity), as well as a second impurity, e.g., hydrogen, that partially cancels the electrical effect of the p-type impurity, rendering the layer semi-insulating. Id. at 14–15 (citing Ex. 1001, 3:10–13, 3:43–45). On this record, we construe “compensated GaN layer” as “a GaN layer in which one type of impurity (for example, donor) partially cancels the electric effects of the other type of impurity (for example, acceptor).” This is consistent with the disclosures of the ’294 patent, the IEEE dictionary definition, and the construction ultimately adopted by the ITC. Ex. 2004, 3; Ex. 1049, 16–17 (ITC construing “compensated GaN layer” to mean “a GaN layer in which one type of impurity partially cancels the electrical effects of another type of impurity”); Ex. 1001, 3:43–45 (explaining that the compensated GaN layer of the ’294 patent is formed through the “passivation of a p-type impurity using hydrogen”). For the reasons set forth below, however, we decline to construe “compensated GaN layer” as a product-by-process claim term (as asserted by Petitioner), or to limit the compensated GaN layer to a gate material (as asserted by Patent Owner).” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“There are two exceptions to the general rule that we apply the ordinary and customary meaning of a claim term: (1) when a patentee sets out a definition and acts as his own lexicographer, or (2) when the patentee disavows the full scope of a claim term either in the specification or during prosecution. See Thorner, 669 F.3d at 1365. The standards for lexicography and disclaimer, however, are “exacting.” Id. at 1366. There is no argument that the patentees acted as their own lexicographer to redefine the term “compensated GaN layer.” With respect to disavowal, a “patentee may demonstrate intent to deviate from the ordinary and accustomed meaning of a claim term by including in the specification expressions of manifest exclusion or restriction, representing a clear disavowal of claim scope.” Thorner, 669 F.3d at 1366 (quoting Teleflex, Inc. v. Ficosa N. Am. Corp., 299 F.3d 1313, 1325 (Fed. Cir. 2002)). As noted by Patent Owner, the title of the ’294 patent is, in part, “Compensated Gate MISFET” and much of the discussion of the ’294 patent is of a compensated GaN layer that is directly below the gate contact and above a barrier layer and operates in conjunction with the gate contact to control the on/off state of the transistor. PO Resp. 12–14. We are presented with insufficient argument or evidence to conclude, however, that these disclosures rise to the level of a disclaimer. For example, although the title of the ’294 patent is directed to a “Compensated Gate MISFET,” claim 1 is more broadly directed to “[a] column III Nitride transistor.” Ex. 1001, 5:12, code (54). Nor are we directed to an expression or statement of manifest exclusion in the ’294 patent that would serve to disclaim any “compensated GaN layer” that is not directly below the gate and/or that does not function in concert with the gate electrode to control the on/off state of the transistor. See Thorner, 669 F.3d at 1366. With respect to the stated goals of the invention, as noted by Patent Owner, one of the primary purposes of the compensated GaN layer of the ’294 patent is to reduce gate leakage and gate capacitance. Ex. 1001, 2:13– 19, 3:18–21 (“[U]sing a compensated semiconductor layer 38 leads to low gate leakage during device operation.”). We cannot use the goals of the invention, however, to rewrite the claims or insert terms that are not present. See Thorner, 669 F.3d at 1366. Moreover, the prior art of record indicates that a compensated GaN layer that is below the gate contact and above a barrier layer, but not part of the active gate structure, may also “decrease the leakage current between the gate and the drain.” Ex. 1006 ¶¶ 44 (“Even when a positive bias of 5 V or higher is applied to the gate electrode, no significant gate-leakage current is observed.”), 61. As such, evidence of record suggests that a person of ordinary skill in the art would have understood that one of the primary goals disclosed in the ’294 patent is achieved regardless of whether the compensated GaN layer is part of the gate, or simply in close vicinity to the gate. In view of the foregoing, we are not persuaded that the written description of the ’294 patent indicates that the “compensated GaN layer” must be part of the gate structure.” slip op. at 17
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“To be probative, Patent Owner must prove there is a nexus between the presented evidence and the merits of the claimed invention. See Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988). A rebuttable presumption of nexus applies when the “patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco, 851 F.2d at 1392). “That is, presuming nexus is appropriate ‘when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.’” Id. (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). If the praise is not limited to the features of the claimed invention, the patent owner may still prove nexus “by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. at 1373–74 (quoting In re Huang, 100 F.3d 135, 140 (Fed. Cir. 1996)). Patent Owner contends that the compensated gate of the ’294 patent “was a breakthrough invention and resulted in the first commercially viable enhancement-mode GaN transistor.” PO Resp. 60 (citing Ex. 2009 ¶¶ 192– 193, 197; Ex. 2021). Patent Owner further contends that this achievement required the counter-intuitive use of a compensated gate material in the gate structure, and represented “a technological leap that laid the foundation for viable enhancement-mode GaN transistors.” Id. at 61–62. For this achievement, Patent Owner contends the inventor, Dr. Alex Lidow, received the 2015 SEMI Award. Id. at 60 (citing Ex. 2021). Upon review of Patent Owner’s evidence and the parties’ arguments, we find that Patent Owner’s objective indicia evidence is entitled to little, if any, weight. The evidence of praise relied upon by Patent Owner is not clearly linked to the claimed invention or any particular product having each of the claimed features of the ’294 patent. Ex. 2021. For example, the 2015 SEMI award was provided to Dr. Lidow “for commercialization of GaN power devices.” Id. An article explaining the award indicates that “high cost” previously “limited [the] commercial success” of GaN technologies, but Dr. Lidow was able to overcome these issues, “from resolving packaging limitations to establishing a low-cost supply chain,” “through persistence.” Id. This praise is not demonstrably linked to the claimed invention or any particular device, and does not mention the use of a compensated gate, or any other relevant feature recited in the claims. In view of the foregoing, we determine that Patent Owner’s objective evidence of non-obviousness is entitled to little, if any, weight.” slip op. at 20
Patent outcomesUS 8,350,294 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 8,350,294 - Honeywell International Inc. v. DSM IP Assets B.V.Institution deniedPTAB · Aug 21, 2024 · IPR2024-00493 · APJ Erica A Franklin · IPR · Institution
The Board denied institution because Honeywell did not show a reasonable likelihood that claims 1–9 were unpatentable over any of its three obviousness combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Accordingly, we determine that Petitioner has not shown a reasonable likelihood of prevailing in its obviousness challenge of independent claim 1 or dependent claims 2–9 over the combination of Simmelink and Section 73.1015.” slip op. at 23
- Skill levelOther
“PHOSITA) at the time of the ’532 patent “would have had at least a Bachelor’s degree in the field of chemistry, chemical engineering, polymer chemistry, or materials science and at least three years of relevant work experience in the field of high strength fibers.” Pet. 8 (citing Ex. 1003 ¶ 18). Petitioner adds that individuals with different educational backgrounds could still be of ordinary skill in the art if they have “additional experience [that] compensates for a deficit in their education and experience stated above.” Id. According to Patent Owner, a person or ordinary skill in the art, would have (i) a bachelor’s degree in chemistry, polymer chemistry, materials science, chemical engineering, or biomedical engineering and (ii) three years of experience in designing and manufacturing gel-spun UHMWPE yarns. At this level of skill, a PHOSITA would have a detailed understanding of the information provided in the Technology Background, Section II, supra, including (i) the differences between linear HDPE and UHMWPE, (ii) the history underlying Section 73.1015 and the early failures of the 1960s-era blue, melt-extruded polyethylene sutures, (iii) why the molecular orientation of polyethylene molecules leads to strong yarns in the special case of gel-spun UHMWPE, and (iv) the challenges associated with coloring gel-spun UHMWPE yarns, especially for end-use medical applications. Prelim. Resp. 33–34. We note that the parties’ proposed definitions are largely similar, except that Patent Owner additionally recognizes a Bachelor’s degree in biomedical engineering and requires experience in designing and manufacturing gel-spun UHMWPE yarns. In any event, we do not need to the same under either proposed definition.” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed patent owner constructionDecided for patent owner
“a skilled artisan would have understood that the “gel spinning” process recited in the claims requires the use of a solvent during the spinning process. Indeed, the Specification describes this term, as follows: Gel spinning is understood to include at least the steps of spinning filaments from a solution of ultra-high molecular weight polyethylene in a spin solvent; cooling the filament obtained to form a gel filament removing at least partly the spin solvent from the gel filament; removing at least partly the spin solvent from the gel filament; and drawing the filament in at least one drawing step before during or after removing spin solvent. Ex. 1001, 2:31–37. We recognize the inventor’s lexicography as dispositive with respect to the meaning of the term “gel spinning.” See Phillips v. AWHCorp., 415 F.3d 1303, 1316 (Fed. Cir. 2005); SciMed Life Sys., Inc. v. Advanced Cardiovascular Sys., Inc., 242 F.3d 1337, 1343–44 (Fed. Cir.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for patent owner
“Claim 1 describes gel spinning as the manner by which the filaments comprised in the claimed colored multi-filament yarn are obtained. This, on its face, is a product-by-process claim element because it describes the filament structure being obtained in a particular way, i.e., by gel spinning. See Kamstrup A/S v. Axioma Metering UAB, 43 F.4th 1374, 1382 (Fed. Cir. 2022) (agreeing with the Board that “cast in one piece” is a product-by-process claim element as it describes the structure being cast “in a particular way”). For this element to be limiting, it must impart “structural and functional differences” that distinguish the claimed product from the prior art. See Amgen Inc. v. F. Hoffman-La Roche Ltd, 580 F.3d 1340, 1365–67 (Fed. Cir. 2009). Patent Owner argues persuasively that gel spinning imparts structural and functional differences to the claimed product because the process “creates overlap between polyethylene molecules within the UHMWPE filaments that maximizes the intermolecular Van der Waals interactions, resulting in highly crystalline filaments with high tensile strength.” Prelim. Resp. 38, 22 (citing Ex. 1014, 62–66). According to Patent Owner, “the structure of the gel spun UHMWPE is substantially different from other types of UHMWPE such as compression-molded and ram-extruded UHMWPE used to make joint replacements and other orthopedic implants.” Id. at 38.” slip op. at 9
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,280,532 - Apple Inc. v. RJ Technology, LLCInstitutedPTAB · Aug 20, 2024 · IPR2024-00597 · APJ Jon B Tornquist · IPR · Institution
The Board instituted review of claims 1–18 on all asserted grounds and granted Apple’s motion to join IPR2023-01183.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Having considered the arguments and evidence presented by Petitioner, we determine that Petitioner has demonstrated a reasonable likelihood of prevailing on at least one of the challenged claims of the ’641 patent. Accordingly, we institute an inter partes review as to all the challenged claims of the ’641 patent on all the grounds of unpatentability set forth in the Petition. And, for the reasons set forth below, we grant Petitioner’s Motion for Joinder.” slip op. at 2
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“In considering a motion for joinder, and whether such joinder is appropriate, the Board may consider “whether a new ground of unpatentability is raised in the second petition, how the cost and schedule of the first proceeding will be impacted if joinder is granted, and whether granting joinder will add to the complexity of briefing and/or discovery.” Patent Trial and Appeal Board Consolidated Trial Practice Guide November 20197 at 76 (citing Kyocera Corp. v. SoftView LLC, IPR2013-00004, Paper 15 at 4 (PTAB Apr. 24, 2013)).” slip op. at 9
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. at 11–12 (citing Ex. 1002 ¶¶ 50–51). Upon review of the prior art of record and the Petitioner’s arguments, we adopt Petitioner’s uncontested definition of the person of ordinary skill in the art for purposes of this Decision as it appears consistent with the ’641 patent and the prior art of record.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner provides constructions for the terms “A method for improving . . . characterized in that,” “ratio of positive electrode material to negative electrode material as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V” (claim 5), “as calculated by a specific capacity with a charge voltage limited to 4.2 V” (claim 1), and “at least 7500 of capacity” (claim 11). Pet. 8–11. For purposes of this decision, we determine that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 8
Claim constructioncites Phillips · KSR · GrahamPatents in suitUS 7,749,641 - Nespresso USA, Inc. v. K-Fee System GmbHInstitution deniedPTAB · Jun 10, 2024 · IPR2024-00239 · APJ Jon B Tornquist · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–20 would have been obvious over either asserted combination.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, Petitioner does not demonstrate a reasonable likelihood of prevailing with respect to any of claims 1–20 of the ’094 patent. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“The express language of the claim, however, does not support using the “central axis” as the measuring point for determining if one object is laterally offset from another. For example, the term “central axis” is not used in the relevant claim phrase and the dictionary definitions of “lateral” relied upon by Petitioner and Mr. Jobin to show the ordinary meaning of the claim term do not suggest that the “central axis” is the reference point for determining whether a first object is “laterally offset” from a second object. As such, we determine that the claim language supports Patent Owner’s construction requiring that the “groove” be “off to the side” of the entire mandrel, and not merely the “central axis” of the mandrel. Prelim. Resp. 54. We must also resolve whether the entire groove is required to be laterally offset from the chamfered mandrel, or only a portion of it. On this point, the claims do not use the term “portion,” but rather specify that the “groove” is “laterally offset from the chamfered mandrel.” Ex. 1001, 14:4– 5, 15:19–20. This suggests that the entire “groove” must be offset from the “chamfered mandrel.”” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“That argument, however, does not explain why it would have been obvious to laterally offset the groove of Yoakim from the chamfered mandrel. Rather, as demonstrated by Mr. Jobin’s testimony, this argument relates to the general use of a sealing member in a groove, to the extent it was ultimately determined that such a configuration is not expressly disclosed in Yoakim. Id.; Ex. 1003 ¶ 296 (“It would have been obvious to one skilled in the art to position a sealing member in a groove to solidify the between counter-force portion 161 and engaging portion 157 in Figure 35 of Yoakim is more appropriately identified as the claimed “groove.” Prelim. Resp. 60–61. We need not resolve this issue, however, as Petitioner does not persuasively demonstrate that either potential “groove” is “laterally offset” from the chamfered mandrel. placement of the seal and improve its sealing stability and strength. Furthermore, it would have been obvious to one skilled in the art to utilize a groove and seal configuration in the brewing head . . . .”) (emphasis added). Even if we interpret the recited portion of the Petition as an argument for placing the groove entirely to the side of the mandrel in Yoakim, the Petition does not persuasively explain why one of ordinary skill in the art would have sought to do so. In Figure 35 of Yoakim, the seal and groove, as well as an elastic loading means, act as a valve means to control the level of pressure exerted in the capsule and “optimize interaction of water and the ground coffee particles to obtain a good extraction of the coffee and aroma compounds.” Ex. 1004 ¶¶ 370–372, 382, 396–398, 434–436, 445; Ex. 1003 ¶¶ 286–290; Pet. 63. These are the same beneficial properties relied upon by Petitioner to support the proposed combination, and Petitioner does not persuasively explain why one of ordinary skill in the art would have modified Yoakim in order to achieve results that are already obtained in the identified embodiment. Pet. 63. In view of the foregoing, we determine that Petitioner does not demonstrate a reasonable likelihood that claims 1 and 12 would have been obvious over the combined disclosures of Yoakim, Jarisch 929, and Rossi.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,542,094 - PTAB · May 24, 2024 · IPR2023-00861 · APJ Christopher M Kaiser · IPR · Remand
The Board denied institution because Petitioner did not show a reasonable likelihood that any challenged claim was unpatentable under any asserted ground.
RulingsRemand decision- RemandOther
“Accordingly, the Director instructed us to “determine whether Petitioner has demonstrated that Figure 1 of Godefroy ‘is clear on its face’ or would have reasonably suggested the placement of Godefroy’s sacrificial anode ‘within 10 inches’ of the hot liquid inlet.” Id. at 9. “In making this determination,” the Director instructed us to “consider whether the expert testimony provides sufficient ‘technical detail, explanation, or statements supporting why the expert determines that the feature in question was required or would have been obvious based on the prior art disclosure.’” Id. In addition, although the Director’s decision “is limited to [our] application of Hockerson to the grounds in the Petition involving Godefroy,” the Director instructed us also to “consider what effect, if any, this decision has on the other asserted grounds.” Id. Finally, the Director instructed us to “set forth [our] interpretation” of “the limitation ‘within 10 inches of a hot liquid inlet to the radiator.’” Id. at 8 n.4.” slip op. at 4
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“original decision, the Director’s decision, and the evidence currently of record, we determine that Petitioner has not shown a reasonable likelihood that it will prevail in showing that at least one of the challenged claims is unpatentable. Accordingly, we do not institute an inter partes review of any challenged claim based on any ground asserted in the Petition. IV. ORDER For the reasons given, it is: ORDERED that, pursuant to 35 U.S.C. § 314, the Petition is denied, and no inter partes review is instituted.” slip op. at 19
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“evidence. The challenged claims require that a sacrificial anode be placed within a certain distance—10 inches—of the hot liquid inlet, and, because the inlet has some non-zero size, it might be possible for an anode to be within that distance from some parts, but not from all parts, of the inlet. Accordingly, specifying the center axis of the inlet as the point from which to measure the distance to the anode improves on the plain words of the claim in terms of achieving the claim’s objective of placing the anode within a specified distance of the inlet. Moreover, when discussing the distance from the inlet to the anode, the specification of the ’494 patent uses the language “within 10 inches in any direction of the center axis of the inlet connection.” Ex. 1001, 7:61–64. Thus, the intrinsic evidence supports adopting Petitioner’s claim construction. Petitioner’s declarant, Dr. Medlin, relies on Petitioner’s proposed construction. See, e.g., Ex. 1004 ¶¶ 20 (noting that the construction “within 10 inches of the center axis of [a] hot liquid inlet” “ha[s] been adopted by Petitioner”), 96 (“the sacrificial anodes contained in each of the turbulators 2 would be placed within 10 inches of a center axis of a hot liquid inlet to the radiator of Tomosada”), 144 (“A POSITA would understand from Figure 1 that the sacrificial anode 14 is within 10 inches of a center axis of a hot liquid inlet”), 267 (“These teachings would further motivate a POSITA to located the sacrificial anode 12 within 10 inches of a center axis of the hot liquid inlet.”). This support for Petitioner’s proposed construction provides further reason for us to adopt it. Because it is supported by the intrinsic evidence of record, because Patent Owner proposes no alternative construction, and because Petitioner’s expert supports it, we adopt the construction of “within 10 inches of a hot liquid inlet to the radiator” that Petitioner proposes. Thus, we construe this term as “within 10 inches of the center axis of a hot liquid inlet to the radiator.” In other words, when discussing the distance between a hot liquid inlet and a sacrificial anode, we interpret “hot liquid inlet” as “center axis of the hot liquid inlet.”” slip op. at 5
- BurdenNot shown unpatentable
“Inherency may be relied upon in arguing either anticipation or obviousness. Schering, 339 F.3d at 1377 (applying inherency in an anticipation context); Par Pharma. Inc. v. TWI Pharma., Inc., 773 F.3d 1186, 1195–96 (Fed. Cir. 2014) (applying inherency in an obviousness context). In both cases, however, “[t]he mere fact that a certain thing may result from a given set of circumstances is not sufficient.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010). Instead, “the limitation at issue necessarily must be present, or the natural result of the combination of elements expressly disclosed by the prior art.” Par Pharma., 773 F.3d at 1195–96. Here, Petitioner has not shown sufficiently that, in Godefroy, the sacrificial anode necessarily is placed within 10 inches of the center axis of the hot liquid inlet. Dr. Medlin testifies that Figure 1 of Godefroy shows that “an entirety . . . or at least a significant portion of the sacrificial anode 14, is within 10 inches of a center axis of the inlet.” Ex. 1004 ¶ 144. But we cannot say that Figure 1 of Godefroy is clear on its face, or reasonably suggests, that this is necessarily the case. There are no dimensions shown on Figure 1, so it is unclear from the figure what the diameter of pipe 12 is. If that diameter is larger than 20 inches, then it simply is untrue that “sacrificial anode 14 is . . . necessarily placed within 10 inches of a center axis of a hot liquid inlet to the radiator,” as Dr. Medlin testifies. Id. ¶ 361. As noted above, neither Petitioner nor Dr. Medlin relies on the hot liquid inlet of Godefroy having any particular diameter, and Godefroy is silent as to the diameter of its inlet. Pet. 69–70; Ex. 1004 ¶¶ 144, 359–361, 381–382, 406–408; Ex. 1008, 1–15. Moreover, as Patent Owner notes, there is a wide range of sizes of radiators, including automobile radiators, available. Prelim. Resp. 3–5; Exs. 2001–2003. In the absence of any testimony or other evidence that tends to show that radiator inlet pipes necessarily have diameters less than 20 inches, Petitioner has not shown sufficiently that the diameter of Godefroy’s inlet pipe is small enough to ensure that any portion of the anode necessarily is within 10 inches of the center axis of the inlet.” slip op. at 11
Claim constructioncites Phillips - Mara Renewables Corporation v. DSM IP Assets, B.V.Institution deniedPTAB · Apr 18, 2024 · IPR2024-00070 · APJ Zhenyu Yang · IPR · Institution
The Board denied institution because the Petition did not show a reasonable likelihood that claims 1–15 were anticipated by Radianingtyas or obvious over either asserted combination.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“We have authority under 35 U.S.C. § 314, which provides that an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons provided below, we determine Petitioner has not demonstrated a reasonable likelihood that it would prevail with respect to at least one claim challenged in the Petition. Accordingly, we deny institution of an inter partes review.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, we construe the claim term “in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id.; see also Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc) (holding that the words of a claim “are generally given their ordinary and customary meaning,” which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention, i.e., as of the effective filing date of the patent application”). Claim terms need only be construed to the extent necessary to resolve the controversy. Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011). On this record and for purposes of this Decision, we see no need to construe any claim term.” slip op. at 6
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner does not provide a definition of the level of ordinary skill in the art. See Prelim. Resp. 19. Patent Owner also states that any differences between the parties’ proposed definition of the skill level would not impact its arguments. Id. For purposes of this Decision, we adopt Petitioner’s definition of the skill level because it is consistent with the prior art’s demonstration of the level of ordinary skill at the relevant time. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 7
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“triglyceride, DHA, and heptadecanoic acid content recited therein. In order to anticipate a claim, a prior art reference “must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements arranged as in the claim.” NetMoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1370 (Fed. Cir. 2008) (quotation marks omitted). A reference, however, can anticipate a claim “even if it does not expressly spell out all the limitations arranged or combined as in the claim, if a person of skill in the art, reading the reference, would at once envisage the claimed arrangement or combination.” Microsoft Corp. v. Biscotti, Inc., 878 F.3d 1052, 1068 (Fed. Cir. 2017) (quotation marks and brackets omitted). As explained below, here, Petitioner has not shown Radianingtyas discloses a microbial oil comprising the required triglyceride, DHA and heptadecanoic acid content. Specifically, although the exemplified strain ONC-T18 produces oil that meets the claimed triglyceride fraction and heptadecanoic acid level, Petitioner has not shown the same oil contains the recited DHA level.” slip op. at 10
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 8,207,363 - Amperex Technology Ltd. v. Semiconductor Energy Laboratory Co., Ltd.Institution deniedPTAB · Mar 12, 2024 · IPR2023-01349 · APJ Christopher M Kaiser · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of proving any challenged claim unpatentable on the asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2023). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, we determine the information presented in the Petition does not establish a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. Accordingly, we do not institute an inter partes review of any claim on any ground asserted in the Petition.” slip op. at 2
- BurdenDenied
“Given this, to show that Blangero’s disclosure of MgO or LiF in its coating teaches or suggests a rock-salt crystal structure, Petitioner needs to explain why a person of ordinary skill in the art either would have understood the compounds to have a rock-salt crystal structure when manufactured according to the disclosure of Blangero or would have chosen to use MgO or LiF in a rock-salt crystal structure rather than in another available form. On the first point, Petitioner argues that “‘the stable phase at room temperature and pressure conditions’ of MgO is ‘a rocksalt cubic structure of NaCl (space group Fm-3m).’” Pet. 28 (quoting Ex. 1030, 16; citing Ex. 1003 ¶ 142). But, as Petitioner’s declarant, Dr. Hayes, points out, Blangero does not teach forming MgO in a room-temperature process. Ex. 1003 ¶ 142 (Blangero’s “second firing step” occurs at “925 °C for 12 hours”); see Ex. 1005 ¶ 110 (teaching the firing step to which Dr. Hayes refers). Thus, the significance of rock-salt-type MgO being “the stable phase at room temperature and pressure conditions” is unclear. To the extent that Dr. Hayes explains why MgO, which “is well known to crystallize even at substantially lower temperatures,” such as “room temperature and pressure conditions,” would “do so more readily at [a higher temperature of] 925 °C,” this argument is not discussed, nor even cited, in the Petition. Ex. 1003 ¶¶ 90–94; see Pet. 28. Accordingly, any reliance on this argument by Petitioner constitutes improper incorporation by reference. 37 C.F.R. § 42.6(a)(3). Thus, Petitioner does not show sufficiently that a person of ordinary skill in the art either would have understood MgO to have a rock-salt crystal structure when manufactured according to the disclosure of Blangero or would have chosen to use MgO in a rock-salt crystal structure rather than in another available form. Similarly, with respect to LiF, neither Petitioner nor Dr. Hayes sufficiently explains the choice of rock-salt-type material over other options. Pet. 29 (arguing only that Ex. 1013 shows that “LiF has rock salt structure”); Ex. 1003 ¶ 143 (same). Thus, Petitioner does not show sufficiently that Blangero teaches or suggests a rock-salt crystal structure by virtue of its teaching that either MgO or LiF is present.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not found
“The 2012 study on which Petitioner relies did not find “superior structural stability” over other lithium-titanium-oxygen compounds, as Petitioner argues. Instead, the study noted that the structure of “LiTiO2 prepared by high-temperature sintering TiO2 with lithium salt . . . impl[ies] LiTiO2 has superior structural stability in organic electrolyte as compared to other Li-Ti-O oxides.” Ex. 1029, 1. Thus, the structural stability was implied from the chemical structure of the material rather than found through study of the material. Moreover, the implied structural stability was only for LiTiO2 that was prepared in a particular way, by high-temperature sintering of TiO2 with lithium salt, and Petitioner does not allege that a person of ordinary skill in the art would have prepared the LiTiO2 they substituted for Blangero’s Li2TiO3 using this method. As for Petitioner’s argument that the study found that LiTiO2 outperformed Li2TiO3, we are not persuaded. The study compared particles with an LiTiO2 coating to uncoated particles, not to particles coated with Li2TiO3. Ex. 1029, 4, Figs. 4(c), 4(d). Although the study notes that particles coated with “[m]onoclinic Li2TiO3 and spinel Li4Ti5O12” exhibit “a noticeable capacity decay . . . when charged at high operating voltage and cycled above room temperature,” it concludes only that particles coated with LiTiO2 “exhibited inspiring high-voltage cycling capability as well as thermal stability than the pristine counterpart.” Id. at 1, 4. In addition, the pristine particles used in the study were made from “Li[NixCoyMnz]O2 (0≤x,y,z<1) (called as LNCM),” and the particles in Blangero do not contain either nickel or manganese in their cores. Ex. 1005 ¶¶ 9–40 (particles contain lithium, oxygen, cobalt, and metals chosen from the group consisting of aluminum, gallium, boron, magnesium, titanium, iron, copper, calcium, barium, yttrium, tin, antimony, sodium, zinc, zirconium, silicon); Ex. 1029, 1. Petitioner does not explain why a person of ordinary skill in the art would expect the study’s results to extend to Blangero’s particles made from a different material. Pet. 29–30. Because Petitioner has not shown sufficiently that Blangero teaches or suggests a second region comprising a rock-salt crystal structure or that a person of ordinary skill in the art would have had a reason to substitute rocksalt-type LiTiO2 for the materials disclosed in Blangero, Petitioner has not shown a reasonable likelihood that it would prevail on claim 1 on its Blangero-based grounds.” slip op. at 15
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner, “[i]ndividuals with different education and additional experience could still [have been] of ordinary skill in the art if that additional experience compensate[d] for a deficit in their education and experience.” Id. On the present record, Patent Owner does not contest Petitioner’s definition of a person of ordinary skill in the art. Prelim. Resp. 19. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’660 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’660 patent and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 8
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,043,660 - Mara Renewables Corporation v. DSM IP Assets, B.V.Institution deniedPTAB · Feb 23, 2024 · IPR2023-01342 · APJ Jon B Tornquist · IPR · Institution
The Board denied institution because the petition did not show a reasonable likelihood that any challenged claim was anticipated or obvious over the asserted references.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Having considered the arguments and evidence presented by Petitioner and Patent Owner, we determine that Petitioner has not demonstrated a reasonable likelihood of prevailing on at least one of the challenged claims of the ’959 patent. Accordingly, we deny institution of an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that, as of the earliest claimed priority date of the ’959 patent, an ordinarily skilled artisan “would have had a Master of Science degree in an academic discipline emphasizing chemistry, chemical engineering, or biochemistry, in combination with training or at least two to three years of related work experience with lipid chemistry technologies, including but not limited to lipid extraction technologies.” Pet. 6 (citing Ex. 1003 ¶¶ 63–64). Alternatively, Petitioner proposes that an ordinarily skilled artisan “could have also had a Doctorate degree in a relevant academic discipline with one to two years of related work experience in the same discipline.” Id. Petitioner argues that an ordinarily skilled artisan “would have been familiar with microbial oils” and “would have understood the benefits of polyunsaturated fats (PUFAs), microbial sources for obtaining them, and methods for culturing and extracting oils from those microbial sources.” Id. (citing Ex. 1003 ¶¶ 36–48, 64). Patent Owner does not provide a definition of the level of ordinary skill in the art, but “reserves its right to proffer what it contends to be the appropriate level of ordinary skill in the art should the Board institute review.” Prelim. Resp. 15. Patent Owner asserts, however, that a person of ordinary skill in the art would have a detailed understanding of the information provided in its Technology Background section, including “the expected impact of cellular biomass growth characteristics on the proportion of triglycerides and phospholipids produced during a microbial fermentation.” Id. For purposes of this Decision, we adopt Petitioner’s definition of the skill level of an ordinarily skilled artisan as it is consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art). As to the background knowledge possessed by the ordinarily skilled artisan, we agree that such an artisan would have been aware of methods for culturing and extracting oils from microbial sources, including the impact of growth characteristics on the proportions of triglycerides and phospholipids produced during microbial fermentation. Pet. 6; Prelim. Resp. 15.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that all claim terms of the ’959 patent “should be given their plain and ordinary meaning.” Pet. 3. Patent Owner does not contend that any claim terms require construction. Prelim. Resp. 14–15. For purposes of this Decision, we determine that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“3. Analysis In order to anticipate a claim, a prior art reference “must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements ‘arranged as in the claim.’” NetMoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1370 (Fed. Cir. 2008) (quoting Connell v. Sears, Roebuck & Co., 722 F.2d 1542, 1548 (Fed. Cir. 1983)). Radianingtyas discloses microbial oils with various levels of DHA and arachidonic acid. There is no disclosure of an individual microbial oil, however, that contains at least 45% DHA and 1.5% or less arachidonic acid by weight as required by claim 1. With respect to the level of DHA, although Radianingtyas might be interpreted to disclose that some microorganisms can produce up to 60% DHA,8 Radianingtyas discloses that the DHA content of ONC-T18 is “typical[ly]” 35% of the total intracellular fatty acids, and in each experiment disclosed in Radianingtyas DHA was produced by ONC-T18 at 8 Radianingtyas discloses that “the oil producing microbe can produce a lipid composition comprising from about 25% to about 40% of an omega-3 fatty acid, such as n-3 DHA.” Ex. 1007, 26:31–33. It then gives examples that include 15%, 20%, 45%, 50%, 55%, and 60%, which are outside of the disclosed range. Id. at 26:33–34. Dr. Curtis contends the disclosure as a whole should be read as “from about 15% to about 60% of an omega-3 fatty acid, such as n-3 DHA.” Ex. 1003, 39 n.1. Dr. Curtis identifies no microbe in Radianingtyas, however, that is shown to produce more than 40% DHA, and Radianingtyas expressly notes that the typical DHA content produced by ONC-T18 is 35%. Thus, we question Dr. Curtis’ conclusions regarding the DHA content disclosure of Radianingtyas. levels less than “at least 45%.”9 Ex. 1007, 32:21–25 (noting that the “typical composition of fatty acids” produced by ONC-T18 includes 25% DHA), 34:4–37:14 (noting that the control microorganism produced 13.54%, 19.98%, 18.77%, 18.77%, 21.48%, 28.48%, and 14.13% DHA) (Figure 12), 91 (Table 5) (noting that total DHA produced by ONC-T18 was from 24- 34.2%), 99:22–24 (“Of particular interest is ONC-T18 which produces up to 90% of its C20 to C22 content as DHA which is approximately 35% of the total intracellular fatty acids.”). Thus, we are not persuaded that Radianingtyas discloses microbial oils produced by ONC-T18 that have a DHA content of “at least 45%.” As noted by Petitioner, Radianingtyas provides a definition of “purify” and “purifying,” and notes that when these terms are used, it means that a composition could be, for example, 90% pure. Pet. 11; Ex. 1007, 7:26–8:2. As an example of how the term “purified” may be used, Radianingtyas states “[f]or example, if a disclosed eukaryotic microorganism, for example, produces 35% DHA, this could be further ‘purified’ such that the final lipid composition was greater than 90% DHA.” Id. at 8:2–4. We are directed to no actual microbial oil in Radianingtyas, however, that was purified to have increased levels of DHA. Rather, Petitioner only proffers what Radianingtyas might say if such an oil existed or had been purified to increase levels of DHA.10” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,757,959 - Amperex Technology Ltd. v. Semiconductor Energy Laboratory Co., Ltd.Institution deniedPTAB · Dec 5, 2023 · IPR2023-01016 · APJ Christopher M Kaiser · IPR · Institution
Institution was denied because the petition did not show a reasonable likelihood that claims 1–8 were unpatentable over the asserted Shim- or Fujiki-based grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Because Petitioner relies on Shim and Fey to show that a person of ordinary skill in the art would have understood that fluorine would be present in a crack portion of the Shim or Shim/Lee particle, because the requirement for fluorine to be present in a crack portion appears in all the challenged claims, and because Petitioner does not show sufficiently that Shim and Fey would have suggested the presence of fluorine in a crack portion, we determine that Petitioner has not shown a reasonable likelihood of prevailing with respect to any claim challenged on the basis of Shim.” slip op. at 17
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art “would have had at least a bachelor’s degree in chemistry, chemical engineering, or materials science and at least five years of experience in the field of batteries and battery materials.” Pet. 33. According to Petitioner, “[i]ndividuals with different education and additional experience could still be of ordinary skill in the art if that additional experience compensates for a deficit in their education and experience.” Id. (citing Ex. 1003 ¶¶ 83–91). On the present record, Patent Owner does not contest Petitioner’s definition of a person of ordinary skill in the art. Prelim. Resp. 19–20. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’828 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’828 patent and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“As explained more fully below, we need not construe any claim terms to determine that Petitioner fails to show sufficiently that the prior art teaches or suggests the subject matter of the challenged claims. Thus, after considering the arguments and information presented in the Petition and Preliminary Response, we determine that we do not need to construe any terms expressly for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“Because Petitioner relies on Shim and Fey to show that a person of ordinary skill in the art would have understood that fluorine would be present in a crack portion of the Shim or Shim/Lee particle, because the requirement for fluorine to be present in a crack portion appears in all the challenged claims, and because Petitioner does not show sufficiently that Shim and Fey would have suggested the presence of fluorine in a crack portion, we determine that Petitioner has not shown a reasonable likelihood of prevailing with respect to any claim challenged on the basis of Shim.” slip op. at 17
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,741,828
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.