• Innoscience (Zhuhai) Technology Company, Ltd / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentable
  PTAB · Mar 18, 2025 · IPR2023-01381 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 1–3 and 7–9 are unpatentable as obvious over Uemoto and Smith; the motion to amend is granted, and proposed substitute claims 13 and 14 are not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In order to determine whether an invention would have been obvious at the time the application was filed, we consider the level of ordinary skill in the pertinent art. Graham, 383 U.S. at 17. In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quotation omitted). Petitioner contends a person of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering, chemical engineering, physics, or material science, or a closely related field, and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies.” Pet. 5–6. Petitioner contends “[a]dditional education could substitute for professional experience and vice versa.” Id. at 6. Patent Owner contends that a person of ordinary skill in the art would have had “at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” PO Resp. 7 (citing Ex. 2009 ¶ 82). Upon review of the evidence of record and the parties’ arguments, we adopt Petitioner’s definition of the person of ordinary skill in the art as it is consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art). We note, however, that the conclusions reached in this Decision would be the same under either proposed definition of the ordinarily skilled artisan. See Ex. 2009 ¶ 83 (Dr. Schubert testifying that his opinions would be the same under either proposed definition); Ex. 1033 ¶ 9 (Dr. Shealy testifying that the differences in proposed definitions of the ordinarily skilled artisan “would not change the outcome of the invalidity analysis in any material manner”); PO Resp. 7; Pet. Reply 1.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “compensated GaN layer above the barrier layer, and a gate contact above the compensated GaN layer.” Ex. 1001, 5:12–18. Petitioner contends the term “compensated” indicates that the step of compensating the GaN layer has already occurred, such that the term “compensated GaN layer” should be construed as a “‘[d]oped GaN layer formed with a step to passivate its impurities’ which is a ‘product-by-process’ limitation.”5 Pet. 12–14. And, because compensation with hydrogen was the “critical step” distinguishing the claims from the prior art, and because hydrogenation in as-grown III-nitride materials had been well known for over a decade by 2009, Petitioner contends “compensated” “cannot be interpreted as mere hydrogen presence in as-grown material, a well-known property of doped GaN.” Id. at 15. Patent Owner contends “compensated GaN material” should be construed as “a semiconductor GaN gate material in which one type of impurity (for example, donor) cancels the electrical effects of the other type of impurity (for example, acceptor).” PO Resp. 11 (citing Ex. 2009 ¶ 92) (emphasis added). Patent Owner contends this construction is consistent with the IEEE dictionary, which defines “compensated semiconductor” as 5 Given that product-by-process steps in a device claim are not entitled to patentable weight, Petitioner contends “the prior art only need show a material with passivated impurities to show unpatentability, not the step to achieve it.” Pet. 15–16. “[a] semiconductor in which one type of impurity or imperfection (for example, donor) partially cancels the electric effects of the other type of impurity or imperfection (for example, acceptor).” PO Resp. 14 (quoting Ex. 2004). Patent Owner contends its construction is also consistent with the written description of the ’294 patent, which explains that a compensated GaN material is part of the gate and includes a p-type impurity that imparts an electrical effect (i.e., conductivity), as well as a second impurity, e.g., hydrogen, that partially cancels the electrical effect of the p-type impurity, rendering the layer semi-insulating. Id. at 14–15 (citing Ex. 1001, 3:10–13, 3:43–45). On this record, we construe “compensated GaN layer” as “a GaN layer in which one type of impurity (for example, donor) partially cancels the electric effects of the other type of impurity (for example, acceptor).” This is consistent with the disclosures of the ’294 patent, the IEEE dictionary definition, and the construction ultimately adopted by the ITC. Ex. 2004, 3; Ex. 1049, 16–17 (ITC construing “compensated GaN layer” to mean “a GaN layer in which one type of impurity partially cancels the electrical effects of another type of impurity”); Ex. 1001, 3:43–45 (explaining that the compensated GaN layer of the ’294 patent is formed through the “passivation of a p-type impurity using hydrogen”). For the reasons set forth below, however, we decline to construe “compensated GaN layer” as a product-by-process claim term (as asserted by Petitioner), or to limit the compensated GaN layer to a gate material (as asserted by Patent Owner).” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner

    “There are two exceptions to the general rule that we apply the ordinary and customary meaning of a claim term: (1) when a patentee sets out a definition and acts as his own lexicographer, or (2) when the patentee disavows the full scope of a claim term either in the specification or during prosecution. See Thorner, 669 F.3d at 1365. The standards for lexicography and disclaimer, however, are “exacting.” Id. at 1366. There is no argument that the patentees acted as their own lexicographer to redefine the term “compensated GaN layer.” With respect to disavowal, a “patentee may demonstrate intent to deviate from the ordinary and accustomed meaning of a claim term by including in the specification expressions of manifest exclusion or restriction, representing a clear disavowal of claim scope.” Thorner, 669 F.3d at 1366 (quoting Teleflex, Inc. v. Ficosa N. Am. Corp., 299 F.3d 1313, 1325 (Fed. Cir. 2002)). As noted by Patent Owner, the title of the ’294 patent is, in part, “Compensated Gate MISFET” and much of the discussion of the ’294 patent is of a compensated GaN layer that is directly below the gate contact and above a barrier layer and operates in conjunction with the gate contact to control the on/off state of the transistor. PO Resp. 12–14. We are presented with insufficient argument or evidence to conclude, however, that these disclosures rise to the level of a disclaimer. For example, although the title of the ’294 patent is directed to a “Compensated Gate MISFET,” claim 1 is more broadly directed to “[a] column III Nitride transistor.” Ex. 1001, 5:12, code (54). Nor are we directed to an expression or statement of manifest exclusion in the ’294 patent that would serve to disclaim any “compensated GaN layer” that is not directly below the gate and/or that does not function in concert with the gate electrode to control the on/off state of the transistor. See Thorner, 669 F.3d at 1366. With respect to the stated goals of the invention, as noted by Patent Owner, one of the primary purposes of the compensated GaN layer of the ’294 patent is to reduce gate leakage and gate capacitance. Ex. 1001, 2:13– 19, 3:18–21 (“[U]sing a compensated semiconductor layer 38 leads to low gate leakage during device operation.”). We cannot use the goals of the invention, however, to rewrite the claims or insert terms that are not present. See Thorner, 669 F.3d at 1366. Moreover, the prior art of record indicates that a compensated GaN layer that is below the gate contact and above a barrier layer, but not part of the active gate structure, may also “decrease the leakage current between the gate and the drain.” Ex. 1006 ¶¶ 44 (“Even when a positive bias of 5 V or higher is applied to the gate electrode, no significant gate-leakage current is observed.”), 61. As such, evidence of record suggests that a person of ordinary skill in the art would have understood that one of the primary goals disclosed in the ’294 patent is achieved regardless of whether the compensated GaN layer is part of the gate, or simply in close vicinity to the gate. In view of the foregoing, we are not persuaded that the written description of the ’294 patent indicates that the “compensated GaN layer” must be part of the gate structure.” slip op. at 17

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “To be probative, Patent Owner must prove there is a nexus between the presented evidence and the merits of the claimed invention. See Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988). A rebuttable presumption of nexus applies when the “patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco, 851 F.2d at 1392). “That is, presuming nexus is appropriate ‘when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.’” Id. (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). If the praise is not limited to the features of the claimed invention, the patent owner may still prove nexus “by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. at 1373–74 (quoting In re Huang, 100 F.3d 135, 140 (Fed. Cir. 1996)). Patent Owner contends that the compensated gate of the ’294 patent “was a breakthrough invention and resulted in the first commercially viable enhancement-mode GaN transistor.” PO Resp. 60 (citing Ex. 2009 ¶¶ 192– 193, 197; Ex. 2021). Patent Owner further contends that this achievement required the counter-intuitive use of a compensated gate material in the gate structure, and represented “a technological leap that laid the foundation for viable enhancement-mode GaN transistors.” Id. at 61–62. For this achievement, Patent Owner contends the inventor, Dr. Alex Lidow, received the 2015 SEMI Award. Id. at 60 (citing Ex. 2021). Upon review of Patent Owner’s evidence and the parties’ arguments, we find that Patent Owner’s objective indicia evidence is entitled to little, if any, weight. The evidence of praise relied upon by Patent Owner is not clearly linked to the claimed invention or any particular product having each of the claimed features of the ’294 patent. Ex. 2021. For example, the 2015 SEMI award was provided to Dr. Lidow “for commercialization of GaN power devices.” Id. An article explaining the award indicates that “high cost” previously “limited [the] commercial success” of GaN technologies, but Dr. Lidow was able to overcome these issues, “from resolving packaging limitations to establishing a low-cost supply chain,” “through persistence.” Id. This praise is not demonstrably linked to the claimed invention or any particular device, and does not mention the use of a compensated gate, or any other relevant feature recited in the claims. In view of the foregoing, we determine that Patent Owner’s objective evidence of non-obviousness is entitled to little, if any, weight.” slip op. at 20

  Patent outcomesUS 8,350,294 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 8,350,294
• Intel Corporation v. Besang Inc.No claims unpatentable
  PTAB · Dec 11, 2024 · IPR2023-00991 · APJ Jon B Tornquist · IPR · Final written decision

  The Board held claims 1 and 13–17 not unpatentable, finding the asserted obviousness grounds deficient in claim limitations or motivation to combine.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “The parties proposed definitions differ in that Petitioner would permit a degree in “materials science” and require three years, as opposed to two years, of relevant experience. Compare Pet. 9 with PO Resp. 14. On this record, we adopt Patent Owner’s proposed definition, as it is more consistent with the prior art of record and the disclosures of the ’702 patent. We note, however, that neither party contends that the outcome of this case depends on the slight differences in the proposed definitions of a person of ordinary skill in the art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate. Pet. 11–12. First, the plain language of the claim does not require merely a “layer” having a plurality of vertically oriented semiconductor memory cells, but rather “a stackable add-on layer” having a plurality of vertically oriented semiconductor memory cells; that plurality is bonded to the dielectric layer. Ex. 1001, 12:29–32. A construction that gives meaning to all words of the claim is preferred. Merck & Co., Inc. v. Teva Pharm. USA, Inc., 395 F.3d 1364, 1372 (Fed. Cir. 2005) (“A claim construction that gives meaning to all the terms of the claim is preferred over one that does not do so.”).” slip op. at 12

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “As discussed above, we do not understand a “stackable add-on layer” to include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. Pet. 16, 29 n.11, 51 (“In Lee, each level 3104 is deposited on the underlying level of array 3101.”). Therefore, Petitioner has not shown that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Analysis: Claims 14–17 Claims 14–17 each depend, directly or indirectly, from claim 13. Petitioner’s arguments with respect to these claims do not remedy the deficiencies noted above with respect to claim 13. Pet. 31–41. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14–17 would have been obvious over Lee.” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Petitioner has not demonstrated that Aspar would improve Lee, would solve a problem in Lee, and that Petitioner is proposing to use Aspar in a way that is not disclosed in the reference. PO Resp. 49–50 (citing Ex. 2029 ¶¶ 153–162); Tr. 57:24–58:12; Pet. 61; KSR, 550 U.S. at 417 (asking whether a technique “would improve similar devices in the same way”), 420 (asking whether there was a known problem in the art), 421 (asking whether one of ordinary skill in the art had reason to “pursue the known options”); Intel, 61 F.4th at 1381 (explaining that obviousness may be demonstrated by showing that there was a known problem in the art (“cache coherency in multiprocessor systems”) and that a person of ordinary skill in the art would recognize that that the prior art solution to this problem (“global segmented secondary cache”) would improve the system of another prior art reference). Petitioner does not persuasively show that there was any known problem in the art with respect to Lee or its monolithic method of constructing memory arrays. Nor does Petitioner provide persuasive argument or evidence that Aspar’s wafer bonding would improve Lee’s memory device.10 For example, Petitioner states in a conclusory fashion that Aspar would address the known problem of “fabricating 3D structures,” but does not explain what those problems were or why Lee fails to solve them. Pet. 61. Dr. Sechen’s testimony merely parrots the Petition, providing no further analysis or explanation of what problem might exist in Lee when fabricating its 3D structures. Ex. 1003 ¶ 212. The Petition notes that Aspar transfers “thin layers of very good thickness homogeneity and with a high crystalline quality,” but the Petition never asserts that Lee’s direct deposition method fails to provide these same or similar qualities. Pet. 60–61.” slip op. at 27

  Patent outcomesUS 7,378,702 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,378,702
• Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentable
  PTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed

    “Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17

  • Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed

    “The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22

  Patent outcomesUS 10,689,740 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · Nautilus
  Patents in suitUS 10,689,740
• Apple Inc. v. RJ Technology, LLCInstituted
  PTAB · Aug 20, 2024 · IPR2024-00597 · APJ Jon B Tornquist · IPR · Institution

  The Board instituted review of claims 1–18 on all asserted grounds and granted Apple’s motion to join IPR2023-01183.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Having considered the arguments and evidence presented by Petitioner, we determine that Petitioner has demonstrated a reasonable likelihood of prevailing on at least one of the challenged claims of the ’641 patent. Accordingly, we institute an inter partes review as to all the challenged claims of the ’641 patent on all the grounds of unpatentability set forth in the Petition. And, for the reasons set forth below, we grant Petitioner’s Motion for Joinder.” slip op. at 2

  • PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted

    “In considering a motion for joinder, and whether such joinder is appropriate, the Board may consider “whether a new ground of unpatentability is raised in the second petition, how the cost and schedule of the first proceeding will be impacted if joinder is granted, and whether granting joinder will add to the complexity of briefing and/or discovery.” Patent Trial and Appeal Board Consolidated Trial Practice Guide November 20197 at 76 (citing Kyocera Corp. v. SoftView LLC, IPR2013-00004, Paper 15 at 4 (PTAB Apr. 24, 2013)).” slip op. at 9

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. at 11–12 (citing Ex. 1002 ¶¶ 50–51). Upon review of the prior art of record and the Petitioner’s arguments, we adopt Petitioner’s uncontested definition of the person of ordinary skill in the art for purposes of this Decision as it appears consistent with the ’641 patent and the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner provides constructions for the terms “A method for improving . . . characterized in that,” “ratio of positive electrode material to negative electrode material as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V” (claim 5), “as calculated by a specific capacity with a charge voltage limited to 4.2 V” (claim 1), and “at least 7500 of capacity” (claim 11). Pet. 8–11. For purposes of this decision, we determine that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 8

  Claim constructioncites Phillips · KSR · Graham
  Patents in suitUS 7,749,641
• Home Depot U.S.A., Inc. v. Lynk Labs, Inc.All claims unpatentable
  PTAB · May 22, 2023 · PGR2022-00009 · APJ Monica S Ullagaddi · PGR · Final written decision

  Claims 1–5, 7–12, and 14–19 are unpatentable based on lack of written description, anticipation by Bruning, or obviousness over Bruning and Kabel.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “lighting device.” Accordingly, we determine that the level of ordinary skill in the art is “a bachelor’s degree in electrical engineering, or similar technical field, with two years of relevant experience in the field of design and/or development of LEDs and circuits,” as Petitioner proposes and that “the field of design and/or development” would be “in the context of lighting devices” as Patent Owner proposes, in which “[a]n increase in experience could compensate for less education.” Id.; Pet. 24 (citing Ex. 1002 ¶ 46).” slip op. at 15

  • Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer foundDecided for patent owner

    “theoretically fall under the “or greater” portion of the amended claim limitation “forward voltage of 6V or greater,” Applicant distinguished Colby on the basis that the 120V AC voltage from a wall outlet is not “the minimum voltage difference required between the anode and cathode of the LEDs in the claimed circuit to allow current to flow through the LEDs.” See Ex. 1023, 9 (emphasis added). Applicant’s argument specifically identifies the claim language at issue––“forward voltage of 6V or greater”––and specifically states that it is not disclosed because Colby does not disclose the minimum voltage and instead, discloses something else, something larger–– 120V AC voltage. Accordingly, we conclude that Applicant disclaimed any voltage that is more than “the minimum voltage difference required between the anode and cathode of the LEDs in the claimed circuit to allow current to flow through the LEDs” from the scope of “forward voltage.”” slip op. at 25

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateUnpatentable

    “4. 35 U.S.C. § 112(a) With respect to the written description requirement, we are persuaded” slip op. at 32

  • Disclosure Requirements (§112) › Enablement (Wands, Amgen full scope)Not enabledUnpatentable

    “Basis § Unpatentable Unpatentable Lack of written description, 3, 10, 17 112(a) 3, 10, 17 Lack of enablement 3, 10, 17 112(b) Indefiniteness 3, 10, 17 Lack of written description, 4, 11, 18 112(a) 4, 11, 18 Lack of enablement 4, 11, 18 112(b) indefiniteness 4, 11, 18” slip op. at 77

  Patent outcomesUS 10,932,341 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · Nautilus
  Patents in suitUS 10,932,341
• Samsung Electronics Co., Ltd. v. Lynk Labs, Inc.Some claims unpatentable
  PTAB · May 5, 2023 · IPR2022-00098 · APJ Arthur M Peslak · IPR · Final written decision

  Claims 1, 3, and 4 are unpatentable as obvious over the stated combinations; claim 2 was not shown unpatentable because the driver was not shown configured to receive the rectifier’s forward voltages.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We agree with Patent Owner that a person of ordinary skill in the art would have had experience in LED devices. For this reason, we apply Patent Owner’s proposed level of ordinary skill in the art because it comports with the level of skill reflected in the ’149 patent and the prior art of record. However, if we were to apply Petitioner’s proposed level of skill, our Decision would not be affected.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Upon review of the entire record, we determine that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed

    “Dr. Ducharme’s testimony that “the spacing of the chips in Zhang would not likely be so close as to create overheating issues” (Ex. 2002 ¶ 111) is unsupported by any disclosure of the actual spacing of Zhang’s chips. Consequently, his testimony that there would be no overheating concerns in Zhang due to the spacing of the chips is entitled to little, if any, weight. Dr. Ducharme further testifies that the components of Zhang’s driver “could easily increase the temperature of the LED 19 chips on the circuit board, which can cause LEDs to generate less illumination, burn out and otherwise adversely affect their performance.” Ex. 2002 ¶ 126. Dr. Ducharme further testifies that “[i]t is well-known that excessive operational temperatures can reduce the illumination provided by the LEDs, can decrease the operational lifetime of the LEDs, and if the temperature is sufficiently high, it can cause LED junction failure and a burnt-out LED.” Id. We agree with this testimony, which as discussed below, is consistent with Salam. Dr. Ducharme’s testimony concerning overheating issues caused by the driver components contradicts Patent Owner’s ’s contention that there would not be “an overheating issue with Zhang’s LED exit sign circuit in Figure 2.1.” PO Resp. 30. Regardless of whether Zhang’s LEDs in Figure 2.1 have a heat problem or not, Salam teaches the advantages of using a heat sink. Salam teaches that a heat sink will result in a higher efficiency of the LEDs and improved life. Ex. 1006, 16:38–43. The Federal Circuit, in DyStar Textilfarben GmBH & Co v. C.H. Patrick Co., 464 F.3d 1356 (Fed. Cir. 2006), stated that “the desire to enhance commercial opportunities by improving a product or process is universal–and even common-sensical . . . the proper question is whether the ordinary artisan possesses the knowledge and skills rendering him capable of combining the prior art references.” Id. at 1368. Dr. Ducharme testified that a person of ordinary skill in the art “would have an understanding of the generation of heat and using a heat sink to remove unwanted heat from electronics and LED lighting devices.” Ex. 1102, 23:18–24:3. Dr. Ducharme’s testimony is consistent with Petitioner’s contention that the combination of Zhang and Salam “would have been a straightforward combination of known components and technologies, according to known methods, to produce the predictable result of reducing/ mitigating heat effects in a circuit.” Pet. 17 (citing Ex. 1002 ¶ 106). Patent Owner next contends it would be extremely burdensome and costly to modify Zhang to add a heat sink layer because “each of the multiple chips mounted and epoxied to Zhang’s circuit board in the exit sign would have to be modified.” PO Resp. 30 (citing Ex. 2002 ¶ 112). Dr. Ducharme’s testimony repeats the Patent Owner Response verbatim and is entitled to little, if any, weight. Ex. 2002 ¶ 112. Nonetheless, this contention is unavailing because it is based on Patent Owner’s bodily incorporation of Zhang and Salam. Patent Owner next contends that a person of ordinary skill in the art” slip op. at 27

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Regardless of whether Zhang’s LEDs in Figure 2.1 have a heat problem or not, Salam teaches the advantages of using a heat sink. Salam teaches that a heat sink will result in a higher efficiency of the LEDs and improved life. Ex. 1006, 16:38–43. The Federal Circuit, in DyStar Textilfarben GmBH & Co v. C.H. Patrick Co., 464 F.3d 1356 (Fed. Cir. 2006), stated that “the desire to enhance commercial opportunities by improving a product or process is universal–and even common-sensical . . . the proper question is whether the ordinary artisan possesses the knowledge and skills rendering him capable of combining the prior art references.” Id. at 1368. Dr. Ducharme testified that a person of ordinary skill in the art “would have an understanding of the generation of heat and using a heat sink to remove unwanted heat from electronics and LED lighting devices.” Ex. 1102, 23:18–24:3. Dr. Ducharme’s testimony is consistent with Petitioner’s contention that the combination of Zhang and Salam “would have been a straightforward combination of known components and technologies, according to known methods, to produce the predictable result of reducing/ mitigating heat effects in a circuit.” Pet. 17 (citing Ex. 1002 ¶ 106).” slip op. at 27

  Patent outcomesUS 10,517,149 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,517,149
• Alcon Inc. / Alcon Vision, LLC et al. v. Amo Development, LLCNo claims unpatentable
  PTAB · Dec 12, 2022 · IPR2021-00862 · APJ Sheridan K Snedden · IPR · Final written decision

  Claims 1–24 were not shown unpatentable because Petitioner failed to establish the proposed prior-art combinations and the required motivation to combine with a reasonable expectation of success.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “The parties present compelling argument and evidence that one of ordinary skill in the art would include those with experience in ophthalmology, as well as in the research, manufacture, and design of medical optics or medical lasers. Pet. 25; PO Resp. 9–10. The evidence of record also demonstrates that few individuals actually had such comprehensive experience. Rather, teams of individuals with different expertise and various academic degrees (Ph.D.s, B.S.s, and M.D.s) would work together to design laser surgery systems intended to make incisions in the lens of the eye. See, e.g., Ex. 1041 (several authors are M.D.s); Ex. 1042 (the authors’ degrees include Ph.D.s, an M.D., and a B.S.); see also Ex. 1053; Ex. 1054; Ex. 1055; Ex. 2010; Ex. 2019. Thus, we find that the person of ordinary skill in the art would have been either an ophthalmic surgeon or someone with a Ph.D., M.S., or B.S. degree in physics, biomedical engineering, or a related science such as nuclear engineering, having experience in researching, manufacturing, or designing medical optics or medical lasers (e.g., five years of experience for a Ph.D. or more to compensate for lesser degrees), and that such persons would have worked in collaboration with one another to fill any necessary gaps in knowledge (e.g., the engineer would consult the medical doctor on clinical issues or physiology and the medical doctor would consult the engineer on technical issues). This definition marries the two proposed by the parties.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner does not assert that any claim term requires express construction. See Pet. 6 (stating that it “reserves the right to respond to any constructions that [Patent Owner] submits”). Patent Owner does not present any remarks regarding claim construction. See generally PO Resp. On this record, we determine that no claim terms require express construction because it is not essential to our conclusions on patentability. See Nidec Motor., 868 F.3d at 1017 (quoting Vivid Techs., 200 F.3d at 803 (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). To the extent further discussion of the meaning of any claim term is necessary to our decision, we provide that discussion below in our analysis of the asserted grounds of unpatentability.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

    “summarized above, we find that the evidence of record does not support a conclusion that it would have been simple, straightforward, or otherwise routine to convert Swinger’s manual HeNe aiming system and Swinger’s surgeon-identification-of-target-tissue step to a computer-controlled, OCT-guided laser system. Even assuming that a person of ordinary skill in the art would have combined the teachings of Swinger and Baikoff to achieve a laser surgical system incorporating an OCT imaging system, that combination still would not have achieved the required “computer system” of the claims and all of its programmed surgical functionality, particularly, using a computer system to construct an anterior capsulotomy cutting region based on the image data. Petitioner relies on the ability of a person of ordinary skill in the art to configure Swinger’s computer control unit with the missing functionality, thus necessitating an electronic conversion of the steps performed using Swinger’s direct visualization method using a HeNe aiming beam to manually identify a surgical treatment region for laser surgery. Ex. 1039, 34:52–57; Ex. 2088 ¶¶ 55–59, 66. That conversion, however, involves the incorporation of OCT imaging technology as the basis for a computer-controlled system to plan and then implement the planned cataract surgery, two technological leaps that the record fails to show were known or suggested. In particular, the evidence of record does not support a conclusion that OCT was a well-known system used routinely, if at all, in the identification of treatment regions in the lens or lens capsule for cataract surgery, and further does not support a conclusion that a computer-controlled system to plan and to implement a planned cataract surgery in the lens was commonplace or even considered before the invention.” slip op. at 25

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation not foundNot shown unpatentableNot shown unpatentable

    “The evidence of record demonstrates, however, that modifying an existing corneal surgery system to image and perform surgery on the lens was not the simple task asserted by Petitioner. For example, in a patent application filed in November 2009, Petitioner asserted that due to the different depth ranges for the laser’s focus, “laser systems designed for corneal procedures do not offer solution[s] for the considerable challenges of performing surgery on the lens of the eye.” Ex. 2007, 4:65–67, 5:30–36, code (22). Similarly, in a different patent filed in December 2008, Petitioner outlined the various challenges in developing laser surgery systems for creating incisions in the lens, including the difficulty in focusing a laser beam that propagates through regions of the eye with different optical properties and different curvatures. Ex. 2014, 15:51–16:18, code (22). This patent then states: Because of all the described hard challenges, corneal surgical laser systems are qualitatively simpler than lens surgical lasers. This is well supported by the fact that even though corneal surgical systems were suggested about 40 years ago, none have been adapted successfully for lens surgery to date. Id. at 16:13–18. During prosecution of another patent filed in 2008, and in responses to office actions filed in 2012 and 2013, Petitioner argued that a corneal OCT system “simply will not work” on the lens and that it would not have been obvious to modify such an OCT system to image the lens. Ex. 2015, 898, 1591, 1788. This was because OCT systems designed to image the lens would be required to deliver and scan an imaging beam “to a depth ten times bigger and a depth range ten times bigger” than an OCT system designed to image the cornea. Id. at 1591. According to Petitioner, “it is not obvious” to modify an OCT imaging system to achieve a depth and scanning range that is ten times larger than that disclosed in the art. Id. at 898 (“Increasing a system’s performance by an order of magnitude cannot be regarded as obvious.”), 1590–1591. Petitioner’s arguments presented in its own patents and during their” slip op. at 39

  Patent outcomesUS 8,709,001 not shown unpatentable
  Claim construction§ 103 obviousness
  Patents in suitUS 8,709,001
• Alcon Inc. / Alcon Vision, LLC et al. v. Amo Development, LLCNo claims unpatentable
  PTAB · Dec 2, 2022 · IPR2021-00853 · APJ Ryan H Flax · IPR · Final written decision

  Claims 1–3, 5, 6, 8, 12, and 13 were not proven unpatentable because the asserted combinations lacked a persuasive basis for achieving the claimed system with a reasonable expectation of success.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “Petitioner’s proposed definition of the person of ordinary skill in the art appears to be consistent with the level of skill in the art reflected in the prior art of record and the disclosure of the ’725 patent; however, we also agree with Patent Owner that such a definition should be flexible enough to include a person with a lesser academic degree and having experience working in the field, such as an engineer with clinical experience in ophthalmic surgery, as well as also including a medical doctor, such as an ophthalmic surgeon with experience working with medical optics and lasers, and that these people may collaborate. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). Such an expanded definition of the person of ordinary skill in the art, including aspects of both parties’ definitions, is appropriate here, based on our review of the record. Thus, we find that the person of ordinary skill in the art would have been someone with a PhD, MS, or BS degree in physics, biomedical engineering, or a related science such as nuclear engineering, having more or less experience in research, manufacturing, or designing medical optics or medical lasers (e.g., 5 years for a PhD or more to compensate for lesser degrees), or an ophthalmic surgeon, but that such persons would have worked in collaboration with one another to fill any necessary gaps in knowledge (e.g., the engineer would consult the medical doctor on clinical issues or physiology and the medical doctor would consult the engineer on technical issues). This definition marries the two proposed by the parties and is appropriate in view of the record.” slip op. at 17

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner

    “Patent Owner does not ask that this claim language be expressly construed or contest Petitioner’s proposed interpretation. See Resp. 11–15. Although it is not necessary for our final decision in this proceeding to construe this claim language because it is not essential to our conclusions on patentability, as it is uncontested, we adopt as our own Petitioner’s proposed construction of “imaging device configured to acquire point by point image data from locations distributed throughout a volume of a crystalline lens.”” slip op. at 19

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Turning to the disputed term “automatically” in this context, we agree with Patent Owner that the plain meaning of the term “automatically” is that the “control system” can, on its own and without human intervention, perform the subsequently recited step. Resp. 11–15; see also Pet. 10 (Petitioner agreeing this is the plain meaning). This is supported by the Specification, which states, inter alia, that “the entire system is controlled by the controller CPU” and describes alternative embodiments where (1) the system is fully in control and where (2) user input identifies targets. Ex. 1027, 12:23–25, 13:25–44, Figs. 14, 15. However, we also agree with Petitioner that just because the claimed “control system” is configured/programmed to perform (i.e., capable of performing) some tasks “automatically” (i.e., entirely on its own), this does not mean user input (e.g., from a surgeon) must be altogether excluded. Pet. 10–11. In fact, user input must be possible and is within the scope of the independent claim. “By definition, an independent claim is broader than a claim that depends from it, so if a dependent claim reads on a particular embodiment of the claimed invention, the corresponding independent claim must cover that embodiment as well.” Littelfuse, Inc. v. Mersen USA EP Corp., 29 F.4th 1376, 1380 (Fed. Cir. 2022). Here claim 2, requiring automatic target identification, and claim 5, requiring user input on target identification, each depends from claim 1 and illuminates its scope, which must be broad enough to encompass both. Thus, although requiring (in claim 1) that a “control system” can perform certain recited functions, and that some are performed (according to claim 2) “automatically,” that same “control system” must also be capable of allowing a user input on the locations of targets for laser treatment (according to claim 5). Such optional user input required by dependent claim 5 is described in the Specification, which includes embodiments where a surgeon can adjust the size, location, and shape of the treatment pattern, can determine the optimal cutting contours in patients, and can provide “user input” to define targets or adjust computer-defined parameters as necessary. Ex. 1027, 10:55–45; 10:67–11:2, 13:25–55, 13:63–14:2. Regardless, the configuration of independent claim 1’s “control system,” which must be programmed to and capable of performing its own recited steps/functions, is not diminished by the requirements of either dependent claim. Multilayer Stretch Cling Film Holdings, Inc. v. Berry Plastics Corporation, 831 F.3d 1350, 1360 (Fed. Cir. 2016) (“[T]he language of a dependent claim cannot change the scope of an independent claim whose meaning is clear on its face.”).” slip op. at 22

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

    “generally. “The presence or absence of a reasonable expectation of success is . . . a question of fact,” and this “requirement refers to the likelihood of success in combining references to meet the limitations of the claimed invention.” Intelligent Bio-Sys., 821 F.3d at 1366–67. Based on the record, we conclude that, even if it would have been potentially advantageous to in some way incorporate the use of Baikoff’s and Li’s OCT imaging and measuring into Swinger’s system and method for cataract surgery (for example, to replace the use of ultrasound imaging with OCT), we agree with Patent Owner that, other than the (ultimately) conclusory testimony of its witness Dr. Izatt (see, e.g., Ex. 1001 ¶¶ 110, 144, 151, 161, 163–165, 168), there is no persuasive evidence that the person of ordinary skill in the art would have combined these references with the result being a control system configured to (automatically or not in practice) image cataractous eye tissue, identify the targets therein (capsule and lens) to be cut with a laser, and then operate that laser to actually make those cuts based in some part on that imaging. See Resp. 15–34. We credit Dr. Kang’s testimony that, as of the invention, the person of ordinary skill in the art would not have relieved the surgeon of responsibility for identifying cutting regions for laser capsulotomy and cataract surgery (as taught by Swinger), and relegated such task to a computer, which subsequently performs the procedure. Ex. 2087 ¶¶ 36–38, 42, 46, 62–66; see also Ex. 2088 ¶¶ 56–59, 68–71 (Dr. Walter testifying similarly). Dr. Kang takes issue with Petitioner’s positions that Baikoff and Li teach or suggest such reliance on a computer because, according to Dr. Kang, neither Baikoff nor Li (and indisputably not Swinger) teaches using a computer to identify laser cutting regions or to control laser surgery, and, in fact, they suggest reliance on a surgeon to interpret their OCT images to plan a subsequent surgery. See, e.g., Ex. 2087 ¶¶ 36–38, 42, 46, 62–66. We further credit Dr. Kang’s testimony that Petitioner fails to adequately explain, even were the ordinarily skilled artisan intent on combining Baikoff’s and Li’s OCT imaging systems with Swinger’s cataract surgery system, how it would have been accomplished to overcome the “substantial challenges” and achieve the claimed invention. See id. ¶¶ 63– 66; see also Resp. 27–28 (addressing Petitioner’s lack of explanation as to how to implement the combination).19 We agree that, beyond merely suggesting plugging one system into another, Petitioner does not explain how the person of ordinary skill in the art would have programmed Swinger’s computer control system to use Baikoff’s and Li’s OCT imaging systems and tissue recognition and measurement algorithms to determine capsulotomy cutting regions and then implement the planned cutting with a laser, even from a rudimentary perspective. See Pet. 35–40. Indeed, Petitioner concedes:” slip op. at 50

  Patent outcomesUS 9,125,725 not shown unpatentable
  Claim construction§ 103 obviousnesscites Alice · Phillips · KSR · Graham
  Patents in suitUS 9,125,725
• Alcon Inc. / Alcon Vision, LLC et al. v. Amo Development, LLCNo claims unpatentable
  PTAB · Nov 14, 2022 · IPR2021-00841 · APJ Ryan H Flax · IPR · Final written decision

  Claims 1–15 were not shown unpatentable because the asserted combinations failed to establish obviousness, including a reasonable expectation of success.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “Petitioner’s proposed definition of the person of ordinary skill in the art appears to be consistent with the level of skill in the art reflected in the prior art of record and the disclosure of the ’648 patent; however, we also agree with Patent Owner that such a definition should be flexible enough to include a person with a lesser academic degree and having experience working in the field, such as an engineer with clinical experience in ophthalmic surgery, as well as also including a medical doctor, such as an ophthalmic surgeon with experience working with medical optics and lasers, and that these people may collaborate. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). Such an expanded definition of the person of ordinary skill in the art, including aspects of both parties’ definitions, is appropriate here, based on our review of the record. Thus, we find that the person of ordinary skill in the art would have been someone with a PhD, MS, or BS degree in physics, biomedical engineering, or a related science such as nuclear engineering, having more or less experience in research, manufacturing, or designing medical optics or medical lasers (e.g., 5 years for a PhD or more to compensate for lesser degrees), or an ophthalmic surgeon, but that such persons would have worked in collaboration with one another to fill any necessary gaps in knowledge (e.g., the engineer would consult the medical doctor on clinical issues or physiology and the medical doctor would consult the engineer on technical issues). This definition marries the two proposed by the parties and is appropriate in view of the record. B.” slip op. at 17

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “Petitioner asserts that, although dependent claim 12 is indefinite, its language, “to determine one or more axial locations of the anterior capsule of the lens; and or more anterior capsule axial locations,” (emphasis added) should be construed to mean “to determine one or more axial locations of the anterior capsule of the lens (i.e., one or more anterior capsule axial locations).” Pet. 7–8; see also Ex. 1030, 18:46–50 (claim 12). Petitioner’s position is that, as it reads in the ’648 patent, claim 12’s language is “a nonsense phrase,” rendering it indefinite, but that for the purposes of this proceeding it may be understood by the definition set forth above. Pet. 7–8.” slip op. at 19

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “is . . . a question of fact,” and this “requirement refers to the likelihood of success in combining references to meet the limitations of the claimed invention.” Intelligent Bio-Sys., 821 F.3d at 1366–67. Based on the record, we conclude that, even if it would have been potentially advantageous to in some way incorporate the use of Baikoff’s and Li’s OCT imaging and measuring into Swinger’s system and method for cataract surgery (for example, to replace the use of ultrasound imaging with OCT), we agree with Patent Owner that, other than the (ultimately) conclusory testimony of its witness Dr. Izatt (see, e.g., Ex. 1001 ¶¶ 132, 135, 145, 149, 152–159, 459– 462), there is no persuasive evidence that the person of ordinary skill in the art would have combined these references with the result being a control system configured to (automatically or not) image cataractous eye tissue, identify the regions thereof (capsule and lens) to be cut with a laser, and then operate that laser to actually make those cuts based is some part on that imaging. See Resp. 17–28. We credit Dr. Kang’s testimony that, as of the invention, the person of ordinary skill in the art would not have relieved the surgeon of responsibility for identifying cutting regions for laser capsulotomy and cataract surgery (as taught by Swinger), and relegated such task to a computer, which subsequently performs the procedure. Ex. 2087 ¶¶ 61–65. Dr. Kang takes issue with Petitioner’s positions that Baikoff and Li teach or suggest such reliance on a computer because, according to Dr. Kang, neither Baikoff nor Li (and indisputably not Swinger) teaches using a computer to identify laser cutting regions or to control laser surgery, and, in fact, they suggest reliance on a surgeon to interpret their OCT images to plan a subsequent surgery. Id.” slip op. at 45

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

    “We find Petitioner’s case unpersuasive based on Patent Owner’s arguments and the evidence of record. We find that the evidence of record does not support that Swinger, Baikoff, and Li would have been combined by the person of ordinary skill in the art to achieve the claimed invention with a reasonable expectation of success. Specifically, we find that the claimed elements of the invention directed to a control system configured to (1) operate an imaging device to generate image data of a patient’s lens, (2) process that image data to determine an anterior capsule incision scanning pattern, and (3) operate a laser to scan in the scanning pattern and perform an anterior capsule incision as determined in part by the control system based on the image data, are not taught by the cited prior art and would not have been obvious. Ex. 1030, 17:30–51 (claim 1). We address Patent Owner’s respective arguments and our analysis below. “The presence or absence of a reasonable expectation of success is . . . a question of fact.” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1366 (Fed. Cir. 2016). “The reasonable expectation of success requirement refers to the likelihood of success in combining references to meet the limitations of the claimed invention.” Id. at 1367. The evidence of record suggests that the ordinarily skilled artisan would not have had a reasonable expectation of success in achieving the claimed invention based on Swinger’s, Baikoff’s, and Li’s teachings. Further, as our reviewing court has explained, “references to ‘common sense’—” or an ordinarily skilled artisan’s ordinary creativity, “whether to supply a motivation to combine or a missing limitation—cannot be used as a wholesale substitute for reasoned analysis and evidentiary support, especially when dealing with a limitation missing from the prior art references specified.” DSS Tech. Mgm’t, Inc. v. Apple Inc., 855 F.3d 1367, 1374 (Fed. Cir. 2018) (quoting Perfect Web Techs. Inc. v. InfoUSA, Inc., 587 F.3d 1324, 1326 (Fed. Cir. 2009)). Although here Petitioner has not wholly omitted any reasoned analysis or evidence regarding the claimed computer control system programmed to automatically plan a cutting region based on image data and then perform that planned laser-cutting of the lens capsule (and, for some claims, also the lens), this subject matter is not disclosed in any cited art and we find Petitioner’s evidence and reasoning as to why it would have been obvious without such disclosure to be largely conclusory and unpersuasive.” slip op. at 40

  Patent outcomesUS 9,474,648 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,474,648
• Alcon Inc. / Alcon Vision, LLC et al. v. Amo Development, LLCNo claims unpatentable
  PTAB · Nov 7, 2022 · IPR2021-00839 · APJ Sheridan K Snedden · IPR · Final written decision

  Claims 1–20 were not determined unpatentable because the cited combinations did not establish the claimed image guided, computer planned cataract surgery.

  RulingsFinal written decision

  • Skill levelSkill level board ownOther

    “The parties present compelling argument and evidence that one of ordinary skill in the art would include those with experience in ophthalmology, as well as in the research, manufacture, and design of medical optics or medical lasers. Pet. 24; PO Resp. 10–11. The evidence of record also demonstrates that few individuals actually had such comprehensive experience. Rather, teams of individuals with different expertise and various academic degrees (Ph.D.s, B.S.s, and M.D.s) would work together to design laser surgery systems intended to make incisions in the lens of the eye. See, e.g., Ex. 1041 (several authors are M.D.s); Ex. 1042 (the authors’ degrees include Ph.D.s, an M.D., and a B.S.); see also Ex. 1053; Ex. 1054; Ex. 1055; Ex. 2010; Ex. 2019. Thus, we find that the person of ordinary skill in the art would have been either an ophthalmic surgeon or someone with a Ph.D., M.S., or B.S. degree in physics, biomedical engineering, or a related science such as nuclear engineering, having experience in researching, manufacturing, or designing medical optics or medical lasers (e.g., five years of experience for a Ph.D. or more to compensate for lesser degrees), and that such persons would have worked in collaboration with one another to fill any necessary gaps in knowledge (e.g., the engineer would consult the medical doctor on clinical issues or physiology and the medical doctor would consult the engineer on technical issues). This definition marries the two proposed by the parties.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b) (2019). Under this standard, we construe the claim “in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id. Furthermore, we need only construe the claims to the extent necessary resolve the dispute between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Petitioner does not assert that any claim term requires express construction. See Pet. 7 (stating that it “reserves the right to respond to any constructions that [Patent Owner] submits”). Patent Owner does not present any remarks regarding claim construction. See generally PO Resp. On this record, we determine that no claim terms require express construction. See Nidec Motor., 868 F.3d at 1017 (quoting Vivid Techs., 200 F.3d at 803 (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). To the extent further discussion of the meaning of any claim term is necessary to our” slip op. at 12

  • BurdenNot shown unpatentable

    “We have considered Petitioner’s assertions and evidence, summarized above, and agree with Patent Owner that the combination of Swinger, Baikoff, and Li fails to disclose or render obvious a control system configured to generate an anterior capsulotomy scanning pattern based on image data. PO Resp. 18–23. Petitioner relies on Li for this limitation, however, while Li discloses the use of OCT imaging to measure certain dimensions of the anterior chamber of the eye, Li suggests that a person of ordinary skill in the art manually use the measurement data collected by the system. (Ex. 1044, 1; Ex. 2087 ¶¶ 44–46). More specifically, as summarized by Patent Owner: Li does not suggest configuring the control system to do anything at all with the measurements that it makes, much less determine an anterior capsulotomy scanning pattern. Kang [Ex. 2087] ¶¶ 80, 128. To the contrary, Li’s suggestion of using measurements to “improve the fitting of AC-IOL” teaches a [skilled artisan] to manually use the measurement data. Id. Dr. Izatt testified that “in Li, the controller, so to speak, is a human.” Ex. 2057, 207:17–208:7; see also id., 207:20–21 (in Li, “the one who identifies the treatment region is the surgeon”). PO Resp. 19–20 (emphasis removed, alteration in original). That is, Li discloses a system capable of identifying boundaries of certain eye tissue structures, but fails to disclose a controller configured to determine an anterior capsulotomy scanning pattern. Id. at 17 (“Li teaches using its OCT images as a diagnostic tool.”). Thus, while Li discloses the use of OCT to identifying certain boundaries of tissue structures, Li does not disclose any controller configured to process image data for the purposes of determining a scanning pattern for scanning a focal zone of the laser beam for performing anterior capsulotomy as required by the claims.” slip op. at 26

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

    “The problem with Petitioner’s argument based on Leapfrog and the like is that Petitioner’s obviousness challenge does not simply require automating a manual step using commonplace modern electronics, but requires the conversion of one cataract surgery treatment region identification system into another. That conversion involves the incorporation of OCT imaging technology as the basis for a computer-controlled system to plan and implement eye surgery, two technological leaps that the record fails to show was known or suggested. In particular, the evidence of record does not support a conclusion that OCT was a well-known system used routinely, if at all, in the identification of treatment regions in the lens or lens capsule for cataract surgery, and further does not support a conclusion that a computer-controlled system to plan and implement cataract surgery in the lens was commonplace. We recognize that Petitioner directs us to the testimony of Dr. Izatt who opines that a person of ordinary skill in the art would have found it obvious to, for example, use a controller to determine the claimed scanning pattern. Pet. 32–33; Reply 3–5; see also Ex. 1123 ¶ 31 (“Once the anterior capsule is identified, it is a relatively simple process to determine the location to place the capsulotomy.”). Here, however, we agree with Patent Owner that the Petition and supporting testimony fails to provide the requisite reasoned analysis with sufficient evidence to support Petitioner’s position on obviousness. In particular, absent some evidentiary support beyond Dr. Izatt’s and Dr. Tipperman’s opinions that it would have been obvious to program a controller to bridge the gap between the functionality disclosed in Swinger and the required functionality of the challenged claims, we are unwilling to accept this line of reasoning. PO Resp. 27; Sur-Reply 4–7; see also DSS Tech. Mgmt., Inc. v. Apple Inc., 885 F.3d 1367, 1374 (Fed. Cir. 2018) (A skilled artisan’s “common sense” or “common knowledge” can potentially “fill in a missing limitation only when ‘the limitation in question was unusually simple and the technology particularly straightforward.’” (emphasis omitted)).” slip op. at 29

  Patent outcomesUS 9,101,448 not shown unpatentable
  Claim construction§ 103 obviousness
  Patents in suitUS 9,101,448

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.