• Bio-Rad Laboratories, Inc. v. California Institute Of TechnologyNo claims unpatentable
  PTAB · Mar 23, 2026 · IPR2024-01451 · APJ Tawen Chang · IPR · Final written decision

  Claims 1–19 were not shown unpatentable: Larson did not establish the claimed detection in a single sample volume, and the asserted obviousness combinations did not cure the deficiencies.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner states that, “[f]or purposes of this IPR proceeding, PO does not contest Petitioner’s description of qualifications for a person of ordinary skill in the art (POSA) set forth [above].” PO Resp. 23. In view of the above, and because Petitioner’s uncontested description of one of ordinary skill in the art is reasonable and consistent with the ’921 patent and the cited art, we adopt Petitioner’s definition of a POSA for purposes of this Decision, except that we replace the phrase “at least a year of experience in quantitative and/or dPCR and fluorescence-based analyte detection” with “around a year of experience in quantitative and/or dPCR and fluorescence-based analyte detection.” Pet. 9 (emphasis added).13” slip op. at 14

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We begin with “the context in which a term is used in the asserted claim,” which can be “highly instructive.” Phillips, 415 F.3d at 1314. In this case, claim 1 recites that the claimed assay is “capable of unambiguously detecting the presence or absence of each of said at least M analytes, in any combination of presence or absence, in a single sample volume, . . . wherein the analytes are amplified in the single sample 15 In this regard, we note that Petitioner’s claim construction position is not predicated on the collection of droplets being reconstituted into its original, pre-partition form prior to amplification; rather, the droplets remain compartmentalized from each other in the PCR thermal cycling tube. Tr. 65:21–66:9 (Petitioner’s counsel explaining that the droplets do not combine in the PCR thermal cycling tube but, rather, are “suspended in an immiscible fluid and analyzed en masse”). indicates that the first instance of single sample volume, i.e., the single sample volume in which the presence or absence of each M analytes are to be detected, is the antecedent basis for the second instance of “single sample volume,” i.e., the single sample volume in which the analytes are amplified. Thus, as the parties appear to agree, the single sample volume in which amplification takes places must be the same single sample volume in which the presence or absence of analytes are to be detected. We are not persuaded that, when accorded its plain and ordinary meaning, a single sample volume divided into a collection of droplets would be considered the “same” single sample volume prior to its partition.” slip op. at 17

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “With respect to the limitation, “wherein the analytes are amplified in the single sample volume,” Petitioner asserts that “Larson discloses PCR assays that amplify target polynucleotide in a single sample volume, specifically a portion of the reaction mixture that is subsequently partitioned into droplets.” Pet. 31 (emphasis added). There is no dispute that the amplification of the analytes in Larson occurs in the droplets. Larson ¶¶ 6–7 (explaining that “[d]igital PCR (dPCR) is an alternative quantitation method in which dilute sample are divided into many separate reactions” and that “[t]he template is amplified in the droplet for detection”) (emphasis added). Because the claims require that amplification of the analytes be in the same sample volume in which the at least M analytes, in any combination of presence or absence, is unambiguously detected, and because the pre-partition single sample volume is not the same single sample volume as the collection of droplets after partition under our claim construction set forth above, we find Petitioner has not shown, by a preponderance of evidence, that claims 1–10 and 13–19 are anticipated by Larson.17 Tr. 68:12–69:14 (Petitioner’s counsel” slip op. at 27

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Although we agree with Petitioner that Larson contemplates scenarios in which droplets may contain more than one target molecule and does not require the exclusion of such multiple occupancy droplets in all embodiments, we are nevertheless not persuaded Petitioner has shown, based on a preponderance of evidence, that Larson renders obvious an assay capable of unambiguously detecting, in such multiple occupancy droplets, the presence or absence of each of at least M analytes, in any combination of presence or absence, when M is greater than F and F is at least 2.” slip op. at 32

  Patent outcomesUS 11,827,921 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,827,921
• Inergy Technology, Inc. v. Force Mos Technology Co., Ltd.No claims unpatentable
  PTAB · May 16, 2025 · IPR2024-00093 · APJ Grace Karaffa Obermann · IPR · Final written decision

  Claims 1–9 were not proven unpatentable because the asserted references did not establish the claimed epitaxial layer or the required coverage of the trench sidewalls.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner defines a person of ordinary skill in the art as having “a Master’s degree in electrical engineering, and at least two years of relevant work experience in the field of integrated circuit design and manufacturing.” Pet. 13 (citing Ex. 1003 ¶¶ 32–37, 57). Patent Owner does not dispute Petitioner’s definition. PO Resp. 6. We adopt Petitioner’s proposed definition of the level of ordinary skill in the art because it is supported by unopposed declaration testimony and appears to be consistent with the disclosures of the ’634 patent and the asserted prior art references. See Ex. 1001, 1:6–2:33 (describing the invention and related art in terms of integrated circuit design and fabrication); see also Ex. 1006 ¶¶ 1–6 (Hirler); Ex. 1008 ¶¶ 1–37 (Kobayashi); Ex. 1009 ¶¶ 2–29 (Shiraishi). Neither party, moreover, indicates the overall result would change based on a different definition.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “Petitioner argues that “the sidewalls of said trenches in said base layer are covered” should be construed to mean that “the entire sidewalls of” those trenches are covered. Pet. 18–19. We refer to this as “the sidewall limitation.” Petitioner shows persuasively that the disclosure and file history of the ’634 patent support its position on the sidewall limitation. Id. Patent Owner, for its part, observes that, after the filing of the Petition. two District Courts adopted the construction proposed by Petitioner.” PO Resp. 21 (citing Ex. 2010, 6–9; Ex. 2011, 23). Patent Owner also agrees to apply Petitioner’s construction for purposes of this proceeding. Id. We agree with Patent Owner that an express construction of the sidewall limitation is necessary to this Decision, id., and adopt Petitioner’s undisputed definition because it is supported by the record. No other claim term requires express construction for purposes of this Decision.” slip op. at 8

  • BurdenNot shown unpatentable

    “On this record, Petitioner fails to demonstrate that any claim is unpatentable under any ground asserted in the Petition. IV. CONCLUSION For the above reasons, we determine that Petitioner fails to establish by a preponderance of the evidence that claims 1–9 of the ’634 patent are unpatentable.” slip op. at 34

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner

    “Alternatively, even if we set aside that timing issue, Dr. Liu’s bare opinion, advanced for the first time during cross-examination, that an epitaxial layer is “obvious” from Hirler’s disclosure is inadequate to support the challenges. Id. at 24–25. We accord little weight to Dr. Liu’s opinion because it is conclusory. See Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In any event, Petitioner does not meet, on this record, the “high standard” required to establish an inherent disclosure of an epitaxial layer in Hirler. PO Resp. 24.6 Dr. Liu opined for the first time during cross-examination “that it would have been impossible to create Hirler’s more lightly doped n- drift zone layer on top of its more heavily doped n+ substrate layer other than via epitaxy.” Id. at 25 (citing Ex. 2014, 164:16– 165:20). But Patent Owner effectively refutes that proposition with evidence that such a layer “could be created by counter-doping,” even if, as Dr. Liu contends, counter-doping may have been less ideal due to “disadvantageous mobility.” Id. (citing Ex. 2012 ¶ 133; Ex. 2014, 166:15–167:8).” slip op. at 11

  Patent outcomesUS 7,629,634 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,629,634
• Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationNo claims unpatentable
  PTAB · Mar 18, 2025 · IPR2023-01383 · APJ Kimberly Mcgraw · IPR · Final written decision

  Claims 1–5 were not shown unpatentable because Petitioner did not sufficiently establish a reason to modify the asserted prior art.

  RulingsFinal written decision

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “We disagree with Petitioner’s argument because it fails to address Dr. Schubert’s academic and other experience with GaN transistors. Dr. Schubert is currently a tenured full professor in the Department of Electrical Computer, and Systems Engineering at Rensselaer Polytechnic Institute and was previously a tenured full professor in the Department of Electrical and Computer Engineering at Boston University. Ex. 2001, 129. Additionally, Dr. Schubert was the director of Boston University’s Semiconductor Devices Research Laboratory. Ex. 2001, 129. Dr. Schubert persuasively explains that his general expertise is in the field of electrical engineering and applied physics, including semiconductors, processing, and devices and his specific expertise is in the field of semiconductor materials (such as GaN), semiconductor devices, semiconductor integrated circuits, ohmic contacts, Schottky contacts, HEMTs, and optoelectronic devices such as light-emitting diodes (LEDs). Ex. 2001 ¶ 11, App’x A pp.129–137. His experience includes “the design, growth, fabrication, and testing of semiconductor devices as well as the employment of these devices in a variety of applications” and he is “familiar with both the design of such transistors [HEMTs] and the manufacturing processes used for FETs. Ex. 2001 ¶ 11, App’x A, pp. 129–137. He is an author or co-author of numerous text books and articles, and co-inventor of numerous patents, including those dealing with HEMT transistors and GaN devices. Ex. 2001 ¶ 13, App’x A, pp. 129–137. Petitioner fails to present any persuasive argument or evidence that Dr. Schubert’s extensive education and experience regarding GaN transistors is insufficient or lacking such that his testimony should be given little weight. Finally, we disagree with Petitioner’s additional argument that that its expert’s testimony (Dr. Shealy) should be given more weight than Patent Owner’s expert’s testimony (Dr. Schubert) because “[u]nlike Dr. Schubert, Dr. Shealy is one of the pioneer scientists in the field of GaN transistors.” Reply 34 (stating that Dr. Shealy’s research lab built the first GaN HEMT device on silicon in 1999 and citing Ex. 2002, 87:19–238). Obviousness is determined through the lens of a “person of ordinary skill in the art,” not through the lens of a person with extraordinary skill or a pioneer in the field. Given Dr. Schubert’s extensive relevant education and experience, Petitioner does not persuasively explain why Dr. Shealy’s testimony on any specific topic, or his testimony in general, should be given more weight than Dr. Schubert’s.” slip op. at 16

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of a person of ordinary skill in the art (sometimes abbreviated herein as “POSITA”). Graham, , 383 U.S. at 17–18. Petitioner argued that a person of ordinary skill in the art would have had a “at least a four-year degree in electrical engineering, chemical engineering, physics, or material science or a closely related field and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies. Additional education could substitute for professional experience and vice versa.” Pet. 11 (citing Ex 1003 ¶ 69). Patent Owner did not dispute this proposed definition prior to institution. See generally Prelim. Resp. In our Decision on Institution, we adopted Petitioner’s proposal. After institution, Patent Owner asserted a slightly different definition of a POSITA, namely someone who “would have possessed at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” Resp. 17. Relevant graduate education could substitute for the professional work experience. Id. Upon review of the full record, we see no reason to modify, and we thus maintain, the definition of a POSITA applied in our Decision on Institution. We also determine that our decision would be the same under either of the parties’ proposed definitions.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Not reached

    “During the proceeding, the parties also dispute the proper construction of “etching away the doped GaN layer, except a portion of the doped GaN layer beneath the gate contact” as recited in step [1e4] and provided briefing on this issue. Papers 35, 36, 37, 38. Because, as explained below, our determination rests upon Petitioner’s failure to show a sufficient reason to modify the asserted art, which is not dependent upon any particular claim construction, we need not, and do not, address these claim construction issues. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy).” slip op. at 13

  • ExcludeDenied

    “III. PETITIONER’S MOTION TO EXCLUDE EXHIBIT 2008 Petitioner filed a Motion to Exclude (Paper 25, “Mot.”) Exhibit 2008, which is a hearing transcript from the parallel ITC investigation. Mot. 1. Because we do not rely upon Exhibit 2008 in our Decision, we dismiss Petitioner’s motion as moot.” slip op. at 47

  Patent outcomesUS 8,404,508 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 8,404,508
• Intel Corporation v. Besang Inc.No claims unpatentable
  PTAB · Dec 11, 2024 · IPR2023-00991 · APJ Jon B Tornquist · IPR · Final written decision

  The Board held claims 1 and 13–17 not unpatentable, finding the asserted obviousness grounds deficient in claim limitations or motivation to combine.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “The parties proposed definitions differ in that Petitioner would permit a degree in “materials science” and require three years, as opposed to two years, of relevant experience. Compare Pet. 9 with PO Resp. 14. On this record, we adopt Patent Owner’s proposed definition, as it is more consistent with the prior art of record and the disclosures of the ’702 patent. We note, however, that neither party contends that the outcome of this case depends on the slight differences in the proposed definitions of a person of ordinary skill in the art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate. Pet. 11–12. First, the plain language of the claim does not require merely a “layer” having a plurality of vertically oriented semiconductor memory cells, but rather “a stackable add-on layer” having a plurality of vertically oriented semiconductor memory cells; that plurality is bonded to the dielectric layer. Ex. 1001, 12:29–32. A construction that gives meaning to all words of the claim is preferred. Merck & Co., Inc. v. Teva Pharm. USA, Inc., 395 F.3d 1364, 1372 (Fed. Cir. 2005) (“A claim construction that gives meaning to all the terms of the claim is preferred over one that does not do so.”).” slip op. at 12

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “As discussed above, we do not understand a “stackable add-on layer” to include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. Pet. 16, 29 n.11, 51 (“In Lee, each level 3104 is deposited on the underlying level of array 3101.”). Therefore, Petitioner has not shown that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Analysis: Claims 14–17 Claims 14–17 each depend, directly or indirectly, from claim 13. Petitioner’s arguments with respect to these claims do not remedy the deficiencies noted above with respect to claim 13. Pet. 31–41. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14–17 would have been obvious over Lee.” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Petitioner has not demonstrated that Aspar would improve Lee, would solve a problem in Lee, and that Petitioner is proposing to use Aspar in a way that is not disclosed in the reference. PO Resp. 49–50 (citing Ex. 2029 ¶¶ 153–162); Tr. 57:24–58:12; Pet. 61; KSR, 550 U.S. at 417 (asking whether a technique “would improve similar devices in the same way”), 420 (asking whether there was a known problem in the art), 421 (asking whether one of ordinary skill in the art had reason to “pursue the known options”); Intel, 61 F.4th at 1381 (explaining that obviousness may be demonstrated by showing that there was a known problem in the art (“cache coherency in multiprocessor systems”) and that a person of ordinary skill in the art would recognize that that the prior art solution to this problem (“global segmented secondary cache”) would improve the system of another prior art reference). Petitioner does not persuasively show that there was any known problem in the art with respect to Lee or its monolithic method of constructing memory arrays. Nor does Petitioner provide persuasive argument or evidence that Aspar’s wafer bonding would improve Lee’s memory device.10 For example, Petitioner states in a conclusory fashion that Aspar would address the known problem of “fabricating 3D structures,” but does not explain what those problems were or why Lee fails to solve them. Pet. 61. Dr. Sechen’s testimony merely parrots the Petition, providing no further analysis or explanation of what problem might exist in Lee when fabricating its 3D structures. Ex. 1003 ¶ 212. The Petition notes that Aspar transfers “thin layers of very good thickness homogeneity and with a high crystalline quality,” but the Petition never asserts that Lee’s direct deposition method fails to provide these same or similar qualities. Pet. 60–61.” slip op. at 27

  Patent outcomesUS 7,378,702 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,378,702
• Micron Technology, Inc. / Micron Semiconductor Products, Inc. et al. v. Besang Inc.No claims unpatentable
  PTAB · Nov 13, 2024 · IPR2023-00900 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 13–17 were not shown unpatentable: Lee-based grounds fail on the stackable add-on layer limitation, and Watanabe-based grounds fail on nonvolatile memory, enablement, or motivation to combine.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “meaning in the art. See Irdeto Access, Inc. v. Echostar Satellite Corp., 383 F.3d 1295, 1300 (Fed. Cir. 2004) (stating that, absent an accepted meaning in the art, “we construe a claim term only as broadly as provided for by the patent itself”). Thus, we must attempt to discern the meaning of this term from the claim language itself and from the remainder of the intrinsic record. See Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate.” slip op. at 10

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “As discussed above, we construe “stackable add-on layer” to not include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. See Pet. 52 (asserting that in Lee “the layers of the array are directly deposited on the layers of each underlying level, and the array is deposited on the interlayer insulating layer formed over a substrate”); see also id. at 70 (“Lee discloses forming vertical memory devices through layer-by-layer sequential deposition on the substrate . . . .”). Therefore, Petitioner does not show that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Claims 14 and 15 Claims 14 and 15 depend from claim 13. Ex. 1001, 12:35–42. Petitioner’s arguments for these claims do not remedy the deficiencies noted above with respect to independent claim 13. Pet. 54–59. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14 and 15 would have been obvious in view of Lee alone. E. Claims 16 and 17 over Lee and Endoh Petitioner contends the subject matter of claims 16 and 17 would have been obvious over the combined disclosures of Lee and Endoh. Pet. 59–69. Petitioner’s arguments with respect to these claims, however, do not remedy the deficiencies noted above with respect to Lee and its monolithic, sequentially deposited memory array. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 16 and 17 would have been obvious over Lee and Endoh.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “combined Lee and Watanabe to achieve improved integration density. Pet. 71. Petitioner concedes, however, that the benefits of Lee’s design related to 3-D integration and improved integration density would be obtained if Lee’s memory structures are formed using either Lee’s monolithic construction method or Watanabe’s alternative stacking method. Pet. Reply 13–14 (citing Ex. 1041 ¶ 34). Thus, we are not persuaded that improved integration density provides a sufficient rationale for Petitioner’s combination of Lee’s memory device and Watanabe’s stacking method. Petitioner argues that Watanabe’s stacking method “improves the accuracy of the wiring” because the wiring is made “for each planar member.” Pet. 72 (citing Ex. 1005, 6:1–3). Watanabe also states that its disclosed methods provide “a low interconnection wire resistance.” Ex. 1005, 6:20–23. Petitioner does not, however, explain sufficiently how Watanabe’s stacking method would improve Lee’s device. For example, Petitioner does not address whether the alleged wiring benefit already existed in Lee’s monolithic array or explain how this benefit would also apply to Lee’s particular memory array, which differs in construction and elements from Watanabe’s device. This diminishes Petitioner’s benefits-based motivation to combine arguments. In general, a petitioner need not demonstrate that a particular alternate method would improve a prior art device in order to show a motivation to combine. Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380–81 (Fed. Cir. 2023); see Pet. Reply 20 (citing Intel). But here, Petitioner affirmatively invokes improvement of Lee’s device as a reason for the combination, and we must evaluate Petitioner’s contention. Moreover, any relative lack of improvement or benefits must be weighed against any problems the alternative method would introduce. See Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 795–96 (Fed. Cir. 2021) (noting that simultaneous advantages and disadvantages to a proposed combination must be analyzed to determine whether the disadvantages “outweighed any reason to combine”). Here, as discussed above in more detail with respect to the ground based on Watanabe, the evidence shows that one of ordinary skill in the art would have expected Watanabe’s bonding temperature of 900– 1000° C to damage the electronic devices in an underlying substrate. Ex. 2029 ¶¶ 75–76; Ex. 2028, 123:13–124:7; Ex. 2027, 715. The expected damage to Lee’s device, when balanced against the limited evidence of a benefit to the combination,7 outweighs the reason to combine Lee and Watanabe set forth in the Petition. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious over Lee and Watanabe. 2. Analysis – Claims 14 and 15 Claims 14 and 15 both depend directly from independent claim 13. Ex. 1001, 12:35–42. Petitioner’s arguments with respect to claims 14 and 15 do not remedy the deficiencies noted above with respect to independent claim 13. Pet. 73. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that these claims would have been obvious over Lee and Watanabe.” slip op. at 40

  • Expert testimonyPatent owner expert creditedOther

    “We credit the testimony of Dr. Przybylski that one of ordinary skill in the art would have understood that Watanabe’s stacked structure would be severely impacted if bonded at a temperature above 900° C, as disclosed in Watanabe. Ex. 2029 ¶¶ 76–77. Dr. Przybylski’s opinion is supported by Dr. Lee’s testimony (Ex. 2028, 123:13–124:7, 125:6–126:7), as well as Watanabe (Ex. 1005, 6:6–14) and Batude (Ex. 2027, 715). As further discussed below, we find that Petitioner has not rebutted Patent Owner’s showing of nonenablement, and Patent Owner has carried its burden to demonstrate that Watanabe was not enabled for bonding temperatures of 900–1000° C, as of the 2004 filing date of the ’702 patent.” slip op. at 32

  Patent outcomesUS 7,378,702 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,378,702
• Nespresso USA, Inc. v. K-Fee System GMHBNo claims unpatentable
  PTAB · Apr 10, 2024 · IPR2022-01574 · APJ James J Mayberry · IPR · Final written decision

  Claims 1–13 were not shown unpatentable because the asserted combinations did not teach or render obvious the claimed groove entirely to the side of the chamfered mandrel.

  RulingsFinal written decision

  • Skill levelSkill level board ownPatent owner expert discountedDecided for patent owner

    “The Federal Circuit has made clear that, “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case—like for claim construction, validity, or infringement—a witness must at least have ordinary skill in the art.” Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022) (emphasis added). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377. The Federal Circuit reasons that “‘[a]dmitting testimony from a person . . . with no skill in the pertinent art serves only to cause mischief and confuse the factfinder.’ . . . That testimony would ‘amount[ ] to nothing more than advocacy from the witness stand.’” Id. (quoting Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362, 1364–65 (Fed. Cir. 2008)). possesses at least the level of ordinary skill in the art. Our level of ordinary skill in the art requires a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier. Patent Owner does not persuasively account for how Dr. Howle’s experience, extensive as it may be, includes five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier. Cf. Kyocera, 22 F.4th at 1376 (“Dr. Pratt has advanced degrees in engineering and extensive experience in the design and manufacture of fastener driving tools. But he lacks experience in power nailer design.”).” slip op. at 21

  • Expert testimonyPatent owner expert discountedDecided for petitioner

    “The Federal Circuit has made clear that, “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case—like for claim construction, validity, or infringement—a witness must at least have ordinary skill in the art.” Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022) (emphasis added). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377. The Federal Circuit reasons that “‘[a]dmitting testimony from a person . . . with no skill in the pertinent art serves only to cause mischief and confuse the factfinder.’ . . . That testimony would ‘amount[ ] to nothing more than advocacy from the witness stand.’” Id. (quoting Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362, 1364–65 (Fed. Cir. 2008)). possesses at least the level of ordinary skill in the art. Our level of ordinary skill in the art requires a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier. Patent Owner does not persuasively account for how Dr. Howle’s experience, extensive as it may be, includes five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier. Cf. Kyocera, 22 F.4th at 1376 (“Dr. Pratt has advanced degrees in engineering and extensive experience in the design and manufacture of fastener driving tools. But he lacks experience in power nailer design.”).” slip op. at 21

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Based on the information above, we conclude that the limitation “a groove that is laterally offset from the chamfered mandrel” requires the groove to be entirely to the side of any part of the mandrel. This construction is consistent with the words of the claim—the claim states that the groove is laterally offset from, or to the side of, the chamfered mandrel, not merely offset from a portion of or the centerline of the mandrel. This construction is also consistent with the one embodiment describing the relationship between the mandrel and groove containing the seal, which depicts the groove entirely to the side of the chamfered mandrel. We do not accept Mr. Jobin’s testimony that laterally offset is determined relative to the centerline of an object. Neither the intrinsic record nor other extrinsic evidence provides support for Mr. Jobin identifying the centerline of an object as the reference point for determining if a point is laterally offset from the object.” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We do not agree with Petitioner that Yoakim teaches a groove that is laterally offset from the chamfered mandrel. As we indicated in our claim construction section, we construe the claim term to require the groove to be entirely to the side of any part of the mandrel. We agree with Patent Owner that, as depicted in Yoakim’s Figure 35, the alleged groove is not entirely to the side of any part of the mandrel. See Pet. 69; see also Pet. Reply 19 (showing the alleged groove, in red, including a portion over the chamfered mandrel); PO Resp. 55 (same). Even if Petitioner’s position is that all of the groove must be to the side of the centerline of the mandrel, Petitioner fails to prove that Yoakim teaches such a structure. As seen in Petitioner’s illustration at page 19 of Petitioner’s Reply (reproduced above), a small portion of the groove (which Petition colorizes in red) is to the left of the centerline (shown in green). See Pet. Reply 19.” slip op. at 40

  Patent outcomesUS 11,254,491 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,254,491
• 3M Company v. Bay Materials, LLCNo claims unpatentable
  PTAB · Jan 16, 2024 · IPR2022-01214 · APJ Grace Karaffa Obermann · IPR · Final written decision

  Claims 1–4, 7–11, and 13 were not shown unpatentable because Petitioner did not establish the flexural-modulus limitation over Hinz and the Durasoft data sheets, with or without Sun.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “The parties disagree about the appropriate definition of the ordinarily skilled artisan and, in particular, whether that artisan would have had experience or familiarity with processing “thermoformable polymer sheets” to form “orthodontic and dental appliances.” Resp. 8; see Pet. 10–11 n.1 (disagreeing with that proposition). We agree with Patent Owner for the following reasons.” slip op. at 8

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner

    “B. Conflicting Opinion Testimony Petitioner’s own witness, Dr. Giacomin, opines that an ordinarily skilled artisan “would have been familiar with various machines and methods that would have enabled the thermoforming of multilayer dental sheets into shapes that conform with the teeth (i.e., creating a dental appliance).” Ex. 1002 ¶ 25. Nonetheless, Petitioner does not contest Patent Owner’s evidence that Dr. Giacomin himself lacks that qualification. Compare Resp. 9–10 (citing Ex. 1002 ¶¶ 1–9, 17 & n.1), with Reply (nowhere contesting that evidence). Petitioner also leaves uncontested Patent Owner’s evidence that Dr. Osswald, by contrast, possesses “the required experience” with dental appliances, including thermoforming processes for their manufacture. Compare Resp. 10 (citing Ex. 2006 ¶¶ 2–8; Ex. 2007), with Reply (nowhere contesting that evidence). Dr. Giacomin possesses excellent qualifications in the field of polymer rheology, but on this record, he demonstrates no, or inadequate, familiarity or experience with methods of thermoforming dental appliances from polymeric materials, which by his own admission is a minimum qualification of the hypothetical person of ordinary skill in the art. Ex. 1002 ¶¶ 1–11 (statement of qualifications), App’x A (curriculum vitae). Patent Owner’s witness, Dr. Osswald, by contrast, has “experience with polymer materials used in dental appliances” and “shaping operations, including thermoforming” processes for such applications. Ex. 2006 ¶¶ 5, 6. Against that backdrop, where the two witnesses’ opinions differ about the level of ordinarily skill in the art of thermoforming processes for dental appliances at the time of the invention, we credit Dr. Osswald’s opinions over those of Dr. Giacomin. We take note, moreover, that Dr. Osswald’s opinions would not change under Petitioner’s somewhat different definition of the level of ordinary skill in the art. Ex. 2006 ¶ 14.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “C. Claim Construction Claim terms are given their ordinary and customary meaning, as understood by one of ordinary skill in the art in the context of the entire disclosure. In re Translogic Tech., Inc., 504 F.3d 1249, 1257 (Fed. Cir. 2007). We construe only terms in controversy and then only to the extent necessary to resolve the controversy. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017). No claim term requires express construction for purposes of this Decision.” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “In the absence of explanation by Petitioner, we are left to wonder why either of those two ranges reported in Sun would have been recognized as applicable, without modification, to the three-layer dental splint of Hinz. Starting with a commercially-available, two-layer sheet of hard-soft PC-TPU or hard-soft PETG-TPU thermoplastic polymers, Hinz bonds a third layer, consisting of hard PC or hard PETG, to the soft TPU layer of the two-layer material by a process of thermoforming. No prior art reference explains how that process would have been understood to affect the overall flexural modulus of the resulting three-layer, hard-soft-hard composition. Petitioner does not supply an adequate reason for combining Sun’s preferred flexural modulus range, reported for Sun’s dental appliances at a temperature of 23˚ C, to dental splints formed by Hinz from fundamentally different polymers and a fundamentally different process. See Pet. 65–68 (entirety of four-page analysis on this ground); Resp. 32–38; Sur-reply 7–14 (well-supported explanation of those fundamental differences); Reply 8–16 (Petitioner’s unpersuasive responsive positions). The flexural modulus of Sun’s dental appliance not only is temperature dependent but also varies with the flexural strength of the polymeric material at hand. Ex. 1018 ¶ 12. Too late in the Reply, Petitioner raises fact-intensive reasons why those differences would not have mattered to an ordinarily skilled artisan. Reply 8–16. In any event, we agree with Patent Owner that Petitioner glosses over “[f]undamental differences” between the polymers and processes of Sun and Hinz, differences that “are central to [the] motivation to combine inquiry” and undercut Petitioner’s view that an ordinarily skilled artisan would have understood either of Sun’s flexural modulus ranges to apply, without modification, to Hinz’s polymers and process. Resp. 33 (quoting Adidas AG v. Nike, Inc., 963 F.3d 1355, 1359 (Fed. Cir. 2020)) (first alteration in original); see Sur-reply 8–16 (Patent Owner’s persuasive arguments and evidence on point). The ground based on Sun is deficient for the above reasons.” slip op. at 25

  Patent outcomesUS 10,946,630 not shown unpatentable
  Claim construction§ 103 obviousnesscites Graham
  Patents in suitUS 10,946,630
• Markforged Inc. v. Continuous Composites, Inc.No claims unpatentable
  PTAB · Sep 26, 2023 · IPR2022-00679 · APJ Sheldon M Mcgee · IPR · Final written decision

  Claims 1–12, 20, and 21 were not proven unpatentable; the asserted obviousness grounds failed for insufficient motivation to combine, teaching away, or missing claim limitations.

  RulingsFinal written decision

  • Adverse judgmentAdverse judgmentOther

    “Patent Owner statutorily disclaimed claims 13–19 on July 25, 2023, rendering Petitioner’s Grounds 4, 9, and 10 moot. Ex. 2008. Thus, our Final Written Decision does not address Petitioner’s Grounds 4, 9, and 10. The Board heard oral arguments in an in-person hearing conducted on July 27, 2023. See Paper 23.” slip op. at 4

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA”) would have had a master’s or bachelor’s degree in mechanical engineering, materials science, or a related degree, and either at least 3–5 years of experience (with a master’s degree), or at least 5–6 years of experience (with a bachelor’s degree), in composite materials or additive manufacturing. Pet. 13–14 (citing Ex. 1002 ¶ 36). Patent Owner states that it “does not agree that Petitioner’s proposed level of skill in the art accurately reflects the level of ordinary skill in the art as of the priority date . . . [, but r]egardless [of] the level of skill, . . . the Petition does not show the challenged claims are unpatentable.” Resp. 14–15. Patent Owner does not propose a different level of skill in the art. See id. at 15 (“Patent Owner reserves the right to propose a level of ordinary skill in the art later in this proceeding, or in other proceedings.”). On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). Although a more specific definition is not necessary, we adopt Petitioner’s proposed definition because, on this record, it is consistent with the disclosures of the asserted prior art references. Neither party, however, advances information explaining how or why the result in this case would change based on the level of ordinary skill determined by the Board.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner advances no specific construction of any claim term, but rather proposes that “claim terms should be given their plain and ordinary meaning.” Pet. 14. Patent Owner asserts that the term “anchor” should be construed according to its plain and ordinary meaning, which, according to Patent Owner, is “contact to which the path of composite material is adhered to enable pulling of the path.” Resp. 15 (citing Ex. 2006, 2, 53). Petitioner responds that “[i]n the parallel litigation, the Court has construed ‘anchor point’ and ‘anchor’ as ‘a contact point to which the path is affixed and that serves as an origin point for the formation of the path.’” Reply 3. On the complete record, we determine that no claim term needs an express construction to resolve the controversy. C. GROUND 1 – ALLEGED OBVIOUSNESS OF CLAIMS 20 AND 21 OVER LIPSKER” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “combining multiple embodiments from a single prior art reference (Resp. 31), i.e., “there must be a motivation to make the combination and a reasonable expectation that such a combination would be successful, otherwise a skilled artisan would not arrive at the claimed combination.” In re Stepan, 868 F.3d 1342, 1346 n.1 (Fed. Cir. 2017). On this record, Petitioner fails to provide any such motivation to combine the embodiment in Lipsker’s Figure 2 with those of Figures 4A, 4B, 4C, and 5 to arrive at the subject matter of claim 20. Pet. 23–31. Rather, Petitioner merely points to the disparate embodiments of Figures 2, 4A, 4B, 4C, and 5 and portions of Lipsker’s disclosure pertaining to those embodiments, and asserts that Lipsker “discloses” the individual limitations recited in claim 20. See, e.g., id. at 25 (Petitioner, relying on Figure 2, asserting that “Lipsker discloses the preamble of Claim 20”), 27 (Petitioner, relying on Figure 5, asserting that “Lipsker discloses Element 20[a]”), 28 (quoting Lipsker’s descriptions of wire and adhesive dispensed separately as depicted in Figure 2, and asserting “Lipsker discloses Element 20 [c]”), 29 (pointing to Figures 4A, 4B, and 4C and asserting “Lipsker discloses Element 20[d]”). Pointing to disparate embodiments without providing a sufficient motivation to combine them is not enough to establish the obviousness of claim 20 as a whole. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007) (holding that a claim “composed of several elements is not proved obvious merely by demonstrating that each of its elements was, independently, known in the prior art”).” slip op. at 14

  Patent outcomesUS 10,744,708 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 10,744,708
• Samsung Electronics Co., Ltd. v. Lynk Labs, Inc.No claims unpatentable
  PTAB · May 25, 2023 · IPR2022-00101 · APJ Scott Raevsky · IPR · Final written decision

  Claims 1–7, 11, 12, and 14 were not shown unpatentable: the asserted obviousness combinations failed to establish required LED voltage matching or a clear, workable combination.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We are persuaded that Patent Owner’s proposal is more consistent with the problems and solutions in the ’583 patent and prior art of record. We agree that Petitioner’s proposal is overbroad in that it encompasses artisans without LED circuit design experience (“and two or more years of experience with LED devices and/or related circuit design . . .” (emphasis added)). Patent Owner’s definition, in contrast, requires “two or more years of experience with LED devices and related LED circuit design.” We therefore adopt Patent Owner’s definition of the level of skill, but we note that the outcome here would not have changed had we adopted Petitioner’s level of skill.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “preliminarily agreed with Patent Owner that “substrate” may mean “a surface where ‘LEDs, capacitors and/or resistors are formed or mounted.’” Pet. 7; Dec. 19 (quoting Prelim. Resp. 22). We instructed the parties to address the meaning of “substrate” more fully at trial. Dec. 19–20 n.13. Post-institution, the parties propose the following competing constructions for the term “substrate”:” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “(2) Our analysis We agree with Patent Owner. Patent Owner’s plain reading of limitation 1(c) is correct, and under this reading, the combination of Shackle and Birrell fails to disclose or suggest limitation 1(c). Limitation 1(c) states in part: “at least one LED circuit having any number of LEDs . . . needed to approximately match the forward voltage drop of a first input voltage to the LED driver.” Ex. 1001, 27:22–25 (emphasis added). We have omitted the language “connected in series or series parallel” to highlight the grammatical relationship between the noun phrase “any number of LEDs” and the verb phrase “needed to approximately match.” The plain reading of this limitation is that the at least one LED circuit has any number of LEDs needed to approximately match the forward voltage drop of the LED driver input. Petitioner’s reading, that “the at least one LED circuit,” rather than “any number of LEDs,” must approximately match the forward voltage drop of the LED driver input, is strained and not grammatically plausible. See Reply 1–3. Petitioner does not assert there is an express disclaimer or disavowal in the specification that supports its position; Petitioner instead relies on examples disclosed in the specification to support its faulty interpretation of limitation 1(c). See Reply 2–3. These arguments are unpersuasive. It is axiomatic that we must not “limit[] the claimed invention to preferred embodiments or specific examples in the specification.” Williamson v. Citrix Online, LLC, 792 F.3d 1339, 1346–47 (Fed. Cir. 2015). Not only that, but Petitioner’s citations to the specification better support Patent Owner’s position. In Petitioner’s view, the specification requires other non- LED components to be combined with one or more LEDs to “appropriately match the voltage.” Reply 2. The main example Petitioner relies on describes 38 LEDs having a total voltage drop of 114 V in a circuit with a bridge rectifier having a 6 V voltage drop. Id. at 2–3 (citing Ex. 1001, 16:64–17:7). Yet the 114 V voltage drop of the LEDs alone “approximately matches” the input voltage of 120 V, without the contribution of the bridge rectifier (6 V). Id. Indeed, 114 V out of 120 V is a 95% match. Thus, this example supports Patent Owner’s view that it is the voltage drop of the LEDs themselves, not the LED circuit as a whole, that must approximately match the LED driver input. See Sur-reply 6–7.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “combination. The first is that the proposed combination is not at all clear. Although Petitioner need not propose a bodily incorporation of different embodiments, Petitioner must provide a “reasoned analysis” explaining what the combination is. See DSS Tech. Mgmt., Inc. v. Apple Inc., 885 F.3d 1367, 1377 (Fed. Cir. 2018); In re Keller, 642 F.2d 413, 425 (CCPA 1981); see also Kinetic Concepts, Inc. v. Smith & Nephew, Inc., 688 F.3d 1342, 1368 (Fed. Cir. 2012) (“We must be careful not to allow hindsight reconstruction of references to reach the claimed invention without any explanation as to how or why the references would be combined to produce the claimed invention.”) (citation omitted). But the Petition never explains how or where Piepgras’s glass substrate would be combined with Piepgras’s alleged flexible substrate, the rope light of Figure 31. At most, Petitioner suggests incorporating the illumination device 500 of Figure 42 in the rope light of Figure 31. Pet. 48 (“Piepgras provides for configurations where a reflective platform (reflective substrate) mounts lighting system 500 in a manner applicable generally to the inventions of Piepgras . . ., and thus including the rope lighting application discussed above.”). As for the glass substrate, Petitioner merely states that “a POSITA would have found it predictable to configure the Shackle-Piepgras device to implement a flexible substrate mounted to the glass substrate, wherein at least one of the plurality of LED packages is mounted to the flexible substrate.” Id. (citing Ex. 1002 ¶ 150). This vague statement just parrots the claim language and does not explain anything about how the glass substrate would be included in the combination.” slip op. at 28

  Patent outcomesUS 10,750,583 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,750,583
• Sigray, Inc. v. Carl Zeiss X-Ray Microscopy, Inc.No claims unpatentable
  PTAB · May 22, 2023 · IPR2022-00218 · APJ Elizabeth M Roesel · IPR · Final written decision

  Claims 1–15 were not shown unpatentable because the prior art did not establish the claimed projection magnification or scintillator; the revised contingent motion to amend was dismissed as moot.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We determine that the level of ordinary skill in the art, as articulated by Patent Owner, more accurately reflects the subject matter of the ’704 Patent and the asserted prior art than does Petitioner’s articulation. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself reflects an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). Petitioner does not explain how “control theory” and “applied mathematics” (Pet. 16) relate to the subject matter of the ’704 Patent and the asserted prior art, and Petitioner’s reference to requisite level of skill. Furthermore, whereas Petitioner requires a POSITA to have “x-ray and computing imaging experience” (id.), Patent Owner more particularly specifies “x-ray microtomography experience” (PO Resp. 5), which is the field of art for the ’704 Patent, as well as many of the asserted prior art references. Ex. 1001, code (54) (“High resolution direct-projection type x-ray microtomography system using synchrotron or laboratory-based x-ray source”); Ex. 1007 (discussing X-ray microcomputed tomography); Ex. 1008 (discussing X-ray nanotomography and microtomography); Ex. 1010, code (54) (“Method and apparatus for utilizing an electro-optic detector in a microtomography system”); Ex. 1011 (title: “Three-dimensional X-ray Microtomography”). For these reasons, we apply Patent Owner’s definition of a POSITA. Even if we applied Petitioner’s definition of a POSITA, however, the outcome would be the same because our resolution of the controversy does not turn on the differences between the parties’ contentions about level of ordinary skill in the art.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “In an inter partes review, we apply the same claim construction standard as would be used by a district court to construe a claim in a civil action involving the validity or infringement of a patent. 37 C.F.R. § 42.100(b). Under that standard, claim terms are given their ordinary and customary meaning, as would have been understood by a person of ordinary skill in the art at the time of the invention, in light of the language of the claims, the specification, and the prosecution history of record. Id.; Phillips v. AWH Corp., 415 F.3d 1303, 1312–19 (Fed. Cir. 2005) (en banc); Thorner v. Sony Comput. Entm’t Am. LLC, 669 F.3d 1362, 1365–66 (Fed. Cir. 2012). (“all claim terms should receive their plain and ordinary meaning”); PO Resp. 5 (applying the same constructions as Petitioner). We determine that no claim term requires express construction for purposes of resolving any controversy between the parties. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 10

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner

    “On balance, we find that the testimony of Drs. Bentley and Arce about Jorgensen is more credible than Dr. Kia’s testimony, which is often conclusory and insufficiently supported by the evidence. Drs. Bentley and Arce do a better job of explaining and reconciling Jorgensen’s varying descriptions of the X-ray beam than does Dr. Kia. For example, although Dr. Kia relies on Jorgensen’s repeated references to a “cone-beam,” we find that Petitioner’s evidence does not outweigh the explanations provided by Drs. Bentley and Arce, particularly in view of Jorgensen’s description of the X-ray beam as “collimated” and “shielded by a lead-wrapped brass tube.” See II.D.2.d. and e., supra. Even if we consider Petitioner’s improper new reply argument about filling the CCD, we find that argument insufficient and does not outweigh Patent Owner’s unrebutted evidence about CCD pixel size. See II.D.2.f. and g., supra. In sum, viewing the record as a whole, we find that Petitioner has not shown persuasively that Jorgensen inherently discloses projection magnification within the claimed range.” slip op. at 38

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureNot shown unpatentableInherency not foundNot shown unpatentable

    “standard.” Amgen Inc. v. Sandoz Inc., No. 2022-1147, 2023 WL 2994166, at *10 (Fed. Cir. Apr. 19, 2023). “Inherency . . . may not be established by probabilities or possibilities.” Oelrich, 666 F.2d at 581. “The mere fact that a certain thing may result from a given set of circumstances is not sufficient.” Id. (emphasis added). Rather, the patent challenger must “show that the natural result flowing from the operation as taught would result in the performance of the questioned function.” Id.; see PersonalWeb Technologies, LLC v. Apple, Inc., 917 F.3d 1376, 1382–83 (Fed. Cir. 2019) (determining that the Board’s reliance on inherency was improper because the structure relied upon to meet a claim element “does not necessarily exist” in the reference). As discussed above, it is undisputed that there can be no projection magnification unless the X-ray beam is diverging, and there is a vigorous dispute about whether Jorgensen teaches a diverging X-ray beam. See negatively impacted by Petitioner’s and Dr. Kia’s admittedly incorrect interpretations of Jorgensen’s disclosures concerning “projected at a 4° angle” and “the X-ray beam geometry is used to achieve magnification.” Ex. 1007, H1104; see II.D.2.b. and c., supra. On balance, we find that the testimony of Drs. Bentley and Arce about Jorgensen is more credible than Dr. Kia’s testimony, which is often conclusory and insufficiently supported by the evidence. Drs. Bentley and Arce do a better job of explaining and reconciling Jorgensen’s varying descriptions of the X-ray beam than does Dr. Kia. For example, although Dr. Kia relies on Jorgensen’s repeated references to a “cone-beam,” we find that Petitioner’s evidence does not outweigh the explanations provided by Drs. Bentley and Arce, particularly in view of Jorgensen’s description of the X-ray beam as “collimated” and “shielded by a lead-wrapped brass tube.” See II.D.2.d. and e., supra. Even if we consider Petitioner’s improper new reply argument about filling the CCD, we find that argument insufficient and does not outweigh Patent Owner’s unrebutted evidence about CCD pixel size. See II.D.2.f. and g., supra. In sum, viewing the record as a whole, we find that Petitioner has not shown persuasively that Jorgensen inherently discloses projection magnification within the claimed range.” slip op. at 37

  Patent outcomesUS 7,400,704 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,400,704

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.