• Fluidmaster, Inc. v. Danco, Inc.All claims unpatentable
  PTAB · Mar 11, 2026 · IPR2024-00635 · APJ Meredith C Petravick · IPR · Final written decision

  The majority held claims 1–14 unpatentable under §103 over Guoxin, Ho, and the Quick Connection Art; one judge dissented as to claims 8, 9, 12, and 13.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “A person of ordinary skill in the art (“POSITA”) with respect to the subject matter of the ’698 patent at the time of the priority date, March 11, 2004, would have had an undergraduate degree in mechanical engineering, or other technical training in product design or equivalent work experience. This person would also possess at least one year of experience in developing and/or evaluating mechanical aspects of fluid systems. I consider myself a person of ordinary skill in the art under this definition. Ex. 1004 ¶ 28. Patent Owner argues: A POSITA in the field to which the ’698 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or research experience in the design or development of toilet products, parts, and accessories. PO Resp. 6. We adopt Patent Owner’s proposed definition of a POSITA, as it is consistent with the ’698 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). However, we see no material difference between the level of skill proposed by Patent Owner and that proposed by Petitioner and Dr. Cameron such that our determinations would be the same under either proposed level of skill.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningDecided for petitioner

    “Patent Owner asserts that, because each of the Flow Limitations relate to water flow through the bowl fill valve, these limitations require adjusting the flow rate of water exiting the flow valve. PO Resp. 15–17 (citing Ex. 2013 ¶ 97); See also PO Sur-Reply 7. Petitioner responds that “the claim language of the ’698 Patent discusses adjusting the water flow, not specifically the ‘flow rate.’” Pet. Reply 13. We are not persuaded by Patent Owner, and the conclusory testimony of Mr. Jobin (Ex. 2013 ¶ 97), that because the Flow Limitations “relate” to water flow through the bowl fill valve, that this necessarily means that the flow rate must be adjusted. As Petitioner points out, neither the term “flowrate” nor any similar term appears in any of the Flow Limitations. Thus, the plain language of the Flow Limitations requires that, contrary to Patent Owner’s position, the claim limitation should not be restricted to adjustments to “flow rate.”” slip op. at 14

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “Petitioner argues that Limitations 8B and 12B are directed to the configuration or structure of the bowl fill valve outlet port. Pet. Reply 2–4. According to Petitioner, because Limitations 8B and 12B do recite an overflow tube, the overflow tube is not separately claimed and is recited solely to define the function of the outlet port on the bowl fill valve. Id. at 3. Petitioner, thus, argues that an overflow tube is not separately claimed as a structural element, and that, to meet Limitations 8B and 12B, it is sufficient to show that the prior art discloses a bowl fill valve with an outlet port that is configured to attach directly to a tube that provides water from the outlet port to an overflow tube. Id. at 4. In contrast, Patent Owner argues that Limitations 8B and 12B separately claim the overflow tube, and that Petitioner must show that the prior art discloses a tube that transfers water from the bowl fill valve outlet port to the toilet tank overflow tube. PO Resp. 10–11; PO Sur-reply 2–3. We disagree with Patent Owner, because claims 8 and 12, on their face, require “bowl fill valve outlet port,” but do not require or recite an “overflow tube” as an element of the claimed “bowl fill valve.” When a structure is claimed as “configured to” perform a particular function, it generally requires a structure that is designed to perform the particular function claimed, i.e., it requires more than the mere capability of performing that function. See Aspex Eyewear, Inc. v. Marchon Eyewear, Inc., 672 F.3d 1335, 1349 (Fed. Cir. 2012) (claim language including the phrase “adapted to” is to be construed consistent with “configured to” language and requires that the structure must be “designed or configured to accomplish the specified objective, not simply that [it] can be made to serve that purpose.”); see also In re Giannelli, 739 F.3d 1375, 1379 (Fed. Cir. 2014). The plain language of Limitations 8B and 12B is clearly directed to the configuration of the bowl fill valve outlet port, in that these limitations recite “a bowl fill valve outlet port configured to.”8 The recited function is “attach directly to a tube that provides water from the bowl fill valve outlet port to an overflow tube.” The overflow tube is recited as part of the function in a clause identifying the tube to which the bowl fill valve outlet port is configured to attached — “that provides water from the bowl fill valve outlet port to an overflow tube.” The overflow tube, thus, is recited as part of the function defining the required structure of the bowl fill outlet port and is not separately claimed.” slip op. at 16

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “1. Petitioner’s Contentions Petitioner contends that the combination of Guoxin, Ho, and the Quick Connection Art teaches all of the limitations of claims 1–14 and provides a mapping showing where each claim limitation is found in the prior art. Pet. 21–59. We have reviewed the Petition’s mapping and determine that the Petition sufficiently shows that each limitation of claims 1–14 is disclosed by the combination of Guoxin, Ho, and the Quick Connection Art. Further, we have reviewed Petitioner’s rationale for combining the prior art and determine that the Petition sufficiently shows that it would have been obvious to a POSITA to combine Guoxin, Ho, and the Quick Connection Art.” slip op. at 23

  Patent outcomesUS 10,934,698 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,934,698
• Mobileye Global, Inc. / ZF Active Safety And Electronics US LLC v. Facet Technology Corp.Some claims unpatentable
  PTAB · Jan 23, 2026 · IPR2025-00749 · APJ Sean P O’Hanlon · IPR · Final written decision

  Claims 1–4 and 8–13 are unpatentable as obvious over Gallagher and Schofield; claims 5–7 and 14–16 were not shown unpatentable on the asserted combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “skilled artisan would have, with Petitioner contending four years and Patent Owner contending two years. Patent Owner’s witness, Dr. Papanikolopoulos, does not provide an explanation for his opinion or support his definition of the level of ordinary skill with citations to evidence. See Ex. 2023 ¶ 57 (“In my opinion, [Petitioner’s definition] is an excessive level of ordinary skill in the art, and I believe instead [an ordinarily skilled artisan] would more likely have two years of experience rather than four years.”). On the other hand, Petitioner’s witness, Dr. Thorpe, does provide an explanation for his opinion, explaining that his assertion that four years of experience is required is based on the state of the art, typical undergraduate curricula, and his supervision of doctoral students. Ex. 1030 ¶ 21. Based on the arguments presented and the cited references, we find Petitioner’s definition of the level of ordinary skill reasonable and for purposes of this Decision, adopt it as our own. We note that we would reach the same conclusions under either proposed standard.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “As a general rule, unless the steps of a method claim actually recite an order, the steps are not ordinarily construed to require one.” Mformation Techs., Inc. v. Rsch. in Motion Ltd., 764 F.3d 1392, 1398 (Fed. Cir. 2014) (citation modified). “However, a claim requires an ordering of steps when the claim language, as a matter of logic or grammar, requires that the steps be performed in the order written, or the specification directly or implicitly requires an order of steps.” Id. (cleaned up). “[O]rdinarily in process claims steps taken concurrently are the equivalent of steps taken successively.” In re White, 39 F.2d 974, 975 (CCPA 1930); see also Cybersettle, 243 F. App’x. at 609 (finding “the step of calculating the differences between demands and offers can occur concurrently with the [next enumerated step of] receipt of multiple demands and offers” and “the testing step of ‘determining whether any of the differences fall within the predetermined settlement range’ may occur concurrently with the receipt and comparison of the bids” (citation modified)). This is especially true here, given that the recitations at issue are functional language in an apparatus (system) claim. We further agree with Petitioner that the ’328 patent discloses such concurrent performance of these steps: Either concurrent with or subsequent to the identification of road signs 30 and generation of asset management database 24, the computer processor 22 evaluates that portion 32 of each video frame or image that depicts a road sign 30 to determine a set of color values 40, 42 for each of a plurality of colors on the road sign 32. A retroreflectivity value is generated for each color portion 34, 36 on each frame of the tagged videostream 20 containing the road sign 30 that represents a different color value 40, 42. slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Petitioner is correct to the extent that it need not show that “the features of [Schofield] may be bodily incorporated into the structure of [Gallagher],” but Petitioner must prove that “a skilled artisan would have been motivated to combine the teachings of the prior art references to achieve the claimed invention.” Allied Erecting, 825 F.3d at 1381. For claim 9, Petitioner proposes to modify Gallagher’s system to use “Schofield’s determination of a light source’s location within a field of view” in Gallagher’s system. Pet. 23. Thus, Petitioner’s combination does not require the combination of Gallagher’s and Schofield’s sensors into a single system, and Patent Owner’s “sensor fusion” argument is inapposite. See Tr. 48:8–49:6 (Patent Owner’s counsel confirming that the problem of “sensor fusion” stems from combining disparate sensors in a single system). As noted above, Schofield teaches considering the relative location of the light source in determining whether the light source is from headlights or taillights (that is, an object of interest). See Ex. 1006, 9:26–35. We are persuaded that an ordinarily skilled artisan would be motivated to use this teaching in Gallagher’s device to help distinguish between road markers that are arranged side-by-side and have a reasonable expectation of success in doing so. See Ex. 1005 ¶ 40; Ex. 1003 ¶¶ 77 (“[An ordinarily skilled artisan] would have seen Schofield’s determination of a light source’s location within the field of view as advantageous because it would have allowed Gallagher’s computer to associate the measured reflectance level with the appropriate road marker.”), 79 (“[I]mplementing this determination would have required [an ordinarily skilled artisan] to implement only conventional techniques of image processing (identifying a location of a particular pixel within an array), which was well known by [an ordinarily skilled artisan], to predictably yield the result of the location within a field of view indicating an intensity value associated with a road marker. Given that Schofield and Gallagher disclose similar types of arrays, this combination would have merely required the use of Schofield’s known technique to improve Gallagher’s similar device in the same way.”).” slip op. at 30

  • Obviousness (§103) › Analogous artNon analogous artNot shown unpatentable

    “A reference qualifies as prior art for a determination under § 103 when it is analogous to the claimed invention. In re Clay, 966 F.2d 656, 658 (Fed. Cir. 1992). Two separate tests define the scope of analogous prior art: (1) whether the art is from the same field of endeavor, regardless of the problem addressed, and (2) if the reference is not within the field of the inventor’s endeavor, whether the reference still is reasonably pertinent to the particular problem with which the inventor is involved. In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004) (citing In re Deminski, 796 F.2d 436, 442 (Fed. Cir. 1986)).” slip op. at 49

  Patent outcomesUS 9,671,328 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,671,328
• Mobileye Global, Inc. / ZF Active Safety And Electronics US LLC v. Facet Technology Corp.Some claims unpatentable
  PTAB · Jan 23, 2026 · IPR2024-01111 · APJ Sean P O’Hanlon · IPR · Final written decision

  Claims 1–4 and 8–13 are unpatentable as obvious over Gallagher and Schofield; claims 5–7 and 14–16 were not shown unpatentable on the asserted grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties disagree only on the length of experience an ordinarily skilled artisan would have, with Petitioner contending four years and Patent Owner contending two years. Patent Owner’s witness, Dr. Papanikolopoulos, does not provide an explanation for his opinion or support his definition of the level of ordinary skill with citations to evidence. See Ex. 2023 ¶ 57 (“In my opinion, [Petitioner’s definition] is an excessive level of ordinary skill in the art, and I believe instead [an ordinarily skilled artisan] would more likely have two years of experience rather than four years.”). On the other hand, Petitioner’s witness, Dr. Thorpe, does provide an explanation for his opinion, explaining that his assertion that four years of experience is required is based on the state of the art, typical undergraduate curricula, and his supervision of doctoral students. Ex. 1030 ¶ 21. Based on the arguments presented and the cited references, we find Petitioner’s definition of the level of ordinary skill reasonable and for purposes of this Decision, adopt it as our own. We note that we would reach the same conclusions under either proposed standard.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITANo construction needed

    “As a general rule, unless the steps of a method claim actually recite an order, the steps are not ordinarily construed to require one.” Mformation Techs., Inc. v. Rsch. in Motion Ltd., 764 F.3d 1392, 1398 (Fed. Cir. 2014) (citation modified). “However, a claim requires an ordering of steps when the claim language, as a matter of logic or grammar, requires that the steps be performed in the order written, or the specification directly or implicitly requires an order of steps.” Id. (cleaned up). “[O]rdinarily in process claims steps taken concurrently are the equivalent of steps taken successively.” In re White, 39 F.2d 974, 975 (CCPA 1930); see also Cybersettle, 243 F. App’x. at 609 (finding “the step of calculating the differences between demands and offers can occur concurrently with the [next enumerated step of] receipt of multiple demands and offers” and “the testing step of ‘determining whether any of the differences fall within the predetermined settlement range’ may occur concurrently with the receipt and comparison of the bids” (citation modified)). This is especially true here, given that the recitations at issue are functional language in an apparatus (system) claim. We further agree with Petitioner that the ’328 patent discloses such concurrent performance of these steps: Either concurrent with or subsequent to the identification of road signs 30 and generation of asset management database 24, the computer processor 22 evaluates that portion 32 of each video frame or image that depicts a road sign 30 to determine a set of color values 40, 42 for each of a plurality of colors on the road sign 32. A retroreflectivity value is generated for each color portion 34, 36 on each frame of the tagged videostream 20 containing the road sign 30 that represents a different color value 40, 42. Ex. 1001, 5:52–60. Thus, the ’328 patent discloses concurrently detecting objects of interest (road signs) and determining whether the object of interest has a particular color value. slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Petitioner is correct to the extent that it need not show that “the features of [Schofield] may be bodily incorporated into the structure of [Gallagher],” but Petitioner must prove that “a skilled artisan would have been motivated to combine the teachings of the prior art references to achieve the claimed invention.” Allied Erecting, 825 F.3d at 1381. For claim 9, Petitioner proposes to modify Gallagher’s system to use “Schofield’s determination of a light source’s location within a field of view” in Gallagher’s system. Pet. 23. Thus, Petitioner’s combination does not require the combination of Gallagher’s and Schofield’s sensors into a single system, and Patent Owner’s “sensor fusion” argument is inapposite. See Tr. 48:8–49:6 (Patent Owner’s counsel confirming that the problem of “sensor fusion” stems from combining disparate sensors in a single system). As noted above, Schofield teaches considering the relative location of the light source in determining whether the light source is from headlights or taillights (that is, an object of interest). See Ex. 1006, 9:26–35. We are persuaded that an ordinarily skilled artisan would be motivated to use this teaching in Gallagher’s device to help distinguish between road markers that are arranged side-by-side and have a reasonable expectation of success in doing so. See Ex. 1005 ¶ 40; Ex. 1003 ¶¶ 77 (“[An ordinarily skilled artisan] would have seen Schofield’s determination of a light source’s location within the field of view as advantageous because it would have allowed Gallagher’s computer to associate the measured reflectance level with the appropriate road marker.”), 79 (“[I]mplementing this determination would have required [an ordinarily skilled artisan] to implement only conventional techniques of image processing (identifying a location of a particular pixel within an array), which was well known by [an ordinarily skilled artisan], to predictably yield the result of the location within a field of view indicating an intensity value associated with a road marker. Given that Schofield and Gallagher disclose similar types of arrays, this combination would have merely required the use of Schofield’s known technique to improve Gallagher’s similar device in the same way.”).” slip op. at 30

  • Expert testimonyPatent owner expert discountedOther

    “The parties disagree only on the length of experience an ordinarily skilled artisan would have, with Petitioner contending four years and Patent Owner contending two years. Patent Owner’s witness, Dr. Papanikolopoulos, does not provide an explanation for his opinion or support his definition of the level of ordinary skill with citations to evidence. See Ex. 2023 ¶ 57 (“In my opinion, [Petitioner’s definition] is an excessive level of ordinary skill in the art, and I believe instead [an ordinarily skilled artisan] would more likely have two years of experience rather than four years.”). On the other hand, Petitioner’s witness, Dr. Thorpe, does provide an explanation for his opinion, explaining that his assertion that four years of experience is required is based on the state of the art, typical undergraduate curricula, and his supervision of doctoral students. Ex. 1030 ¶ 21. Based on the arguments presented and the cited references, we find Petitioner’s definition of the level of ordinary skill reasonable and for purposes of this Decision, adopt it as our own. We note that we would reach the same conclusions under either proposed standard.” slip op. at 11

  Patent outcomesUS 9,671,328 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,671,328
• Mobileye Global, Inc. / ZF Active Safety And Electronics US LLC v. Facet Technology Corp.No claims unpatentable
  PTAB · Jan 23, 2026 · IPR2025-00748 · APJ Sean P O’Hanlon · IPR · Final written decision

  Claim 15 was not shown unpatentable under § 103 over Gallagher and Lumia because Petitioner did not persuasively explain why a skilled artisan would combine their teachings.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties disagree only on the length of experience an ordinarily skilled artisan would have, with Petitioner contending four years and Patent Owner contending two years. As noted by Petitioner, Patent Owner’s witness, Dr. Papanikolopoulos, does not provide an explanation for his opinion or support his definition of the level of ordinary skill with citations to evidence. See Ex. 2023 ¶ 57 (“In my opinion, [Petitioner’s definition] is an excessive level of ordinary skill in the art, and I believe instead [an ordinarily skilled artisan] would more likely have two years of experience rather than four years.”). On the other hand, Petitioner’s witness, Dr. Thorpe, does provide an explanation for his opinion, explaining that his assertion that four years of experience is required is based on the state of the art, typical undergraduate curricula, and his supervision of doctoral students. Ex. 1030 ¶ 23. Based on the arguments presented and the cited references, we find Petitioner’s definition of the level of ordinary skill reasonable and for purposes of this Decision, adopt it as our own. We note that we would reach the same conclusions under either proposed standard.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (alteration in original) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). For purposes of this Decision, we determine that no construction of any term is necessary. slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Petitioner has not articulated persuasive reasoning for combining the teachings of Gallagher and Lumia. Petitioner argues that implementing Lumia’s teaching of determining the luminance of traffic signs in Gallagher’s system would allow Gallagher’s system to calculate the retroreflectivity of road markers as a means of identifying any markers that do not meet minimum acceptable reflectance levels for countries that require a minimum retroreflectivity level for road markers. Pet. 46 (citing Ex. 1003 ¶ 116; Ex. 1005 ¶¶ 49, 77; Ex. 1019, 6, 8–11).7 However, Gallagher already discloses determining whether the 7 Petitioner and Dr. Thorpe cite to the original pagination of Exhibit 1019 rather than the added exhibit pagination. reflectance level of each road marker meets a predetermined minimum acceptable reflectance level and tagging those road markers that do not meet the minimum acceptable reflectance level to identify them for replacement. See, e.g., Ex. 1005 ¶¶ 3, 67–68; see also id. ¶¶ 12–13, 18, 21, 49, 51, 76, 79, Fig. 5. Indeed, both Petitioner and Dr. Thorpe describe Gallagher’s system as ensuring that road markers meet minimum retroreflectivity standards: “Gallagher’s apparatus tests ‘road markings and road markers such as, for example, road signs and posts, reflective painted lines whether continuous or broken, and . . . raised pavement markers’ ‘to ensure they continue to meet minimum standards of reflectivity/retroreflectivity.’” Pet. 9 (alteration in original) (emphasis added) (citing Ex. 1005 ¶¶ 3, 6, 31–33); Ex. 1003 ¶ 55 (alteration in original) (emphasis added) (citing Ex. 1005 ¶¶ 3, 6, 31–33). Thus, we agree with Patent Owner that Petitioner has not identified persuasively why an ordinarily skilled artisan would have modified Gallagher’s system to include Lumia’s process for measuring retroreflectivity of traffic signs.” slip op. at 19

  • Strike new argumentNew argument disregardedDecided for patent owner

    “coefficient of luminous intensity rather than the coefficient of retroreflectivity, and Lumia teaches how to calculate retroreflectivity based on the coefficient of luminance intensity. Pet. Reply 20–21. During the hearing, counsel for Petitioner clarified that this reliance on Lumia entails using the equations disclosed in Lumia without altering Gallagher’s hardware. Tr. 27:18–29:24. During his deposition , Dr. Thorpe confirmed that this obviousness theory relies only on Lumia’s equations. See Ex. 2025, 60:5–65:2. This is an improper new argument. See, e.g., Henny Penny Corp. v. Frymaster LLC, 938 F.3d 1324, 1330–31 (Fed. Cir. 2019) (“[A]n IPR petitioner may not raise in reply ‘an entirely new rationale’ for why a claim would have been obvious.”). Notably, this new obviousness theory appears to stem from Patent Owner’s witness, Dr. Papanikolopoulos, noting differences in Gallagher’s and Lumia’s disclosures. See Pet. Reply 21 (citing Ex. 2023 ¶¶ 71 n.2, 89). Even considering Petitioner’s new theory, we find it unpersuasive because Petitioner does not explain adequately how the “determining a luminance value” recitation is met. Per Petitioner, Gallagher measures the coefficient of luminous intensity, but Petitioner does not identify a “luminance value” as recited in claim 15. Dr. Papanikolopoulos testifies that the coefficient of luminous intensity is not a luminance value: “As is well established, coefficient of luminous intensity—which is what Gallagher calculates—is a measurement of retroreflectivity (usually expressed in units of candelas, or millicandelas, per lux per square meter, i.e., cd/lx/m2), not luminance (usually expressed in candelas per square meter, i.e., cd/m2). Ex. 2023 ¶ 91. Petitioner’s witness, Dr. Thorpe, does not contest this testimony. See, e.g., Ex. 1030 ¶ 35. Thus, Petitioner’s new theory is unpersuasive.” slip op. at 20

  Patent outcomesUS 9,335,255 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,335,255
• Mobileye Global, Inc. / ZF Active Safety And Electronics US LLC v. Facet Technology Corp.No claims unpatentable
  PTAB · Jan 23, 2026 · IPR2024-01110 · APJ Sean P O’Hanlon · IPR · Final written decision

  Claim 15 was not shown unpatentable under § 103 over Gallagher and Lumia because Petitioner did not persuasively explain why a skilled artisan would combine their teachings.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties disagree only on the length of experience an ordinarily skilled artisan would have, with Petitioner contending four years and Patent Owner contending two years. As noted by Petitioner, Patent Owner’s witness, Dr. Papanikolopoulos, does not provide an explanation for his opinion or support his definition of the level of ordinary skill with citations to evidence. See Ex. 2023 ¶ 57 (“In my opinion, [Petitioner’s definition] is an excessive level of ordinary skill in the art, and I believe instead [an ordinarily skilled artisan] would more likely have two years of experience rather than four years.”). On the other hand, Petitioner’s witness, Dr. Thorpe, does provide an explanation for his opinion, explaining that his assertion that four years of experience is required is based on the state of the art, typical undergraduate curricula, and his supervision of doctoral students. Ex. 1030 ¶ 23. Based on the arguments presented and the cited references, we find Petitioner’s definition of the level of ordinary skill reasonable and for purposes of this Decision, adopt it as our own. We note that we would reach the same conclusions under either proposed standard.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (alteration in original) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). For purposes of this Decision, we determine that no construction of any term is necessary. slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Petitioner has not articulated persuasive reasoning for combining the teachings of Gallagher and Lumia. Petitioner argues that implementing Lumia’s teaching of determining the luminance of traffic signs in Gallagher’s system would allow Gallagher’s system to calculate the retroreflectivity of road markers as a means of identifying any markers that do not meet minimum acceptable reflectance levels for countries that require a minimum retroreflectivity level for road markers. Pet. 46 (citing Ex. 1003 ¶ 116; Ex. 1005 ¶¶ 49, 77; Ex. 1019, 6, 8–11).7 However, Gallagher already discloses determining whether the 7 Petitioner and Dr. Thorpe cite to the original pagination of Exhibit 1019 rather than the added exhibit pagination. reflectance level of each road marker meets a predetermined minimum acceptable reflectance level and tagging those road markers that do not meet the minimum acceptable reflectance level to identify them for replacement. See, e.g., Ex. 1005 ¶¶ 3, 67–68; see also id. ¶¶ 12–13, 18, 21, 49, 51, 76, 79, Fig. 5. Indeed, both Petitioner and Dr. Thorpe describe Gallagher’s system as ensuring that road markers meet minimum retroreflectivity standards: “Gallagher’s apparatus tests ‘road markings and road markers such as, for example, road signs and posts, reflective painted lines whether continuous or broken, and . . . raised pavement markers’ ‘to ensure they continue to meet minimum standards of reflectivity/retroreflectivity.’” Pet. 9 (alteration in original) (emphasis added) (citing Ex. 1005 ¶¶ 3, 6, 31–33); Ex. 1003 ¶ 55 (alteration in original) (emphasis added) (citing Ex. 1005 ¶¶ 3, 6, 31–33). Thus, we agree with Patent Owner that Petitioner has not identified persuasively why an ordinarily skilled artisan would have modified Gallagher’s system to include Lumia’s process for measuring retroreflectivity of traffic signs.” slip op. at 19

  • Strike new argumentNew argument disregardedDecided for patent owner

    “coefficient of luminous intensity rather than the coefficient of retroreflectivity, and Lumia teaches how to calculate retroreflectivity based on the coefficient of luminance intensity. Pet. Reply 20–21. During the hearing, counsel for Petitioner clarified that this reliance on Lumia entails using the equations disclosed in Lumia without altering Gallagher’s hardware. Tr. 27:18–29:24. During his deposition , Dr. Thorpe confirmed that this obviousness theory relies only on Lumia’s equations. See Ex. 2025, 60:5–65:2. This is an improper new argument. See, e.g., Henny Penny Corp. v. Frymaster LLC, 938 F.3d 1324, 1330–31 (Fed. Cir. 2019) (“[A]n IPR petitioner may not raise in reply ‘an entirely new rationale’ for why a claim would have been obvious.”). Notably, this new obviousness theory appears to stem from Patent Owner’s witness, Dr. Papanikolopoulos, noting differences in Gallagher’s and Lumia’s disclosures. See Pet. Reply 21 (citing Ex. 2023 ¶¶ 71 n.2, 89).” slip op. at 20

  Patent outcomesUS 9,335,255 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,335,255
• Provisur Technologies, Inc. v. Weber Food Technology GmbHAll claims unpatentable
  PTAB · May 28, 2025 · IPR2024-00235 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–6, 8, 10, and 14–16 are unpatentable as anticipated by Young and obvious over Young and Norrie; the Johnson and Belk ground was not reached.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Provisur proposes that one of ordinary skill in the art would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. See generally PO Resp. There being no dispute, we adopt Provisur’s definition of the level of skill in the art.” slip op. at 5

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Provisur construes the claim terms “according to their plain and ordinary meanings as understood by a [person of ordinary skill in the art] in view of the specification and prosecution history” and posits that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 13. Weber appears to agree, stating in the related district court action that “most of [its] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 3 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 4 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 5 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 6 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). 1028, 5. This being the case, we do not find the need to expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (confirming that the Board need not construe claim terms where their construction is not material to the dispute).” slip op. at 5

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “without first determining how much fat existed to begin with, i.e., prior to the side of meat being trimmed. But, as Provisur correctly notes, Weber ignores what one skilled in the art reasonably would have understood from reading Young’s disclosure as a whole. See Pet. 30–36 (citing Ex. 1003 ¶¶ 104–106, 109–112); Pet. Reply 2–12. When that is done, one skilled in the art would have understood that a necessary premise of Young’s determination of the thickness of fat to remain on the loin is knowing the thickness of the fat to begin with, which Young’s imaging system 190 and imaging processing routine 240 determine by first analyzing a series of “fat/lean separation lines” and “edge lines” in the side of meat being trimmed. Pet. 30–32 (citing Ex. 1004, 17:34–62, 18:33–56, 22:53–24:38, Figs. 2, 13); Pet. Reply 3–7 (citing portions of same evidence). More specifically, as described in Young (and articulated by Provisur), the side of meat is placed fat side down on a product support, i.e., platen 20. See Ex. 1004, 7:16–21, Figs. 1, 2. Using several cameras—top plan camera 196, end view camera 197, and fat line camera 198—Young’s imaging system 190 acquires multiple images of the side of meat from various angles and under various lighting conditions to “provide image data regarding each side of [meat].” See id. at 17:34–18:56. That image data is then used by Young’s image processing routine 240 to generate a series of demarcation lines on the side of meat, including: (1) fat/lean separation lines (representing the interface between the loin meat and the fat layer along top, side, and end views of the meat product; and (2) edge lines (representing lines along the outer surface of the meat product). See id. at 22:53–23:67, Figs. 10, 13 (Blocks 242, 246, 250, 254). In addition, “a plurality of points (preferably 20) are generated for each of the fat/lean separation and edge lines using known pattern matching routines.” Id. at 23:28–30, Fig. 13 (Blocks 244, 248, 252, 256); see also id. at 23:61–63 (essentially same). The fat/lean separation and edge lines (and points therein) generated by Young’s image processing routine 240 are then used to calculate certain dimensions and characteristics of the side of meat, such as height, length, and width. Id. at 24:10–22, Fig. 13 (Block 258). As Provisur’s expert credibly testifies, one skilled in the art would have understood that the dimension from the fat/lean separation line to the edge line along the outer surface represents the thickness of fat cover on the side of meat, i.e., before the fat is trimmed. See Ex. 1003 ¶ 106. Insofar as how that dimension is used, Young states that controller 172 uses “dynamic (real time) image data” of the fat/lean separation and edge lines “to dynamically modify the cutting profile of the loin knife assembly 100 so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Ex. 1004, 18:32–45; see also id. at 17:48–52 (describing “real time processor” for “image processing routines”). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the loin, after trimming, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat,” although “[o]ther fat thicknesses may be desired in the alternative.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphases added)). Because the desired thickness of fat cover is what remains on the loin” slip op. at 9

  • Strike new argumentNew argument consideredDecided for patent owner

    “argument that Weber considers vital to its dispute of Provisur’s showing for the claimed fat thickness determination. During oral hearing, Weber repeatedly argued that Provisur changed theories midstream, i.e., between the time of the petition and the hearing. See Hrg. Tr. 22:18–24:47; see also id. at 31:14–22, 33:8–18, 34:16–20, 49:17–50:15, 54:16–56:25 (repeating same argument). More specifically, according to Weber, Provisur originally relied only on image data from Young’s “top view” camera as processed in “block 246” of Young’s image processing routine 240 when showing how Young meets the claimed fat thickness determination, whereas now Provisur relies on image data from Young’s “end view” cameras as processed in “Block 254.” Compare PO Sur-Reply 3–6 (focusing on Young’s “top view camera” in “block 246”), with Hrg. Tr. 27:4–16 (“[Block] 246, which is what they relied on, is processing images from the top-view camera in Young’s system. It is generating lines from the top-view camera in Young’s system. What they are newly trying to rely on today, for the first time, is Block 254 that is discussed toward the bottom of column 23 in Young, and that analyzes different images from a different camera. It is the end camera. It generates different lines. It demonstrates an end fat/lean line and an end edge line. Prior to today’s hearing, neither Petitioner, nor its expert, had ever discussed Block 254. You will not find a single reference to 254 in their papers, nor have they discussed the end edge line. It is completely new today. It finds absolutely no support in the record.” (emphases added)). We disagree with Weber’s contention. As shown and described in the petition, Provisur relies on more than simply Young’s “top view” camera and “block 246.” See Pet. 29–31. Rather, in its petition, Provisur annotates Young’s Figure 2 to show that image data from all three cameras of “imaging system 190”—“top plan camera 196, end view camera 197, [and] fat line camera 198”—play a role in the determination of fat thickness.8 Id. at 30. Moreover, Provisur cites the entire process depicted in “Figure 13” and described in columns “22:53–24:38” of Young as critical to the determination. Id. at 31. Those cited portions of Young involve not only the analysis of fat/lean and edge lines from “top view” images (block 246), but also the analysis of fat/lean and edge lines from “end view” images (blocks 250 and 254). See Ex. 1004, 23:12–24:13. In other words, Provisur’s showing for the claimed fat thickness determination is based on Young’s collective analysis of all those images. Indeed, Provisur’s expert confirms as much when confronted by Weber on cross-examination— Q. How does [Young] use the other cameras to identify that fat/lean separation line? A. Again, this is a -- this is a three-dimensional product that’s not regular, and all the views basically are needed to be able to describe that complex three-dimensional shape, so that the knife will be able to cut at that -- at that line, offset by whatever desired thickness there is, on that three-dimensional shape. Ex. 2006, 25:15–27:19 (emphasis added). 8 Indeed, contrary to Weber’s assertion, Provisur highlights “fat lean separation camera 198,” not top view camera 196, as most critical to the determination of fat thickness. Pet. 31. In the end, we reject the notion that Provisur changed theories” slip op. at 12

  Patent outcomesUS 8,529,321 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 8,529,321
• Mobileye Global, Inc. v. Facet Technology Corp.Instituted
  PTAB · Mar 5, 2025 · IPR2024-01111 · APJ Sean P O’Hanlon · IPR · Institution

  The Board instituted IPR of claims 1–16 on all asserted grounds, finding a reasonable likelihood that claims 1 and 9 would be obvious over Gallagher and Schofield.

  RulingsInstitution decision

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner

    “Texas litigation, but significant work still remains to be done. See Ex. 2004. Moreover, we agree that Petitioner filed the Petition expeditiously. See 2nd Prelim. Reply 4. Accordingly, the facts underlying this factor weigh strongly against exercising our discretion to deny institution.” slip op. at 13

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “h. Conclusion Accordingly, at this stage of the proceeding, we determine that Petitioner has established a reasonable likelihood of prevailing on its assertion that claim 9 would have been obvious in view of the combination of Gallaher and Schofield.” slip op. at 32

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (alteration in original) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Neither party proposes a definition for any claim term. See Pet. 6; Prelim. Resp. 4–5. For purposes of this Decision, and based on the record before us, we determine that no construction of any term is necessary. We note that this determination does not preclude the parties from arguing their proposed constructions of the claims during trial. Indeed, the parties are hereby given notice that claim construction, in general, is an issue to be addressed at trial. A final determination as to claim construction will be made at the close of the proceeding, after any hearing, based on all the evidence of record. The parties are expected to assert all of their claim construction arguments and evidence during the trial as permitted by our rules. slip op. at 19

  • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner

    “Patent Owner has not advanced persuasive evidence to put into dispute Petitioner’s identification of itself as the sole real party in interest. Patent Owner asserts that the two third parties it seeks to add as defendants in the Texas Litigation produce products that incorporate components manufactured by Petitioner and that Patent Owner has asserted that these Petitioner products infringe the ’328 patent in the Texas Litigation. Prelim. Sur-reply 4–5. Patent Owner also asserts that these two third parties asserted an obligation to defend Petitioner and the other third party against Patent Owner’s infringement assertions. Id. at 5. However, Patent Owner does not assert or provide any evidence that Petitioner must indemnify any of the three third parties or that any of the third parties controls any aspect of this inter partes review proceeding. See id. Moreover, Petitioner stipulates that, if we institute inter partes review in this proceeding, it will not pursue in the Texas Litigation “‘any ground that [Petitioner] raised or reasonably could have raised’ during this proceeding.” Prelim. Reply 4 (alteration in original) (citing Sotera Wireless, Inc. v. Masimo Corp., IPR2020-01019, Paper 12 at 18–19 (PTAB Dec. 1, 2020) (precedential in relevant part)). Furthermore, to the extent that the two parties Patent Owner seeks to add as defendants in the Texas Litigation should be named as real parties in interest in this proceeding, those parties have also filed a stipulation here (see Ex. 1024), alleviating any concerns of conflict with district court litigation.” slip op. at 14

  Claim construction§ 103 obviousnessDiscretionary denialcites KSR · Graham
  Patents in suitUS 9,671,328
• Mobileye Global, Inc. v. Facet Technology Corp.Instituted
  PTAB · Mar 5, 2025 · IPR2024-01110 · APJ Sean P O’Hanlon · IPR · Institution

  The Board instituted IPR of claim 15 based on Gallagher and Lumia, finding a reasonable likelihood that the combination renders the claim obvious.

  RulingsInstitution decision

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied

    “7. Holistic Assessment of the Fintiv Factors On this record, after weighing all of the factors and taking a holistic view, we determine that the facts in this case that weigh against exercising discretion outweigh the facts that favor exercising discretion. Accordingly, we determine that the circumstances presented weigh against exercising our discretion under 35 U.S.C. § 314(a) to deny institution of inter partes review based on the Texas litigation.” slip op. at 16

  • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner

    “dispute Petitioner’s identification of itself as the sole real party in interest. Patent Owner asserts that the two third parties it seeks to add as defendants in the Texas Litigation produce products that incorporate components manufactured by Petitioner and that Patent Owner has asserted that these Petitioner products infringe the ’255 patent in the Texas Litigation. Prelim. Sur-reply 4. Patent Owner also asserts that these two third parties asserted an obligation to defend Petitioner and the other third party against Patent Owner’s infringement assertions. Id. However, Patent Owner does not assert or provide any evidence that Petitioner must indemnify any of the three third parties or that any of the third parties controls any aspect of this inter partes review proceeding. See id. Moreover, Petitioner stipulates that, if we institute inter partes review in this proceeding, it will not pursue in the Texas Litigation “‘any ground that [Petitioner] raised or reasonably could have raised’ during this proceeding.” Prelim. Reply 4 (alteration in original) (citing Sotera Wireless, Inc. v. Masimo Corp., IPR2020-01019, Paper 12 at 18–19 (PTAB Dec. 1, 2020) (precedential in relevant part)). Furthermore, to the extent that the two parties Patent Owner seeks to add as defendants in the Texas Litigation should be named as real parties in interest in this proceeding, those parties have also filed a stipulation here (see Ex. 1024), alleviating any concerns of conflict with district court litigation.” slip op. at 14

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Accordingly, at this stage of the proceeding, we determine that Petitioner has established a reasonable likelihood of prevailing on its assertion that claim 15 would have been obvious in view of the combination of Gallagher and Lumia.” slip op. at 31

  • Adverse judgmentAdverse judgmentOther

    “Here, Patent Owner filed a statutory disclaimer of claims 12–14 and 17–23. Prelim. Resp. 1; Ex. 2002. Based on our review of Exhibit 2002, we determine that a disclaimer of claims 12–14 and 17–23 of the ’255 patent under 35 U.S.C. § 253(a) has been filed with the Office as of December 9, 2024. Based on the information in the public record, we find that the disclaimer complies with the above-listed requirements of 37 C.F.R. § 1.321(a). Because claims 12–14 and 17–23 have been disclaimed under 35 U.S.C. § 253(a), in compliance with 37 C.F.R. § 1.321(a), we do not reach challenges to claims 12–14 and 17–23. As a result, the remaining challenged claim is claim 15 (“the challenged claim”).” slip op. at 7

  Claim construction§ 103 obviousnessDiscretionary denialcites KSR · Graham
  Patents in suitUS 9,335,255
• Foursquare Labs, Inc. v. Boardactive CorporationAll claims unpatentable
  PTAB · Nov 27, 2024 · IPR2023-00918 · APJ Robert J Silverman · IPR · Final written decision

  Claims 1–29 are unpatentable: claims 1–27 under the Adharapurapu (Alcatel) and Kerr obviousness ground, and claims 28–29 under the Adharapurapu (Alcatel) anticipation ground.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Our Institution Decision addressed the matter of the appropriate level of ordinary skill, in view of the Petition and the Preliminary Response, as follows: The parties’ descriptions of the level of ordinary skill at the time of the invention do not appear to differ in any material way that would affect this Decision. However, at this stage of the proceeding, it is unclear whether it would be proper to require Patent Owner’s proposed requirement of “three years of experience working with digital advertising and geofencing.” Prelim. Resp. 10–11. Accordingly, for the purposes of this [Institution] Decision, we adopt Petitioner’s description of the relevant level of skill in the art, because it appears to be consistent with the level of skill reflected in the ’620 patent and asserted prior art. Inst. Dec. 16. Patent Owner’s Response endorses the determination presented in the Institution Decision. PO Resp. 2. Petitioner does not address our initial determination in its Reply. See generally Pet. Reply. Accordingly, consistent with our Institution Decision, in this Final Written Decision, we employ Petitioner’s description of the relevant level of skill in the art. C. Claim Interpretation” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed

    “The Specification of the ’620 patent supports the understanding that a “consumer” is “a user or person,” per Patent Owner’s proposal (PO Resp. 11). See Ex. 1001, 8:36–38 (“The AdDrop™ may require the consumer to be one of the first few people to input an answer to a question to win the promotion.”) However, Patent Owner’s further proposed requirement — i.e., that a “consumer” be someone “to whom an advertisement may be sent” — would cloud, rather than clarify, the term’s meaning. PO Resp. 11 (emphasis added). For instance, under Patent Owner’s construction, it is not clear if “consumers” require access to the cellular network or Internet in order to be sent advertisements. Further, Patent Owner’s proposed construction would not assist in resolving any issue in this proceeding, contrary to our ambition to construe claim terms “only to the extent necessary to resolve the controversy.” Vivid Techs., 200 F.3d at 803. Moreover, the role of the term “consumer,” in the ’620 patent’s claims, is based upon the relationship of the “consumer” to particular actions and instrumentalities, e.g., associated “media content,” “profile data,” or a “device.” See, e.g., Ex. 1001, 37:57, 66–67, 38:15. In view of the foregoing, we do not adopt Patent Owner’s proposed construction that requires a “consumer” to be a person “to whom an advertisement may be sent.” See PO Resp. 11 (emphasis added). D. Prior Art References” slip op. at 15

  • Strike new argumentNew argument disregardedDecided for petitioner

    “As an initial matter, such a new argument that is introduced in a Sur- reply is improper. See 37 C.F.R. § 42.23(b) (“A sur-reply may only respond to arguments raised in the corresponding reply.”); Consolidated Trial Practice Guide10 74 (Nov. 2019) (“While replies and sur-replies can help crystalize issues for decision, a reply or sur-reply that raises a new issue or belatedly presents evidence may not be considered. The Board is not required to attempt to sort proper from improper portions of the reply or surreply.”); Hulu, LLC v. SITO Mobile R&D IP, LLC, IPR2021-00158, Paper 34 at 55 (PTAB Apr. 15, 2022). In addition, Patent Owner’s new “geolocation” argument is founded on attorney argument, without adequate support in record evidence, and is contradicted by the unchallenged testimony of Dr. Goldberg. See Ex. 2002 ¶¶ 29–66 (discussing terrestrial location technologies), 175–195 (discussing the disclosure of “geolocation” features in the Adharapurapu (Alcatel) reference).” slip op. at 22

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Yet, Patent Owner does not address Petitioner’s stated reasons (quoted above) for combining teachings of Adharapurapu (Alcatel) and Kerr, regarding the “registering asset data” features of limitation 1(a) (including its subparts) — reasons that are supported by the unchallenged testimony of Dr. Goldberg. See Pet. 50–51 (citing Ex. 1002 ¶¶ 196–197). Still further, Patent Owner does not address Petitioner’s other reasons for combining teachings of Adharapurapu (Alcatel) and Kerr, concerning the recited “content interaction layer” and “consumer tracking layer” features of limitation 1(b) (including its subparts): , POSITA would have found it obvious to incorporate Kerr’s user content interaction features into Alcatel to provide user subjective information/feedback for improving the accuracy, reducing noise, and enhancing efficiency in tailored communications. Pet. 43–44. Petitioner’s discussion of these reasons for combining the references’ teachings is supported by additional unrebutted testimony of Dr. Goldberg. Ex. 1002 ¶ 180. Having considered the parties’ arguments and the evidence of record (including the unchallenged testimony of Dr. Goldberg), we determine that Petitioner has sufficiently shown that the combination of Adharapurapu (Alcatel) and Kerr teach or suggest limitation 1(a) (including all subparts).” slip op. at 23

  Patent outcomesUS 10,621,620 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,621,620
• Copeland Comfort Control LP / Ecobee Technologies Ulc v. Ollnova Technologies Ltd.All claims unpatentable
  PTAB · Oct 1, 2024 · IPR2024-00131 · APJ Arthur M Peslak · IPR · Final written decision

  Claims 1, 3–8, 14, 15, and 18 are unpatentable as obvious over the Kates-711 grounds; the Board did not reach the alternative Kates-505 grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would have had a minimum of a bachelor’s degree in electrical engineering, or a related field, along with at least two years of professional experience in sensors, controls, and/or wireless communications.” Pet. 13–14 (citing Ex. 1002 ¶ 44–47). Petitioner further contends that “[a]dditional graduate education could substitute for professional experience, or significant experience in the field could substitute for formal education.” Id. Patent Owner does not address the level of ordinary skill in the art. See generally PO Resp. We apply Petitioner’s proposed level of skill in the art because it appears consistent with the problems addressed in the ’887 patent and the prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “sensed condition outside a predetermined range.” Patent Owner’s proposed construction of the second wherein clause replaces the word “suspended” with “that would otherwise occur is stopped.” PO Resp. 8–9 (“emphasis omitted”). This phrase is not part of claim 1. Nonetheless, adopting Patent Owner’s proposed construction could potentially render the second wherein clause superfluous because the first wherein clause does not require transmission of the most recent reading to occur when the change is within the predetermined range. Consequently, the language of claim 1 does not require or suggest Patent Owner’s proposed construction.” slip op. at 13

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “recent reading of the indicator stored in the memory during a period of a transmission interval in response to detecting a change in the sensed condition outside a predetermined range.” Ex. 1001, 14:63–67. This limitation also requires that “during the period of the transmission interval” the transmission “is suspended in response to detecting a change in the sensed condition within the predetermined range.” Id. at 14:67–15:4. Petitioner, therefore, must show that Kates-711 discloses a transceiver configured to transmit information or suspend transmission of the information during a “period” within a “transmission interval.” For the recited “transmission interval,” Petitioner contends that Kates’s “periodic intervals of ‘periodic monitoring’ is a [1.e] ‘transmission interval,’ during which there is a [1.e] ‘transmission period’ that includes a ‘report block.’” Pet. Reply 9. We agree with Petitioner for the following reasons. Kates describes the process shown in Figure 7 as follows: FIG. 7 is a flowchart showing one embodiment of operation of the sensor unit 102 wherein periodic monitoring is provided. In FIG. 7, a power up block 701 is followed by an initialization block 702, After initialization, the sensor unit 102 enters a low-power sleep mode. If a fault occurs during the sleep mode (e.g., the tamper sensor is activated), then the process enters a wake-up block 704 followed by a transmit fault block 705. If no fault occurs during the sleep period, then when the specified sleep period has expired, the process enters a block 706 where the sensor unit 102 takes a sensor reading from the sensor(s) 201. The sensor data is subsequently sent to the monitoring computer 13 in a report block 707. After reporting, the sensor unit 102 enters a listen block 708 where the sensor unit 102 listens for a relatively short period of time for instructions from monitoring computer 708. If an instruction is received, then the sensor unit 102 performs the instructions, otherwise, the process returns to the sleep block 703. Ex. 1004, 15:50–65. Based on this description of Figure 7, we find that Kates’s report block 707 corresponds to the recited “a period of the transmission interval” because it is a period of time when “sensor data is . . . sent to the monitoring computer.” Ex. 1004, 15:61. Further, block 707 is within an interval of “periodic monitoring” i.e., the process loop shown in Figure 7 beginning at block 703 and comprising steps 703, 706, 707, 708, 709, 710 and back to block 703. See also Ex. 1052 ¶ 22 (Dr. Neikirk testifying “each of [Kates’s] periodic intervals during which the ‘periodic monitoring’ process occurs is a ‘transmission interval’ . . . and the report block’ that occurs within this process is a transmission period.” (citations omitted)).” slip op. at 27

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “2. Analysis Motivation to Combine and Reasonable Expectation of Success Petitioner contends that “[w]hile Kates-711’s teachings not only render obvious but also disclose the ‘memory’ elements ([1.d]-[1.e], [5]), Hitt provides explicit teachings of a memory storing information as claimed.” Pet. 42. Petitioner further contends that Hitt’s memory 155 “stores instructions for execution by processor 156 and also stores periodically sampled sensor data for retrieval by the processor for processing and/or transmission.” Id. at 43 (citing Ex. 1002 ¶ 112; Ex. 1005 ¶¶ 65, 67– 68). According to Petitioner, an ordinarily skilled artisan “would have been motivated to modify Kates-711’s sensor units with Hitt’s teachings of ‘memory’ to achieve the beneficial and predictable result of utilizing a memory to securely store sensor readings.” Id. (citing Ex. 1002 ¶ 114). Petitioner argues that an ordinarily skilled artisan would have been further motivated to modify Kates-711 “by storing these sensor values in memory as taught by Hitt to improve reliability” in light of Hitt’s teaching that “storage of sensor values in memory . . . ensur[es] that the values are available for calculations and not unintentionally lost or erased, e.g., due to power outages or interruptions.” Id. at 44–45 (citing Ex. 1002 ¶ 116; Ex. 1005 ¶¶ 67–68). Petitioner next contends that an ordinarily skilled artisan would have had a reasonable expectation of success because Kates-711 “discloses that its controller may be a ‘conventional programmable microcontroller’; such microcontrollers were well-understood to commonly use a memory to, e.g., track data variables used for control applications.” Pet. 45 (citing Ex. 1002 ¶ 117). We have reviewed Petitioner’s evidence and contentions and find that Petitioner establishes that an ordinarily skilled artisan would have been motivated to modify Kates-711 with the teachings of Hitt and would have had a reasonable expectation of success. Ex. 1002 ¶¶ 112–117.” slip op. at 37

  Patent outcomesUS 7,746,887 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,746,887

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.