- PTAB · Apr 25, 2025 · IPR2024-01463 · APJ David Cotta · IPR · Institution
The Board instituted inter partes review of claims 1–10 on all asserted grounds, finding a reasonable likelihood of success on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“predict how the district court in the related district court litigation will proceed because the court may determine whether or not to stay any individual case . . . based on a variety of circumstances and facts beyond our control and to which the Board is not privy.” Sand Revolution II LLC v. Cont’l Intermodal Grp., IPR2019-01393, Paper 24, 7 (PTAB June 16, 2020) (informative). We decline to speculate on how the court may rule on the pending motion to stay. Accordingly, this factor is neutral.” slip op. at 13
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), inter partes review may not be instituted unless the Petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Petitioner has established a reasonable likelihood of prevailing on its assertion that at least one of the challenged claims is unpatentable based on the grounds advanced here. We decline to deny the Petition on a discretionary basis as requested by Patent Owner. Thus, for reasons explained below, we institute inter partes review of claims 1–10 of the ’706 patent.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“TC(220), and ΔRz/Ra are result effective variables and that copper foils having ΔPD, TC(220), and ΔRz/Ra values that meet the values recited in claim 1 have advantageous properties. See, e.g., Ex. 1005 ¶ 45 (Kim ’761, disclosing that preferably the “difference in peak count roughness Rpc between the shiny surface . . . and the matte surface . . . of the electrolytic copper foil . . . is preferably 60 or less” because “when the difference in the peak count roughness Rpc exceeds 60 capacity maintenance of the secondary battery is deteriorated.”);15 Ex. 1007, 3:16–23, 4:14–23 (Cheng, disclosing that the foils of Cheng’s invention have (220) and (311) surfaces that provide increased elongation and that solve a high roughness problem that rendered traditional products unsuitable for use in a lithium ion secondary battery), 10:27–34 (Cheng, disclosing that in the foils of Cheng’s invention “the roughness difference between both sides was extremely small” and thus “it was . . . not easy for the electrolytic copper foil to break or fracture during the charging-discharging cycles and the life of a battery is thus increased”), Tables 3 & 4 (Cheng, disclosing embodiments and comparative examples with TC(220) values meeting the requirements of claim 1); Ex. 1008, 6:36–44 (Wolski, disclosing that “the surface roughness Rz at the matte side of the untreated copper foil of the present invention is the same or smaller than the surface roughness Rz at the shiny side . . . so that the surface treated copper foil . . . becomes more low-profiled . . . whereby it becomes a foil having a large etching factor”), 9:1–29 & Table 2 (Wolski, disclosing 15 Dr. Randall testifies that “Kim ’761’s peak count roughness Rpc corresponds to the peak density PD of the ’706 patent.” Ex. 1003 ¶ 52. At this stage in the proceeding, this testimony is unrebutted. 38 embodiments meeting the ΔRz/Ra of claim 1, describing them as having “matte side roughnesses” that are “sufficiently small,” and as having “excellent” “high temperature elongation characteristics”), 11:37–41 (Wolski, describing comparative examples as having “large” matte side roughnesses “whereby etching factors are not good”), 12:12–27 (Wolski, teaching that “as compared with a conventional untreated copper foil, both surfaces of the untreated copper foil obtained by [Wolski’s] invention are flat” resulting in a low profile foil that has “excellent elongations at room temperature and high temperature and also high tensile strength”). The teachings in the prior art support the presently unrebutted testimony of Dr. Randall explaining why the POSA would have been motivated to modify Kim ’761’s copper foil to have the claimed TC(220) and ΔRz/Ra. Ex. 1003 ¶¶ 66–68, 71–74; Pfizer Inc., v. Sanofi Pasteur Inc., 94 F.4th 1341, 1348 (Fed. Cir. 2024) (“Where [a gap in prior art] includes a parameter not necessarily disclosed in the prior art, it is not improper to consider whether or not it would have been recognized as result-effective. If so, then the optimization of that parameter is ‘normally obvious.’”). Accordingly, we are not persuaded by Patent Owner’s argument that Petitioner failed to articulate a sufficient motivation to combine the references. To the contrary, the preliminary record presents a strong showing that the POSA would have been motivated to combine the references in the manner described in the Petition.” slip op. at 38
- Skill levelSkill level petitioner adoptedDecided for petitioner
“At this stage of the proceeding, Patent Owner does not contest Petitioner’s definition of the level of skill in the art. Prelim. Resp. 4 (“For purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art”). Petitioner’s definition appears to be consistent with the field of the invention reflected in the prior art of record and the disclosure of the ’706 patent. Accordingly, for purposes of this Decision, we adopt Petitioner’s proposed definition of the person of ordinary skill in the art.” slip op. at 21
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 11,591,706 - Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution deniedPTAB · Apr 25, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable under the asserted obviousness grounds.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“experience working on the development of materials or components for electronic devices such as batteries.” Pet. 2. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less work experience, and additional work experience could compensate for less formal education.” Id. Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’014 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). in this proceeding.” Pet. 3. Patent Owner contends that “[t]he Board need not construe any term in order to determine that institution should be denied.” Prelim. Resp. 4. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision. See Realtime Data, 912 F.3d at 1375.” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“For these reasons, we are not persuaded that Petitioner sufficiently establishes that a POSITA would have been motivated to modify Hanafusa in light of Dobashi with a reasonable expectation of success as Petitioner contends. Accordingly, we determine that Petitioner fails to demonstrate a reasonable likelihood of prevailing in its assertion that the subject matter of claim 1, and claims 4 and 8 that depend therefrom, would have been obvious over the combined teachings of Hanafusa and Dobashi.” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Petitioner also focuses on Hanafusa’s teaching that all known methods can be used to make a rough surface low-profile, and Dobashi’s teaching that RSm can be used as an indicator for judgment of the surface, to support its contention that a POSITA would have been motivated to apply Dobashi’s RSm to further achieve Hanafusa’s purpose, without explaining how and why that would be the case. In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness and is rough when RSm is small.” Id. at 3:1–3, 6:27–29. Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66– 3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66–3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 11,346,014 - Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentablePTAB · Mar 25, 2025 · IPR2023-01384 · APJ Jeffrey W Abraham · IPR · Final written decision
Claims 1–7 are unpatentable as obvious over Yoshida and Saxler; the Board did not reach the alternative grounds.
RulingsFinal written decision- Skill levelOther
“In light of the record before us, we determine that we do not need to reach a specific finding regarding the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“In the Institution Decision, we declined to adopt Petitioner’s proposed construction of the “side surfaces” limitation and determined that it was not necessary to further construe this term because “[t]he parties do not dispute that the language ‘side surfaces extending horizontally’ encompasses a gate material with sloped side surfaces as depicted in Figure 5 of the ’335 patent.” Inst. Dec. 11–16 (citing Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017); Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). We invited the parties to address this limitation further during the course of this trial, but neither party provided additional evidence or argument regarding the “side surfaces” limitation. Inst. Dec. 16; see generally PO Resp.; Reply; Sur-reply. Accordingly, we maintain our determination from the Institution Decision that we do not need to construe the “side surfaces” limitation. Inst. Dec. 15– 16.” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“This evidence, particularly the language in the ’335 patent itself, undermines Patent Owner’s argument that “[t]he process for forming gate ledges using separate masks instead of the self-aligned process disclosed in the ’335 patent cannot produce ledges that are ‘substantially symmetric.’” PO Resp. 39 (emphasis added); see also PO Resp. 42–43 (arguing that a gate structure with ledges having substantially equal widths is “not achievable” without using a single photo-mask process). We have considered the evidence presented by Patent Owner and Dr. Schubert in support of Patent Owner’s arguments. PO Resp. 38–43; Ex. 2005 ¶¶ 49–51. We, however, are unable to discern sufficient evidence supporting a conclusion that using separate masks cannot produce ledges that are substantially symmetric, particularly when the ’335 patent suggests otherwise. See Ex. 1001, 4:60– 63 (referring only to the “possibility of misalignment”). Even if, as Patent Owner and Dr. Schubert contend, misalignment “naturally” occurs when using a two-mask process, that does not foreclose the possibility that the” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“It is well settled that “[a] reference does not teach away . . . if it merely expresses a general preference for an alternative invention but does not ‘criticize, discredit or otherwise discourage’ investigation into the invention claimed.” DePuy Spine, Inc. v. Medtronic Sofamor Danek, Inc., 567 F.3d 1314, 1327 (Fed. Cir. 2009) (quoting In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004)). Furthermore, “teaching that a composition may be optimal or standard does not criticize, discredit, or otherwise discourage” slip op. at 31
Patent outcomesUS 10,312,335 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,312,335 - Biofrontera Inc. / Biofrontera Bioscience GmbH et al. v. Sun Pharmaceutical Industries, Inc.InstitutedPTAB · Feb 24, 2025 · IPR2024-01312 · APJ Erica A Franklin · IPR · Institution
The Board instituted review of claims 1, 2, 4-6, 16, 17, and 19-21 on all asserted grounds, finding a reasonable likelihood of unpatentability over Lundahl and Larsen.
RulingsInstitution decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“justification for requiring a POSITA to have both an engineering degree and a medical degree. We agree, insofar as Petitioner has not clearly set out any particular explanation or evidence in support of its dual-degree requirement. In all other respects, we note that the parties’ proposed definitions are largely similar. Because we determine that Patent Owner’s proposed definition is reasonable and consistent with the ’028 patent and the cited art, we adopt Patent Owner’s definition for purposes of this Decision. In any event, our decision whether to institute does not turn on this level of skill determination.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“used to construe the claim in a civil action under 35 U.S.C. § 282(b); 37 C.F.R. § 100(b). Under that standard, claim terms “are generally given their ordinary and customary meaning” as understood by a person of ordinary skill in the art at the time of the invention. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc) (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). See Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner and Patent Owner assert that the Board need not construe any claims for the purpose of deciding whether to institute an inter partes review. Pet. 12; Prelim. Resp. 24. We agree.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Based on our review of the Petition, Petitioner explains that a driving motivation for a POSITA to modify Lundahl to include Larsen’s five panels is “to increase the flexibility of the device to ensure the light panels could be maintained at a distance of 2-4′′ from surface of the treatment area, whether the face, arm, or back, etc.” Pet. 29 (emphasis added). As Lundahl’s device is not flexible, and such flexibility would improve its ability to treat areas other than an average sized face, we determine, at this stage in the proceeding, that this motivation for the combination is sufficient.” slip op. at 20
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightInstituted
“would have been motivated to modify Lundahl’s device by incorporating Larsen’s use of LEDs on the surface of the light applicators in place of Lundahl’s fluorescent tubes with a reasonable expectation of success. Prelim. Resp. 55. Patent Owner argues that Petitioner’s modification is based on improper hindsight bias because “Petitioner cherry-picks Larsen’s LEDs (together with the five panels) and purports to arrange them according to the [sic] ‘the uneven spacing’ of Lundahl’s fluorescent tubes.” Id. at 56 (citing Pet. 46–49; Ex. 1015 ¶¶ 175–80). According to Patent Owner, “Petitioner cannot on the one hand argue that a ‘POSITA would have understood that Larsen’s applicator is configured to uniformly illuminate a treatment surface of the patient,’ while on the other ignore Larsen’s teaching that the ‘light sources 17 are placed in regular row arrangements.’” Id. Patent Owner asserts that Petitioner’s proposed modification “mish-mashes aspects of Lundahl and Larsen ([while] avoiding the overall teachings of [challenged] claims.” Id. at 56–57. As discussed above, based on our consideration of the current record, Petitioner has provided sufficient motivation for employing Larsen’s flexible five panel configuration. These panels in Larsen already use LEDs as their light source. So, in our view, Petitioner’s incorporation of the five panels includes the lighting source, i.e., LEDs, for those panels taught by Larsen. Further, we note that Petitioner has persuasively asserted that a skilled artisan would have been motivated to use Larsen’s LEDs as they are more cost-efficient and last longer. See Pet. 31.” slip op. at 20
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,697,028 - Apple Inc. v. RJ Technology LLCSome claims unpatentablePTAB · Feb 18, 2025 · IPR2023-01350 · APJ Jon B Tornquist · IPR · Final written decision
Claims 5–10 are unpatentable as obvious; claims 11–14 were not shown unpatentable because the evidence did not establish the claimed capacity retention after 400 cycles.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends a person of ordinary skill in the art “would have held a Bachelor’s degree in chemistry or chemical engineering, with at least 4 years of experience in cell design, electrochemical techniques, and battery materials development.” Pet. 4. Petitioner further contends that a “Master’s Degree can substitute[] for some of the relevant experience,” and “[e]quivalent training with battery specific experience can accommodate other degreed fields.” Id. 9 The parties here do not address objective evidence of nonobviousness. Patent Owner does not dispute Petitioner’s definition of the ordinarily skilled artisan. PO Resp. 20. We adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the ’641 patent, the prior art of record, and the parties’ arguments.” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“The parties agree that the term “charge cut-off voltage” is “the maximum voltage to which the battery is configured to be charged.” PO Resp 21–22; Pet. Reply 1. The parties dispute, however, whether the “charge cut-off voltage” is a “battery property” or “the voltage applied to the battery during charging.” PO Resp. 21–24; Pet. Reply 1–6. We need not resolve the precise meaning of “charge cut-off voltage” because there is no dispute that Yamaki discloses this limitation under either party’s interpretation of the claim term. Upon review of the prior art and the parties’ arguments, we determine that no terms of the ’641 patent require express construction. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))); Pet. Reply 1 (asserting that the challenged claims are unpatentable under either parties’ construction of “charge cut-off voltage”).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“Patent Owner’s arguments do not persuasively undermine Petitioner’s position. Sakamoto expressly discloses setting the ratio of negative to positive electrode active material in the range of 1.05 to 1.30. Ex. 1005 ¶ 8. Sakamoto also explains why this range is preferable, i.e., if the ratio is roughly equal “the charge-discharge cycle performance is insufficient due to significant deterioration from charging and discharging,” and if the ratio is 10 Citations to the prosecution history of Yamaki are to the page numbers added to the lower right corner of the document. too high “too much of the compound does not participate in charging and discharging.” Id. ¶¶ 6, 8. These disclosures are sufficient to explain why one of ordinary skill in the art would have found it obvious to select the ratios disclosed in Sakamoto in Yamaki. Id. ¶ 8 (providing a secondary battery with a capacity ratio between 1.05 and 1.30 and noting that by setting the ratio within this range the resulting secondary lithium battery is “safe due to low risk of heat being generated and an explosion occurring”). We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 15
Patent outcomesUS 7,749,641 mixedClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,749,641 - PTAB · Feb 6, 2025 · IPR2024-01211 · APJ John G New · IPR · Institution
The Board instituted IPR on claims 18–47 and 53–74 and all petition grounds, finding a reasonable likelihood that claims 18–25, 27, and 29–33 are obvious over Racz, Fitz, and Lee.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“§ 314. An inter partes review may not be instituted unless “the information presented in the petition … and any response … shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Further, a decision to institute may not do so on fewer than all of the claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018); 37 C.F.R. § 42.108(a); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yesor-no institution choice respecting a petition, embracing all challenges included in the petition”).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Absent evidence or argument to the contrary, we apply Petitioner’s proposed definition, as it appears to be consistent with the level of skill of the prior art and is supported by the presently unopposed testimony of Dr. Tucker. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the level of ordinary skill in the art may be reflected in the prior art itself). We note, however, that the open-ended language ‘at least’ expands the ranges of education and experience indefinitely with no upper bound, thereby also encompassing those of extraordinary skill as well. Therefore, we do not adopt this aspect of Petitioner’s formulation.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“With respect to the challenged claims, Petitioner contends that no claim term requires express construction. Pet. 11 (citing Ex. 1033 ¶ 120 (Dr. Tucker’s testimony that “the terms in the Challenged Claims would be understood by a POSA to have their plain and ordinary meaning and do not require a special construction or definition”)). We agree with Petitioner that, on the record presently before us, no claim term requires express construction.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Petitioner argues that, in view of these teachings in Racz and Lee, a skilled artisan would have found implementing Lee’s perimeter filaments (22/1622) on Racz’s distal tip (14/38) to be a routine engineering task. Pet. 39 (citing Ex. 1033 ¶ 179). According to Petitioner, a person of ordinary skill in the arts would have recognized that it would be appropriate to implement Lee’s perimeter filaments (22/1622) without including Lee’s central filament. Id. Petitioner asserts that Lee discloses that any number and arrangement of filaments may be implemented to provide a desired ablation volume. Id. at 38 (citing Ex. 1010 ¶¶ 103, 105, 106). Additionally, Petitioner argues, because Racz’s tip (14/38) is already active, a skilled artisan would have recognized that Lee’s central filament would not be necessary. Id. (citing Ex. 1009, col. 3, ll. 60–63, col. 4, ll. 18–23; Ex. 1033 ¶ 179). Petitioner therefore argues that a person of ordinary skill in the art a person of ordinary skill in the art would have been motivated to implement Lee’s perimeter deployable filaments (22/1622) on the distal tip (14/38) of Racz’s cannula (10/33) for the purpose of expanding and controlling the energy coverage area of Racz’s device. Pet. 40. Specifically, Petitioner asserts that a skilled artisan would have been motivated to implement Lee’s perimeter filaments (22/1622) around Racz’s tip (14/38) to provide a desired ablation volume (e.g., in a full or partial “cone” shape) and omit Lee’s central filament. Pet. 38 (citing Ex. 1033 ¶¶ 179, 73–75, 79–83). Petitioner contends that, as both Lee and Fitz confirm, this would improve Racz’s device by providing an expanded and controlled energy coverage area. Id. (citing Ex. 1011 ¶¶ 9–10, Abstr.; Ex. 1010 ¶¶ 12, 84, 123–131; Ex. 1033 ¶ 179). Petitioner argues further that, in implementing Lee’s perimeter filaments (22/1622) on Racz’s distal tip (14/38), a person of ordinary skill in the art would have found it obvious to modify Racz’s tip (14/38) to include internal deflection surfaces (12/1612) (e.g., channels and ramps as disclosed in Lee) to guide the perimeter filaments (22/1622) outwardly around Racz’s tip (14/38). Pet. 41 (citing Ex. 1010 ¶¶ 16, 18, 92, 102, claims 8, 10; Ex. 1033 ¶ 180). Petitioner asserts that it would have been obvious to provide openings in Racz’s distal tip (14/38) (e.g., in communication the internal deflection surfaces as disclosed in Lee) such that Lee’s perimeter filaments (22/1622) can, when deployed, exit Racz’s distal tip (14/38). Id. (citing Ex. 1010 ¶ 92, 102; Ex. 1033 ¶ 180). Furthermore, argues Petitioner, and to preserve the functionality of Racz’s removable electrical probe (22/52) and active tip (14/38) (and consistent with Lee’s teachings) a skilled artisan would have arranged the perimeter filaments, channels, and ramps around the internal perimeter of Racz’s cannula (10/33). Pet. 41 (citing Ex. 1010 ¶¶ 91, 92, 98, 102; Ex. 1033 ¶ 181). Petitioner recapitulates that Racz’s probe (22/52) is configured to extend the full length of the cannula’s shaft (12/34) to supply RF energy to the tip (14/38) and measure tissue temperature. Pet. 42. According to Petitioner, by omitting Lee’s central filament and arranging the perimeter filaments, channels, and ramps around the inner perimeter of Racz’s cannula (10/33), a skilled artisan could have implemented Lee’s perimeter filaments (22/1622) without obstructing Racz’s cannula (10/33). Id. at 40. Petitioner contends that this modification would preserve the functionality of Racz’s electrical probe (22/52), which is needed to transmit RF energy. Id. (citing Ex. 1033 ¶ 181–182).” slip op. at 29
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,736,688 - PTAB · Feb 6, 2025 · IPR2024-01210 · APJ John G New · IPR · Institution
The Board instituted IPR on claims 1–17 and 48–52 on all asserted grounds, finding a reasonable likelihood that at least one claim was obvious over Racz, Fitz, and Lee.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“§ 314. An inter partes review may not be instituted unless “the information presented in the petition … and any response … shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Further, a decision to institute may not do so on fewer than all of the claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018); 37 C.F.R. § 42.108(a); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yesor-no institution choice respecting a petition, embracing all challenges included in the petition”).” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“Absent evidence or argument to the contrary, we apply Petitioner’s proposed definition, as it appears to be consistent with the level of skill of the prior art and is supported by the presently unopposed testimony of Dr. Tucker. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the level of ordinary skill in the art may be reflected in the prior art itself). We note, however, that the open-ended language ‘at least’ expands the ranges of education and experience indefinitely with no upper bound, thereby also encompassing those of extraordinary skill as well. Therefore, we do not adopt this aspect of Petitioner’s formulation.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“With respect to the challenged claims, Petitioner contends that no claim term requires express construction. Pet. 11 (citing Ex. 1032 ¶ 120 (Dr. Tucker’s testimony that “the terms in the Challenged Claims would be understood by a POSA to have their plain and ordinary meaning and do not require a special construction or definition”)). We agree with Petitioner that, on the record presently before us, no claim term requires express construction.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“person of ordinary skill in the art would have been motivated to implement Lee’s perimeter deployable filaments (22/1622) on the distal tip (14/38) of Racz’s cannula (10/33) for the purpose of expanding and controlling the energy coverage area of Racz’s device. Pet. 35. Specifically, Petitioner asserts that a skilled artisan would have been motivated to implement Lee’s perimeter filaments (22/1622) around Racz’s tip (14/38) to provide a desired ablation volume (e.g., in a full or partial “cone” shape) and omit Lee’s central filament. Pet. 38 (citing Ex. 1032 ¶¶ 179, 73–75, 79–83). Petitioner contends that, as both Lee and Fitz confirm, this would improve Racz’s device by providing an expanded and controlled energy coverage area. Id. (citing Ex. 1011 ¶¶ 9–10, Abstr.; Ex. 1010 ¶¶ 12, 84, 123–131; Ex. 1032 ¶ 179). Petitioner argues further that, in implementing Lee’s perimeter filaments (22/1622) on Racz’s distal tip (14/38), a person of ordinary skill in the art would have found it obvious to modify Racz’s tip (14/38) to include internal deflection surfaces (12/1612) (e.g., channels and ramps as disclosed in Lee) to guide the perimeter filaments (22/1622) outwardly around Racz’s tip (14/38). Pet. 39 (citing Ex. 1010 ¶¶ 16, 18, 92, 102, claims 8, 10; Ex. 1032 ¶ 180). Petitioner asserts that it would have been obvious to provide openings in Racz’s distal tip (14/38) (e.g., in communication the internal deflection surfaces as disclosed in Lee) such that Lee’s perimeter filaments (22/1622) can, when deployed, exit Racz’s distal tip (14/38). Id. (citing Ex. 1010 ¶ 92, 102; Ex. 1032 ¶ 180).” slip op. at 29
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,736,688 - PTAB · Jan 13, 2025 · IPR2024-01156 · APJ Jeffrey N Fredman · IPR · Institution
The Board instituted inter partes review of claims 1–30 on all grounds, finding it more likely than not that the claims are unpatentable.
RulingsInstitution decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“On the current record, there is no controversy over the meaning of any of the claim terms and neither party identifies a claim construction that would impact our analysis. We therefore find that, at this stage of the proceeding, there are no terms that need claim construction. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 7
- Skill levelSkill level petitioner adoptedDecided for petitioner
“VIII. LEVEL OF ORDINARY SKILL IN THE ART Petitioner asserts (without opposition): A person of ordinary skill in the art (“POSA”) at the time of invention would have a working knowledge of microbiology and would have been involved in developing testing methodologies for analysis of samples such as food products (“validation methodologies”). The POSA would most likely have an advanced degree in microbiology, food science, or animal science and at least two years of work experience but may alternatively have a bachelor’s degree in those areas and at least four years of experience with validation methodologies. The POSA would have been familiar with relevant scientific literature and industry regulations, directives, and guidelines relating to validation methodologies.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“Determining whether claims are anticipated involves a two-step analysis. The first step involves construction of the claims of the patent at issue. Claim construction is a question of law reviewed de novo.” In re Aoyama, 656 F.3d 1293, 1296 (Fed.Cir.2011). “The second step [of an anticipation analysis] involves comparing the claims to the prior art. Anticipation is a question of fact reviewed for substantial evidence.” In re Aoyama, 656 F.3d at 1296. “A prior art reference anticipates a patent claim under 35 U.S.C. § 102(b) if it discloses every claim limitation.” In re Montgomery, 677 F.3d 1375, 1379 (Fed. Cir. 2012). A reference may anticipate inherently if a claim limitation that is not expressly disclosed “is necessarily present, or inherent, in the single anticipating reference.” Verizon Servs. Corp. v. Cox Fibernet Va., Inc., 602 F.3d 1325, 1337 (Fed. Cir. 2010). slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“The motivation-to-combine analysis is a flexible one. “[A]ny need or problem known in the field of endeavor at the time of invention and addressed by the patent can provide a reason for combining the elements in the manner claimed,” [but the] “analysis ‘need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.’” Intel Corp. v. PACT XXP Schweiz AG, 61 F.4th 1373, 1379–80 (Fed. Cir. 2023) (quoting KSR, 550 U.S. at 418, 420 (emphasis added)). “[I]f there’s a known technique to address a known problem using ‘prior art elements according to their established functions,’ then there is a motivation to combine,” because KSR explains that “if a technique has been used to improve one device [or method], and a person of ordinary skill in the art would recognize that it would improve similar devices [or methods] in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” Id. at 1380 (quoting KSR, 550 U.S. at 417; and Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 797 (Fed. Cir. 2021)). If addressing a known problem, the prior art combination need not be “the best option, only . . . a suitable option.” Id. (quoting Intel, 21 F.4th at 800 (emphasis original)).” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,845,486 - PTAB · Jan 13, 2025 · IPR2024-00185 · APJ Robert A Pollock · IPR · Institution
The Board instituted IPR on claims 1–7, 11, 12, 14–20, 22–24, 26, and 29–36 on all asserted grounds, finding a reasonable likelihood of success on obviousness.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“III. CONCLUSION After considering the evidence and arguments presented in the Petition, we determine that Petitioner has demonstrated a reasonable likelihood of success in proving that at least one challenged claim of the ’143 Patent is unpatentable. In particular, because Petitioner has demonstrated a reasonable likelihood that at least one claim is rendered obvious by the asserted combinations of ICMSF, Hughes, and Price, we institute inter partes review on all grounds set forth in the Petition. At this stage of the proceeding, the Board has not made a final determination as to the patentability of any challenged claim or the construction of any claim term. Thus, our view with regard to any conclusion reached in the foregoing could change upon consideration of Patent Owner’s merits response and completion of the record.” slip op. at 54
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We agree with Patent Owner that the term “lots” does not require construction because on the current record, there is no controversy over the meaning of the term, and neither Petitioner nor Patent Owner identify any way that claim construction may impact our decision. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We also agree with Patent Owner that the ’143 patent provides definitions that guide the understanding of the term “lots” including teaching: The term “test lot” or “reportable lot” as used herein to refer to an assemblage of one or more specimens of a medium or process (e.g. assemblage of specimens of air, water, solids or of product of a production process, etc.) where such assemblage can be sampled by taking portions of the one or more specimens thereof, and where the one or more specimens of the assemblage are operationally linked in a manner (e.g. proximity, time, process step, etc.) whereby information derived about sampled portions is operationally applicable to all specimens of the assemblage, and thus to the test lot. In particular instances, portions are synonymous with specimens. Ex. 1002, 5:34–45. The Specification similarly provides definitions for “product portion,” “test lot sample,” and “single-unit production lot” that provide significant guidance and clarity as to the meaning of these terms. Id. at 5:52–63, 6:2–20.” slip op. at 16
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“validation” as used herein with respect to production lots refers to determining that a particular sample tests negative using the detection assay. Where a modular composite sample tests negative, all single-unit production lot samples comprising the composite sample are validated along with the respective single-unit production lots, which are thus cleared for release. Where a modular composite sample tests positive, individual single unit production lots may nonetheless yet be validated if particular respective single-unit production lot samples test negative. Ex.1002, 7:15–24 (emphasis added). The above text expressly equates “validation” to a determination that “a particular sample tests negative.” The initial definitional sentence makes no mention of “cleared for release” as necessary for “validation.” The subsequent sentence refers to “cleared for release” in the more limited situation where a particular composite sample “tests negative all single-unit production lot samples,” and, even then, the “cleared for release” language indicates a separate step that may happen after the samples are “validated.” slip op. at 21
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“On the current record, we are not persuaded that Petitioner has insufficiently articulated a motivation to combine or modify the asserted references. With respect to Ground 1, for example, Petitioner contends that one of ordinary skill in the art would have been motivated to modify ICMSF based on Gombas under the teaching-suggestion-motivation test so portions of the enriched, retained samples are further tested after a positive test of a composite sample by the same protocol, with a reasonable expectation of success for efficient validation. See § XII-A-1-h supra; Dickson ¶¶ 417-19. Pet. 53–54. Petitioner further argues that ordinarily skilled artisan would have sought to improve[] ICMSF with the similar methods of Gombas to yield efficient validation, which is a predictable result. KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 417 (2007). In this combination, a POSA would have simply substituted steps of ICMSF, as described above, with those of Gombas so portions of the enrichment cultures are retained and are further tested after a positive test of a composite sample by the same protocol for predictably efficient validation. MPEP § 2143(I)(B); Dickson ¶ 420. Id. at 53. As such, the Petition provides specific reasons to combine ICMSF and Gombas that are consistent with the flexible test recited in KSR, including the benefit of efficient validation of the test and that the combination is a simple substitution of steps. As KSR notes, “if a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR, 550 US at 417. Here, Petitioner has made its reasons to combine explicit. See Pet. 53–” slip op. at 47
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSRPatents in suitUS 8,822,143 - PTAB · Jan 13, 2025 · IPR2024-00183 · APJ Robert A Pollock · IPR · Institution
The Board instituted IPR on claims 1–6, 10, 11, 13–20, 22, 23, and 26–33 because the asserted combinations of ICMSF, Hughes, and Price showed a reasonable likelihood that at least one claim was obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“314. An inter partes review may not be instituted unless “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Further, a decision to institute may not do so on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018); 37 C.F.R. § 42.108(a). After considering the evidence and arguments presented in the Petition, we determine that Petitioner demonstrates a reasonable likelihood of prevailing in showing that at least one of the challenged claims of the ’584 patent is unpatentable. Accordingly, we institute an inter partes review as to the challenged claims of the ’584 patent on the grounds of unpatentability set forth in the Petition. A.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art at the time of the invention (POSA/POSITA), “would most likely have an advanced degree in microbiology, food science, or animal science and at least two years of work experience but may alternatively have a bachelor’s degree in those areas and at least four years of experience with validation methodologies.” Pet. 11. (citing Ex. 1041 ¶¶ 22–24). Petitioner further contends that a person of ordinary skill in the art would have had “a working knowledge of microbiology,” “would have been involved in developing sampling and testing methodologies for analysis of food products (“validation methodologies”),” and “would have been familiar with relevant scientific literature and industry regulations, directives, and guidelines relating to validation methodologies.” Id.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We agree with Patent Owner that the term “lots” does not require construction because on the current record, there is no controversy over the meaning of the term, and neither Petitioner nor Patent Owner identify any way that claim construction impacts the decision. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 16
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“This definition requires that a “validation” determines that “a particular sample tests negative.” The initial definition sentence makes no mention of “cleared for release” as necessary for “validation.” Rather, the definition only refers to “cleared for release” in the more limited situation where a particular composite sample “tests negative all single-unit production lot samples,” and even then, the “cleared for release” is a separate step that occurs after the samples are “validated.”” slip op. at 21
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSRPatents in suitUS 7,534,584
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.