- Shenzhen Root Technology Co., Ltd. v. Willow Blossom Holdco Limited And Willow Innovations, Inc.All claims unpatentablePTAB · Sep 25, 2026 · IPR2025-00554 · APJ Barry L Grossman · IPR · Final written decision
Claims 17–19 and 21–33 are unpatentable as obvious under each asserted § 103 ground.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Factors pertinent to a determination of the level of ordinary skill in the art include: (1) educational level of the inventor; (2) type of problems encountered in the art; (3) prior art solutions to those problems; (4) rapidity with which innovations are made; (5) sophistication of the technology; and (6) educational level of workers active in the field. Env’t Designs, Ltd. v. Union Oil Co., 713 F.2d 693, 696–697 (Fed. Cir. 1983) (citing Orthopedic Equip. Co. v. All Orthopedic Appliances, Inc., 707 F.2d 1376, 1381–82 (Fed. Cir. 1983)). Not all such factors may be present in every case, and one or more of these or other factors may predominate in a particular case. Id. Moreover, these factors are not exhaustive but are merely a guide to determining the level of ordinary skill in the art. Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). In determining a level of ordinary skill, we also may look to the prior art, which may reflect an appropriate skill level. Okajima, 261 F.3d at 1355.” slip op. at 17
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“according to the Phillips standard,” and that “no formal claim constructions are necessary for purposes of resolving controversies in this proceeding. Pet. 3. We agree. Given the lack of dispute on this record, we do not perceive the need to construe any claim limitation. Claims must be construed “only to the extent necessary to resolve the controversy.” AstraZeneca AB v. Mylan Pharms. Inc., 19 F.4th 1325, 1345 (Fed. Cir. 2021) (quoting Vivid Techs., Inc. v. American Science & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“Because we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy,’ we need not construe the claim preambles here where the construction is not ‘material to the [obviousness] dispute.’” (citations omitted)).” slip op. at 18
- Expert testimonyPetitioner expert creditedDecided for petitioner
“We find Mr. Bauer’s testimonial evidence persuasive and undisputed as to why a person of ordinary skill, a degreed engineer with two years of experience designing human breast pump equipment, would modify Furrer to use a battery as a power source, and have a reasonable degree of confidence that it would work successfully.” slip op. at 26
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“We find Mr. Bauer’s testimonial evidence persuasive and undisputed as to why a person of ordinary skill, a degreed engineer with two years of experience designing human breast pump equipment, would modify Furrer to use a battery as a power source, and have a reasonable degree of confidence that it would work successfully. Concerning the proposed combination of Furrer and Alvarez, Mr. Bauer testifies why a person of ordinary skill would combine Furrer and Alvarez, explaining that: a POSITA6 would have turned to the teachings of Alvarez to implement Furrer’s vacuum pump using a conventional pump controller having a portable, battery-powered pump to not only increase portability and to allow the user to move about when using the device but also to provide improved control for the system. Ex. 1003 ¶ 138. Mr. Bauer also testifies: a POSITA would have recognized that Alvarez advantageously provides details for such a conventional vacuum pump suitable for safely and controllably delivering negative pressure using a “[c]ontroller 115 [that] “houses the power source and drive mechanism for pumping device 100, and also contains hardware for various functions, such as controlling pumping device 100, milk production quantification, and communication with other devices. 6 “POSITA” is a patent law acronym for a “person of ordinary skill in the art.” Id. ¶ 139 (citing Ex. 1005 ¶ 69). Mr. Bauer further explains that Alvarez discloses that a “pump unit2100 [disclosed in Alvarez] preferably include[es] a controller and processor 2104 as well as a motor 2102 for actuating the device.” Id. (citing Ex. 1005 ¶ 115); see also id. ¶¶ 140–142 (providing “second,” “third,” and “fourth” reasons why a person of ordinary skill would have been motivated to combine Furrer and Alvarez). Mr. Bauer concludes from his analysis that “a person skilled in the art” slip op. at 26
Patent outcomesUS 11,806,454 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,806,454 - Shenzhen Root Technology Co., Ltd. v. Willow Blossom Holdco LimitedAll claims unpatentablePTAB · Jul 30, 2026 · IPR2025-00560 · APJ Barry L Grossman · IPR · Final written decision
Claims 1–29 are unpatentable under each asserted obviousness ground, including Chang and Fang, because Petitioner proved unpatentability by a preponderance of the evidence.
RulingsFinal written decision- Expert testimonyPetitioner expert creditedDecided for petitioner
“Additionally, we note that Patent Owner did not cross-examine Mr. Ryan Bauer, who provided a detailed, 169-page expert report providing, on behalf of Petitioner, his opinions about the issues in this proceeding. See Exhibit 1003. Mr. Bauer’s testimonial evidence in this proceeding remains unrebutted.” slip op. at 3
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art would have had “bachelor’s degree in mechanical engineering or a similar field and at least two years of experience designing human breast pump equipment. More education could substitute for experience and vice versa.” Pet. 8 (citing Ex. 1003 ¶¶ 15–18). Mr. Bauer’s Declaration testimony states he considered some of the factors listed above. Ex. 1003 ¶ 17. Mr. Bauer testifies that based on his background and experience, in his opinion, the level of ordinary skill is as stated by Petitioner. Id. at 18. Based on the prior art, the sophistication of the disclosed technology in the ’381 patent, and Mr. Bauer’s undisputed testimony, we adopt Petitioner’s definition of the level of ordinary skill.” slip op. at 17
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner asserts that the Examiner construed the term “self- contained, in-bra wearable device” to mean “complete, or having all that is needed, in itself’ and is capable of being worn in a bra.” Pet. 8 (citing Ex. 1005, 2290).14 According to Petitioner, “[Patent Owner] did not dispute this construction, and Petitioner applies it herein.” Id. Petitioner contends that all other terms “should receive their plain and ordinary meaning.” Id. We do not perceive the need to construe any claim limitation. Claims must be construed “only to the extent necessary to resolve the controversy.” AstraZeneca AB v. Mylan Pharms. Inc., 19 F.4th 1325, 1345 (Fed. Cir. 2021) (quoting Vivid Techs., Inc. v. American Science & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“Because we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy,’ we need not construe the claim preambles here where the construction is not ‘material to the [obviousness] dispute.’” (citations omitted)).” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“(3) 1[a][1] a diaphragm configured to prevent milk from reaching an air pump by forming a seal around its outer edge; Petitioner relies on Fang for the disclosure of a diaphragm, as stated in this clause. Pet. 25–26. Petitioner asserts the proposed combination of elements suggest a breast pump device that would have used a diaphragm pump including first and second diaphragm housing components and an elastic diaphragm, “in accordance with Fang’s suggestions.” Id. at 25. As also asserted by Petitioner, Fang discloses that flexible diaphragm 7 (i.e., a membrane) is configured to prevent milk from reaching the pump. Id. at 26 (citing Ex. 1009 ¶ 19 (“The elastic diaphragm 7 is used to prevent milk from flowing into the air pump main unit 8.”). Mr. Bauer testifies: The flexible diaphragm [diaphragm 7 in Fang] forms a watertight and airtight seal around its outer edge. In doing so, the diaphragm prevents the passage of milk from reaching the air pump and facilitates generation of negative pressure during operation. Fang also explains that the elastic diaphragm 7 deforms away from the nipple tunnel when a vacuum is created on a pumping chamber, which then creates negative air pressure in the nipple tunnel when a vacuum is created on a pumping chamber.” slip op. at 28
Patent outcomesUS 11,813,381 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,813,381 - Resmed Corp. v. Cleveland Medical Devices, Inc.All claims unpatentablePTAB · Jun 29, 2026 · IPR2025-00246 · APJ Cynthia M Hardman · IPR · Final written decision
Claims 15–29 are unpatentable as obvious over the asserted combinations; the contingent motion to amend claims 30–41 is denied for lack of written-description support.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“Patent Owner filed an authorized Motion to Terminate, alleging that Petitioner failed to name its corporate parent, ResMed Inc., as a real party in interest. Paper 39. Petitioner filed an opposition. Paper 42. Patent Owner filed a reply. Paper 43. We denied the Motion to Terminate. Paper 51.” slip op. at 3
- Skill levelSkill level board ownOther
“understanding of a person of ordinary skill in the art at the time the invention was made.10 See Graham, 383 U.S. at 17–18. The parties agree that a person of ordinary skill in the art (sometimes referred to herein as “POSITA”) would have had: at least a bachelor’s degree in mechanical engineering, electrical engineering, computer science, biomedical engineering, or a similar technical field, with at least two years of relevant product design experience working with diagnostic sensor systems and network data systems, such as networked PAP machines. Additional experience could substitute for less education, and additional education could likewise substitute for less experience. Pet. 3–4 (citing Ex. 1003 (Kirkness Decl.) ¶ 44); PO Resp. 4. 9 Patent Owner does not assert any objective indicia of nonobviousness. See generally PO Resp. 10 For purposes of this Decision, we apply a priority date of November 4, 2005. See supra n.4. Because the proposed level of ordinary skill in the art is consistent with the cited prior art and is undisputed on this record, we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level).” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Patent Owner does not persuade us to construe the term as “a value [or calculated value] that indicates how dire a patient’s symptoms are.” Patent Owner points to nothing in the intrinsic record that purportedly supports this construction, and we agree with Petitioner that “the patent specification’s disclosures regarding determining a level of symptom severity are broad, establishing that it can generally be derived from any sensor data and/or breathing events.” Pet. Reply 3–4; see also Ex. 1001, 3:44–46 (“Signals from the[] sensors are then analyzed to determine the level of severity of the symptoms of the subject’s sleep disorder.”). Patent Owner relies only on expert declarations to support its construction. But as indicated by the Federal Circuit, extrinsic evidence is “less significant than the intrinsic record in determining ‘the legally operative meaning of claim language.’” Phillips v. AWH Corp., 415 F.3d 1303, 1317 (Fed. Cir. 2005). This is especially applicable here, where neither Dr. D’Ambrosio’s nor Dr. Schwartz’s declaration was prepared for this proceeding, and neither declarant was subject to cross examination on their opinions. Moreover, neither of the declarants was opining on claim construction; rather, they were addressing indefiniteness and/or written description issues. See Ex. 1058 at 7 (heading addressing definiteness); Ex. 2026 at 18 (heading addressing written description). Further, Dr. Schwartz appears to have been making an argument about certain patent claims (not the challenged ’333 patent) based on Patent Owner’s own statements made during prosecution of a separate patent application. See Ex. 2026 ¶ 47 (“[T]he similar term used in the ’284 patent claims (‘data of severity of sleep disorder symptoms’) does not find written description support in the specification by a disclosure of the same statistics disclosed in Wright, because CleveMed argued those statistics are not related to severity of sleep disorder symptoms.” (emphasis added)). Patent Owner has not persuaded us that Dr. Schwartz’s testimony has direct applicability to the claim term at issue here. Dr. Borkholder’s testimony is likewise unpersuasive. Aside from citing Dr. D’Ambrosio’s and Dr. Schwartz’s declarations, Dr. Borkholder cites Exhibits 2027 and 2016. These exhibits discuss indices such as AHI and RDI that are used to assess the severity of a patient’s symptoms, but Patent Owner has not adequately explained how they bear on construction of the claim term at issue here, which is not addressed in these exhibits. Ex. 2022 ¶¶ 32–33. Accordingly, we accord Dr. Borkholder’s claim construction opinions little weight, because they are unsupported by reference to objective, corroborating evidence of record. See, e.g., Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985) (“Lack of factual support for expert opinion going to factual determinations . . . may render the testimony of little probative value in a validity determination.”); Xerox Corp. v. Bytemark, IPR2022-00624, Paper 9, 15 (PTAB 2023) (precedential) (explaining that declaration testimony that “is conclusory and unsupported” and which “adds little to the conclusory assertion for which it is offered to support . . . is entitled to little weight”).” slip op. at 23
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“We find that Petitioner has the better argument. Tidal volume refers to “the volume of air that is inspired or expired during a respiratory cycle.” Ex. 2028, 13–14; PO Resp. 10. “[H]ypopnea events are defined as a reduction of ≥50 % or 74 % in tidal volume from baseline and apnea events as absence of tidal volume for at least 10s.” Ex. 2028, 13–14 (emphasis omitted). Toge teaches that a control unit analyzes collected data (e.g., the flow rate) and calculates tidal volume. Ex. 1044 (Toge) ¶¶ 34–38. The calculated tidal volume is “a quantified level of severity data based on the subject’s sleep apnea symptoms during the therapy” because it represents, e.g., the “level of airway obstruction the patient experiences during the sleep apnea treatment using the PAP device.” Pet. 15. As Dr. Chatterjee explains: Toge discloses that tidal volume Fp is a quantified level of data because Toge discloses that Fp is monitored with respect to threshold values (id., [0051]) and because Fp is a function of Ft, Fa, and Fb, which are quantitative values. Toge discloses that tidal volume Fp is severity data because Toge discloses that tidal volume is indicative of whether the patient’s breathing warrants “emergency measures” (id., [0039]) and whether to “send an alert” in “an emergency where the patient’s breathing has drastically weakened” (id., [0055]). . . . . Because Toge discloses determining tidal volume (determine a quantified level of severity data) based on Ft, Fa, and Fb (id., [0035]), which corresponds to the subject’s condition (subject’s sleep apnea symptoms) while using the device (during the therapy) (id., [0036], [0037]), Toge discloses determin[ing] a quantified level of severity data based on the subject’s sleep apnea symptoms during the therapy. Ex. 1005 (Chatterjee Decl.) ¶¶ 122–125. Patent Owner’s attempt to dismiss tidal volume as a mere “breathing metric” is unavailing. First, Petitioner correctly “notes that in the paragraph PO cites to in Dr. Schwartz’s declaration, he indicates that breathing metrics are a level of severity data.” Pet. Reply 8 (citing Ex. 2026 ¶ 46 (“standard sleep disordered breathing metrics” [ ] were well validated indicators of the type and severity of sleep disordered breathing”)). Second, Dr. Kirkness explains that tidal volume represents the level of airway obstruction, e.g., apnea “is the most severe form of reduction in airflow [and] the absence of airflow results in quantified tidal volume of zero milliliters per breath.” Ex. 1003 (Kirkness Decl.) ¶¶ 157, 159; see also PO Resp. 10–11 (Patent Owner recognizing that an apnea is defined as absence of tidal volume for at least 10 seconds). The calculated tidal volume thus indicates severity because it is used to adjust the PAP system, e.g., in the case of decreasing tidal volume, a medical professional can change the airflow settings “to counter/treat the more severe level of airway obstruction observed from the decreasing tidal volume.” Ex. 1003 (Kirkness Decl.) ¶ 158; Pet. 15–16; Ex. 1044 (Toge) ¶ 39.” slip op. at 26
Patent outcomesUS 11,857,333 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,857,333 - Resmed Corp. v. Cleveland Medical Devices, Inc.No claims unpatentablePTAB · Jun 29, 2026 · IPR2025-00247 · APJ Cynthia M Hardman · IPR · Final written decision
Claims 1–19 were not shown unpatentable under any of six obviousness grounds because Truitt did not teach or suggest the claimed severity calculation and index, and the Mumford combinations lacked the required sensor disclosures.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“Patent Owner filed an authorized Motion to Terminate, alleging that Petitioner failed to name its corporate parent, Resmed Inc., as a real party in interest. Paper 29. Petitioner filed an opposition. Paper 31. Patent Owner filed a reply. Paper 32. We denied the Motion to Terminate. Paper 40.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“disorder symptoms” require a “quantitative” calculation or use of an algorithm, we also disagree. See PO Resp. 14–16. First, nothing in the language of the claims themselves describes or requires a “quantitative” calculation or an algorithm. See generally Ex. 1001, 23:6–26:59. To be sure, the ’029 patent discloses embodiments that use known algorithms to “quantify the level of severity of the subject’s sleeping disorder or symptoms.” See, e.g., id. at 20:16–19. But the Specification does not require an algorithm. The Specification also indicates that quantification is merely “preferable” (i.e., not required), and is merely one embodiment. See, e.g., id. at 19:8–12 (“The signals from the one or more sensors used in various embodiments of the present invention are preferably analyzed using a processor and software that can quantitatively estimate or determine the severity of the subject’s sleeping disorder or symptoms.”) (emphasis added), 4:51–59 (“Finally, in still another embodiment, the present invention includes a sleeping disorder treatment system comprising a device for diagnosing and creating a quantitative output of a level of severity of a subject’s sleeping disorder or symptoms . . . .”) (emphasis added); see also Reply 5–6 (citing Ex. 1001, 4:3–59 and 19:8–12 and stating that the ’029 patent lists “numerous embodiments where only one of seven include a quantitative assessment”). Elsewhere, the Specification more generally states that signals from sensors are “analyzed to determine the level of severity of the symptoms,” without specifying that such analysis must be “quantitative” or performed by an algorithm. See Ex. 1001, 3:41–44. In view of these disclosures, Patent Owner does not persuade us to adopt its narrowing claim construction. Indeed, our reviewing court has “repeatedly warned against confining the claims” to specific embodiments disclosed in the Specification. Phillips, 415 F.3d at 1323. Patent Owner’s reliance on a prior Board decision in PGR2024- 00012, which related to the parent of the ’029 patent, is unavailing. See PO Resp. 15–16. We agree with Petitioner that in the cited case, “[t]he Board made no findings about the meaning of the term calculating ‘the data of a severity of the sleep disorder symptoms of the subject’ for claim construction.” Reply 8. Indeed, neither party offered any claim construction, and the Board determined that no claim construction was necessary for purposes of that decision. See ResMed Corp., PGR2024- 00012, Paper 7 at 8. The page of the decision Patent Owner cites addresses written description support in the specification for the claims challenged in that PGR, not claim construction. See id. at 16. In any event, the cited decision is a decision on institution. The Board’s statements there are, by nature, preliminary findings and conclusions based on a preliminary record, and are not binding here. For at least the above reasons, Patent Owner does not persuade us to adopt its narrowing claim construction and we find that the term “data of a severity” does not need construction because the words of the term are clear on their face.” slip op. at 31
- Strike new argumentNew argument disregardedDecided for patent owner
“skilled artisan would have incorporated only portions of Mumford’s algorithm into Truitt’s PAP (i.e., only those portions related to “the detection of sleep disordered events” and not the portions of the algorithm related to “determin[ing] sleep stage”) comes too late because this argument was not in the Petition. See, e.g., Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286–87 (Fed. Cir. 2017) (rejecting petitioner’s “attempts to cure the petition’s deficiencies in its subsequent briefing to the Board”). The Petition does not discuss modifying Mumford’s sleep efficacy algorithm before incorporating it into Truitt’s PAP device or incorporating only certain features of the algorithm. Indeed, the Petition and Dr. Kirkness rely on Mumford’s ability to detect sleep arousals when mapping Mumford to the claimed “data of a severity” and “index.” See Pet. 69–70; Ex. 1003 (Kirkness Decl.) ¶¶ 323–325. Mumford discloses that the mask electrodes detect arousals. See Ex. 1009 (Mumford) 2:4–10, 11:39–48. The same lack of disclosure plagues Petitioner’s belated Reply argument that Truitt’s ports 74 and 76 can incorporate electric sensing elements that would have functioned similar to Mumford’s electrodes. See Reply 22. The Petition did not mention ports 74 and 76 or otherwise suggest that a skilled artisan would have added functionality similar to Mumford’s electrodes to Truitt’s PAP, and we find that it is too late on Reply for Petitioner to posit this modification.” slip op. at 40
- Expert testimonyPetitioner expert creditedPatent owner expert creditedMixed
“significant than the intrinsic record in determining ‘the legally operative meaning of claim language.’” Phillips v. AWH Corp., 415 F.3d 1303, 1317 (Fed. Cir. 2005). This is especially applicable to Dr. Jafari’s opinions. His declaration was not prepared for this proceeding and thus Dr. Jafari was not subject to cross examination in this proceeding. See Reply 6 n.3. Moreover, Dr. Jafari was not opining on claim construction; rather, he was addressing the alleged indefiniteness. See Ex. 2020 (Jafari Decl.) 12 (heading addressing definiteness), ¶¶ 41–42, 46. Additionally, paragraphs 41–42 of Dr. Jafari’s declaration discuss claim terms phrases in a different patent (US 11,375,921), which explicitly include the terms “quantified” and “quantitative.” See Reply 6–7; Ex. 2020 (Jafari Decl.) ¶ 34. For at least these reasons, Patent Owner has not persuaded us that Dr. Jafari’s testimony is applicable here. Further, regarding the portion of Patent Owner’s proposed construction reciting “the degree of deviation from the baseline characteristics of a patient without sleep disorder symptoms,” Dr. Borkholder does not do his own analysis, but instead simply states that he “agree[s] with the litigation claim construction opinions of Dr. Jafari.” Ex. 2019 (Borkholder Decl.) ¶ 53. This is insufficient, and thus we do not credit Dr. Borkholder’s testimony regarding claim construction. We instead credit Dr. Kirkness’s statement that “[s]everity data is frequently calculated as the deviation from baseline characteristics of the patient himself, not a generic person ‘without sleep disorder symptoms.’” Ex. 1071 (Kirkness Reply Decl.) ¶ 13; Reply 9. As Dr. Kirkness explains, and Patent Owner does not dispute (see generally Sur-reply), “[t]he ‘baseline characteristics of a [generic] patient without sleep disorder symptoms’ would be irrelevant to any particular patient with their own unique breathing patterns and sleep disorder symptoms.” Ex. 1071 (Kirkness Reply Decl.) ¶ 13 (second alteration in original). For at least these reasons, we reject Patent Owner’s proposed claim construction.” slip op. at 30
Patent outcomesUS 11,872,029 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,872,029 - Resmed Corp. v. Cleveland Medical Devices, Inc.No claims unpatentablePTAB · Jun 5, 2026 · IPR2025-00160 · APJ Sheridan K Snedden · IPR · Final written decision
Claims 1–5, 7, 8, 10–13, 15–18, and 20–31 were not shown unpatentable because the proposed Toge-Kumar combination did not establish the claimed remote internet site hosted on a server.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“Patent Owner filed a Response. Paper 23 (“PO Resp.”). Petitioner filed a Reply. Paper 27 (“Reply”). Patent Owner filed a Sur-reply. Paper 35 (“Sur-reply”). Additionally, during trial, Patent Owner filed an authorized Motion to Terminate, alleging that Petitioner failed to name a real party in interest (namely, Petitioner’s corporate parent, Resmed Inc.). Paper 37. Petitioner filed an opposition. Paper 38. Patent Owner filed a reply. Paper 39. We denied the Motion to Terminate. Paper 44.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We determine that no express construction of any claim term is necessary to resolve the dispute between the parties. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). To the extent further discussion of the meaning of any claim term is necessary to our decision, we provide that discussion below in our analysis of the asserted grounds of unpatentability. C. Level of Ordinary Skill in the Art” slip op. at 11
- Skill levelSkill level petitioner adoptedDecided for petitioner
“We adopt Petitioner’s proposed level of ordinary skill in the art because it appears to be consistent with the cited prior art and is undisputed on this record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level). D. Summary of the Asserted Prior Art” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“summarized above, we determine that a person of ordinary skill in the art would not have implemented Toge’s physician-side computer as a web server using a “localhost” architecture as proposed by Petitioner because such a configuration cannot communicate with external devices over the public internet, a deficiency that directly contradicts Petitioner’s stated motivations for the combination of permitting broad data access. Petitioner’s expert, Dr. Chatterjee, expressly acknowledged in his Reply Declaration that when a client and server reside on the same machine, the communications between them do not traverse the internet. Ex. 1069 ¶ 8. Specifically, Dr. Chatterjee cited the Microsoft Computer Dictionary’s definition of “localhost” as “[t]he name that is used to represent the same computer on which a TCP/IP message originates,” noting that “[a]n IP packet sent to localhost has the IP address 127.0.0.1 and does not actually go out to the Internet.” Id. (citing Ex. 1070, 316). Accordingly, Petitioner’s proposed configuration of placing both the client and web server on Toge’s physician-side computer would create a closed loop of communication that does not reach the broader network. Id. As noted by Patent Owner, “[i]f ‘the physician-side computer and the web server are on one machine,’ the local web server would not communicate with other devices via the Internet.” Sur-Reply, 3–4 (comparing Ex. 1069 ¶ 19 with id. at ¶ 8). Thus, the consequence of Petitioner’s proposed Toge-Kumar configuration is that other devices in the system, such as the PAP device that generates the treatment data and any remote client devices that might need to access that data, would be unable to send data to or retrieve data from the localhost web server. Patent Owner persuasively argues, supported by evidence of record, that under Petitioner’s proposed configuration, “the PAP device could not send data thereto nor could other clients receive data therefrom, as only the local client browser can exchange data.” Id. (citing Ex. 1069 ¶ 8); see Ex. 2003, 4 (one-tier architecture “is not suitable for a web application” because “it can only access data available in a single computer or server” and therefore “is not suitable for a web application.”); Ex. 2022, 3 (Unlike more advanced multi-tier systems, a one-tier architecture “cannot transmit information from one client machine to another.”); Ex. 2020, 4 (While “the client process and server process can be on the same computer,” this architecture “is rarely used today” precisely because it cannot “take advantage of the distributed computing environment.”).” slip op. at 29
Patent outcomesUS 11,786,680 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,786,680 - Resmed Corp. v. Cleveland Medical Devices, Inc.No claims unpatentablePTAB · Jun 4, 2026 · IPR2025-00158 · APJ Sheridan K Snedden · IPR · Final written decision
Claims 1–20 were not shown unpatentable because Orbach did not disclose a single computer or processor performing all claimed remote analysis, output, and display functions.
RulingsFinal written decision- BurdenNot shown unpatentable
“After considering all of the arguments and evidence presented on the full trial record, we determine that Petitioner has not demonstrated by a preponderance of the evidence that claims 1–6, 8–17, 19, and 20 are unpatentable as obvious over the combination of Ciulla and Orbach. We find that the deficiencies in Petitioner’s arguments regarding claim limitations [1.d], [1.f], and [1.g] are dispositive and we address the parties’ arguments concerning those limitations below.” slip op. at 24
- Skill levelSkill level petitioner adoptedOther
“Pet. 8. Patent Owner agrees to apply Petitioner’s proposed definition of POSITA. PO Resp. 4. We adopt Petitioner’s proposed definition of a POSITA because the proposed level of ordinary skill in the art appears to be consistent with the cited prior art and is undisputed on this record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level).” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“the Board need not construe any terms. Pet. 9. Patent Owner agrees. PO Resp. 4. We determine that no express construction of any claim term is necessary to resolve the dispute between the parties. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Nevertheless, in our analysis of the asserted grounds of unpatentability below, we discuss the scope of certain claim terms, e.g., “the computer” and “the processor.” C. Level of Ordinary Skill in the Art” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Accordingly, to show obviousness, Petitioner must show in Orbach that either (a) remote server 140’s output to viewing station 150 constitutes “display” within the meaning of the claim, or (b) viewing station 150 receives data “over cell towers” notwithstanding the intervening server. We determine that Petitioner has failed to do so on this record. Our analysis follows.” slip op. at 33
Patent outcomesUS 11,690,512 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,690,512 - Resmed Corp. v. Cleveland Medical Devices, Inc.No claims unpatentablePTAB · May 18, 2026 · IPR2025-00159 · APJ Cynthia M Hardman · IPR · Final written decision
Claims 1, 2, 4, 5, 7–9, 11–14, and 16 were not shown unpatentable under either § 103 ground because Petitioner did not establish the proposed remote internet site modification.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for patent ownerDecided for patent owner
“Patent Owner filed an authorized Motion to Terminate, alleging that Petitioner failed to name a real party in interest (namely, Petitioner’s corporate parent, Resmed Inc.). Paper 37. Petitioner filed an opposition. Paper 38. Patent Owner filed a reply. Paper 39. We denied the Motion to Terminate. Paper 44.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“understanding of a person of ordinary skill in the art at the time the invention was made.8 See Graham, 383 U.S. at 17–18. The parties agree that a person of ordinary skill in the art (sometimes referred to herein as a POSITA) would have had: at least a bachelor’s degree in mechanical engineering, electrical engineering, computer science, biomedical engineering, or a similar technical field, with at least two years of relevant product design experience working with diagnostic sensor systems and network data systems, such as networked PAP machines. Additional experience could substitute for less education, and additional education could likewise substitute for less experience. Pet. 12–13 (citing Ex. 1003 (Kirkness Decl.) ¶¶ 44–46); PO Resp. 7–8. Because the proposed level of ordinary skill in the art is consistent with the cited prior art and is undisputed on this record, we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level).” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We find it unnecessary to construe any claim term to resolve the issues in this case. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“its burden of explaining why a person of ordinary skill in the art would have implemented a remote internet site in Toge’s system in the specific fashion Petitioner asserts (i.e., using the physician-side computer as a web server). As Patent Owner aptly states, the operative question is not merely whether a person of ordinary skill in the art would have modified Toge’s system to include a remote internet site, but whether the artisan would have modified Toge’s system to include a remote internet site “on a physician’s client computer” in accordance with the specific implementation argued by Petitioner. Sur-reply 2. On this critical question, Petitioner’s arguments are thin. Petitioner’s declarant Dr. Kirkness states that a person of ordinary skill in the art “would have understood that one common way to access data transmitted over the internet, like the data from Toge’s wireless PAP device, is via a remote internet site.” Ex. 1003 ¶ 214. This assertion is reasonable. Indeed, prior art of record, such as Kumar, illustrates use of a central server that hosts a browser-based engine that can be accessed through web pages. See, e.g., Ex. 1008 (Kumar) Fig. 1A, ¶¶ 67, 72, 79, Pet. 10. Petitioner, however, elected to argue a specific implementation, namely that the skilled artisan would have modified Toge’s physician-side computer to operate as a web server. See, e.g., Pet. 15; Ex. 1005 (Chatterjee Decl.) ¶ 146; Reply 4. We find that this implementation is unsupported on this record. Petitioner has not pointed us to any disclosure in Toge, Burton, or Kumar (or any other prior art reference of record) that teaches or suggests “that a doctor’s computer should act a web server hosting sensitive patient data.” PO Resp. 9 (emphasis added). And critically, the Petition is silent as to why a person of ordinary skill in the art would have selected this implementation in particular. See, e.g., Pet. 49.” slip op. at 25
Patent outcomesUS 11,375,921 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,375,921 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00187 · APJ Debra L Dennett · IPR · Final written decision
Claims 1–17 are unpatentable under § 103, principally because Chang in view of Jin renders them obvious; the Jin/Feldmann grounds were not shown.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 24. Patent Owner does not address claim construction. See generally Resp.; Sur-reply. For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 11
- Expert testimonyPatent owner expert creditedDecided for patent owner
“gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard. Without an apparent reason to modify the teachings of Jin and Feldmann to” slip op. at 19
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“On this complete trial record, we agree with Patent Owner. It is improper to base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 17
Patent outcomesUS 10,230,009 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,230,009 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00006 · APJ Debra L Dennett · IPR · Final written decision
Claims 1–17 are unpatentable under § 103, principally over Chang and Jin; the Board rejected the Jin and Feldmann combinations for lack of a reason to combine.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In light of the record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’009 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’009 patent and the prior art.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 24. Patent Owner does not address claim construction. See generally Resp.; Sur-reply. For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“However, Petitioner proposes to remove the tunnel oxide layer from the edge and offers little explanation of why the skilled artisan would apply Jin’s gap- T isolation region to both of Feldmann’s polysilicon and tunnel oxide layers. As noted above, Petitioner states that the skilled artisan would have included Jin’s gap-T isolation region in order to prevent shorting. Pet. 26. Petitioner’s reasoning is questionable—supported only by the conclusory testimony of Dr. Banerjee. Dr. Banerjee’s testimony offers no more evidentiary support than provided in the Petition. Compare Ex. 1003 ¶ 116 with Pet. 26). Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” See Magnum, 829 F.3d at 1380. We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard.” slip op. at 19
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“configuration in which the emitter area and back surface field area are not adjacent to each other, thus eliminating “the necessity of performing an isolation process when the emitter area [] and the back surface field are [] are formed to be adjacent to each other.” Resp. 42 (citing Ex. 1013 ¶ 76). In so doing, Patent Owner side steps Chang’s unambiguous definition that “‘entirely formed’ means that an element such as a layer is formed over an entire surface without an empty area or a non-coverage area, or is formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62 (emphasis added). Chang discloses that a first tunneling layer, a first portion of an emitter area, a second tunneling layer, and a back surface field area may each be “formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Id. Chang’s definition of “entirely formed” (“excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like”) implies use of a mask. See Chang ¶ 62; Tr. 15:20–17:11. Dr. Banerjee testifies that the need to electrically isolate the emitter region from the back surface field was well known in the field, and both Chang and Jin teach backside isolation regions. Ex. 1003 ¶¶ 73, 217 (citing Ex. 1023 § 1). Chang also discloses that the emitter area may be formed by thermal diffusion, ion implantation or the like. Ex. 1013 ¶ 98. Petitioner persuasively argues that Chang’s disclosure of thermal diffusion of the emitter layer would result in dopants diffused into not only the top surface of the substrate, but also the exposed lateral surfaces, a problem also noted in Jin. See Pet. 11–12; Reply 6–7; Ex. 1003 ¶ 71; Ex. 1009 ¶¶ 57–58. Jin discloses avoiding shorting of the emitter layer and back surface field layer by edge isolation on the back surface field layer using a mask to create a “gap-T.” Ex. 1009 ¶¶ 57–58, 83. Chang discloses excluding a tunneling layer and a base surface field area from periphery region and isolation region. Ex. 1013 ¶¶ 56, 62. Using a mask, as implied in Chang and explicitly disclosed in Jin, would “pre-designate” and/or “inevitably form” the regions where the tunneling layer and back surface field area are excluded. We credit Dr. Banerjee’s testimony that one of ordinary skill in the art reviewing Chang would therefore understand the importance of implementing the isolation region in Chang’s device, and would therefore be motivated to look to other references, such as Jin (which was assigned to the same original assignee as Chang, LG Electronics, EX1009-Jin, face; EX1013-Chang, face) to understand details regarding Chang’s isolation region.” slip op. at 32
Patent outcomesUS 10,230,009 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,230,009 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00918 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1–11 are unpatentable under § 103 over Chang and Jin; the Board rejected the Jin and Feldmann based grounds for lack of a reason to combine without hindsight.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 23. And, Patent Owner does not address claim construction. See generally PO Resp. As neither party proposes an express construction for our consideration and because we determine that an express claim construction is not necessary for us to render a decision in this matter, we do not construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“Patent Owner focuses on Chang’s description in paragraph 76 of a single configuration in which the emitter area and back surface field area are not adjacent to each other, thus eliminating “the necessity of performing an isolation process when the emitter area [] and the back surface field are [] are formed to be adjacent to each other.” PO Resp. 42–43 (citing Ex. 1013 ¶ 76). But, in so doing, Patent Owner side steps Chang’s unambiguous definition that “‘entirely formed’ means that an element such as a layer is formed over an entire surface without an empty area or a non-coverage area, or is formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62 (emphasis added). Chang discloses that a first tunneling layer, a first portion of an emitter area, a second tunneling layer, and a back surface field area may each be “formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62. Chang’s definition of “entirely formed” (“excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like”) implies use of a mask. See Ex. 1013 ¶ 62; Tr. 15:20– 17:11. Dr. Banerjee testifies that the need to electrically isolate the emitter region from the back surface field was well known in the field, and both Chang and Jin teach backside isolation regions. Ex. 1003 ¶¶ 70–81, 91–96, 200 (citing Ex. 1026 § 1 and stating that “[b]oth Chang and Jin likewise teach backside isolation regions”). Chang also discloses that the emitter area may be formed by “thermal diffusion, ion implantation or the like.” Ex. 1013 ¶ 98. Petitioner persuasively argues that Chang’s disclosure of thermal diffusion of the emitter layer would result in dopants diffused into not only the top surface of the substrate, but also the exposed lateral surfaces, a problem also noted in Jin. See Pet. 11–12; Pet. Reply 6–7; Ex. 1003 ¶ 71; Ex. 1009 ¶¶ 57–58. Jin discloses avoiding shorting of the emitter layer and back surface field layer by edge isolation on the back surface field layer using a mask to create a “gap-T.” Ex. 1009 ¶¶ 57–58, 83. Chang discloses excluding the second tunneling layer and a base surface field area from periphery region and isolation portion. Ex. 1013 ¶¶ 56, 62. Using a mask, as implied in Chang and explicitly disclosed in Jin, would “pre-designate” and/or “inevitably form” the regions where the tunneling layer and back surface field area are excluded. We credit Dr. Banerjee’s testimony that one of ordinary skill in the art “reviewing Chang would therefore understand the importance of implementing the isolation region in Chang’s device, and would therefore be motivated to look to other references, such as Jin (which was assigned to the same original assignee as Chang, LG Electronics, EX1009-Jin, face; EX1013-Chang, face) to understand details regarding Chang’s isolation region.” Ex. 1003 ¶ 201.” slip op. at 33
Patent outcomesUS 9,722,104 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,722,104
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.