- PTAB · Sep 19, 2025 · PGR2025-00025 · APJ Kimberly Mcgraw · PGR · Institution
The Board instituted PGR on claims 1–19 and all asserted grounds, finding it more likely than not that claim 1 is anticipated by the Gatorade Label.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Post-grant review is available for patents that issue from applications that at one point contained at least one claim with an effective filing date on or after March 16, 2013. See Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), §§ 3(n)(1), 6(f)(2)(A). After considering the briefing and the evidence of record, for the reasons set forth below, we determine that Petitioner has shown that the ’422 Patent is eligible for post-grant review and has shown it is more likely than not that at least one challenged claim of the ’422 Patent is unpatentable under § 324(a). Accordingly, we institute a post-grant review of the challenged claims of the ’422 Patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would possess at least (1) a Bachelor’s degree in chemistry or a related field, with (2) five years of experience in material identification and characterization using multiple analytical methods and field sampling, or equivalent research or professional experience.” Pet. 12 (citing Ex. 1014 ¶ 24). Patent Owner does not dispute Petitioner’s definition for one of ordinary skill in the art nor provide a proposed definition of its own. See generally Prelim. Resp. For the purposes of this Decision, we adopt Petitioner’s undisputed proposal regarding the level of one of ordinary skill in the art.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer foundDecided for patent owner
“336. The applicant explained that not all combinations of shrink films and light blocking materials are recyclable. Id. at 335. The applicant explained that films can be compatible with PET recycling in two ways, (1) the film can float in water and be separated from PET that sinks in water or (2) the PET films crystallize and “can be recovered with the PET stream.” Id. at 336 (citing “A Resource Document by the Association of Plastic Recyclers (APR)”) (found at Ex. 1002, 323–332) (emphasis omitted). The applicant explained that “removing the label before or during the recycling process is not evidence of the recyclability of the label” and that “[r]emoving the label during the recycling process is not equivalent to actually recycling the label.” Id. at 335. As such, a POSITA reading the prosecution history would understand that a label is not recyclable with a PET container, as recited by the independent claims, by removing the label from the PET recycle stream before or during the recycling process.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“To determine how a person skill in the art would determine if a shrink label is “recyclable” as recited in the independent claims, we look to how the Specification of the ’422 Patent describes or defines recyclable shrink labels. For example, the ’422 Patent states that PET shrink films are generally considered recyclable if no inks are retained on the film after a caustic wash cycle typically used in PET reclaiming processes. Ex. 1001, 6:61–65. The ’422 Patent further states that labels are fully recyclable if the polymers used are clear, preferably clear PET, and the labels include inks that can be washed off in a “typical PET recycling wash (caustic wash).” Id. at 11:44– 49; see also id. at 11:49–54 (describing embodiments in which the labels are free or substantially free of inks that cannot be washed off in a caustic wash or where the labels are free or substantially free of color plastics that cannot be recycled). The ’422 Patent further discusses “industry standards” for determining whether various embodiments of shrink labels are recyclable. See, e.g., id. at 11:29–53. For example, the Specification states that the “Association for Plastic Recyclers (APR) Critical Guidance Protocol for Clear PET Articles with Labels and Closures (PET-CG-02)” (Ex. 1005) can certify that a film is fully recyclable with a container or bottle. Id. at 11:34– 38. Additionally, the Specification states that labels “are recyclable according to the Evaluation of the Near Infrared (NIR) Sorting Potential of a Whole Plastic Article (SORT-B-01)” (Ex. 1010) and/or the “Evaluation of Sorting Potential for Plastic Articles Utilizing Metal, Metalized, or Metallic Printed Components (SORT-B-03)” (Ex. 1011). Ex. 1001, 11:39–44. The ’422 Patent further states that embodiments of the labels “are fully recyclable. For example, the labels may include inks that can be washed off in a typical PET recycling wash (caustic wash) and the polymers” are preferably clear PET. Id. at 11:44–48. The ’422 Patent thus provides various descriptions or standards to determine the recyclability of shrink labels. For the purposes of addressing the anticipation and obviousness grounds, we determine that any of these standards can be used to determine if a shrink label is “recyclable.” We note that our construction is preliminary and is based on the present record. We invite the parties to further the address the construction of “wherein the recyclable shrink label is recyclable with a PET container” during trial.” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · NautilusPatents in suitUS 11,961,422 - Champion Laboratories, Inc. / First Brands Group, LLC v. Hengst SENo claims unpatentablePTAB · Sep 8, 2025 · IPR2024-00603 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1, 3, 5, 8–11, 15–17, 19, 23–25, and 28–30 were not shown unpatentable over Yokoyama, Yokoyama and Cline, or Honermann and Cline.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Because the level of ordinary skill in the art is not in dispute, and because the parties’ definition is consistent with the disclosures in the ʼ203 patent, the prior art, and the declaration testimony of Mr. Nranian and Dr. Basirat, we view the prior art and arguments through this lens when determining whether the claims are unpatentable as obvious over the prior art.5 See Graham, 383 U.S. at 17 (identifying “the level of ordinary skill in the pertinent art” as an underlying factual inquiry to be resolved in deciding obviousness, which is a question of law).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Although the parties spend significant portions of their briefing discussing the term “eccentric” and how it applies to certain figures from the ʼ203 patent and the relied-upon prior art, we determine that it is not necessary to expressly construe the term “eccentric” beyond the parties’ agreed-upon definition. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Expert testimonyPetitioner expert discountedDecided for patent owner
“(opining that “Patent Owner’s construction of ‘having an axis no located in a geometric center’ is too narrow”). Mr. Nranian’s Declaration testimony in this respect is not persuasive for several reasons. First, it is internally inconsistent. Compare Ex. 1016 ¶ 3 (criticizing the “axis” language in Patent Owner’s definition), with id. ¶¶ 9, 11 (relying on that very language to support an argument). Also, Mr. Nranian’s proposed definition of “eccentric” to merely mean “not located at the center” begs the question of what, precisely, is “the center”? Mr. Nranian does not persuasively explain how far a person of ordinary skill in the art would understand she could travel from the exact center point of an object and still be in “the center” of that object. See Tr. 10:13–19 (Judge McGee asking whether the center is “a miniscule point in the middle of [the] disc”); see also id. at 10:25–12:26 (Judge Weatherly highlighting the significant ambiguity in referring to something as in “the center”). Also, Mr. Nranian’s opinion is inconsistent with how the ʼ203 patent compares something that is “central,” i.e., “at the center,” and something that is “eccentrically” located. Ex. 1001, 7:13–14 (describing pipe nozzle 15 as “central”); id. at 8:53–56 (describing a “through hole” as “located in the center of the front panel 22” depicted in Figures 7 and 8); id. at 10:23–31 (describing return 12 as “in the center” and outlet 13 as “eccentrically thereto” in Figure 17). Patent Owner’s colorized and annotated Figure 7 is reproduced below: Patent Owner’s colorized and annotated version of Figure 7 of the ʼ203 patent illustrates “central pipe nozzle 15” in yellow passing through the “through hole” located in “the center” of front panel 22. PO Resp. 20. Significantly, pipe nozzle 15 and the through hole in panel 22 are both described as “central” and in “the center” but must have different diameters; otherwise, “central pipe nozzle 15” would not be capable of traveling through “through hole 22.” Ex. 1001, Fig. 7. Thus, the ʼ203 patent intrinsically bases whether an element is “central” or “in the center” on whether its axis is located at the geometric center. This is also illustrated in Figure 17 of the ʼ203 patent, reproduced below: Figure 17 of the ʼ203 patent illustrates filter housing 10 with return 12 “in the center . . . and, eccentrically thereto, the outlet 13 with the seat 14 for the blocking element 24.” Ex. 1001, 10:23–30. Finally, Mr. Nranian’s narrow interpretation of “eccentric”––which excludes the “having the axis or support so located” in the geometric center language––is at odds with the arguments it was proffered to support. Cf. Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”).” slip op. at 29
Patent outcomesUS 9,023,203 not shown unpatentableClaim construction§ 103 obviousnesscites GrahamPatents in suitUS 9,023,203 - PTAB · Apr 25, 2025 · IPR2024-01463 · APJ David Cotta · IPR · Institution
The Board instituted inter partes review of claims 1–10 on all asserted grounds, finding a reasonable likelihood of success on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“predict how the district court in the related district court litigation will proceed because the court may determine whether or not to stay any individual case . . . based on a variety of circumstances and facts beyond our control and to which the Board is not privy.” Sand Revolution II LLC v. Cont’l Intermodal Grp., IPR2019-01393, Paper 24, 7 (PTAB June 16, 2020) (informative). We decline to speculate on how the court may rule on the pending motion to stay. Accordingly, this factor is neutral.” slip op. at 13
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), inter partes review may not be instituted unless the Petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Petitioner has established a reasonable likelihood of prevailing on its assertion that at least one of the challenged claims is unpatentable based on the grounds advanced here. We decline to deny the Petition on a discretionary basis as requested by Patent Owner. Thus, for reasons explained below, we institute inter partes review of claims 1–10 of the ’706 patent.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“TC(220), and ΔRz/Ra are result effective variables and that copper foils having ΔPD, TC(220), and ΔRz/Ra values that meet the values recited in claim 1 have advantageous properties. See, e.g., Ex. 1005 ¶ 45 (Kim ’761, disclosing that preferably the “difference in peak count roughness Rpc between the shiny surface . . . and the matte surface . . . of the electrolytic copper foil . . . is preferably 60 or less” because “when the difference in the peak count roughness Rpc exceeds 60 capacity maintenance of the secondary battery is deteriorated.”);15 Ex. 1007, 3:16–23, 4:14–23 (Cheng, disclosing that the foils of Cheng’s invention have (220) and (311) surfaces that provide increased elongation and that solve a high roughness problem that rendered traditional products unsuitable for use in a lithium ion secondary battery), 10:27–34 (Cheng, disclosing that in the foils of Cheng’s invention “the roughness difference between both sides was extremely small” and thus “it was . . . not easy for the electrolytic copper foil to break or fracture during the charging-discharging cycles and the life of a battery is thus increased”), Tables 3 & 4 (Cheng, disclosing embodiments and comparative examples with TC(220) values meeting the requirements of claim 1); Ex. 1008, 6:36–44 (Wolski, disclosing that “the surface roughness Rz at the matte side of the untreated copper foil of the present invention is the same or smaller than the surface roughness Rz at the shiny side . . . so that the surface treated copper foil . . . becomes more low-profiled . . . whereby it becomes a foil having a large etching factor”), 9:1–29 & Table 2 (Wolski, disclosing 15 Dr. Randall testifies that “Kim ’761’s peak count roughness Rpc corresponds to the peak density PD of the ’706 patent.” Ex. 1003 ¶ 52. At this stage in the proceeding, this testimony is unrebutted. 38 embodiments meeting the ΔRz/Ra of claim 1, describing them as having “matte side roughnesses” that are “sufficiently small,” and as having “excellent” “high temperature elongation characteristics”), 11:37–41 (Wolski, describing comparative examples as having “large” matte side roughnesses “whereby etching factors are not good”), 12:12–27 (Wolski, teaching that “as compared with a conventional untreated copper foil, both surfaces of the untreated copper foil obtained by [Wolski’s] invention are flat” resulting in a low profile foil that has “excellent elongations at room temperature and high temperature and also high tensile strength”). The teachings in the prior art support the presently unrebutted testimony of Dr. Randall explaining why the POSA would have been motivated to modify Kim ’761’s copper foil to have the claimed TC(220) and ΔRz/Ra. Ex. 1003 ¶¶ 66–68, 71–74; Pfizer Inc., v. Sanofi Pasteur Inc., 94 F.4th 1341, 1348 (Fed. Cir. 2024) (“Where [a gap in prior art] includes a parameter not necessarily disclosed in the prior art, it is not improper to consider whether or not it would have been recognized as result-effective. If so, then the optimization of that parameter is ‘normally obvious.’”). Accordingly, we are not persuaded by Patent Owner’s argument that Petitioner failed to articulate a sufficient motivation to combine the references. To the contrary, the preliminary record presents a strong showing that the POSA would have been motivated to combine the references in the manner described in the Petition.” slip op. at 38
- Skill levelSkill level petitioner adoptedDecided for petitioner
“At this stage of the proceeding, Patent Owner does not contest Petitioner’s definition of the level of skill in the art. Prelim. Resp. 4 (“For purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art”). Petitioner’s definition appears to be consistent with the field of the invention reflected in the prior art of record and the disclosure of the ’706 patent. Accordingly, for purposes of this Decision, we adopt Petitioner’s proposed definition of the person of ordinary skill in the art.” slip op. at 21
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 11,591,706 - Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution deniedPTAB · Apr 25, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable under the asserted obviousness grounds.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“experience working on the development of materials or components for electronic devices such as batteries.” Pet. 2. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less work experience, and additional work experience could compensate for less formal education.” Id. Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’014 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). in this proceeding.” Pet. 3. Patent Owner contends that “[t]he Board need not construe any term in order to determine that institution should be denied.” Prelim. Resp. 4. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision. See Realtime Data, 912 F.3d at 1375.” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“For these reasons, we are not persuaded that Petitioner sufficiently establishes that a POSITA would have been motivated to modify Hanafusa in light of Dobashi with a reasonable expectation of success as Petitioner contends. Accordingly, we determine that Petitioner fails to demonstrate a reasonable likelihood of prevailing in its assertion that the subject matter of claim 1, and claims 4 and 8 that depend therefrom, would have been obvious over the combined teachings of Hanafusa and Dobashi.” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Petitioner also focuses on Hanafusa’s teaching that all known methods can be used to make a rough surface low-profile, and Dobashi’s teaching that RSm can be used as an indicator for judgment of the surface, to support its contention that a POSITA would have been motivated to apply Dobashi’s RSm to further achieve Hanafusa’s purpose, without explaining how and why that would be the case. In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness and is rough when RSm is small.” Id. at 3:1–3, 6:27–29. Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66– 3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66–3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 11,346,014 - Jiangsu Favored Nanotechnology Co., Ltd. v. P2i Ltd.All claims unpatentablePTAB · Apr 11, 2025 · IPR2024-00380 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1–5, 7, and 9–14 are unpatentable as obvious over Cohen and Legein or Francesch and Legein; Petitioner’s motion to strike is denied as moot.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“The parties agree that a person of ordinary skill in the art in the field of the ’087 patent in June 20154 “would have had at least a bachelor’s degree in a field such as chemistry, physics, or chemical engineering, as well as at least two years of experience with plasma-polymerization techniques.” Pet. 20 (citing Ex. 1002 ¶¶ 22–29); PO Resp. 13 (Patent Owner stating that it “does not dispute this characterization of the level of ordinary skill in the art.”); see also PO Sur-reply 1–2 (noting both parties’ agreement on the education and experience level of the ordinarily skilled artisan).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“On the fully developed trial record, we determine that no claims need an express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Because of Patent Owner’s shifting definitions of the education and experience level of the ordinarily skilled artisan, it is unclear on the complete record what precise definition Patent Owner and Dr. Senkevitch are applying when arguing the skilled artisan’s capabilities. PO Resp. 13, 22–27, 31–32, 34–40; PO Sur-reply 1–6, 11–13; Ex. 2007 ¶¶ 30, 31, 33, 34, 37, 40, 52–55, 60, 68, 74, 76, 77, 80–86, 89, 91, 94, 95, 100, 102–105, 108, 110, 111, 113–116, 118–120, 122, 124, 127–134. We, therefore, give Dr. Senkevitch’s testimony regarding the capabilities of a person of ordinary skill in the art minimal weight, which leaves us with Patent Owner’s insufficiently supported arguments regarding the skilled artisan’s capabilities. PO Resp. 13, 22–27, 31–32, 34–40; PO Sur-reply 1–6, 11–13. Moreover, as Petitioner correctly points out, the ʼ087 patent expressly teaches that the precise conditions for forming a protective polymeric coating “will vary depending upon factors such as, without limitation, the nature of the monomer compound, the crosslinking agent, the substrate, as well as the desired properties of the coating” and that such “conditions can be determined using routine methods.” Ex. 1001 15:1–15:5 (emphasis added); Pet. Reply 17. Where the patent itself leaves to the judgment of an ordinarily skilled artisan the assessment of these factors to ascertain suitable conditions for forming the protective coating, we find persuasive Petitioner’s view that it would have been well within the level of ordinary skill to ascertain such suitable conditions.” slip op. at 20
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“We disagree with Patent Owner. Although the claims of the ʼ087 patent recite obtaining the protective cross-linked polymeric coating “by exposing the device or component to a plasma,” the field of endeavor analysis in an analogous art inquiry does not exclusively turn on the claims at issue, but rather takes account of the entirety of a patent’s disclosure. See In re Bigio, 381 F.3d 1320, 1326 (Fed. Cir. 2004) (explaining that “the PTO must show adequate support for its findings on the scope of the field of endeavor in the application’s written description and claims” (emphasis added)); In re Mettke, 570 F.3d 1356, 1359 (Fed. Cir. 2009) (rejecting an argument that the field of endeavor was limited to a claimed “Internet terminal” when “the specification describes various communication media, including facsimile machines and email, as related to the invention.”). This is significant here because the ʼ087 patent discloses that “[t]he … invention relates to protective coatings” and specifically “relates to protective coatings for electronic or electrical devices and components thereof, and methods of forming such coatings.” Ex. 1001, 1:14–17. Based on this disclosure, we find that the ʼ087 patent’s field of endeavor relates to “protective coatings for electronic or electrical devices and components thereof” broadly, not just those formed on such devices or components via a plasma polymerization process as asserted by Patent Owner. Id. Although Cohen does not explicitly disclose that its crosslinked polymers constitute a “protective coating,” Cohen does disclose that its “copolymerizable mixture can be cast into films” (Ex. 1004, 2:61–62), that the polymerization can “effected in situ,” and that the polymers may be used in “numerous” electrical applications (id. at 5:17–25). Tr. 8:9–10:2, 27:2– 21; see Pet. Reply 5 (explaining how “Cohen described insulating polymers that could be applied as films and be used to protect substrates including cables and electrical coils.” (citing Ex. 1004, 2:60–63, 5:13–25)). These disclosures suggest strongly that Cohen’s crosslinked polymers––if cast into a film or formed in situ on an electrical device or component––would serve as a protective coating on that electrical device or component, even though Cohen does not expressly refer to its crosslinked polymers ipsis verbis as a “protective coating.” Thus, we find that Cohen is within the field of endeavor of the ʼ087 patent.” slip op. at 15
Patent outcomesUS 11,041,087 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,041,087 - Sterlite Technologies Inc. v. Afl Telecommunications, LLC.Institution deniedPTAB · Apr 9, 2025 · IPR2025-00127 · APJ Josiah C Cocks · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–4, 8, or 13 were unpatentable over either proposed obviousness ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“At this preliminary stage, we determine whether the information presented shows a reasonable likelihood that Petitioner would prevail in establishing that at least one of the challenged claims would have been unpatentable over the proposed prior art. We analyze the asserted grounds with the above-noted principles in mind.” slip op. at 10
- Skill levelOther
“B. Level of Ordinary Skill in the Art As noted above, resolving the question of obviousness requires determination of the level of ordinary skill in the art. Graham, 383 U.S. at 17–18. Here, however, as Patent Owner observes (Prelim. Resp. 10), 8 Patent Owner does not present arguments or evidence of secondary considerations in its Preliminary Response. Therefore, secondary considerations do not constitute part of our analysis herein. Petitioner has provided no assessment as to the level of ordinary skill to be considered in evaluating the grounds of obviousness that are advanced by Petitioner. The absence of such assessment calls into question the fundamental adequacy of Petitioner in carrying its burden to show a reasonable likelihood of success of unpatentability of the challenged claims that necessarily must take into account the level of ordinary skill in the art.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“In any event, we do not discern that there is any apparent dispute between the parties as to the meaning of any claim term. In considering the record at hand, we determine that it is unnecessary to make explicit, or further address, any claim term in deciding whether or not to institute trial. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the 9 Throughout their briefings, the parties refer to the limitations designated [1.1] through [1.7] using the term “element,” e.g., “element [1.7]” (see, e.g., Pet. 23; Prelim. Resp. 23). For consistency with the parties’ chosen nomenclature, we do the same in this Decision. controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable
“A POSITA would have been motivated to modify Summers’ fiber optic cable 50 to include Kaji’s intermittently-fixed optical fiber tape 2A to obtain the predictable result of enabling a higher density of optical fibers to be packed in Summers’ fiber optic cable 50, as contemplated by Kaji. *** a POSITA would have had a reasonable expectation of success because such modification would amount to nothing more than a simple substitution of Summers’ four-fiber ribbons 52 with Kaji’s intermittently-fixed optical fiber tape 2A by known methods of cable manufacturing. ***” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,287,591 - Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentablePTAB · Mar 25, 2025 · IPR2023-01384 · APJ Jeffrey W Abraham · IPR · Final written decision
Claims 1–7 are unpatentable as obvious over Yoshida and Saxler; the Board did not reach the alternative grounds.
RulingsFinal written decision- Skill levelOther
“In light of the record before us, we determine that we do not need to reach a specific finding regarding the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“In the Institution Decision, we declined to adopt Petitioner’s proposed construction of the “side surfaces” limitation and determined that it was not necessary to further construe this term because “[t]he parties do not dispute that the language ‘side surfaces extending horizontally’ encompasses a gate material with sloped side surfaces as depicted in Figure 5 of the ’335 patent.” Inst. Dec. 11–16 (citing Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017); Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). We invited the parties to address this limitation further during the course of this trial, but neither party provided additional evidence or argument regarding the “side surfaces” limitation. Inst. Dec. 16; see generally PO Resp.; Reply; Sur-reply. Accordingly, we maintain our determination from the Institution Decision that we do not need to construe the “side surfaces” limitation. Inst. Dec. 15– 16.” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“This evidence, particularly the language in the ’335 patent itself, undermines Patent Owner’s argument that “[t]he process for forming gate ledges using separate masks instead of the self-aligned process disclosed in the ’335 patent cannot produce ledges that are ‘substantially symmetric.’” PO Resp. 39 (emphasis added); see also PO Resp. 42–43 (arguing that a gate structure with ledges having substantially equal widths is “not achievable” without using a single photo-mask process). We have considered the evidence presented by Patent Owner and Dr. Schubert in support of Patent Owner’s arguments. PO Resp. 38–43; Ex. 2005 ¶¶ 49–51. We, however, are unable to discern sufficient evidence supporting a conclusion that using separate masks cannot produce ledges that are substantially symmetric, particularly when the ’335 patent suggests otherwise. See Ex. 1001, 4:60– 63 (referring only to the “possibility of misalignment”). Even if, as Patent Owner and Dr. Schubert contend, misalignment “naturally” occurs when using a two-mask process, that does not foreclose the possibility that the” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“It is well settled that “[a] reference does not teach away . . . if it merely expresses a general preference for an alternative invention but does not ‘criticize, discredit or otherwise discourage’ investigation into the invention claimed.” DePuy Spine, Inc. v. Medtronic Sofamor Danek, Inc., 567 F.3d 1314, 1327 (Fed. Cir. 2009) (quoting In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004)). Furthermore, “teaching that a composition may be optimal or standard does not criticize, discredit, or otherwise discourage” slip op. at 31
Patent outcomesUS 10,312,335 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,312,335 - Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationNo claims unpatentablePTAB · Mar 18, 2025 · IPR2023-01383 · APJ Kimberly Mcgraw · IPR · Final written decision
Claims 1–5 were not shown unpatentable because Petitioner did not sufficiently establish a reason to modify the asserted prior art.
RulingsFinal written decision- Expert testimonyPatent owner expert creditedDecided for patent owner
“We disagree with Petitioner’s argument because it fails to address Dr. Schubert’s academic and other experience with GaN transistors. Dr. Schubert is currently a tenured full professor in the Department of Electrical Computer, and Systems Engineering at Rensselaer Polytechnic Institute and was previously a tenured full professor in the Department of Electrical and Computer Engineering at Boston University. Ex. 2001, 129. Additionally, Dr. Schubert was the director of Boston University’s Semiconductor Devices Research Laboratory. Ex. 2001, 129. Dr. Schubert persuasively explains that his general expertise is in the field of electrical engineering and applied physics, including semiconductors, processing, and devices and his specific expertise is in the field of semiconductor materials (such as GaN), semiconductor devices, semiconductor integrated circuits, ohmic contacts, Schottky contacts, HEMTs, and optoelectronic devices such as light-emitting diodes (LEDs). Ex. 2001 ¶ 11, App’x A pp.129–137. His experience includes “the design, growth, fabrication, and testing of semiconductor devices as well as the employment of these devices in a variety of applications” and he is “familiar with both the design of such transistors [HEMTs] and the manufacturing processes used for FETs. Ex. 2001 ¶ 11, App’x A, pp. 129–137. He is an author or co-author of numerous text books and articles, and co-inventor of numerous patents, including those dealing with HEMT transistors and GaN devices. Ex. 2001 ¶ 13, App’x A, pp. 129–137. Petitioner fails to present any persuasive argument or evidence that Dr. Schubert’s extensive education and experience regarding GaN transistors is insufficient or lacking such that his testimony should be given little weight. Finally, we disagree with Petitioner’s additional argument that that its expert’s testimony (Dr. Shealy) should be given more weight than Patent Owner’s expert’s testimony (Dr. Schubert) because “[u]nlike Dr. Schubert, Dr. Shealy is one of the pioneer scientists in the field of GaN transistors.” Reply 34 (stating that Dr. Shealy’s research lab built the first GaN HEMT device on silicon in 1999 and citing Ex. 2002, 87:19–238). Obviousness is determined through the lens of a “person of ordinary skill in the art,” not through the lens of a person with extraordinary skill or a pioneer in the field. Given Dr. Schubert’s extensive relevant education and experience, Petitioner does not persuasively explain why Dr. Shealy’s testimony on any specific topic, or his testimony in general, should be given more weight than Dr. Schubert’s.” slip op. at 16
- Skill levelSkill level petitioner adoptedDecided for petitioner
“understanding of a person of ordinary skill in the art (sometimes abbreviated herein as “POSITA”). Graham, , 383 U.S. at 17–18. Petitioner argued that a person of ordinary skill in the art would have had a “at least a four-year degree in electrical engineering, chemical engineering, physics, or material science or a closely related field and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies. Additional education could substitute for professional experience and vice versa.” Pet. 11 (citing Ex 1003 ¶ 69). Patent Owner did not dispute this proposed definition prior to institution. See generally Prelim. Resp. In our Decision on Institution, we adopted Petitioner’s proposal. After institution, Patent Owner asserted a slightly different definition of a POSITA, namely someone who “would have possessed at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” Resp. 17. Relevant graduate education could substitute for the professional work experience. Id. Upon review of the full record, we see no reason to modify, and we thus maintain, the definition of a POSITA applied in our Decision on Institution. We also determine that our decision would be the same under either of the parties’ proposed definitions.” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Not reached
“During the proceeding, the parties also dispute the proper construction of “etching away the doped GaN layer, except a portion of the doped GaN layer beneath the gate contact” as recited in step [1e4] and provided briefing on this issue. Papers 35, 36, 37, 38. Because, as explained below, our determination rests upon Petitioner’s failure to show a sufficient reason to modify the asserted art, which is not dependent upon any particular claim construction, we need not, and do not, address these claim construction issues. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy).” slip op. at 13
- ExcludeDenied
“III. PETITIONER’S MOTION TO EXCLUDE EXHIBIT 2008 Petitioner filed a Motion to Exclude (Paper 25, “Mot.”) Exhibit 2008, which is a hearing transcript from the parallel ITC investigation. Mot. 1. Because we do not rely upon Exhibit 2008 in our Decision, we dismiss Petitioner’s motion as moot.” slip op. at 47
Patent outcomesUS 8,404,508 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,404,508 - Innoscience (Zhuhai) Technology Company, Ltd / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentablePTAB · Mar 18, 2025 · IPR2023-01381 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–3 and 7–9 are unpatentable as obvious over Uemoto and Smith; the motion to amend is granted, and proposed substitute claims 13 and 14 are not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In order to determine whether an invention would have been obvious at the time the application was filed, we consider the level of ordinary skill in the pertinent art. Graham, 383 U.S. at 17. In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quotation omitted). Petitioner contends a person of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering, chemical engineering, physics, or material science, or a closely related field, and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies.” Pet. 5–6. Petitioner contends “[a]dditional education could substitute for professional experience and vice versa.” Id. at 6. Patent Owner contends that a person of ordinary skill in the art would have had “at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” PO Resp. 7 (citing Ex. 2009 ¶ 82). Upon review of the evidence of record and the parties’ arguments, we adopt Petitioner’s definition of the person of ordinary skill in the art as it is consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art). We note, however, that the conclusions reached in this Decision would be the same under either proposed definition of the ordinarily skilled artisan. See Ex. 2009 ¶ 83 (Dr. Schubert testifying that his opinions would be the same under either proposed definition); Ex. 1033 ¶ 9 (Dr. Shealy testifying that the differences in proposed definitions of the ordinarily skilled artisan “would not change the outcome of the invalidity analysis in any material manner”); PO Resp. 7; Pet. Reply 1.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“compensated GaN layer above the barrier layer, and a gate contact above the compensated GaN layer.” Ex. 1001, 5:12–18. Petitioner contends the term “compensated” indicates that the step of compensating the GaN layer has already occurred, such that the term “compensated GaN layer” should be construed as a “‘[d]oped GaN layer formed with a step to passivate its impurities’ which is a ‘product-by-process’ limitation.”5 Pet. 12–14. And, because compensation with hydrogen was the “critical step” distinguishing the claims from the prior art, and because hydrogenation in as-grown III-nitride materials had been well known for over a decade by 2009, Petitioner contends “compensated” “cannot be interpreted as mere hydrogen presence in as-grown material, a well-known property of doped GaN.” Id. at 15. Patent Owner contends “compensated GaN material” should be construed as “a semiconductor GaN gate material in which one type of impurity (for example, donor) cancels the electrical effects of the other type of impurity (for example, acceptor).” PO Resp. 11 (citing Ex. 2009 ¶ 92) (emphasis added). Patent Owner contends this construction is consistent with the IEEE dictionary, which defines “compensated semiconductor” as 5 Given that product-by-process steps in a device claim are not entitled to patentable weight, Petitioner contends “the prior art only need show a material with passivated impurities to show unpatentability, not the step to achieve it.” Pet. 15–16. “[a] semiconductor in which one type of impurity or imperfection (for example, donor) partially cancels the electric effects of the other type of impurity or imperfection (for example, acceptor).” PO Resp. 14 (quoting Ex. 2004). Patent Owner contends its construction is also consistent with the written description of the ’294 patent, which explains that a compensated GaN material is part of the gate and includes a p-type impurity that imparts an electrical effect (i.e., conductivity), as well as a second impurity, e.g., hydrogen, that partially cancels the electrical effect of the p-type impurity, rendering the layer semi-insulating. Id. at 14–15 (citing Ex. 1001, 3:10–13, 3:43–45). On this record, we construe “compensated GaN layer” as “a GaN layer in which one type of impurity (for example, donor) partially cancels the electric effects of the other type of impurity (for example, acceptor).” This is consistent with the disclosures of the ’294 patent, the IEEE dictionary definition, and the construction ultimately adopted by the ITC. Ex. 2004, 3; Ex. 1049, 16–17 (ITC construing “compensated GaN layer” to mean “a GaN layer in which one type of impurity partially cancels the electrical effects of another type of impurity”); Ex. 1001, 3:43–45 (explaining that the compensated GaN layer of the ’294 patent is formed through the “passivation of a p-type impurity using hydrogen”). For the reasons set forth below, however, we decline to construe “compensated GaN layer” as a product-by-process claim term (as asserted by Petitioner), or to limit the compensated GaN layer to a gate material (as asserted by Patent Owner).” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“There are two exceptions to the general rule that we apply the ordinary and customary meaning of a claim term: (1) when a patentee sets out a definition and acts as his own lexicographer, or (2) when the patentee disavows the full scope of a claim term either in the specification or during prosecution. See Thorner, 669 F.3d at 1365. The standards for lexicography and disclaimer, however, are “exacting.” Id. at 1366. There is no argument that the patentees acted as their own lexicographer to redefine the term “compensated GaN layer.” With respect to disavowal, a “patentee may demonstrate intent to deviate from the ordinary and accustomed meaning of a claim term by including in the specification expressions of manifest exclusion or restriction, representing a clear disavowal of claim scope.” Thorner, 669 F.3d at 1366 (quoting Teleflex, Inc. v. Ficosa N. Am. Corp., 299 F.3d 1313, 1325 (Fed. Cir. 2002)). As noted by Patent Owner, the title of the ’294 patent is, in part, “Compensated Gate MISFET” and much of the discussion of the ’294 patent is of a compensated GaN layer that is directly below the gate contact and above a barrier layer and operates in conjunction with the gate contact to control the on/off state of the transistor. PO Resp. 12–14. We are presented with insufficient argument or evidence to conclude, however, that these disclosures rise to the level of a disclaimer. For example, although the title of the ’294 patent is directed to a “Compensated Gate MISFET,” claim 1 is more broadly directed to “[a] column III Nitride transistor.” Ex. 1001, 5:12, code (54). Nor are we directed to an expression or statement of manifest exclusion in the ’294 patent that would serve to disclaim any “compensated GaN layer” that is not directly below the gate and/or that does not function in concert with the gate electrode to control the on/off state of the transistor. See Thorner, 669 F.3d at 1366. With respect to the stated goals of the invention, as noted by Patent Owner, one of the primary purposes of the compensated GaN layer of the ’294 patent is to reduce gate leakage and gate capacitance. Ex. 1001, 2:13– 19, 3:18–21 (“[U]sing a compensated semiconductor layer 38 leads to low gate leakage during device operation.”). We cannot use the goals of the invention, however, to rewrite the claims or insert terms that are not present. See Thorner, 669 F.3d at 1366. Moreover, the prior art of record indicates that a compensated GaN layer that is below the gate contact and above a barrier layer, but not part of the active gate structure, may also “decrease the leakage current between the gate and the drain.” Ex. 1006 ¶¶ 44 (“Even when a positive bias of 5 V or higher is applied to the gate electrode, no significant gate-leakage current is observed.”), 61. As such, evidence of record suggests that a person of ordinary skill in the art would have understood that one of the primary goals disclosed in the ’294 patent is achieved regardless of whether the compensated GaN layer is part of the gate, or simply in close vicinity to the gate. In view of the foregoing, we are not persuaded that the written description of the ’294 patent indicates that the “compensated GaN layer” must be part of the gate structure.” slip op. at 17
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“To be probative, Patent Owner must prove there is a nexus between the presented evidence and the merits of the claimed invention. See Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988). A rebuttable presumption of nexus applies when the “patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco, 851 F.2d at 1392). “That is, presuming nexus is appropriate ‘when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.’” Id. (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). If the praise is not limited to the features of the claimed invention, the patent owner may still prove nexus “by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. at 1373–74 (quoting In re Huang, 100 F.3d 135, 140 (Fed. Cir. 1996)). Patent Owner contends that the compensated gate of the ’294 patent “was a breakthrough invention and resulted in the first commercially viable enhancement-mode GaN transistor.” PO Resp. 60 (citing Ex. 2009 ¶¶ 192– 193, 197; Ex. 2021). Patent Owner further contends that this achievement required the counter-intuitive use of a compensated gate material in the gate structure, and represented “a technological leap that laid the foundation for viable enhancement-mode GaN transistors.” Id. at 61–62. For this achievement, Patent Owner contends the inventor, Dr. Alex Lidow, received the 2015 SEMI Award. Id. at 60 (citing Ex. 2021). Upon review of Patent Owner’s evidence and the parties’ arguments, we find that Patent Owner’s objective indicia evidence is entitled to little, if any, weight. The evidence of praise relied upon by Patent Owner is not clearly linked to the claimed invention or any particular product having each of the claimed features of the ’294 patent. Ex. 2021. For example, the 2015 SEMI award was provided to Dr. Lidow “for commercialization of GaN power devices.” Id. An article explaining the award indicates that “high cost” previously “limited [the] commercial success” of GaN technologies, but Dr. Lidow was able to overcome these issues, “from resolving packaging limitations to establishing a low-cost supply chain,” “through persistence.” Id. This praise is not demonstrably linked to the claimed invention or any particular device, and does not mention the use of a compensated gate, or any other relevant feature recited in the claims. In view of the foregoing, we determine that Patent Owner’s objective evidence of non-obviousness is entitled to little, if any, weight.” slip op. at 20
Patent outcomesUS 8,350,294 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 8,350,294 - PTAB · Mar 12, 2025 · IPR2024-01458 · APJ Julia Heaney · IPR · Institution
The Board instituted IPR of claims 1, 7, 8, and 11 on all asserted grounds, finding a reasonable likelihood of unpatentability on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Upon consideration of the Petition in view of the record at this stage, we determine that Petitioner has established a reasonable likelihood that it would prevail in showing the unpatentability of at least one claim challenged in the Petition. Accordingly, we grant institution of an inter partes review of all claims and all grounds asserted in the Petition.1” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Patent Owner’s construction of the claims as informed by its allegations of infringement in co-pending litigation, as best Petitioner is able to understand such allegations.” Pet. 18 (citing Exs. 1016–1017). Petitioner does not propose construction of any claim term at this stage of the proceeding. Upon review of the record, we determine that no claim terms require express construction for purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 7
- Skill levelSkill level petitioner adoptedDecided for petitioner
“would possess at least a Bachelor’s degree in mechanical engineering, electrical engineering, industrial design or product design or product design engineering, chemistry, or physics, or a related field, and at least three to four years of industry experience, or a Master’s degree in mechanical engineering, electrical engineering, industrial design or product design or product design engineering, chemistry, or physics, or a related field, and at least one to two years of industry experience. Pet. 15 (citing Ex. 1003 ¶ 18). Petitioner further argues a “POSA would have been familiar with electrically powered cigarettes and their components and underlying technologies or similar components and technologies.” Id. For purposes of this decision, we adopt Petitioner’s definition of the level of ordinary skill in the art because it is consistent with the ’788 patent and the asserted prior art.” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“second chamber. Pet 55 (citing Ex. 1005 ¶ 20, Fig. 1a). Petitioner concedes Lee does not disclose a bulb containing a heating wire, but contends this would have been obvious at least in view of Gilbert. Id. at 56 (referring to Pet. 41–42, citing Ex. 1004, 2:45–46, 2:50, 2:71–3:2, Fig. 2). Petitioner contends a person of ordinary skill in the art would have been motivated to explore other types of heating elements than the nichrome wire described in Lee due to issues with e-cigarettes at the time, such as metallic taste or inhalation risks associated with the use of a metal wire heating element. Id. at 57 (citing Ex. 1003 ¶ 117). Petitioner contends it was known to use bulb heaters for vaporizing fluids for almost 100 years (id. ¶¶ 117–118), and therefore a person of ordinary skill would have been motivated to implement a heating element within a glass bulb in Lee’s device to address the metal taste and inhalation risk issues. Pet. 57. Petitioner further contends a person of ordinary skill in the art would have been motivated to implement a heating element within a glass bulb to increase the life of the heating element and prevent failure of the device, because Levin teaches that directly contacting the heating element was known to reduce the life of the heating element, and discloses a heater bulb for vaporizing an active ingredient for inhalation by the user. Id. at 58–59 (citing Ex. 1009 ¶¶ 4, 49, 56). In view of the foregoing, we determine Petitioner has demonstrated sufficiently for purposes of institution that the combination of Lee, Gilbert, and Levin teaches or suggests limitation [1d], and that a person of ordinary skill in the art would have had reason to use Gilbert’s or Levin’s bulb heater in Lee’s electronic cigarette, with a reasonable expectation of success.” slip op. at 14
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,538,788
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.