- PTAB · Sep 19, 2025 · PGR2025-00025 · APJ Kimberly Mcgraw · PGR · Institution
The Board instituted PGR on claims 1–19 and all asserted grounds, finding it more likely than not that claim 1 is anticipated by the Gatorade Label.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Post-grant review is available for patents that issue from applications that at one point contained at least one claim with an effective filing date on or after March 16, 2013. See Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), §§ 3(n)(1), 6(f)(2)(A). After considering the briefing and the evidence of record, for the reasons set forth below, we determine that Petitioner has shown that the ’422 Patent is eligible for post-grant review and has shown it is more likely than not that at least one challenged claim of the ’422 Patent is unpatentable under § 324(a). Accordingly, we institute a post-grant review of the challenged claims of the ’422 Patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would possess at least (1) a Bachelor’s degree in chemistry or a related field, with (2) five years of experience in material identification and characterization using multiple analytical methods and field sampling, or equivalent research or professional experience.” Pet. 12 (citing Ex. 1014 ¶ 24). Patent Owner does not dispute Petitioner’s definition for one of ordinary skill in the art nor provide a proposed definition of its own. See generally Prelim. Resp. For the purposes of this Decision, we adopt Petitioner’s undisputed proposal regarding the level of one of ordinary skill in the art.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer foundDecided for patent owner
“336. The applicant explained that not all combinations of shrink films and light blocking materials are recyclable. Id. at 335. The applicant explained that films can be compatible with PET recycling in two ways, (1) the film can float in water and be separated from PET that sinks in water or (2) the PET films crystallize and “can be recovered with the PET stream.” Id. at 336 (citing “A Resource Document by the Association of Plastic Recyclers (APR)”) (found at Ex. 1002, 323–332) (emphasis omitted). The applicant explained that “removing the label before or during the recycling process is not evidence of the recyclability of the label” and that “[r]emoving the label during the recycling process is not equivalent to actually recycling the label.” Id. at 335. As such, a POSITA reading the prosecution history would understand that a label is not recyclable with a PET container, as recited by the independent claims, by removing the label from the PET recycle stream before or during the recycling process.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“To determine how a person skill in the art would determine if a shrink label is “recyclable” as recited in the independent claims, we look to how the Specification of the ’422 Patent describes or defines recyclable shrink labels. For example, the ’422 Patent states that PET shrink films are generally considered recyclable if no inks are retained on the film after a caustic wash cycle typically used in PET reclaiming processes. Ex. 1001, 6:61–65. The ’422 Patent further states that labels are fully recyclable if the polymers used are clear, preferably clear PET, and the labels include inks that can be washed off in a “typical PET recycling wash (caustic wash).” Id. at 11:44– 49; see also id. at 11:49–54 (describing embodiments in which the labels are free or substantially free of inks that cannot be washed off in a caustic wash or where the labels are free or substantially free of color plastics that cannot be recycled). The ’422 Patent further discusses “industry standards” for determining whether various embodiments of shrink labels are recyclable. See, e.g., id. at 11:29–53. For example, the Specification states that the “Association for Plastic Recyclers (APR) Critical Guidance Protocol for Clear PET Articles with Labels and Closures (PET-CG-02)” (Ex. 1005) can certify that a film is fully recyclable with a container or bottle. Id. at 11:34– 38. Additionally, the Specification states that labels “are recyclable according to the Evaluation of the Near Infrared (NIR) Sorting Potential of a Whole Plastic Article (SORT-B-01)” (Ex. 1010) and/or the “Evaluation of Sorting Potential for Plastic Articles Utilizing Metal, Metalized, or Metallic Printed Components (SORT-B-03)” (Ex. 1011). Ex. 1001, 11:39–44. The ’422 Patent further states that embodiments of the labels “are fully recyclable. For example, the labels may include inks that can be washed off in a typical PET recycling wash (caustic wash) and the polymers” are preferably clear PET. Id. at 11:44–48. The ’422 Patent thus provides various descriptions or standards to determine the recyclability of shrink labels. For the purposes of addressing the anticipation and obviousness grounds, we determine that any of these standards can be used to determine if a shrink label is “recyclable.” We note that our construction is preliminary and is based on the present record. We invite the parties to further the address the construction of “wherein the recyclable shrink label is recyclable with a PET container” during trial.” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · NautilusPatents in suitUS 11,961,422 - Champion Laboratories, Inc. / First Brands Group, LLC v. Hengst SENo claims unpatentablePTAB · Sep 8, 2025 · IPR2024-00603 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1, 3, 5, 8–11, 15–17, 19, 23–25, and 28–30 were not shown unpatentable over Yokoyama, Yokoyama and Cline, or Honermann and Cline.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Because the level of ordinary skill in the art is not in dispute, and because the parties’ definition is consistent with the disclosures in the ʼ203 patent, the prior art, and the declaration testimony of Mr. Nranian and Dr. Basirat, we view the prior art and arguments through this lens when determining whether the claims are unpatentable as obvious over the prior art.5 See Graham, 383 U.S. at 17 (identifying “the level of ordinary skill in the pertinent art” as an underlying factual inquiry to be resolved in deciding obviousness, which is a question of law).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Although the parties spend significant portions of their briefing discussing the term “eccentric” and how it applies to certain figures from the ʼ203 patent and the relied-upon prior art, we determine that it is not necessary to expressly construe the term “eccentric” beyond the parties’ agreed-upon definition. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Expert testimonyPetitioner expert discountedDecided for patent owner
“(opining that “Patent Owner’s construction of ‘having an axis no located in a geometric center’ is too narrow”). Mr. Nranian’s Declaration testimony in this respect is not persuasive for several reasons. First, it is internally inconsistent. Compare Ex. 1016 ¶ 3 (criticizing the “axis” language in Patent Owner’s definition), with id. ¶¶ 9, 11 (relying on that very language to support an argument). Also, Mr. Nranian’s proposed definition of “eccentric” to merely mean “not located at the center” begs the question of what, precisely, is “the center”? Mr. Nranian does not persuasively explain how far a person of ordinary skill in the art would understand she could travel from the exact center point of an object and still be in “the center” of that object. See Tr. 10:13–19 (Judge McGee asking whether the center is “a miniscule point in the middle of [the] disc”); see also id. at 10:25–12:26 (Judge Weatherly highlighting the significant ambiguity in referring to something as in “the center”). Also, Mr. Nranian’s opinion is inconsistent with how the ʼ203 patent compares something that is “central,” i.e., “at the center,” and something that is “eccentrically” located. Ex. 1001, 7:13–14 (describing pipe nozzle 15 as “central”); id. at 8:53–56 (describing a “through hole” as “located in the center of the front panel 22” depicted in Figures 7 and 8); id. at 10:23–31 (describing return 12 as “in the center” and outlet 13 as “eccentrically thereto” in Figure 17). Patent Owner’s colorized and annotated Figure 7 is reproduced below: Patent Owner’s colorized and annotated version of Figure 7 of the ʼ203 patent illustrates “central pipe nozzle 15” in yellow passing through the “through hole” located in “the center” of front panel 22. PO Resp. 20. Significantly, pipe nozzle 15 and the through hole in panel 22 are both described as “central” and in “the center” but must have different diameters; otherwise, “central pipe nozzle 15” would not be capable of traveling through “through hole 22.” Ex. 1001, Fig. 7. Thus, the ʼ203 patent intrinsically bases whether an element is “central” or “in the center” on whether its axis is located at the geometric center. This is also illustrated in Figure 17 of the ʼ203 patent, reproduced below: Figure 17 of the ʼ203 patent illustrates filter housing 10 with return 12 “in the center . . . and, eccentrically thereto, the outlet 13 with the seat 14 for the blocking element 24.” Ex. 1001, 10:23–30. Finally, Mr. Nranian’s narrow interpretation of “eccentric”––which excludes the “having the axis or support so located” in the geometric center language––is at odds with the arguments it was proffered to support. Cf. Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”).” slip op. at 29
Patent outcomesUS 9,023,203 not shown unpatentableClaim construction§ 103 obviousnesscites GrahamPatents in suitUS 9,023,203 - Shenzhen Xinzexing E-Commerce Co., Ltd. v. Shenzhen Carku Technology Co., Ltd.All claims unpatentablePTAB · Jul 24, 2025 · IPR2024-00222 · APJ Garth D Baer · IPR · Final written decision
Claims 1–3, 6–23, and 25–33 are unpatentable, including as anticipated by Chen and as obvious over the Chen and Inskeep combinations.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“have at least a Bachelor’s Degree in Electrical Engineering and at least two years of experience in the field of electrical engineering and specifically power supply management such as battery charging system design.” PO Resp. 31. Petitioner presents a similar formulation. Pet. 10. Although we do not discern any meaningful distinction between the parties’ formulations, we adopt Patent Owner’s description of a person of ordinary skill as it is consistent with the prior art and challenged patent’s specification. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself may reflect an appropriate level of skill).” slip op. at 5
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“a first current through one or more output ports of the at least one output port in a first operating mode,” and “is configured to output a second current capable of starting a vehicle engine through the pair of output terminals in a second operating mode.” Ex. 1001, 8:25–34. Claim 21 has similar first and second operating-mode limitations. Id. at 9:40–46. Patent Owner proposes that “[t]he proper construction for ‘first operating mode’ is ‘an operating mode of the portable backup charger wherein the battery pack is configured to output a first current through one or more output ports of the at least one output port, and outputting a second current capable of starting a vehicle engine through the pair of output terminals is inhibited.’” PO Resp. 25. Similarly, Patent Owner argues “[t]he proper construction for ‘second operating mode’ is ‘an operating mode of the portable backup charger wherein the battery pack is configured to output a second current capable of starting a vehicle engine through the pair of output terminals, and outputting a first current through one or more output ports of the at least one output port is inhibited.’” Id. at 27. Patent Owner asserts that claim differentiation supports its construction because dependent claim 3 recites “a third operating mode for outputting the first current and the second current simultaneously,” and “if the battery pack could output the first current and the second current simultaneously in the first operating mode, then there would be no difference between the claimed first operating mode and the claimed third operating mode.” Id. at 26. We disagree with Patent Owner’s constructions because, as Petitioner explains, they wrongly import current-inhibiting limitations beyond the plain language in the claim. Pet. Reply 1. Nothing in the at-issue language addresses inhibiting current. In addition, the claimed first and third operating modes are still distinct without importing additional limitations because outputting just the first current is sufficient for the first operating mode, but not for the third. In other words, whereas the third operating mode requires simultaneity, the first and second merely permit it. Thus, claim differentiation does not support Patent Owner’s construction. Last, although Patent Owner asserts that its construction “is consistent with the specification,” nothing in the cited passages describes inhibiting current. Prelim. Resp. 26 (citing Ex. 1001, 4:30–33, 5:30–33, 5:58–62). Instead, the specification characterizes the modes solely by what the portable charger “can output,” not what is inhibited. Ex. 1001, 4:30–33, 5:30–33, 5:58–62. Thus, we decline to read the first and second operating modes to require the current-inhibiting features that Patent Owner asserts.” slip op. at 6
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“Patent Owner argues the two current paths are not different because Chen’s Figure 1 shows they overlap between the lithium battery and the output control circuit and “only diverge when making the connection to the output control circuit.” PO Resp. 32. We disagree. First, Patent Owner’s argument is based on a claim construction for “different” current paths that we do not adopt for the reasons above. In addition, we agree with Petitioner that Chen shows the claimed different current paths even under Patent Owner’s construction. Pet. Reply 8–12. Specifically, as Petitioner explains, a skilled artisan would recognize that Chen’s physical circuits are depicted in Figures 4–7, rather than in Chen’s Figure 1, which is merely a “block diagram of the principle of present invention.” Id. at 9; Ex. 1006 ¶ 15. Unlike Figure 1, Chen’s Figures 5, 6, and 7 show current paths between the battery and USB outputs, and between the battery and DC multi-gear output, that do not overlap with the high current path shown in Chen’s Figure 4. Pet. 9–12. Based on Petitioner’s analysis and for the reasons above, we agree with Petitioner that Chen teaches the claimed “pair of output terminals coupled to the battery pack and having a current path to the battery pack different from that of the at least one output port to the battery pack.”” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“Patent Owner asserts one skilled in the art would not have added White’s fuse to Chen because doing so was “unnecessary” given Chen’s built-in relay K1 that already provides protection. PO Resp. 42–43. We disagree because, as Petitioner notes, “the Petition cited ample evidence that both layers of over current prevention provide improved safety and protection to the battery.” Pet. Reply 17 (citing Pet. 31–33); see also, e.g., Pet. 31 (describing “advantageously reduc[ing] the likelihood of damage”), id. at 32 (describing “the additional benefit of a safety fuse along a jumper cable to promptly cut off current in the event of a short circuit” and “more simplified maintenance and repair”). Given Petitioner’s unrebutted rationale, Petitioner has articulated sufficient reasoning with rational underpinning to support the legal conclusion that adding White’s fuse and polarity-protection connector to Chen’s power-supply system would have been obvious to one of ordinary skill in the art. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007). Other than the arguments addressed above, Patent Owner does not additionally challenge Petitioner’s obviousness showing based on Chen and White. We have reviewed Petitioner’s arguments and evidence and, based on that analysis, we find Petitioner has shown by a preponderance of the evidence that claims 1, 2, 6–9, 11–14, 16–22, 25–28, and 30–33 would have been obvious over Chen and White.” slip op. at 15
Patent outcomesUS 9,643,506 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSRPatents in suitUS 9,643,506 - Posco Co., Ltd. v. ArcelormittalInstitutedPTAB · Jul 23, 2025 · IPR2025-00371 · APJ Brian D Range · IPR · Institution
The Board instituted IPR on claims 1–25 based on all petitioned grounds, finding a reasonable likelihood that POSCO would prevail.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The following findings of fact and conclusions of law are not final, but are made for the sole purpose of determining whether Petitioner meets the threshold for initiating review. Any final decision shall be based on the full trial record, including any response timely filed by Patent Owner. Any arguments not raised by Patent Owner in a timely-filed response may be deemed waived. For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We hereby institute an inter partes review as to claims 1–25 of the ’227 patent based upon Petitioner’s asserted grounds of unpatentability.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’227 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner does not propose any claim constructions. Pet. 3. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“35 U.S.C. § 103(a) as obvious over Takagi and Cornette, citing the Declaration of Dr. Miles for support. Pet. 1, 6–49 (citing Ex. 1003) (Petitioner’s Ground 1A). a. Claim 1 Petitioner argues that Takagi and Cornette teach or suggest each recitation of claim 1. Pet. 6–31. Petitioner argues, for example, that the preamble of claim 1 is not limiting or, alternatively, imparts no structural distinction from Takagi. Id. at 20–23 (citing, e.g., Ex. 1003 ¶ 48). Petitioner further argues that Takagi and Cornette teach forming or hot stamping to arrive at their products. Id. at 23 (citing, e.g., Ex. 1016 ¶ 36 (Takagi referring to “form[ing]” its products shape); Ex. 1014, 9–11 (Cornette referring to “hot stamping”); Ex. 1003 ¶ 48. Petitioner argues that Takagi teaches a strip of base steel having a first and second side. Id. at 23–24 (citing, e.g., Ex. 1003 ¶ 49; Ex. 1016 ¶¶ 13, 36. Petitioner argues that Takagi teaches a coating that is a “diffusion layer” having five phases as depicted by Takagi Figure 2A and explained by Takagi Table 1 (Takagi Fig. 4). Id. at 24–30 (citing, e.g., Ex. 1003 ¶¶ 50–59; Ex. 1016 ¶ 20, Fig. 2A). Petitioner argues that Takagi alone or as modified by Cornette teaches a coating thickness greater than than 30 µm. Id. at 30–31; Ex. 1014, 9; Ex. 1016 ¶ 35; Ex. 1003 ¶¶ 60–61. Petitioner explains why a person having ordinary skill in the art would have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 31–47; Ex. 1016 ¶¶ 19–37, 47; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13; Ex. 1055 ¶¶ 2, 7, 14–15, 18, Fig. 3). Based on our review and consideration of the current record, we determine that the information presented sufficiently supports, for purposes of institution, Petitioner’s assertions that Takagi and Cornette teach or suggest each limitation of claim 1. See Pet. 6–31. We therefore determine Petitioner has met its burden to show a reasonable likelihood it would prevail in demonstrating that claim 1 would have been obvious over Takagi and Cornette.” slip op. at 12
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,326,227 - Posco Co., Ltd. v. ArcelormittalInstitutedPTAB · Jul 23, 2025 · IPR2025-00370 · APJ Brian D Range · IPR · Institution
The Board instituted IPR of claims 1–30 on all twelve asserted obviousness grounds, finding a reasonable likelihood that POSCO would prevail.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The following findings of fact and conclusions of law are not final, but are made for the sole purpose of determining whether Petitioner meets the threshold for initiating review. Any final decision shall be based on the full trial record, including any response timely filed by Patent Owner. Any arguments not raised by Patent Owner in a timely-filed response may be deemed waived. For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We hereby institute an inter partes review as to claims 1–30 of the ’602 patent based upon Petitioner’s asserted grounds of unpatentability.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’602 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner does not propose any claim constructions. Pet. 3. We do not discern a need to construe any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200” slip op. at 9
- BurdenInstituted
“determine that the information presented sufficiently supports, for purposes of institution, Petitioner’s assertions that Takagi and Cornette teach or suggest each limitation of claim 1. See Pet. 6–33. We therefore determine Petitioner has met its burden to show a reasonable likelihood it would prevail in demonstrating that claim 1 is obvious over Takagi and Cornette.” slip op. at 12
Claim constructioncites KSR · GrahamPatents in suitUS 10,961,602 - PTAB · May 16, 2025 · IPR2024-01487 · APJ Julia Heaney · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood that claim 1 would have been obvious over Nakazawa and Glaug.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Upon consideration of the Petition in view of the record at this stage, we determine that Petitioner has established a reasonable likelihood that it would prevail in showing the unpatentability of at least one claim challenged in the Petition. We also determine that the arguments and evidence of record do not support discretionary denial of the Petition under 35 U.S.C. § 314(a). Accordingly, we grant institution of an inter partes review of all claims and all grounds asserted in the Petition.1” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“person of ordinary skill would modify either Nakazawa’s diffusion sheet or Glaug’s fluid acquisition system, but rather Petitioner argues “various layers in absorbent articles are invariably interchangeable.” Prelim. Resp. 41–42. Contrary to Patent Owner’s argument, as discussed above, Petitioner explains why and how a person of ordinary skill would modify Nakazawa’s diffusion sheet, and provides reasons for doing so. On this record, we find Petitioner’s reasoning sufficient.” slip op. at 24
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“Patent Owner further argues Nakazawa teaches away from Petitioner’s asserted modification in which Glaug’s lower non-perforated layer is added to Nakazawa’s diffusion sheet. Prelim. Resp. 42. Specifically, Patent Owner argues Nakazawa teaches that its embodiment in which the second absorbent material is wrapped in a hydrophilic sheet has the advantage of preventing leakage of super absorbent polymer (“SAP”) from the second absorbent material without impeding permeation of excretory fluid through the hydrophilic sheet. Id. at 43 (citing Ex. 1008 ¶ 85, Fig. 15). Patent Owner further relies on Petitioner’s argument that Nakazawa’s hydrophilic layer is analogous to the lower non-perforated layer in Glaug. Id. (citing Pet. 93–94). Therefore, Patent Owner argues, Nakazawa teaches that Glaug’s fluid acquisition system would impede permeation of fluid rather than promote it. Id. Patent Owner’s teaching away argument is unavailing based on the current record. Patent Owner improperly relies on Petitioner’s contention in its anticipation challenge based on Nakazawa, and characterizes it as an argument about Glaug. As further discussed in Section II.G below, Petitioner’s anticipation challenge is based on analogizing Nakazawa’s hydrophilic sheet to a core wrap feature identified in Patent Owner’s infringement contention in parallel district court litigation. See Pet. 92–93. Contrary to Patent Owner’s argument, Petitioner’s obviousness contention does not argue Nakazawa’s hydrophilic layer is analogous to Glaug’s nonperforated fibrous layer. Because Patent Owner is not properly characterizing Petitioner’s obviousness contention, Patent Owner’s teaching away argument is not persuasive.” slip op. at 24
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“Under Fintiv, we consider the following factors: 1. whether the court granted a stay or evidence exists that one may be granted if a proceeding is instituted; 2. proximity of the court’s trial date to the Board’s projected statutory deadline for a final written decision; 3. investment in the parallel proceeding by the court and the parties; 4. overlap between issues raised in the petition and in the parallel proceeding; 5. whether the petitioner and the defendant in the parallel proceeding are the same party; and 6. other circumstances that impact the Board’s exercise of discretion, including the merits. Fintiv at 5–6.” slip op. at 35
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 9,308,138 - PTAB · Apr 25, 2025 · IPR2024-01463 · APJ David Cotta · IPR · Institution
The Board instituted inter partes review of claims 1–10 on all asserted grounds, finding a reasonable likelihood of success on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“predict how the district court in the related district court litigation will proceed because the court may determine whether or not to stay any individual case . . . based on a variety of circumstances and facts beyond our control and to which the Board is not privy.” Sand Revolution II LLC v. Cont’l Intermodal Grp., IPR2019-01393, Paper 24, 7 (PTAB June 16, 2020) (informative). We decline to speculate on how the court may rule on the pending motion to stay. Accordingly, this factor is neutral.” slip op. at 13
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), inter partes review may not be instituted unless the Petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Petitioner has established a reasonable likelihood of prevailing on its assertion that at least one of the challenged claims is unpatentable based on the grounds advanced here. We decline to deny the Petition on a discretionary basis as requested by Patent Owner. Thus, for reasons explained below, we institute inter partes review of claims 1–10 of the ’706 patent.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“TC(220), and ΔRz/Ra are result effective variables and that copper foils having ΔPD, TC(220), and ΔRz/Ra values that meet the values recited in claim 1 have advantageous properties. See, e.g., Ex. 1005 ¶ 45 (Kim ’761, disclosing that preferably the “difference in peak count roughness Rpc between the shiny surface . . . and the matte surface . . . of the electrolytic copper foil . . . is preferably 60 or less” because “when the difference in the peak count roughness Rpc exceeds 60 capacity maintenance of the secondary battery is deteriorated.”);15 Ex. 1007, 3:16–23, 4:14–23 (Cheng, disclosing that the foils of Cheng’s invention have (220) and (311) surfaces that provide increased elongation and that solve a high roughness problem that rendered traditional products unsuitable for use in a lithium ion secondary battery), 10:27–34 (Cheng, disclosing that in the foils of Cheng’s invention “the roughness difference between both sides was extremely small” and thus “it was . . . not easy for the electrolytic copper foil to break or fracture during the charging-discharging cycles and the life of a battery is thus increased”), Tables 3 & 4 (Cheng, disclosing embodiments and comparative examples with TC(220) values meeting the requirements of claim 1); Ex. 1008, 6:36–44 (Wolski, disclosing that “the surface roughness Rz at the matte side of the untreated copper foil of the present invention is the same or smaller than the surface roughness Rz at the shiny side . . . so that the surface treated copper foil . . . becomes more low-profiled . . . whereby it becomes a foil having a large etching factor”), 9:1–29 & Table 2 (Wolski, disclosing 15 Dr. Randall testifies that “Kim ’761’s peak count roughness Rpc corresponds to the peak density PD of the ’706 patent.” Ex. 1003 ¶ 52. At this stage in the proceeding, this testimony is unrebutted. 38 embodiments meeting the ΔRz/Ra of claim 1, describing them as having “matte side roughnesses” that are “sufficiently small,” and as having “excellent” “high temperature elongation characteristics”), 11:37–41 (Wolski, describing comparative examples as having “large” matte side roughnesses “whereby etching factors are not good”), 12:12–27 (Wolski, teaching that “as compared with a conventional untreated copper foil, both surfaces of the untreated copper foil obtained by [Wolski’s] invention are flat” resulting in a low profile foil that has “excellent elongations at room temperature and high temperature and also high tensile strength”). The teachings in the prior art support the presently unrebutted testimony of Dr. Randall explaining why the POSA would have been motivated to modify Kim ’761’s copper foil to have the claimed TC(220) and ΔRz/Ra. Ex. 1003 ¶¶ 66–68, 71–74; Pfizer Inc., v. Sanofi Pasteur Inc., 94 F.4th 1341, 1348 (Fed. Cir. 2024) (“Where [a gap in prior art] includes a parameter not necessarily disclosed in the prior art, it is not improper to consider whether or not it would have been recognized as result-effective. If so, then the optimization of that parameter is ‘normally obvious.’”). Accordingly, we are not persuaded by Patent Owner’s argument that Petitioner failed to articulate a sufficient motivation to combine the references. To the contrary, the preliminary record presents a strong showing that the POSA would have been motivated to combine the references in the manner described in the Petition.” slip op. at 38
- Skill levelSkill level petitioner adoptedDecided for petitioner
“At this stage of the proceeding, Patent Owner does not contest Petitioner’s definition of the level of skill in the art. Prelim. Resp. 4 (“For purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art”). Petitioner’s definition appears to be consistent with the field of the invention reflected in the prior art of record and the disclosure of the ’706 patent. Accordingly, for purposes of this Decision, we adopt Petitioner’s proposed definition of the person of ordinary skill in the art.” slip op. at 21
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 11,591,706 - Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution deniedPTAB · Apr 25, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable under the asserted obviousness grounds.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“experience working on the development of materials or components for electronic devices such as batteries.” Pet. 2. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less work experience, and additional work experience could compensate for less formal education.” Id. Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’014 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). in this proceeding.” Pet. 3. Patent Owner contends that “[t]he Board need not construe any term in order to determine that institution should be denied.” Prelim. Resp. 4. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision. See Realtime Data, 912 F.3d at 1375.” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“For these reasons, we are not persuaded that Petitioner sufficiently establishes that a POSITA would have been motivated to modify Hanafusa in light of Dobashi with a reasonable expectation of success as Petitioner contends. Accordingly, we determine that Petitioner fails to demonstrate a reasonable likelihood of prevailing in its assertion that the subject matter of claim 1, and claims 4 and 8 that depend therefrom, would have been obvious over the combined teachings of Hanafusa and Dobashi.” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Petitioner also focuses on Hanafusa’s teaching that all known methods can be used to make a rough surface low-profile, and Dobashi’s teaching that RSm can be used as an indicator for judgment of the surface, to support its contention that a POSITA would have been motivated to apply Dobashi’s RSm to further achieve Hanafusa’s purpose, without explaining how and why that would be the case. In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness and is rough when RSm is small.” Id. at 3:1–3, 6:27–29. Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66– 3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66–3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 11,346,014 - Jiangsu Favored Nanotechnology Co., Ltd. v. P2i Ltd.All claims unpatentablePTAB · Apr 11, 2025 · IPR2024-00380 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1–5, 7, and 9–14 are unpatentable as obvious over Cohen and Legein or Francesch and Legein; Petitioner’s motion to strike is denied as moot.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“The parties agree that a person of ordinary skill in the art in the field of the ’087 patent in June 20154 “would have had at least a bachelor’s degree in a field such as chemistry, physics, or chemical engineering, as well as at least two years of experience with plasma-polymerization techniques.” Pet. 20 (citing Ex. 1002 ¶¶ 22–29); PO Resp. 13 (Patent Owner stating that it “does not dispute this characterization of the level of ordinary skill in the art.”); see also PO Sur-reply 1–2 (noting both parties’ agreement on the education and experience level of the ordinarily skilled artisan).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“On the fully developed trial record, we determine that no claims need an express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Because of Patent Owner’s shifting definitions of the education and experience level of the ordinarily skilled artisan, it is unclear on the complete record what precise definition Patent Owner and Dr. Senkevitch are applying when arguing the skilled artisan’s capabilities. PO Resp. 13, 22–27, 31–32, 34–40; PO Sur-reply 1–6, 11–13; Ex. 2007 ¶¶ 30, 31, 33, 34, 37, 40, 52–55, 60, 68, 74, 76, 77, 80–86, 89, 91, 94, 95, 100, 102–105, 108, 110, 111, 113–116, 118–120, 122, 124, 127–134. We, therefore, give Dr. Senkevitch’s testimony regarding the capabilities of a person of ordinary skill in the art minimal weight, which leaves us with Patent Owner’s insufficiently supported arguments regarding the skilled artisan’s capabilities. PO Resp. 13, 22–27, 31–32, 34–40; PO Sur-reply 1–6, 11–13. Moreover, as Petitioner correctly points out, the ʼ087 patent expressly teaches that the precise conditions for forming a protective polymeric coating “will vary depending upon factors such as, without limitation, the nature of the monomer compound, the crosslinking agent, the substrate, as well as the desired properties of the coating” and that such “conditions can be determined using routine methods.” Ex. 1001 15:1–15:5 (emphasis added); Pet. Reply 17. Where the patent itself leaves to the judgment of an ordinarily skilled artisan the assessment of these factors to ascertain suitable conditions for forming the protective coating, we find persuasive Petitioner’s view that it would have been well within the level of ordinary skill to ascertain such suitable conditions.” slip op. at 20
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“We disagree with Patent Owner. Although the claims of the ʼ087 patent recite obtaining the protective cross-linked polymeric coating “by exposing the device or component to a plasma,” the field of endeavor analysis in an analogous art inquiry does not exclusively turn on the claims at issue, but rather takes account of the entirety of a patent’s disclosure. See In re Bigio, 381 F.3d 1320, 1326 (Fed. Cir. 2004) (explaining that “the PTO must show adequate support for its findings on the scope of the field of endeavor in the application’s written description and claims” (emphasis added)); In re Mettke, 570 F.3d 1356, 1359 (Fed. Cir. 2009) (rejecting an argument that the field of endeavor was limited to a claimed “Internet terminal” when “the specification describes various communication media, including facsimile machines and email, as related to the invention.”). This is significant here because the ʼ087 patent discloses that “[t]he … invention relates to protective coatings” and specifically “relates to protective coatings for electronic or electrical devices and components thereof, and methods of forming such coatings.” Ex. 1001, 1:14–17. Based on this disclosure, we find that the ʼ087 patent’s field of endeavor relates to “protective coatings for electronic or electrical devices and components thereof” broadly, not just those formed on such devices or components via a plasma polymerization process as asserted by Patent Owner. Id. Although Cohen does not explicitly disclose that its crosslinked polymers constitute a “protective coating,” Cohen does disclose that its “copolymerizable mixture can be cast into films” (Ex. 1004, 2:61–62), that the polymerization can “effected in situ,” and that the polymers may be used in “numerous” electrical applications (id. at 5:17–25). Tr. 8:9–10:2, 27:2– 21; see Pet. Reply 5 (explaining how “Cohen described insulating polymers that could be applied as films and be used to protect substrates including cables and electrical coils.” (citing Ex. 1004, 2:60–63, 5:13–25)). These disclosures suggest strongly that Cohen’s crosslinked polymers––if cast into a film or formed in situ on an electrical device or component––would serve as a protective coating on that electrical device or component, even though Cohen does not expressly refer to its crosslinked polymers ipsis verbis as a “protective coating.” Thus, we find that Cohen is within the field of endeavor of the ʼ087 patent.” slip op. at 15
Patent outcomesUS 11,041,087 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,041,087 - Uatp IP LLC v. Slick Slide LLCInstitutedPTAB · Apr 8, 2025 · PGR2024-00054 · APJ Julia Heaney · PGR · Institution
The Board instituted PGR on claims 1–17 and 22–28 and all asserted grounds, finding a sufficient likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of a post-grant review is authorized by statute when “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a) (2018). Upon consideration of the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated that it is more likely than not that at least one claim challenged in the Petition is unpatentable. Further, Patent Owner has not persuaded us that it is appropriate to exercise our discretion not to institute review. Accordingly, we institute a post-grant review of all claims and all grounds asserted in the Petition.1” slip op. at 2
- Skill levelSkill level patent owner adoptedOther
“On this record, we do not find Patent Owner’s proposed experience level of at least five years in measurement and analysis of coefficient of friction to be supported. As to the necessity of experience in textile engineering and fiber science, Patent Owner’s position, although not supported by declarant analysis of the factors listed above, is consistent with the disclosure of the ’854 patent, which describes features of a mesh layer in textile and fiber terms. See e.g., Ex. 1001, 10:17–11:14, 12:65–13:8, 14:20–24. On the whole, however, we do not discern on this record how specific experience in textile engineering and fiber science of a person of ordinary skill would materially alter the outcome at this stage of the proceeding. For purposes of this decision only, we apply Patent Owner’s proposed definition of a person of ordinary skill in the art, except for the requirement of five years of experience in measurement and analysis of coefficient of friction. The level of skill in the art remains an open issue in this proceeding. Further submissions by the parties may include argument and evidence that would assist in the resolution of this issue at the close of trial.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner contends “no formal claim construction is necessary in this proceeding.” Pet. 10; Reply 1, 4. Patent Owner contends the terms “mesh layer” and “coefficient of friction” require construction. Prelim. Resp. 14–16; Sur-reply 2–5. We have considered the parties’ arguments and discuss them below with regard to each of the terms Patent Owner contends should be construed. Because our determination that Petitioner demonstrates at least one challenged claim meets the threshold for institution (see SAS Inst., 138 S. Ct. at 1359–60) is not based on construing the term “mesh layer” or “coefficient of friction,” we determine we need not construe either claim term at this stage of the proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). As further discussed below, we invite the parties to address claim construction at trial.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“We agree with Petitioner that the ’854 patent specification does not include clear and explicit lexicography or a disclaimer that would support requiring “coefficient of friction” to be determined by a specific ASTM test method. The portion of the specification Patent Owner asserts as a definition of “coefficient of friction” (see Ex. 1001, 11:31–42) is a description of an embodiment; we find it does not express patentee intent to redefine the term. Further, the statement that “the coefficient of friction … may be determined using the … ASTM D1894 standard test method” (id. at 11:32–35) indicates that use of that specific test method is optional. Accordingly, in the absence of patentee lexicography or disavowal, we do not limit the scope of the term “coefficient of friction” to require that it be measured by a specific ASTM standard. Luminara Worldwide, LLC v. Liown Elecs. Co., 814 F.3d 1343, 1353 (Fed. Cir. 2016) (“Absent lexicography or disavowal, we do not depart from the plain meaning of the claims.”); In re Am. Acad. Of Sci. Tech Ctr., 367 F.3d 1359, 1369 (Fed. Cir. 2004) (“We have cautioned against reading limitations into a claim from the preferred embodiment described in the specification, even if it is the only embodiment described, absent clear disclaimer in the specification.”). We note that the ’854 patent specification sets forth a definition for the coefficient of friction between the surfaces of the mesh material and the slide surface. Ex. 1001, 4:38–46. As stated above, however, we do not expressly construe any claim term at this stage of the proceeding. Should the parties address the construction of “coefficient of friction” at trial, we will make a determination after the close of evidence and any hearing.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialcites KSR · GrahamPatents in suitUS 11,998,854
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.