• Champion Laboratories, Inc. / First Brands Group, LLC v. Hengst SENo claims unpatentable
  PTAB · Sep 8, 2025 · IPR2024-00603 · APJ Sheldon M Mcgee · IPR · Final written decision

  Claims 1, 3, 5, 8–11, 15–17, 19, 23–25, and 28–30 were not shown unpatentable over Yokoyama, Yokoyama and Cline, or Honermann and Cline.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for petitioner

    “On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Because the level of ordinary skill in the art is not in dispute, and because the parties’ definition is consistent with the disclosures in the ʼ203 patent, the prior art, and the declaration testimony of Mr. Nranian and Dr. Basirat, we view the prior art and arguments through this lens when determining whether the claims are unpatentable as obvious over the prior art.5 See Graham, 383 U.S. at 17 (identifying “the level of ordinary skill in the pertinent art” as an underlying factual inquiry to be resolved in deciding obviousness, which is a question of law).” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “Although the parties spend significant portions of their briefing discussing the term “eccentric” and how it applies to certain figures from the ʼ203 patent and the relied-upon prior art, we determine that it is not necessary to expressly construe the term “eccentric” beyond the parties’ agreed-upon definition. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “(opining that “Patent Owner’s construction of ‘having an axis no located in a geometric center’ is too narrow”). Mr. Nranian’s Declaration testimony in this respect is not persuasive for several reasons. First, it is internally inconsistent. Compare Ex. 1016 ¶ 3 (criticizing the “axis” language in Patent Owner’s definition), with id. ¶¶ 9, 11 (relying on that very language to support an argument). Also, Mr. Nranian’s proposed definition of “eccentric” to merely mean “not located at the center” begs the question of what, precisely, is “the center”? Mr. Nranian does not persuasively explain how far a person of ordinary skill in the art would understand she could travel from the exact center point of an object and still be in “the center” of that object. See Tr. 10:13–19 (Judge McGee asking whether the center is “a miniscule point in the middle of [the] disc”); see also id. at 10:25–12:26 (Judge Weatherly highlighting the significant ambiguity in referring to something as in “the center”). Also, Mr. Nranian’s opinion is inconsistent with how the ʼ203 patent compares something that is “central,” i.e., “at the center,” and something that is “eccentrically” located. Ex. 1001, 7:13–14 (describing pipe nozzle 15 as “central”); id. at 8:53–56 (describing a “through hole” as “located in the center of the front panel 22” depicted in Figures 7 and 8); id. at 10:23–31 (describing return 12 as “in the center” and outlet 13 as “eccentrically thereto” in Figure 17). Patent Owner’s colorized and annotated Figure 7 is reproduced below: Patent Owner’s colorized and annotated version of Figure 7 of the ʼ203 patent illustrates “central pipe nozzle 15” in yellow passing through the “through hole” located in “the center” of front panel 22. PO Resp. 20. Significantly, pipe nozzle 15 and the through hole in panel 22 are both described as “central” and in “the center” but must have different diameters; otherwise, “central pipe nozzle 15” would not be capable of traveling through “through hole 22.” Ex. 1001, Fig. 7. Thus, the ʼ203 patent intrinsically bases whether an element is “central” or “in the center” on whether its axis is located at the geometric center. This is also illustrated in Figure 17 of the ʼ203 patent, reproduced below: Figure 17 of the ʼ203 patent illustrates filter housing 10 with return 12 “in the center . . . and, eccentrically thereto, the outlet 13 with the seat 14 for the blocking element 24.” Ex. 1001, 10:23–30. Finally, Mr. Nranian’s narrow interpretation of “eccentric”––which excludes the “having the axis or support so located” in the geometric center language––is at odds with the arguments it was proffered to support. Cf. Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”).” slip op. at 29

  Patent outcomesUS 9,023,203 not shown unpatentable
  Claim construction§ 103 obviousnesscites Graham
  Patents in suitUS 9,023,203
• Lenovo (United States) Inc. / Motorola Mobility LLC v. Theta IP, LLCNo claims unpatentable
  PTAB · Oct 16, 2024 · IPR2023-00697 · APJ Barbara A Benoit · IPR · Final written decision

  Claims 1, 3, 4, and 8 were not proven unpatentable: Rauhala does not disclose the required simultaneous signal-strength determinations, and Masaaki does not cure the deficiency for claim 4.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Following institution, Patent Owner maintained the same level of ordinary skill proposed in its preliminary response and did not address our discussion of the level of ordinary skill in the art in the Institution Decision. PO Resp. 24–25; see also Prelim. Resp. 24. For the reasons discussed in the Institution Decision, we adopt and apply for this Decision the level of ordinary skill articulated by Petitioner and used previously in our Institution Decision. See Dec. 8–10. In light of our review of the complete record, we find that this formulation is consistent with the ’825 patent, the prior art of record, and is supported by the testimony of Dr. Baker. See Ex. 1002 ¶¶ 27– 31. Our decision would not change, however, if we had applied Patent Owner’s proposed level of ordinary skill.” slip op. at 12

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We agree with Patent Owner that the desired signal and interferer signal must be received at the same time. The plain language of the claim requires the wireless transceiver to “receiv[e] a wireless signal having a desired signal and an interferer signal,” the determining of a signal strength of the interferer signal and the determining of a signal strength of the desired signal must be performed at the same time; otherwise, the determinations of signal strengths would not be of the same wireless signal. The specification supports this understanding. “When a receiver is actively receiving a desired signal, each block in the signal path has at its input the desired signal as well as noise and possibly interfering signals.” Ex. 1001, 5:20–22; see also id. at 5:31–33 (“FIGS. 2A and 2B illustrate examples of desired signals, interferers, and noise that may be received by one of the various circuits in a” slip op. at 21

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Rauhala does not state that the signal strengths are measured simultaneously or at the same time. Indeed, as discussed above, Rauhala indicates unequivocally in the same paragraph the opposite—that detector DET provides to control unit 42 “an indication about either the receive channel signal strength RSS or the strength of any signal on the reception band.” Ex. 1004 ¶ 17. Rauhala describes that “control unit 42 provides two one-bit control signals cA and cM” based on indications received from detector DET. Id. Importantly, Rauhala indicates that “at the same time as” describes how the control unit 42 uses the received inputs RSS and RSSn shown in Figure 4, which are described earlier in paragraph 17 as indications of either RSS or RSSn from detector DET. Id. (“Signal cA is 0 when signal RSS is greater than S4 and signal RSSn is at the 11 Dr. Baker’s reply declaration correctly quotes Rauhala paragraph 17 but cites to paragraph 18. We deem this harmless error. same time smaller than Sn. . . . Signal cM is 1 when signal RSS is not greater than S4 and signal RSSn is at the same time at least Sn. Otherwise, signal cM is 0.”). The burden remains on Petitioner to demonstrate by a preponderance of the evidence that Rauhala discloses the disputed limitations as arranged or combined in the claim. Petitioner does not persuasively reconcile these “either/or” statements regarding the functioning of detector DET with the “at the same time as” statements regarding control signals output by control unit 42 in paragraph 17. We do not find persuasive Petitioner counsel’s position expressed at the hearing that Rauhala’s “either/or” statements are “simply an imprecise description” (Tr. 16:22–24). We do not see a lack of precision in Rauhala’s “either/or” statements.” slip op. at 30

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner

    “When asked at his deposition to explain Rauhala’s use of the word “or” regarding the functioning of detector DET, Dr. Baker asserted that “[detectors] can be designed to determine RSS or RSSn.” Ex. 2016, 85:5– 12. We find Dr. Baker’s testimony that “it’s reasonable that if you can design . . . the detector to detect one or the other, you can also design it to detect both” to be without factual support. Id. at 85:13–16. He points to no textbook or other independent evidence to support that would have led one of ordinary skill to design such a detector or to support that one of ordinary skill would have understood Rauhala’s detector to be so designed. Furthermore, Dr. Baker recognizes that “Rauhala doesn’t teach the details of what’s in the detector.” Id. at 91:6–7. We give little weight to Dr. Baker’s unsupported testimony that one could design a detector to detect both RSS and RSSn from the same wireless signal. See 37 C.F.R. 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”); see also Xerox Corp. v. Bytemark, Inc., No. IPR2022-00624, 2022 WL 3648989, at *6 (PTAB 2022) (precedential) (Director affirming because “the cited declaration testimony is conclusory and unsupported, adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight”).” slip op. at 31

  Patent outcomesUS 10,129,825 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,129,825
• Lenovo (United States) Inc. / Motorola Mobility LLC v. Theta IP, LLCNo claims unpatentable
  PTAB · Oct 16, 2024 · IPR2023-00698 · APJ Thomas L Giannetti · IPR · Final written decision

  Claims 7–11, 13, and 19–21 were not shown unpatentable because Rauhala does not disclose simultaneous desired and interferer signal-strength determinations, defeating anticipation and the obviousness combination.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The two proposals are materially similar in the education requirement, but differ marginally in professional experience required (three versus five years). See supra. While we were persuaded, on the preliminary record, that both Petitioner’s and Patent Owner’s proposals were consistent with the problems and solutions in the ’202 patent and the prior art of record, on balance, we determined that Petitioner’s proposal was a better reflection of the level of skill in the prior art, and we therefore adopted it for our Institution Decision. See Institution Dec. 12–13. For this Decision, we adopt the description of the person of ordinary skill articulated by Petitioner and used previously in our Institution Decision. In light of our review of the complete record, we find that this formulation is consistent with the ’202 patent, the prior art of record, and is supported by the testimony of Dr. Baker. See Baker I Decl. ¶¶ 28–32. Our Decision would not change, however, if we had applied Patent Owner’s proposed level of ordinary skill.” slip op. at 12

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “85:13–16. He admits that “Rauhala doesn’t teach the details of what’s in the detector.” Id. at 91:6–7. He points to no textbook or other independent evidence that would have led a person of ordinary skill to design such a detector. Our Trial Practice Guide cautions against crediting such unsupported testimony: The Board has broad discretion to assign weight to be accorded expert testimony. Yorkey v. Diab, 601 F.3d 1279, 1284 (Fed. Cir. 2010). However, the testimony must be based on sufficient facts and data. Fed. R. Evid. 702(b). “Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.” 37 C.F.R. § 42.65(a). Patent Trial and Appeal Board Consolidated Trial Practice Guide 35 (Nov. 2019).7 We therefore give Dr, Baker’s unsupported testimony on this issue little weight.” slip op. at 24

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “We construe claim terms only as relevant to the parties’ contentions and only to the extent necessary to resolve the issues in dispute. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999); Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Matal, 868 F.3d 1013, 1017 (Fed. Cir. 2017). Having considered the positions of the parties, we find that for the purpose of this decision, we do not need to construe these terms to resolve a dispute.” slip op. at 9

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “requirement.” Pet. Reply 5. We do not agree with Petitioner. We find that the language of the claims supports Patent Owner’s argument that the desired signal and the interferer signal are received together. As discussed infra, claim limitations 7.7 and 7.8 recite determining a signal strength of the interferer signal and determining a signal strength of the desired signal. These determinations must be performed at the same time; otherwise, the determinations of signal strengths would not be of the same wireless signal. See Larson II Decl. ¶ 70; Baker II Decl. ¶¶ 48–49 (explaining that consideration of signal strengths detected at the same time would be “essential”). The specification of the ’202 patent further supports this finding: “When a receiver is actively receiving a desired signal, each block in the signal path has at its input the desired signal as well as noise and possibly interfering signals.” Ex. 1001, 5:22–24; see also Figs. 2A, 2B (showing interferer signals and desired signals together).” slip op. at 17

  Patent outcomesUS 10,524,202 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Graham
  Patents in suitUS 10,524,202
• Lenovo (United States) Inc. / Motorola Mobility LLC v. Theta IP, LLCInstitution denied
  PTAB · Oct 23, 2023 · IPR2023-00694 · APJ Thomas L Giannetti · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood of proving claims 1, 23, 29, or 30 obvious over the asserted combinations.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons stated below, we determine that Petitioner has not established a reasonable likelihood that it would prevail with respect to at least one claim. We, therefore, deny the Petition and do not institute inter partes review.” slip op. at 2

  • Skill levelSkill level petitioner adoptedOther

    “The two proposals are materially similar in the education requirement, but differ marginally in professional experience required (three versus five years). See supra. While we are persuaded, on the present record, that both Petitioner’s and Patent Owner’s proposals are consistent with the problems and solutions in the ’330 patent and the prior art of record, on balance, Petitioner’s proposal is a better reflection of the level of skill in the prior art, and we, therefore, adopt it for this decision. Our decision would not change, however, if we had applied Patent Owner’s proposed level of ordinary skill.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “We construe claim terms only as relevant to the parties’ contentions and only to the extent necessary to resolve the issues in dispute. See Vivid Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017). Having considered the positions of the parties, we find that for the purpose of this decision, we do not need to construe this term to resolve a dispute.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITANot reached

    “In light of the analysis of the patentability of the claims that follows, and having considered the positions of the parties, we find that for the dispute. See Vivid Techs., 200 F.3d at 803, supra. C. Other Terms We determine there are no other claim terms that need to be construed for this decision.” slip op. at 9

  Claim construction§ 103 obviousnesscites Graham
  Patents in suitUS 7,010,330
• Markforged Inc. v. Continuous Composites, Inc.No claims unpatentable
  PTAB · Sep 26, 2023 · IPR2022-00679 · APJ Sheldon M Mcgee · IPR · Final written decision

  Claims 1–12, 20, and 21 were not proven unpatentable; the asserted obviousness grounds failed for insufficient motivation to combine, teaching away, or missing claim limitations.

  RulingsFinal written decision

  • Adverse judgmentAdverse judgmentOther

    “Patent Owner statutorily disclaimed claims 13–19 on July 25, 2023, rendering Petitioner’s Grounds 4, 9, and 10 moot. Ex. 2008. Thus, our Final Written Decision does not address Petitioner’s Grounds 4, 9, and 10. The Board heard oral arguments in an in-person hearing conducted on July 27, 2023. See Paper 23.” slip op. at 4

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA”) would have had a master’s or bachelor’s degree in mechanical engineering, materials science, or a related degree, and either at least 3–5 years of experience (with a master’s degree), or at least 5–6 years of experience (with a bachelor’s degree), in composite materials or additive manufacturing. Pet. 13–14 (citing Ex. 1002 ¶ 36). Patent Owner states that it “does not agree that Petitioner’s proposed level of skill in the art accurately reflects the level of ordinary skill in the art as of the priority date . . . [, but r]egardless [of] the level of skill, . . . the Petition does not show the challenged claims are unpatentable.” Resp. 14–15. Patent Owner does not propose a different level of skill in the art. See id. at 15 (“Patent Owner reserves the right to propose a level of ordinary skill in the art later in this proceeding, or in other proceedings.”). On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). Although a more specific definition is not necessary, we adopt Petitioner’s proposed definition because, on this record, it is consistent with the disclosures of the asserted prior art references. Neither party, however, advances information explaining how or why the result in this case would change based on the level of ordinary skill determined by the Board.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner advances no specific construction of any claim term, but rather proposes that “claim terms should be given their plain and ordinary meaning.” Pet. 14. Patent Owner asserts that the term “anchor” should be construed according to its plain and ordinary meaning, which, according to Patent Owner, is “contact to which the path of composite material is adhered to enable pulling of the path.” Resp. 15 (citing Ex. 2006, 2, 53). Petitioner responds that “[i]n the parallel litigation, the Court has construed ‘anchor point’ and ‘anchor’ as ‘a contact point to which the path is affixed and that serves as an origin point for the formation of the path.’” Reply 3. On the complete record, we determine that no claim term needs an express construction to resolve the controversy. C. GROUND 1 – ALLEGED OBVIOUSNESS OF CLAIMS 20 AND 21 OVER LIPSKER” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “combining multiple embodiments from a single prior art reference (Resp. 31), i.e., “there must be a motivation to make the combination and a reasonable expectation that such a combination would be successful, otherwise a skilled artisan would not arrive at the claimed combination.” In re Stepan, 868 F.3d 1342, 1346 n.1 (Fed. Cir. 2017). On this record, Petitioner fails to provide any such motivation to combine the embodiment in Lipsker’s Figure 2 with those of Figures 4A, 4B, 4C, and 5 to arrive at the subject matter of claim 20. Pet. 23–31. Rather, Petitioner merely points to the disparate embodiments of Figures 2, 4A, 4B, 4C, and 5 and portions of Lipsker’s disclosure pertaining to those embodiments, and asserts that Lipsker “discloses” the individual limitations recited in claim 20. See, e.g., id. at 25 (Petitioner, relying on Figure 2, asserting that “Lipsker discloses the preamble of Claim 20”), 27 (Petitioner, relying on Figure 5, asserting that “Lipsker discloses Element 20[a]”), 28 (quoting Lipsker’s descriptions of wire and adhesive dispensed separately as depicted in Figure 2, and asserting “Lipsker discloses Element 20 [c]”), 29 (pointing to Figures 4A, 4B, and 4C and asserting “Lipsker discloses Element 20[d]”). Pointing to disparate embodiments without providing a sufficient motivation to combine them is not enough to establish the obviousness of claim 20 as a whole. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007) (holding that a claim “composed of several elements is not proved obvious merely by demonstrating that each of its elements was, independently, known in the prior art”).” slip op. at 14

  Patent outcomesUS 10,744,708 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 10,744,708
• Salem Fabrication Technologies Group, Inc. v. Uniglass Engineering OYInstitution denied
  PTAB · Mar 22, 2023 · IPR2022-01517 · APJ Donna M Praiss · IPR · Institution

  The Board denied institution under § 314(a), finding only claim 1 over Plumat alone met the institution threshold and the remaining grounds lacked adequate motivation to combine.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “Under 35 U.S.C. § 314(a), we may not institute an inter partes review unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons stated below, we exercise our discretion to deny institution because Petitioner has not established a reasonable likelihood that it would prevail with respect to most of its asserted grounds of unpatentability.” slip op. at 2

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “combining the references does not meet the threshold for institution. The Petition does not provide a sufficient non-hindsight biased rationale for why a POSITA would have combined Vehmas with any of Plumat, Vitkala, or Vehmas ’923 (the “base references” in the asserted grounds) in a manner that would have led to the claimed invention. Kinetic Concepts, Inc. v. Smith & Nephew, Inc., 688 F.3d 1342, 1368 (Fed. Cir. 2012) (stating “be careful not to allow hindsight reconstruction of references to reach the claimed invention without any explanation as to how or why the references would be combined to produce the claimed invention”).” slip op. at 14

  • Other 314aInstitution denied discretionary otherInstitution denied

    “remains discretionary. SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1356 (2018) (“[Section] 314(a) invests the Director with discretion on the question whether to institute review . . . .” (emphasis omitted)); Harmonic Inc., 815 F.3d at 1367 (“[T]he PTO is permitted, but never compelled, to institute an IPR proceeding.”). In exercising that discretion, we are guided by the statutory requirement, in promulgating regulations for inter partes review, to consider the effect of any regulations on “the efficient administration of the Office [and] the ability of the Office to timely complete proceedings,” 35 U.S.C. § 316(b), as well as the requirement to construe our rules to “secure the just, speedy, and inexpensive resolution of every proceeding,” 37 C.F.R. § 42.1(b). Office guidance, issued June 5, 2018, also explains that the Board may consider the number of claims and grounds that meet the reasonable likelihood standard when deciding whether to institute inter partes review under 35 U.S.C. § 314(a).11” slip op. at 24

  • PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached

    “Because we exercise our discretion to deny institution under 35 U.S.C. § 314(a), we need not address the arguments presented under 35 U.S.C. § 325(d).” slip op. at 25

  Claim construction§ 103 obviousnessDiscretionary denialcites KSR · Graham
  Patents in suitUS 8,479,540
• Salem Fabrication Technologies Group, Inc. v. Uniglass Engineering OYInstitution denied
  PTAB · Mar 22, 2023 · IPR2022-01516 · APJ Elizabeth M Roesel · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–5 were obvious over the asserted combinations.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “Pursuant to our delegated authority, we may not institute an inter partes review “unless . . . the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018); 37 C.F.R. § 42.4(a) (2022). After considering the information presented in the Petition and the Preliminary Response, we determine that the reasonable likelihood standard is not met. Accordingly, we deny institution of an inter partes review.” slip op. at 2

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We agree with Patent Owner that separate structures are required. The strongest evidence for this requirement is the claim language itself, which plainly recites two different elements: “a pressurization unit” for inside air and “a compressor” for outside air. The separate naming of two elements in the claim strongly implies that they are not one and the same structure. Becton, Dickinson & Co. v. Tyco Healthcare Group, LP, 616 F.3d 1249, 1254 (Fed. Cir. 2010) (“Where a claim lists elements separately, the clear implication of the claim language is that those elements are distinct components of the patented invention.” (punctuation omitted) (quoting Gaus v. Conair Corp., 363 F.3d 1284, 1288 (Fed. Cir. 2004))).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “At most, the similarities between each pair of references establish, as a threshold matter, that they would have been considered by a POSITA. See K-Tec, Inc. v. Vita-Mix, Corp., 696 F.3d 1364, 1375 (Fed. Cir. 2012) (to qualify as prior art in an obviousness analysis, references must be analogous art—either in the same field of endeavor, or reasonably pertinent to the problem with which the inventor is involved). But the asserted similarities alone are not sufficient to show that a POSITA would have had a reason to combine the teachings in the manner described in the challenged claims. Personal Web Techs., LLC v. Apple, Inc., 848 F.3d 987, 994 (Fed. Cir. 2017) (It is not enough that a skilled artisan, once presented with two references, would have understood that they could be combined; Petitioner needs to establish a motivation to pick out the two references and combine them to arrive at the claimed invention.). Next, Petitioner asserts that a POSITA would have been motivated to modify the glass tempering furnace of each base reference “to temper low-E glass more quickly and efficiently.” Pet. 24, 27, 30 (citing Ex. 1003 ¶¶ 82, 90, 98). As discussed below, Petitioner fails to show a sufficient logical connection between the asserted motivation and the proposed modification(s) of the base references. Stated differently, Petitioner fails to show a sufficient reason why a POSITA would have made the modifications necessary to bridge the gap between the prior art and the claimed subject matter. We discuss each pair of references more specifically below.” slip op. at 18

  • Skill levelSkill level petitioner adoptedOther

    “Petitioner contends that a person of ordinary skill in the art (“POSITA”) would have had “at least a two-year technical degree in engineering or science (materials, chemistry, etc.), or at least two years of work experience in the field of materials processing and/or fabrication (such as glass or ceramics), and/or the industrial processes and machinery used for materials processing and/or fabrication.” Pet. 7 (citing Ex. 1003 ¶ 27). For purposes of the Preliminary Response, Patent Owner does not dispute Petitioner’s definition of a POSITA. Prelim. Resp. 27. For purposes of this Decision, we apply Petitioner’s definition of a POSITA, which is consistent with the scope and content of the ’911 Patent and the asserted prior art.” slip op. at 7

  Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 8,650,911
• Markforged Inc. v. Continuous Composites, Inc.Institution denied
  PTAB · Jan 18, 2023 · IPR2022-01431 · APJ Sheldon M Mcgee · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–4 were unpatentable over the asserted obviousness grounds.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “III. ANALYSIS We have authority to institute an inter partes review only where “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Our findings and conclusions set forth in this Decision are provided for the exclusive purpose of explaining our determination that Petitioner has not met that standard on this record.” slip op. at 5

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “The question of whether the prior art references are in the same field of endeavor is merely a threshold issue that must be satisfied before an obviousness determination can be made. See K-Tec, Inc. v. Vita-Mix, Corp., 696 F.3d 1364, 1375 (Fed. Cir. 2012) (to qualify as prior art in an obviousness analysis, references must be analogous art—either in the same field of endeavor, or reasonably pertinent to the problem with which the inventor is involved). In other words, once it is determined that the prior art is analogous to the claimed invention, it is then necessary to show that it would have been obvious for the skilled artisan to select and combine the teachings of the prior art in the manner claimed. Thus, we agree with Patent Owner that the Petition needs to set forth specific reasoning as to why an ordinarily skilled artisan would have been motivated to combine these references even if they are in the same or similar fields. Prelim. Resp. 31. Petitioner fails to do so on this record. The absence of such reasoning is particularly noteworthy here in view of Ma’s numerous teachings which appear to discredit the “passive” method of pulling the composite strand from the extruder as recited in claim 4, which is challenged in each of Grounds 2 and 3. Patent Owner identifies no fewer than eight disclosures within Ma that seemingly disparage the passive “pulling” method and discuss benefits of the active “pushing” method. Prelim. Resp. 16–19 (citing Ex. 1007, 53, 95–96, 98–107, 143–147, 149, 167–168). In the absence of any explanation from Petitioner on this point, we are not persuaded that the skilled artisan would have ignored those teachings and selected Ma’s pulling method.” slip op. at 19

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “explained why the ordinarily skilled artisan would have combined the non-precoating embodiment of Lipsker’s Figure 2 and the precoating embodiment of Lipsker’s Figure 5, much less with a reasonable expectation of successfully arriving at the subject matter of challenged claims 1–3. Prelim. Resp. 22–23. As Patent Owner correctly observes (id.), Petitioner’s general assertion that “Lipsker discloses that combinations of disclosed embodiments and features are possible and proper” (Pet. 20) does not constitute a reasoned explanation regarding why the skilled artisan would have combined Lipsker’s precoating and non-precoating actuator embodiments to arrive at the claimed subject matter. Moreover, Dr. Rosen’s declaration testimony on this point is entitled to little to no weight as it merely parrots the Petition. Compare Pet. 20, with Ex. 1002 ¶ 69. 37 C.F.R. § 42.65(a).” slip op. at 14

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). A more specific definition is not necessary for purposes of deciding whether to institute review. To the extent a more specific definition is required, however, we adopt Petitioner’s proposed definition because, on this record, it is consistent with the disclosures of the asserted prior art references. In any event, for the reasons explained below, even under Petitioner’s definition, Petitioner fails to establish a reasonable likelihood of prevailing at trial with respect to any challenged claim based on the grounds of unpatentability advanced in the Petition.” slip op. at 9

  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 11,173,660
• Markforged Inc. v. Continuous Composites, Inc.Institution denied
  PTAB · Jan 11, 2023 · IPR2022-01218 · APJ Jo-Anne M Kokoski · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood of prevailing on any challenged claim, including because Ma taught against pulling, combinations lacked adequate motivation, and Wohrl did not disclose the claimed …

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2021). For the reasons discussed below, we deny the Petition and do not institute an inter partes review.” slip op. at 2

  • Skill levelSkill level board ownOther

    “Petitioner contends that a person having ordinary skill in the art (“POSITA”) would have had “a master’s degree in mechanical engineering, materials science, or a related degree, and at least 3–5 years of experience in composite materials or additive manufacturing,” or a bachelor’s degree in the same fields and at least 5–6 years of experience. Pet. 12–13 (citing Ex. 1002 ¶ 36). Patent Owner states that it “does not agree that Petitioner’s proposed level of skill in the art accurately reflects the level of ordinary skill in the art as of the priority date . . . . Regardless of what level of skill is applied, however, the Petition does not show a reasonable likelihood to prevail.” Prelim. Resp. 3. Patent Owner does not propose a different level of skill in the art at this stage of the proceeding. See id. at 3–4 (“Patent Owner reserves the right to propose a level of ordinary skill in the art in this proceeding should it be instituted, or in other proceedings.”). On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). A more specific definition is not necessary for purposes of deciding whether to institute review.” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner asserts that the “claim terms should be given their plain and ordinary meaning because, to the extent certain claim terms are subject to multiple interpretations, those questions do not affect the grounds advanced here.” Pet. 13 (footnote omitted). Patent Owner does not address claim construction at this stage of the proceeding. See generally Prelim. Resp. We determine that no claim term requires express construction for purposes of this Decision.” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayNot shown unpatentableMotivation not foundNot shown unpatentable

    “Ma distinguishes between these two methods, noting that with the “active” method, “the forming quality of a previous layer does not influence the forming of the current layer,” while with the “passive” method, “the quality of a previous layer has a profound effect on the forming quality of the current layer.” Ex. 1007, 53. Ma sets forth other problems with using the “passive” method. See, e.g., id. at 95–96, 98–107, 143, 145–147, 149. For example, Ma teaches that during deposition using the “passive” method, “it is possible to make a big error, especially when the nozzle makes a big-angle turn” (id. at 98), and that “[a] toolpath error could be generated if an anchoring point is not formed properly” when using the “passive” method (id. at 143). Ma also discloses that forming speed is an issue with the “passive” method, (id. at 146), but discloses “[o]ne of the advantages [of the ‘active’ method] is that the forming speed is not limited by the solidification condition of the towpreg during the forming process” (id. at 168). 2. Analysis Claim 1 recites, inter alia, “moving the nozzle away from the anchor during discharging to pull the path of the composite material out of the nozzle.” Ex. 1001, 10:61–63. Petitioner contends that Ma teaches this limitation because “Ma discloses that ‘when the object moves relative to the nozzle during the forming process, the towpreg is pulled out by the object instead of being pushed out by nozzle pressure” and “the anchor points are used to pull the towpreg (‘the path of the composite material’) out of the nozzle during discharging.” Pet. 33 (citing Ex. 1007, 38, 72)(emphasis omitted). controlled layer manufacturing: an “active” method that pushes the composite material from an extruder’s orifice, and a self-anchoring or “passive” method, wherein the composite material is pulled out by the object. Ex. 1007, 7–8, 52–54. Here, Petitioner relies on Ma’s disclosures relating to the passive method. Petitioner, however, fails to provide a persuasive explanation as to why a POSITA would have selected Ma’s passive pulling method over Ma’s active pushing method for further development or improvement. Petitioner’s failure to do so is particularly noteworthy here, because Ma includes numerous teachings against the passive method of pulling the composite material through the nozzle. Indeed, Patent Owner identifies no fewer than eight disclosures within Ma that seemingly disparage the passive pulling method and discuss the benefits of the active pushing method. Prelim. Resp. 7–10 (citing Ex. 1007, 53, 95– 96, 98–107, 143–147, 149, 167–168). We also agree with Patent Owner that Petitioner has not sufficiently explained why the ordinarily skilled artisan would have combined Ma’s active and passive methods, much less with a reasonable expectation of successfully arriving at the subject matter of claim 1. Id. at 11–14. In the absence of any explanation from Petitioner, we are not persuaded that a POSITA would have ignored Ma’s teachings against the passive pulling method and selected Ma’s pulling method over Ma’s active pushing method for further development and improvement. Accordingly, Petitioner has not demonstrated a reasonable likelihood that claim 1 would have been obvious over Ma.” slip op. at 8

  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 9,987,798
• Markforged Inc. v. Continuous Composites, Inc.Institution denied
  PTAB · Sep 9, 2022 · IPR2022-00652 · APJ Jo-Anne M Kokoski · IPR · Institution

  The Board denied institution because the Petition did not show a reasonable likelihood that claims 1–15 and 17–41 were unpatentable over the asserted obviousness combinations.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2021). For the reasons discussed below, we deny the Petition and do not institute an inter partes review.” slip op. at 2

  • Skill levelSkill level board ownOther

    “Petitioner contends that a person having ordinary skill in the art (“POSITA”) would have had “a master’s degree in mechanical engineering, materials science, or a related degree, and at least 3–5 years of experience in composite materials or additive manufacturing,” or a bachelor’s degree in the same fields and at least 5–6 years of experience. Pet. 9 (citing Ex. 1002 ¶ 36). Patent Owner states that it “does not agree that Petitioner’s proposed level of skill in the art accurately reflects the level of ordinary skill in the art as of the priority date . . . . But regardless of what level of skill is applied, the Petition does not show a reasonable likelihood to prevail.” Prelim. Resp. 10. Patent Owner does not propose a different level of skill in the art at this stage of the proceeding. See id. (“Patent Owner reserves the right to propose a level of ordinary skill in the art in this proceeding should it be instituted, or in other proceedings.”). On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “We construe each claim “in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b) (2019). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019).” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “teachings of multiple references, an articulated reason with some rational underpinning to combine the known elements in the fashion claimed must be provided. See KSR Int’l Co. v. Teleflex, Inc., 550 U.S. 398, 418 (2007); see also In re Magnum Oil Tools, Int’l, Ltd., 829 F.3d 1364, 1381 (Fed. Cir. 2016) (It is the petitioner’s “burden to demonstrate both that a skilled artisan would have been motivated to combine the teachings of the prior art references to achieve the claimed invention[s], and that the skilled artisan would have had a reasonable expectation of success in doing so.”) (citation and internal quotation omitted). Having reviewed the parties’ arguments and evidence of record, we are not persuaded that Petitioner provides sufficient articulated reasoning with a rational underpinning as to why one of ordinary skill in the art would have combined the teachings of Lipsker and Wohrl in the manner recited in the challenged claims.” slip op. at 12

  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 9,511,543

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.