- CSPC Megalith Biopharmaceutical Co., Ltd. v. Lepu Biopharma Co. Ltd.All claims unpatentablePTAB · Oct 8, 2026 · IPR2025-00685 · APJ Ryan H Flax · IPR · Final written decision
Claims 1–23 are unpatentable as obvious over Wei and Liu, and over Leanna, Wei, and Liu.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“appears to be generally consistent with the level of skill presented in the cited prior art. See generally, e.g., Exs. 1005–1008; see also Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art itself may reflect an appropriate level of skill in the art). However, as at institution, we reject the portion of Petitioner’s proposed definition that includes having “access to other individuals with that knowledge and experience,” as not reflecting the individual level of skill of a given skilled artisan. See, e.g., Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986) (holding that “[t]he person of ordinary skill is a hypothetical person who is presumed to be aware of all the pertinent prior art.”) (emphasis added, footnotes omitted); but see Indivior Inc. v. Dr. Reddy’s Labys., S.A., 930 F.3d 1325, 1343 (Fed. Cir. 2019) (no clear error in determination that “a person of ordinary skill . . . ‘would be on a team with an engineer or scientist . . . .’”). Consequently, we find the person of ordinary skill in the art was a person who had a Ph.D. in immunology, molecular biology, cellular biology, or a similar field, or an M.D. with similar experience, and had at least five years of experience with antibodies and antibody engineering.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner submits that no term of the Challenged Claims requires construction to resolve the challenges in this Petition.” Pet. 32. We did not construe any terms in our Institution Decision. See DI 6–7. Patent Owner presents no express positions on claim construction. See generally Resp. For the purposes of this Decision, no terms of the challenged claims require construction. Phillips, 415 F.3d at 1312–13. D. slip op. at 12
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“2 G. Wei et al., US 2015/0071923 Al, pub. March 12, 2015. Ex. 1005 (“Wei”). 3 J. Liu, CN 103772504 A, pub. May 7, 2014. Ex. 1007. The Liu reference is published in Simplified Chinese and Petitioner filed a certified English translation, to which we refer herein. See Ex. 1008 (“Liu”). Patent Owner does not contest the accuracy of the translation. See generally Resp. 4 M.R. Leanna & C.L. Becker, WO 2014/152199 A1, pub. Sept. 25, 2014. Ex. 1006 (“Leanna”). 5 Based on our review of each deposition transcript in view of the record as a whole, although each witness appears competent, we are left with the impression that Dr. Bournazos’s testimony is somewhat more credible than Dr. Atanackovic’s. This conclusion is based, inter alia, on each witness’s ability to recall the relevant record and respond to questions on evidentiary and technical issues.” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“We find that combining Liu’s BA03 antibody with Wei’s ADC platform would have been desirable, predictable, and routine for the ordinarily skilled artisan based on the facts that: (1) cetuximab was a wellknown and well-studied, U.S. regulatory approved, anti-EGFR antibody that would have served as a starting point for new cancer therapies; (2) humanization of therapeutic antibodies is generally desired (and “[e]very antibody can be humanized” and it is advantageous according to Patent Owner’s counsel); (3) BA03 was a well-known humanized version of cetuximab that had several known advantages over cetuximab in addition to lower immunogenicity from humanization; and (4) Wei taught a similar cetuximab-derived antibody, and a humanized cetuximab-derived antibody, each provided in an ADC with a well-known and validated off-the-shelf linker-drug platform, i.e., vc-MMAE, that exhibited a strong anti-tumor response. See, e.g., Ex. 1001, 1:57–2:32, 2:50–3:1, 5:6–53, 18:3–33, 19:26– 29; Ex. 1002 ¶¶ 14, 38, 42–43, 45–53, 56–73, 84–92, 109–117, 178–189, 202–271; Ex. 1005 ¶¶ 9–10, 229–232, 434, 437, 476, 491–506, 664–675, 685, 688, 715, 732, 1103, 1092–1141; Ex. 1008 ¶¶ 3–6, 60, 74, 141–160; Ex. 2027 ¶¶ 7–8, 38, 50, 57 (confirming our understandings regarding the claimed antibody and linker-drug payload); Ex. 2023, 173, 300; see also Resp. 1, 5–6, 23 (Patent Owner made the “choice” to use the prior-art-known BA03 antibody, and known-candidate cytotoxic payload MMAE); Hr’g Tr. 34:20–23, 36:6–38:20, 47:16–50:16 (Patent Owner’s counsel’s argument). When Liu’s BA03 antibody is provided in an ADC with a vc- MMAE or a Mc-vcPAB-MMAE platform (and used as cancer therapy as the references instruct) the invention of the challenged claims is achieved.” slip op. at 52
Patent outcomesUS 10,792,370 unpatentableClaim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 10,792,370 - Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Evenflo Company, Inc. v. Baby Jogger II, LLCAll claims unpatentablePTAB · Sep 29, 2026 · IPR2025-01122 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–16 are unpatentable as obvious over Liao or Liao and Cheng; Rolicki is not prior art, and the challenge over Offord ’341 and Offord ’797 fails.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“A. Level of Ordinary Skill in the Art Baby Jogger does not dispute Evenflo’s definition of the level of ordinary skill in the art, which is that a person of ordinary skill in the art (hereinafter, “one skilled in the art”) would have had “a bachelor’s degree in a relevant field (e.g., mechanical engineering or industrial design) and at least two years of product design experience and/or industry experience with juvenile products” and that “[m]ore education can replace product design experience, and vice versa.” Pet 8 (citing Ex. 1001 ¶¶ 31–33); PO Resp. generally. We apply that definition here, as it accords with the problems addressed in the prior art and the specification of the ’682 patent.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“At the outset, we note that the claim language requires only that “the first seat and the second seat” be arranged in an inline descending configuration, not that the seat’s mounting points or other physical connections be so arranged. Ex. 1010, 17:31–33. Baby Jogger improperly reads “seats” out of the claim and substitutes the seat’s “mounting points” on the frame. A proper reading of the claim language focuses on what happens when both seats are connected to the frame, not where they are so connected. In other words, “when connected to the frame” simply emphasizes that both seats must be connected to the frame to form the inline descending configuration, as opposed to the single stroller embodiment of Figure 1, where there cannot be an inline descending configuration because only one seat is connected to the frame and the other seat is removed, i.e., not connected to the frame. That reading is supported by the specification of the ’682 patent,” slip op. at 9
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner
“We find that testimony persuasive, for it shows what one skilled in the art would have recognized the 2008 Provisional as necessarily disclosing. The relevant inquiry is whether the disclosure of the prior application “convey[s] with reasonable clarity to those skilled in the art that, as of the filing date sought, the inventor was in possession of the invention.” PowerOasis, 522 F.3d at 1306 (emphasis in original; citation omitted). “While a prior application need not contain precisely the same words as are found in the asserted claims, . . . the prior application must indicate to a person skilled in the art that the inventor was ‘in possession’ of the invention as later claimed.” Id. In other words, “to satisfy the written description requirement, ‘the missing descriptive matter must necessarily be present in the [original] application’s specification such that one skilled in the art would recognize such a disclosure.’”7 Id. (quoting Tronzo v. Biomet, Inc., 156 F.3d 1154, 1159 (Fed. Cir. 1998) (emphasis added). “This requires that the written description actually or inherently disclose the claim element.” Id. at 1306–07. Moreover, a drawing may supply written description for the arrangement it depicts even though the text describes that arrangement in different terms. See Cooper Cameron Corp. v. Kvaerner Oilfield Prods., Inc., 291 F.3d 1317, 1319–23 (Fed. Cir. 2002).” slip op. at 16
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Instead, Evenflo’s argument rests on isolating the statement—“A similar sub-frame arrangement is disclosed in [Offord ’797]”—from the remainder of the passage in which that statement appears in order to arrive at a reason to incorporate the reversibility teaching of Offord ’797. However, when that statement is read in the context of the full passage in which it appears, nowhere does that passage suggest reversibility as the reason for referencing Offord ’797. More accurately, it suggests a different reason that relates to a curved lug 108 by which sub-frame 100 rests on the stroller’s main frame 4 to carry the weight of the stroller’s two occupants— When the interface components 100 are attached to the frame assembly 4 they form a sub-frame of the frame assembly 4, and when the child-carrying units are mounted thereon, one behind the other, they are in a compact echelon formation, one of the connector sockets 106 of each component 100 being at a higher level in relation to the ground than the other connector sockets 106. The higher connector socket 106 and further connecting leg 102 are both connected to the respective opposite ends of an upper mounting piece 107. In addition, on the inner side of the lower connector sockets 106 there is a downwardly curved lug 108 which serves to rest upon a part of the basket frame 44, such that the weight of two infants is fully supported by the frame assembly 4. A similar sub-frame arrangement is disclosed in [Offord ’797]. Ex. 1051, 9:23–36 (emphasis added). That passage shows that, rather than reversibility of the sub-frame, the reference to Offord ’797 is more aptly directing the reader to the arrangement and details of a similarly curved lug structure in the stroller sub-frame of Offord ’797. Indeed, Figures 5 and 6 of Offord ’797, reproduced below, disclose just such a curved lug in the context of “corner pieces 20” having “channel 21.” Ex. 1054, 4:10–23.” slip op. at 53
Patent outcomesUS 11,731,682 unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 11,731,682 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentablePTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other
“Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner
“We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29
Patent outcomesUS 11,886,774 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - Crowdstrike, Inc. v. Gosecure, Inc.Some claims unpatentablePTAB · Aug 12, 2026 · IPR2025-00070 · APJ Neil T Powell · IPR · Final written decision
Claims 1, 3–7, and 9–21 are unpatentable as obvious; claims 2 and 8 were not shown unpatentable because the asserted art did not meet their construed limitations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“III. ANALYSIS LEVEL OF ORDINARY SKILL A. Petitioner explains the applicable level of skill in the art as follows: As of June 24, 2010, a person of ordinary skill in the art (POSITA) would be a person having a bachelor’s degree in computer science, computer engineering, or an equivalent, as well as two years of industry experience and who would have had a working knowledge of software security analysis, and dynamic malware analysis. Additional graduate education could substitute for professional experience, or significant experience in the field could substitute for formal education. Pet. 8 (Ex. 1003 ¶¶ 30–31). Patent Owner does not dispute Petitioner’s explanation of the level of skill in the art. See Ex. 2031 ¶¶ 15–16. We adopt Petitioner’s uncontested proposed level of ordinary skill in the art, which we find consistent with the level of ordinary skill in the art reflected by the ’872 patent and the prior art of record. See Okajima v.” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“We begin with the claim language in view of the Specification, which weighs heavily against Patent Owner’s position that we should rewrite “computer system” as narrowly referring to a “computing device.” PO Resp. 24. As Petitioner notes, the ’872 patent’s Specification uses “computer system” to refer to a wide range of equipment, from a component of a computing device, to a whole computing device, to a collection of computing devices. Reply 9–10 (citing Ex. 1001, 4:5–8, 11:15–18, 16:50–55). In one example, the Specification refers to “one or more other computer systems (e.g., protected network devices 136).” Ex. 1001, 18:52–53. Thus, the Specification lists “protected network devices 136” as only an example of “other computer systems,” demonstrating that “computer systems” refers to things other than protected network devices. Although Patent Owner may be correct that this passage more than a single computing device,” we find that other disclosures in the ’872 patent do. Specifically, the Specification uses the language “distributed computer system” when referring to numerous components, including “protected network devices” and an “IDS/IPS system.” Ex. 1001, 3:26–28; Reply 10. In addition to showing that a “computer system” is not limited to a single computing device, this conveys that a “computer system” according to the ’872 patent can include an IDS/IPS.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“Based on our review of the complete record, we find Petitioner’s arguments and evidence to be more persuasive. Patent Owner does not dispute Petitioner’s argument and evidence that capturing detailed information like Goel’s activity sources, activity targets, and association was recognized as enhancing threat analysis. Pet. 44 (citing Ex. 1003 ¶ 79); see PO Resp. 55–59; Sur-Reply 15–17. Additionally, contrary to Patent Owner’s suggestion, we find that the Petition does not propose incorporating Goel’s kernel hooks into Capalik’s system. See Pet. 41–46. Patent Owner contends that the Petition’s reference to modifying Capalik by “adding lines of code” suggests implementing the code disclosed in Goel include kernel hooks. Id. Notwithstanding Patent Owner’s assertion otherwise, this is an unpersuasive bodily incorporation argument, as the Petition never says an ordinarily skilled artisan would have used the exact lines of code from Goel in Capalik. Rather, the Petition says that an ordinarily skilled artisan would have had sufficient skill to implement straightforward code modifications to identify activity sources, targets, and associations: a [person of ordinary skill in the art] would have understood that modifying Capalik’s system (e.g., Linux-based) to additionally monitor, identify, and store each individual activity of an attack including “activity sources, activity targets, and associations” would have required straightforward modifications to programs/code instructions, which would have been well-within the skillset of a [person of ordinary skill in the art]. Pet. 46. Patent Owner argues that Petitioner does not explain how an ordinarily skilled artisan would have modified Capalik without using kernel hooks. Sur-Reply 17. But Patent Owner does not cite any evidence to counter Dr. Jakobsson’s testimony that an ordinarily skilled artisan would have had the skill to apply Goel’s general teaching of identifying sources, targets, and associations to Capalik’s system. Ex. 1003 ¶ 182. On the whole, the evidence does not support Patent Owner’s position that the combination would have required substantially increased detection risk. Moreover, even if the combination would have somewhat increased detection risk, Petitioner persuades us that an ordinarily skilled artisan still would have had reason to combine the references teachings. Patent Owner’s allegations of increased detection risk do not negate the undisputed evidence that the combination would have provided the advantage of improved threat analysis. Pet. 44 (citing Ex. 1003 ¶¶ 175–182). Ultimately, Patent Owner’s that activity logging be undetectable.” PO Resp. 56 (emphasis added) (citing Ex. 1004 ¶ 6). This exaggerates Capalik’s disclosure. Although the cited paragraph suggests that certain systems unfortunately may be detectable by some users, it does not convey that it is a requirement for the system to be categorically undetectable. See Ex. 1004 ¶ 6.8 In sum, Petitioner persuades us by a preponderance of the evidence that it would have been obvious to modify Capalik “to identify and store unauthorized activities including the activity source, activity target, and association of each activity.” Pet. 41–46; PO Resp. 55–59; Reply 20–22; Sur-Reply 15–17.” slip op. at 47
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for patent owner
“arguments and evidence, we determine that Patent Owner fails to sufficiently show a nexus between any of its objective indicia evidence and the claimed invention. See Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (“The patentee bears the burden of showing that a nexus exists”). A showing of sufficient nexus is required to establish that the evidence relied upon traces its basis to a novel element in the claim, not to something in the prior art. Institut Pasteur & Universite Pierre Et Marie Curie v. Focarino, 738 F.3d 1337, 1347 (Fed. Cir. 2013). Objective evidence that results from something that is not “both claimed and novel in the claim” lacks a nexus to the merits of the invention. In re Kao, 639 F.3d 1057, 1068 (Fed. Cir. 2011) (emphasis omitted). Thus, establishing nexus involves a showing that novel elements in the claim, not prior-art elements, account for the objective evidence of nonobviousness. Id. As discussed above, Petitioner shows that Capalik teaches all limitations of claim 1. Petitioner persuades us that none of claim 1’s elements individually nor any combination thereof is novel over Capalik’s disclosure. Accordingly, claim 1 is not novel over Capalik, which disproves Patent Owner’s assertion of nexus. PO Resp. 73–76. Moreover, even if claim 1 were novel, Patent Owner otherwise fails to show nexus for its commercial success, praise, or copying assertions. Patent Owner’s evidence does not show that Petitioner’s commercial product embodies claim 1. For example, we agree with Petitioner that Patent Owner “failed to analyze any meaningful detail regarding” how the Falcon Platform allegedly meets limitation 1(d). Reply 28–29. In particular, Patent Owner has not sufficiently addressed limitation 1(d) with the following argument: “1[D] The Falcon Platform transmitted to other computer systems” slip op. at 37
Patent outcomesUS 9,954,872 mixedClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 9,954,872 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision
Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21
Patent outcomesUS 11,326,227 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,326,227 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision
Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25
Patent outcomesUS 10,961,602 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,961,602 - GD Energy Products, LLC v. Kerr Machine CompanyAll claims unpatentablePTAB · Jun 29, 2026 · PGR2025-00031 · APJ Ryan H Flax · PGR · Final written decision
Claims 1–14 are unpatentable as obvious under each of four asserted grounds: Kerr; Aplex and Stanton; Blume, Stanton, and Wilkinson; and the sale of the Kerr Pump.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The person of ordinary skill in the art would have a minimum of a bachelor’s degree in mechanical or petrochemical engineering, or a comparable engineering discipline, and a minimum of 3-5 years of work experience in the design and/or manufacturing of reciprocating pumps and valves, including fluid ends and/or comparable high pressure fluid components, for industrial applications, including for use in the oil and gas industry. See, e.g., EX1003, ¶32.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We decline to expressly construe any claim language. slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“Regarding the combining of Aplex and Stanton, Petitioner asserts that the ordinarily skilled artisan would have understood that providing a packing/stuffing arrangement, as taught by Stanton, within a fluid end housing, as taught by Aplex, would improve pressure and fluid isolation compared with an arrangement where the packing was bolted to the outside of the fluid end as in Aplex unmodified. Pet. 66 (citing Ex. 1003 ¶¶ 189, 236). Patent Owner does not dispute this rationale. We find this to be a reason, with rationale underpinning, why the person of ordinary skill in the art would have combined these references with a reasonable expectation of success.” slip op. at 29
- Adverse judgmentOther
“The record indicates that Patent Owner has statutorily disclaimed claim 15 as of April 28, 2025. Ex. 2206.” slip op. at 8
Patent outcomesUS 12,152,582 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 12,152,582 - Jumio Corporation v. Facetec, Inc.No claims unpatentablePTAB · Jun 17, 2026 · IPR2025-00109 · APJ Bach V Hoang · IPR · Final written decision
Claims 1–24 were not shown unpatentable because the petitioner failed to establish motivation to combine the references and failed to show the claimed different-distance image capture.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Having considered the full record at trial, we maintain the preliminary finding regarding the level of ordinary skill in the art. See Inst. Dec. 11–12. In particular, based on the teachings of the ’910 Patent and the asserted prior art, we are persuaded that an ordinarily skilled artisan would have had a work experience related to biometrics, facial authentication, computer vision, and/or optics as at least one of those fields is respectively implicated by the ’910 Patent and the asserted prior at. Moreover, our decision would be the same under either proposed level of skill.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“C. Claim Construction We interpret claim terms using “the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). Under the principles set forth by the Federal Circuit, the “words of a claim ‘are generally given their ordinary and customary meaning,’” as would be understood by a person of ordinary skill in the art at the time of the invention. Phillips v. AWH Corp., 415 F.3d 1303, 1312 (Fed. Cir. 2005) (en banc) (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). The parties do not dispute any claim terms or phrases and our decision does not require construing any particular claim terms or phrases, therefore, we do not expressly construe any particular claim term or phrase. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“We find that these reasons would not have adequately motivated a person having ordinary skill in the art to combine and modify the references in Petitioner’s asserted manner to reach the claimed features. Petitioner’s motivations — “substitution,” “obvious alternative . . . approaches,” “use of a known technique,” and “complimentary” techniques — are all similarly based on swapping or adding techniques for verifying three dimensionality. See Pet. 13–17; Pet. Reply 16–17. Those motivations might have been suitable had Tanii described techniques to verify three dimensionality, but Petitioner has not shown that Tanii describes any technique to verify three dimensionality. See Pet. 13–17, 25–28. Instead, as discussed above, Tanii describes the existence of the perspective distortion phenomenon and a technique for correcting it. As such, substituting the knowledge that perspective distortion exists and techniques to correct it does not correspond adequately motivate Petitioner’s combination. Put another way, because Tanii does not teach an approach for verifying three-dimensionality, Tanii’s techniques cannot be used as a substitute for approaches that do verify three dimensionality simply because Tanii discloses the concept of perspective distortion.” slip op. at 16
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“distance from the user. Derakhshani teaches two different approaches (1) focus-distance approach and (2) parallax approach. Petitioner acknowledges that the focus-distance approach does not expressly disclose capturing a second image at a second distance. Pet. 13 (distinguishing “focus distances” from “actual distances.”). This is because focus-distance, by definition, is not actual distance. Ex. 1005, 16:47–48 (“Focus distance is the distance from a sensor to a point in its field of view that is perfectly in focus.”) In Derakhshani’s focus-distance approach the camera stays the same distance from its subject—only the focus distance changes. Id. at 16:66–17:2 (“By comparing degree of focus for a landmark in images with different focus distances, the distance from the sensor to the landmark may be estimated.”) Derakhshani’s parallax approach also does not expressly disclose capturing a second image at a second distance. In the parallax approach the camera is rotated or slid about the user to create images with different perspectives. Ex. 1005, 17:59–64 (“In some implementations, the sensor is moved about the subject during image capture to collect image data from different orientations relative to the subject. For example, a single camera may be rotated or slid slightly or multiple cameras at different positions may be used for image capture.”). Rotating a camera around a user does not change the distance of the camera from the user. At the hearing Petitioner, indicating that Derakhshani takes a second image at a second distance. Tr. 16:9–12 (“[Petitioner’s Counsel: . . . Dr. Daft is talking about some of the terms that Derakhshani is using. For example, the term slid and shown in the images, he talks about how slid refers to the different distances between the sensor and the user.”). We determine that it is more likely that the word “slid,” as used in the relevant portion of Derakhshani, further describes the rotation of the camera about the user. Derakhshani indicates as much by describing that both rotating and sliding the camera are examples of how the camera sensor is “moved about the subject during image capture.” Ex. 1005, 17:60–61. Thus, sliding the camera does not necessarily disclose moving the camera to a second distance from the subject. Zhang also does not expressly disclose capturing a second image at a second distance. Petitioner acknowledges as much stating “[a]lthough Zhang does not expressly say that the second image is captured at a second distance different from the distance of the first image, this would have been obvious to a POSITA.” Pet. 61 (citing Ex. 1003 ¶ 1046). Because Zhang does not expressly disclose capturing a second image at a second distance, Petitioner once again relies on expert testimony to argue that the multiple images disclosed in Zhang would have been taken at different perspectives resulting from rotating or translating the position of the camera and that taking images at different distances would have enhanced Zhang’s homography-transformation procedure. Pet. 61–62 (citing Ex. 1003 ¶ 1046). From here Petitioner repeats many of the same arguments it made regarding the parallax approach from Derakhshani, except that these arguments are on even weaker footing because Zhang does not mention taking images by translating the position of the camera, nor even that the multiple images taken should be from different perspectives. Each of these assertions are made solely on the basis of Petitioner’s expert testimony, and as such are not persuasive. Pet. 61–62 (citing Ex. 1003 ¶¶ 1046). Petitioner’s argument that Zhang teaches capturing a second image at a second distance simply lacks sufficient support from Zhang’s disclosure.” slip op. at 25
Patent outcomesUS 11,874,910 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,874,910 - Jumio Corp. v. Facetec, Inc.No claims unpatentablePTAB · Jun 17, 2026 · IPR2025-00108 · APJ Nabeel U Khan · IPR · Final written decision
Claims 1–24 were not shown unpatentable because the asserted combinations lacked adequate motivation to combine and did not teach capturing images at different distances.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner argues Petitioner’s proffered level of skill is too broad with respect to work experience. PO Resp. 27–28. Patent Owner counters that a person having ordinary skill in the art would have had a Bachelor’s degree in electrical engineering, computer engineering, computer science, physics, or a related field, and two years’ work experience related to biometric security, facial authentication, and three-dimensional computer vision such that they would have had significant academic and/or work experience in both facial biometrics and computer vision. Id. at 28–29. Having considered the full record at trial, we maintain the preliminary finding regarding the level of ordinary skill in the art. See Inst. Dec. 13–14. In particular, based on the teachings of the ’938 patent and the asserted prior art, we are persuaded that an ordinarily skilled artisan would have had a work experience related to biometrics, facial authentication, computer vision, and/or optics as at least one of those fields is respectively implicated by the ’938 patent and the asserted prior at. Moreover, our decision would be the same under either proposed level of skill.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“C. Claim Construction We interpret claim terms using “the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). Under the principles set forth by the Federal Circuit, the “words of a claim ‘are generally given their ordinary and customary meaning,’” as would be understood by a person of ordinary skill in the art at the time of the invention. Phillips v. AWH Corp., 415 F.3d 1303, 1312 (Fed. Cir. 2005) (en banc) (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). The parties do not dispute any claim terms or phrases and our decision does not require construing any particular claim terms or phrases, therefore, we do not expressly construe any particular claim term or phrase. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“images are three dimensional—let alone a technique that captures two images at different distances, compares the images for certain differences, and verifies three dimensionality based on those differences, as recited by the claim. Instead, Tanii describes a system that “corrects warp in which the perspective is exaggerated when an image is captured with the user’s face at close range.” Ex. 1007, code (57). In particular, Tanii recognizes the physical phenomenon of perspective distortion (fish-eye distortion) where “[i]f the image of the face of a person or the like is captured from a point that is relatively nearby, an image is obtained in which the perspective appears exaggerated,” i.e., the user image is warped or distorted. Id. ¶ 6; see id. ¶ 48, Fig. 4B. Tanii corrects such warped images by enlarging peripheral areas of the user image. Id. ¶¶ 55–56.” slip op. at 17
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“distance from the user. Derakhshani teaches two different approaches: (1) focus-distance approach and (2) parallax approach. Petitioner acknowledges that the focus-distance approach does not expressly disclose capturing a second image at a second distance. Pet. 12 (distinguishing “focus distances” from “actual distances.”). This is because focus-distance, by definition, is not actual distance. Ex. 1005, 16:47–48 (“Focus distance is the distance from a sensor to a point in its field of view that is perfectly in focus.”) In Derakhshani’s focus-distance approach the camera stays the same distance from its subject—only the focus distance changes. Id. at 16:66–17:2 (“By comparing degree of focus for a landmark in images with different focus distances, the distance from the sensor to the landmark may be estimated.”) Derakhshani’s parallax approach also does not expressly disclose capturing a second image at a second distance. In the parallax approach the camera is rotated or slid about the user to create images with different perspectives. Derakhshani, 17:59–64 (“In some implementations, the sensor is moved about the subject during image capture to collect image data from different orientations relative to the subject. For example, a single camera may be rotated or slid slightly or multiple cameras at different positions may be used for image capture.”). Rotating a camera around a user does not change the distance of the camera from the user. At the hearing Petitioner, instead, focused specifically on the use of the word “slid” in Derakhshani as indicating that Derakhshani takes a second image at a second distance. Tr. 16:9–12 (“[Petitioner’s Counsel: . . . Dr. Daft is talking about some of the terms that Derakhshani is using. For example, the term slid and shown in the images, he talks about how slid refers to the different distances between the sensor and the user.”). We determine that it is more likely that the word “slid,” as used in the relevant portion of Derakhshani, further describes the rotation of the camera about the user. Derakhshani indicates as much by describing that both rotating and sliding the camera are examples of how the camera sensor is “moved about the subject during image capture.” Derakhshani, 17:60–61. Thus, sliding the camera does not necessarily disclose moving the camera to a second distance from the subject.” slip op. at 27
Patent outcomesUS 11,693,938 not shown unpatentableClaim construction§ 103 obviousnesscites KSRPatents in suitUS 11,693,938
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.