- PTAB · May 3, 2023 · IPR2023-00145 · APJ Donna M Praiss · IPR · Institution
The Board denied institution because Petitioner failed to show a reasonable likelihood of prevailing on any asserted obviousness ground for the challenged claims.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Under 35 U.S.C. § 314(a), we may not institute an inter partes review unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons stated below, we deny institution because Petitioner has not established a reasonable likelihood that it would prevail with respect to any of its asserted grounds of unpatentability.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“(POSITA) “would have at least a bachelor’s degree in a relevant scientific field, e.g., physics, materials science or engineering, or electrical engineering, and two or more years of experience in lighting design with LED fixtures for lighting applications.” Pet. 2 (citing Ex. 1003 ¶¶ 37–40). For purposes of the Preliminary Response, Patent Owner does not dispute Petitioner’s description of the level of skill in the art. Prelim. Resp. 11. For purposes of this Decision, we adopt Petitioner’s definition of a POSITA.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“According to Petitioner, claim 1’s recitation of “at an angle” in the context of “at least a pair of integral multi-faceted side walls that extend from opposite sides of the base member at an angle” should be construed as “at a same angle.” Pet. 9. According to Petitioner, “at an angle” only has meaning if it modifies both side walls and, thus, is the same angle. Id. Petitioner also cites the ’881 patent’s embodiments where the side walls extend from a base at the same angle. Id. (citing Ex. 1001, Figs. 16–20, 25). Patent Owner contends that the article “a” or “an” means “one or more” and that the plain language of the claim does not depart from that general rule to limit “a” or “an” to mean “one.” Prelim. Resp. 11. Patent Owner also asserts that the ’881 patent’s disclosure does not rise to an express disclaimer of that ordinary meaning of “a” or “an.” Id. at 12–13. Because it is not necessary to construe this claim term to resolve the dispute between the parties with respect to institution of trial, we do not make any claim construction at this stage in the proceeding. See Nidec Motor Corp. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“knowledgeable and able to provide additional bends in Medendorp’s aluminum reflector to further direct the light emitted” and that Barr’s reflector design includes multi-faceted side walls, these facts alone are not enough to demonstrate that a POSITA would have been motivated to modify Medendorp’s reflector in the manner set forth in Petitioner’s challenge. Our reviewing court has held that merely asserting that references are drawn from the same field of art is “simply too conclusory” to show that a POSITA would have combined the references in the way of the claimed invention. Securus Techs., Inc. v. Glob. Tel*Link Corp., 701 F. App’x 971, 976 (Fed. Cir. 2017); see also Microsoft Corp. v. Enfish, LLC, 662 F. App’x 981, 990 (Fed. Cir. 2016) (determining that “the Board correctly concluded” that a petitioner “did not articulate a sufficient motivation to combine” where the only reason given was “that references were directed to the same art or same techniques.”). At most, the similarities between Medendorp and Baar establish, as a threshold matter, that they would have been considered by a POSITA. See K-Tec, Inc. v. Vita-Mix, Corp., 696 F.3d 1364, 1375 (Fed. Cir. 2012) (to qualify as prior art in an obviousness analysis, references must be analogous art—either in the same field of endeavor, or reasonably pertinent to the problem with which the inventor is involved). But the asserted similarities alone are not sufficient to show that a POSITA would have had a reason to combine the teachings in the manner described in the challenged claims. Personal Web Techs., LLC v. Apple, Inc., 848 F.3d 987, 994 (Fed. Cir. 2017) (It is not enough that a skilled artisan, once presented with two references, would have understood that they could be combined; Petitioner needs to establish a motivation to pick out the two references and combine them to arrive at the claimed invention.). Petitioner asserts that a POSITA would have been motivated to modify Medendorp’s reflector “to provide additional bends . . . to further direct the light emitted.” Pet. 32 (citing Ex. 1003 ¶ 230). Petitioner does not explain how modifying Medendorp’s reflector to include “additional bends” would improve directing the light emitted, when Medendorp already teaches that its reflector focuses and directs the LED’s emitted light. Id. Petitioner fails to provide any persuasive argument or evidence as to how replacing Medendorp’s reflector with Barr’s or retrofitting Barr’s fluorescent fixture with Medendorp’s LEDs would have provided any benefit to Medendorp’s LED fixture. According to Petitioner, “a POSITA would have understood Medendorp’s reflectors are merely exemplary and varying types and reflector shapes existed, but Petitioner fails to explain why Barr’s reflector in particular would be selected from among existing reflector shapes. See In re Schweickert, 676 F. App’x 988, 995 (Fed. Cir. 2017) (reversing Board’s obviousness determination where proposed modification of prior art is “unnecessary” to prior art system that “already” performs function of proposed additional feature and “would do little more than add unwanted cost and complexity to the system”).” slip op. at 23
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 8,322,881 - PTAB · May 3, 2023 · IPR2023-00125 · APJ Grace Karaffa Obermann · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of proving any challenged claim obvious over the asserted combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“IV. CONCLUSION For the above reasons, we determine that Petitioner has not shown a reasonable likelihood that it will prevail in showing that at least one of the challenged claims is unpatentable. Accordingly, we deny the Petition and do not institute an inter partes review. V. ORDER It is ORDERED that, pursuant to 35 U.S.C. § 314, the Petition is denied and no inter partes review is instituted.” slip op. at 24
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“that standard, the “words of a claim ‘are generally given their ordinary and customary meaning,’” which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention, i.e., as of the effective filing date of the patent application.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc) (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). We construe terms in dispute only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017); Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999). The parties dispute only the meaning of the claim phrase “at an angle.” Compare Pet. 12–13, with Prelim. Resp. 11–14. No express construction of this or any other claim term is necessary to this Decision.” slip op. at 8
- Skill levelSkill level petitioner adoptedDecided for petitioner
“factual determination that provides a primary guarantee of objectivity in an obviousness analysis. Al-Site Corp. v. VSI Int’l Inc., 174 F.3d 1308, 1324 (Fed. Cir. 1999) (citing Graham v. John Deere Co., 383 U.S. 1, 17–18 (1966); Ryko Mfg. Co. v. Nu-Star, Inc., 950 F.2d 714, 718 (Fed. Cir. 1991)). In Petitioner’s view, an ordinarily skilled artisan “would have at least a bachelor’s degree in a relevant scientific field, e.g., physics, materials science or engineering, or electrical engineering, and two or more years of experience in lighting design with LED fixtures for lighting applications.” Pet. 2–3 (citing Ex. 1003 ¶¶ 36–47). Patent Owner does not challenge Petitioner’s definition for purposes of this Decision. Prelim. Resp. 11. On this record, we determine that the level of ordinary skill in the art at the time of the invention is reflected adequately in the asserted prior art references. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). To the extent a more specific definition is required for purposes of this Decision, we adopt Petitioner’s unopposed definition, which is consistent with the disclosures of the asserted prior art.” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not found
“The critical question is not whether any ordinarily skilled artisan could have undertaken the proposed modification, but rather, whether Petitioner explains adequately why one would have done so. See Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (“obviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention”); see also Trivascular, Inc. v. Samuels, 812 F.3d 1056, 1066 (Fed. Cir. 2016) (“Although the KSR test is flexible, the Board ‘must still be careful not to allow hindsight reconstruction of references . . . without any explanation as to how or why the references would be combined to produce the claimed invention.’”) (quoting Kinetic Concepts, 688 F.3d at 1368). On that point, Petitioner submits, “Medendorp’s reflectors are merely exemplary” and other “varying reflector shapes” would have been known in the art. Pet. 55–56. From there, Petitioner argues that an ordinarily skilled artisan “could” retrofit Baar’s multi-faceted side walls to include Medendorp’s LED lighting system. Id. at 56–57. By way of support, Petitioner indicates, “It would have been an obvious design choice to use such a multi-faceted reflector in the Medendorp light assembly if a greater focus of light was desired. (cite).” Id. at 57. We detect the unmistakable taint of hindsight reconstruction in Petitioner’s argument, including the conclusory and ineffective reference to a “cite” not provided. Id.” slip op. at 18
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,699,854 - Vifor (International) AG v. Biofer S.P.A.Institution deniedPTAB · Apr 24, 2023 · IPR2022-01608 · APJ Grace Karaffa Obermann · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–16, 19–21, and 23–25 were unpatentable on any asserted ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“step of reacting a sugar with bromine occurs “in a solution at a pH between 7.0 and 9.0.” Ex. 1001, 16:46–47. A dispositive question arises, on this record, as to whether Petitioner’s information, directed to this pH range limitation, is sufficient to support institution of review. For reasons that follow, we determine that Petitioner’s information is not sufficient and deny the Petition on that basis.” slip op. at 9
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“and 12 and that Stoll suggests a pH range of 7 or greater. Pet. 29–30 and n.7, 39. Those prior art pH ranges overlap or encompass the specified pH range of “between 7.0 and 9.0.” Pet. 38–39 and n.10. Under these circumstances, the burden of production shifts to Patent Owner to come forward with evidence of the criticality of the specified pH range limitation. See id. at 39–40 (quoting E.I. DuPont de Nemours & Co. v. Synvina C.V., 904 F.3d 996, 1008 (Fed. Cir. 2018). Patent Owner meets that burden by directing us to the Marchi Declaration. Resp. 9–12; Ex. 1004, 432–440. That evidence contains experimental results that support Dr. Marchi’s opinion that the claimed method, when performed at a pH of 8, “can be run with equimolar amounts of oxidant without increasing depolymerization,” but when performed at a pH of 10, results in an undesirable “depolymerizing attack on the main chain, even employing only 0.9 equivalents of oxidant.” Ex. 1004, 434–435 (¶ 7). As Patent Owner points out, moreover, the oxidation reaction in each of the examples in Geisser is carried out at a pH of 10. see Prelim. Resp. 26 and n.8 (citing Ex. 1006, Examples 1–8).” slip op. at 10
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“We assess the ground based on anticipation by Geisser in view of the principle that a prior art reference anticipates a patent claim “if it discloses every claim limitation.” In re Montgomery, 677 F.3d 1375, 1379 (Fed. Cir. 2012). The ground based on anticipation by Geisser rests on a conclusory opinion that Geisser’s disclosure of a pH range between 8 and 12 “describes” an oxidation reaction that occurs “at a pH between 7.0 and 9.0.” Pet. 63 (citing Ex. 1002 ¶ 178, which repeats that conclusory opinion verbatim without objective evidence or analysis). It is unclear on this record, and Petitioner does not explain adequately, how or why Geisser anticipates the pH range limitation of claim 1, which is “critical” for reasons explained above in our analysis of the ground based on obviousness over Geisser and Stoll. Ex. 1004, 435 (the Marchi Declaration, ¶ 7). Accordingly, on this record, we determine that Petitioner does not establish a reasonable likelihood of prevailing “with respect to at least [one] of the claims” based on any ground asserted in the Petition. 35 U.S.C. § 314(a).” slip op. at 13
- Skill levelSkill level petitioner adoptedOther
“Petitioner proposes that an ordinarily skilled artisan “would hold an advanced degree, such as an M.S. or doctorate, in chemistry, medicine, pharmacy, or a related degree,” as well as post-graduate experience “in areas of carbohydrate chemistry, synthetic chemistry, medicinal chemistry, inorganic chemistry, and/or metal carbohydrate complexes, or the clinical use of such complexes.” Pet. 16. Patent Owner does not contest Petitioner’s proposed definition in the Preliminary Response. Prelim. Resp. 17–18. Based on the information presented, we find that the asserted prior art itself is sufficient to demonstrate the level of skill in the art at the time of the invention. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself can reflect the appropriate level of ordinary skill in the art). To the extent a more precise definition is required, we apply Petitioner’s unopposed proposed definition for purposes of determining whether to institute review because it is consistent with the disclosures of the asserted prior art references.” slip op. at 7
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,759,320 - Nespresso USA, Inc. v. K-Fee System GMHBInstitutedPTAB · Apr 14, 2023 · IPR2022-01574 · APJ James J Mayberry · IPR · Institution
The Board instituted IPR of claims 1–13, finding a reasonable likelihood that claim 1 is obvious over Yoakim, Jarisch ’929, and Rossi.
RulingsInstitution decision- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“earlier filed application only if the disclosure of the earlier application provides [written description] support for the claims of the later application, as required by 35 U.S.C. § 112.” PowerOasis, Inc. v. T-Mobile USA, Inc., 522 F.3d 1299, 1306 (Fed. Cir. 2008); see also In re NTP, Inc., 654 F.3d 1268, 1276 (Fed. Cir. 2011) (“[A] patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority. Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120.” (citations omitted)). The written-description inquiry is a question of fact, is context-specific, and must be determined on a case-by-case basis. Ariad banc). The test for sufficiency of support is whether the disclosure of the application relied upon “reasonably conveys to the artisan that the inventor had possession at that time of the later claimed subject matter.” Vas-Cath Inc. v. Mahurkar, 935 F.2d 1555, 1563 (Fed. Cir. 1991). “One shows that one is ‘in possession’ of the invention by describing the invention, with all its claimed limitations . . . .” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). We determine that Patent Owner has not demonstrated, at this stage of the proceeding, that the Challenged Claims are entitled to claim priority to the second German application, and, as such, Jarisch ’929 is prior art on the current record. We determine that Patent Owner has not sufficiently demonstrated that the second German application provides written description support for at least the identifier as recited in independent claims 1, 7, and 10. We determine, at this stage of the proceeding and on the current record, that the embodiment of Figures 16, 17, and 18 does not show an identifier with a repeat pattern on the bottom side of the flange as required by the claims. The disclosure of the second German application explains that the means 2.4.2 is a toothed ring, with the teeth formed in the outer circumference of the flange, not on the bottom of the flange. See, e.g., Ex. 1047, 41:17–27 (explaining that the annular peripheral region 2.4 has “in its outer region” means 2.4.2 (emphasis added)); id., Fig. 18 (showing that the outer edge of the flange interacts with pinion 24).” slip op. at 23
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art The level of skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). “This reference point prevents . . . factfinders from using their own insight or, worse yet, hindsight, to gauge obviousness.” Id. Factors pertinent to a determination of the level of ordinary skill in the art include: (1) educational level of the inventor; (2) type of problems encountered in the art; (3) prior art solutions to those problems; (4) rapidity with which innovations are made; (5) sophistication of the technology; and (6) educational level of workers active in the field. Env’t Designs, Ltd. v. Union Oil Co., 713 F.2d 693, 696–97 (Fed. Cir. 1983) (citing Orthopedic Equip. Co. v. All Orthopedic Appliances, Inc., 707 F.2d 1376, 1381–82 (Fed. Cir. 1983)). Not all such factors may be present in every case, and one or more of these or other factors may predominate in a particular case. Id. Moreover, these factors are not exhaustive but are merely a guide to determining the level of ordinary skill in the art. Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). In determining a level of ordinary skill, we also may look to the prior art, which may reflect an appropriate skill level. Okajima, 261 F.3d at 1355.” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“C. Claim Construction We construe each claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their ordinary and customary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1312–14 (Fed. Cir. 2005) (en banc) (“We have frequently stated that the words of a claim ‘are generally given their ordinary and customary meaning.’” (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed.Cir.1996)).” slip op. at 16
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“Yoakim, Jarisch ’929, and Rossi to arrive at the subject matter of the claims challenged in Ground 1. As an initial matter, Petitioner contends that Yoakim, Jarisch ’929, and Rossi are “analogous art in the field of portion 10 The U.S. patent statute precludes the type of multiple dependent claims appearing in the second German application. See 35 U.S.C. § 112(e) (2011) (“A claim in multiple dependent form shall contain a reference, in the alternative only, to more than one claim previously set forth and then specify a further limitation of the subject matter claimed. A multiple dependent claim shall not serve as a basis for any other multiple dependent claim.”). applied in automatic coffee/expresso machines.” Pet. 44 (referencing Ex. 1004 ¶¶ 2–3; Ex. 1006 ¶¶ 1–2; Ex. 1041, 1; Ex. 1003 ¶ 188); cf. In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004) (“References within the statutory terms of 35 U.S.C. § 102 qualify as prior art for an obviousness determination only when analogous to the claimed invention.”). Patent Owner does not dispute this contention.” slip op. at 27
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,254,491 - 3M Company v. Bay Materials, LLCInstitutedPTAB · Jan 18, 2023 · IPR2022-01215 · APJ Grace Karaffa Obermann · IPR · Institution
The Board instituted inter partes review of claims 1–4, 7, 11–14, 18, and 31 on all asserted grounds, finding at least one claim sufficiently shown anticipated by Yu.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“The Petition includes detailed arguments that map the limitations of the challenged claims to specific disclosures in Yu (Sample 1). Id. at 50–62. The Petition also maps adequately the limitations of the challenged claims to specific disclosures in Stewart (Example 2). Id. at 62–66. For example, Petitioner shows sufficiently that Yu (Example 1) coextrudes “a multilayered polymeric film,” that is, a “sheet,” arranged in the hard-soft-hard-soft-hard, five-layer configuration required by claim 11. Pet. 50–51; Ex. 1002 ¶¶ 124, 126–128; Ex. 1012 ¶¶ 63, 78, 92. Petitioner also shows sufficiently that the hard layers in that configuration of Yu (Example 1) are “hard” and the hard layers are “hard” within the meaning of claim 11. Pet. 53; Ex. 1002 ¶ 131; Ex. 1012 ¶ 78. In other words, Petitioner shows sufficiently, on this record, that Yu (Example 1) anticipates claim 11. Based on the information presented, we find that Petitioner shows sufficiently, for purposes of trial institution, that at least one challenged claim of the ’263 patent is anticipated by Yu (Sample 1).” slip op. at 12
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“That prior art disclosure of elastomeric materials for use as the outer layers in an unclaimed and disfavored soft-hard-soft layer configuration does not convey, with reasonable clarity, that the inventors had possession of the claimed subject matter, in which the elastomeric material forms the inner layer of a polymeric sheet in a hard-soft-hard layer configuration. See id. ¶¶ 7, 33–35, 109–110. Even if the hardness limitation of the challenged claims would have been obvious from the relied-upon disclosure of the ’176 application (Ex. 2001 ¶ 109), that circumstance is insufficient to establish written description support. “Entitlement to a filing date does not extend to subject matter which is not disclosed, but would be obvious over what is expressly disclosed.” PowerOasis, Inc. v. T-Mobile USA, Inc., 522 F.3d 1299, 1306 (Fed. Cir. 2008) (quotations omitted); see Pet. 21 (quoting that precedent). Accordingly, we agree with Petitioner that the invention that Patent Owner seeks to protect in the ’263 patent does not appear to be “part of the invention” described in the ’176 application. Pet. 40; see Ex. 2001 ¶ 109 (describing elastomeric materials, having the specified hardness, only in the context of an unclaimed prior art soft-hard-soft embodiment). On this record, we preliminarily agree with Petitioner that the earliest effective filing date to which the ’263 patent appears to be entitled is December 18, 2019, namely, the filing date of the ’256 application, from which the ’263 patent issued. Ex. 1001, codes (21), (22). Patent Owner may contest this issue in a timely response to the Petition.” slip op. at 9
- Skill levelNot reached
“The parties disagree about whether the ordinarily skilled artisan would have had specific “experience with dental appliances or access to individuals with such experience.” Prelim. Resp. 17; see Pet. 14–15 n.1 (disagreeing with that proposition). Neither party explains why a resolution of that Stat. 284 (September 16, 2011), includes revisions to Section 102(a) that became effective on March 16, 2013. For reasons explained in this Decision, on this record it appears Petitioner is correct that the challenged claims are entitled to an effective filing date no earlier than December 18, 2019 and, therefore, the AIA provisions apply in this proceeding. See Pet. 22, 39–40; Ex. 1001, code (60). 2 WO 20010/043419 A1, published Apr. 22, 2010, with English Translation (Ex. 1015). 3 We take notice that the first and second grounds identified in the Petition assert anticipation based on the same prior art disclosure. 4 US Pub. 2004/0224283 A1, published Nov. 11, 2004 (Ex. 1008). dispute is necessary to this Decision to institute review. See, e.g., Prelim. Resp. 17 n.2 (“even under Petitioner’s proposed definition, the Petition fails to show a reasonable likelihood that any claim is unpatentable”); Pet. 14–15 & n.1 (arguing about the issue without explaining how a resolution of the dispute would change the outcome of the decision on institution). If either party believes that the difference in level of skill would have a material effect on the analysis of the patentability of the challenged claims, that issue should be specifically addressed in briefing during the trial. We will resolve that dispute only to the extent necessary in any final written decision. Based on the information presented, we find that the asserted prior art itself is sufficient to demonstrate the level of skill in the art at the time of the invention. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed
“We construe terms in controversy only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). “Petitioner discusses the terms “layer A,” “layer B,” “layer C,” “layer C,” “layer B',” inner layer B,” “inner layer B',” and “inner layer D.” Pet. 15–20. Patent Owner discusses the terms “layer” and “inner.” Prelim. Resp. 19–22. Taking account of the information presented, we determine that no claim term requires express construction for purposes of deciding whether to institute review. Compare Pet. 15–20 (addressing issues of claim construction, without demonstrating that an express construction is necessary to resolve whether to institute review), with Prelim. Resp. 19–22 (same).” slip op. at 7
Claim construction§ 112 disclosurecites Phillips · GrahamPatents in suitUS 10,870,263 - 3M Company v. Bay Materials, LLCInstitutedPTAB · Jan 18, 2023 · IPR2022-01214 · APJ Grace Karaffa Obermann · IPR · Institution
Instituted IPR of claims 1–4, 7–11, and 13 on all asserted obviousness grounds, including grounds without Sun despite concerns about their sufficiency.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“6. Conclusions on the Sufficiency of Petitioner’s Information Petitioner shows sufficiently that the subject matter of at least one challenged claim would have been obvious based on the ground that asserts Sun. See Pet. 6 (Ground 3). We have concerns about the sufficiency of Petitioner’s showing with respect to the grounds that do not assert Sun. See id. (Grounds 1 and 2). We institute an inter partes review of all challenged claims based on all grounds asserted in the Petition. See SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1354, 1359–60 (2018); Patent Trial and Appeal Board Consolidated Trial Practice Guide (Nov. 2019)8 (“The Board will not institute on fewer than all claims or all challenges in a petition.”).” slip op. at 20
- Skill levelSkill level board ownOther
“The parties disagree about whether the ordinarily skilled artisan would have had specific “experience with dental appliances or access to individuals with such experience.” Prelim. Resp. 9; see Pet. 10–11 n.1 (disagreeing with that proposition). Neither party explains why a resolution of that dispute is necessary to this Decision to institute review. See, e.g., Prelim. Resp. 9 n.2 (“even under Petitioner’s proposed definition, the Petition fails to show a reasonable likelihood that any claim is unpatentable”); Pet. 14–15 & n.1 (arguing about the issue without explaining how a resolution of the dispute would change the outcome of the decision on institution). If either party believes that the difference in level of skill would have a material effect on 5 US Pub. 2004/0224283 A1, published Nov. 11, 2004 (Ex. 1008). the analysis of the patentability of the challenged claims, that issue should be specifically addressed in briefing during the trial. We will resolve that dispute only to the extent necessary in any final written decision. Based on the information presented, we find that the asserted prior art itself is sufficient to demonstrate the level of skill in the art at the time of the invention. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We construe terms in controversy only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner discusses certain terms at issue in the District Court action, such as “layer A,” “layer B,” “layer C,” “inner layer B,” and “flexural modulus” ranges, without proposing any express constructions. Pet. 12–15. Patent Owner does not provide arguments directed specifically to proposed claim constructions. See generally Prelim. Resp. Taking account of the information presented, we determine that no claim term requires express construction for purposes of deciding whether to institute review. Compare Pet. 12–15 (addressing issues of claim construction, without demonstrating that an express construction is necessary to resolve whether to institute review), with Prelim. Resp. 12–39 (addressing the merits of Petitioner’s challenges, without asserting an express claim construction).” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“We preliminarily find that Hinz would have alerted the ordinarily skilled artisan that the choice of “layer thicknesses” in a multilayer dental structure “ensure[s] very good mechanical properties.” Ex. 1002 ¶ 100; Ex. 1015, 4:116–119. Where Sun teaches that the flexural modulus of dental structures would have been recognized as one such mechanical property (id. ¶ 160; Ex. 1018 ¶ 12), we further accept, at this preliminary stage, that an ordinarily skilled artisan would have understood how variations “in the relative thicknesses of the respective layers” desirably impact the flexural modulus (id. ¶ 105). Furthermore, in view of Sun’s disclosure of advantages associated with dental structures having a preferred flexural modulus, and the fact that those exact same advantages expressly were of interest to Hinz, we are not persuaded by Patent Owner’s argument, on this record, that it makes a difference that Sun discusses two-layer structures, whereas Hinz discusses three-layer structures. Pet. 65–66 (citing Ex. 1002 ¶¶ 158–160; Ex. 1015, 3:74–76; Ex. 1018 ¶ 4); see Sur-reply 5 (Patent Owner, identifying distinctions without a difference in Sun). In other words, Sun’s teachings appear, on this record, to apply generally to multilayer dental structures, including the multilayer structures of Hinz. For the above reasons, although the issue is a close one, we find that Petitioner shows sufficiently for purposes of trial institution that the ordinarily skilled artisan would have had a reason, and possessed the technical acumen, to select combinations of layer thickness values, from among the ranges disclosed in Hinz, to attain a multilayer dental structure having a desirable flexural modulus, as suggested by Sun. Patent Owner may address that preliminary finding in a timely response to the Petition.” slip op. at 16
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 10,946,630 - Markforged Inc. v. Continuous Composites, Inc.Institution deniedPTAB · Jan 18, 2023 · IPR2022-01431 · APJ Sheldon M Mcgee · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–4 were unpatentable over the asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“III. ANALYSIS We have authority to institute an inter partes review only where “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Our findings and conclusions set forth in this Decision are provided for the exclusive purpose of explaining our determination that Petitioner has not met that standard on this record.” slip op. at 5
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“The question of whether the prior art references are in the same field of endeavor is merely a threshold issue that must be satisfied before an obviousness determination can be made. See K-Tec, Inc. v. Vita-Mix, Corp., 696 F.3d 1364, 1375 (Fed. Cir. 2012) (to qualify as prior art in an obviousness analysis, references must be analogous art—either in the same field of endeavor, or reasonably pertinent to the problem with which the inventor is involved). In other words, once it is determined that the prior art is analogous to the claimed invention, it is then necessary to show that it would have been obvious for the skilled artisan to select and combine the teachings of the prior art in the manner claimed. Thus, we agree with Patent Owner that the Petition needs to set forth specific reasoning as to why an ordinarily skilled artisan would have been motivated to combine these references even if they are in the same or similar fields. Prelim. Resp. 31. Petitioner fails to do so on this record. The absence of such reasoning is particularly noteworthy here in view of Ma’s numerous teachings which appear to discredit the “passive” method of pulling the composite strand from the extruder as recited in claim 4, which is challenged in each of Grounds 2 and 3. Patent Owner identifies no fewer than eight disclosures within Ma that seemingly disparage the passive “pulling” method and discuss benefits of the active “pushing” method. Prelim. Resp. 16–19 (citing Ex. 1007, 53, 95–96, 98–107, 143–147, 149, 167–168). In the absence of any explanation from Petitioner on this point, we are not persuaded that the skilled artisan would have ignored those teachings and selected Ma’s pulling method.” slip op. at 19
- Expert testimonyPetitioner expert discountedDecided for patent owner
“explained why the ordinarily skilled artisan would have combined the non-precoating embodiment of Lipsker’s Figure 2 and the precoating embodiment of Lipsker’s Figure 5, much less with a reasonable expectation of successfully arriving at the subject matter of challenged claims 1–3. Prelim. Resp. 22–23. As Patent Owner correctly observes (id.), Petitioner’s general assertion that “Lipsker discloses that combinations of disclosed embodiments and features are possible and proper” (Pet. 20) does not constitute a reasoned explanation regarding why the skilled artisan would have combined Lipsker’s precoating and non-precoating actuator embodiments to arrive at the claimed subject matter. Moreover, Dr. Rosen’s declaration testimony on this point is entitled to little to no weight as it merely parrots the Petition. Compare Pet. 20, with Ex. 1002 ¶ 69. 37 C.F.R. § 42.65(a).” slip op. at 14
- Skill levelSkill level petitioner adoptedDecided for petitioner
“On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). A more specific definition is not necessary for purposes of deciding whether to institute review. To the extent a more specific definition is required, however, we adopt Petitioner’s proposed definition because, on this record, it is consistent with the disclosures of the asserted prior art references. In any event, for the reasons explained below, even under Petitioner’s definition, Petitioner fails to establish a reasonable likelihood of prevailing at trial with respect to any challenged claim based on the grounds of unpatentability advanced in the Petition.” slip op. at 9
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 11,173,660 - Markforged Inc. v. Continuous Composites, Inc.Institution deniedPTAB · Jan 11, 2023 · IPR2022-01218 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of prevailing on any challenged claim, including because Ma taught against pulling, combinations lacked adequate motivation, and Wohrl did not disclose the claimed …
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2021). For the reasons discussed below, we deny the Petition and do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level board ownOther
“Petitioner contends that a person having ordinary skill in the art (“POSITA”) would have had “a master’s degree in mechanical engineering, materials science, or a related degree, and at least 3–5 years of experience in composite materials or additive manufacturing,” or a bachelor’s degree in the same fields and at least 5–6 years of experience. Pet. 12–13 (citing Ex. 1002 ¶ 36). Patent Owner states that it “does not agree that Petitioner’s proposed level of skill in the art accurately reflects the level of ordinary skill in the art as of the priority date . . . . Regardless of what level of skill is applied, however, the Petition does not show a reasonable likelihood to prevail.” Prelim. Resp. 3. Patent Owner does not propose a different level of skill in the art at this stage of the proceeding. See id. at 3–4 (“Patent Owner reserves the right to propose a level of ordinary skill in the art in this proceeding should it be instituted, or in other proceedings.”). On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). A more specific definition is not necessary for purposes of deciding whether to institute review.” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner asserts that the “claim terms should be given their plain and ordinary meaning because, to the extent certain claim terms are subject to multiple interpretations, those questions do not affect the grounds advanced here.” Pet. 13 (footnote omitted). Patent Owner does not address claim construction at this stage of the proceeding. See generally Prelim. Resp. We determine that no claim term requires express construction for purposes of this Decision.” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayNot shown unpatentableMotivation not foundNot shown unpatentable
“Ma distinguishes between these two methods, noting that with the “active” method, “the forming quality of a previous layer does not influence the forming of the current layer,” while with the “passive” method, “the quality of a previous layer has a profound effect on the forming quality of the current layer.” Ex. 1007, 53. Ma sets forth other problems with using the “passive” method. See, e.g., id. at 95–96, 98–107, 143, 145–147, 149. For example, Ma teaches that during deposition using the “passive” method, “it is possible to make a big error, especially when the nozzle makes a big-angle turn” (id. at 98), and that “[a] toolpath error could be generated if an anchoring point is not formed properly” when using the “passive” method (id. at 143). Ma also discloses that forming speed is an issue with the “passive” method, (id. at 146), but discloses “[o]ne of the advantages [of the ‘active’ method] is that the forming speed is not limited by the solidification condition of the towpreg during the forming process” (id. at 168). 2. Analysis Claim 1 recites, inter alia, “moving the nozzle away from the anchor during discharging to pull the path of the composite material out of the nozzle.” Ex. 1001, 10:61–63. Petitioner contends that Ma teaches this limitation because “Ma discloses that ‘when the object moves relative to the nozzle during the forming process, the towpreg is pulled out by the object instead of being pushed out by nozzle pressure” and “the anchor points are used to pull the towpreg (‘the path of the composite material’) out of the nozzle during discharging.” Pet. 33 (citing Ex. 1007, 38, 72)(emphasis omitted). controlled layer manufacturing: an “active” method that pushes the composite material from an extruder’s orifice, and a self-anchoring or “passive” method, wherein the composite material is pulled out by the object. Ex. 1007, 7–8, 52–54. Here, Petitioner relies on Ma’s disclosures relating to the passive method. Petitioner, however, fails to provide a persuasive explanation as to why a POSITA would have selected Ma’s passive pulling method over Ma’s active pushing method for further development or improvement. Petitioner’s failure to do so is particularly noteworthy here, because Ma includes numerous teachings against the passive method of pulling the composite material through the nozzle. Indeed, Patent Owner identifies no fewer than eight disclosures within Ma that seemingly disparage the passive pulling method and discuss the benefits of the active pushing method. Prelim. Resp. 7–10 (citing Ex. 1007, 53, 95– 96, 98–107, 143–147, 149, 167–168). We also agree with Patent Owner that Petitioner has not sufficiently explained why the ordinarily skilled artisan would have combined Ma’s active and passive methods, much less with a reasonable expectation of successfully arriving at the subject matter of claim 1. Id. at 11–14. In the absence of any explanation from Petitioner, we are not persuaded that a POSITA would have ignored Ma’s teachings against the passive pulling method and selected Ma’s pulling method over Ma’s active pushing method for further development and improvement. Accordingly, Petitioner has not demonstrated a reasonable likelihood that claim 1 would have been obvious over Ma.” slip op. at 8
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 9,987,798 - Nanofiber Solutions, LLC v. Acera Surgical, Inc.Some claims unpatentablePTAB · Dec 13, 2022 · IPR2021-01016 · APJ Christopher L Crumbley · IPR · Final written decision
Claims 1, 2, 4–7, and 13 are unpatentable: claims 1, 2, 4, 5, and 13 as anticipated by Johnson, and claims 6 and 7 as obvious over Johnson and Johnson–Liu, respectively.
RulingsFinal written decision- Skill levelOther
“Petitioner contends that: A person of ordinary skill in the art (“POSITA”) at the time of filing the ‘228 Patent would have been a person having a bachelor's degree in science or engineering, for example in the fields of chemistry, chemical engineering, or biomedical engineering, with undergraduate research experience, coupled with at least three years of industry experience, that linked the fabrication of fibrous polymeric materials to performance requirements for scaffolds for the promotion of proliferation of biological cells and the growth and/or reconstruction of biological tissues. Pet. 11–12 (citing Ex. 1002 ¶¶ 112–116). In response, Patent Owner notes that all challenged claims recite electrospun fibers but that Petitioner’s proposed level of skill “requires (1) no coursework, training or experience with electrospinning and (2) improperly focuses on scaffolds for the promotion of proliferation of biological cells and the growth and/or reconstruction of biological tissues.” PO Resp. 7 (citing Ex. 2001, ¶¶ 38–39). But Patent Owner then concedes that this “difference is immaterial to deciding the issues raised by the Petition.” Id. at 8.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“construe claims “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b), including construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b); see Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). Furthermore, we expressly construe the claims only to the extent necessary to resolve the parties’ dispute. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). The parties agree that the terms of the challenged claims should be given their “plain and ordinary meaning” and that no express claim construction is necessary to address Petitioner’s challenges. Pet. 12; PO Resp. 6. We agree that no claim terms require express construction for purposes of resolving the dispute between the parties.” slip op. at 10
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed
“Upon review, we are unpersuaded that Petitioner has improperly mixed and matched disclosures from Johnson to arrive at an anticipatory reference. Patent Owner is correct that Petitioner primarily relies on Example 1 as evidence for the method by which its scaffold is made. But the disclosure found in paragraph 98 is not a “distinct” teaching of the type described in Net MoneyIN; rather, it is a general description of the structures that may be created by Johnson’s method: “A scaffold may comprise any number of layers, including about 1 layer, about 2 layers, about 3 layers, about 4 layers, about 5 layers, and so on.” Ex. 1009 ¶ 98. Patent Owner has not directed us to anything in the disclosure of Johnson that indicates that this is a “distinct” teaching or embodiment, instead of a general description of the types of scaffolds that Johnson encompasses. We see no reason why the general disclosures regarding Johnson’s scaffolds should be limited to specific embodiments, or precluded from applying to the method of Example 1.” slip op. at 14
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureNot shown unpatentableNot shown unpatentable
“We are unconvinced by Petitioner’s arguments and evidence. While we recognize that the range of claim 3 is very broad, and it is possible that scaffolds having fiber diameters as set forth in Johnson could have a mean pore size falling within the range, inherency “may not be established by probabilities or possibilities.” Par Pharm., Inc. v. Twi Pharms., Inc., 773 F.3d 1186, 1196 (Fed. Cir. 2014). Nor does Petitioner sufficiently explain why a person of ordinary skill in the art would have understood the process of Example 1 to necessarily result in the claimed mean pore size. We are also persuaded by Patent Owner’s argument that Boland 2005’s disclosure of a fiber diameter similar to Johnson’s that nevertheless falls outside the claimed mean pore size range. We note that Petitioner never addresses Boland 2005 in its Reply. 4. Conclusion as to Anticipation For these reasons, we find that Petitioner has met its burden of showing that claims 1, 2, 4, 5, and 13 are anticipated by Johnson, but has failed to meet its burden as to claim 3.” slip op. at 18
Patent outcomesUS 10,632,228 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 10,632,228 - Hanwha Solutions Corporation / Hanwha Q Cells USA, Inc. v. Rec Solar Pte. Ltd.No claims unpatentablePTAB · Dec 9, 2022 · IPR2021-00989 · APJ Brian D Range · IPR · Final written decision
Claims 1–6, 11, and 13 were not shown unpatentable under either obviousness ground because Petitioner did not establish a motivation to combine Yagiura and Shimasaki.
RulingsFinal written decision- ExcludeMotion to exclude, deniedDenied
“Petitioner’s position is persuasive. We agree that documents from the Japanese Patent Office are self-authenticating official government documents. The technical issues regarding missing pages in the originally filed version of the document do not cause us to question authenticity. We also agree that Petitioner uses the documents to establish what the documents teach rather than establishing the truth of what the documents teach. In Reply, Patent Owner argues that Petitioner relies on the date printed on the document to prove up the truth of when the document was published. Mot. Excl. Reply 1–2. To the extent this is the case, an exception to hearsay applies because the document is a record of a public office. Fed. R. Evid. 803(8)(B) (a record of public office is an exception to the hearsay rule if the opponent does not show that the source of information or other circumstances “indicate a lack of trustworthiness”). Here, Patent Owner does not persuasively demonstrate a lack of trustworthiness; Patent Owner does not identify any substantively meaningful distinction in the missing pages of the originally filed document and does not identify any evidence to suggest that the missing pages were anything more than a harmless clerical error. For the reasons above, Patent Owner’s motion to exclude is denied with respect to these documents. B.” slip op. at 8
- Skill levelSkill level board ownOther
“Petitioner’s proposal is too broad. PO Resp. 8. For example, a person who merely installs solar panels for three years (satisfying “professional experience in solar energy”) while having some familiarity with module manufacturing would not be of ordinary skill in the design aspects of the ’060 patent as, for example, reflected by the claims at issue and the ’060 patent’s text and figures. See, e.g., Ex. 1101, Figs. 2a, 2b, 3a, 3b, 4a, 4b, 3:22–7:44. On the other hand, we also determine that Patent Owner’s proposal is too narrow. A person could, for example, have ordinary skill in the art of the ’060 patent by virtue of non-professional experience (for example, academic experience). When assessing relevant experience, research work done for a university (beyond mere classroom study) would have been just as valuable as research work done for a corporation. Also, ordinary skill in the art could be demonstrated by work that requires understanding of the ’060 patent’s field even if not “designing, developing, and/or researching” in the field itself We, thus, determine that a person of ordinary skill in the art of the ’060 patent would have been someone with a bachelor’s degree in electrical engineering, applied physics, or the like, and at least two years of (a) experience designing, developing, and/or researching in the field or (b) experience in solar energy that required an understanding of the ’060 patent’s field. Alternatively, that person would have had an advanced degree in electrical engineering, applied physics, or the like and at least one year of” slip op. at 11
- Expert testimonyPetitioner expert creditedDecided for petitioner
“qualifies as evidence in this matter. The Federal Circuit has held that expert testimony about the perspective of person of ordinary skill in the art (as Dr. Kimball provides here) must come from a person having at least ordinary skill in the art. Kyocera Senco Indus. Tools, Inc. v. ITC, 22 F.4th 1369, 1376–78 (Fed. Cir. 2022) (quoting Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362, 1364–65 (Fed. Cir. 2008)) (holding that ITC Administrative Law Judge abused discretion by admitting expert testimony of witness who lacked the experience of a person having ordinary skill in the art); see Mot. Excl. 6–7 (arguing this point). Patent Owner, however, cites no authority that expert testimony on such matters come from a person having ordinary skill in the art at the time of the invention. Cf. Scentair Tech., LLC v. Prolitiec Inc., IPR2021-00012, Paper 22 at 61 (PTAB Apr. 22, 2022) (similarly noting a party’s lack of authority on this point). Beyond needing to come from a person of ordinary skill in the art, expert testimony is admissible if the expert has the “scientific, technical, or other specialized knowledge [that] will help the trier of fact to understand the evidence or to determine a fact in issue.” Fed. R. Evid. 702. Furthermore, “[t]here is … no requirement of a perfect match between the expert’s experience and the relevant field.” USPTO, Patent Trial and Appeal Board Consolidated Trial Practice Guide, 34 (Nov. 2019). Here, Petitioner adequately establishes that Dr. Kimball qualifies as a” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“The Petition argues that all claim terms should be given their plain and ordinary meaning. Pet. 18. Patent Owner does not dispute this. PO Resp. 13. We determine that no claim term requires express construction for purposes of this Final Written Decision. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Matal, 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms that are in controversy, and only to the” slip op. at 15
Patent outcomesUS 10,749,060 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 10,749,060
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.