- PTAB · Jul 14, 2025 · IPR2025-00152 · APJ Mitchell G Weatherly · IPR · Institution
The Board instituted IPR of claims 1–17 on all asserted grounds after finding a reasonable likelihood that claims 1, 6, and 11 are obvious over Sutardja, Donnelly, and Letendre.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Preliminary Response. Paper 6 (“Prelim. Resp.”). Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record,1 we conclude that Petitioner is reasonably likely to prevail with respect to at least one of the challenged claims.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Petitioner contends that an ordinarily skilled artisan would have been motivated to incorporate Donnelly’s GUI into Sutardja’s display to more easily and conveniently communicate Sutardja’s state of charge information to a user in a graphical format. Id. at 35 (citing Ex. 1011 ¶ 242; Ex. 1003 ¶¶ 157–159. Petitioner also argues that an ordinarily skilled artisan would have found it obvious to combine Donnelly’s GUI depicting a bar graph indicating the charged and uncharged capacity of a vehicle battery into Sutardja according to well-known methods that would have yielded predictable results. Pet. 36 (citing Ex. 1003 ¶ 160). Petitioner also contends that an ordinarily skilled artisan would have reasonably expected to successfully combine Donnelly’s GUI as it relates to the state of charge into Sutardja’s vehicle, which already processed information about the state of charge of its battery and included a display showing charging parameters. Id. (citing Ex. 1011 ¶¶ 242, 243, Ex. 1003 ¶ 161).” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“includes “at least” a bar graph as shown in Figure 7. Id. at 4. Patent Owner argues that Petitioner’s “proposed construction should be rejected” because it “would wrongly import embodiments from the specification.” Prelim. Resp. 20–21. Patent Owner also contends that an ordinarily skilled artisan would recognize that the “unitary charge indicator is not limited to a bar graph representation.” Id. at 21. We discern no dispute over the meaning of “unitary vehicle charge indicator” because Petitioner does not argue that the term is “limited” to the embodiment shown in Figure 7, only that the term “at least includes” that embodiment. Patent Owner does not contend otherwise.” slip op. at 8
- Strike new argumentDecided for petitioner
“Patent Owner argues that Petitioner violates Rule 42.6(a)(3) by impermissibly incorporating arguments from Mr. Andrews’s Declaration into the Petition to avoid the word count limit. Prelim. Resp. 46–49. Patent Owner contends that the Andrews declaration is “over 140 pages” with a substantive portion containing “multiples of the allotted 14000 words” to a petition. Id. at 47. Patent Owner contends that “the only way to potentially understand the Petitioner’s proposed unpatentability challenges is to wade through the extraneous pages cited within the Andrews Declaration.” Id. Patent Owner also complains that Andrews supports his testimony relating to Petitioner’s first challenge by citing “many additional references in addition to references actually ‘relied upon’ by Petitioner.” Id. at 47–48. We discern no violation of Rule 42.6(a)(3). To the contrary, that Mr. Andrews’s supports his extensive explanations of his opinions with citations to dozens of pieces of objective evidence, is a feature, not a bug of his testimony. Mr. Andrews, and Petitioner by extension, leave virtually none of the substance of his testimony unsupported by objective evidence, a practice that we applaud.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,990,788 - PTAB · Jul 10, 2025 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board instituted review of claims 1–17 on all asserted grounds, finding a reasonable likelihood of unpatentability on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2023). For the reasons discussed below, we determine that Petitioner establishes a reasonable likelihood of prevailing with respect to the patentability of at least one claim of the ’562 patent. Accordingly, we institute an inter partes review of claims 1–17 of the ’562 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“(“POSITA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Neither party proposes any explicit construction of any term. See Pet. 7 (“For the purposes of this IPR, the plain meaning of each term can be applied.”). We do not expressly construe any term for purposes of this Decision.” slip op. at 7
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“On this record, we are persuaded that Petitioner adequately establishes that Usui discloses all of the limitations of claim 1. Usui discloses that aluminum or aluminum alloy layer 15 is in electrical contact with titanium underlayer 13, and titanium nitride layer 14 is located “intermediate the [titanium underlayer] 13 and the aluminum or aluminum alloy layer 15” to prevent “reaction between the aluminum layer 15 and underlayer 13.” Ex. 1004, 3:27–29, 3:38–41, 3:58–63. Usui further discloses that “a capping layer is provided above layer 15,” and that “[p]referred capping layers are titanium nitride and combinations of as layer 18 of a group IVA metal, preferably titanium with a titanium nitride layer 19.” Id. at 3:67–4:6. Usui teaches that titanium nitride layer 19 is about 150 to 800 Å thick, and that the thickness of titanium underlayer 13 is between about 90 to 110 Å. Id. at 3:31–33, 4:6–8. Usui also teaches that the interconnect metallurgy structures described therein “exhibit[] enhanced electromigration characteristics” and “are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.” Id. at 1:8–14. Usui’s description of a plurality of metal layers (layers 13–18) and a capping layer formed over the plurality of metal layers (layer 19), along with its description of the structure’s usefulness for forming electrical connections in an integrated circuit structure, is sufficient, on this record, to establish that Usui discloses “an electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. Usui’s teaching that the capping layer is a refractory metal nitride (titanium nitride) that has a thickness (150–800 Å) greater than the bottommost layer of the plurality of metal layers (layer 13, 90–110 Å), sufficiently establishes, on this record, that Usui discloses the “said capping layer consisting only of a refractory metal nitride, said refractory metal nitride forming a top of said electrical contact and having a thickness greater than that of a bottommost layer of said plurality of metal layers” limitation of claim 1.” slip op. at 11
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 8,686,562 - PTAB · Jul 9, 2025 · IPR2025-00094 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted IPR on claims 1–16 and all asserted grounds, finding a reasonable likelihood that claim 1 is obvious over Bonn and Mizuta.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this preliminary stage, we determine whether the information presented shows a reasonable likelihood that Petitioner would prevail in establishing that at least one of the challenged claims would have been unpatentable over the proposed prior art. We analyze the asserted grounds with the above-noted principles in mind.” slip op. at 7
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 5 (citing Ex. 1003 ¶¶ 67–69). Petitioner also argues that “[a]dditional education could substitute for professional experience and vice versa.” Id. On the present record, Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. Prelim. Resp. 1–52. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears to be consistent with the ’003 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We apply the same claim-construction standard used in the federal courts—in other words, the claim-construction standard that would be used to construe the claim in a civil action under 35 U.S.C. § 282(b), which is articulated in Phillips. See 37 C.F.R. § 42.100(b). Under the Phillips standard, the “words of a claim ‘are generally given their ordinary and customary meaning,’” which “is the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention, i.e., as of the effective filing date of the patent application.” Phillips, 415 F.3d at 1312–13. Neither party proposes construing any claim terms. Pet. 6; Prelim. Resp. 1–52. On the present record, we agree. As discussed below, we are able to determine whether to institute inter partes review of the ’003 patent without expressly construing any terms. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Patent Owner argues that Petitioner does not show sufficiently that a person of ordinary skill in the art would have had a reason to modify Bonn to remove local oscillator 55. Prelim. Resp. 13–15. We disagree. Petitioner argues that, “[i]n addition to using Figure 7’s ‘dual gate FET structure in high frequency signal mixing’ applications . . . , Bonn discloses using this dual gate FET in ‘other applications such as high frequency signal amplification.’” Pet. 22 (quoting Ex. 1006, 11:26–37). Indeed, Bonn does suggest using its structure for signal amplification. Ex. 1006, 11:26–37 (“the dual gate FET structure of the present invention can be tailored to provide superior performance . . . in . . . other applications such as high frequency signal amplification”). On the present record, this appears to have provided the motivation for a person of ordinary skill in the art to use Bonn for amplification instead of for signal mixing. Petitioner relies on the testimony of Dr. Bernstein to show the modifications that a person of ordinary skill in the art would have considered necessary in order to convert Bonn’s structure for signal-amplification use. Pet. 23–25 (citing Ex. 1003 ¶¶ 98–109). In particular, Petitioner cites Dr. Bernstein’s testimony that a person of ordinary skill in the art “would have found it obvious to remove Figure 1’s LO (local oscillator) port 55 and its associated impedance matching components because the LO signal is no longer being mixed.” Ex. 1003 ¶ 98; see Pet. 23. Dr. Bernstein supports this testimony with citations to Bonn and with reasoning regarding why a person of ordinary skill in the art would have made this modification. Ex. 1003 ¶ 98 (citing Ex. 1006, 1:20–23, 3:19–21, 3:30–41). Accordingly, on the present record, we are persuaded that Petitioner has shown sufficiently that a person of ordinary skill in the art would have had reason to modify Bonn’s structure to remove the connection between a local oscillator and the gate of the second transistor. Finally, Patent Owner argues that Petitioner’s proposed modification would have rendered Bonn inoperable for its intended purpose because the modification would eliminate the ability of Bonn’s structure to conduct high frequency signal mixing. Prelim. Resp. 26–27. As Patent Owner notes, one purpose of Bonn is to mix high-frequency signals. Ex. 1006, 11:33–36. But Bonn itself teaches using its structure for “other applications,” including “high frequency signal amplification.” Id. at 11:33–37. Thus, on the present record, we are persuaded that Petitioner’s proposed modification does not render Bonn inoperable for its intended purpose so much as it acknowledges the modifications necessary to convert Bonn from one of its intended purposes to another. Thus, Petitioner has shown sufficiently for the purpose of the present Decision that a person of ordinary skill in the art would have had reason to combine Bonn and Mizuta and that the combination of Bonn and Mizuta teaches or suggests the disputed limitation of claim 1. We encourage the parties to develop the arguments and the record surrounding this issue further during the trial.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,264,003 - Apple Inc. v. THL Holding Company, LLCAll claims unpatentablePTAB · Jul 3, 2025 · IPR2024-00398 · APJ Sheila F Mcshane · IPR · Final written decision
Claims 1–9 are unpatentable as obvious: claims 1, 4, 7, and 8 over Kalliola and Vauclair; claims 2, 3, and 6 with Kalayjian; claim 5 with Turunen; and claim 9 with Trimble.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner agrees with the qualifications proposed by Petitioner: “this description reasonably represents the level of ordinary skill necessary to understand and implement the teachings of the ’680 Patent, as well as the prior art cited in this proceeding.” PO Resp. 13–14 (citing Ex. 2002 ¶ 22). For the purposes of this Decision, we adopt the assessment offered by Petitioner as it is consistent with the ’680 patent and the prior art before us. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner
“Petitioner proposes that, based on Patent Owner’s proposed construction in the parallel litigation, we construe “pairing signal” as “[p]rocessor signal to initiate a wireless device pairing sequence.” Pet. 6 (quoting Ex. 1009, 15–168). In Response, Patent Owner adopts Petitioner’s interpretation of this term. PO Resp. 14. We adopt the parties’ proposed construction for this term. We determine that we need not construe any other claim terms. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 15
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“Second, Petitioner demonstrates that the combination of Kalliola and Vauclair teaches claim limitations 1(d)(iv) and 1(d)(v). As discussed and cited to above, the Petition identifies that, with Kalliola’s touch screen as the claimed “touch screen,” Kalliola’s processor presents a graphical user interface via its touch screen as set forth for limitation 1(c) and 1(d)(ii), and Kalliola’s processor operates in conjunction with its graphical user interface to perform claimed steps as set forth for limitation 1(d)(iii). See Pet. 20–29. We agree that the assertions are supported by Kalliola’s disclosure of a touch screen with a graphical user interface presented thereon, where “tactile elements” “allow the user . . . to enter data . . . into the device.” See Ex. 1004 ¶¶ 26, 40, 42, 44, 51, 71, Figs. 3, 5. Petitioner also asserts, and we agree, that Kalliola teaches the use of Bluetooth-enabled emitters in remote devices that communicate with its wireless communication device with a signal emitter. Pet. 29–31 (citing Ex. 104 ¶¶ 9, 71, 73–75, 77, 107, Fig. 5). Petitioner contends, and we agree, that Vauclair provides additional specificity regarding the pairing process between two devices with its disclosures of a pairing process between devices using protocols that include Bluetooth, wherein a user can select a pairing option from a menu on a display. Id. at 31–32 (citing Ex. 1005 ¶¶ 22, 24, 28, 30, 34–36, 49, Fig. 1; Ex. 1003 ¶¶ 164–167). Petitioner argues, and we agree, that it would have been obvious to a person of ordinary skill in the art to configure Kalliola to use its processor to present “a pairing menu to enable a user to initiate a Bluetooth pairing process between the WCD and the signal emitter by selecting a pairing option via the WCD’s touchscreen,” with Vauclair teaching at least the selection of a pairing option presented on its display, because the presented pairing menu on Kalliola’s touch screen would allow the user to pair the WCD with the user’s personal item signal emitters and would also allow the devices to recognize each other on subsequent connections. Id. at 34–35 (citing Ex. 1003 ¶ 172); see also Ex. 1005 ¶¶ 30, 36. Consequently, we also agree with Petitioner’s assertion that it would have been obvious to a person of skill of ordinary skill in the art that Kalliola’s graphical user interface on its touch screen would have generated signals corresponding to the user’s inputs at least to carry out designated functions, like the initiation of a pairing process, and “the signals generated by the GUI from interaction at the touchscreen would be sent to the WCD’s processor so that the processor can interpret the user’s inputs and take the appropriate action.” Pet. 35; see also Pet. Reply 2–7. Petitioner also asserts, and we agree, that generating processor signals in response to a user indication was a known mechanism for wireless devices, as were Bluetooth pairing and corresponding pairing menus, and there would be no change to the respective functions of Kalliola’s’ wireless communication devices and Vauclair’s pairing menu. Pet. 36 (citing Ex. 1003 ¶ 175). The Petition argues, and we agree, that because Bluetooth pairing and pairing menus were conventional prior to time of the invention, there would have been a reasonable expectation of success configuring Kalliola’s wireless communication device. Id. (citing Ex. 1003 ¶ 176); see also Ex. 1003 ¶¶ 71–75 (Dr. Buehrer providing evidence on Bluetooth-connected devices and associated pairing). Accordingly, we determine that Petitioner has provided sufficient evidence of rationale to combine Kalliola and Vauclair, a reasonable likelihood of success in the combination, and that the prior art teaches limitation 1(d)(iv). As to limitation 1(d)(v), we also agree with Petitioner that in response to a generation of a pairing signal as discussed in limitation 1(d)(iv), Vauclair discloses that wireless transceivers communicate a series of RF signals back and forth to pair the devices. Pet. 37–38. Petitioner asserts, and we agree, that, in combination, it would have been obvious to configure Kalliola’s Bluetooth transceiver with Vauclair’s teachings for the communication of RF signals to pair devices. Id. at 39. Petitioner contends, and we agree, that a person of ordinary skill in the art would have understood that Kalliola teaches that its wireless communication device performs Bluetooth communications with signal emitters, with the user selecting a desired signal emitter for locating objects, and that this pairing would also allow two Bluetooth devices to recognize each other on subsequent connections. Id. (Ex. 1003 ¶ 184). Petitioner asserts, and we agree, that applying Vauclair’s known technique of communicating RF signals to pair devices would improve Kalliola’s wireless communication device and yield the predictable result of Bluetooth-paired devices. Id. We also agree with Petitioner’s argument that this pairing was an understood and conventional feature of Bluetooth mobile communication devices, so there was a reasonable expectation of success in the combination. Id. at 40 (citing Ex. 1003 ¶ 186); see also Ex. 1003 ¶¶ 71–72 (Dr. Buehrer providing evidence on Bluetooth-connected devices). Accordingly, we find that Petitioner has provided sufficient evidence of rationale to combine Kalliola and Vauclair, reasonable likelihood of success in the combination, and that the prior art teaches limitation 1(d)(v).” slip op. at 40
- Strike new argumentNew argument consideredDecided for petitioner
“Ex. 1003 ¶ 172. The Petition also asserts that, in the combination, there would be no change to the respective functions of either Kalliola’s WCD or Vauclair’s pairing menu. Pet. 36. Thus, the Petition relies on Kalliola’s processor, and its touchscreen, and graphical user interface with Vauclair’s teachings for the pairing menu displayed, wherein pairing signals are generated by Kalliola’s graphical user interface by interaction with the screen. As we discuss further below, Petitioner includes assertions that Vauclair itself teaches that the pairing signal is generated by its graphical user interface. See id. at 33, 37. The Petition, however, also relies on the combination of Kalliola and Vauclair to teach generating a pairing signal by Kalliola’s graphical user interface by interaction with its screen, as discussed above. Id. at 35. Accordingly, it is not necessary to reach the issue of whether Vauclair alone teaches that its graphical user interface generates the pairing signal. Additionally, we do not find that Petitioner’s further arguments in its Reply concerning interaction with Kalliola’s wireless communication device through its graphical user interface were impermissibly presented in view of the Petition’s specific assertions on the teachings of the combination of Kalliola and Vauclair, as discussed above, and its reliance on user interaction with Kalliola’s graphical user interface for the teaching of generating the pairing signal. See 37 C.F.R. § 42.23(b).” slip op. at 39
Patent outcomesUS 11,265,680 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,265,680 - Apple Inc. v. THL Holding Company, LLCAll claims unpatentablePTAB · Jul 3, 2025 · IPR2024-00399 · APJ Christopher M Kaiser · IPR · Final written decision
Claims 11–19 are unpatentable as obvious: claims 11–14 over Kalliola, Turunen, Oswald, Vauclair, and Kalayjian; claims 15–18 with Thorn; and claim 19 with Thorn and Sharp.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that the level of ordinary skill in the art corresponds to “a bachelor’s degree in computer science, computer engineering, electrical engineering, or a similar technical field and 2-4 years of experience with wireless ranging and positioning systems, wireless communication devices, and associated computer programming.” Pet. 4 (citing Ex. 1003 ¶ 35). “Patent Owner agrees that this description reasonably represents the level of ordinary skill required to understand and implement the teachings of the ’246 Patent, as well as the prior art cited in the Petition.” PO Resp. 14 (citing Ex. 2002 ¶ 22). Accordingly, we adopt Petitioner’s proposed level of skill.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“device.” This term appears twice in claim 11, once in the phrase “an orientation sensor to detect rotation of the mobile communication device,” and once in the phrase “rotation of the mobile communication device detected by the orientation sensor.” Ex. 1001, 39:13–14, 39:36–38. Patent Owner argues that we should construe this term as limited to “detecting the rotation of the mobile communication device as a whole, not the movement of individual components.” PO Resp. 15–18. Petitioner disputes this, arguing that “rotation of the mobile communication device” should be construed not only to cover rotation of the device as a whole but also should “encompass[] any rotation of the mobile communication device relative to any object, including itself,” which would extend to rotation of “any component of the device.” Reply 4–5. We need not resolve this dispute to determine the outcome of Petitioner’s asserted challenges to the ’246 patent. As discussed more fully below, under either party’s proposed construction of “rotation of the mobile communication device,” Petitioner has shown by a preponderance of the evidence that the challenged claims are unpatentable. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Expert testimonyOther
“On the record developed during trial, we are persuaded that Petitioner has shown by a preponderance of the evidence that Kalliola teaches “an orientation sensor to detect rotation of the mobile communication device,” where “rotation of the mobile communication device” includes rotation of the device as a whole, regardless of whether it also includes rotation of one portion of the device relative to another. Kalliola teaches “motion sensors integrated in WCD 100” that are “used to detect when WCD 100 is being moved,” as well as to detect “when user 110 moves WCD 100 too quickly for an accurate DoA estimation.” Ex. 1004 ¶¶ 84, 86. Although Patent Owner argues that Kalliola’s motion sensors do not detect rotation of the device, this is incorrect on the record as developed at trial. Kalliola teaches that the motion sensor may take “the form of a semiconductor gyroscope chip.” Id. ¶ 84. There is ample evidence that gyroscopes detect rotation. Ex. 1013, 38 (identifying as an “orientation sensor” a “[t]hree-axis gyro” and a “[d]ynamic [h]igh [r]ange [gyro]”); Ex. 1046, 49:18–20 (Dr. Feuerstein testifying that gyroscopes “can be used to detect angular velocity”); Ex. 1047 ¶ 47 (citing Ex. 1051, 170; Ex. 1053, 9) (Dr. Buehrer testifying that a person of ordinary skill in the art “would understand that gyroscopes are well-known inertial sensors that specifically detect rotational motion”). Thus, by a preponderance of the evidence, Petitioner has shown that Kalliola teaches the “orientation sensor to detect rotation of the mobile communication device” of this limitation.” slip op. at 17
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“whether Kalliola’s teaching of pausing and resuming its DoA estimation based on detected rotational motion, or Kalliola’s teaching of speeding up its DoA estimation based on detected rotational motion, amounts to determining direction based on rotation. Pet. 63–64; PO Resp. 25–27; Reply 24–27; Sur-Reply 11–14. On the record developed during trial, we are persuaded that the preponderance of the evidence supports a finding that Kalliola teaches determining direction based on rotation. First, Kalliola discloses “pausing a DoA estimation until the motion of the WCD is detected by the motion sensors,” then resuming “the updating of the DoA estimation” when motion is detected. Ex. 1004 ¶¶ 14, 84. Second, Kalliola discloses a “correction or compensation mode” that is “employed when user 110 moves WCD 100 too quickly for an accurate DoA estimation,” with this “increase[d] speed of the DoA estimation” being triggered by the “[i]ncreased activity detected by motion sensors in WCD 100.” Id. ¶ 86. As discussed above with respect to limitation 11(d), the detected motion that triggers either of these modes can be rotational motion of the WCD detected by a gyroscope.” slip op. at 22
Patent outcomesUS 11,350,246 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,350,246 - PTAB · Jun 18, 2025 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted IPR on claims 1, 2, 5–7, 9, 16, and 17, finding a reasonable likelihood that claim 1 is anticipated by Boyer.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“approximately two weeks before the statutory deadline for a final written decision, but the most recent median time-to-trial statistics for Judge Gilstrap in the Eastern District of Texas indicate that the actual trial date will likely be in July 2026, which is later than the statutory deadline to issue a final written decision in this proceeding in mid-June 2026. See Ex. 2001, 7 (median time from filing to trial of 23.2 months); Prelim. Resp. 10. Thus, we find this factor is neutral or weighs slightly against discretionary denial.” slip op. at 10
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this preliminary stage, we determine whether the information presented shows a reasonable likelihood that Petitioner would prevail in establishing that at least one of the challenged claims would have been unpatentable over the proposed prior art. We analyze the asserted grounds with the above-noted principles in mind.” slip op. at 7
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears to be consistent with the ’713 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 16
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed
“We note that, as discussed below, we are able to determine whether to institute inter partes review of the ’713 patent without expressly construing the term “from multiple print heads or deposition lines.” See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). As for Patent Owner’s argument that Petitioner has failed to carry its burden to identify how the claims are to be construed, we disagree on the present record. Although Petitioner does not provide a preferred construction for the single term it proposes requires construction, Petitioner does identify which of its two alternative constructions applies to each of its asserted grounds of unpatentability. Pet. 6 (“Under the first construction, [the obviousness grounds] are applicable, and [the anticipation ground] would be excluded from the claim scope. Under the alternative construction, all of [the asserted grounds] are applicable.”). In our view, this approach does not fail to satisfy Petitioner’s burden under 37 U.S.C. § 42.104(b)(3).” slip op. at 17
Claim construction§ 102 anticipationDiscretionary denialcites PhillipsPatents in suitUS 9,421,713 - PTAB · Jun 18, 2025 · IPR2025-00311 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted IPR of claims 1, 3–11, and 17–22 on all asserted grounds because Petitioner showed a reasonable likelihood of prevailing on claim 1 over Mazumder and Mori.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“based on Petitioner’s first stipulation filed on December 18, 2024.15 Prelim. Resp. 13–15. Patent Owner does not address Petitioner’s updated second stipulation filed on April 8, 2025. This updated second stipulation mitigates any concerns of duplicative efforts between the district court and the Board, as well as concerns of any potentially conflicting decisions. See Sand at 12. We therefore find that this factor weighs against exercising discretion to deny institution. See id., n.5. 5. Whether Petitioner and the Defendant in the Parallel Proceeding are the Same Party Whereas Petitioner does not address factor 5, Patent Owner argues that the parties to this proceeding are both in the related district court litigation. Pet. 98–99; Prelim. Resp. 15. While it is common in IPR proceedings for the petitioner and patent owner to also be parties in a related district court proceeding, this factor weighs slightly in favor of discretionary denial. Fintiv, Paper 11 at 13–14.” slip op. at 15
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“c) Conclusion Regarding Claim 1 Based on the current record, we determine that there is a reasonable likelihood that Petitioner will prevail in demonstrating that claim 1 is unpatentable as obvious over the combination of Mazumder and Mori. Accordingly, we institute inter partes review with respect to all claims and all grounds asserted in the Petition. 5. Claims 3, 5–7, 9, 10, and 19–22 Because Petitioner demonstrates a reasonable likelihood of success in proving that at least one claim of the ’324 patent is unpatentable, we institute on all grounds and all claims raised in the Petition. See 37 C.F.R. § 42.108(a). Therefore, at this stage of the proceeding, it is not necessary for us to provide an assessment of every challenge raised by Petitioner, especially, as in this case, when Patent Owner does not separately argue those claims. See Prelim. Resp. 28–46. Those challenges, in our view, are best left for trial after full development of the record.” slip op. at 27
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“reference must be analogous art to the claimed invention. In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004). For a reference to be analogous art, it must be “either in the field of the applicant's endeavor or [be] reasonably pertinent to the problem with which the inventor was concerned.” In re Kahn, 441 F.3d 977, 986-87 (Fed. Cir. 2006) (citing In re Oetiker, 977 F.2d 1443, 1447 (Fed. Cir. 1992)). “A reference is reasonably pertinent if, even though it may be in a different field from that of the inventor's endeavor, it is one which, because of the matter with which it deals, logically would have commended itself to an inventor's attention in considering his problem.” In re Clay, 966 F.2d 656, 659 (Fed. Cir. 1992).” slip op. at 20
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Mazumder because “the presentation of both image types would have beneficially aided the remote user to more easily visually compare the actual image and virtual image to quickly identify any defects or problems with the fabrication process.” Pet. 23–24 (citing Ex. 1003 ¶ 113). Patent Owner argues that “it is hindsight to use ‘the invention to define the problem the invention solves.’” Prelim. Resp. 43 (quoting Mintz v. Dietz & Watson, Inc., 679 F.3d 1372, 1377 (Fed. Cir. 2012); citing AT&T Services Inc. et. al. v. Innovative Sonic Ltd., IPR2024-001143 (PTAB Feb. 11, 2025)). According to Patent Owner, because neither Mazumder nor Mori teaches visual comparison of image types, the idea to improve the Mazumder-Mori combination by simultaneously displaying different image types and thus permitting visual comparison must be driven by hindsight. Id. at 44–45. But Petitioner cites evidence other than the ’324 patent to support the person of ordinary skill in the art having a desire to visually compare the different images presented in the Mazumder-Mori combination. Pet. 23–24 (citing Ex. 1003 ¶ 113). Specifically, Dr. Wolfe testifies that “the presentation of the actual images captured by the camera and the virtual images simultaneously within the user interface would have beneficially aided the remote user to more easily visually compare the actual image and virtual image to quickly identify any defects or problems with the fabrication process” and that a person of ordinary skill in the art would have recognized this. Ex. 1003 ¶ 113. Thus, Petitioner has shown sufficiently for the purpose of the present decision that Mori teaches or suggests the disputed limitation of claim 1. We encourage the parties to develop the arguments and the record surrounding this issue further during the trial.” slip op. at 26
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 8,562,324 - PTAB · Jun 11, 2025 · IPR2025-00263 · APJ Barry L Grossman · IPR · Institution
Instituted IPR for claims 1–30 on all asserted grounds; the Board found a reasonable likelihood that claims would be unpatentable over Haley and Lai.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“III. CONCLUSION We have determined that there is a reasonable likelihood that Petitioner will prevail on at least one challenged claim. Accordingly, we institute an inter partes review on all challenged claims on each asserted ground. PGS Geophysical, 891 F.3d at 1360 (A decision to institute is a “yes-or-no institution choice respecting a petition, embracing all challenges included in the petition.”).” slip op. at 42
- BurdenInstituted
“limitations of clauses 1.3 and 1.4, but concedes that Haley does not disclose that its driver member has “at least one longitudinal edge with a plurality of spaced-apart protrusions,” as required by clause 1.4. Petitioner further asserts, however, that it would have been obvious “to replace Haley’s hydraulic lifter with the claimed ‘lifter,’ disclosed by [Lai]”. Pet. 13. (citing Ex. 1003 ¶ 54). Dr. Vallee’s cited Declaration testimony provides his opinion on this issue, which is consistent with Petitioner’s argument. Petitioner also asserts that “Lai discloses an electrically-powered, mechanical lifting mechanism with a structure that is essentially identical to the ‘lifter member’ disclosed in the ’776 patent. Pet. 13. Petitioner provides side-by-side colored figures from the ’776 patent and from Lai, reproduced below, to illustrate its argument. Pet. 14. According to Petitioner, the side-by-side comparison of Petitioner’s colored versions of Fig. 12, from the ’776 patent, with Petitioner’s colored versions of Figs. 4 A–D, reproduced above, illustrate why and how the proposed modification would have been obvious. As described by Petitioner, the “lifter member” of the ’776 patent includes a rotatable cam lifter 100 (yellow), with pins 104, 106, and 108 (green) on its face surface that engage protrusions 92 (blue) on the driver member 90 (orange). Pet. 13 (citing Ex. 1001, 9:30–46, 16:34–48, Fig. 12). Petitioner also cites the “two-pin variants: lifter members 465 and 480” shown in Figs. 31, 33 of the ’776 patent. Id. Petitioner also asserts that, as shown in the side-by-side comparison” slip op. at 33
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)No construction neededOther
“Petitioner asserts the term “lifter member” in the claims of the ’776 patent is “a means-plus-function term” because the claims “lack any ‘recital of structure, material, or acts in support thereof’ for the ‘lifter’ element.” Pet. 7 (citing 35 U.S.C. § 112(f)). Petitioner also asserts “[t]he Federal Circuit held that the term ‘lifter member’ in the related patents is a means-plus-function term subject to §112(f).” Pet. 7. Petitioner cites no authority for this assertion. We understand this assertion to refer to the decision in Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369 (Fed. Cir. 2022), identified by Petitioner as a related matter. Pet. 2. In this case, which involved patents from the same family as the ’776 patent (see Section I.C of this Decision), the Federal Circuit concluded that “§ 112 ¶ 6 applies to the ‘lifter member’ limitation, and it must be construed to cover only ‘the structure, materials, or acts described in the specification as corresponding to the claimed function and equivalents thereof.’” Id. at 22 F.4th 1379–1381. “Where multiple patents derive from the same parent application and share many common terms, we must interpret the claims consistently across all asserted patents.” Samsung Elecs. Co. v. Elm 3DS Innovations, LLC, 925 F.3d 1373, 1378 (Fed. Cir. 2019) (citing SightSound Techs., LLC v. Apple Inc., 809 F.3d 1307, 1316 (Fed. Cir. 2015) (internal quotation marks omitted). Patent Owner asserts that Petitioner: fails to comply with the requirement of 37 C.F.R. § 42.104(b)(3) to specifically identify the structure in the specification associated with that element. As ‘lifter’ is present in every challenged claim under all four grounds, Petitioner’s failure to provide a claim construction for ‘lifter’ is fatal to its Petition. Prelim. Resp. 13. We disagree. First, the claims in the ’776 patent do not use the single word “lifter” alone. The term used in some of the claims, see, e.g., independent claims 1 and 17, and the claims dependent from claims 1 or 17, is “lifter member.” We recognize that the written description in the ’776 patent states “the rotary-to-lifter 100 is also sometimes referred to herein as a ‘lifter member,’ or simply as a ‘lifter.’” Ex. 1001, 9:5–7. This suggests that that term “lifter” is intended to mean the “lifter member,” which makes the use of either term a distinction without a substantive difference. Moreover, neither independent claims 9 or 24, nor the claims dependent from claims 9 and 24, use the word “lifter” or “lifter member. Second, as stated in Petitioner’s Preliminary Reply, the Petition “identifies the portions of the specification that describe the corresponding structure for the ‘lifter’ when comparing its structure to that of the Lai prior art.” Prelim. Reply 1. The Petition provides a colored version of Figure 12 from the ’776 patent (reproduced below) and identifies the following corresponding structures from the Specification of the ’776 Patent: The “lifter member” of the ’776 patent includes a rotatable cam lifter 100 (yellow [ ]), with pin 104, 106, and 108 (green) on its face surface that engage protrusions 92 (blue) on the driver member 90 (orange). ’776 patent, 9:30–46, 16:34–48, Fig. 12. The ’776 patent also discloses two-pin variants: lifter members 465 and 480 in Figs. 31, 33. [citing] ’776 patent, 32:15–30, 32:48–63. Petition at 13. Based on the record before us, we determine that this identification of corresponding structure is sufficient to satisfy 37 C.F.R. § 42.104(b)(3). We also note that at this stage of the proceeding, Patent Owner does not dispute that Petitioner has identified the correct corresponding structure. To the extent the parties wish to further address the construction of this claim limitation, they may do so during trial, as permitted by our rules.” slip op. at 16
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“to mean “a chamber that is distinct from the displacement volume of the hollow cylinder and contains part of the working air volume during operation.” Pet. 8. According to Petitioner “there is nothing in the intrinsic record or any of the claims of the ’776 patent that prevents the ‘main storage chamber’ from being in the hollow cylinder, so long as it is distinct from its separately-recited ‘displacement volume.’” Id. at 9 (emphases added). Patent Owner asserts that “[g]rounds 2 and 4 each requires this Board to interpret the ‘storage chamber’ to be the same structure as the hollow cylinder.” Prelim. Resp. 31. According to Patent Owner, “[t]he Federal Circuit, considering both parties’ claim construction arguments, rejected that construction.” Id. Patent Owner does not provide any citation to support its reference to the Federal Circuit decision. It appears to be a reference to the Kyocera decision considering review of the ITC determination. See Kyocera, 22 F.4th at 1383. That decision, however, construed claims in a related patent to “require two distinct structures: the main storage volume and a smaller “hollow cylinder” contained within the main storage volume. Based on the record before us, Petitioner’s proposed construction is consistent with the Federal Circuit’s construction, which states two structures can be distinct even if one distinct structure is “contained within” the other distinct structure. Although the parties dispute the construction of the “storage chamber” claim limitation, this dispute relates only to Grounds 2 and 4. See Prelim. Resp. 31. We need not resolve it to determine whether to institute review. The parties are welcome to develop their arguments regarding this claim limitation during trial. 3. Conclusion Regarding Claim Construction Our claim construction analyses in this decision to institute a trial do not preclude the parties from arguing their proposed constructions of the claims during trial. Indeed, the parties are hereby given notice that claim construction, in general, is an issue to be addressed at trial. Claim construction will be determined at the close of all the evidence and after any hearing. The parties are expected to assert all their claim construction arguments and evidence in the Petition, Patent Owner’s Response, Petitioner’s Reply, or otherwise during trial, as permitted by our rules.” slip op. at 19
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,241,776 - PTAB · Jun 11, 2025 · IPR2025-00264 · APJ Scott C Moore · IPR · Institution
The Board instituted IPR of claims 1–15 on all asserted grounds, finding a reasonable likelihood that Koki would prove the claims obvious over Haley and Lai.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We may institute an inter partes review when “the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). If we institute an inter partes review, the trial must encompass all claims and grounds identified in the Petition. 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”). For the reasons set forth below, we conclude that there is a reasonable likelihood that Petitioner will prevail in establishing the unpatentability of all challenged claims. We, therefore, institute inter partes review of claims 1–15 on the grounds asserted in the Petition. B.” slip op. at 2
- BurdenInstituted
“not identical” to the structure that Petitioner identifies as corresponding to the “lifter” claim limitation. Prelim. Resp. 19. We agree that these structures are not identical. But on this record, they appear, at least preliminarily, to be equivalent. As Petitioner explains, both structures utilize a rotatable cam with pins to translate a driver (driver member 90 of the ’167 Patent and hammer 6 of Lai) into a position where the driver is ready for use. See Pet. 12–15. Patent Owner does not otherwise contest Petitioner’s showing that Lai teaches or suggests the subject matter set forth in limitations 1.4, 1.5, and 1.6, and we find Petitioner has made a sufficient showing that Lai does so.” slip op. at 20
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner
“1. Lifter The Petition explicitly states that the “lifter” limitation is a means- plus-function limitation—a contention Patent Owner does not dispute. See Pet. 6; Prelim. Resp. 9–11. Patent Owner argues, however, that Petitioner has “fail[ed] to identify any structure in the ’007 [sic] Patent to perform the claimed function.” Prelim. Resp. 10. We disagree. The Petition identifies the following corresponding structures from the Specification of the ’167 Patent: The “lifter” of the ’167 patent includes a rotatable cam lifter 100 (yellow, below left), with pin 104, 106, and 108 (green) on its face surface that engage protrusions 92 (blue) on the driver member 90 (orange). ’167 patent, 9:36-52, 16:39-53, Fig. 12. The ’167 patent also discloses two-pin variants: lifter members 465 and 480 in Figs. 31 and 33. ’167 patent, 32:21-36, 32:54- 33:2. satisfy 37 C.F.R. § 42.104(b)(3). We also note that at this stage of the proceeding, Patent Owner does not dispute that Petitioner has identified the correct corresponding structure. To the extent the parties wish to further address the construction of this claim limitation, they may do so during trial.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Petitioner has identified the storage chamber of Haley as being chamber 85, a volume of space bounded by housing 40, extension cylinder 76, and elongate accumulator shell 80. See Pet. 9–10; Ex. 1004 Fig. 1. Haley’s elongate accumulator shell 80 (which Petitioner identifies as the removal top cap) is not the same as chamber 85; it is merely one component of the structure that encloses chamber 85. See id. And, though the Petitioner-identified removable top caps of Haley (a cylinder-shaped component, see id.) and Saari/Enstrom (a removable sleeve that extends into the interior of Saari/Enstrom’s cylinder, see id. at 48–49) have different Petitioner-identified storage chambers. We, therefore, are not persuaded that Petitioner’s contentions necessarily rely on implicit and inconsistent claim constructions.” slip op. at 10
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,845,167 - PTAB · Jun 11, 2025 · IPR2025-00262 · APJ Mitchell G Weatherly · IPR · Institution
The Board instituted IPR of claims 1–20 on all grounds, finding a reasonable likelihood that Haley and Lai render the claims obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record,1 we conclude that Petitioner is reasonably likely to prevail with respect to at least one of the challenged claims.” slip op. at 2
- Other 314aDenied
“Patent Owner argues that we should discretionarily deny the Petition based on alleged deficiencies in the Petition. Specifically, Patent Owner argues that “even if arguments as to a few claims might have been properly presented in the Petition, a decision to institute here would require the Board to address—for the first time and with no Petitioner input—critical claim construction issues affecting nearly every claim” in contravention of the requirements of 37 C.F.R. § 42.104(b)(3). Prelim. Resp. 34–35. For the reasons discussed above, we are not persuaded on the current record that Petitioner has violated 37 C.F.R. § 42.104(b)(3), or that critical and unresolved claim interpretation issues justifying discretionarily denying the Petition exist. We, therefore, decline to deny institution on this basis.” slip op. at 10
- Skill levelSkill level board ownOther
“we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The parties’ briefs do not propose a specific definition of a level of ordinary skill in the art. See generally, Pet., Prelim. Resp. Dr. Vallee, however, testifies that one of ordinary skill in the art relevant to the ’954 patent: would have either (i) a Master’s degree in mechanical engineering with at least two years of experience in power nailer design; (ii) a Bachelor’s degree in mechanical engineering with at least five years of experience in powered nailer design; or (iii) ten (or more) years of experience in powered nailer design. This experience in powered nailer design would include mechanical design, tool design, manufacturing, mechanics of materials, stress analysis, ergonomics, and human factors. Ex. 1003, ¶ 49. For purposes of this Decision, we adopt and apply Dr. Vallee’s formulation regarding the level of ordinary skill in the art.” slip op. at 6
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesOther
“1. Lifter The Petition contends that the “lifter” limitation is a means-plus- function limitation, Pet. 7, which Patent Owner does not dispute, Prelim. Resp. 15–26. Patent Owner argues, however, that Petitioner has “fail[ed] to identify any structure in the ’007 [sic, ’954] Patent to perform the claimed function.” Prelim. Resp. 15. We disagree. Petitioner identifies the structures in the Specification corresponding to the “lifter” as follows: The “lifter member” of the ’954 patent includes a rotatable cam lifter 100 (yellow, below left), with pin 104, 106, and 108 (green) on its face surface that engage protrusions 92 (blue) on the driver member 90 (orange). ’954 patent, 9:25–41, 16:32–46, Fig. 12. The ’954 patent also discloses two-pin variants: lifter members 465 and 480 in Figs. 31, 33. ’954 patent, 32:12–27, 32:45–60. Pet. 15. This identification of corresponding structure is sufficient to satisfy 37 C.F.R. § 42.104(b)(3). We also note that at this stage of the proceeding, Patent Owner does not dispute that Petitioner has correctly identified the corresponding structure. The parties may further address the proper interpretation of “lifter” at trial.” slip op. at 7
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 10,478,954
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.