• GD Energy Products, LLC v. Kerr Machine CompanyAll claims unpatentable
  PTAB · Jun 29, 2026 · PGR2025-00031 · APJ Ryan H Flax · PGR · Final written decision

  Claims 1–14 are unpatentable as obvious under each of four asserted grounds: Kerr; Aplex and Stanton; Blume, Stanton, and Wilkinson; and the sale of the Kerr Pump.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The person of ordinary skill in the art would have a minimum of a bachelor’s degree in mechanical or petrochemical engineering, or a comparable engineering discipline, and a minimum of 3-5 years of work experience in the design and/or manufacturing of reciprocating pumps and valves, including fluid ends and/or comparable high pressure fluid components, for industrial applications, including for use in the oil and gas industry. See, e.g., EX1003, ¶32.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We decline to expressly construe any claim language. slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Regarding the combining of Aplex and Stanton, Petitioner asserts that the ordinarily skilled artisan would have understood that providing a packing/stuffing arrangement, as taught by Stanton, within a fluid end housing, as taught by Aplex, would improve pressure and fluid isolation compared with an arrangement where the packing was bolted to the outside of the fluid end as in Aplex unmodified. Pet. 66 (citing Ex. 1003 ¶¶ 189, 236). Patent Owner does not dispute this rationale. We find this to be a reason, with rationale underpinning, why the person of ordinary skill in the art would have combined these references with a reasonable expectation of success.” slip op. at 29

  • Adverse judgmentOther

    “The record indicates that Patent Owner has statutorily disclaimed claim 15 as of April 28, 2025. Ex. 2206.” slip op. at 8

  Patent outcomesUS 12,152,582 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 12,152,582
• Trove Brands, LLC v. Camelbak Products, LLCSome claims unpatentable
  PTAB · Jun 2, 2026 · IPR2025-00140 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–6 are unpatentable as obvious; claims 7–18 were not shown unpatentable because Ribarits does not disclose a mouthpiece disposed on the pivotal mount.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Trove contends that a person of ordinary skill in the art “would have had an undergraduate degree in mechanical engineering or equivalent coursework, and a year or more of experience in designing, prototyping, and/or manufacturing fluid containers or similar products” and that “[m]ore work experience may substitute for a lower level of education, and vice versa.” Pet. 15 (citing Ex. 1002 ¶ 25). While CamelBak offers “a similar, though slightly different level,” it nonetheless “discerns no material difference between the definitions provided by the parties for purposes of the Board’s decision in this proceeding.” PO Resp. 27. That being the case, we adopt Trove’s proposed definition of the level of skill in the art, as it is 2 JP 2002-211613A, published July 31, 2002 (Ex. 1004, “Nakajima”). 3 WO 2004/063042 A2, published July 29, 2004 (Ex. 1006, “Ribarits”). 4 US 4,485,963, issued Dec. 4, 1984 (Ex. 1007, “Panicci”). 5 US 6,523,711 B1, issued Feb. 25, 2003 (Ex. 1008, “Hughes”). reasonable and consistent with what is reflected in the asserted prior art and the specification of the ’250 patent. B. Claim Construction” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We will not bite. CamelBak’s original assertion—that the plain and ordinary meaning of the constituent parts of “mouth” and “piece” is “a piece (or part) that goes in the mouth”—underscores the fallacy of CamelBak’s additional physical contact requirement. PO Resp. 28 (emphasis added). Indeed, in support of that earlier assertion, CamelBak pointed to the very dictionary definition that we relied on at institution in construing “mouthpiece” as a part that either “goes in the mouth or to which the mouth is applied.” See id. at 31 (citing Ex. 2005 (emphasis added)). Even the original testimony of CamelBak’s own expert confirms that one skilled in the art “would understand that the term ‘mouthpiece’ is commonly known in the art as a part designed for a user’s mouth,” without any requirement for physical contact with the mouth. Ex. 2016 ¶ 58 (citing Ex. 2005) (emphasis added)). And nothing in the Specification limits that common understanding. Although, indisputably, the Specification contemplates an embodiment where the user physically contacts the mouthpiece with their teeth (i.e., a bite-actuated mouthpiece), it also contemplates an embodiment where the user simply inserts the bottle in their mouth and commences fluid flow by squeezing it. See Ex. 1001, 10:9–13. That disclosure supports a meaning of “mouthpiece” that simply requires placement in the opening of the user’s mouth without necessarily incurring physical contact with some portion of the mouth, such as the teeth, tongue, or lips. Indeed, had CamelBak wished to premise the meaning of “mouthpiece” on some sort of physical contact with the mouth, it knew how to do so. For instance, the independent claims of CamelBak’s earlier ’255 patent, which is the subject of the related 1137 IPR, are limited in just such a manner, as they recite “wherein the resilient mouthpiece is adapted to resiliently compress responsive to compressive forces applied to the resilient mouthpiece by a user’s teeth.” Ex. 2023, at 20–25 (emphasis added). Thus, we reject CamelBak’s attempt to narrow our construction of “mouthpiece” to something other than “a part (as of an instrument) that goes in the mouth or to which the mouth is applied.” Neither the intrinsic nor extrinsic evidence supports the narrower construction proposed by CamelBak.” slip op. at 11

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “In reply, Trove argues that CamelBak’s “novel” construction that the mouthpiece moves with rotational motion about that same axis of rotation defined by the two joint as the pivotal mount and in the same direction as the pivotal mount “are inconsistent with the claim language’s plain and ordinary meaning and find no support in the intrinsic and extrinsic record.” See Pet. Reply 16. But, because we find that, when properly construed, the claimed “pivotal movement with the pivotal mount” about “two joints that define a pivotal axis” requires that the mouthpiece rotate about the same axis and in the same direction as the pivotal mount, we reject Trove’s argument as unavailing. And, although we agree with Trove that Nakajima’s mouthpiece engages in counter-clockwise rotation about a “Second Pivot Axis” when Nakajima’s lid 4 is opened (id. at 20–22), that rotation is about a different axis—one defined by Nakajima’s protrusions 24 rather than the claimed “pivotal axis” defined by Nakajima’s hinge shafts 19—and in a different manner—an upward and counterclockwise path rather than the claimed “pivotal movement with the pivotal mount” defined by Nakajima’s lid 4. Finally, in an alternative theory, Trove and its expert use “image- manipulation tools” in an attempt to show that Nakajima’s mouthpiece engages in some initial “clockwise-rotation” with Nakajima’s lid as it is opened. See Pet. Reply 18–24. We reject that theory as entirely conjectural and unsupported by the evidence.” slip op. at 39

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable

    “We disagree. As discussed above, the proper construction of “for pivotal movement with the pivotal mount” requires that the mouthpiece mirror the rotational movement of the pivotal mount, i.e., rotate about the same axis as the pivotal mount and in the same direction as the pivotal mount. See supra § II.B.3. But Nakajima’s mouthpiece does neither, and, thus, does not exhibit the claimed “pivotal movement with the pivotal mount” about “two joints that define a pivotal axis for . . . the pivotal mount axis,” as properly construed.” slip op. at 36

  Patent outcomesUS 11,851,250 mixed
  Claim construction§ 103 obviousness
  Patents in suitUS 11,851,250
• Tesla, Inc. v. Charge Fusion Technologies, LLCAll claims unpatentable
  PTAB · May 13, 2026 · IPR2025-00032 · APJ Mitchell G Weatherly · IPR · Final written decision

  Claims 1–29 are unpatentable as obvious under §103 based on the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of a person of ordinary skill in the art at the time of the invention. Graham, 383 U.S. at 17. Petitioner submits that the ordinarily skilled artisan would have at least a bachelor’s degree in electrical or mechanical engineering (or an equivalent field) and at least two years of work experience involving automotive systems, including electric vehicle power management. . . . Additional industry experience or technical training may offset less formal education, while advanced degrees or additional formal education may offset lesser levels of industry experience. Pet. 2 (citing Ex. 1003 ¶¶ 30–32). Patent Owner “takes no position with respect to Petitioner’s proposed level of ordinary skill.” PO Resp. 17. For the purposes of our analysis below, we apply Petitioner’s proposed level of ordinary skill, which we find to be consistent with the problems addressed in the ’338 patent and the prior art.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “Initially, we note that “amount of charge” reflects no express limitation on the manner of expressing the “amount” or the “charge.” And the Specification uses both “desired charge percent level” and “desired charge range level” as alternative ways for a user may specify an “amount of 3 As recited in independent claims 10, 19, and 28 charge.” For example, the Specification describes that a user may specify an amount of charge by specifying a desired travel distance as follows: “the user may indicate a desired charging level (and/or a desired charging level may be automatically calculated) based on a desired distance of travel.” Ex. 1001, 19:49–57 (emphasis added). Therefore, “amount of charge” may also refer to a desired mileage or range. Figure 7 further demonstrates that a user may select “amount of charge” in terms of a “percent” or a “range” as shown in Petitioner’s annotated version of the pertinent portion of that figure as shown below.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree with Patent Owner. First, Patent Owner’s reliance on Wonderland as announcing a rule having broad effect is misplaced. Patent Owner contends that the “Federal Circuit has confirmed that where the primary reference already includes the function of the secondary reference, an allegation to incorporate that function into the primary reference is improper hindsight and no motivation to combine exists.” Id. at 29 (citing Wonderland NurseryGoods Co. v. Thorley Indus., LLC, 988 F.Supp. 2d 479, 498–99 (W.D. Pa. 2013), aff'd, 644 F. App'x 1011 (Fed. Cir. 2016); citing Kinetic Concepts, Inc. v. Smith & Nephew, Inc., 688 F.3d 1342, 1368 (Fed.Cir.2012))). Patent Owner’s citation to Wonderland does not support the proposition for which it is cited, namely that the Federal Circuit has “confirmed” that incorporating a function from a secondary reference into a primary reference is “improper hindsight” that precludes a motivation to combine teachings from the primary and secondary references. In Wonderland, the district court denied an accused infringer’s motion for summary judgment of invalidity, in part, due to its finding that genuine issues of material fact existed for the issue of whether sufficient motivation to combine prior art existed. Wonderland, 988 F. Supp. 2d at 511. The Wonderland decision does not constitute a final ruling on that issue, and the Federal Circuit’s summary affirmance of the final ruling by the district court does not address the issue or reflect how the issue was resolved at trial. Wonderland NurseryGoods Co. v. Thorley Indus., LLC, 644 F. App’x 1011 (Fed. Cir. 2016). Second, Petitioner also correctly points out that although Ferro refers to wireless charging, it provides no implementation details. Ex. 1004 ¶ 36; Ex. 2003, 54:8–55:9. Ferro also describes manual options for initiating charging, Ex. 1003¶ 146 (citing Ex. 1004 ¶ 109), and that an ordinarily skilled artisan would have been motivated to apply Oyobe’s vehicle sensor to allow a user to initiate Ferro’s charging methods more easily without the user having to leave the vehicle, Ex. 1003 ¶¶ 151, 152. Accordingly, we find that Petitioner has established that an ordinarily skilled artisan would have been motivated to incorporate Oyobe’s use of a sensor to establish presence of a vehicle near a charging station into Ferro’s system.” slip op. at 20

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “The test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference. . . . Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art.” MCM Portfolio LLC v. Hewlett-Packard Co., 812 F.3d 1284, 1294 (Fed. Cir. 2015). Patent Owner’s argument fails to account for the level of skill and creativity of an ordinarily skilled artisan, who would have possessed a bachelor’s degree in engineering and could have easily accounted for the differences in scale depicted by Letendre’s and Donnelly’s controls. Ex. 1003 ¶¶ 247–249. Accordingly, we find that Petitioner’s showing on the motivation to combine teachings of Ferro, Donnelly, and Letendre to arrive at limitation 1h is persuasive. slip op. at 30

  Patent outcomesUS 11,563,338 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,563,338
• Solaris Oilfield Site Services Operating, LLC / Solaris Oilfield Site Services Personnel, LLC v. Masaba, Inc.All claims unpatentable
  PTAB · Jan 26, 2026 · IPR2024-01179 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–25 are unpatentable under § 103 over the asserted combinations of Waldner, Dynatek, and additional references; the Board cancelled all challenged claims.

  RulingsFinal written decision

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “Also, to the extent Masaba relies on extrinsic expert testimony, we note that Masaba’s expert cites absolutely no support for his understanding of the claims, much less explains why we should adopt his understanding over the plain and ordinary meaning of “conveying aggregate” and “moving aggregate.” See Ex. 2004 ¶ 34. Absent supporting citations, such extrinsic testimony is entitled to little, if any, weight. As such, we reject the notion that Waldner’s discharge chute member 242 is not a conveyor “for conveying aggregate” or “for moving aggregate,” as required by claim elements 1[h] and 1[i].” slip op. at 21

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We disagree that Dr. Durham does not possess the necessary level of skill in the art to qualify as an expert in this case. Looking at the specification of the ’689 patent and the prior art of record, we think Masaba sets the bar too high. We acknowledge that one of ordinary skill in the art should have some education and/or experience in the mechanical art of conveying aggregate materials, but we do not think opining on the ’689 patent and asserted prior art necessarily requires that person to have the amount of education and experience that Masaba advocates. The ’689 patent relates generally to an “aggregate transferring system for receiving aggregate from a vehicle and elevating the aggregate to a higher vertical level for deposit into, for example, a silo.” Ex. 1001, 1:15– 18. And, as described in the ’689 patent and discussed later, the transferring system is an assembly of known types of conveyors, such as a belly-dump truck conveyor, a bucket elevator, and an articulated belt conveyor, for transferring the aggregate horizontally and vertically from a belly-dump truck to the discharge point, such as a silo. Without doubt, Dr. Durham has enough education and experience to reliably opine on the combination of known parts.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningNo construction needed

    “We reject this argument for several reasons. First, nowhere does the plain language of the claims specify how the aggregate is conveyed or moved from the conveyor extension assembly’s inlet to its outlet, be it passively by means of gravity or actively by means of a conveyor belt. Instead, the claims simply use those verbs according to their plain and ordinary meaning, which is “to transfer or deliver” or “to cause to go or pass” from one place to another. See Ex. 3001, 253 (defining “convey”), 760 (defining “move”).10 Second, the specification of the ’689 patent similarly uses these terms in a plain and ordinary sense, without ever attributing to them some sort of special meaning. See, e.g., Ex. 1001, 4:9–12 (“The apparatus 10 is suitable for performing the transfer of aggregate from 10 We reference the original pagination of the dictionary in which these definitions appear. one location to another, such as, for example, from a vehicle carrying the aggregate to a silo 1 for storing the aggregate.”). The ’689 patent specification also makes clear that active conveyance of the aggregate is an option and not a requirement of the claimed invention, stating that the conveyor extension assembly “may further include a conveyor belt 150.” Ex. 1001, 10:60–66 (emphasis added). Limiting claim elements 1[h] and 1[i] to a device “for actively conveying” or “for actively moving aggregate” would improperly import limitations from the specification into the claims. Thus, based on the intrinsic evidence, we determine that claim elements 1h and 1k are properly construed to encompass passive and/or active movement of the aggregate via the conveyor extension assembly.” slip op. at 20

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)Not reached

    “Owner asserts” that two claim terms—“unloader structure” and “trailer structure”—should be construed as means-plus-function limitations under 35 U.S.C. § 112(f), Solaris submits an express construction detailing the corresponding structure in the specification for performing the recited function of the claimed unloader and trailer structures. See id. at 24–25. Only in disputing Solaris’s Ground 3 does Masaba advocate that the claim term “trailer structure” should be construed under § 112(f), and then only in conjunction with dependent claims 3 and 21. See PO Resp. 58. As such, we address Masaba’s proposed construction in our analysis of Ground 3. We now turn to Solaris’s grounds of unpatentability.” slip op. at 12

  Patent outcomesUS 11,780,689 unpatentable
  Claim construction§ 103 obviousnesscites KSR
  Patents in suitUS 11,780,689
• Trove Brands, LLC v. Camelbak Products, LLCNo claims unpatentable
  PTAB · Jan 15, 2026 · IPR2024-01137 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–7 and 9–23 were not shown unpatentable under § 103 because the asserted combinations failed to teach the claimed mouthpiece movement or bite-actuated compression.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Trove contends that a person of ordinary skill in the art “would have had an undergraduate degree in mechanical engineering or equivalent coursework, and a year or more of experience in designing, prototyping, and/or manufacturing fluid containers or similar products” and that “[m]ore work experience may substitute for a lower level of education, and vice versa.” Pet. 18 (citing Ex. 1003 ¶ 26). While CamelBak offers a “slightly different” level of skill in the art, it nonetheless “discerns no material difference between the definitions provided by the parties for purposes of the 2 JP 2002-211613, published July 31, 2002 (Ex. 1004, “Nakajima”). 3 US 6,070,767, issued June 6, 2000 (Ex. 1005, “Gardner”). 4 WO 2004/063042, published July 29, 2004 (Ex. 1006, “Ribarits”). 5 US 4,485,963, issued Dec. 4, 1984 (Ex. 1007, “Panicci”). 6 US 6,523,711 B1, issued Feb. 25, 2003 (Ex. 1010, “Hughes”). Board’s decision on the patentability of the ’255 patent.” PO Resp. 14–15. That being the case, we adopt Trove’s proposed definition of the level of skill in the art, as it is reasonable and consistent with what is reflected in the asserted prior art and the specification of the ’255 patent. B. Claim Construction” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalTerm construed patent owner constructionDecided for patent owner

    “not move in a circular path that maintains a constant radius about the axis of rotation defined by McDonough’s axle 30, but instead engages in up-and-down translational motion (red arrows) relative to axle 30. Thus, we understand CamelBak’s arguments during reexamination to have distinguished the purely rotational (i.e., circular) motion of the claimed mouthpiece from a mouthpiece that moves with a translational component relative to the pivotal axis. In sum, this reexamination history shows that, by distinguishing over the translational motion of McDonough’s mouthpiece, CamelBak limited the claimed mouthpiece to one that (1) maintains a circular path of constant radius about the pivotal mount’s axis of rotation, and (2) does not include a path that has a translational component relative to the pivotal axis. See Fenner Investments, Ltd. v. Cellco Partnership, 778 F.3d 1320, 1323 & 1325 (Fed. Cir. 2015) (“Any explanation, elaboration, or qualification presented by the inventor during patent examination is relevant, for the role of claim construction is to capture the scope of the actual invention that is disclosed, described, and patented.”) (internal quotation marks omitted); CVI/Beta Ventures, Inc. v. Tura LP, 112 F.3d 1146, 1158 (Fed. Cir. 1997) (“[T]hrough statements made during prosecution or reexamination an applicant for a patent or a patent owner, as the case may be, may commit to a particular meaning for a patent term, which meaning is then binding in litigation.”) (emphasis added); see also Univ. of Massachusetts v. L’Oreal S.A., 36 F.4th 1374, 1379 (Fed. Cir. 2022) (“The prosecution history, in particular, may be critical in interpreting disputed claim terms, and even where prosecution history statements do not rise to the level of unmistakable disavowal, they do inform the claim construction.”) (internal quotations omitted).” slip op. at 17

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Those detailed descriptions demonstrate that “adapted to,” as recited in claims 1 and 20, means that the resilient mouthpiece is specifically designed and configured to dispense fluid as a result of a user biting the mouthpiece, rather than merely being “capable of” being compressed. See Giannelli, 739 F.3d at 1379–80. Indeed, as disclosed, a distinct benefit of the resilient mouthpiece being bite-actuated “is that a user may position the drink bottle (and mouthpiece) to a desired drinking orientation, and even a partially or completely inverted orientation, without drink fluid being dispensed from the mouthpiece” until the user bites upon the mouthpiece to commence fluid flow through self-sealing valve to the user. Id. at 10:9–19. Thus, the intrinsic evidence, i.e., the specification and figures of the ’255 patent, confirm that the phrase “adapted to” means “designed or configured to” and is not satisfied by mere hypothetical capability. That is, as claimed, the resilient mouthpiece is designed or configured to compress based on actual forces applied by a user’s teeth, as opposed to merely being capable of compression based on the inherent nature of the mouthpiece’s material. C. Obviousness” slip op. at 24

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Although we agree with Trove that Nakajima’s mouthpiece engages in up-and-down movement relative to the pivot axis identified in Trove’s annotated figures, we disagree that Nakajima’s mouthpiece is “pivotal about an axis defined by the pair of lateral projections as [they] rotate within the pair of sockets,” as required by claim 1. As discussed above, the proper construction of this claim limitation requires that the mouthpiece moves with rotational motion in a circular path of constant radius about the pivotal axis defined by the pair of lateral projections. See supra § II.B.1. Nakajima, on the other hand, discloses that its mouthpiece moves with translational motion, i.e., up-and-down movement, relative to the pivotal axis defined by lateral projections 19 of Nakajima’s lid 4—“[T]he mouthpiece moves up and down in conjunction with the opening and closing of the lid.” Ex. 1004 ¶ 3 (emphasis added); see also id., Abstract (“[T]he mouthpiece 2 moves up and down in conjunction with the opening and closing of the lid 4.”). Indeed, although Trove relies exclusively on Nakajima’s disclosure of up-and-down movement for the mouthpiece, Trove never explains how such up-and-down movement equates to rotational motion required by the disputed limitation of claim 1. Nor can it.” slip op. at 28

  Patent outcomesUS 10,676,255 not shown unpatentable
  Claim construction§ 103 obviousness
  Patents in suitUS 10,676,255
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.No claims unpatentable
  PTAB · Dec 10, 2025 · IPR2024-01186 · APJ Brian D Range · IPR · Final written decision

  Claims 1–20 were not shown unpatentable because Kwatra does not teach or suggest minimizing rotational velocity and acceleration as required by the claims.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) would have the following characteristics: “a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing or digital cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–37). Petitioner states that, “[a]lternatively, a POSITA would have four years of experience working on image or video processing 6 Patent Owner asserts objective evidence of nonobviousness. Prelim. Resp. 19–27. or digital cameras.” Id. Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute the level of ordinary skill in the art. Prelim Resp. 14–15. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’894 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “Petitioner “does not believe any terms require a formal construction.” Pet. 6. Patent Owner agrees “no claim terms presently require construction to resolve any current dispute between the parties.” PO Resp. 15. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Kwatra teaches, at Equation 7, minimizing velocity and acceleration of a function representing camera path (P). FF ¶¶ 6, 8–9. Kwatra does not state that this camera path function considers rotation. Rather, the words “camera path” suggest x, y, z movement of the camera rather than rotation of the camera. Dr. Foroosh’s testimony that Kwatra’s minimization of a smoothed camera path does not result in minimizing rotational velocity and acceleration is credible because this testimony is consistent with Kwatra as a whole and consistent with the other evidence of record. Id. ¶ 10. Kwatra recognizes that image rotation angle (“θ”) may not remain smooth. Id. ¶ 12. But rather than attempting to minimize velocity and acceleration of rotation of the camera housing, Kwatra states that applying a smoothness constraint on rotation angle “may be non-linear.” Id. ¶ 13. Consistent with Kwatra, Dr. Foroosh credibly explains the difficulty of applying linear techniques to rotation. Id. Thus, Kwatra proposes instead constraining the sine and cosine of theta. Id. ¶ 14. The Kwatra provisional application is part of the Kwatra reference (id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “(id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

  Patent outcomesUS 10,574,894 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,574,894
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentable
  PTAB · Dec 2, 2025 · IPR2024-01052 · APJ Brian D Range · IPR · Final written decision

  Claims 1, 2, 7–12, and 17–20 are unpatentable as obvious; claims 3–6 and 13–16 were not shown unpatentable because the asserted Watanabe combinations were unsupported.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–38). Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute and applies Petitioner’s proposed level of skill. PO Resp. 6. We find that Petitioner’s proposal is reasonable and consistent with the ’832 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). Thus, we apply Petitioner’s proposal in our analysis.” slip op. at 13

  • Prior constructionPrior construction adoptedDecided for petitioner

    “In our Institution Decision, we construed “determin[ing] a viewing window for the visual content as a function of progress through the progress length” as “requiring determining a viewing window for different times of the video.” Inst. Dec. 21. Neither party disputes this construction. PO Resp. 7; Pet. Reply 1–7. We maintain this same construction.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Thomason are in the same field of endeavor. Thomason describes a camera and method for correctly orientating pictures from the camera. See, e.g., Ex. 1004 ¶¶ 1, 2 29–40, Figs. 3a–3b. In particular, Thomason is interested in rotating and cropping images to reduce the effect of poor orientation. Pet. 9 (citing Ex. 1004 ¶¶ 2, 34, 36). Pacurariu likewise describes aligning and resizing/cropping of a captured image to correct poor orientation. See, e.g., Ex. 1005 ¶¶ 1, 3, 45–56, Figs. 5A–5C. The preponderance of the evidence also supports that a person having ordinary skill in the art would have had reason to combine the Pacurariu’s teachings with Thomason to predictably improve Thomason. Thomason teaches correct rotation of video data and makes use of rotation sensor to correct rotated images. Pet. 19–21 (citing, e.g., Ex. 1004 ¶¶ 4, 27, 29, 35; Ex. 1002 ¶¶ 76–77). Pacurariu similarly uses sensors and measures tilt angle of the camera. Id at 21–22 (citing, e.g., Ex. 1005 ¶¶ 51–52, Fig. 6; Ex. 1002 ¶ 78). Pacurariu further teaches that its tilt data angle can be stored for each “video frame.” Id. at 22 (citing Ex. 1005 ¶ 52). Petitioner, with support from credible testimony of Dr. Katsaggelos, explains how the teachings of Thomason and Pacurariu could be successfully combined. Id. at 23 (citing, for example, Ex. 1002 ¶ 81). A person of ordinary skill in the art could have known that Thomason’s system could be improved by saving rotation data for each video frame and correcting images on a frame-by-frame basis. Id. at 23–24. The testimony of Dr. Katsaggelos is credible in this regard. Ex. 1002 ¶¶ 80–81. Petitioner and Dr. Katsaggelos explain the references’ teachings and, based on these teachings, assert that a person having skill in the art would have had reason to combine with reasonable expectation of success based on those teachings. Reason to combine may properly come from the references themselves. KSR Int’l Co., 550 U.S. at 418 (explaining reason to combine may come from “interrelated teachings of multiple patents”). Based on the evidence presented, Petitioner establishes by a preponderance of the evidence that a person having ordinary skill in the art would have had reason to combine the teachings of Thomason and Pacurariu with a reasonable expectation of success. Ex. 1002 ¶¶ 76–81, 89–92; Ex. 1004 ¶¶ 4, 8–9, 27, 29, 35; Ex. 1005 ¶¶ 26, 41, 46, 51–52, 55–57, Figs. 6, 7.” slip op. at 27

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for patent owner

    “evaluating nexus between the claimed invention and objective evidence of nonobviousness, also referred to as secondary considerations. Lectrosonics, Inc. v. Zaxcom, Inc., IPR2018-01129, Paper 33 at 33 (PTAB Jan. 24, 2020) (precedential). We first consider whether Patent Owner has demonstrated “that its products are coextensive (or nearly coextensive) with the challenged claims,” resulting in a rebuttable presumption of nexus. Id. at 33. If not, that “does not end the inquiry into secondary considerations”; “the patent owner is still afforded an opportunity to prove nexus by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. (quoting Fox Factory, 944 F.3d at 1373–75).” slip op. at 62

  Patent outcomesUS 11,336,832 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,336,832
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentable
  PTAB · Nov 26, 2025 · IPR2024-00984 · APJ Nabeel U Khan · IPR · Final written decision

  Claims 6 and 7 are unpatentable as obvious over Meulen and Chao; claim 1 was not shown unpatentable because Meulen does not disclose transforming an image captured by its camera.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner argues that a person of ordinary skill in the art in the relevant field “would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras,” or alternatively “would have four years of experience working on image or video processing, or digital cameras.” Pet. 6. Petitioner further argues that an “advanced graduate degree” may “make up for the work experience.” Id. (citing Ex. 1002 ¶¶ 33–34). “Patent Owner applies Petitioner’s proposed level of skill.” PO Resp. 4–5 (citing Ex. 2027 ¶¶ 19–20). We adopt Petitioner’s proposed level of ordinary skill because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’413 patent and the cited prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “From the outset we note that the words of the claim recite “non- uniformly shift[ing] the pixels” and do not recite a “non-linear” transformation. This favors Petitioner’s position, which is based directly off the definition of “non-uniform,” over Patent Owner’s position, which substitutes “non-linear” for “non-uniform.” Generally, then, we would determine the ordinary and customary meaning of the claim term in the context of the entire Specification. Here, however, the ʼ413 patent does not mention “uniform” or “non-uniform” shifting of pixels anywhere except in the claims. The Specification, therefore, provides limited guidance, by itself, as to the ordinary and customary meaning of the term. Nonetheless, even reviewing the portions of the Specification cited by the parties, we see no clear or unambiguous effort to limit the challenged claims to require only non-linear transformations in which the pixels to which a transformation is applied do not have the same amount of shift. is not non-linear. Pet. Reply 1. Specifically, Petitioner argues that the center circle of Figure 2B maintains the original circular shape after the transformation is applied to the image which contradicts Patent Owner’s argument that no two pixels will have the same amount of shift. Pet. Reply 1–2. We agree. In Figure 2B of the ʼ413 patent, the center of the image is chosen to be the region of interest. Ex. 1001, 4:19–21. After the input image goes through linear scaling (step 204) and then non-linear warping (step 206) the circles become more vertically compressed as they approach the top and bottom edges and more horizontally stretched as they approach the left and right edges. Id. at 4:22–30. But “the center circle is fully corrected so that it maintains the original circular shape of the corresponding circle in the input image 212.” Id. at 4:23–25. This means that at least some pixels, such as those of the center circle, undergo the same amount of shift after being transformed.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “readable instructions” of claims 1 and 2 must occur in a particular order. Specifically, Patent Owner argues that the step of “determine a portion within the input image” must occur after “obtain[ing] an image” and before “apply[ing] a transformation to the input image.” PO Resp. 17 (citing Ex. 2027 ¶ 59). Petitioner argues, on the other hand, that the specification does not require such an order and, in fact, describes an embodiment where such an order is not followed. Pet. 3. We determine that the “determine a portion within the input image” step does not need to occur after the “obtain an image” step and before the “apply a transformation to the input image” step. As Patent Owner itself points out, claims 1 and 2 are apparatus and system claims respectively, and an ordering of the limitations of such claims is not necessary. PO Resp. 17. Even if we were to treat the apparatus and system claims as reciting the steps of a method, “as a general rule the claim is not limited to performance of the steps in the order recited, unless the claim explicitly or implicitly requires a specific order.” Baldwin Graphic Systems, Inc. v. Siebert, Inc., 512 F.3d 1338, 1345 (Fed. Cir. 2008) (citing Interactive Gift Express, Inc. v. Compuserve Inc., 256 F.3d 1323, 1342–43 (Fed. Cir. 2001)). We see nothing in the claims that would cause us to break this general rule. Patent Owner argues that the claims imply a “specific order because the ‘determine a portion’ requirement operates on ‘the [obtained] input image’ and defines the ‘portion’ that is necessary for the 23; Ex. 2027 ¶ 59). Although the steps are recited in a specific order in the claim, as they necessarily must be, the claim does not expressly specify that the certain steps must occur before or after other instructions, nor does logic imply such a requirement. For example, if certain characteristics of the image are known before the image is obtained (e.g. the size, dimensions, resolution, aspect ratio, or content etc.) the determination of the portion of the image could be made before the image is obtained. These characteristics may be based on the specific device taking the image or the subject matter of the image, both of which may be known before the image is captured or obtained. It is, therefore, not necessary that the image be obtained in order for a portion of the image to be determined. Similarly, we do not find the written description to expressly or implicitly specify an order the claimed step of “determine a portion of the input image.” For example, the written description of the ʼ413 patent states that in Figure 2B “the center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction as the frame boundary is approached.” Ex. 1001, 4:19–22. Patent Owner emphasizes that this disclosure implies that an input image is obtained before the center portion is chosen. PO Resp. 19 (citing Ex. 1001, 3:63–64, 4:19–22). But the description of this embodiment does not expressly recite an order. For example, the description of Figure 2A explains that “an input image is obtained” in step 202, “the image is then scaled” in step 204, and a “non-linear warping is then applied” in step 206. Ex. 1001, 3:63–4:3. This description does not mention “determin[ing] of a portion of the image” as a separate step or as part of the listed steps, and therefore, does not specify an order in which this step must occur. is configured so that some areas of the image are fully corrected geometrically, while some other areas are distorted. . . . [T]he center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction.” Id. at 4:17–19. This excerpt from the ʼ413 patent, which the Patent Owner specifically relies on (PO Resp. 19), also does not specify an order in which the determination step (choosing of the region of interest) takes place. Moreover, because the ʼ413 patent states that the warp module is configured so that some areas are fully corrected while others are not, the determination step could take place at the time the warp module was configured, presumably before the image was obtained. Finally, the ʼ413 patent states that “in the case, of video, the area may dynamically change between images (e.g. to follow a moving object).” Ex. 1001, 4:34–36. Patent Owner argues that this description “requires first obtaining the image in order to locate the object that is being followed.” PO Resp. 19–20. This embodiment is related to the case of video or a moving object, which the challenged claims do not mention. We, therefore, decline to limit the scope of the claim based on this embodiment. Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2005) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Having reviewed the parties’ arguments and cited evidence we determine Petitioner has established, by a preponderance of the evidence, that a POSITA would have been motivated to combine Meulen and Chao. For example, Petitioner argues that “[i]t would have been obvious that when performing image scaling, pixels from the input to output positions are shifted based on a scaling factor.” Pet. 91. Meulen teaches scaling but does not provide the details regarding scaling. E.g., Ex. 1007, 1:55–56, 4:37–49. We agree that in light of Meulen’s disclosure of scaling, a POSITA would have looked to other references, such as Chao, for further details on how to perform scaling. Dr. Katsaggelos provides credible support, testifying that “Meulen mentions ‘compression and/or scaling,’ and provides details on how to perform compression. But Meulen does not disclose the details of how to perform scaling. A POSITA when faced with Meulen and having the knowledge about scaling would have been motivated to turn to a prior art reference that discloses the details of scaling.” Ex. 1002 ¶ 262. Patent Owner argues that Petitioner provides no motivation to combine other than asserting that it involves combining prior art elements. PO Resp. 35 (quoting Pet. 92). As explained above, however, Petitioner does more than just assert that the motivation involves combining prior art elements. Instead, Petitioner explains that Meulen discusses both compression and scaling, and provides details regarding compression but does not provide details on how to scale. Pet. 91–92; Ex. 1002 ¶¶ 262–262. Thus, Meulen teaches that scaling was a known technique. See Hybritech, (“a patent need not teach, and preferably omits, what is well known in the art”). Dr. Katsaggelos testifies that, in this situation, a POSITA would have looked to Chao for details regarding scaling. Ex. 1002 ¶¶ 262–263. We determine this establishes, by a preponderance of the evidence, that a POSITA would have had reason to combine Meulen’s teachings with Chao. Patent Owner draws a distinction between Meulen and Chao, arguing that “Meulen is concerned with modifying content from a media source to be displayed on a device’s screen while Chao, by contrast, is directed to changing the aspect ratio of a document intended for printing.” Id. at 36 (citing Ex. 2027 ¶¶ 89–90). Patent Owner’s argument is contradicted, however, by Chao’s disclosure which states that “after all the background and foreground elements in the image have been resized . . . [t]he image may be output by displaying the image on or as part of: a display screen such as a computer monitor, camera screen, printer screen, printed page, projected image, or the like.” Ex. 1008 ¶ 32. Patent Owner argues that Meulen’s system avoids distortion near the middle where the user’s focus is more likely to be, while Chao, on the other hand, is directed to avoiding distortion of stylized borders on differently sized pages. PO Resp. 36–37 (citing Ex. 1006, 1:26–29; Ex. 1008 ¶¶ 1, 25; Ex. 2027 ¶¶ 91–92). This argument reads the prior art too narrowly and does not address Petitioner’s combination. Petitioner does not rely on Chao for its teaching of avoiding distortion near the borders of the image, but rather on its teaching of scaling the image while maintaining the design intent of the original image. Ex. 1008 ¶ 22; Ex. 1014 ¶ 67. Thus, Petitioner is applying Chao’s techniques of scaling (regardless of where the area of 92. Finally, Patent Owner argues that Chao’s approach of stretching/shrinking only the background and uniformly scaling entire foreground objects is suitable for graphic design but incompatible with Meulen which is concerned with adapting externally derived media source content for display on a fixed size screen. PO Resp. 37–38 (citing Ex. 2027 ¶ 93). We disagree with Patent Owner’s argument because it does not address Petitioner’s combination. Petitioner relies on Chao’s teaching of stretching/shrinking of background elements and applies that stretching/shrinking to Meulen’s images displayed on its screen. Pet. 91–92 (citing Ex. 1008 ¶¶ 28, 63; Ex. 1002 ¶ 263). The fact that Chao applies its teaching to graphic design does not prevent a POSITA from applying those teachings to Meulen’s media content displayed on its screen.” slip op. at 20

  Patent outcomesUS 10,015,413 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,015,413
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentable
  PTAB · Nov 25, 2025 · IPR2024-01165 · APJ William V Saindon · IPR · Final written decision

  Claims 1–21 were not shown unpatentable because Zhou does not teach the claimed low-light high-pass or stickiness parameter limitations.

  RulingsFinal written decision

  • BurdenFwd all claims patentableNot shown unpatentable

    “4. Conclusion for the Prior Art Analysis In sum, we find that Zhou does not disclose the low-light high-pass parameter or the stickiness parameter. Petitioner’s grounds for both independent claims 1 and 16 rely on Zhou for teaching a low-light high-pass parameter or a stickiness parameter. Pet. 23–28, 64. Because we find Zhou does not teach these limitations, all of Petitioner’s grounds fall for this reason. III. CONCLUSION For the reasons given above, we determine that Petitioner has not established by a preponderance of the evidence that any claim of the ’840 patent would have been obvious in view of the prior art cited.” slip op. at 18

  • Skill levelSkill level petitioner adoptedOther

    “A person of ordinary skill in the art (POSITA) in the field of the ’840 patent would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras. Alternatively, a POSITA would have four years of experience working on image or video processing, or digital cameras. An advanced graduate degree in the disciplines cited above may make up for the work experience indicated above. Pet. 6 (citing Ex. 1002 ¶ 32). Patent Owner applies the same standard. PO Resp. 26–27. We use this agreed-upon standard for purposes of this Decision.” slip op. at 7

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “We review this testimony based on the strength of the underlying factual basis. 37 C.F.R. § 42.65(a); Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985) (“Lack of factual support for expert opinion going to factual determinations, however, may render the testimony of little probative value . . ..”). Here, the underlying factual basis is not very strong for either witness. That said, we find that Dr. Foroosh’s testimony is more logically sound and consistent with the ’840 patent disclosure. Based on our reading of the specification, we find a clear indication that “stickiness” has to do with the past. In order to control “the extent by which preceding portion(s) . . . impacts determination of the smoothed trajectory” (emphasis added), one must control the degree by which the past frames impact determination. And to control the degree of the past’s influence, one must, as a consequence, favor the past over the future. That is, the frame of reference of the stickiness parameter is the past. The specification could have used a time-agnostic term, like a “nearness” or “adjacency” parameter, but it did not. Thus, the fact that “stickiness” is used in conjunction with “preceding” indicates that it deals with a preference for preceding frames. On this basis, we find Dr. Katsaggelos’s testimony less persuasive than Dr. Foroosh’s.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “That said, we do not construe a stickiness parameter as prohibiting consideration of future frames. Instead, we determine that the stickiness parameter’s value determines the impact of the preceding portions, versus the following portions. The ’840 patent recognizes this, when it says that a stickiness parameter value of “1,” representing a “lazy” stabilizer that maximally favors the past, would not override a violation of the margin constraint based on the look-ahead (i.e., would not allow the viewing window to fall out of bounds in the event of large future motion). See Ex. 1001, 22:26–30; see also id. at 12:61–13:29 (acknowledging that favoring the past may lead to a conflict with the viewing window determination), 15:39–60 (adjusting the viewing window to ensure it does not violate a margin constraint). Thus, while a past-favoring parameter by necessity favors the past over the future, it does not prohibit consideration of the future. In view of the above, we construe the claimed “stickiness parameter” as a parameter that controls the extent by which preceding portions of the trajectory impacts determination of the smoothed trajectory, with an understanding that in order to favor preceding portions, to some extent, the parameter must relatively disfavor following portions.” slip op. at 10

  Patent outcomesUS 10,958,840 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,958,840
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentable
  PTAB · Nov 25, 2025 · IPR2024-01164 · APJ William V Saindon · IPR · Final written decision

  Claims 1–21 were not shown unpatentable because Shi does not disclose the claimed low-light high-pass parameter required by the asserted obviousness grounds.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Given the teachings of the specification, we agree with Patent Owner that a low-light high-pass parameter is a parameter of a smoothing function that favors high frequencies (high pass) when exposure times are long (low light). See Tr. 42:10–18 (Patent Owner’s counsel stating that “high-pass” means “there’s a bias or preference for high frequencies”); Ex. 2020, 93:23– 94:15 (Petitioner’s declarant, Dr. Katsaggelos, agreeing that a high-pass system attenuates the low frequency of a signal). Although we acknowledge Petitioner’s position that the specification provides other ways or considerations in implementing a smoothing function, based on our above analysis of the specification, we find that the specification describes the lowlight high-pass parameter as a specific component of a smoothing function. See, e.g., Ex. 1001, 21:17–25 (setting out several parameters besides the low-light high-pass parameter used in trajectory smoothing).” slip op. at 10

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “position and a real device position. Id. at 18:27–40. In other words, the blur is addressed by analyzing the image to identify motion and then shifting the image. Shi, however, does not disclose how its parameter is based on low light (or the long exposure times indicative of low light). In its Petition, Petitioner asserts that a person of ordinary skill in the art would understand that “blurs can be caused by low light conditions.” Pet. 28 (citing Ex. 1003 ¶ 111). Although this is true, that does not mean that Shi’s blurs are identified by a parameter that considers low light. As we just described, Shi identifies the blur by quantifying the amount of motion of the points in an image, not by identifying low light. This is simply a different way to determine the presence of motion blur. In Shi, blur is measured, whereas in the ’840 patent, it is inferred based on low-light conditions (e.g., by observing the exposure time). See, e.g., Ex. 1007, 18:7– 26; Ex. 1001, 19:12–26. In its Reply, Petitioner does not point to any further disclosures. Accordingly, we find that Shi does not disclose the “low-light” aspect of the claimed low-light high-pass parameter. This is sufficient to determine that Petitioner’s ground does not meet all claim limitations. Similarly, we find that Shi does not disclose the “high-pass” aspect of the parameter. Shi’s blur compensation uses a spherical interpolation to modify the image. Ex. 1007, 18:27–40. The low-light high-pass parameter, as we have construed the term, allows more high frequencies. To allow more high frequencies, this necessarily means either allowing fewer low frequencies, or allowing more high frequences as opposed to some counterfactual situation in which fewer high frequencies were going to be allowed. See Ex. 2020, 94:23–95:15; Ex. 2022. We are directed to no persuasive evidence from Petitioner that Shi’s spherical interpolation favors high frequencies over low frequencies. Accord Ex. 2018 ¶ 107 (Patent Owner’s expert stating that Shi’s spherical interpolation “reintroduce[es] both high- and low-frequency motion”). Even if Shi allows the viewing window to track the camera position “consistent with the natural blur in the image” (Ex. 1007, 17:63–67), we are not provided with sufficient evidence to conclude by a preponderance of the evidence that providing a similar visual goal as a high-pass parameter (Ex. 1001, 22:16–18, “the output motion may include high frequencies that mask motion blur”) is the same as having a high-pass parameter. Again, merely preserving high frequencies is not the same as having a “high-pass parameter” because, as construed, a “high-pass parameter” also involves some degree of attenuation of low frequencies or relative increase of high frequencies. Accordingly, we find that Shi does not disclose the “high-pass” aspect of the claimed low-light high-pass parameter.” slip op. at 18

  Patent outcomesUS 10,958,840 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,958,840

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.