• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Klipsta Pty Ltd v. Lindsay AlbaneseSome claims unpatentable
  PTAB · Jul 10, 2026 · IPR2025-00346 · APJ Annette R Reimers · IPR · Final written decision

  Claim 16 is unpatentable as obvious over the asserted grounds; claims 1–15, 17, and 18 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). Petitioner contends that a person having ordinary skill in the art at the time of the invention (“POSITA”) “would be a regular consumer/shopper with a rudimentary knowledge of the use of magnetic clips and a basic understanding of clip construction.” Pet. 13. We find that the ’047 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of skill reflected in these references and in the ’047 patent is consistent with the definition of a person of ordinary skill in the art proposed by Petitioner. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10

  • BurdenMixed

    “Petitioner’s mapping of the components of KR ’458’s fastening device is insufficient. Although Petitioner maps the center line of fastening member 115 to the recited second end, Petitioner fails to adequately map the recited first end of the second strap or explain why one of skill in the art would consider the second ferromagnetic member (convex member 117) to be disposed at the first end of the second strap as required by claim 1. that the first end is “upward to connector 117.” Pet. 24. This is not the end of the second strap. As discussed above, the end of the second strap wraps around rectangular ring 210 and is then secured to itself.7 Connector 117 is positioned below the true end of the strap, more in the middle of this segment of the strap. In other words, Petitioner arbitrarily defines the strap as only the portion of hat holder 110 between the center line and connector 117, in contradiction to what KR ’458 actually discloses. Nowhere does Petitioner explain why connector 117 is disposed at the first end of the second strap. Neither does Petitioner explain why we should disregard the true end of the strap, nor why one of skill in the art would consider only a middle portion of the strap to be the second strap. Thus, Petitioner has not satisfied its burden in this regard. Therefore, Petitioner has not shown that KR ’458 discloses “a second strap having a first end and a second end, the second strap joined to the first strap,” with “a second ferromagnetic member disposed at the first end of the second strap.” For the foregoing reasons, we determine that a preponderance of the evidence does not support that claim 1 is anticipated by KR ’458.” slip op. at 23

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner

    “The ’047 patent discloses that in addition to being separate straps, the rear strap and the front strap “can be formed from a single piece of material.” Ex. 1001, 3:40–44, 5:24–32, 10:18–25. In particular, Figures 5A–5B of the ’047 patent illustrate rear strap 510 and front strap 520 as being “formed from a single piece of material that is folded approximately in half where a first half can be the rear strap 510 and a second half can be the front strap 520.” Id. at 10:18–21, Figs. 5A–5B. Indeed, Patent Owner acknowledges “[i]t should be noted that forming the first and second straps from a single piece of material is well within the scope of the claimed invention.” Ex. 1007, 5 (citing the ’047 patent at 3:37–44). Moreover, we note the positions taken by the parties are consistent with the fact that claim second strap are formed from a single folded strap.” Ex. 1001, 14:47–48. We, therefore, adopt Petitioner’s construction of “the second strap joined to the first strap” to include “a single piece of material.”” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for patent owner

    “Petitioner’s construction of a “hook” to include a “structure that serves to attach the hat holder to another object” is based on function, rather embodiments in the Specification of the ’047 patent. Although strap-style hook 340 of Figures 3A–3C is a flexible component rather than a more rigid component like hook 140 shown in Figures 1A–1C , both can be considered types of hooks. All of the embodiments, whether rigid or flexible, can be considered to have a hook-like structure when serving the function of attaching the hat holder to another object. Petitioner’s proposed construction would render the term “hook” meaningless, as various types of structures could be used to attach the hat holder to another object, that would not reasonably be considered to be a “hook.” For example, a snap, safety pin, ring, or button could be used to attach a hat holder to another object. Petitioner’s identification of different embodiments in the ’047 patent of hook-like structures does not show why one of skill in the art would consider almost any structure to be considered a “hook.” We, therefore, reject Petitioner’s construction of a “hook” as a “structure that serves to attach the hat holder to another object.” “wherein the first strap and the second strap are configured to retain a” slip op. at 12

  Patent outcomesUS 10,413,047 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,413,047
• Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentable
  PTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision

  Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17

  • Strike new argumentNew argument disregardedDecided for patent owner

    “In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22

  Patent outcomesUS 11,333,007 mixed
  Claim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites Graham
  Patents in suitUS 11,333,007
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentable
  PTAB · Dec 2, 2025 · IPR2024-01052 · APJ Brian D Range · IPR · Final written decision

  Claims 1, 2, 7–12, and 17–20 are unpatentable as obvious; claims 3–6 and 13–16 were not shown unpatentable because the asserted Watanabe combinations were unsupported.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–38). Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute and applies Petitioner’s proposed level of skill. PO Resp. 6. We find that Petitioner’s proposal is reasonable and consistent with the ’832 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). Thus, we apply Petitioner’s proposal in our analysis.” slip op. at 13

  • Prior constructionPrior construction adoptedDecided for petitioner

    “In our Institution Decision, we construed “determin[ing] a viewing window for the visual content as a function of progress through the progress length” as “requiring determining a viewing window for different times of the video.” Inst. Dec. 21. Neither party disputes this construction. PO Resp. 7; Pet. Reply 1–7. We maintain this same construction.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Thomason are in the same field of endeavor. Thomason describes a camera and method for correctly orientating pictures from the camera. See, e.g., Ex. 1004 ¶¶ 1, 2 29–40, Figs. 3a–3b. In particular, Thomason is interested in rotating and cropping images to reduce the effect of poor orientation. Pet. 9 (citing Ex. 1004 ¶¶ 2, 34, 36). Pacurariu likewise describes aligning and resizing/cropping of a captured image to correct poor orientation. See, e.g., Ex. 1005 ¶¶ 1, 3, 45–56, Figs. 5A–5C. The preponderance of the evidence also supports that a person having ordinary skill in the art would have had reason to combine the Pacurariu’s teachings with Thomason to predictably improve Thomason. Thomason teaches correct rotation of video data and makes use of rotation sensor to correct rotated images. Pet. 19–21 (citing, e.g., Ex. 1004 ¶¶ 4, 27, 29, 35; Ex. 1002 ¶¶ 76–77). Pacurariu similarly uses sensors and measures tilt angle of the camera. Id at 21–22 (citing, e.g., Ex. 1005 ¶¶ 51–52, Fig. 6; Ex. 1002 ¶ 78). Pacurariu further teaches that its tilt data angle can be stored for each “video frame.” Id. at 22 (citing Ex. 1005 ¶ 52). Petitioner, with support from credible testimony of Dr. Katsaggelos, explains how the teachings of Thomason and Pacurariu could be successfully combined. Id. at 23 (citing, for example, Ex. 1002 ¶ 81). A person of ordinary skill in the art could have known that Thomason’s system could be improved by saving rotation data for each video frame and correcting images on a frame-by-frame basis. Id. at 23–24. The testimony of Dr. Katsaggelos is credible in this regard. Ex. 1002 ¶¶ 80–81. Petitioner and Dr. Katsaggelos explain the references’ teachings and, based on these teachings, assert that a person having skill in the art would have had reason to combine with reasonable expectation of success based on those teachings. Reason to combine may properly come from the references themselves. KSR Int’l Co., 550 U.S. at 418 (explaining reason to combine may come from “interrelated teachings of multiple patents”). Based on the evidence presented, Petitioner establishes by a preponderance of the evidence that a person having ordinary skill in the art would have had reason to combine the teachings of Thomason and Pacurariu with a reasonable expectation of success. Ex. 1002 ¶¶ 76–81, 89–92; Ex. 1004 ¶¶ 4, 8–9, 27, 29, 35; Ex. 1005 ¶¶ 26, 41, 46, 51–52, 55–57, Figs. 6, 7.” slip op. at 27

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for patent owner

    “evaluating nexus between the claimed invention and objective evidence of nonobviousness, also referred to as secondary considerations. Lectrosonics, Inc. v. Zaxcom, Inc., IPR2018-01129, Paper 33 at 33 (PTAB Jan. 24, 2020) (precedential). We first consider whether Patent Owner has demonstrated “that its products are coextensive (or nearly coextensive) with the challenged claims,” resulting in a rebuttable presumption of nexus. Id. at 33. If not, that “does not end the inquiry into secondary considerations”; “the patent owner is still afforded an opportunity to prove nexus by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. (quoting Fox Factory, 944 F.3d at 1373–75).” slip op. at 62

  Patent outcomesUS 11,336,832 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,336,832
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentable
  PTAB · Nov 26, 2025 · IPR2024-00984 · APJ Nabeel U Khan · IPR · Final written decision

  Claims 6 and 7 are unpatentable as obvious over Meulen and Chao; claim 1 was not shown unpatentable because Meulen does not disclose transforming an image captured by its camera.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner argues that a person of ordinary skill in the art in the relevant field “would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras,” or alternatively “would have four years of experience working on image or video processing, or digital cameras.” Pet. 6. Petitioner further argues that an “advanced graduate degree” may “make up for the work experience.” Id. (citing Ex. 1002 ¶¶ 33–34). “Patent Owner applies Petitioner’s proposed level of skill.” PO Resp. 4–5 (citing Ex. 2027 ¶¶ 19–20). We adopt Petitioner’s proposed level of ordinary skill because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’413 patent and the cited prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “From the outset we note that the words of the claim recite “non- uniformly shift[ing] the pixels” and do not recite a “non-linear” transformation. This favors Petitioner’s position, which is based directly off the definition of “non-uniform,” over Patent Owner’s position, which substitutes “non-linear” for “non-uniform.” Generally, then, we would determine the ordinary and customary meaning of the claim term in the context of the entire Specification. Here, however, the ʼ413 patent does not mention “uniform” or “non-uniform” shifting of pixels anywhere except in the claims. The Specification, therefore, provides limited guidance, by itself, as to the ordinary and customary meaning of the term. Nonetheless, even reviewing the portions of the Specification cited by the parties, we see no clear or unambiguous effort to limit the challenged claims to require only non-linear transformations in which the pixels to which a transformation is applied do not have the same amount of shift. is not non-linear. Pet. Reply 1. Specifically, Petitioner argues that the center circle of Figure 2B maintains the original circular shape after the transformation is applied to the image which contradicts Patent Owner’s argument that no two pixels will have the same amount of shift. Pet. Reply 1–2. We agree. In Figure 2B of the ʼ413 patent, the center of the image is chosen to be the region of interest. Ex. 1001, 4:19–21. After the input image goes through linear scaling (step 204) and then non-linear warping (step 206) the circles become more vertically compressed as they approach the top and bottom edges and more horizontally stretched as they approach the left and right edges. Id. at 4:22–30. But “the center circle is fully corrected so that it maintains the original circular shape of the corresponding circle in the input image 212.” Id. at 4:23–25. This means that at least some pixels, such as those of the center circle, undergo the same amount of shift after being transformed.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “readable instructions” of claims 1 and 2 must occur in a particular order. Specifically, Patent Owner argues that the step of “determine a portion within the input image” must occur after “obtain[ing] an image” and before “apply[ing] a transformation to the input image.” PO Resp. 17 (citing Ex. 2027 ¶ 59). Petitioner argues, on the other hand, that the specification does not require such an order and, in fact, describes an embodiment where such an order is not followed. Pet. 3. We determine that the “determine a portion within the input image” step does not need to occur after the “obtain an image” step and before the “apply a transformation to the input image” step. As Patent Owner itself points out, claims 1 and 2 are apparatus and system claims respectively, and an ordering of the limitations of such claims is not necessary. PO Resp. 17. Even if we were to treat the apparatus and system claims as reciting the steps of a method, “as a general rule the claim is not limited to performance of the steps in the order recited, unless the claim explicitly or implicitly requires a specific order.” Baldwin Graphic Systems, Inc. v. Siebert, Inc., 512 F.3d 1338, 1345 (Fed. Cir. 2008) (citing Interactive Gift Express, Inc. v. Compuserve Inc., 256 F.3d 1323, 1342–43 (Fed. Cir. 2001)). We see nothing in the claims that would cause us to break this general rule. Patent Owner argues that the claims imply a “specific order because the ‘determine a portion’ requirement operates on ‘the [obtained] input image’ and defines the ‘portion’ that is necessary for the 23; Ex. 2027 ¶ 59). Although the steps are recited in a specific order in the claim, as they necessarily must be, the claim does not expressly specify that the certain steps must occur before or after other instructions, nor does logic imply such a requirement. For example, if certain characteristics of the image are known before the image is obtained (e.g. the size, dimensions, resolution, aspect ratio, or content etc.) the determination of the portion of the image could be made before the image is obtained. These characteristics may be based on the specific device taking the image or the subject matter of the image, both of which may be known before the image is captured or obtained. It is, therefore, not necessary that the image be obtained in order for a portion of the image to be determined. Similarly, we do not find the written description to expressly or implicitly specify an order the claimed step of “determine a portion of the input image.” For example, the written description of the ʼ413 patent states that in Figure 2B “the center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction as the frame boundary is approached.” Ex. 1001, 4:19–22. Patent Owner emphasizes that this disclosure implies that an input image is obtained before the center portion is chosen. PO Resp. 19 (citing Ex. 1001, 3:63–64, 4:19–22). But the description of this embodiment does not expressly recite an order. For example, the description of Figure 2A explains that “an input image is obtained” in step 202, “the image is then scaled” in step 204, and a “non-linear warping is then applied” in step 206. Ex. 1001, 3:63–4:3. This description does not mention “determin[ing] of a portion of the image” as a separate step or as part of the listed steps, and therefore, does not specify an order in which this step must occur. is configured so that some areas of the image are fully corrected geometrically, while some other areas are distorted. . . . [T]he center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction.” Id. at 4:17–19. This excerpt from the ʼ413 patent, which the Patent Owner specifically relies on (PO Resp. 19), also does not specify an order in which the determination step (choosing of the region of interest) takes place. Moreover, because the ʼ413 patent states that the warp module is configured so that some areas are fully corrected while others are not, the determination step could take place at the time the warp module was configured, presumably before the image was obtained. Finally, the ʼ413 patent states that “in the case, of video, the area may dynamically change between images (e.g. to follow a moving object).” Ex. 1001, 4:34–36. Patent Owner argues that this description “requires first obtaining the image in order to locate the object that is being followed.” PO Resp. 19–20. This embodiment is related to the case of video or a moving object, which the challenged claims do not mention. We, therefore, decline to limit the scope of the claim based on this embodiment. Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2005) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Having reviewed the parties’ arguments and cited evidence we determine Petitioner has established, by a preponderance of the evidence, that a POSITA would have been motivated to combine Meulen and Chao. For example, Petitioner argues that “[i]t would have been obvious that when performing image scaling, pixels from the input to output positions are shifted based on a scaling factor.” Pet. 91. Meulen teaches scaling but does not provide the details regarding scaling. E.g., Ex. 1007, 1:55–56, 4:37–49. We agree that in light of Meulen’s disclosure of scaling, a POSITA would have looked to other references, such as Chao, for further details on how to perform scaling. Dr. Katsaggelos provides credible support, testifying that “Meulen mentions ‘compression and/or scaling,’ and provides details on how to perform compression. But Meulen does not disclose the details of how to perform scaling. A POSITA when faced with Meulen and having the knowledge about scaling would have been motivated to turn to a prior art reference that discloses the details of scaling.” Ex. 1002 ¶ 262. Patent Owner argues that Petitioner provides no motivation to combine other than asserting that it involves combining prior art elements. PO Resp. 35 (quoting Pet. 92). As explained above, however, Petitioner does more than just assert that the motivation involves combining prior art elements. Instead, Petitioner explains that Meulen discusses both compression and scaling, and provides details regarding compression but does not provide details on how to scale. Pet. 91–92; Ex. 1002 ¶¶ 262–262. Thus, Meulen teaches that scaling was a known technique. See Hybritech, (“a patent need not teach, and preferably omits, what is well known in the art”). Dr. Katsaggelos testifies that, in this situation, a POSITA would have looked to Chao for details regarding scaling. Ex. 1002 ¶¶ 262–263. We determine this establishes, by a preponderance of the evidence, that a POSITA would have had reason to combine Meulen’s teachings with Chao. Patent Owner draws a distinction between Meulen and Chao, arguing that “Meulen is concerned with modifying content from a media source to be displayed on a device’s screen while Chao, by contrast, is directed to changing the aspect ratio of a document intended for printing.” Id. at 36 (citing Ex. 2027 ¶¶ 89–90). Patent Owner’s argument is contradicted, however, by Chao’s disclosure which states that “after all the background and foreground elements in the image have been resized . . . [t]he image may be output by displaying the image on or as part of: a display screen such as a computer monitor, camera screen, printer screen, printed page, projected image, or the like.” Ex. 1008 ¶ 32. Patent Owner argues that Meulen’s system avoids distortion near the middle where the user’s focus is more likely to be, while Chao, on the other hand, is directed to avoiding distortion of stylized borders on differently sized pages. PO Resp. 36–37 (citing Ex. 1006, 1:26–29; Ex. 1008 ¶¶ 1, 25; Ex. 2027 ¶¶ 91–92). This argument reads the prior art too narrowly and does not address Petitioner’s combination. Petitioner does not rely on Chao for its teaching of avoiding distortion near the borders of the image, but rather on its teaching of scaling the image while maintaining the design intent of the original image. Ex. 1008 ¶ 22; Ex. 1014 ¶ 67. Thus, Petitioner is applying Chao’s techniques of scaling (regardless of where the area of 92. Finally, Patent Owner argues that Chao’s approach of stretching/shrinking only the background and uniformly scaling entire foreground objects is suitable for graphic design but incompatible with Meulen which is concerned with adapting externally derived media source content for display on a fixed size screen. PO Resp. 37–38 (citing Ex. 2027 ¶ 93). We disagree with Patent Owner’s argument because it does not address Petitioner’s combination. Petitioner relies on Chao’s teaching of stretching/shrinking of background elements and applies that stretching/shrinking to Meulen’s images displayed on its screen. Pet. 91–92 (citing Ex. 1008 ¶¶ 28, 63; Ex. 1002 ¶ 263). The fact that Chao applies its teaching to graphic design does not prevent a POSITA from applying those teachings to Meulen’s media content displayed on its screen.” slip op. at 20

  Patent outcomesUS 10,015,413 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,015,413
• Apple Inc. v. Resonant Systems, Inc.Some claims unpatentable
  PTAB · Oct 9, 2025 · IPR2024-00806 · APJ Norman H Beamer · IPR · Final written decision

  Claims 1–8, 15–17, and 20 are unpatentable under § 103; claims 14 and 19 were not shown unpatentable because the proposed paramagnetic flux paths in Wakuda lacked adequate support.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner’s expert declarant contends that person of ordinary skill in the art (POSITA) would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the advanced-level degree. Ex. 1003 ¶ 33. Patent Owner offers “a similar level of ordinary skill in the art.” PO Resp. 3. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’830 patent specification.” slip op. at 11

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner

    “The parties agree that independent claims 1, 19, and 20 include means plus function limitations under 35 U.S.C. § 112 ¶ 6.8 Pet. 3–7; PO Resp. 6–14. An element in a claim for a combination may be expressed as a means . . . for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. 35 U.S.C. § 112 ¶ 6. In particular, the parties agree that the “driving component” and “control component” requirements of independent claims 1, 19, and 20 are means plus function limitations. Pet. 3–7; PO Resp. 6–14. Construing a means plus function limitation under 35 U.S.C. § 112 ¶ 6 involves two steps: 1) identifying the claimed function and 2) identifying in the specification the corresponding structure that performs the claimed function. Med. Instrumentation & Diagnostics Corp. v. Elekta AB, 344 F.3d 1205, 1210 (Fed. Cir. 2003); Cardiac Pacemakers, Inc. v. St. Jude Med., Inc., 296 F.3d 1106, 1119 (Fed. Cir. 2002).” slip op. at 12

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed board ownDecided for petitioner

    “Therefore, the specification clearly links the function of “control[ing] supply of power from the power supply to . . . cause the moveable component to oscillate at a frequency . . . specified by one or more stored values” at least to portions of steps 706 and 708 of the flow diagram algorithm of Figure 7A, as described above. Thus, the control component requires a microprocessor and memory with algorithmic structure including a timing algorithm or similar coding for creating a control output signal that flips to control the direction of current flow through a coil (e.g., coil 514, Fig. 5, coil 626, Fig. 6), where the coil is structure that corresponds to the recited “driving component,” as noted above.11 We adopt the District Court’s conclusion in the Apple litigation that the “control component” structure itself does not require an H-bridge switch, but only requires that the processor generates the “d” inputs to the switch; and further that the structure does not require does not require computing initial default values as specified in step 702 of Figure 7A (i.e., values not specified by a user). Ex. 3001, 30–33, 35. This is in accord with settled law 11 “Rather than using a formal timer mechanism, certain implementations may simply employ counted loops or other simple programming techniques for periodically carrying out tasks.” Ex. 1001, 7:17–20. that limits the structure to that necessary to perform the claimed function. 12 By the same token, we modify the District Court’s construction to the extent it would require, based on such steps as 706, 710, and 716, a specific order of the steps of generating the “p” and “d” values. The claims only require the control component to control the power supply to cause oscillation at a specified frequency and amplitude, but do not require the frequency value to be generated before the amplitude value, or vice versa.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “to include the ability disclosed in Ramsay to allow a user to customize and store parameters associated with haptic effects, such as creating “haptic track files” that specify variations in the amplitude and frequency of the effect over time to achieve a desired effect. Pet. 46–47 (citing Ex. 1006 ¶¶ 15, 25– 28, 37; Ex. 1003 ¶¶ 192–193). Petitioner argues that this combination would have been motivated by the desire to expand the functionalities of haptic devices to allow end users to create and customize haptic effects, to provide a fuller haptic experience, and to be able to store haptic effects to save processing power compared to real-time generated effects. Id. at 47–49 (citing Ex. 1006 ¶¶ 14–15, 30, 47, 53–57; Ex. 1003 ¶¶ 194–196). Petitioner argues that this making combination would have had a reasonable expectation of success given that both references deal with linear actuators, both disclose storing frequency and amplitude values, and the combination involves routine knowledge of software techniques. Id. at 49–50 (citing Ex. 1004, 2:3–9; Ex. 1006 ¶¶ 17, 26–28; Ex. 1003 ¶¶ 197–198). Petitioner further argues that it would have been obvious to use the H-bridge switch of Rossi as part of the Gregorio actuator drive circuit 16 in the asserted Gregorio-Ramsay combination to periodically switch the polarity of drive signals to electric coil 28 of Gregorio, and thus oscillate magnet 27, under the control of a signal from processor 12 of Gregorio. Pet. 56 (citing Ex. 1003 ¶ 211). Petitioner argues that this combination would have been motivated because Gregorio does not disclose implementation details and therefore one of ordinary skill would have looked toward teachings like Rossi to fill in those details, and that an H-bridge switch was a well-known example circuit for implementing a change in “current flow direction/polarity” for “push” and “pull” actions in a system, and was a simple, cost-effective, and reliable circuit design. Id. at 56–58 (citing Ex. 1020, Abstr., Figs. 4, 6, 1:65–3:54; Ex. 1003 ¶¶ 212–217). Petitioner argues that making this combination would have had a reasonable expectation of success given that it involved known techniques through routine circuit design considerations and software instructions for generating the control signal. Id. at 58 (citing Ex. 1003 ¶ 218). Petitioner further argues that it would have been obvious to modify the Gregorio-Ramsay-Rossi combination, using the control algorithm disclosed in Aldrich, to replace the monitoring technique of Gregorio with that of Aldrich to maintain a resonance frequency by incrementing or decrementing the drive frequency. Pet. 58–59 (citing Ex. 1004, 4:22–28, 4:42–48; Ex. 1021, 2; Ex. 1003 ¶ 219). Petitioner’s expert provides implementation details of Aldrich, including that the Aldrich hill-climb technique would use a Boolean value to indicate whether the frequency was being increased, with local variables set to default values, and use integer values when processing sensor signals. Id. at 59–60 (citing Ex. 1021, 2; Ex. 1003 ¶¶ 220–222). Petitioner argues that these modifications would have been motivated to improve the Gregorio system using the Aldrich feedback algorithm for targeting a resonant frequency, given that the Gregorio approach had shortcomings that required a monitoring period with reduced haptic feedback, receiving weak EMF signals. Id. at 61–62 (citing Ex. 2004, 3:65–5:55, 5:63–65; Ex. 1021, 1–3; Ex. 1003 ¶¶ 223–227). Petitioner argues that making this combination would have had a reasonable expectation of success given that it involved known techniques for improvement to yield predictable results, readily implemented via software executed by the microprocessor. Id. at 62–63 (citing Ex. 2004, 2:44–50; Ex. 1021, 2; Ex. 1003 ¶ 229). Patent Owner does not address Petitioner’s arguments regarding the” slip op. at 27

  Patent outcomesUS 9,941,830 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,941,830
• Tesla, Inc. v. Iqar Inc.Some claims unpatentable
  PTAB · Jul 25, 2025 · IPR2024-00545 · APJ Sean P O’Hanlon · IPR · Final written decision

  Claims 1–6, 8–15, 17, and 18 are unpatentable as obvious over Neiss or Neiss and Hirasago; claims 7 and 16 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person having ordinary skill in the art at the time of the invention (“POSITA”) would have had “a bachelor’s degree in electrical engineering, computer engineering, mechanical engineering (including automotive engineering), civil engineering (transportation systems), physics, or a related field, and at least four years of experience (or the academic equivalent) in the field of transportation systems.” Pet. 2–3. Petitioner contends that “[a]dditional education could substitute for professional experience, and vice versa.” Id. at 3 (citing Ex. 1003 ¶¶ 1–19, 24–26; Ex. 1004). Patent Owner “does not dispute” Petitioner’s definition of the level of ordinary skill. See generally PO Resp. We find Petitioner’s definition to be consistent with the problems and solutions disclosed in the patent and prior art of record, and adopt it as our own for purposes of this Decision. See, e.g., In re GPAC, 57 F.3d at 1579 (approving the determination of the level of ordinary skill in the art by appeal to the references of record).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “We disagree with Patent Owner’s interpretation of column 13, lines 40–44 of the ’161 patent to mean that a route may not have both an ending position or an intermediate position, but will have at least one of these positions. See PO Resp. 21. Patent Owner interprets “typically” in “[t]he route used by the power management device typically includes a starting position . . . , an ending position, . . . , and any intermediate positions between the initial and the final positions” to apply to either “an ending position” or “any intermediate positions” (that is, an intermediate destination) but not to both. We see no grammatical reason to limit “typically” in this manner. Rather, the plain meaning of the quoted sentence suggests that, although not typical, a route may not contain an ending position, be that a final position or an intermediate position.” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Petitioner has not explained adequately how a driver’s previously driven speed or the speed limit is an efficient speed. Rather than explaining how the Schramm-Clapper system would sum efficient speeds, Petitioner merely asserts that “the set speeds for the energy-optimum route’s segments correspond to a plurality of efficient speeds.” Pet. 78 (emphasis omitted). Petitioner’s witness, Dr. Papanikolopoulos, makes substantially the same assertion. See Ex. 1003 ¶ 263. But neither Petitioner nor its witness explains adequately how a previously driven speed or the speed limit is an efficient speed. Patent Owner presents persuasive arguments as to why these speeds are not efficient. See PO Resp. 32–33 (citing Ex. 2003 ¶¶ 198–204, 208–214). Patent Owner’s contentions are supported by Dr. Hoff’s testimony. See, e.g., Ex. 2003 ¶¶ 211–218. Stated differently, although Petitioner explains how the Schramm-Clapper system would select the best summation of calculated energy values required to travel at selected speeds from among Schramm’s routes, Petitioner has not explained sufficiently how the selected speeds are efficient speeds. For the foregoing reasons, on this record, Petitioner has not shown, by a preponderance of the evidence, that claim 1 or its dependent claims 3 and 6–9 would have been obvious in view of the combination of Schramm and Clapper. Petitioner relies on the same contentions regarding the identical language recited in independent claim 10 (see Pet. 93), and so, for the same reasons, has failed to show, by a preponderance of the evidence, that claim 10 or its dependent claims 12, 13, and 15–18 would have been obvious in view of the combination of Schramm and Clapper.” slip op. at 36

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “We agree with Patent Owner that Petitioner has not explained adequately how a driver’s previously driven speed or the speed limit is an efficient speed. Rather than explaining how the Schramm-Clapper system would sum efficient speeds, Petitioner merely asserts that “the set speeds for the energy-optimum route’s segments correspond to a plurality of efficient speeds.” Pet. 78 (emphasis omitted). Petitioner’s witness, Dr. Papanikolopoulos, makes substantially the same assertion. See Ex. 1003 ¶ 263. But neither Petitioner nor its witness explains adequately how a previously driven speed or the speed limit is an efficient speed. Patent Owner presents persuasive arguments as to why these speeds are not efficient. See PO Resp. 32–33 (citing Ex. 2003 ¶¶ 198–204, 208–214). Patent Owner’s contentions are supported by Dr. Hoff’s testimony. See, e.g., Ex. 2003 ¶¶ 211–218. Stated differently, although Petitioner explains how the Schramm-Clapper system would select the best summation of calculated energy values required to travel at selected speeds from among Schramm’s routes, Petitioner has not explained sufficiently how the selected speeds are efficient speeds.” slip op. at 36

  Patent outcomesUS 8,972,161 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 8,972,161
• Tesla, Inc. v. Iqar Inc.Some claims unpatentable
  PTAB · Jul 21, 2025 · IPR2024-00543 · APJ Sean P O’Hanlon · IPR · Final written decision

  Claims 1–7, 9–17, 19, and 20 are unpatentable as obvious; claims 8 and 18 were not shown unpatentable because Newstrom’s database was not shown to be remote.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for petitioner

    “Patent Owner does not contest Dr. Morellas’s proposed definition or proffer a definition of its own. See generally PO Resp.; see also Ex. 2007 ¶ 43 (setting forth a substantially similar definition as Dr. Morellas). We find Dr. Morellas’s unopposed definition to be consistent with the problems and solutions disclosed in the patent and prior art of record, and adopt it as our own for purposes of this Decision. See, e.g., In re GPAC, 57 F.3d at 1579 (approving the determination of the level of ordinary skill in the art by appeal to the references of record).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for patent owner

    “We disagree with Patent Owner’s assertion that claim 1 requires that a route from the vehicle’s current position to a final destination must be known. See PO Resp. 7. Initially, claim 1 does not recite “destination.” Instead, claim 1 recites only “determining a segment of a vehicle route.” Ex. 1001, 27:44 (emphasis added). Nor does the ’399 patent specification require the interpretation proffered by Patent Owner. Notably, the ’399 patent discloses that the power management device may rely on historical route information to optimize the energy used to travel each segment of a route. Ex. 1001, 17:39–43, 17:64–67. Such reliance on historical data beneficially reduces the amount of required computing power. Id. at 18:5–9. Under this approach, “the location of the vehicle is periodically determined” and “used to determine[] a historical segment corresponding to the current location.” Id. at 18:30–33 (emphasis added). If the vehicle has moved into a new route segment, the historical data is queried to determine the most efficient speed to travel for the current segment. Id. at 18:39–56. Thus, the ’399 patent explicitly discloses calculating and applying power to a vehicle based on the route segment in which the vehicle is currently traveling. See id. at 18:64–67 (“The flowchart shown in FIG. 5 illustrates a continuous process, in which the power management device can determine a probable optimal speed as the current segment changes (e.g., as the vehicle moves).”), Fig. 5. Furthermore, the ’399 patent explains that “[t]he route used by the power management device typically includes a starting position . . . , an ending position, . . . , and any intermediate positions between the initial and the final positions.” Id. at 14:6–10 (emphasis added). Notably, the ’399 patent sometimes refers to the “entire route,” indicating that use of “route” in the claims does not necessarily mean the entire route. Indeed, the ’399 patent explains that, “[i]n some variations, the entire route (or the entire predicted route) may be divided up into N segments” and “[i]n some variations, probable optimal speeds may be identified for the entire route.” Ex. 1001, 14:38–39, 19:1–2 (emphases added). This strongly suggests that, in some other variations, the entire route is not divided into segments and optimal speeds are not identified for the entire route, further indicating that the recited “route” is not the entire path the vehicle will take. Therefore, we find that the ’399 patent contemplates routes that, although not typical, do not include an ending position. Moreover, to the extent a destination is required, the ’399 patent discloses that the destination can be derived based on the vehicle’s location or driving history, and there can be multiple “likely destinations” and the system can “continuously infer the vehicle’s destination” and the probable destination “may constantly change to revise the destination” while the vehicle is traveling along the route. Ex. 1001, 12:16–59. Contrary to Patent Owner’s arguments, neither the claim language nor the specification of the ’399 patent requires the route be predetermined or extend from the vehicle’s current position to a final destination.” slip op. at 16

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “have been obvious in view of Hongo, Obradovich, and Niki. Pet. 4–62. In support of its showing, Petitioner relies upon the Morellas Declaration. Id. (citing Ex. 1003). We have reviewed the parties’ briefs and the evidence of record and determine that, for the reasons explained below, Petitioner has shown, by a preponderance of the evidence, that claims 1, 2, 5, 6, 9–12, 15, 16, 19, and 20 would have been obvious in view of Hongo, Obradovich, and Niki and that Petitioner has set forth reasoning with rational underpinning why it would have been obvious to combine the teachings of these references.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “limiting, Hongo and Niki support Petitioner’s contentions. We determine that Petitioner sets forth reasoning with rational underpinning as to why a person having ordinary skill in the art would have combined the teachings of Hongo and Niki. See, e.g., Pet. 21–23 (arguing that the modification “would have involved choosing from a finite number of identified, predictable solutions, with a reasonable expectation of success” and “Niki’s teachings and/or suggestions improve vehicle control in the Hongo vehicle”).” slip op. at 14

  Patent outcomesUS 10,882,399 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,882,399
• Apple Inc. v. RJ Technology LLCSome claims unpatentable
  PTAB · Feb 18, 2025 · IPR2023-01350 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 5–10 are unpatentable as obvious; claims 11–14 were not shown unpatentable because the evidence did not establish the claimed capacity retention after 400 cycles.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends a person of ordinary skill in the art “would have held a Bachelor’s degree in chemistry or chemical engineering, with at least 4 years of experience in cell design, electrochemical techniques, and battery materials development.” Pet. 4. Petitioner further contends that a “Master’s Degree can substitute[] for some of the relevant experience,” and “[e]quivalent training with battery specific experience can accommodate other degreed fields.” Id. 9 The parties here do not address objective evidence of nonobviousness. Patent Owner does not dispute Petitioner’s definition of the ordinarily skilled artisan. PO Resp. 20. We adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the ’641 patent, the prior art of record, and the parties’ arguments.” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The parties agree that the term “charge cut-off voltage” is “the maximum voltage to which the battery is configured to be charged.” PO Resp 21–22; Pet. Reply 1. The parties dispute, however, whether the “charge cut-off voltage” is a “battery property” or “the voltage applied to the battery during charging.” PO Resp. 21–24; Pet. Reply 1–6. We need not resolve the precise meaning of “charge cut-off voltage” because there is no dispute that Yamaki discloses this limitation under either party’s interpretation of the claim term. Upon review of the prior art and the parties’ arguments, we determine that no terms of the ’641 patent require express construction. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))); Pet. Reply 1 (asserting that the challenged claims are unpatentable under either parties’ construction of “charge cut-off voltage”).” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “Patent Owner’s arguments do not persuasively undermine Petitioner’s position. Sakamoto expressly discloses setting the ratio of negative to positive electrode active material in the range of 1.05 to 1.30. Ex. 1005 ¶ 8. Sakamoto also explains why this range is preferable, i.e., if the ratio is roughly equal “the charge-discharge cycle performance is insufficient due to significant deterioration from charging and discharging,” and if the ratio is 10 Citations to the prosecution history of Yamaki are to the page numbers added to the lower right corner of the document. too high “too much of the compound does not participate in charging and discharging.” Id. ¶¶ 6, 8. These disclosures are sufficient to explain why one of ordinary skill in the art would have found it obvious to select the ratios disclosed in Sakamoto in Yamaki. Id. ¶ 8 (providing a secondary battery with a capacity ratio between 1.05 and 1.30 and noting that by setting the ratio within this range the resulting secondary lithium battery is “safe due to low risk of heat being generated and an explosion occurring”). We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 15

  Patent outcomesUS 7,749,641 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,749,641
• Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentable
  PTAB · Jan 17, 2025 · IPR2024-00597 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9–10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We also agree with Patent Owner that the charge cut-off voltage is not necessarily the applied voltage during charging. PO Resp. 20. Rather, depending on the charging protocol used and when in the charging cycle the voltage is applied, the applied voltage could be higher than the battery voltage. Ex. 2013; Ex. 2006 ¶ 91. For example, as discussed in more detail below with respect to the Uemura grounds, when fast charging using constant current is used and the charging rate is not slow, the applied voltage will be higher than the battery voltage when the constant current charging phase is stopped. Ex. 2006 ¶ 91; Ex. 2013. Likewise, during constant current/constant voltage charging, the applied voltage approximates the battery voltage only when the battery is nearly completely charged. Ex. 2013; Ex. 2006 ¶ 91. Thus, the applied voltage may be, but is not necessarily, the charge cut-off voltage. In view of the foregoing, we construe “charge cut-off voltage” in claims 1 and 5 as “the maximum value to which the battery is configured to be charged.” PO Resp. 18; Ex. 2008, 217:6–11; Pet. Reply 5. Contrary to Patent Owner’s arguments, however, we do not understand the phrase “configured to be charged” to necessarily represent a single voltage for the battery that is determined based on the structure and chemistry of the battery. Pet. Reply 4–5. Rather, the charge cut-off voltage is a selected potential, or voltage, of the battery or cell at the end of charging that is controlled by a circuit or device, such as a charger or control circuit within the battery. Ex. 1001, 9:50–55; Ex. 1048, 2, 7–8; Ex. 1008, 3:9–13. And, for the reasons discussed herein, the charge cut-off voltage may be, but is not necessarily, the same as the applied voltage during charging. PO Resp. 20.” slip op. at 15

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122.” slip op. at 21

  Patent outcomesUS 7,749,641 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,749,641

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.