- PTAB · Sep 19, 2025 · PGR2025-00025 · APJ Kimberly Mcgraw · PGR · Institution
The Board instituted PGR on claims 1–19 and all asserted grounds, finding it more likely than not that claim 1 is anticipated by the Gatorade Label.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Post-grant review is available for patents that issue from applications that at one point contained at least one claim with an effective filing date on or after March 16, 2013. See Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), §§ 3(n)(1), 6(f)(2)(A). After considering the briefing and the evidence of record, for the reasons set forth below, we determine that Petitioner has shown that the ’422 Patent is eligible for post-grant review and has shown it is more likely than not that at least one challenged claim of the ’422 Patent is unpatentable under § 324(a). Accordingly, we institute a post-grant review of the challenged claims of the ’422 Patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would possess at least (1) a Bachelor’s degree in chemistry or a related field, with (2) five years of experience in material identification and characterization using multiple analytical methods and field sampling, or equivalent research or professional experience.” Pet. 12 (citing Ex. 1014 ¶ 24). Patent Owner does not dispute Petitioner’s definition for one of ordinary skill in the art nor provide a proposed definition of its own. See generally Prelim. Resp. For the purposes of this Decision, we adopt Petitioner’s undisputed proposal regarding the level of one of ordinary skill in the art.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer foundDecided for patent owner
“336. The applicant explained that not all combinations of shrink films and light blocking materials are recyclable. Id. at 335. The applicant explained that films can be compatible with PET recycling in two ways, (1) the film can float in water and be separated from PET that sinks in water or (2) the PET films crystallize and “can be recovered with the PET stream.” Id. at 336 (citing “A Resource Document by the Association of Plastic Recyclers (APR)”) (found at Ex. 1002, 323–332) (emphasis omitted). The applicant explained that “removing the label before or during the recycling process is not evidence of the recyclability of the label” and that “[r]emoving the label during the recycling process is not equivalent to actually recycling the label.” Id. at 335. As such, a POSITA reading the prosecution history would understand that a label is not recyclable with a PET container, as recited by the independent claims, by removing the label from the PET recycle stream before or during the recycling process.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“To determine how a person skill in the art would determine if a shrink label is “recyclable” as recited in the independent claims, we look to how the Specification of the ’422 Patent describes or defines recyclable shrink labels. For example, the ’422 Patent states that PET shrink films are generally considered recyclable if no inks are retained on the film after a caustic wash cycle typically used in PET reclaiming processes. Ex. 1001, 6:61–65. The ’422 Patent further states that labels are fully recyclable if the polymers used are clear, preferably clear PET, and the labels include inks that can be washed off in a “typical PET recycling wash (caustic wash).” Id. at 11:44– 49; see also id. at 11:49–54 (describing embodiments in which the labels are free or substantially free of inks that cannot be washed off in a caustic wash or where the labels are free or substantially free of color plastics that cannot be recycled). The ’422 Patent further discusses “industry standards” for determining whether various embodiments of shrink labels are recyclable. See, e.g., id. at 11:29–53. For example, the Specification states that the “Association for Plastic Recyclers (APR) Critical Guidance Protocol for Clear PET Articles with Labels and Closures (PET-CG-02)” (Ex. 1005) can certify that a film is fully recyclable with a container or bottle. Id. at 11:34– 38. Additionally, the Specification states that labels “are recyclable according to the Evaluation of the Near Infrared (NIR) Sorting Potential of a Whole Plastic Article (SORT-B-01)” (Ex. 1010) and/or the “Evaluation of Sorting Potential for Plastic Articles Utilizing Metal, Metalized, or Metallic Printed Components (SORT-B-03)” (Ex. 1011). Ex. 1001, 11:39–44. The ’422 Patent further states that embodiments of the labels “are fully recyclable. For example, the labels may include inks that can be washed off in a typical PET recycling wash (caustic wash) and the polymers” are preferably clear PET. Id. at 11:44–48. The ’422 Patent thus provides various descriptions or standards to determine the recyclability of shrink labels. For the purposes of addressing the anticipation and obviousness grounds, we determine that any of these standards can be used to determine if a shrink label is “recyclable.” We note that our construction is preliminary and is based on the present record. We invite the parties to further the address the construction of “wherein the recyclable shrink label is recyclable with a PET container” during trial.” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · NautilusPatents in suitUS 11,961,422 - PTAB · Sep 9, 2025 · IPR2025-00389 · APJ Kevin W Cherry · IPR · Institution
The Board instituted IPR of claims 1–22 on all asserted grounds after finding a reasonable likelihood that at least one challenged claim would be shown unpatentable as obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute an inter partes review. The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The Supreme Court has held that the Board, in a decision to institute under 35 U.S.C. § 314(b), may not institute review on less than all claims challenged in the petition. SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1355–56 (2018). Moreover, in accordance with our rules, “[w]hen instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2025); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“contends that a person of ordinary skill in the art for the ’498 patent “would have had a Bachelor’s Degree in Physics or an Engineering field relevant to battery technology (e.g., Electrical or Mechanical Engineering) and at least two years of industry experience in lithium-ion battery manufacturing and/or design.” Pet. 3 (citing Ex. 1003 ¶¶ 27–30).” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner “does not believe any claim terms require specific construction.” Pet. 10–11. Patent Owner states “no claim construction is necessary to deny institution because Patent Owner’s arguments for denial do not rely on the outcome of an actual controversy about claim interpretation.” Prelim. Resp. 10. Having considered the record, we determine that no express claim construction is necessary for any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“Patent Owner may be correct that the invention Takemura discloses seeks to improve on the “conventional” design disclosed in Figures 8 and 9, and, as part of its description of its inventions, Takemura discloses a variety of benefits to its approach over the approach disclosed in Figures 8 and 9. However, that does not negate the teachings provided in Figures 8 and 9. “A reference must be considered for everything it teaches by way of technology and is not limited to the particular invention it is describing and attempting to protect.” EWP Corp. v. Reliance Universal Inc., 755 F.2d 898, 907 (Fed. Cir. 1985) (emphases in original). As Petitioner explains, Sato discloses the use of tape, but does not provide details regarding its precise size and placement. See Pet. 34–39. Petitioner relies on Takemura for teaching how such tape would be sized and placed. Id. Indeed, Takemura teaches that such a placement was used in “conventional” lithium-ion batteries at the time. “It’s not necessary to show that a combination is “the best option, only that it be a suitable option.” Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 800 (Fed. Cir. 2021) (quoting PAR Pharm., Inc. v. TWI Pharms., Inc., 773 F.3d 1186, 1197–98 (Fed. Cir. 2014)). Here, Petitioner only relies on Takemura for teaching how the tape disclosed in Sato would be sized and placed. Although Takemura might teach a different ultimate approach, that does not diminish Takemura’s teachings of a known size and placement that was conventionally used in the art. “[I]f a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR, 550 U.S. at 417. Thus, we are not persuaded, on the current record, that Takemura teaches away from the particular combination that has been proposed.” slip op. at 24
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,923,498 - Champion Laboratories, Inc. / First Brands Group, LLC v. Hengst SENo claims unpatentablePTAB · Sep 8, 2025 · IPR2024-00603 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1, 3, 5, 8–11, 15–17, 19, 23–25, and 28–30 were not shown unpatentable over Yokoyama, Yokoyama and Cline, or Honermann and Cline.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Because the level of ordinary skill in the art is not in dispute, and because the parties’ definition is consistent with the disclosures in the ʼ203 patent, the prior art, and the declaration testimony of Mr. Nranian and Dr. Basirat, we view the prior art and arguments through this lens when determining whether the claims are unpatentable as obvious over the prior art.5 See Graham, 383 U.S. at 17 (identifying “the level of ordinary skill in the pertinent art” as an underlying factual inquiry to be resolved in deciding obviousness, which is a question of law).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Although the parties spend significant portions of their briefing discussing the term “eccentric” and how it applies to certain figures from the ʼ203 patent and the relied-upon prior art, we determine that it is not necessary to expressly construe the term “eccentric” beyond the parties’ agreed-upon definition. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Expert testimonyPetitioner expert discountedDecided for patent owner
“(opining that “Patent Owner’s construction of ‘having an axis no located in a geometric center’ is too narrow”). Mr. Nranian’s Declaration testimony in this respect is not persuasive for several reasons. First, it is internally inconsistent. Compare Ex. 1016 ¶ 3 (criticizing the “axis” language in Patent Owner’s definition), with id. ¶¶ 9, 11 (relying on that very language to support an argument). Also, Mr. Nranian’s proposed definition of “eccentric” to merely mean “not located at the center” begs the question of what, precisely, is “the center”? Mr. Nranian does not persuasively explain how far a person of ordinary skill in the art would understand she could travel from the exact center point of an object and still be in “the center” of that object. See Tr. 10:13–19 (Judge McGee asking whether the center is “a miniscule point in the middle of [the] disc”); see also id. at 10:25–12:26 (Judge Weatherly highlighting the significant ambiguity in referring to something as in “the center”). Also, Mr. Nranian’s opinion is inconsistent with how the ʼ203 patent compares something that is “central,” i.e., “at the center,” and something that is “eccentrically” located. Ex. 1001, 7:13–14 (describing pipe nozzle 15 as “central”); id. at 8:53–56 (describing a “through hole” as “located in the center of the front panel 22” depicted in Figures 7 and 8); id. at 10:23–31 (describing return 12 as “in the center” and outlet 13 as “eccentrically thereto” in Figure 17). Patent Owner’s colorized and annotated Figure 7 is reproduced below: Patent Owner’s colorized and annotated version of Figure 7 of the ʼ203 patent illustrates “central pipe nozzle 15” in yellow passing through the “through hole” located in “the center” of front panel 22. PO Resp. 20. Significantly, pipe nozzle 15 and the through hole in panel 22 are both described as “central” and in “the center” but must have different diameters; otherwise, “central pipe nozzle 15” would not be capable of traveling through “through hole 22.” Ex. 1001, Fig. 7. Thus, the ʼ203 patent intrinsically bases whether an element is “central” or “in the center” on whether its axis is located at the geometric center. This is also illustrated in Figure 17 of the ʼ203 patent, reproduced below: Figure 17 of the ʼ203 patent illustrates filter housing 10 with return 12 “in the center . . . and, eccentrically thereto, the outlet 13 with the seat 14 for the blocking element 24.” Ex. 1001, 10:23–30. Finally, Mr. Nranian’s narrow interpretation of “eccentric”––which excludes the “having the axis or support so located” in the geometric center language––is at odds with the arguments it was proffered to support. Cf. Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”).” slip op. at 29
Patent outcomesUS 9,023,203 not shown unpatentableClaim construction§ 103 obviousnesscites GrahamPatents in suitUS 9,023,203 - PTAB · Aug 26, 2025 · IPR2025-00432 · APJ Kevin W Cherry · IPR · Institution
The Board instituted IPR of claims 1–19 on all asserted grounds after finding a reasonable likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute an inter partes review. The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The Supreme Court has held that the Board, in a decision to institute under 35 U.S.C. § 314(b), may not institute review on less than all claims challenged in the petition. SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1355–56 (2018). Moreover, in accordance with our rules, “[w]hen instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2020); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”). Applying those standards, and upon considering the Petition, the Preliminary Response, and the evidence of record, we determine the information presented a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’148 patent. Accordingly, we institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Relying on the declaration testimony of Dr. Gido, Petitioner contends that an ordinarily skilled artisan for the ’148 patent “would have had at least a bachelor’s degree or equivalent degree from an accredited institution in chemistry, chemical engineering, materials science, or a similar discipline covering relevant principles of organic and inorganic chemistry, polymer processing, ceramic materials, and ceramic processing” and “three or more years of experience in electrochemical energy storage devices, lithium-ion battery technology, separators, characterizations and analyses of particle size, film thickness, and/or materials compositions, battery performance characterization, or other applications of polymer chemistry, ceramic chemistry, and ceramic processing.” Pet. 14. Petitioner additionally contends “[m]ore education could substitute for less experience, and vice versa.” Id. (citing Ex. 1003 ¶ 17). Patent Owner “adopts the definition proposed by the Petitioner.” Prelim. Resp. 14. Based on this record, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’148 patent and the asserted prior art, and we apply it in our obviousness evaluations below. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art, itself, can reflect appropriate level of ordinary skill in art). We note that our decision would be the same applying either party’s definition of a person of ordinary skill in the art.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim terms require express construction.” Pet. 14–15. Patent Owner does not at this time address claim construction. See Prelim. Resp. 14–15. Having considered the record, we determine that no express claim construction is necessary for any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). We note, however, there may be some claim terms below whose constructions that the parties may wish to address during trial.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Petitioner has shown sufficiently that there would be a motivation to combine Murakami and Beard with a reasonable expectation of success. As Petitioner explains, Beard teaches particular benefits of its porous structure that a person of ordinary skill in the art would be motivated to combine with the teachings of Murakami. See Pet. 54–56. At this stage, Patent Owner’s counterarguments do not undermine this showing. To begin with, we note that Patent Owner appears to mischaracterize the combination as incorporating Beard’s cell structure into Murakami, when it is merely to incorporate Beard’s technique of closely packing inorganic particles in the cell walls into Murkami. Thus, at this stage and on the current record, Patent Owner’s arguments about alleged incompatibilities between Beard’s and Murakami’s particle size distributions, amounts of binder, and binding and dispersion processes are not persuasive. As for the contentions regarding Figure 2, we note that Petitioner does not rely on Figure 2, which appears to include the incorporation of fibers. Thus, it is unclear why the pore structure of Figure 2 would be relevant to the combination that Petitioner proposes. Finally, we find that Petitioner has shown sufficiently, on this record, that Petitioner has shown a reasonable expectation of success. As Petitioner and its expert explain, Beard and Murakami teach similar manufacturing techniques (which are also similar to the ’148 patent), and Beard and Murakami provide ample detail on how to implement their techniques. See Ex. 1003 ¶¶ 167–172; Ex. 1010 ¶¶ 57–60; Ex. 1005 ¶¶ 71–72. We find this level of detail adequate, at this stage, to show that a person of ordinary skill would have a reasonable expectation of success in making the combination. See Pfizer Inc. v. Apotex, Inc., 480 F.3d 1348, 1365 (Fed. Cir. 2007) (noting that “the expectation of success need only be reasonable, not absolute”).” slip op. at 37
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,575,148 - Zhuhai Cosmx Battery Co., Ltd. v. Ninge Amperex Technology LimitedInstitution deniedPTAB · Aug 20, 2025 · IPR2025-00385 · APJ Debra L Dennett · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–10 were anticipated by Nishikawa or obvious over the asserted combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review under 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” For the reasons set forth below, upon considering the Petition and Preliminary Response, we determine that Petitioner has not established a reasonable likelihood of prevailing with respect to at least one challenged claim. Accordingly, we deny the Petition and decline to institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“Petitioner contends that A person of ordinary skill in the relevant art would typically hold an advanced degree in chemistry, material science, and/or a related discipline, and have at least two years of experience with designing and/or fabricating battery separators or have an equivalent level of education, training, and experience. Pet. 5. Patent Owner “adopts the definition proposed by Petitioner” for the purposes of the Preliminary Response. Prelim. Resp. 22. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s unopposed definition because it is consistent with the specification. We note that neither party indicated that the result would change under any different definition.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Absolute plastic deformation rate” and “relative plastic deformation rate” are the only claim terms disputed in this proceeding, and are clearly defined in the Specification and in claim 1. See Spec. 4:22–27, 4:47–54; 25:31–37. Because we determine that claim construction is not necessary to decide whether to institute, we do not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review). slip op. at 11
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“Petitioner’s arguments are unconvincing. Petitioner points to nothing in Nishikawa that allows a POSITA to determine L2 (defined as “a length of 4 Tensile strength is measured as force per units area, such as MPa or psi. One MPa equals one N/mm2. Nishikawa Table 1 discloses tensile strength in N/cm. Ex. 1004 Table 1. Petitioner makes calculations to convert the reported N/cm into N/m2 and then to GPa, but provides no explanation for why tensile strength is reported in N/cm or how it was measured. See Pet. 31. the porous substrate after the porous substrate is stretched to breakage and docked along the fracture caused by the breakage and flattened”) or L2 – L0. See generally Pet., Ex. 1004. Petitioner and its expert, Dr. Pecht, fail to adequately explain why tensile strength divided by Young’s modulus is “a proxy for L1 – L2” or why such a proxy is sufficient to disclose the limitation as stated. Instead, we are required to rely on “approximations” and “estimates” with insufficient explanation of why such they are appropriate or adequate. See Pet. 26, 30, 32; see also Ex. 1003 ¶¶ 97, 105–108, 111.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,964,927 - Jiangsu Favored Nanotechnology Co., Ltd. v. P2i Ltd.All claims unpatentablePTAB · Apr 11, 2025 · IPR2024-00380 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1–5, 7, and 9–14 are unpatentable as obvious over Cohen and Legein or Francesch and Legein; Petitioner’s motion to strike is denied as moot.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“The parties agree that a person of ordinary skill in the art in the field of the ’087 patent in June 20154 “would have had at least a bachelor’s degree in a field such as chemistry, physics, or chemical engineering, as well as at least two years of experience with plasma-polymerization techniques.” Pet. 20 (citing Ex. 1002 ¶¶ 22–29); PO Resp. 13 (Patent Owner stating that it “does not dispute this characterization of the level of ordinary skill in the art.”); see also PO Sur-reply 1–2 (noting both parties’ agreement on the education and experience level of the ordinarily skilled artisan).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“On the fully developed trial record, we determine that no claims need an express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Because of Patent Owner’s shifting definitions of the education and experience level of the ordinarily skilled artisan, it is unclear on the complete record what precise definition Patent Owner and Dr. Senkevitch are applying when arguing the skilled artisan’s capabilities. PO Resp. 13, 22–27, 31–32, 34–40; PO Sur-reply 1–6, 11–13; Ex. 2007 ¶¶ 30, 31, 33, 34, 37, 40, 52–55, 60, 68, 74, 76, 77, 80–86, 89, 91, 94, 95, 100, 102–105, 108, 110, 111, 113–116, 118–120, 122, 124, 127–134. We, therefore, give Dr. Senkevitch’s testimony regarding the capabilities of a person of ordinary skill in the art minimal weight, which leaves us with Patent Owner’s insufficiently supported arguments regarding the skilled artisan’s capabilities. PO Resp. 13, 22–27, 31–32, 34–40; PO Sur-reply 1–6, 11–13. Moreover, as Petitioner correctly points out, the ʼ087 patent expressly teaches that the precise conditions for forming a protective polymeric coating “will vary depending upon factors such as, without limitation, the nature of the monomer compound, the crosslinking agent, the substrate, as well as the desired properties of the coating” and that such “conditions can be determined using routine methods.” Ex. 1001 15:1–15:5 (emphasis added); Pet. Reply 17. Where the patent itself leaves to the judgment of an ordinarily skilled artisan the assessment of these factors to ascertain suitable conditions for forming the protective coating, we find persuasive Petitioner’s view that it would have been well within the level of ordinary skill to ascertain such suitable conditions.” slip op. at 20
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“We disagree with Patent Owner. Although the claims of the ʼ087 patent recite obtaining the protective cross-linked polymeric coating “by exposing the device or component to a plasma,” the field of endeavor analysis in an analogous art inquiry does not exclusively turn on the claims at issue, but rather takes account of the entirety of a patent’s disclosure. See In re Bigio, 381 F.3d 1320, 1326 (Fed. Cir. 2004) (explaining that “the PTO must show adequate support for its findings on the scope of the field of endeavor in the application’s written description and claims” (emphasis added)); In re Mettke, 570 F.3d 1356, 1359 (Fed. Cir. 2009) (rejecting an argument that the field of endeavor was limited to a claimed “Internet terminal” when “the specification describes various communication media, including facsimile machines and email, as related to the invention.”). This is significant here because the ʼ087 patent discloses that “[t]he … invention relates to protective coatings” and specifically “relates to protective coatings for electronic or electrical devices and components thereof, and methods of forming such coatings.” Ex. 1001, 1:14–17. Based on this disclosure, we find that the ʼ087 patent’s field of endeavor relates to “protective coatings for electronic or electrical devices and components thereof” broadly, not just those formed on such devices or components via a plasma polymerization process as asserted by Patent Owner. Id. Although Cohen does not explicitly disclose that its crosslinked polymers constitute a “protective coating,” Cohen does disclose that its “copolymerizable mixture can be cast into films” (Ex. 1004, 2:61–62), that the polymerization can “effected in situ,” and that the polymers may be used in “numerous” electrical applications (id. at 5:17–25). Tr. 8:9–10:2, 27:2– 21; see Pet. Reply 5 (explaining how “Cohen described insulating polymers that could be applied as films and be used to protect substrates including cables and electrical coils.” (citing Ex. 1004, 2:60–63, 5:13–25)). These disclosures suggest strongly that Cohen’s crosslinked polymers––if cast into a film or formed in situ on an electrical device or component––would serve as a protective coating on that electrical device or component, even though Cohen does not expressly refer to its crosslinked polymers ipsis verbis as a “protective coating.” Thus, we find that Cohen is within the field of endeavor of the ʼ087 patent.” slip op. at 15
Patent outcomesUS 11,041,087 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,041,087 - Kohler Co. v. Delta Faucet Co.InstitutedPTAB · Oct 4, 2024 · IPR2024-00700 · APJ Jane E Inglese · IPR · Institution
The Board instituted IPR on claims 1–24 and all asserted grounds, finding a reasonable likelihood that Kohler would prevail on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Petitioner provides sufficient information for purposes of institution to show that Tseng discloses or would have suggested a translucent light pipe defining a closed loop to diffuse light from light emitters outwardly away from a housing. Tseng’s Figures 30 and 37 show that rib 371 and protrusion 383 of translucent light conductors 37, 38 (light pipes), respectively, are both shaped as unbroken circles. Ex. 1004, Figs. 37, 38; see also id. ¶ 24 (describing “circular” rib), ¶ 26 (indicating that the “light conductor is formed in a sleeve shape”). Tseng discloses that light from LED elements 40 enters input face 311 of Tseng’s light conductors 37, 38, travels through transmission portion 312, and is emitted through downward facing output face 313. Ex. 1004 ¶¶ 91, 94, 97, 98, Figs. 30, 31, 35, 36, 37. Light is also emitted from outwardly extending annular rib 371 and protrusion 383 of light conductors 37, 38, respectively, which “enhance[s] light transmission.” Id. Petitioner, therefore, provides sufficient information to show that Tseng’s translucent light conductors 37, 38 (light pipes) define a closed loop to diffuse light from LED elements 40 (light emitters) outwardly away from external sleeve 34 (housing).” slip op. at 18
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art (“POSITA”) would have had a degree in industrial design or an equivalent field, and two years of professional experience working with kitchen, bath, or other plumbing fixtures (or similar products), or an equivalent level of skill, knowledge, and experience. Pet. 14. Petitioner asserts that a POSITA also would have been aware of, and generally knowledgeable about, the standard features and functionality of kitchen, bath, or other plumbing fixtures (or similar products). Id. Patent Owner neither adopts nor disputes Petitioner’s proposed level of ordinary skill in the art. Prelim. Resp. 10. For purposes of this Decision, we apply Petitioner’s definition of a POSITA, which is undisputed on this record, and is consistent with the level of ordinary skill in the art at the time of the invention as reflected in the asserted prior art.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“C. Claim Interpretation We interpret claims “using the same claim construction standard that would be used to construe the claims in a civil action held under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). Under that standard, claim terms generally are given their plain and ordinary meaning as would have been understood by the ordinarily skilled artisan at the time of the invention when read in the context of the specification and prosecution history. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). We construe terms in controversy only to the extent necessary to resolve the controversy. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner asserts that the claim terms do not require construction and should be afforded their plain and ordinary meaning. Pet. 13. Patent Owner contends that it “has applied the plain and ordinary meaning of the claim terms.” Prelim. Resp. 10. Taking into consideration the information presented, we determine that none of the claim terms requires express construction for purposes of deciding whether to institute review.7” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“its sprayhead by routing an electric wire connected to an external power supply through the shower head. Pet. 44 (citing Ex. 1004 ¶ 68, Figs. 1–5). Petitioner asserts that because Tseng’s shower head is designed to be pulled out, the wire is subject to stress and strain, which could lead to failure over time. Id. (citing Ex. 1003 ¶¶ 251–253). According to Petitioner, incorporating Mizuno’s hydroelectric generator into Tseng’s shower head would obviate the need for an external power supply or battery, which would reduce installation and operation costs, prevent a potential wiring failure, and eliminate periodic battery replacement. Id. at 45 (citing Ex. 1003 ¶¶ 257–260). Petitioner asserts that a person of ordinary skill in the art, therefore, would have been motivated to incorporate Mizuno’s hydroelectric generator into Tseng’s shower head, and would have had a reasonable expectation of success in doing so because Mizuno’s hydroelectric generator is designed and intended to be integrated into a faucet’s shower head to reliably power LEDs. Id. at 45–46 (citing Ex. 1008 ¶¶ 1, 2). Patent Owner counters that a person of ordinary skill in the art would not have had any reason to modify Tseng in view of Mizuno. Prelim. Resp. 32. Patent Owner contends that Tseng expressly set out to develop a design that includes electrical wiring, and did so successfully by improving the integration of electrical wiring into its shower head design. Id. at 33–34 (citing Ex. 1004 ¶¶ 9, 102–110). Patent Owner further contends that a person of ordinary skill in the art would not have been motivated to completely redesign Tseng’s shower head to change the power source entirely to eliminate wiring. Id. Patent Owner contends that a person of ordinary skill in the art also would not have had a reasonable expectation of success in incorporating Mizuno’s hydroelectric generator into Tseng’s shower head because Tseng explicitly discloses that the space in its shower head is narrow. Id. at 36 (citing Ex. 1004 ¶¶ 7, 108). According to Patent Owner, Mizuno’s hydroelectric generator requires room for additional components beyond the hydrogenator, including a voltage stabilizer, cooling components, and a relief valve, which Patent Owner contends would have discouraged the ordinarily skilled artisan from a major redesign of Tseng’s faucet necessary to incorporate these elements. Id. at 37. We have considered Petitioner and Patent Owner’s assertions for ground 2. Because Petitioner demonstrates a reasonable likelihood of prevailing in its challenge to the patentability of claim 1 for ground 1, resolution of the disputed factual issues raised by Petitioner and Patent Owner in ground 2 is best left for trial after full development of the record.” slip op. at 22
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 10,393,363 - PTAB · Sep 18, 2024 · IPR2024-00603 · APJ Sheldon M Mcgee · IPR · Institution
The Board instituted IPR on all challenged claims and all asserted grounds, finding a reasonable likelihood that Petitioner would prevail on claim 1 over Honermann and Cline.
RulingsInstitution decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Pet. 5–6 (citing Ex. 1003 ¶ 50). Petitioner further states “that more education could compensate for less experience and vice versa.” Id. at 6. Petitioner’s position is, therefore, consistent with Patent Owner’s proffered level of skill in the art which reflects less education and more experience in substantially the same fields. Specifically, Patent Owner asserts that such a skilled artisan “would have at least a bachelor’s degree in mechanical or automotive engineering and/or five or more years of experience in the automotive industry designing, developing, testing, and engineering automotive components or practical experience servicing, assembling, repairing, and/or developing internal combustion engines and/or engine oil filters.” Prelim. Resp. 4. On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). A more specific definition is not necessary for purposes of deciding whether to institute review. To the extent a more specific definition is required, however, we adopt Patent Owner’s definition because it is consistent with the disclosures of the asserted prior art references. We note, however, that we would reach the same conclusion under either parties’ definition.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner asserts that all non-“means” terms in the challenged claims should be afforded their plain and ordinary meaning, and that the “means” limitations recited in claims 1 and 15 should not be construed as means-plus- function terms pursuant to 35 U.S.C. § 112(6). Pet. 7. According to Petitioner, claims 1 and 15 include additional limitations that denote structure for those “means” limitations and furthermore do not recite a function corresponding to the recited means. Id. Patent Owner asserts that “the Board need not make a determination on claim construction in assessing whether to institute” trial. Prelim. Resp. 5. After review of the preliminary record, we determine that no claim terms require an express construction for purposes of institution. See Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”).” slip op. at 8
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“2. Advanced Bionics Prong One: whether “the same or substantially the same art or arguments previously were presented to the Office” As Petitioner acknowledges, a Japanese-language version of Yokoyama was cited in an IDS without an English translation. Pet. 19; Ex. 1002, 34 (indicating that an English translation was not provided by virtue of the absence of a checkmark in the “T” column on the far right of the PTO/SB/08a form).4 The Yokoyama reference relied on in the Petition (Ex. 1008) however, includes an English language translation of the text in 4 It is also not readily apparent that Patent Owner complied fully with the “Content Requirements for an Information Disclosure Statement” as set forth in MPEP § 609 in its IDS submission dated March 30, 2015. Specifically, § 609.04(a)(III) states that “[e]ach information disclosure statement must further include a concise explanation of the relevance . . . of the information listed that is not in the English language.” (italicized emphasis added, underlining in original); see also § 609.01 B.3 (stating this requirement). It does not appear that any concise explanation was filed with respect to either Japanese reference filed in the IDS. See Ex. 1002, 13–38 (IDS documents pertaining to Yokoyama reference); Semiconductor Energy Laboratory Co. v. Samsung Electronics Co., 204 F.3d 1368, 1376 (Fed. Cir. 2000) (“[A]lthough MPEP Section 609[] allows the applicant some discretion in the manner in which it phrases its concise explanation, it nowhere authorizes the applicant to intentionally omit altogether key teachings of the reference.”). addition to the Drawings that also appear in the untranslated Japanese-language version of Yokoyama submitted during prosecution. Compare Ex. 1007 (containing Japanese text with Figures 1–7c), with Ex. 1008 (containing English text along with Figures 1–7c). As such, the Yokoyama reference relied on in the Petition––being in English––contains roughly ten pages of more readily discernible information than the Japanese-language version of this reference submitted during prosecution. Significantly, Petitioner relies on textual disclosure in the English-translated version of Yokoyama in its challenges. Pet. 28–51, 54, 58, 59 (citing Ex. 1008 repeatedly). Such English-translated disclosure was not previously before the Examiner. Ex. 1002, 13–38. In view of this additional disclosure before us in English, i.e., disclosure that was not presented previously to the Office, we find that the English translated version of Yokoyama relied on here (Ex. 1008) is not “the same or substantially the same art” that was previously presented to the Office (Ex. 1007).” slip op. at 10
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“discretionary denial, we must also consider whether the Petition presents compelling merits. IPR2022-01242, Paper 23 at 4–5. As set forth above, we have considered the circumstances and facts before us in view of Fintiv factors 1–5, and determine that: Factor 1 is neutral, Factor 2 weighs heavily against discretionary denial, Factor 3 is neutral, Factor 4 weighs against discretionary denial, and Factor 5 weighs in favor of discretionary denial. Factors 1–5, considered as a whole, collectively weigh against exercising discretion to deny institution. As such, we need not undertake a “compelling merits” analysis as set forth under CommScope. The Merits Even though we do not consider here whether the merits are “compelling,” we do consider the merits of the Petition under Fintiv factor 6. As set forth below, we determine that Petitioner has satisfied the reasonable likelihood standard for purposes of institution. Such satisfaction weighs further against discretionary denial of the Petition.” slip op. at 19
Claim constructionDiscretionary denialcites PhillipsPatents in suitUS 9,023,203 - ARM Limited v. Icpillar LLCInstitutedPTAB · Aug 7, 2024 · IPR2024-00566 · APJ Donna M Praiss · IPR · Institution
The Board instituted IPR on claims 1, 5, 6, 8, 9, 15, and 16 on all asserted grounds, finding a reasonable likelihood that claim 1 is unpatentable over Banerjee.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“To institute inter partes review, we must determine that the information presented in the Petition shows “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons discussed below, after considering the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated a reasonable likelihood of prevailing with respect to at least one claim of the ’657 patent, and we determine inter partes review of all claims and all grounds asserted in the Petition.1” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“clarifications concerning the application of the Fintiv factors. See Interim Procedure For Discretionary Denials In AIA Post-Grant Proceedings With Parallel District Court Litigation, issued June 21, 2022 (“Guidance Memo”).9 The Guidance Memo clarifies “the PTAB’s current application of Fintiv to discretionary institution where there is parallel litigation.” Id. at 2. The Guidance Memo instructs us not to “discretionarily deny institution in view of parallel district court litigation where a petitioner presents a stipulation not to pursue in a parallel proceeding the same grounds or any grounds that could have reasonably been raised before the PTAB.” Id. at 3 (citing Sotera Wireless, Inc. v. Masimo Corp., IPR2020-01019, Paper 12 (PTAB Dec. 1, 2020) (precedential as to § II.A)). The Guidance Memo” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“For purposes of this Decision, we construe the term “outputting by the processor software programming commands to be executed by the hardware integrated circuit for controlling the electronic device” as referring to software programming commands that are capable of controlling an electronic device, that are output by a processor, and that are not merely a circuit design for fabrication. We emphasize that this construction is preliminary and based on the current record; to the extent the parties wish to argue for a different construction or to further clarify this construction, we encourage them to present arguments and supporting evidence at trial. For the purposes of this Decision, we need not expressly construe any” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“On the present record, we determine that Petitioner has shown sufficiently that Banerjee teaches outputting software intended to be installed on the designed integrated circuit that is capable of controlling the device into which the designed integrated circuit is installed. At paragraphs 72–83, Banerjee discloses the operation of its operating system optimization module. Ex. 1005 ¶¶ 38, 72–83. In particular, Banerjee teaches that the operating system optimization module can “compile a symmetric multiprocessing operating system” and that “the optimized operating system is compiled into a reduced footprint operating system that is instantiated in the device.” Id. ¶¶ 82–83. Because Banerjee teaches both compiling an operating system and instantiating that operating system in the designed device, the present record shows sufficiently that Banerjee teaches outputting software to run on the designed device. Patent Owner’s declarant, Joseph C. McAlexander III, P.E., disagrees with this interpretation, testifying that Banerjee’s paragraph 83 teaches only “compil[ing] the characteristics of the typical or ‘baseline’ ‘operating system configuration’ . . . in order to analyze its expected ‘footprint’ on the IC and how it is expected to be instantiated on the device.” Ex. 2001 ¶ 65. But the idea that Banerjee is concerned only with analyzing how the operating system is expected to be instantiated appears to contradict Banerjee’s teaching that the “reduced footprint operating system . . . is instantiated in the device,” which suggests actual, not merely expected, instantiation in the device. On the present record, beyond stating that “Banerjee only outputs a hardware description file,” Mr. McAlexander does not explain why Banerjee should be interpreted in this alternate fashion. Id. ¶ 66 (citing Ex. 1005 ¶¶ 44, 69, 84). There is no explanation of why the cited paragraphs of Banerjee should be interpreted to limit Banerjee’s disclosure (which, as discussed above, includes a teaching that the operating system is compiled and instantiated in the designed device) to merely outputting a hardware description file. Id. Accordingly, on the present record, Petitioner has shown sufficiently that Banerjee teaches or suggests limitation 1[d].” slip op. at 15
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,367,657 - ARM Limited v. Icpillar LLCInstitutedPTAB · Aug 7, 2024 · IPR2024-00476 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted review of claims 1, 5, 6, 8, and 14 on all asserted grounds, finding a reasonable likelihood that Banerjee renders at least claim 1 obvious.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art would be “familiar with automated circuit design” and “possess[] this knowledge through training and work experience, including have a Bachelor’s or Master’s Degree in computer science, electrical engineering, or a related field, with at least three years of practical experience.” Pet. 11–12. At this stage of the proceeding, Patent Owner does not challenge the Petitioner’s definition of a person of ordinary skill in the art. See Prelim. Resp., generally. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art as it is consistent with the ’899 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“According to Petitioner, the term should be broadly construed to encompass “internal outputs from compilers that are then used by other portions of the design” and “any form of software or mechanics of ‘providing’ software.” Prelim. Reply 1–3. Petitioner contends that the term must be construed broadly to encompass the embodiment shown in the ’899 patent’s Figure 4 illustrating output 71 of compiler 67, which is an internal input to ASIC Design 69 described as “a circuit design such as a layout or a schematic that can be sent out to a manufacturer for fabrication.” Id. at 1–2 (quoting Ex. 1001, 9:59–61) (emphasis omitted). Petitioner directs us to the disclosure that Figure 4’s output 71 (ASIC Programming) “may be software to be programmed and/or stored in a fabricated ASIC.” Id. at 2 (quoting Ex. 1001, 9:61–62) (emphasis omitted). Petitioner contends that the ’899 patent defines “software” broadly. Id. Specifically, Petitioner directs us to a portion of the ’899 patent’s specification that states “[h]erein, reference to software may encompass one or more applications, byte code, one or more computer programs, one or more executable, one or more instructions, logic, machine code, one or more scripts, or source code, and vice versa where appropriate.” Ex. 1001, 17:6–10. Patent Owner asserts that Petitioner’s proffered claim construction is incorrect because the language of the claim itself “does not suggest ‘internal’ software for use by the design tool, nor that the second recited ‘output[]’ could be part of the first.” Prelim. Sur-Reply 2. According to Patent Owner, viewed in context, the ’899 patent defines “software” broadly for “an exemplary computer system, not the invention’s outputs.” Id. Patent Owner asserts this definition describes the software types that a computer could execute, not a definition of “software programming commands” recited in claim 1[d]. Id. Regarding the ’899 patent’s Figure 4, Patent Owner asserts that Petitioner has not shown that Programming 71 must be an internal output for internal use because both Design 69 and Programming 71 are shown as outputs, not inputs, of the compiler. Id. at 4. Regarding the term “layout,” Patent Owner asserts this is merely a description of physical hardware for fabrication and that “[i]t is impossible for ‘software programming commands’ to be ‘stored in “layouts.”’ Id. at 3 (citing Ex. 2001 ¶¶ 32, 76, 90). For purposes of this Decision, we construe the term “outputting by the processor software programming commands to be executed by the hardware integrated circuit for controlling the electronic device” as referring to software programming commands that are capable of controlling an electronic device, that are output by a processor, and that are not merely a circuit design for fabrication. We emphasize that this construction is preliminary and based on the current record; to the extent the parties wish to argue for a different construction or to further clarify this construction, we encourage them to present arguments and supporting evidence at trial.” slip op. at 8
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“clarifications concerning the application of the Fintiv factors. See Interim Procedure For Discretionary Denials In AIA Post-Grant Proceedings With Parallel District Court Litigation, issued June 21, 2022 (“Guidance Memo”).5 The Guidance Memo clarifies “the PTAB’s current application of Fintiv to discretionary institution where there is parallel litigation.” Id. at 2. The Guidance Memo instructs us not to “discretionarily deny institution in view of parallel district court litigation where a petitioner presents a 5 Available at https://www.uspto.gov/sites/default/files/documents/interim_ proc_discretionary_denials_aia_parallel_district_court_litigation_memo_ 20220621_.pdf. stipulation not to pursue in a parallel proceeding the same grounds or any grounds that could have reasonably been raised before the PTAB.” Id. at 3 (citing Sotera Wireless, Inc. v. Masimo Corp., IPR2020-01019, Paper 12 (PTAB Dec. 1, 2020) (precedential as to § II.A)). When such a stipulation is offered after the Board’s decision on whether to institute review, it is too late to gain the benefit of the rule articulated in the Guidance Memo. NXP USA, Inc. v. Impinj, Inc., IPR2021-01556, Paper 13, 4 (PTAB Sept. 7, 2022) (precedential). Here, Petitioner “stipulates ‘not to pursue in a parallel proceeding the same grounds or any grounds that could have reasonably been raised before the PTAB.’” Prelim. Reply 10 (quoting Ex. 1020, 1). Petitioner offered this stipulation prior to a decision on whether to institute review, so it is timely under NXP. Accordingly, pursuant to the Guidance Memo, we do not exercise discretion under Fintiv to deny institution.” slip op. at 11
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“c) Conclusion Regarding Claim 1 Based on the current record, we determine that there is a reasonable likelihood that Petitioner will prevail in demonstrating that claim 1 is unpatentable as obvious in view of Banerjee. Accordingly, we institute inter partes review with respect to all grounds asserted in the Petition. 3. Claims 5, 6, 8, and 14 Because Petitioner demonstrates a reasonable likelihood of success in proving that at least one claim of the ’899 patent is unpatentable, we institute on all grounds and all claims raised in the Petition. See 37 C.F.R. § 42.108(a). Therefore, at this stage of the proceeding, it is not necessary for us to provide an assessment of every challenge raised by Petitioner, especially, as in this case, when Patent Owner does not separately argue those claims. Those challenges, in our view, are best left for trial after full development of the record.” slip op. at 17
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 8,924,899
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.