• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Savant Technologies LLC D/B/A GE Lighting / Ledvance LLC et al. v. Feit Electric Company, Inc.All claims unpatentable
  PTAB · Aug 31, 2026 · IPR2025-00260 · APJ Kevin W Cherry · IPR · Final written decision

  The Board held all challenged original claims unpatentable as obvious and denied the contingent motion to amend substitute claims 30–49.

  RulingsFinal written decision

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “would have been motivated to combine the teachings of the prior art references to achieve the claimed invention, and that the skilled artisan would have had a reasonable expectation of success in doing so.’” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1367–68 (Fed. Cir. 2016); see KSR, 550 U.S. at 418. Further, an assertion of obviousness “cannot be sustained by mere conclusory statements; instead, there must be some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” KSR, 550 U.S. at 418; In re NuVasive, Inc., 842 F.3d 1376, 1383 (Fed. Cir. 2016) (a finding of a motivation to combine “must be supported by a ‘reasoned explanation’”).” slip op. at 10

  • Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia no nexusObjective indicia outweighedDecided for petitioner

    “7. Summary As discussed above, we find that Patent Owner has failed to show a” slip op. at 35

  • PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, deniedDenied

    “Motion to Amend meets the statutory and regulatory requirements set forth in 35 U.S.C. § 316(d) and 37 C.F.R. § 42.121 for claims 30 and 32–49. We further find that Patent Owner has not met the statutory and regulatory requirements for proposed claim 31. Accordingly, we address below whether any of the proposed substitute claims have been shown to be unpatentable.” slip op. at 86

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateDenied

  Patent outcomesUS 8,604,678 unpatentable
  § 103 obviousness§ 112 disclosurecites Phillips · Graham
  Patents in suitUS 8,604,678
• Savant Technologies LLC D/B/A GE Lighting / Ledvance LLC et al. v. Feit Electric Company, Inc.All claims unpatentable
  PTAB · Aug 31, 2026 · IPR2025-00260 · APJ Kevin W Cherry · IPR · Final written decision

  The Board held all challenged claims 1–3, 6, 7, 9–14, 16–21, 25, 26, and 29 unpatentable as obvious and granted the motion to amend for substitute claims 30–49.

  RulingsFinal written decision

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “E. Credibility of Dr. Doolittle Patent Owner argues that we should give no weight to Dr. Doolittle’s testimony because, “[o]n cross examination, Prof. Doolittle repeatedly contradicted himself, dodged questions, and tried to shoehorn new and nonresponsive opinions into his answers to Patent Owner’s questions.” PO Resp. 25. Patent Owner raises two major complaints about Dr. Doolittle. First, Patent Owner argues that he took inconsistent positions by asserting in these IPR proceedings that the claims were entitled to their plain and ordinary meaning, while in the parallel district court proceeding, asserting that certain claim terms were indefinite. Id. at 26–28. Second, Patent Owner argues that Dr. Doolittle “repeatedly dodged questions and tried to shoehorn new and nonresponsive opinions into his answers to Patent Owner’s questions,” and that “[d]uring cross examination Patent Owner was forced to object to Prof. Doolittle’s nonresponsive answers no less than eighteen times.” Id. at 28. We strongly disagree with Patent Owner’s characterization of Dr. Doolittle’s testimony. We have reviewed the entirety of both of Dr. Doolittle’s depositions. We are impressed with his forthrightness, candor, and good humor in the face of Patent Owner’s counsel’s aggressive questioning. Contrary to Patent Owner’s assertions, we find that his testimony was well-reasoned, forthright, honest, and entitled to significant weight. Dr. Doolittle explained the different claim construction positions We also strongly disagree that Dr. Doolittle’s answers were nonresponsive or “evasive” as Patent Owner argues. Patent Owner’s numerous attempts to “strike” portions of his testimony belie Dr. Doolittle’s efforts to honestly and in good faith respond to Patent Owner’s counsel’s questions. Ex. 2025, 22:10–23:15, 25:9–26:14, 30:14–22, 40:3-9, 58:12–59:1, 60:18–61:13, 65:1–10, 83:15–84:16, 92:15–95:20, 96:18–99:9, 102:22–106:16, 135:3–136:22. An answer is not “non-responsive” simply because it does not conform to the conclusion you want or undermines the logic underlying your questioning. Dr. Doolittle explained his answers and addressed the issues Patent Owner asked about. Accordingly, we decline Patent Owner’s invitation to give Dr. Doolittle’s testimony no weight. Instead, we assess Dr. Doolittle’s testimony on a case-by-case basis as discussed below.” slip op. at 21

  • Skill levelOther

    “B. Level of Ordinary Skill in the Art We consider the asserted ground of unpatentability in view of the understanding of a person of ordinary skill in the art (“POSITA” or “POSA”). In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quoting Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d Relying on the declaration testimony of its expert, Dr. Doolittle, Petitioner contends that an ordinarily skilled artisan for the ’678 patent “would have had an undergraduate degree (i.e., B.S., B.S.E. or the equivalent) in electrical engineering, materials science, physics, or a similar discipline” and “would also have one to two years of experience in the field of LED packaging design.” Pet. 5–6. Petitioner additionally contends that “[m]ore education could substitute for experience, and vice versa.” Id. Petitioner further contends that “[t]his person would have been capable of understanding and applying the teachings of the ’678 patent and the prior-art references discussed herein,” and “[m]oreover, the prior art reflects the level of skill at the time of the claimed invention.” Id. (citing Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); Ex. 1102 ¶¶ 38–42). Patent Owner states that “solely for the purposes of this proceeding, Patent Owner and its technical expert employ the same level of skill in the art as Petitioners.” PO Resp. 24–25. Thus, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’678 patent and the asserted prior art, and we apply it in our obviousness analysis below.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “lower wavelength might offer, there were other drawbacks that a person of ordinary skill would have to balance. But “a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.” Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006). Indeed, Petitioner has shown several references—including, Basin-2005, Shimizu, and Stokes—that made this tradeoff. Moreover, “[o]bviousness does not require absolute predictability of success. . . . [A]ll that is required is a reasonable expectation of success.” In re O’Farrell, 853 F.2d 894, 903–04 (Fed. Cir. 1988). We find that the prior art of record demonstrates that a person of ordinary skill in the art at the time of the invention would have such an expectation in making the combination of Basin-2007 and Basin-2005. Accordingly, we find that Petitioner has shown by a preponderance of the evidence that there would have been motivation to combine Basin-2007 and Basin-2005 with a reasonable expectation of success. 4. Summary We have reviewed Petitioner’s contentions regarding claims 1–3, 6, 9, 10, 16–21, and 25 (Pet. 19–53), and find that Petitioner has shown by a preponderance of the evidence that Basin-2007 and Basin-2005 teach the limitations of those claims, and that there would have been a motivation to combine the references in the manner suggested with a reasonable considerations does not outweigh the strong showing of obviousness. Accordingly, we find that Petitioner has shown by a preponderance of the evidence that claims 1–3, 6, 9, 10, 16–21, and 25 would have been obvious over Basin-2007 and Basin-2005.” slip op. at 41

  • Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia no nexusDecided for petitioner

    “1. Nexus In order for secondary considerations to be awarded “substantial” slip op. at 22

  Patent outcomesUS 8,604,678 unpatentable
  § 103 obviousness§ 112 disclosurecites Phillips · Graham
  Patents in suitUS 8,604,678
• Savant Technologies LLC D/B/A GE Lighting And Ledvance LLC / Savant Technologies LLC D/B/A GE Lighting, Elong International USA Inc., And Xiamen Longstar Lighting Co. Ltd v. Feit Electric Company, Inc.All claims unpatentable
  PTAB · Aug 31, 2026 · IPR2024-01357 · APJ Kevin W Cherry · IPR · Final written decision

  The Board held all challenged original claims unpatentable as obvious and granted the contingent motion to amend for substitute claims 30 and 32–49; substitute claim 31 was denied.

  RulingsFinal written decision

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “E. Credibility of Dr. Doolittle Patent Owner argues that we should give no weight to Dr. Doolittle’s testimony because, “[o]n cross examination, Prof. Doolittle repeatedly contradicted himself, dodged questions, and tried to shoehorn new and nonresponsive opinions into his answers to Patent Owner’s questions.” PO Resp. 25. Patent Owner raises two major complaints about Dr. Doolittle. First, Patent Owner argues that he took inconsistent positions by asserting in these IPR proceedings that the claims were entitled to their plain and ordinary meaning, while in the parallel district court proceeding, asserting that certain claim terms were indefinite. Id. at 26–28. Second, Patent Owner argues that Dr. Doolittle “repeatedly dodged questions and tried to shoehorn new and nonresponsive opinions into his answers to Patent Owner’s questions,” and that “[d]uring cross examination Patent Owner was forced to object to Prof. Doolittle’s nonresponsive answers no less than eighteen times.” Id. at 28. We strongly disagree with Patent Owner’s characterization of Dr. Doolittle’s testimony. We have reviewed the entirety of both of Dr. Doolittle’s depositions. We are impressed with his forthrightness, candor, and good humor in the face of Patent Owner’s counsel’s aggressive questioning. Contrary to Patent Owner’s assertions, we find that his testimony was well-reasoned, forthright, honest, and entitled to significant weight. Dr. Doolittle explained the different claim construction positions We also strongly disagree that Dr. Doolittle’s answers were nonresponsive or “evasive” as Patent Owner argues. Patent Owner’s numerous attempts to “strike” portions of his testimony belie Dr. Doolittle’s efforts to honestly and in good faith respond to Patent Owner’s counsel’s questions. Ex. 2025, 22:10–23:15, 25:9–26:14, 30:14–22, 40:3-9, 58:12–59:1, 60:18–61:13, 65:1–10, 83:15–84:16, 92:15–95:20, 96:18–99:9, 102:22–106:16, 135:3–136:22. An answer is not “non-responsive” simply because it does not conform to the conclusion you want or undermines the logic underlying your questioning. Dr. Doolittle explained his answers and addressed the issues Patent Owner asked about. Accordingly, we decline Patent Owner’s invitation to give Dr. Doolittle’s testimony no weight. Instead, we assess Dr. Doolittle’s testimony on a case-by-case basis as discussed below.” slip op. at 21

  • Skill levelOther

    “B. Level of Ordinary Skill in the Art We consider the asserted ground of unpatentability in view of the” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “lower wavelength might offer, there were other drawbacks that a person of ordinary skill would have to balance. But “a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.” Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006). Indeed, Petitioner has shown several references—including, Basin-2005, Shimizu, and Stokes—that made this tradeoff. Moreover, “[o]bviousness does not require absolute predictability of success. . . . [A]ll that is required is a reasonable expectation of success.” In re O’Farrell, 853 F.2d 894, 903–04 (Fed. Cir. 1988). We find that the prior art of record demonstrates that a person of ordinary skill in the art at the time of the invention would have such an expectation in making the combination of Basin-2007 and Basin-2005. Accordingly, we find that Petitioner has shown by a preponderance of the evidence that there would have been motivation to combine Basin-2007 and Basin-2005 with a reasonable expectation of success. 4. Summary We have reviewed Petitioner’s contentions regarding claims 1–3, 6, 9, 10, 16–21, and 25 (Pet. 19–53), and find that Petitioner has shown by a preponderance of the evidence that Basin-2007 and Basin-2005 teach the limitations of those claims, and that there would have been a motivation to combine the references in the manner suggested with a reasonable considerations does not outweigh the strong showing of obviousness. Accordingly, we find that Petitioner has shown by a preponderance of the evidence that claims 1–3, 6, 9, 10, 16–21, and 25 would have been obvious over Basin-2007 and Basin-2005.” slip op. at 41

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “1. Nexus In order for secondary considerations to be awarded “substantial” slip op. at 22

  Patent outcomesUS 8,604,678 unpatentable
  § 103 obviousness§ 112 disclosurecites Phillips · Graham
  Patents in suitUS 8,604,678
• Savant Technologies LLC D/B/A GE Lighting / Ledvance LLC et al. v. Feit Electric Company, Inc.All claims unpatentable
  PTAB · Aug 28, 2026 · IPR2024-01357 · APJ Kevin W Cherry · IPR · Final written decision

  Claims 1–3, 6, 7, 9, 10, 16–21, 25, 26, and 29 are unpatentable; substitute claims 30–49 were not reached.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art We consider the asserted ground of unpatentability in view of the” slip op. at 10

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “E. Credibility of Dr. Doolittle Patent Owner argues that we should give no weight to Dr. Doolittle’s testimony because, “[o]n cross examination, Prof. Doolittle repeatedly contradicted himself, dodged questions, and tried to shoehorn new and nonresponsive opinions into his answers to Patent Owner’s questions.” PO Resp. 25. Patent Owner raises two major complaints about Dr. Doolittle. First, Patent Owner argues that he took inconsistent positions by asserting in these IPR proceedings that the claims were entitled to their plain and ordinary meaning, while in the parallel district court proceeding, asserting that certain claim terms were indefinite. Id. at 26–28. Second, Patent Owner argues that Dr. Doolittle “repeatedly dodged questions and tried to shoehorn new and nonresponsive opinions into his answers to Patent Owner’s questions,” and that “[d]uring cross examination Patent Owner was forced to object to Prof. Doolittle’s nonresponsive answers no less than eighteen times.” Id. at 28. We strongly disagree with Patent Owner’s characterization of Dr. Doolittle’s testimony. We have reviewed the entirety of both of Dr. Doolittle’s depositions. We are impressed with his forthrightness, candor, and good humor in the face of Patent Owner’s counsel’s aggressive questioning. Contrary to Patent Owner’s assertions, we find that his testimony was well-reasoned, forthright, honest, and entitled to significant weight. Dr. Doolittle explained the different claim construction positions We also strongly disagree that Dr. Doolittle’s answers were nonresponsive or “evasive” as Patent Owner argues. Patent Owner’s numerous attempts to “strike” portions of his testimony belie Dr. Doolittle’s efforts to honestly and in good faith respond to Patent Owner’s counsel’s questions. Ex. 2025, 22:10–23:15, 25:9–26:14, 30:14–22, 40:3-9, 58:12–59:1, 60:18–61:13, 65:1–10, 83:15–84:16, 92:15–95:20, 96:18–99:9, 102:22–106:16, 135:3–136:22. An answer is not “non-responsive” simply because it does not conform to the conclusion you want or undermines the logic underlying your questioning. Dr. Doolittle explained his answers and addressed the issues Patent Owner asked about. Accordingly, we decline Patent Owner’s invitation to give Dr. Doolittle’s testimony no weight. Instead, we assess Dr. Doolittle’s testimony on a case-by-case basis as discussed below.” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “lower wavelength might offer, there were other drawbacks that a person of ordinary skill would have to balance. But “a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.” Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006). Indeed, Petitioner has shown several references—including, Basin-2005, Shimizu, and Stokes—that made this tradeoff. Moreover, “[o]bviousness does not require absolute predictability of success. . . . [A]ll that is required is a reasonable expectation of success.” In re O’Farrell, 853 F.2d 894, 903–04 (Fed. Cir. 1988). We find that the prior art of record demonstrates that a person of ordinary skill in the art at the time of the invention would have such an expectation in making the combination of Basin-2007 and Basin-2005. Accordingly, we find that Petitioner has shown by a preponderance of the evidence that there would have been motivation to combine Basin-2007 and Basin-2005 with a reasonable expectation of success.” slip op. at 41

  • Obviousness (§103) › Objective indicia / secondary considerationsDecided for petitioner

    “7. Summary As discussed above, we find that Patent Owner has failed to show a” slip op. at 35

  Patent outcomesUS 8,604,678 unpatentable
  § 103 obviousness§ 112 disclosurecites Phillips · Graham
  Patents in suitUS 8,604,678
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 1–17 were not shown unpatentable because Petitioner failed to establish that Usui’s interconnect structure or Yu’s metal gate stacks satisfy the construed “electrode stack” limitation.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA” or “POSA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–82). Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 6–7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’562 patent and the asserted prior art, we maintain Petitioner’s definition for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “comprises the recited metals and has the recited thickness, which forms an electrical contact for use on a semiconductor device generally or a group III- V semiconductor in particular. This is consistent with our determination that “electrode stack” is a conductor that provides a path for current entering or leaving a medium such as a semiconductor device We disagree with Patent Owner that “electrode stack” as used in the challenged claims should be limited to the specific electrodes shown in the embodiments described in the Specification. See PO Resp. 4–9. Although the Specification describes embodiments using source, drain, and Schottky gate electrodes as electrical contacts, we see no reason to construe the term “electrode stack” itself to be limited to these components as Patent Owner proposes. Claims 1 and 13 expressly recite that electrode stacks comprise the claimed “electrical contact,” without expressly including or precluding any specific type of electrode. Ex. 1001, 5:54–63, 6:37–47. The Federal Circuit advises that the Specification “is not a substitute for, nor can it be used to rewrite, the chosen claim language. ‘Specifications teach. Claims claim.’” SuperGuide, 358 F.3d at 875 (quoting SRI Int’l v. Matsushita Elec. Corp. of Am., 775 F.2d 1107, 1121 n.14 (Fed. Cir. 1985) (en banc)). The Specification does teach electrical contacts that include source, drain, and Schottky gate electrodes, but claims 1 and 13 are directed to electrical contacts that are not expressly so limited. Patent Owner’s proposed construction would effectively rewrite the claim by adding limitations, which we decline to do under the guise of claim construction. See id. (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not a part of the claim.”). In view of the foregoing, we construe the claim term “electrode stack” to mean “a conductor that provides a path for current entering or leaving a medium such as a semiconductor device.”” slip op. at 17

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In contrast, Patent Owner’s declarant Dr. Piner testifies, with evidentiary support, that interconnects (such as Usui’s interconnect metallurgy structure) and electrical contacts (such as that claimed in the ’562 patent) are not the same thing. See Ex. 2024 ¶¶ 63–70. For example, Dr. Piner explains: In other words, not all metals in a semiconductor device have the same purpose and could not be said to be interchangeable. By August 2009 it was well known to a POSA how to discern if a metal component in a transistor is an interconnect or serves as an electrical contact such as a gate contact or ohmic contact, based on the structure and functionality of the metal component. For example, interconnects are made up of metal strips and are deposited on insulators. EX-1011 (Mishra) at 216. Interconnects are low resistance conductors that can carry very high current densities. Id., 216, 217. Unlike Schottky contacts and ohmic contacts, interconnects do not provide non-linear IV response like Schottky contacts nor inject electrons and holes into semiconductors like ohmic contacts. Id., 218. As many of the references cited by Dr. Zhao illustrate, electrical contacts had their own highly complex design challenges. EX-1008 (Pearton), 41-59 (Pages 53-71 of 383) (discussing electrical contacts); EX-1017 (Kramer), 11-126 (Pages 18-130 of 151) (same). And while Dr. Zhao cites these as supporting a POSA’s knowledge of an electrical contact, none of these references describe electrical contacts as interconnects. Id. ¶ 71. Dr. Piner further testifies that Usui’s interconnect metallurgy structure is an interconnect, and not an electrical contact, because “Usui states that ‘[t]he structures fabricated by the process of the present invention are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.’” Id. ¶ 148 (citing Ex. 1004, 1:11–14) (alteration in original); see also id. ¶¶ 150– 151 (Dr. Piner testifying that Usui’s interconnect metallization structure is not an “electrode stack” under a broad definition of electrode). Dr. Piner’s testimony in this regard rebuts Petitioner’s and Dr. Zhao’s conclusory assertions to the contrary.” slip op. at 21

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “conductor that provides a path for current entering or leaving a medium such as a semiconductor device.” Thus, Petitioner must show that Usui’s layers 13–15, 18, and 19 provide a path for current entering or leaving a medium such as a semiconductor device. After reviewing the complete trial record, we are not persuaded that Petitioner has done so. Petitioner relies on the testimony of Dr. Zhao to support its contention that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential).” slip op. at 21

  Patent outcomesUS 8,686,562 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,686,562
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 12, 2026 · IPR2025-00094 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1–16 were not shown unpatentable under any asserted obviousness ground because Petitioner failed to establish the proposed modifications and combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 5 (citing Ex. 1003 ¶¶ 67–69). Petitioner also argues that “[a]dditional education could substitute for professional experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. Accordingly, and because it appears to be consistent with the ’003 patent and the asserted prior art, we adopt Petitioner’s assessment of the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither party proposes construing any claim terms. Pet. 6; Prelim. Resp. 1–76. In addition, as discussed below, we are able to determine the outcome of this proceeding without expressly construing any terms. Thus, we do not construe any terms for the purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “challenged claim. Unigene Labs., Inc. v. Apotex, Inc., 655 F.3d 1352, 1360 (Fed. Cir. 2011). “This is so because inventions in most, if not all, instances rely upon building blocks long since uncovered, and claimed discoveries almost of necessity will be combinations of what, in some sense, is already known.” KSR, 550 U.S. at 418–419. On the other hand, an obviousness analysis “need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.” Id. at 418; accord In re Translogic Tech., Inc., 504 F.3d 1249, 1259 (Fed. Cir. 2007). However, a petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016). Instead, a petitioner must articulate a reason why a person of ordinary skill in the art would have combined or modified the prior art references. In re NuVasive, Inc., 842 F.3d 1376, 1382 (Fed. Cir. 2016); see also Metalcraft of Mayville, Inc. v. The Toro Co., 848 F.3d 1358, 1366 (Fed. Cir. 2017) (“In determining whether there would have been a motivation to combine prior art references to arrive at the claimed invention, it is insufficient to simply conclude the combination would have been obvious without identifying any reason why a person of skill in the art would have made the combination.”); Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.”) (citing InTouch Techs., Inc. v. VGO Commc’ns, Inc., 751 F.3d 1327, 1352 (Fed. Cir. 2014)). In arguing for the obviousness of claim 1 over the combination of Bonn and Mizuta, Petitioner argues that a person of ordinary skill in the art would have modified Bonn to perform high-frequency signal amplification. Pet. 19–25. In particular, Petitioner argues that a person of ordinary skill in the art “would have found it obvious to modify the circuit of Figure 1 [of Bonn] and use Figure 7’s structure for high frequency signal amplification in place of mixer 40,” followed by additional modifications to the circuit of Figure 1. Id. at 22–25. These additional modifications include removing LO port 55, removing FET 20 (along with voltage source 80, capacitors 16, 26, and 34, resistor 18, and inductors 22 and 24), removing capacitor 34 and shorting gate structure 324 to ground, and removing resistors 46 and 48 and shorting terminal 51 to ground. Id. According to Petitioner, the motivation for these modifications was that “Bonn . . . teaches using its dual gate structures for signal amplification without signal mixing.” Id. at 22 (citing Ex. 1006, 11:26–37). On the record developed at trial, we disagree. Bonn does, as Petitioner argues, teach that “the dual gate FET structure of the present invention can be tailored to provide superior performance over the prior art dual gate FET structures in high frequency signal mixing as well as other applications such as high frequency signal amplification.” Ex. 1006, 11:33–37. But the tailoring that Bonn refers to relates to changes to the structure of the field-effect transistor itself, not to the circuitry surrounding that transistor. Id. (teaching that the reason that “the dual gate FET structure of the present invention can be tailored” is that “the parameters such as gate width, dopant concentration, and channel depth, under each gate of the dual gate FET are individually adjusted for optimum performance”). Thus, although Bonn might have motivated a person of ordinary skill in the art to have made changes to the dual-gate FET itself, we are not persuaded that it would have motivated the additional changes to the circuit of Bonn’s Figure 1.” slip op. at 11

  • Strike new argumentNew argument disregardedDecided for patent owner

    “Mishra’s Figure 5 is a second gate in favor of a new position. Petitioner’s new argument is that a person of ordinary skill in the art would have found it obvious to connect the field plate of Mishra’s Figure 5 to the source instead of the gate, converting the field plate into a second gate. Compare Pet. 83 (equating “drain side gate” with “field plate 66, Figure 5”), 86–88 (identifying field plate 66 as a “second gate”), with Reply 21–22 (identifying only the embodiment of Mishra’s Figure 10 as a source-connected field plate), 22–23 (arguing that Mishra teaches that the Figure 5 embodiment “could be arranged as ‘a single transistor with a dual gate structure’”). Although “the introduction of new evidence in the course of the trial is to be expected in inter partes review trial proceedings,” Genzyme Therapeutic Prods. LP v. Biomarin Pharm. Inc., 825 F.3d 1360, 1366 (Fed. Cir. 2016), the shifting of arguments is not, Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). Accordingly, Petitioner’s change of arguments here is inappropriate. Moreover, even if we were to consider Petitioner’s inappropriate new argument, we would conclude that Petitioner does not support the argument with sufficient evidence. “Whether [an obviousness ground] is based on combining disclosures from multiple references, combining multiple embodiments from a single reference, or selecting from large lists of elements in a single reference, there must be a motivation to make the combination and a reasonable expectation that such a combination would be successful, otherwise a skilled artisan would not arrive at the claimed combination.” In re Stepan, 868 F.3d 1342, 1346 n.1 (Fed. Cir. 2017). Petitioner’s new argument relies on a person of ordinary skill in the art modifying the Figure 5 embodiment of Mishra to connect the field plate to the source rather than the gate. Reply 21–24. Petitioner does not, however, show that a person of ordinary skill in the art would have had a motivation to make this modification or a reasonable expectation that this combination would be successful. Id. Petitioner argues instead that “[n]o ‘reason’ is needed.” Id. at 24. Thus, Petitioner does not show by a preponderance of the evidence that claim 1 would have been obvious over the combination of Mishra and Ren.” slip op. at 19

  Patent outcomesUS 8,264,003 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,264,003
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

  The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

  • BurdenNot shown unpatentable

    “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artOther

    “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

  Patent outcomesUS 9,421,713 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,421,713
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00311 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1, 3–11, and 17–22 are unpatentable as obvious over grounds using Mazumder and Mori; grounds relying on Henke fail because Henke is not analogous art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printers including remote control of rapid fabrication systems.” Pet. 6 (citing Ex. 1003 ¶¶ 40–42). Petitioner also argues that “[a]dditional years of experience could substitute for an advanced-level degree (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” PO Resp. 11–12. Neither party explains why the outcome of this case would be affected by the adoption of either of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “There is also evidence that supports Petitioner’s proposed construction, under which a user interface may display both the image and the projection if it displays them at different times. This evidence includes statements in the specification that describe displaying an image “instead” of “a rendering of a three-dimensional model” and that describe displaying a “video image and/or model projection” rather than merely a video image and a model projection. Ex. 1001, 22:43–53, 24:52–55, Figs. 5, 7. It also includes arguments in the prosecution history distinguishing Taminger on the basis of failure of disclose any display of both an image and a projection at all, rather than on the basis of failure to disclose simultaneous display of both visualizations. Ex. 1002, 160, 161. Based on our review of all the probative evidence, we find that the preponderance of the evidence supports Petitioner’s view, so we construe the challenged claims as not requiring simultaneous display of the image and the projection.” slip op. at 15

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “With the problem solved by the ’324 patent defined as monitoring automated three-dimensional fabrication processes, we find that Mori is at least reasonably pertinent to the problem. Mori discloses “[a] machining status monitoring apparatus.” Ex. 1005, code (57), ¶ 43. That apparatus uses “actual CCD cameras . . . to image the workpiece.” Id. ¶ 49. It also has a “virtual image generating section” with “virtual CCD cameras” having “view points” that “match the view points of the actual CCD cameras.” Id. ¶¶ 59, 61, 62. This disclosure relates quite closely to monitoring an automated three-dimensional fabrication process and thus is at least reasonably pertinent to solving that problem. d) Conclusion For the reasons discussed above, Mori is both in the same field as the ’324 patent and at least reasonably pertinent to the problem solved by the ’324 patent. Accordingly, it is analogous art to the ’324 patent.” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Regarding combining the teachings of Mazumder with those of Mori, the evidence of record shows that the print head of Mazumder’s three-dimensional printer could obscure portions of the actual camera’s view of the object being printed and that displaying Mori’s virtual image of the object in addition to Mazumder’s actual image of the object “would have allowed the user to of the remote computer to monitor the progress of the object even when the actual view of the object is partially or totally obscured.” Ex. 1003 ¶ 86. c) Conclusion Regarding Claim 1 For the reasons discussed above, the preponderance of the evidence shows that claim 1 would have been obvious over the combination of Mazumder and Mori.” slip op. at 26

  Patent outcomesUS 8,562,324 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,562,324
• Valve Corporation v. Immersion CorporationAll claims unpatentable
  PTAB · Mar 23, 2026 · IPR2024-00582 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–6, 14–16, and 19 are unpatentable based on anticipation by or obviousness over Pratt, and obviousness over Pratt–Ku, Ku, or Ku–Jiang.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that formal education could substitute for practical experience, and vice versa. Pet. 6, PO Resp. 18. The parties’ proposed levels of ordinary skill appear to be substantially similar, supported by testimonial evidence, and consistent with the asserted prior art and the types of problems and solutions identified in the ’738 patent. See, e.g., Ex. 1001, 1:6–61. Although we discern no difference in the outcome of this decision from choosing one over the other, we adopt Petitioner’s proposed level of skill for this decision. The outcome of our decision would be the same under Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “We find insufficient support in the specification or prosecution history to narrow the term “haptic effect” to only one that has not been modified or combined with another haptic effect. The ’738 patent still refers to combined or modified haptic effects as a “haptic effect.” Ex. 1001, 11:35–38 (“a haptic effect may further be modified or combined with another haptic effect” and “the haptic effect can include one or more haptic effects”). We also find no support for importing into the construction of “haptic effect” the ’738 patent’s example in which a haptic effect can be “based on the proximity signal and the touch sensor signal.” That is already an explicit claim limitation. Id. at 14:19–20 (“generate a haptic output signal based at least in part on the first [proximity] and second [touch] sensor signals”). Including that limitation as part of the construction of “haptic effect” would render the limitation superfluous. See Apple, Inc. v. Ameranth, Inc., 842 F.3d 1229, 1237 (Fed. Cir. 2016) (“The Board was correct to not include in its construction of ‘menu’ features of menus that are expressly recited in the claims . . . . Construing a claim term to include features of that term already recited in the claims would make those expressly recited features redundant.”). We also disagree with Patent Owner that the ’738 patent’s references to haptic effects modified or combined with other haptic effects are unclaimed embodiments. The ’738 patent discloses that a proximity-based haptic effect may be combined with a touch-based haptic effect, such as when “a particular haptic effect associated with a particular control on a user interface element [is] further . . . modified or combined with another haptic effect based on the proximity sensor signal,” or when “the haptic effect [to be output by the processor] . . . include[s] a haptic effect meant to confirm ‘pushing’ on a virtual button.” Ex. 1001, 11:32–40. These examples are consistent with the claim language and we find no credible evidence in the record that these embodiments are intended to be excluded from the claimed invention. Thus, we agree with Petitioner that it would be incorrect to construe the term “haptic effect” to include the extraneous limitations Patent Owner proposes. We also agree with Petitioner that a person of ordinary skill in the art reading the ’738 patent disclosure would have understood that a combined or modified haptic effect is still a haptic effect.” slip op. at 11

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “To show anticipation under § 102, a petitioner must locate every element in a claim, arranged as recited in the claim, in a single prior art reference. See Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1369 (Fed. Cir. 2008). The limitations may be present in the reference “either explicitly or inherently.” In re Schreiber, 128 F.3d 1473, 1477 (Fed. Cir. 1997). In making this determination, we consider the reference “together with the knowledge of one of ordinary skill in the pertinent art.” In re Paulsen, 30 F.3d 1475, 1480 (Fed. Cir. 1994) (citing In re Samour, 571 F.2d 559, 562 (CCPA 1978)).” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “We find Petitioner’s arguments persuasive and disagree with Patent Owner’s arguments to the contrary. Ku discloses summing two overlapping vibration signals, one “based at least in part on” data from a proximity sensor and another “based at least in part on” data from a touch sensor. Ex. 1008, Fig. 12 (items 705, 710, and 715). The summed signal 715 is the basis for generating what the user would perceive as a single haptic effect. See Ex. 1004 ¶ 210–212. This meets limitation 1F. We agree with Petitioner’s argument as to why there would have been a motivation to modify Pratt to include Ku’s teachings. Petitioner’s argument is not merely that Pratt was ready for improvement; Petitioner persuasively argues that a person of ordinary skill in the art would have had reason to add Ku’s method for confirming that the user has touched the intended icon to Pratt’s system. Both Pratt and Ku already disclose using both proximity and touch data in generating a haptic effect, and based on the evidence of record, we are of the view that combining the two teachings would not have been uniquely challenging or otherwise beyond the level of ordinary skill in the art. See Leapfrog Enters., Inc. v. Fisher-Price, Inc., 485 F.3d 1157, 1162 (Fed. Cir. 2007) (“Leapfrog presents no evidence that the inclusion of a reader in [electronic children's toys] was uniquely challenging or difficult to one of ordinary skill in the art.” (citing KSR, 550 U.S. at 419–420))” slip op. at 32

  Patent outcomesUS 11,175,738 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,175,738

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.