- Boe Technology Group Co., Ltd. v. 138 East LCD Advancements LimitedInstitution deniedPTAB · Dec 16, 2024 · IPR2024-00977 · APJ Christopher M Kaiser · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of proving claims 7–13 and 15–20 unpatentable on any asserted ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“determine whether to institute an inter partes review under 35 U.S.C. § 314 and 37 C.F.R. § 42.4(a). Inter partes review may not be instituted unless “the information presented in the petition filed under [35 U.S.C.] section 311 and any response filed under [35 U.S.C.] section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). “When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2023).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had at least a Bachelor’s degree in electrical engineering, computer science, physics, or a similar field and at least two years of experience designing semiconductor display devices, including LCD displays.” Pet. 19. Petitioner also asserts that “[a]dditional relevant work experience can compensate for less education, and vice versa.” Id. On the record presented, Patent Owner “does not dispute the level of skill for a person of ordinary skill in the art . . . set forth in the Petition.” Prelim. Resp. 8. Neither party explains why the outcome of this case would be affected by the adoption of any particular proffered definition of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’606 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“As discussed below, we are able to determine whether to institute review without resolving the construction of any claim terms. Accordingly, we need not and do not construe any terms expressly. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“view. First, as Petitioner admits, data line 6a is not connected to image signal line 101d and line 109 other than when sample hold circuit 101c connects them due to shift register 101b outputting an enabling signal. Pet. 49. This is supported by the layout of the four elements in Fujikawa’s Figure 2. Ex. 1005, Fig. 2 (depicting sample hold circuits 101c between and connecting data lines 6a and signal lines 101d). In addition, Patent Owner’s declarant, Dr. E. Fred Schubert, testifies that “two separate lines straddling circuitry are [not] one line.” Ex. 2001 ¶ 64. The dispute between the parties on this issue is largely one of claim construction: should the term “wiring line” in claim 7 be construed broadly enough to encompass a collection of lines separated by a sample hold circuit? In order to determine that Fujikawa discloses or teaches the recited wiring lines, we would need to answer this question in the affirmative. Yet, as discussed above, neither party proposes construing “wiring line,” or any other term used in the claims of the ’606 patent. Pet. 18; Prelim. Resp. 7. The failure to argue for and sufficiently support a broad construction of the term “wiring line” means that Petitioner does not show sufficiently, for purposes of supporting institution of review, that Fujikawa discloses or teaches the “wiring line” limitation of claim 7. b) Conclusion Regarding Claim 7 Based on the record presented, we determine that Petitioner has not shown that there is a reasonable likelihood that Petitioner will prevail in demonstrating that claim 7 is unpatentable as anticipated by or obvious in view of Fujikawa.” slip op. at 11
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,557,606 - PTAB · Dec 16, 2024 · IPR2024-00973 · APJ George R Hoskins · IPR · Institution
The Board instituted IPR of claims 1–18 on all asserted grounds, finding a reasonable likelihood that BOE would prevail on claim 4 over Reiner.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“We secondly conclude Petitioner’s stipulation is commensurate in scope with a Sotera stipulation. See Sotera, Paper 12, at 13–14, 18–19; Guidance Memo, at 3. The Guidance Memo states: Consistent with Sotera Wireless, Inc., the PTAB will not discretionarily deny institution in view of parallel district court litigation where a petitioner presents a stipulation not to pursue in a parallel proceeding the same grounds or any grounds that could have reasonably been raised before the PTAB. Guidance Memo, 3, 7–8. Thus, applying that guidance here, we do not deny institution in view of the Co-Pending Litigation.” slip op. at 9
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We conclude the preliminary record supports, sufficiently to justify institution, Petitioner’s contention that a person of ordinary skill in the art would have been motivated to configure Reiner’s gate/scanning driver 63 to include the ESD protection network structure illustrated in Figure 5. First, we agree with Petitioner’s position that Reiner discloses both of its display drivers 61 and 63 would benefit from ESD protection. That is, Reiner describes display drivers 61 and 63 as “typical example[s]” of integrated circuit devices that can benefit from utilizing Reiner’s bump bridge technology for providing ESD protection, due to the large number of parallel output lines that must cross power supply lines. See Ex. 1005, 4:15–16, 9:11–20 (describing Fig. 4), 12:4–5. Thus, based on this preliminary record, we disagree with Patent Owner’s position that Petitioner mischaracterizes Reiner’s teachings in this regard. Second, based on the preliminary record, Dr. Murphy’s testimony that the ESD protection network structure of Reiner’s Figure 5 would be suitable for implementing in Reiner’s gate/scanning driver 63 due to similarities between the two drivers is supported by the evidence sufficiently to justify institution. See Ex. 1003 ¶¶ 104–105, 111–120. A first similarity is Reiner’s indication that both display drivers 61 and 63 “have areas where the output or input metal lines have to cross power supply lines” Vdd and Vss. Ex. 1005, 9:11–20, 12:4–5, Fig. 3 (illustrating exemplary integrated circuit device 30 powered by supply voltages Vdd and Vss). A second similarity is Dr. Murphy’s testimony that, at least in some embodiments of Reiner’s gate/scanning driver 63, “each of the [scan] lines being driven will have its own semiconductor units . . . [that] drive that particular line,” akin to the individual output devices 70 and source lines 67 of Figure 5. Ex. 1003 ¶¶ 113, 117; see also Prelim. Resp. 21–22 (arguing “Reiner [discloses] that the gate driver integrated circuit comprises individual gate drivers” and “a POSITA would understand that individual gate/scan line drivers are coupled to one another”). These similarities between Reiner’s display drivers 61 and 63 support Dr. Murphy’s conclusion that Reiner’s bump bridge technology for providing ESD protection could and would have been implemented in Reiner’s gate/scanning driver 63 in the same fashion as illustrated in Figure 5 for Reiner’s source/data driver module 61. We appreciate, as Dr. Schubert testifies, that the individual circuits in gate/scanning driver 63 will drive their respective gate/scan lines 68 in different ways than the individual output devices 70 in source/data driver module 61 will drive their respective source/data lines 67. See Ex. 2001 ¶¶ 55–59. Nonetheless, based on the present record, we conclude such differences in the signal outputs of Reiner’s display drivers 61 and 63 have little to do with the benefits of configuring the power inputs of the display drivers to protect the individual circuits from electrostatic discharge events, or how to do so.” slip op. at 35
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“We conclude the preliminary record supports, sufficiently to justify institution, Petitioner’s contention that a person of ordinary skill in the art would have been motivated to configure Reiner’s gate/scanning driver 63 to include the ESD protection network structure illustrated in Figure 5. First, we agree with Petitioner’s position that Reiner discloses both of its display drivers 61 and 63 would benefit from ESD protection. That is, Reiner describes display drivers 61 and 63 as “typical example[s]” of integrated circuit devices that can benefit from utilizing Reiner’s bump bridge technology for providing ESD protection, due to the large number of parallel output lines that must cross power supply lines. See Ex. 1005, 4:15–16, 9:11–20 (describing Fig. 4), 12:4–5. Thus, based on this preliminary record, we disagree with Patent Owner’s position that Petitioner mischaracterizes Reiner’s teachings in this regard. Second, based on the preliminary record, Dr. Murphy’s testimony that the ESD protection network structure of Reiner’s Figure 5 would be suitable for implementing in Reiner’s gate/scanning driver 63 due to similarities between the two drivers is supported by the evidence sufficiently to justify institution. See Ex. 1003 ¶¶ 104–105, 111–120. A first similarity is Reiner’s indication that both display drivers 61 and 63 “have areas where the output or input metal lines have to cross power supply lines” Vdd and Vss. Ex. 1005, 9:11–20, 12:4–5, Fig. 3 (illustrating exemplary integrated circuit device 30 powered by supply voltages Vdd and Vss). A second similarity is Dr. Murphy’s testimony that, at least in some embodiments of Reiner’s gate/scanning driver 63, “each of the [scan] lines being driven will have its own semiconductor units . . . [that] drive that particular line,” akin to the individual output devices 70 and source lines 67 of Figure 5. Ex. 1003 ¶¶ 113, 117; see also Prelim. Resp. 21–22 (arguing “Reiner [discloses] that the gate driver integrated circuit comprises individual gate drivers” and “a POSITA would understand that individual gate/scan line drivers are coupled to one another”). These similarities between Reiner’s display drivers 61 and 63 support Dr. Murphy’s conclusion that Reiner’s bump bridge technology for providing ESD protection could and would have been implemented in Reiner’s gate/scanning driver 63 in the same fashion as illustrated in Figure 5 for Reiner’s source/data driver module 61. We appreciate, as Dr. Schubert testifies, that the individual circuits in gate/scanning driver 63 will drive their respective gate/scan lines 68 in different ways than the individual output devices 70 in source/data driver module 61 will drive their respective source/data lines 67. See Ex. 2001 ¶¶ 55–59. Nonetheless, based on the present record, we conclude such differences in the signal outputs of Reiner’s display drivers 61 and 63 have little to do with the benefits of configuring the power inputs of the display drivers to protect the individual circuits from electrostatic discharge events, or how to do so.” slip op. at 35
- Skill levelSkill level petitioner adoptedDecided for petitioner
“to the ’157 patent “would have had at least a Bachelor’s degree in electrical engineering, computer science, physics, or a similar field and at least two years of experience designing semiconductor display devices, including LCD displays,” and “[a]dditional relevant work experience can compensate for less education, and vice versa.” Pet. 15–16; Ex. 1003 ¶¶ 75–76. “Patent Owner does not dispute the level of skill for a person of ordinary skill in the art . . . set forth in the Petition.” Prelim. Resp. 14; Ex. 2001 ¶¶ 19–20. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears to be consistent with the ’157 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 9,184,157 - Samsung Display Co., Ltd. v. Pictiva Displays Internaltional Ltd.Institution deniedPTAB · Nov 19, 2024 · IPR2024-00855 · APJ Grace Karaffa Obermann · IPR · Institution
The Board denied institution of IPR challenging claims 1–5 and 8–14, exercising § 314(a) discretion under Fintiv because the factors favored denial and the merits were not compelling.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivDenied
“We consider the following factors to assess “whether efficiency, fairness, and the merits support the exercise of authority to deny institution in view of an earlier trial date in the parallel proceeding.” 1. whether the court granted a stay or evidence exists that one may be granted if a proceeding is instituted; 2. proximity of the court’s trial date to the Board’s projected statutory deadline for a final written decision; 3. investment in the parallel proceeding by the court and the parties; 4. overlap between issues raised in the petition and in the parallel proceeding; 5. whether the petitioner and the defendant in the parallel proceeding are the same party; and 6. other circumstances that impact the Board’s exercise of discretion, including the merits. Fintiv, Paper 11 at 5–6.” slip op. at 7
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied fintivInstitution denied
“We have authority to institute an inter partes review where a petitioner shows a reasonable likelihood of prevailing with respect to at least one challenged claim. 35 U.S.C. § 314(a); 37 C.F.R. § 42.4(a). Under appropriate circumstances, however, we may exercise our discretion under Section 314(a) and deny review without regard to whether the petitioner has met that threshold. Trial Practice Guide,3 64; see 84 Fed. Reg. 64,280 (Nov. 21, 2019). For reasons that follow, we exercise our discretion under Section 314(a) and do not institute an inter partes review.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Not reached
“On this record, we discern a genuinely-disputed issue surrounding the correct construction of the first wavelength spectrum limitation. Specifically, a question arises whether the first wavelength spectrum limitation can be 13 Neither party identifies the litigation involving Petitioner’s real parties-ininterest as related to this proceeding. Pet. 1; Paper 5, 1. That litigation, however, involves assertions of the ’547 patent claims against Samsung Electronics Co., Ltd., and Samsung Electronics America, Inc. Ex. 2053, 1, 8; see Pet. 1 (identifying those entities as Petitioner’s real parties-in-interest). met by a portion of the radiation emitted by the organic layer (as argued by Petitioner); or instead, the first wavelength spectrum limitation refers to the entirety of the radiation emitted by the organic layer (as argued by Patent Owner). Compare Pet. 23–25, 57–58, with Prelim. Resp. 64–74. To be clear, we need not and, therefore, do not resolve the correct construction of the first wavelength spectrum limitation. It is enough for us to observe, on this record, that a genuinely-disputed issue surrounds this issue of claim construction. As explained in the next section, that dispute casts doubt upon whether Petitioner shows sufficiently, for purposes of trial institution, that the prior art suggests the filter transparency limitation.” slip op. at 15
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“14 Petitioner belatedly suggests that an ordinarily skilled artisan would have been prompted to replace the emitter material employed by the prior art (namely, BCzVBi in DPvBi) with a different, but undisclosed, emitter material having “no significant emission at wavelengths above 500 nm.” Opp. Supp. Br. 2 (citing Ex. 2010 ¶ 43); see Reply 3–4 (same). That argument is not presented in the Petition, much less supported in the Petition by a rationale to combine. See Pet. 16–17, 48–50 (mapping the organic layer sequence of claim 1 to the organic layer sequence of Igarashi or Shiotani, which both employ BCzVBi in DPvBi as the emitter material (Ex. 1004 ¶ 88; Ex. 1005, 5/12)).” slip op. at 17
Claim construction§ 103 obviousnessDiscretionary denialPatents in suitUS 8,314,547 - Kohler Co. v. Delta Faucet Co.InstitutedPTAB · Oct 4, 2024 · IPR2024-00700 · APJ Jane E Inglese · IPR · Institution
The Board instituted IPR on claims 1–24 and all asserted grounds, finding a reasonable likelihood that Kohler would prevail on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Petitioner provides sufficient information for purposes of institution to show that Tseng discloses or would have suggested a translucent light pipe defining a closed loop to diffuse light from light emitters outwardly away from a housing. Tseng’s Figures 30 and 37 show that rib 371 and protrusion 383 of translucent light conductors 37, 38 (light pipes), respectively, are both shaped as unbroken circles. Ex. 1004, Figs. 37, 38; see also id. ¶ 24 (describing “circular” rib), ¶ 26 (indicating that the “light conductor is formed in a sleeve shape”). Tseng discloses that light from LED elements 40 enters input face 311 of Tseng’s light conductors 37, 38, travels through transmission portion 312, and is emitted through downward facing output face 313. Ex. 1004 ¶¶ 91, 94, 97, 98, Figs. 30, 31, 35, 36, 37. Light is also emitted from outwardly extending annular rib 371 and protrusion 383 of light conductors 37, 38, respectively, which “enhance[s] light transmission.” Id. Petitioner, therefore, provides sufficient information to show that Tseng’s translucent light conductors 37, 38 (light pipes) define a closed loop to diffuse light from LED elements 40 (light emitters) outwardly away from external sleeve 34 (housing).” slip op. at 18
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art (“POSITA”) would have had a degree in industrial design or an equivalent field, and two years of professional experience working with kitchen, bath, or other plumbing fixtures (or similar products), or an equivalent level of skill, knowledge, and experience. Pet. 14. Petitioner asserts that a POSITA also would have been aware of, and generally knowledgeable about, the standard features and functionality of kitchen, bath, or other plumbing fixtures (or similar products). Id. Patent Owner neither adopts nor disputes Petitioner’s proposed level of ordinary skill in the art. Prelim. Resp. 10. For purposes of this Decision, we apply Petitioner’s definition of a POSITA, which is undisputed on this record, and is consistent with the level of ordinary skill in the art at the time of the invention as reflected in the asserted prior art.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“C. Claim Interpretation We interpret claims “using the same claim construction standard that would be used to construe the claims in a civil action held under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). Under that standard, claim terms generally are given their plain and ordinary meaning as would have been understood by the ordinarily skilled artisan at the time of the invention when read in the context of the specification and prosecution history. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). We construe terms in controversy only to the extent necessary to resolve the controversy. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner asserts that the claim terms do not require construction and should be afforded their plain and ordinary meaning. Pet. 13. Patent Owner contends that it “has applied the plain and ordinary meaning of the claim terms.” Prelim. Resp. 10. Taking into consideration the information presented, we determine that none of the claim terms requires express construction for purposes of deciding whether to institute review.7” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“its sprayhead by routing an electric wire connected to an external power supply through the shower head. Pet. 44 (citing Ex. 1004 ¶ 68, Figs. 1–5). Petitioner asserts that because Tseng’s shower head is designed to be pulled out, the wire is subject to stress and strain, which could lead to failure over time. Id. (citing Ex. 1003 ¶¶ 251–253). According to Petitioner, incorporating Mizuno’s hydroelectric generator into Tseng’s shower head would obviate the need for an external power supply or battery, which would reduce installation and operation costs, prevent a potential wiring failure, and eliminate periodic battery replacement. Id. at 45 (citing Ex. 1003 ¶¶ 257–260). Petitioner asserts that a person of ordinary skill in the art, therefore, would have been motivated to incorporate Mizuno’s hydroelectric generator into Tseng’s shower head, and would have had a reasonable expectation of success in doing so because Mizuno’s hydroelectric generator is designed and intended to be integrated into a faucet’s shower head to reliably power LEDs. Id. at 45–46 (citing Ex. 1008 ¶¶ 1, 2). Patent Owner counters that a person of ordinary skill in the art would not have had any reason to modify Tseng in view of Mizuno. Prelim. Resp. 32. Patent Owner contends that Tseng expressly set out to develop a design that includes electrical wiring, and did so successfully by improving the integration of electrical wiring into its shower head design. Id. at 33–34 (citing Ex. 1004 ¶¶ 9, 102–110). Patent Owner further contends that a person of ordinary skill in the art would not have been motivated to completely redesign Tseng’s shower head to change the power source entirely to eliminate wiring. Id. Patent Owner contends that a person of ordinary skill in the art also would not have had a reasonable expectation of success in incorporating Mizuno’s hydroelectric generator into Tseng’s shower head because Tseng explicitly discloses that the space in its shower head is narrow. Id. at 36 (citing Ex. 1004 ¶¶ 7, 108). According to Patent Owner, Mizuno’s hydroelectric generator requires room for additional components beyond the hydrogenator, including a voltage stabilizer, cooling components, and a relief valve, which Patent Owner contends would have discouraged the ordinarily skilled artisan from a major redesign of Tseng’s faucet necessary to incorporate these elements. Id. at 37. We have considered Petitioner and Patent Owner’s assertions for ground 2. Because Petitioner demonstrates a reasonable likelihood of prevailing in its challenge to the patentability of claim 1 for ground 1, resolution of the disputed factual issues raised by Petitioner and Patent Owner in ground 2 is best left for trial after full development of the record.” slip op. at 22
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 10,393,363 - PTAB · Sep 27, 2024 · IPR2024-00649 · APJ Sheridan K Snedden · IPR · Institution
The Board instituted IPR of claims 1–28 on all six asserted grounds, finding a reasonable likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). The Supreme Court has held that a decision to institute under 35 U.S.C. § 314 may not institute on less than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018). After considering the information presented by the parties, we determine that Petitioner has demonstrated a reasonable likelihood of success in proving that at least one of claims 1–28 of the ’187 patent are unpatentable.” slip op. at 2
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“Anticipation is a question of fact, as is the question of what a prior art reference teaches. In re NTP, Inc., 654 F.3d 1279, 1297 (Fed. Cir. 2011). “Because the hallmark of anticipation is prior invention, the prior art reference—in order to anticipate under 35 U.S.C. § 102—must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements ‘arranged as in the claim.’” Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1369 (Fed. Cir. 2008) (quoting Connell v. Sears, Roebuck & Co., 722 F.2d 1542, 1548 (Fed. Cir. 1983)). Whether a reference anticipates a claim is assessed from the skilled artisan’s perspective. See Dayco Prods., Inc. v. Total Containment, Inc., 329 F.3d 1358, 1368 (Fed. Cir. 2003) (“[T]he dispositive question regarding anticipation [i]s whether one skilled in the art would reasonably understand or infer from the [prior art reference’s] teaching that every claim element was disclosed in that single reference.” (quoting In re Baxter Travenol Labs., 952 F.2d 388, 390 (Fed. Cir. 1991))).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“The obviousness inquiry also typically requires an analysis of “whether there was an apparent reason to combine the known elements in the fashion claimed by the patent at issue.” KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007) (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006) (requiring “articulated reasoning with some rational underpinning to support the legal conclusion of obviousness”)). A petitioner cannot prove obviousness with “mere conclusory statements.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016). Rather, a petitioner must articulate a sufficient reason why a person of ordinary skill in the art would have combined the prior art references. In re NuVasive, Inc., 842 F.3d 1376, 1382 (Fed. Cir. 2016).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Petitioner argues that we need not construe any terms of the challenged claims to resolve the issues presented in the Petition. Pet. 11. We determine that no express construction of any claim term is necessary to determine whether to institute inter partes review. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Matal, 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). To the extent further discussion of the meaning any claim term is necessary to our decision, we provide that discussion below in our analysis of the asserted grounds of unpatentability.” slip op. at 8
Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,629,187 - PTAB · Sep 27, 2024 · IPR2024-00650 · APJ Deborah Katz · IPR · Institution
The Board instituted IPR of claims 1–38 on all asserted grounds, finding a reasonable likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Director determines that the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). We determine whether to institute an inter partes review on behalf of the Director. See 37 C.F.R. § 42.4(a).” slip op. at 2
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“determined to be microsatellite instability high or DNA mismatch repair deficient were placed into a study arm and then treated with pembrolizumab. (See Ex. 1005, Ex. 1003 ¶¶ 60–73.) Because treatment of the patients was performed only after MSI-H status was determined, the MSI-H Study Record teaches treating the patients “in response to” determining their MSI- H status.” slip op. at 15
- Obviousness (§103) › Motivation to combine / reasonable expectation of successInstituted
“have been expected, Petitioner cites to Brown as teaching that PD-1 inhibitors are inherently more effective when treating tumors comprised of cells that are easy for immune cells to recognize. (See Pet. 41 (citing Ex. 1034, 747).) Petitioner argues further that Duval teaches that MSI-H cancers have cells that are easy for immune cells to recognize. (See Pet. 41 (citing Ex. 1087, 5002).) Dr. Neugut’s testimony supports Petitioner’s argument that the cited teachings of Brown and Duval, as well as other references, would have motivated a person of ordinary skill in the art to obtain the results of the MSI-H Study Record. (See Ex. 1003 ¶¶ 124, 130, 132; see Pet. 41.) Petitioner argues further that Brown and Duval would have motivated one of ordinary skill in the art to obtain the results of the MSI-H Study Record by treating patients with common types of MSI-H cancers, including endometrial, small bowel, and gastric cancers. (See Pet. 41 (citing Ex. 1003 ¶ 130).) Petitioner argues further that the state of the art, as demonstrated by Brown and Duval, as well as other references, would have provided one of ordinary skill in the art with a reasonable expectation of success because physicians were successfully treating patients with cancers that were known to be MSI-H with PD-1 inhibitors. (See Pet. 42 (citing Ex. 1003 ¶¶ 131, 132).)” slip op. at 18
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that one of ordinary skill in the art relevant to the ’219 patent would have been a medical doctor or a professional in a related field with at least five years of experience with treating cancer. (See Pet. 11 (citing Neugut Decl., Ex. 1003 ¶19).) Petitioner argues further that the ordinarily skilled artisan would have experience in or access to a person with knowledge of clinical studies for therapeutics and how they work and to a pathologist with comparable experience. (See id.) Dr. Neugut’s testimony supports Petitioner’s arguments regarding the level of skill that an ordinarily skilled artisan in the relevant field would have. (See Ex. 1003 ¶ 19.) Accordingly, in the analysis below, and in the absence of argument by Patent Owner to the contrary, we apply the level of skill set forth by Petitioner and refer to Dr. Neugut’s testimony of what one of ordinary skill in the art would have understood at the time the application that became the ’491 patent was filed, which does not appear to be inconsistent with the level of skill reflected in the asserted prior art.” slip op. at 8
Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,634,491 - PTAB · Sep 23, 2024 · IPR2024-00624 · APJ Sheridan K Snedden · IPR · Institution
The Board instituted IPR on claims 1–4, 6–10, and 12–15 on all petitioned grounds, finding a reasonable likelihood of success on at least one challenge and declining Fintiv denial.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). The Supreme Court has held that a decision to institute under 35 U.S.C. § 314 may not institute on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018). After considering the information presented by the parties, we determine that Petitioner has demonstrated a reasonable likelihood of success in proving that at least one of claims 1–4, 6–10, and 12–15 of the ’975 patent are unpatentable.” slip op. at 2
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“invention was patented, described in a printed publication, or in public use, on sale, or otherwise available to the public before the effective filing date of the . . . .” 35 U.S.C. § 102(a). To be anticipated, each and every element of the claim must be found, either expressly or inherently described, in a single prior art reference. See Atofina v. Great Lakes Chem. Corp., 441 F.3d 991, 999 (Fed. Cir. 2006). When claim elements are inherently taught, the result must be a necessary consequence of what was deliberately intended, but the prior art need not demonstrate that the authors appreciated the results. See Mehl/Biophile Int’l Corp. v. Milgraum, 192 F.3d 1362, 1366 (Fed. Cir. 1999); see Schering Corp. v. Geneva Pharm., Inc., 339 F.3d 1373, 1377 (Fed. Cir. 2003) (“At the outset, this court rejects the contention that inherent anticipation requires recognition in the prior art.”).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Obviousness is determined by looking to the scope and content of the prior art, differences between the prior art and the claims at issue, and the level of ordinary skill in the pertinent art resolved. See Graham v. John Deere Co. of Kansas City, 383 U.S. 1, 17–18 (1966). “[T]he analysis need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.” KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007).” slip op. at 10
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“pending Maryland litigation has been stayed in its entirety pending resolution of IPR2024-00240, which involves a related patent that is also involved in the litigation. Reply, 1 (citing Order in Maryland litigation, dated June 29, 2024, Ex. 1100, 1); see Sur-Reply, 1 (acknowledging “the recent stay of the parties’ co-pending litigation involving the ’975 Patent.”). In its Memorandum Opinion, the court acknowledged that inter partes reviews of additional patents involved in the litigation could be instituted. See Ex. 1101, 3. Accordingly, the first Fintiv factor weighs heavily in favor of not exercising discretion to deny institution of inter partes review. Because of the stay, the second and third Fintiv factors also weigh heavily in favor of not exercising discretion to deny institution of inter partes review. The stay indicates that the court’s trial date will not be close to the Board’s projected statutory deadline for a final written decision and that neither the court nor the parties will invest further in the parallel proceeding. See Fintiv, at 6 (“A district court stay of the litigation pending resolution of the PTAB trial allays concerns about inefficiency and duplication of efforts. This fact has strongly weighed against exercising the authority to deny institution under NHK.”); see also Memorandum Opinion in Maryland litigation issued June 29, 2024, Ex. 1101, 2 (noting that the” slip op. at 32
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 11,325,975 - Parse Biosciences, Inc. v. 10x Genomics, Inc.All claims unpatentablePTAB · Sep 17, 2024 · IPR2023-00876 · APJ Michael J Fitzpatrick · IPR · Final written decision
Claims 1–6 are unpatentable: claims 1–4 and 6 as obvious over Linnarsson and McCloskey, and claim 5 as obvious over those references and ordinary skill.
RulingsFinal written decision- ExcludeMotion to exclude, grantedMotion to exclude, deniedGranted in part
“Clearly, the second Hall-Ellis declaration is offered to prove that McCloskey is a prior art printed publication. See, e.g., Ex. 1065 ¶50 (“In view of the foregoing, it is my opinion that [McCloskey] was publicly available no later than [January 3, 2008].”). Thus, the second Hall-Ellis declaration should have been served within ten business days of Patent Owner’s October, 27, 2023, objection to the admissibility of McCloskey. See 37 C.F.R. § 42.64(b)(2) (“The party relying on evidence to which an objection is timely served may respond to the objection by serving supplemental evidence within ten business days of service of the objection.”). Because it was not filed until March 29, 2024, Patent Owner’s Motion to Exclude is granted with respect to the second Hall-Ellis declaration. In its Opposition to the Motion to Exclude, Petitioner argues that, under Hulu LLC v. Sound View Innovations, LLC, No. IPR2018-01039, Paper 29 (Dec. 20, 2019) (precedential), it was allowed to wait until its Reply to file the second Hall-Ellis declaration. Paper 37, 1–2. The Board in Hulu does state that, “if the patent owner challenges a reference’s status as a printed publication, a petitioner may submit a supporting declaration with its reply to further support its argument that a reference qualifies as a printed publication.” Hulu, at 15 (37 C.F.R. § 42.23). However, the Board’s statement was referring to the scope of permissible reply arguments under 37 C.F.R. § 42.23(b). See Hulu at 14 (quoting 37 C.F.R. § 42.23(b)’s requirement that “[a] reply may only respond to arguments raised in the corresponding opposition, patent owner preliminary response, or patent owner response”). The Board in Hulu does not purport to interpret 37 C.F.R. § 42.64 or even discuss supplemental evidence. Petitioner clearly missed the deadline imposed by 37 C.F.R. § 42.64(b)(2), which was triggered by Patent Owner’s October 27, 2023, objection to McCloskey. Patent Owner’s Motion to Exclude is granted with respect to the second Hall-Ellis declaration (i.e., Ex. 1065).” slip op. at 16
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“We find that both references are analogous art to the ’981 patent, as there is ample supporting evidence in the record, including that to which the Reply cites (citations identified in the immediately preceding paragraph). Indeed, Patent Owner does not dispute the merits of either argument. PO Sur-Reply 27–28. Rather, Patent Owner, argues that we “should not now permit Petitioner to rewrite its clearly-deficient Petition.” Id. at 28. Petitioner’s Reply does not re-write its Petition. What Petitioner’s Reply does, in response to Patent Owner’s arguments, is precisely what Sanofi-Aventis contemplates as being proper in a reply brief. Indeed, in ruling against the petitioner in Sanofi-Aventis, the Federal Circuit specifically noted that the petitioner could have used its reply brief “to explain how [the prior art reference] is analogous to the [challenged] patent” but did not do so. 66 F.4th at 1379–1380. Here, in contrast, Petitioner used its Reply brief to explain how Linnarsson and McCloskey are analogous to the ’981 patent. Petitioner’s explanation in its Reply brief was both proper and persuasive.” slip op. at 14
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedReference is prior artDecided for petitioner
“That McCloskey is what it purports to be (a journal article) and that it was published in 2007 are corroborated by multiple pieces of evidence. McCloskey names four authors, all four of whom are named inventors of US 2007/0020640 A1, published Jan. 25, 2007 (“McCloskey ’640”). Ex. 1004, 1, Ex. 2001, code (76). Patent Owner concedes that McCloskey and McCloskey ’640 involve the same subject matter, having argued that the consideration of McCloskey ’640 supported discretionary denial of the Petition based on McCloskey. See, e.g., Prelim. Resp. 22 (“Petitioner’s secondary reference, an article by McCloskey, is at best cumulative of the far more detailed McCloskey ’640, which was raised by the Office and substantively discussed as the basis for a potential rejection using its asserted disclosure of a polynucleotide-specific tag—the same purported teaching for which Petitioner relies on McCloskey here.”). Notably, McCloskey ’640 was published on January 25, 2007. Ex. 2001, code (43). That is just days before McCloskey was received by BIOCHEMICAL GENETICS on January 31, 2007. See EX. 1004, 1 (“Received: 31 January 2007 / Accepted: 29 May 2007 / Published online: 23 October 2007”). In other words, it appears that the authors sought to have their research published in a scientific journal promptly after the subject matter of their research had been published by the Office. Further, the existence of McCloskey and its publication year of 2007 is confirmed by other sources in the record. See Ex. 1029, code (56) (United States Patent identifying as a cited reference: “McCloskey, et al. Encoding Pcr products with batch-stamps and barcodes. Biochem Genet. Dec. 2007;45(11-12):761-7. Epub Oct. 23, 2007.”); Ex. 1053, code (56) (same); Ex. 1060 (article’s bibliography citing “McCloskey ML, Stöger R, Hansen RS, Laird CD. Encoding PCR products with batch-stamps and barcodes. Biochem. Genet 2007;45:761–767. [PubMed: 17955361]”). Patent Owner’s Motion to Exclude is denied with respect to” slip op. at 19
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed
“The Petition states that “Petitioner does not believe that any terms require explicit construction in view of the prior art being presented.” Pet. 36. Despite this stated position, Petitioner proposed constructions for “multiplex-identifier (MID)” and “providing a sample.” Id. Patent Owner, in its Preliminary Response, stated that it “agrees that at this time, solely for purposes of an institution decision on the Petition, no terms require explicit construction.” Prelim. Resp. 45. In instituting the IPR, we found no need to provide an express construction of any claim term. Inst. Dec. 6. In the Patent Owner Response, Patent Owner repeats that it “does not believe any term needs construction,” but nonetheless “applies the Petition’s definitions for ‘MID’ and ‘sample.’” PO Resp. 19. The Petition defines MID as “‘a tag or combination of tags associated with a polynucleotide whose identity (e.g., the tag DNA sequence) can be used to differentiate polynucleotides in a sample.’” Pet. 36 (quoting Ex. 1001, 6:33–38). The Petition defines sample as “‘a quantity of material from a biological, environmental medical, or patient source in which detection, measurement, or labeling of target nucleic acids is sought.’” Id. (quoting Ex. 1001, 12:7– 10). We apply these same definitions in our analysis.” slip op. at 6
Patent outcomesUS 10,155,981 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,155,981 - Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentablePTAB · Sep 10, 2024 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–10 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, Rossi, and Castellani.
RulingsFinal written decision- Skill levelSkill level board ownPetitioner expert creditedDecided for petitioner
“have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products.” Pet. 31 (citing Ex. 1003 ¶ 40). In the Institution Decision, we preliminarily determined that a person of ordinary skill in the art “would have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier.” Inst. Dec. 8 (emphasis added). Neither party disputes this conclusion. PO Resp. 9; see generally Pet. Reply. As such, we adopt our preliminary definition of the ordinarily skilled artisan for purposes of this Final Written Decision.” slip op. at 8
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to at least “five years” or involved “experience with sensors for recognizing an identifier.” Inst. Dec. 8 (adopting Patent Owner’s own proposed definition of one of ordinary skill in the art); see Sur-reply 3–4 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3– 12, 102:20–104:9; Ex. 2017 ¶¶ 3–4, 8–10) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.10 See Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). The Federal Circuit has explained that “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377.” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Second, Patent Owner and Dr. Howell assert that a person of ordinary skill in the art “would have understood upon reading the second German application that the capsule features described would be intended to be combinable with each of the described embodiments.” PO Resp. 40; Ex. 2017 ¶ 61. But Patent Owner and Dr. Howell do not explain how a barcode could be used in the devices depicted in Figures 16–18, which place the detection means 2.4.2 on the outer circumference of the flange (not its underside) and rely on toothed-rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. Indeed, the second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22– 27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). At no point does the second German application identify means 2.4.2 as a barcode or suggest a barcode could be used as the detection means. The second German application also states that A person skilled in the art is also aware that for example the insertion shaft may also contain a sensor, for example a camera, clear, however, that element 27 is part of the brewing chamber, and not the capsule. Ex. 1047, 12:27–31, 13:5–8, 13:21–26, 15:36. Thus, we are not persuaded that the toothed ring is in fact on the bottom side of the flange. which senses the shape of the means 2.4.2. For example, it would be possible, in the present case, for the shape of the teeth and/or the spacing between the same to be sensed. This signal, in turn, is passed to a control means, which frees, for example, the brewing chamber if the capsule is the correct one. Ex. 1047, 14:11–19. Again, despite using a camera to determine if a capsule is “the correct one,” the second German application does not suggest using a barcode in place of the toothed-ring structure, or suggest moving the location of the detection means 2.4.2 from the outer surface to the underside of the flange. This reinforces that the inventors did not contemplate using a barcode in the embodiments depicted in Figures 16–18.” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“As asserted by Petitioner, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 48–49; Pet. Reply 23–24 (Ex. 1003 ¶¶ 184–185; Ex. 1005 ¶¶ 82–84, Fig. 5). And, although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as generally depicted in Figure 5 of Jarisch. Pet. Reply 24 (noting that Dr. Howle’s testimony on this subject is “conclusory” and depends on “bodily incorporation”). As such, we credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing.17 Ex. 1003 ¶ 184. Patent Owner further contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that 17 As discussed above, Mr. Jobin has extensive experience in the design of brewing devices. Conversely, Dr. Howle has limited experience in this field and is not one of ordinary skill in the art. Although Mr. Jobin’s testimony is more persuasive regardless of the discrepancy in experience between the two declarants, when this difference in design experience is considered, it only serves to increase the weight we give to Mr. Jobin’s testimony. there is a “snug fit” to avoid “unbalances.” PO Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of the multiple volume capsules or permit a “snug fit.” Id.; PO Resp. 28. Patent Owner’s assertion that Yoakim discloses the use of certain capsules that might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. As noted by Patent Owner, Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure. But Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch, and other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Moreover, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or even less effective. Id. (citing Ex. 2019, 36:18–37:6; Ex. 1005 ¶ 23 (Jarisch explaining that its device includes a capsule holding means and that the capsule may be successfully driven in rotation). As such, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange and that this design would allow for successfully receiving single-serve capsules and driving them in rotation. Ex. 1003 ¶¶ 182–184; Ex. 1005 ¶ 23.” slip op. at 39
Patent outcomesUS 11,230,430 unpatentable§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,230,430 - Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentablePTAB · Sep 10, 2024 · IPR2023-00502 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1–16 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, and Rapparini.
RulingsFinal written decision- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner
“To obtain the benefit of the filing date of an earlier application, Patent Owner bears the burden of producing evidence to establish where each limitation of the challenged claims is disclosed in a single priority application. Studiengesellschaft Kohle, 112 F.3d at 1564; NTP, 654 F.3d at 1276. Petitioner identifies limitations of the challenged claims that are missing from each individual German priority application. Pet. 39–42. Patent Owner responds with no evidence or arguments suggesting that the identified limitations are disclosed in a single application. Resp. 10–12. On this record, no challenged claim is entitled to the benefit of the filing date of any of the three German priority applications; therefore, Jarisch qualifies as prior art under at least 35 U.S.C. § 102(e).” slip op. at 19
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“In other words, even if we accept that Dr. Howle has some experience designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to “at least five years” or involved “experience with sensors for recognizing identifiers.” Dec. 8 (adopting Patent Owner’s own proposed definition of ordinary skill in the art); see Sur-reply 3 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3–12, 102:30– 104:9; Ex. 2017 ¶¶ 3, 4) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.12 Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–78 (Fed. Cir. 2022). The Federal Circuit has made plain that, “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” 12 To be clear, we are not saying that a witness supplying expert opinions must have satisfied the requirements of the level of ordinary skill in the art on or before the priority date of the challenged patent, which Patent Owner seems to understand. See Sur-reply 4–5. Instead, we evaluate whether Dr. Howle had at least the requisite qualifications of a person having ordinary skill in the art by the time he rendered his opinions. Osseo Imaging, LLC v. Planmeca USA, Inc., Appeal No. 2023-1627, slip op. at 7 (Fed. Cir. Sept. 4, 2024) (“[A]n expert can acquire the necessary skill later and develop an understanding of what a person of ordinary skill knew at the time of the invention,” however, where “the expert was not a person of ordinary skill at the time of the invention may well be used during cross-examination to undermine the credibility of the expert.”); see id., slip op. at 5–6 (affirmatively quoting Kyocera). Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377. “‘Admitting testimony from a person . . . with no skill in the pertinent art serves only to cause mischief and confuse the factfinder.’” That testimony would ‘amount[ ] to nothing more than advocacy from the witness stand.’” Id. (quoting Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362, 1364–65 (Fed. Cir. 2008)). Alternatively, even if we accept that Dr. Howle possesses “at least five years” of relevant design experience, on this record, we agree with Petitioner that his opinions are entitled to less weight than those of Petitioner’s witness, Mr. Jobin. Reply 27. Unlike Dr. Howle, Mr. Jobin is a designer by profession, with more than 30 years of industry experience. Reply 27 (citing Ex. 1003 ¶¶ 5–30). For example, Mr. Jobin designed a home-based beer dispensing system utilizing cartridge identification technologies. Id. (citing Ex. 1003 ¶ 24). Mr. Jobin also “has substantial experience with sensors for recognizing identifiers.” Id. (citing Ex. 1003 ¶ 19; Ex. 1072, 3712–19, 67:22–70:19). Dr. Howle, by contrast, “has never designed a beverage machine.” Reply 22; see generally Sur-reply (declining to contest that assertion).13” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“In Petitioner’s contrary view, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 45–46; Reply 21–22 (Ex. 1003 ¶¶ 194–195; Ex. 1005 ¶¶ 82–84, Fig. 5). Although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as depicted in Figure 5 of Jarisch. We credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing. Ex. 1003 ¶ 184. For reasons explained above, we assign little or no weight to Dr. Howle’s conflicting testimony because he has little or no experience designing a mechanical beverage system or similar product. See supra 10– 16. Petitioner lays out persuasive reasons why Dr. Howle’s testimony, on this particular point, is “conclusory” and rests on “bodily incorporation” of the references. Reply 24; see id. at 22–24 (pointing out with particularity fundamental flaws in Dr. Howle’s opinions); In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“It is well-established that a determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.”); In re Nievelt, 482 F.2d 965, 968 (CCPA 1973) (“Combining the teachings of references does not involve an ability to combine their specific structures.”). In addition, Patent Owner contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that there is a “snug fit” to avoid “unbalances.” Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of multiple volume capsules or permit a “snug fit” in the modified device of Yoakim. Id. at 8–9. Patent Owner’s view that Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch and, in any event, other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Furthermore, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange. Ex. 1003 ¶¶ 187–195. With respect to the argument that the use of Jarisch’s design would not allow a snug fit, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or less effective. Resp. 39–40; see Reply 22 (citing Ex. 2019, 36:18–37:6). Indeed, as Petitioner points out, Jarisch indicates that its device, including its capsule holding means, allows the capsule to be successfully driven in rotation. Reply 22 (citing Ex. 1005 ¶ 23).” slip op. at 49
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“That argument is not persuasive. A reference need not identify or discuss another prior art patent or application in order for that reference to be deemed relevant or analogous art. Nor do we endeavor to determine why, or why not, a particular reference is discussed in a prior art reference. The analogous art inquiry focuses on reasonable pertinence and involves assessing the similarities between the claimed invention and the prior art, including the problems addressed and the closeness of the subject matter, as viewed by an ordinarily skilled artisan. Donner Tech., LLC v. Pro Stage Gear, LLC, 979 F.3d 1353, 1360 (Fed. Cir. 2020); see Airbus S.A.S. v. Firepass Corp., 941 F.3d 1374, 1380-81 (Fed. Cir. 2019) (relevant analysis focuses on comparing the disclosed embodiments, function, and structure of the claimed invention to the disclosures of the prior art). Against that backdrop, we reject Patent Owner’s suggestion that the inquiry involves whether the inventors of Jarisch saw a need to discuss Yoakim’s disclosure in Jarisch’s priority document.” slip op. at 45
Patent outcomesUS 10,994,923 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,994,923
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.