- PTAB · Jan 13, 2025 · IPR2024-01156 · APJ Jeffrey N Fredman · IPR · Institution
The Board instituted inter partes review of claims 1–30 on all grounds, finding it more likely than not that the claims are unpatentable.
RulingsInstitution decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“On the current record, there is no controversy over the meaning of any of the claim terms and neither party identifies a claim construction that would impact our analysis. We therefore find that, at this stage of the proceeding, there are no terms that need claim construction. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 7
- Skill levelSkill level petitioner adoptedDecided for petitioner
“VIII. LEVEL OF ORDINARY SKILL IN THE ART Petitioner asserts (without opposition): A person of ordinary skill in the art (“POSA”) at the time of invention would have a working knowledge of microbiology and would have been involved in developing testing methodologies for analysis of samples such as food products (“validation methodologies”). The POSA would most likely have an advanced degree in microbiology, food science, or animal science and at least two years of work experience but may alternatively have a bachelor’s degree in those areas and at least four years of experience with validation methodologies. The POSA would have been familiar with relevant scientific literature and industry regulations, directives, and guidelines relating to validation methodologies.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“Determining whether claims are anticipated involves a two-step analysis. The first step involves construction of the claims of the patent at issue. Claim construction is a question of law reviewed de novo.” In re Aoyama, 656 F.3d 1293, 1296 (Fed.Cir.2011). “The second step [of an anticipation analysis] involves comparing the claims to the prior art. Anticipation is a question of fact reviewed for substantial evidence.” In re Aoyama, 656 F.3d at 1296. “A prior art reference anticipates a patent claim under 35 U.S.C. § 102(b) if it discloses every claim limitation.” In re Montgomery, 677 F.3d 1375, 1379 (Fed. Cir. 2012). A reference may anticipate inherently if a claim limitation that is not expressly disclosed “is necessarily present, or inherent, in the single anticipating reference.” Verizon Servs. Corp. v. Cox Fibernet Va., Inc., 602 F.3d 1325, 1337 (Fed. Cir. 2010). slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“The motivation-to-combine analysis is a flexible one. “[A]ny need or problem known in the field of endeavor at the time of invention and addressed by the patent can provide a reason for combining the elements in the manner claimed,” [but the] “analysis ‘need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.’” Intel Corp. v. PACT XXP Schweiz AG, 61 F.4th 1373, 1379–80 (Fed. Cir. 2023) (quoting KSR, 550 U.S. at 418, 420 (emphasis added)). “[I]f there’s a known technique to address a known problem using ‘prior art elements according to their established functions,’ then there is a motivation to combine,” because KSR explains that “if a technique has been used to improve one device [or method], and a person of ordinary skill in the art would recognize that it would improve similar devices [or methods] in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” Id. at 1380 (quoting KSR, 550 U.S. at 417; and Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 797 (Fed. Cir. 2021)). If addressing a known problem, the prior art combination need not be “the best option, only . . . a suitable option.” Id. (quoting Intel, 21 F.4th at 800 (emphasis original)).” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,845,486 - PTAB · Jan 13, 2025 · IPR2024-00186 · APJ Jeffrey N Fredman · IPR · Institution
The Board instituted inter partes review on all challenged claims and all grounds, finding a reasonable likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We have jurisdiction under 35 U.S.C. § 314, which provides that an inter partes review may not be instituted unless the information presented in the Petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” A decision to institute under § 314 may not institute on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018). In addition, if the Board institutes trial, it will “institute on all grounds in the petition.” PTAB Consolidated Trial Practice Guide, 5–6 (Nov. 2019); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”). Having considered the arguments and evidence presented in the Petition and the Preliminary Response, for the reasons described below, we institute inter partes review.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“Office (“USPTO”) issued a Memorandum titled “Interim Procedure for Discretionary Denials in AIA Post-Grant Proceedings With Parallel District Court Litigation” (“Memorandum”)11, which states, among other things, that “the PTAB will not discretionarily deny institution in view of parallel district court litigation where a petitioner presents a stipulation not to pursue in a parallel proceeding the same grounds or any grounds that could have 11 Available at www.uspto.gov/sites/default/files/documents/interim_proc_ discretionary_denials_aia_parallel_district_court_litigation_memo_2022 0621_.pdf. reasonably been raised before the PTAB.” Memorandum 3 (citing Sotera Wireless, Inc. v. Masimo Corp., IPR2020-01019, Paper 12 (PTAB Dec. 1, 2020) (precedential as to § II.A)). By email dated November 25, 2024, Petitioner requested leave to file a Reply to Patent Owner’s Preliminary Response to address, inter alia, its proposed submission of a Sotera stipulation. Ex. 3001. We denied Petitioner’s request for briefing, but granted its request to submit the stipulation. Id. The Sotera stipulation avers that “if IPR Nos. IPR2024- 00183, IPR2024-00185, and IPR2024-00186 are instituted, National Beef will not pursue in the related district court proceeding, Inst. for Envtl. Health, Inc. v. Nat’ / Beef Packing Co., LLC, No. 1:23-cv-00826 (D. Del. Aug. 1, 2023), any ground National Beef raised or reasonably could have raised in the aforementioned IPRs,” and that the stipulation “binds National Beef in the related district court proceeding, Inst. for Envtl. Health, Inc. v. Nat'l Beef Packing Co., LLC, No. 1:23-cv-00826 (D. Del. Aug. 1, 2023).” Ex. 1064. Applying the guidance provided in the Memorandum, we decline to exercise our discretion to deny institution in this proceeding under Fintiv because Petitioner submitted a Sotera stipulation.” slip op. at 20
- BurdenInstituted
“Thus, Petitioner has accounted for each step/element of independent claims 1 and 37 as taught by the combination of ICMSF and Gombas, and has also provided a reason why, with rational underpinnings, the prior art would have been combined and modified, with a reasonable expectation of success. On the current record, including Patent Owner’s arguments that we considered and are addressed in detail below, Petitioner’s evidence for this ground is sufficient to provide a reasonable likelihood of success in demonstrating unpatentability of at least one claim.” slip op. at 31
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“We agree with Patent Owner that the term “lots” does not require construction because on the current record, there is no controversy over the meaning of the term, and neither Petitioner nor Patent Owner identify any way that claim construction may impact our decision. We also agree with Patent Owner that the ’771 patent provides definitions that guide the understanding of the term “lots” including: The term “test lot” or “reportable lot” as used herein to refer to an assemblage of one or more specimens of a medium or process (e.g. assemblage of specimens of air, water, solids or of products of a production process, etc.), where such assemblage can be sampled by taking portions of the one or more specimens thereof, and where the one or more specimens of the assemblage are operationally linked in a manner (e.g., proximity, time, process step, etc.) whereby information derived about sampled portions is operationally applicable to all specimens of the assemblage, and thus to the test lot. In particular instances, portions are synonymous with specimens. Ex. 1003, 5:43‒54. The ’771 patent similarly provides definitions for “product portion,” “test lot sample,” and “composite lot-unit” that provide significant guidance and clarity as to the meaning of these terms. Ex. 1003, 5:60‒6:4, 6:12‒29, 7:49‒63. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We decline to expressly interpret this term at this time.” slip op. at 11
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,637,771 - PTAB · Jan 13, 2025 · IPR2024-00185 · APJ Robert A Pollock · IPR · Institution
The Board instituted IPR on claims 1–7, 11, 12, 14–20, 22–24, 26, and 29–36 on all asserted grounds, finding a reasonable likelihood of success on obviousness.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“III. CONCLUSION After considering the evidence and arguments presented in the Petition, we determine that Petitioner has demonstrated a reasonable likelihood of success in proving that at least one challenged claim of the ’143 Patent is unpatentable. In particular, because Petitioner has demonstrated a reasonable likelihood that at least one claim is rendered obvious by the asserted combinations of ICMSF, Hughes, and Price, we institute inter partes review on all grounds set forth in the Petition. At this stage of the proceeding, the Board has not made a final determination as to the patentability of any challenged claim or the construction of any claim term. Thus, our view with regard to any conclusion reached in the foregoing could change upon consideration of Patent Owner’s merits response and completion of the record.” slip op. at 54
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We agree with Patent Owner that the term “lots” does not require construction because on the current record, there is no controversy over the meaning of the term, and neither Petitioner nor Patent Owner identify any way that claim construction may impact our decision. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We also agree with Patent Owner that the ’143 patent provides definitions that guide the understanding of the term “lots” including teaching: The term “test lot” or “reportable lot” as used herein to refer to an assemblage of one or more specimens of a medium or process (e.g. assemblage of specimens of air, water, solids or of product of a production process, etc.) where such assemblage can be sampled by taking portions of the one or more specimens thereof, and where the one or more specimens of the assemblage are operationally linked in a manner (e.g. proximity, time, process step, etc.) whereby information derived about sampled portions is operationally applicable to all specimens of the assemblage, and thus to the test lot. In particular instances, portions are synonymous with specimens. Ex. 1002, 5:34–45. The Specification similarly provides definitions for “product portion,” “test lot sample,” and “single-unit production lot” that provide significant guidance and clarity as to the meaning of these terms. Id. at 5:52–63, 6:2–20.” slip op. at 16
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“validation” as used herein with respect to production lots refers to determining that a particular sample tests negative using the detection assay. Where a modular composite sample tests negative, all single-unit production lot samples comprising the composite sample are validated along with the respective single-unit production lots, which are thus cleared for release. Where a modular composite sample tests positive, individual single unit production lots may nonetheless yet be validated if particular respective single-unit production lot samples test negative. Ex.1002, 7:15–24 (emphasis added). The above text expressly equates “validation” to a determination that “a particular sample tests negative.” The initial definitional sentence makes no mention of “cleared for release” as necessary for “validation.” The subsequent sentence refers to “cleared for release” in the more limited situation where a particular composite sample “tests negative all single-unit production lot samples,” and, even then, the “cleared for release” language indicates a separate step that may happen after the samples are “validated.” slip op. at 21
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“On the current record, we are not persuaded that Petitioner has insufficiently articulated a motivation to combine or modify the asserted references. With respect to Ground 1, for example, Petitioner contends that one of ordinary skill in the art would have been motivated to modify ICMSF based on Gombas under the teaching-suggestion-motivation test so portions of the enriched, retained samples are further tested after a positive test of a composite sample by the same protocol, with a reasonable expectation of success for efficient validation. See § XII-A-1-h supra; Dickson ¶¶ 417-19. Pet. 53–54. Petitioner further argues that ordinarily skilled artisan would have sought to improve[] ICMSF with the similar methods of Gombas to yield efficient validation, which is a predictable result. KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 417 (2007). In this combination, a POSA would have simply substituted steps of ICMSF, as described above, with those of Gombas so portions of the enrichment cultures are retained and are further tested after a positive test of a composite sample by the same protocol for predictably efficient validation. MPEP § 2143(I)(B); Dickson ¶ 420. Id. at 53. As such, the Petition provides specific reasons to combine ICMSF and Gombas that are consistent with the flexible test recited in KSR, including the benefit of efficient validation of the test and that the combination is a simple substitution of steps. As KSR notes, “if a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR, 550 US at 417. Here, Petitioner has made its reasons to combine explicit. See Pet. 53–” slip op. at 47
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSRPatents in suitUS 8,822,143 - PTAB · Jan 13, 2025 · IPR2024-00183 · APJ Robert A Pollock · IPR · Institution
The Board instituted IPR on claims 1–6, 10, 11, 13–20, 22, 23, and 26–33 because the asserted combinations of ICMSF, Hughes, and Price showed a reasonable likelihood that at least one claim was obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“314. An inter partes review may not be instituted unless “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Further, a decision to institute may not do so on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018); 37 C.F.R. § 42.108(a). After considering the evidence and arguments presented in the Petition, we determine that Petitioner demonstrates a reasonable likelihood of prevailing in showing that at least one of the challenged claims of the ’584 patent is unpatentable. Accordingly, we institute an inter partes review as to the challenged claims of the ’584 patent on the grounds of unpatentability set forth in the Petition. A.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art at the time of the invention (POSA/POSITA), “would most likely have an advanced degree in microbiology, food science, or animal science and at least two years of work experience but may alternatively have a bachelor’s degree in those areas and at least four years of experience with validation methodologies.” Pet. 11. (citing Ex. 1041 ¶¶ 22–24). Petitioner further contends that a person of ordinary skill in the art would have had “a working knowledge of microbiology,” “would have been involved in developing sampling and testing methodologies for analysis of food products (“validation methodologies”),” and “would have been familiar with relevant scientific literature and industry regulations, directives, and guidelines relating to validation methodologies.” Id.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We agree with Patent Owner that the term “lots” does not require construction because on the current record, there is no controversy over the meaning of the term, and neither Petitioner nor Patent Owner identify any way that claim construction impacts the decision. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 16
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“This definition requires that a “validation” determines that “a particular sample tests negative.” The initial definition sentence makes no mention of “cleared for release” as necessary for “validation.” Rather, the definition only refers to “cleared for release” in the more limited situation where a particular composite sample “tests negative all single-unit production lot samples,” and even then, the “cleared for release” is a separate step that occurs after the samples are “validated.”” slip op. at 21
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSRPatents in suitUS 7,534,584 - Boe Technology Group Co., Ltd. v. 138 East LCD Advancements LimitedInstitution deniedPTAB · Dec 16, 2024 · IPR2024-00976 · APJ Grace Karaffa Obermann · IPR · Institution
The Board denied institution because BOE did not show a reasonable likelihood of prevailing on claims 1–3 under any of its three obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“We have authority to institute an inter partes review where a petitioner shows a reasonable likelihood of prevailing with respect to at least one challenged claim. 35 U.S.C. § 314(a); 37 C.F.R. § 42.4(a). For reasons that follow, Petitioner does not meet that evidentiary threshold. We decline to reach the issues raised in the Reply or Sur-reply, which relate to Patent Owner’s alternative argument that a discretionary denial of the Petition is warranted.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“education could substitute for professional experience and vice versa.” Pet. 26. Patent Owner “does not dispute the level of skill for a person of ordinary skill in the art” as “set forth in the Petition.” Prelim. Resp. 11. For purposes of this Decision, we adopt Petitioner’s unopposed definition (Pet. 26) because, on this record, it is consistent with the specification. We take note that neither party indicated that the result would change under any different definition.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We construe terms in controversy only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner discusses the terms a “data line having a broad-width portion” and a “scanning line having a broad-width portion” recited in claim 1, as well as a “data line having a broad portion” and a “scanning line having a broad-width portion” recited in claim 2. Petitioner cites the ’079 patent for “offering a lexicographic definition of the term ‘broad width’” to support the plain meaning interpretation of the terms “‘broad-width portion’ and ‘broad portion’ as a portion that is broader than another portion of the subject element.” Pet. 16. Patent Owner does not provide arguments directed specifically to Petitioner’s proposed claim constructions. See Prelim. Resp. 10–11. Taking account of the information presented, we determine that no claim term requires express construction for purposes of deciding whether to institute review. Compare Pet. 16 (addressing issues of claim construction, citing the ’079 patent for supporting the plain and ordinary meaning of “broad-width portion” and “broad portion” without demonstrating that an express construction is necessary to resolve whether to institute review), with Prelim. Resp. 10–11 (addressing the merits of Petitioner’s challenges, without asserting an express claim construction). To the extent that the scope of any claim term requires discussion, however, we provide it in the following analysis of the challenges.” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Id. (emphasis added). Sato ¶ 26 is entirely silent on scan lines and clearly links the cited benefits to “this arrangement” of “data lines composed of an Al film.” Id. Importantly, Petitioner does not connect Sato’s disclosure, relating to benefits associated with a data line arrangement, to any particular arrangement of scan lines. Sato ¶ 28 is equally deficient. Sato ¶ 28 also discusses benefits of utilizing a specific “arrangement,” namely, “capacitance lines formed of [a] metal film.” Id. ¶ 28. [0028] With this arrangement, the provision of the function as the shading layer with the capacitance lines formed of the metal film, the polysilicon film, or the like, in addition to the function as the wiring, as well as the provision of the function as the light absorption layer with the capacitance electrodes formed of the polysilicon film, or the like, in addition to the function as electrodes, prevents the laminated structure from becoming complex by additionally forming a dedicated shading layer and a dedicated light absorption layer. Accordingly, this arrangement is very advantageous by simply arranging the electro-optical device, and simplifies a manufacturing process thereof. Id. (emphasis added). Here again, Sato ¶ 28 is entirely silent on scan lines and clearly links the cited benefits to “this arrangement” of “capacitance lines formed of metal film.” Id. Petitioner does not bridge the gap in its rationale to combine by attempting to explain why an ordinarily skilled artisan would have extrapolated benefits, pertaining to an arrangement of capacitance lines, to a similar arrangement of scan lines. Petitioner’s witness, Dr. Flasck, provides no further insight as to how or why Sato ¶¶ 26 and 28 would have been understood to apply to scan lines. Dr. Flasck’s comments on Sato ¶¶ 26 and 28 merely repeat, nearly verbatim, the Petition’s conclusory contentions. See Ex. 1002 ¶ 139 (Dr. Flasck declaring “Sato specifically teaches that its device ‘is very advantageous by simply arranging the electro-optical device, and simplifies a manufacturing process thereof.’”); Pet. 37. Dr. Flasck does not cite to any additional supporting evidence other than Sato ¶¶ 26 and 28. Ex. 1002 ¶ 139.” slip op. at 15
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 7,502,079 - Boe Technology Group Co., Ltd. v. 138 East LCD Advancements LimitedInstitution deniedPTAB · Dec 16, 2024 · IPR2024-00977 · APJ Christopher M Kaiser · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of proving claims 7–13 and 15–20 unpatentable on any asserted ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“determine whether to institute an inter partes review under 35 U.S.C. § 314 and 37 C.F.R. § 42.4(a). Inter partes review may not be instituted unless “the information presented in the petition filed under [35 U.S.C.] section 311 and any response filed under [35 U.S.C.] section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). “When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2023).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had at least a Bachelor’s degree in electrical engineering, computer science, physics, or a similar field and at least two years of experience designing semiconductor display devices, including LCD displays.” Pet. 19. Petitioner also asserts that “[a]dditional relevant work experience can compensate for less education, and vice versa.” Id. On the record presented, Patent Owner “does not dispute the level of skill for a person of ordinary skill in the art . . . set forth in the Petition.” Prelim. Resp. 8. Neither party explains why the outcome of this case would be affected by the adoption of any particular proffered definition of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’606 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“As discussed below, we are able to determine whether to institute review without resolving the construction of any claim terms. Accordingly, we need not and do not construe any terms expressly. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“view. First, as Petitioner admits, data line 6a is not connected to image signal line 101d and line 109 other than when sample hold circuit 101c connects them due to shift register 101b outputting an enabling signal. Pet. 49. This is supported by the layout of the four elements in Fujikawa’s Figure 2. Ex. 1005, Fig. 2 (depicting sample hold circuits 101c between and connecting data lines 6a and signal lines 101d). In addition, Patent Owner’s declarant, Dr. E. Fred Schubert, testifies that “two separate lines straddling circuitry are [not] one line.” Ex. 2001 ¶ 64. The dispute between the parties on this issue is largely one of claim construction: should the term “wiring line” in claim 7 be construed broadly enough to encompass a collection of lines separated by a sample hold circuit? In order to determine that Fujikawa discloses or teaches the recited wiring lines, we would need to answer this question in the affirmative. Yet, as discussed above, neither party proposes construing “wiring line,” or any other term used in the claims of the ’606 patent. Pet. 18; Prelim. Resp. 7. The failure to argue for and sufficiently support a broad construction of the term “wiring line” means that Petitioner does not show sufficiently, for purposes of supporting institution of review, that Fujikawa discloses or teaches the “wiring line” limitation of claim 7. b) Conclusion Regarding Claim 7 Based on the record presented, we determine that Petitioner has not shown that there is a reasonable likelihood that Petitioner will prevail in demonstrating that claim 7 is unpatentable as anticipated by or obvious in view of Fujikawa.” slip op. at 11
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,557,606 - PTAB · Dec 16, 2024 · IPR2024-00973 · APJ George R Hoskins · IPR · Institution
The Board instituted IPR of claims 1–18 on all asserted grounds, finding a reasonable likelihood that BOE would prevail on claim 4 over Reiner.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“We secondly conclude Petitioner’s stipulation is commensurate in scope with a Sotera stipulation. See Sotera, Paper 12, at 13–14, 18–19; Guidance Memo, at 3. The Guidance Memo states: Consistent with Sotera Wireless, Inc., the PTAB will not discretionarily deny institution in view of parallel district court litigation where a petitioner presents a stipulation not to pursue in a parallel proceeding the same grounds or any grounds that could have reasonably been raised before the PTAB. Guidance Memo, 3, 7–8. Thus, applying that guidance here, we do not deny institution in view of the Co-Pending Litigation.” slip op. at 9
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We conclude the preliminary record supports, sufficiently to justify institution, Petitioner’s contention that a person of ordinary skill in the art would have been motivated to configure Reiner’s gate/scanning driver 63 to include the ESD protection network structure illustrated in Figure 5. First, we agree with Petitioner’s position that Reiner discloses both of its display drivers 61 and 63 would benefit from ESD protection. That is, Reiner describes display drivers 61 and 63 as “typical example[s]” of integrated circuit devices that can benefit from utilizing Reiner’s bump bridge technology for providing ESD protection, due to the large number of parallel output lines that must cross power supply lines. See Ex. 1005, 4:15–16, 9:11–20 (describing Fig. 4), 12:4–5. Thus, based on this preliminary record, we disagree with Patent Owner’s position that Petitioner mischaracterizes Reiner’s teachings in this regard. Second, based on the preliminary record, Dr. Murphy’s testimony that the ESD protection network structure of Reiner’s Figure 5 would be suitable for implementing in Reiner’s gate/scanning driver 63 due to similarities between the two drivers is supported by the evidence sufficiently to justify institution. See Ex. 1003 ¶¶ 104–105, 111–120. A first similarity is Reiner’s indication that both display drivers 61 and 63 “have areas where the output or input metal lines have to cross power supply lines” Vdd and Vss. Ex. 1005, 9:11–20, 12:4–5, Fig. 3 (illustrating exemplary integrated circuit device 30 powered by supply voltages Vdd and Vss). A second similarity is Dr. Murphy’s testimony that, at least in some embodiments of Reiner’s gate/scanning driver 63, “each of the [scan] lines being driven will have its own semiconductor units . . . [that] drive that particular line,” akin to the individual output devices 70 and source lines 67 of Figure 5. Ex. 1003 ¶¶ 113, 117; see also Prelim. Resp. 21–22 (arguing “Reiner [discloses] that the gate driver integrated circuit comprises individual gate drivers” and “a POSITA would understand that individual gate/scan line drivers are coupled to one another”). These similarities between Reiner’s display drivers 61 and 63 support Dr. Murphy’s conclusion that Reiner’s bump bridge technology for providing ESD protection could and would have been implemented in Reiner’s gate/scanning driver 63 in the same fashion as illustrated in Figure 5 for Reiner’s source/data driver module 61. We appreciate, as Dr. Schubert testifies, that the individual circuits in gate/scanning driver 63 will drive their respective gate/scan lines 68 in different ways than the individual output devices 70 in source/data driver module 61 will drive their respective source/data lines 67. See Ex. 2001 ¶¶ 55–59. Nonetheless, based on the present record, we conclude such differences in the signal outputs of Reiner’s display drivers 61 and 63 have little to do with the benefits of configuring the power inputs of the display drivers to protect the individual circuits from electrostatic discharge events, or how to do so.” slip op. at 35
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“We conclude the preliminary record supports, sufficiently to justify institution, Petitioner’s contention that a person of ordinary skill in the art would have been motivated to configure Reiner’s gate/scanning driver 63 to include the ESD protection network structure illustrated in Figure 5. First, we agree with Petitioner’s position that Reiner discloses both of its display drivers 61 and 63 would benefit from ESD protection. That is, Reiner describes display drivers 61 and 63 as “typical example[s]” of integrated circuit devices that can benefit from utilizing Reiner’s bump bridge technology for providing ESD protection, due to the large number of parallel output lines that must cross power supply lines. See Ex. 1005, 4:15–16, 9:11–20 (describing Fig. 4), 12:4–5. Thus, based on this preliminary record, we disagree with Patent Owner’s position that Petitioner mischaracterizes Reiner’s teachings in this regard. Second, based on the preliminary record, Dr. Murphy’s testimony that the ESD protection network structure of Reiner’s Figure 5 would be suitable for implementing in Reiner’s gate/scanning driver 63 due to similarities between the two drivers is supported by the evidence sufficiently to justify institution. See Ex. 1003 ¶¶ 104–105, 111–120. A first similarity is Reiner’s indication that both display drivers 61 and 63 “have areas where the output or input metal lines have to cross power supply lines” Vdd and Vss. Ex. 1005, 9:11–20, 12:4–5, Fig. 3 (illustrating exemplary integrated circuit device 30 powered by supply voltages Vdd and Vss). A second similarity is Dr. Murphy’s testimony that, at least in some embodiments of Reiner’s gate/scanning driver 63, “each of the [scan] lines being driven will have its own semiconductor units . . . [that] drive that particular line,” akin to the individual output devices 70 and source lines 67 of Figure 5. Ex. 1003 ¶¶ 113, 117; see also Prelim. Resp. 21–22 (arguing “Reiner [discloses] that the gate driver integrated circuit comprises individual gate drivers” and “a POSITA would understand that individual gate/scan line drivers are coupled to one another”). These similarities between Reiner’s display drivers 61 and 63 support Dr. Murphy’s conclusion that Reiner’s bump bridge technology for providing ESD protection could and would have been implemented in Reiner’s gate/scanning driver 63 in the same fashion as illustrated in Figure 5 for Reiner’s source/data driver module 61. We appreciate, as Dr. Schubert testifies, that the individual circuits in gate/scanning driver 63 will drive their respective gate/scan lines 68 in different ways than the individual output devices 70 in source/data driver module 61 will drive their respective source/data lines 67. See Ex. 2001 ¶¶ 55–59. Nonetheless, based on the present record, we conclude such differences in the signal outputs of Reiner’s display drivers 61 and 63 have little to do with the benefits of configuring the power inputs of the display drivers to protect the individual circuits from electrostatic discharge events, or how to do so.” slip op. at 35
- Skill levelSkill level petitioner adoptedDecided for petitioner
“to the ’157 patent “would have had at least a Bachelor’s degree in electrical engineering, computer science, physics, or a similar field and at least two years of experience designing semiconductor display devices, including LCD displays,” and “[a]dditional relevant work experience can compensate for less education, and vice versa.” Pet. 15–16; Ex. 1003 ¶¶ 75–76. “Patent Owner does not dispute the level of skill for a person of ordinary skill in the art . . . set forth in the Petition.” Prelim. Resp. 14; Ex. 2001 ¶¶ 19–20. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears to be consistent with the ’157 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 9,184,157 - Samsung Display Co., Ltd. v. Pictiva Displays Internaltional Ltd.Institution deniedPTAB · Nov 19, 2024 · IPR2024-00855 · APJ Grace Karaffa Obermann · IPR · Institution
The Board denied institution of IPR challenging claims 1–5 and 8–14, exercising § 314(a) discretion under Fintiv because the factors favored denial and the merits were not compelling.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivDenied
“We consider the following factors to assess “whether efficiency, fairness, and the merits support the exercise of authority to deny institution in view of an earlier trial date in the parallel proceeding.” 1. whether the court granted a stay or evidence exists that one may be granted if a proceeding is instituted; 2. proximity of the court’s trial date to the Board’s projected statutory deadline for a final written decision; 3. investment in the parallel proceeding by the court and the parties; 4. overlap between issues raised in the petition and in the parallel proceeding; 5. whether the petitioner and the defendant in the parallel proceeding are the same party; and 6. other circumstances that impact the Board’s exercise of discretion, including the merits. Fintiv, Paper 11 at 5–6.” slip op. at 7
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied fintivInstitution denied
“We have authority to institute an inter partes review where a petitioner shows a reasonable likelihood of prevailing with respect to at least one challenged claim. 35 U.S.C. § 314(a); 37 C.F.R. § 42.4(a). Under appropriate circumstances, however, we may exercise our discretion under Section 314(a) and deny review without regard to whether the petitioner has met that threshold. Trial Practice Guide,3 64; see 84 Fed. Reg. 64,280 (Nov. 21, 2019). For reasons that follow, we exercise our discretion under Section 314(a) and do not institute an inter partes review.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Not reached
“On this record, we discern a genuinely-disputed issue surrounding the correct construction of the first wavelength spectrum limitation. Specifically, a question arises whether the first wavelength spectrum limitation can be 13 Neither party identifies the litigation involving Petitioner’s real parties-ininterest as related to this proceeding. Pet. 1; Paper 5, 1. That litigation, however, involves assertions of the ’547 patent claims against Samsung Electronics Co., Ltd., and Samsung Electronics America, Inc. Ex. 2053, 1, 8; see Pet. 1 (identifying those entities as Petitioner’s real parties-in-interest). met by a portion of the radiation emitted by the organic layer (as argued by Petitioner); or instead, the first wavelength spectrum limitation refers to the entirety of the radiation emitted by the organic layer (as argued by Patent Owner). Compare Pet. 23–25, 57–58, with Prelim. Resp. 64–74. To be clear, we need not and, therefore, do not resolve the correct construction of the first wavelength spectrum limitation. It is enough for us to observe, on this record, that a genuinely-disputed issue surrounds this issue of claim construction. As explained in the next section, that dispute casts doubt upon whether Petitioner shows sufficiently, for purposes of trial institution, that the prior art suggests the filter transparency limitation.” slip op. at 15
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“14 Petitioner belatedly suggests that an ordinarily skilled artisan would have been prompted to replace the emitter material employed by the prior art (namely, BCzVBi in DPvBi) with a different, but undisclosed, emitter material having “no significant emission at wavelengths above 500 nm.” Opp. Supp. Br. 2 (citing Ex. 2010 ¶ 43); see Reply 3–4 (same). That argument is not presented in the Petition, much less supported in the Petition by a rationale to combine. See Pet. 16–17, 48–50 (mapping the organic layer sequence of claim 1 to the organic layer sequence of Igarashi or Shiotani, which both employ BCzVBi in DPvBi as the emitter material (Ex. 1004 ¶ 88; Ex. 1005, 5/12)).” slip op. at 17
Claim construction§ 103 obviousnessDiscretionary denialPatents in suitUS 8,314,547 - PTAB · Nov 8, 2024 · IPR2024-00834 · APJ Tawen Chang · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood of unpatentability and declining discretionary denial under §§ 325(d) and 314.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (2012) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to Patent Owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015) (discussing the burden of proof in inter partes review). The Board may authorize an inter partes review if we determine that the information presented in the Petition and Patent Owner’s Preliminary Response shows a reasonable likelihood that Petitioner will prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314(a).” slip op. at 16
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“anticipated by Sonti. Pet. 3. To show anticipation under 35 U.S.C. § 102, each and every claim element, arranged as in the claim, must be found in a single prior art reference. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359 (Fed. Cir. 2008). The prior art need not, however, use the same words as the claims to find anticipation. In re Gleave, 560 F.3d 1331, 1334 (Fed. Cir. 2009). In evaluating anticipation, it is permissible to take into account not only the literal teachings of the prior art reference, but also the inferences the skilled artisan would draw from it. Eli Lilly and Co. v. Los Angeles Biomedical Res. Inst. At Harbor-UCLA Med. Ctr., 849 F.3d 1073, 1074–75 (Fed. Cir. 2017) (holding that the “dispositive question regarding anticipation is whether one skilled in the art would reasonably understand or infer from a prior art reference that every claim element is disclosed in that reference”). As such, “a reference can anticipate a claim even if it does not expressly spell out all the limitations arranged or combined as in the claim, if a person of skill in the art, reading the reference, would at once envisage the claimed arrangement or combination.” Kennametal, Inc. v. Ingersoll Cutting Tool Co., 780 F.3d 1376, 1381 (Fed. Cir. 2015) (internal quotation and alteration marks omitted).” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“b. Reasonable Expectation of Success Petitioner asserts that an ordinarily skilled artisan would have been motivated, with a reasonable expectation of success, to topically administer 1% tapinarof composition once a day to treat mild to severe plaque psoriasis in view of Sonti’s teaching to apply its compositions (including 1% tapinarof compositions) in various application frequencies (including once daily) to treat moderate to severe plaque psoriasis. Pet. 29–30 (citing, e.g., Ex. 1003 ¶¶ 182–184, 187–188; Ex. 1005 Abstract, ¶¶ 55, 196, 288, 387).” slip op. at 32
- Obviousness (§103) › Objective indicia / secondary considerationsInstituted
“d. Objective Indicia of Non-obviousness Patent Owner asserts that, although the “Petition notes the patent’s ‘surprising[] and unexpected[]’ finding that once daily application of 1% tapinarof cream was just effective as twice daily application, . . . the Petition does not analyze, as the law requires, this surprising, unexpected finding in its obviousness arguments.” Prelim. Resp. 52. We are not persuaded by this argument. Immediately after the Petition’s acknowledgement that “[t]he specification [of the ’088 patent] contends that it was ‘surprisingly’ found that once daily application was just as effective as twice daily,” the Petition notes that, “[h]owever, during prosecution the examiner cited a set of prior art by Chen et al. disclosing treating plaque psoriasis by topically applying a composition containing 1% tapinarof once a day.” Pet. 1 (footnote omitted). Indeed, Patent Owner acknowledges that Petitioner counters “Applicant’s surprising and unexpected findings” by referring to the Chen references cited during prosecution, but asserts that “Chen . . . does not undermine Applicant’s surprising and unexpected findings” because “Chen discloses applying a composition containing 1% mixture of cis and trans 3,5-dihydroxy-4-isopropylstilbene, and not one containing 1% tapinarof (3,5-dihydroxy-4-isopropyl-trans-stilbene).” Prelim. Resp. 52–53.16 As 16 Patent Owner refers to its earlier discussion on this issue. Prelim. Resp. 53 (“As already discussed . . .”). That earlier discussion is with respect to the Chen references cited in Sonti (i.e., Exs. 1012 & 1013), not the Chen 40” slip op. at 40
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,590,088 - Fusion Orthopedics, LLC v. Extremity Medical, LLCSome claims unpatentablePTAB · Nov 4, 2024 · IPR2023-00894 · APJ Robert A Pollock · IPR · Final written decision
Claims 1–10 and 12–15 are unpatentable; claim 11 was not shown unpatentable. Substitute claims 16–25 and 27–30 are unpatentable over Mazur; claim 26 was not reached.
RulingsFinal written decision- BurdenMixed
“It is of the utmost importance that petitioners in the IPR proceedings adhere to the requirement that the initial petition identify ‘with particularity’ the ‘evidence that supports the grounds for the challenge to each claim.’” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369 (Fed. Cir. 2016) (quoting 35 U.S.C. § 312(a)(3)). Here, however, not until its Reply does Petitioner belatedly suggest that Ferrante’s disclosure of bone screws with self-tapping ends equally meets the limitation of claim 10 (with respect to the first member) as with claim 11 (with respect to the second member), and that both claims are obvious in light of “evidence” from Ferrante “that it was well known to equip bone screws with self-tapping ends.” Reply 26–27. We do not discern these arguments in the Petition, and consider them waived. See Netflix, Inc. v. DivX, LLC, 84 F.4th 1371,1377 (Fed. Cir. 2023) (“While the Board should not take an overly mechanistic view of a petition and decline to address an argument because the petitioner did not present it with ideal vigor and clarity, the Board should also not have to decode a petition to locate additional arguments beyond the ones clearly made.”). In sum, Petitioner’s error in failing to first address limitations of claim 10 in the Petition specific to the Cognet/Ferrante combination indicates a failure to meet the particularity requirements for what must be in the petition and cannot be left to be filled in on reply. See 35 U.S.C. § 312(a)(3); 37 C.F.R. §§ 42.22(a)(2) (requiring, among other things, “a detailed explanation of the significance of the evidence”), 42.104(b)(4)–(5) (requiring that petition “specify where each element of the claim is found in the prior art patents or printed publication relied upon” and, regarding submitted evidence, state “the relevance of the evidence to the challenge raised, including identifying specific portions of the evidence that support the challenge”). Microsoft, 2022 WL 989403, at *6. Accordingly, Petitioner has not shown persuasively that claim 11 would have been obvious in light of Cognet and Ferrante for the reasons set forth in the Petition. slip op. at 41
- Expert testimonyPetitioner expert creditedDecided for petitioner
“We also find persuasive Mr. Dominguez’s explanation that one of ordinary skill in the art would have understood “bore” as including stepped diameter holes, sometimes described as a bore having a counterbore. See generally Ex. 1018 ¶¶ 4–29; Reply 3–10. Three of Mr. Dominguez’s illustrative examples are reproduced in the annotated figures below. The above figures show Mr. Dominguez’s annotated illustrations from the Jackson (Ex. 1019, Fig. 3), Brånemark (Ex. 1021, Fig. 4), and Ray (Ex. 1025, Fig. 1) references as discussed at paragraphs 10, 12, and 13, respectively, of Mr. Dominguez’s Second Declaration. With reference to the above figures, Mr. Dominguez testifies that “Jackson describes a bone repair set screw in which ‘[t]he bore 27 comprises a first bore section 31, a second bore section 32,’ etc. delineated by shoulders 41, 42, etc. (Ex. 1019, 5:24– 43)” (Ex. 1018 ¶ 10); “Brånemark describes an osseous implantation device having body 1ʺ with first and second holding portions 21ʺ, 31ʺ and ‘an inner through bore with a first portion 4ʺ in the first holding portion and a second portion 5ʺ in the second holding portion.’” Ex. 1021, 4:44–46” (id. ¶ 12); and Ray discloses surgical calipers including “handle 12 having ‘stepped cylindrical bore 14,’” wherein “[c]ollar 20 of a shaft inserted in the bore ‘rests against a step of the bore 14’ (2:14–15)” (id. ¶ 13). Patent Owner responds that Mr. Dominguez’s examples “that allegedly show a single bore encompassing two or more stepped-diameter holes or a counterbore . . . . are specific to these references and divorced from the disclosures of the ’166 patent.” Sur-Reply 7. Insofar as the ’166 patent makes no mention of the term “bore” outside the claims, and Mr. Dominguez’s examples are all taken from the field of orthopedic surgery, we do not find this argument persuasive. Patent Owner further appears to contend that exemplary references to a “cylindrical stepped down bore” or a “stepped cylindrical bore” are too specific to be within the scope of the term “bore.” Sur-Reply 7–8. As these terms merely describe species within a larger genus, and Patent Owner presents no cogent reason to exclude them, we do not find this argument availing. Relatedly, we are also not persuaded by Patent Owner’s argument that “the prior art treats a ‘bore’ as an element that is distinct from a ‘counterbore.’” Id. at 8. Rather, we credit Mr. Dominguez’s testimony that “[a] counterbore is not a structure unto itself, a counterbore is part of a larger structure” as exemplified by numerous examples including Laps (Ex. 1028 ¶ 33 (sensor assembly wherein “bore 16 includes a counterbore 18”)); Martinez (Ex. 1029, 3:61 (surgical cutting instrument wherein “bore 56 has a counterbore 64”)); Zang (Ex. 1030, 2:49 (bone anchor having a “bore [that] includes a counterbore”)); Ledet (Ex. 1022, 29:3–5 (vertebral fixation plate having “through holes . . . . countersunk, or counterbored to accommodate the head of a bone screw”)); Seo (Ex. 1031, 3:45 (chair leg employing “counterbored bore 23”)); and Exner (Ex. 1032, 2:16 (extrusion press including “counterbored axial bore 6”)). Ex. 1018 ¶¶ 17–23. That a reference may refer to a figure as showing “bore 103” with “counterbore 105 . . . formed on one end” does not indicate that they are distinct structures as Patent Owner contends, but merely that the focus of each term is directed to the entire bore or to a particular aspect of the bore, i.e., its counterbore. See” slip op. at 22
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner subsequently proposed an alternative definition, as a person having “[a] Bachelor’s Degree in biomedical and/or mechanical engineering or similar training and . . . at least three years of experience with implant devices used for internal fixation of bones.” POR 5 (citing Ex. 2012 ¶¶ 32–33). According to Patent Owner, “[t]his hypothetical person would be capable of performing various design tasks and would understand the basic mechanical features and operation of orthopaedic implant devices [and] have an appreciation for orthopaedic fusion techniques and the medical issues and concerns faced by a doctor/surgeon charged when performing operations to implant orthopaedic devices.” Id. Despite some differences in wording, Patent Owner asserts (and Petitioner does not contest) that any “distinction between the parties’ proposed definitions of a POSITA does not affect the arguments set forth herein.” Id. (citing Ex. 2012 ¶ 34). Consistent with this view, we find the parties’ constructions equally applicable in light of the prior art of record and the disclosure of the ’166 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). We adopt, for convenience, Petitioner’s definition, but our analysis does not change depending on which of the two articulations are applied here. H.” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“one of ordinary skill in the art would understand that “bore,” as used in the context of claims 1 and 12, encompasses a multi-diameter passage, and in particular, one having stepped longitudinal cross sections such as that shown in Cognet’s Figure 1. See generally DI 11–13. For the reasons that follow, we conclude that one of ordinary skill in the art would have understood “bore” as such. Relying on the testimony of Mr. Dominguez, Petitioner initially proposed a construction of “bore” as “a usually cylindrical hole made by or as if by the turning or twisting movement of a tool.” Pet. 16 (citing Ex. 1002 ¶ 58). Petitioner’s proposal relied on Mr. Dominguez’s testimony that “[a] bore is a cylindrical hole made by the spinning rotation of a twist drill cutting tool. It is typically made by removing material from a solid or hollow object, similar to a tunnel or orifice.” Ex. 1002 ¶ 58. Pointing to its annotation of Cognet’s Figure 1, above, Patent Owner argued that that the term “bore” excludes a tunnel made by “two adjacent bores.” See Prelim. Resp. 21–25. In view of the then-available evidence, we provisionally construed “bore” as a hole or passage made by or as if by the turning or twisting movement of a tool such that its interior walls have cylindrical lateral cross-sections, and which do not exclude holes or passages having tapered or stepped longitudinal cross-sections. DI 13.” slip op. at 19
Patent outcomesUS 11,298,166 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,298,166
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.