- PTAB · Oct 6, 2025 · IPR2025-00438 · APJ Lilan Ren · IPR · Institution
The Board instituted IPR on claims 1–5, 7–13, and 16–20 and all asserted grounds after finding a reasonable likelihood of prevailing on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314 (2024); 37 C.F.R. § 42.4(a) (2024). Institution of an inter partes review requires that “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, we determine that there is a reasonable likelihood that Petitioner will prevail with respect to at least one challenged claim, and we institute an inter partes review.1” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner contends that an ordinarily skilled artisan “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 11–12. For purposes of this decision, we adopt Petitioner’s definition of the level of ordinary skill in the art as it appears unopposed and consistent with the disclosures of the ’466 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). C. Claim Construction” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“standard as would be used by a district court to construe a claim in a civil action involving the validity or infringement of a patent. 37 C.F.R. § 42.100(b). Under that standard, claim terms are given their ordinary and customary meaning, as would have been understood by a person of ordinary skill in the art at the time of the invention, in light of the language of the claims, the specification, and the prosecution history of record. Id.; Phillips v. AWH Corp., 415 F.3d 1303, 1312–19 (Fed. Cir. 2005) (en banc); Thorner v. Sony Comput. Entm’t Am. LLC, 669 F.3d 1362, 1365–66 (Fed. Cir. 2012). “The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (quoting Vivid Techs., Inc. v. Am. Sci. Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). At this stage of the proceeding, neither party contends that any formal claim construction is necessary. See Pet. 6 (“Petitioner submits that no claim terms require a formal construction for purposes of evaluating the prior art and resolving issues this proceeding.”); Prelim. Resp. 12 (“For the purposes of this Preliminary Response, Patent Owner submits that the Board does not need to construe any claim terms in any particular way to conclude that the Petition is deficient and thus institution of review is not warranted.”). After reviewing the parties’ respective arguments and the evidence currently before us, however, we determine that we do not need to expressly construe any claim term to resolve any controversy at this stage of the proceeding. D. Alleged Obviousness Over Loughran and Dubois (Ground 1A)” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“The record before us supports Petitioner’s contention that the combining Loughran and Dubois is no more than a “combination of familiar elements according to known methods . . . [which] does no more than yield predictable results.” Compare Pet. 12, with Prelim. Resp. 19–23 (disputing some of Petitioner’s reasons to combine without addressing Petitioner’s reasoning based on KSR); see KSR, 550 U.S. at 416. By contrast, Patent Owner’s contentions relating to the alleged motivation to combine teachings of Loughran and Dubois lack evidentiary support. Based on our review and consideration of the current record, we are persuaded that Petitioner has adequately shown for purposes of institution that there is sufficient rationale to combine as well as a reasonable expectation of success in combining the teachings of Loughran and Dubois in the manner suggested.” slip op. at 17
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,569,466 - PTAB · Oct 6, 2025 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Institution
The Board instituted IPR of claims 1–10, 12, 13, 19, and 20 on all petition grounds after finding a reasonable likelihood that claim 1 was obvious over Douglas and Mark.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“A claim is unpatentable under § 103 “if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains.” 35 U.S.C. § 103; see KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). When a ground in a petition is based on a combination of references, we consider “whether there was an apparent reason to combine the known elements in the fashion claimed by the patent at issue.” KSR, 550 U.S. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)).” slip op. at 8
- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3 (citing Ex. 1003 ¶¶ 19–21); Prelim. Resp. 9. The parties’ proposed levels of ordinary skill are substantially similar. Although we discern no difference in the outcome of this decision from choosing one over the other, we adopt Petitioner’s proposal for this decision. Only Petitioner’s proposed level is supported by testimonial evidence on the preliminary record, and it appears to be consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Therefore, we adopt Petitioner’s proposal for this decision.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“CLAIM CONSTRUCTION B. In an IPR, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). This generally includes “construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id. The ordinary and customary meaning of a claim term “is its meaning to the ordinary artisan after reading the entire patent,” and “as of the effective filing date of the patent application.” Phillips, 415 F.3d at 1313, 1321. Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; Prelim. Resp. 9. However, the parties’ positions depend on interpreting the claim language in a particular way, and we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“At this stage, we find Petitioner’s arguments persuasive and disagree with Patent Owner. Patent Owner appears to equate a “fabrication profile” with a toolpath description, but nothing in the plain language of claim 1 supports that narrow interpretation. The ’774 patent describes a “fabrication profile” broadly and states that the profile can simply “include the dictionary [of configuration information],” or be “used to determine which machineready representation is available or suitable for a target printer.” Ex. 1001, 23:49–52. The preliminary evidence suggests that Douglas’s “operational parameters” would count as a “fabrication profile” because it is “the basis for generation of a machine-ready representation of the three-dimensional model that is executable on the target printer.” Id. at 23:37–39; see infra Section III.C.8. We also disagree that Petitioner’s argument is impermissible hindsight, because it is based on the disclosures in Douglas and Mark, and Petitioner has articulated a sufficiently persuasive reason to combine those references without referring to the ’774 patent itself. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”). Finally, Petitioner appears to rely on Mark for providing a particular example of a fabrication profile, not to replace Douglas’s overall system in which the 3D printer can receive “operational parameters” rather than just G-code. See Pet. 8–10, 17–23; see also Ex. 1005 ¶ 41 (the print queue, which stores tool instructions, may be maintained locally on printers 204 or on print servers 208); see In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“[A] determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.” (citing In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc))).” slip op. at 19
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - Shenzhen Tuozhu Technology Co. Ltd. v. Stratasys, Inc.Institution deniedPTAB · Oct 6, 2025 · IPR2025-00585 · APJ Lilan Ren · IPR · Institution
The Board denied institution on claims 1–6, 10–19 because claim 1’s scope is ambiguous and the petition did not show a reasonable likelihood of prevailing on any asserted obviousness ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. See 35 U.S.C. § 314 (2024); 37 C.F.R. § 42.4(a) (2024). Institution of an inter partes review requires that “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, we determine that the scope of claim 1 is ambiguous and that there is not a reasonable likelihood that Petitioner will prevail with respect to at least one challenged claim, and we deny inter partes review.1” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“distinguishes and contrasts build material property from operational parameters. The diagnostic test passage therefore only describes a diagnostic test of the build material property but does not describe a subsequent diagnostic test to assess whether an operational parameter is suitable for the printer. Based solely on the diagnostic test passage and the prosecution history, a possible interpretation may be that the operational parameter determination in claim element 1b encompasses the diagnostic testing in claim element 1c. That is, “performing a diagnostic test to determine whether the operational parameter is suitable for the three-dimensional printer” in claim element 1c is subsumed as part of “determining an operational parameter of a fabrication process using the three-dimensional printer based upon the data, the operational parameter including at least one of a build platform temperature, a build volume temperature, an infill requirement, a rafting requirement, a support structure requirement, and a cooling requirement” in claim element 1b.” slip op. at 15
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateOther
“benefit of the filing date of an earlier filed application only if the disclosure of the earlier application provides support for the claims of the later application, as required by 35 U.S.C. § 112.” PowerOasis, Inc. v. T-Mobile USA, Inc., 522 F.3d 1299, 1306 (Fed. Cir. 2008); see also Research Corps. Techs. v. Microsoft Corp., 627 F.3d 859, 871–72 (Fed. Cir. 2010) (holding that claims of the later-filed application, which were not limited to a “blue noise mask,” were “not entitled to claim the benefit of their parent applications’ filing dates”); ICU Med., Inc. v. Alaris Med. Sys., 558 F.3d 1368, 1377–78 (Fed. Cir. 2009) (holding that “spikeless” claims “added years later during prosecution” were not supported by the specification which “describe[d] only medical valves with spikes”); Tronzo v. Biomet, Inc., 156 F.3d 1154, 1158–60 (Fed. Cir. 1998) (holding the generic shaped cup claims of the later-filed child application were not entitled to the filing date of the parent application that “disclosed only a trapezoidal cup and nothing more”). “To satisfy the written description requirement the disclosure of the prior application must convey with reasonable clarity to those skilled in the art that, as of the filing date sought, [the inventor] was in possession of the invention.” PowerOasis, 522 F.3d at 1306 (emphasis omitted; alteration in original). The sufficiency of written description support is based on “an objective inquiry into the four corners of the specification from the perspective of a person of ordinary skill in the art.” Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc).” slip op. at 20
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art in the field in the relevant time frame would have had “(1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶ 20). Petitioner also contends that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. (citing the same). Patent Owner contends that an ordinarily skilled artisan “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 12. For purposes of this decision, we adopt Petitioner’s definition of the level of ordinary skill in the art as it appears unopposed and consistent with the disclosures of the ’464 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9
Claim construction§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 11,167,464 - PTAB · Oct 3, 2025 · IPR2025-00758 · APJ Kara L Szpondowski · IPR · Institution
The Board instituted IPR on claims 1–14 and all asserted grounds, finding a reasonable likelihood that claim 1 is unpatentable over Murphy and over Petrik.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on the current record, and for the reasons explained below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one challenged claim, and we institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends a person of ordinary skill in the art “would have at least a bachelor’s degree in electrical engineering, computer engineering, computer science, or similar disciplines, and at least two years of professional experience in the automotive industry with research, design, and/or development of automotive electrical and control systems, or an equivalent level of skill knowledge, and experience.” Pet. 7–8 (citing Ex. 1004 ¶ 23). In addition, “[t]he more education one has, the less experience needed to attain an ordinary level of skill,” and “more experience in the field may serve as a substitute for formal education.” Id. at 8. At this stage of the proceeding, Patent Owner does not dispute Petitioner’s proposed definition. Paper 6, 4. Based on the current record, we adopt Petitioner’s proposed level of ordinary skill in the art for purposes of this Decision, as it is consistent with the level of ordinary skill in the art reflected by the prior art of record.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner proposes that all terms be given their plain and ordinary meaning. Pet. 7. Patent Owner “does not believe any terms need to be construed at this time.” Paper 6, 4. Because there is no dispute between the parties, and after reviewing the record, we determine that no express claim construction is necessary for purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (alteration in original)).” slip op. at 10
Claim constructioncites GrahamPatents in suitUS 9,908,508 - PTAB · Sep 15, 2025 · IPR2025-00632 · APJ Mitchell G Weatherly · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood that claims 1, 2, 7–9, 11, 12, and 20–24 are obvious over Yamaguchi-727.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Cerebrum Sensor Technologies, Inc. (“Patent Owner”) timely filed a Preliminary Response. Paper 9 (“Prelim. Resp.”).1 Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record, we conclude that Petitioner is reasonably likely to prevail with respect to at least one of the challenged claims.” slip op. at 2
- BurdenInstituted
“We disagree. Positioning module 6 to face a “predetermined direction” is a form of preventing movement that falls within the scope of limitation 1b. Moreover, Yamaguchi-727 uses a method for preventing movement of its module 6 in its housing 20, silicone potting material, that is expressly recognized by the Specification of the ’421 patent when it states: “A common technique used to assist in fixturing the electrical sensor device 40 known within the automotive industry is to fill the internal cavity with a coating material such as a neutral silicone or the like for purposes of retaining placement position.” Ex. 1001, 13:56–60. Although the Specification also asserts that the sensor assemblies disclosed in the 421 patent “do not use or require the use of any such coating or filing agents or materials for any fixturing of the electrical sensor device 40,” id. at 13:61–64, limitation 1b merely requires that the “sensor device . . . is disposed within the internal cavity and attached therein to prevent movement of the device within the internal cavity,” id. at 30:25–27. Absent a persuasive argument to the contrary, we preliminarily conclude that Yamaguchi-727’s use of potting material to hold its module 6 in place within its housing 20 meets the requirements of limitation 1b. Both parties are encouraged to adduce intrinsic evidence relating to the meaning of limitation 1b at trial. For all the reasons set forth above, we find that Petitioner has established a reasonable likelihood of proving the Yamaguchi-727 renders claim 1 unpatentable as obvious. 2. Dependent Claims 2, 7–9, 11, 12, and 20–24 Petitioner identifies the portions of Yamaguchi-727 that teach the limitations introduced in dependent claims 2, 7–9, 11, 12, and 20–24, all of which ultimately depend from claim 1. Pet. 32–40. Patent Owner relies upon its argument that Petitioner’s showing for claim 1 is deficient as the reason why Petitioner’s challenge to dependent claims 2, 7–9, 11, 12, and 20–24 fails. We reject this argument for the reasons stated in Part II.C.1 above. Based on our review of Petitioner’s otherwise uncontested argument and evidence cited in support, we find that Petitioner also establishes a reasonable likelihood of proving that Yamaguchi-727 renders dependent claims 2, 7–9, 11, 12, and 20–24 unpatentable as obvious. D. Remaining Challenges” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Petitioner complies with the requirement of identifying “[h]ow the claim language is to be construed” by setting forth proposed interpretations of various claim terms in the table above.7 Both cases cited by Patent Owner relate to an issue presented by a petitioner’s alleged inconsistent handling of whether a claim term is subject to interpretation as a means-plus-function element under 35 U.S.C. § 112(f). Orthopediatrics Corp. v. K2M, Inc., IPR2018-01546, Paper 10 at 11 (PTAB Feb. 14, 2019); 10x Genomics, Inc. v. President and Fellows of Harvard College, IPR2023- 7 Neither party has identified any claim language that might invoke interpretation as a means-plus-function limitation, and we discern no such claim language. Additionally, we do not imply that a petitioner must always propose express interpretations for specific claim language to comply with Rule 42.104(b)(3). Rather, we only note that Petitioner has, by any measure, complied by expressly proposing interpretations for identified claim language.” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“We disagree. Positioning module 6 to face a “predetermined direction” is a form of preventing movement that falls within the scope of limitation 1b. Moreover, Yamaguchi-727 uses a method for preventing movement of its module 6 in its housing 20, silicone potting material, that is expressly recognized by the Specification of the ’421 patent when it states: “A common technique used to assist in fixturing the electrical sensor device 40 known within the automotive industry is to fill the internal cavity with a coating material such as a neutral silicone or the like for purposes of retaining placement position.” Ex. 1001, 13:56–60. Although the Specification also asserts that the sensor assemblies disclosed in the 421 patent “do not use or require the use of any such coating or filing agents or materials for any fixturing of the electrical sensor device 40,” id. at 13:61–64, limitation 1b merely requires that the “sensor device . . . is disposed within the internal cavity and attached therein to prevent movement of the device within the internal cavity,” id. at 30:25–27. Absent a persuasive argument to the contrary, we preliminarily conclude that Yamaguchi-727’s use of potting material to hold its module 6 in place within its housing 20 meets the requirements of limitation 1b. Both parties are encouraged to adduce intrinsic evidence relating to the meaning of limitation 1b at trial. For all the reasons set forth above, we find that Petitioner has established a reasonable likelihood of proving the Yamaguchi-727 renders claim 1 unpatentable as obvious. 2. Dependent Claims 2, 7–9, 11, 12, and 20–24 Petitioner identifies the portions of Yamaguchi-727 that teach the limitations introduced in dependent claims 2, 7–9, 11, 12, and 20–24, all of which ultimately depend from claim 1. Pet. 32–40. Patent Owner relies upon its argument that Petitioner’s showing for claim 1 is deficient as the reason why Petitioner’s challenge to dependent claims 2, 7–9, 11, 12, and 20–24 fails. We reject this argument for the reasons stated in Part II.C.1 above. Based on our review of Petitioner’s otherwise uncontested argument and evidence cited in support, we find that Petitioner also establishes a reasonable likelihood of proving that Yamaguchi-727 renders dependent claims 2, 7–9, 11, 12, and 20–24 unpatentable as obvious. D. Remaining Challenges” slip op. at 11
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,835,421 - Champion Laboratories, Inc. / First Brands Group, LLC v. Hengst SENo claims unpatentablePTAB · Sep 8, 2025 · IPR2024-00603 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1, 3, 5, 8–11, 15–17, 19, 23–25, and 28–30 were not shown unpatentable over Yokoyama, Yokoyama and Cline, or Honermann and Cline.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Because the level of ordinary skill in the art is not in dispute, and because the parties’ definition is consistent with the disclosures in the ʼ203 patent, the prior art, and the declaration testimony of Mr. Nranian and Dr. Basirat, we view the prior art and arguments through this lens when determining whether the claims are unpatentable as obvious over the prior art.5 See Graham, 383 U.S. at 17 (identifying “the level of ordinary skill in the pertinent art” as an underlying factual inquiry to be resolved in deciding obviousness, which is a question of law).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Although the parties spend significant portions of their briefing discussing the term “eccentric” and how it applies to certain figures from the ʼ203 patent and the relied-upon prior art, we determine that it is not necessary to expressly construe the term “eccentric” beyond the parties’ agreed-upon definition. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Expert testimonyPetitioner expert discountedDecided for patent owner
“(opining that “Patent Owner’s construction of ‘having an axis no located in a geometric center’ is too narrow”). Mr. Nranian’s Declaration testimony in this respect is not persuasive for several reasons. First, it is internally inconsistent. Compare Ex. 1016 ¶ 3 (criticizing the “axis” language in Patent Owner’s definition), with id. ¶¶ 9, 11 (relying on that very language to support an argument). Also, Mr. Nranian’s proposed definition of “eccentric” to merely mean “not located at the center” begs the question of what, precisely, is “the center”? Mr. Nranian does not persuasively explain how far a person of ordinary skill in the art would understand she could travel from the exact center point of an object and still be in “the center” of that object. See Tr. 10:13–19 (Judge McGee asking whether the center is “a miniscule point in the middle of [the] disc”); see also id. at 10:25–12:26 (Judge Weatherly highlighting the significant ambiguity in referring to something as in “the center”). Also, Mr. Nranian’s opinion is inconsistent with how the ʼ203 patent compares something that is “central,” i.e., “at the center,” and something that is “eccentrically” located. Ex. 1001, 7:13–14 (describing pipe nozzle 15 as “central”); id. at 8:53–56 (describing a “through hole” as “located in the center of the front panel 22” depicted in Figures 7 and 8); id. at 10:23–31 (describing return 12 as “in the center” and outlet 13 as “eccentrically thereto” in Figure 17). Patent Owner’s colorized and annotated Figure 7 is reproduced below: Patent Owner’s colorized and annotated version of Figure 7 of the ʼ203 patent illustrates “central pipe nozzle 15” in yellow passing through the “through hole” located in “the center” of front panel 22. PO Resp. 20. Significantly, pipe nozzle 15 and the through hole in panel 22 are both described as “central” and in “the center” but must have different diameters; otherwise, “central pipe nozzle 15” would not be capable of traveling through “through hole 22.” Ex. 1001, Fig. 7. Thus, the ʼ203 patent intrinsically bases whether an element is “central” or “in the center” on whether its axis is located at the geometric center. This is also illustrated in Figure 17 of the ʼ203 patent, reproduced below: Figure 17 of the ʼ203 patent illustrates filter housing 10 with return 12 “in the center . . . and, eccentrically thereto, the outlet 13 with the seat 14 for the blocking element 24.” Ex. 1001, 10:23–30. Finally, Mr. Nranian’s narrow interpretation of “eccentric”––which excludes the “having the axis or support so located” in the geometric center language––is at odds with the arguments it was proffered to support. Cf. Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”).” slip op. at 29
Patent outcomesUS 9,023,203 not shown unpatentableClaim construction§ 103 obviousnesscites GrahamPatents in suitUS 9,023,203 - PTAB · Aug 26, 2025 · IPR2025-00437 · APJ Mitchell G Weatherly · IPR · Institution
The Board instituted IPR of claims 1–19 on all grounds, finding a reasonable likelihood that Wang anticipates claim 1.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Owner”) did not file a Preliminary Response on the merits of patentability. Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record,1 we conclude that Petitioner is reasonably likely to prevail with respect to at least one of the challenged claims.” slip op. at 2
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“A claim is anticipated only if each and every element as set forth in the claim is found, either expressly or inherently described, in a single prior art reference.” Verdegaal Bros., Inc. v. Union Oil Co. of Cal., 814 F.2d 628, 631 (Fed. Cir. 1987). slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“35 U.S.C. § 282(b), including construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). When applying that standard, we interpret the claim language as it would have been understood by one of ordinary skill in the art in light of the specification. Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1279–80 (Fed. Cir. 2017). Thus, we give claim terms their ordinary and customary meaning as understood by an ordinarily skilled artisan. See Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). Only terms that are in controversy need to be construed, and then only to the extent necessary to resolve the controversy. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017). Petitioner contends that “no special constructions are required.” Pet. 10. We agree and do not expressly construe any claim term.” slip op. at 4
Claim construction§ 102 anticipationcites PhillipsPatents in suitUS 10,788,690 - Cambridge Industries USA, Inc. v. Applied Optoelectronics, Inc.Institution deniedPTAB · Aug 26, 2025 · IPR2025-00436 · APJ Mitchell G Weatherly · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that Mizobuchi or Akashi anticipates any of claims 1–17.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record, we conclude that Petitioner is reasonably likely to prevail with respect to at least one challenged claim.” slip op. at 2
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“All independent claims recite “a light engine driving circuit disposed on the substrate.” Ex. 1001, 9:59 (claim 1), 10:64 (claim 12), 12:7 (claim 15). Petitioner contends that “Mizobuchi discloses a light engine driving circuit disposed on the substrate that includes a clock data recovery (“CDR”) circuit and a power supply circuit.” See Pet. 19 (citing Ex. 1006, 3:57–4:18, 12:27–41, Figs. 2, 3A; Ex. 1003 ¶ 76 while addressing limitation 1d); see also id. at 26–28 (addressing claims 12 and 15 by cross-referencing showing for claim 1). Petitioner identifies the driving circuit on Mizobuchi’s “first circuit board” 2 in the annotated version of Mizobuchi’s Figure 2, reproduced below. See Pet. 19.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that the Board may find it necessary to interpret “feedthrough device,” “interconnect device,” and “opposing arrangement.” Pet. 8–11. Patent Owner responds to Petitioner’s proposed interpretations of these terms, but contends that the Board need not interpret them to determine whether to institute review. Prelim. Resp. 17–18. For reasons that become apparent below, we agree with Patent Owner and do not expressly construe these terms. B. Legal Standards” slip op. at 4
Claim construction§ 102 anticipationcites PhillipsPatents in suitUS 10,313,024 - PTAB · Aug 25, 2025 · IPR2025-00631 · APJ Kevin W Cherry · IPR · Institution
The Board instituted IPR on claims 1–3, 5, 7–9, 11–13, and 15–22 on all five asserted § 103 grounds, finding a reasonable likelihood of success on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute an inter partes review. The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The Supreme Court has held that the Board, in a decision to institute under 35 U.S.C. § 314(b), may not institute review on less than all claims challenged in the petition. SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1355–56 (2018). Moreover, in accordance with our rules, “[w]hen instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2020); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”). Applying those standards, and upon considering the Petition, the Preliminary Response, and the evidence of record, we determine the information presented shows a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’027 patent. Accordingly, we institute an inter partes review of all challenged claims (i.e., 1–3, 5, 7–9, 11–13, and 15–22) of the ’027 patent, based on the grounds asserted in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have “possessed an undergraduate degree in chemistry, polymers, materials science, chemical engineering (or related field) and one to two years of experience with constructing and manufacturing tires, tire patches, tire decals/stickers and/or the like.” Pet. 8 (citing Ex. 1003 ¶¶ 6–11). According to Petitioner, “Additional education could compensate for less practical experience. Conversely, additional practical experience could compensate for less education.” Id. Patent Owner does not provide an alternate definition, but, “Patent Owner does not acquiesce to, and reserves the right to address, [Petitioner’s] definition of a POSA.” Prelim. Resp. 6 n.6. Petitioner’s proposed definition appears to be consistent with the disclosure of the ’027 patent, and we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that the prior art itself may “reflect[] an appropriate level” of ordinary skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Having considered the record, we determine that no express claim construction is necessary for any claim terms. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“We disagree with Patent Owner’s contentions that these disclosures indicate that Wilson’s patch would not meet the construction of “barrier material composition.” None of these disclosures even suggests that the base of Wilson’s patch is rigid as Patent Owner suggests. To begin with, the fact that the housing is “more rigid” provides no information about the absolute rigidness of the patch. See Ex. 1009, 9:16–21. As for the disclosure that the patch is contoured (id. at 3:35–67), Patent Owner provides only attorney argument to support its contention that the contour demonstrates that Wilson’s patch must be so rigid that it cannot be meet the claim limitation. In contrast, Petitioner demonstrates that Wilson discloses using the exact same materials described in the challenged patent (see Ex. 1001, 6:33–58 (noting “[e]lastomeric materials useful for forming the intermediate layer 24 include but are not limited to gum rubber, vulcanized natural rubber SBR . . . or comparable materials”); Ex. 1009, 3:49–55 (noting the patch may be constructed from natural rubber (NR), a preferred mixture of chlorobutyl rubber and natural rubber (CR/NR), or a preferred mixture of SBR and natural rubber (SBR/NR)), and provides detailed testimony from its expert to support its contentions (see Ex. 1003 ¶¶ 114–119). On the current record, we find Petitioner’s reasoning and evidence to be persuasive, and find that Petitioner has shown sufficiently that Willson discloses or teaches this limitation.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,124,027 - Microchip Technology Inc. v. Aptiv Technologies AGAll claims unpatentablePTAB · Jul 30, 2025 · IPR2024-00230 · APJ John D Hamann · IPR · Final written decision
Claim 1 is unpatentable as obvious over Chang and Chang II; the Board did not reach the Chang, Chang II, and Chutorash ground.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“We agree with Patent Owner and find that “computer network protocols” is correct in light of the ’072 patent’s disclosure and claim 1. In particular, the ’072 patent teaches that it “generally relates to [USB] connectivity between, for example, mobile consumer devices and vehicle electronic systems.” Ex. 1009, 1:21–23. And the ’072 patent’s teachings focus on common network components (e.g., hub, bridge, ports) and common networking concepts (e.g., master/slave network architecture and bridging) which are used in the USB context, rather than detailed aspects (e.g., signal timing, signal levels, power levels) of the USB protocol. See generally Ex. 1009; see also Ex. 1084, 103:21–104:2, 104:24–105:4; Pet. Reply 4 (citing Ex. 1084,7 100:17–101:12 (acknowledging that Dr. Houh testifies that one of ordinary skill in the art “would know basic USB concepts like bridging, master/slave architecture, etc.”), 102:3–8, 103:21– 104:2, 104:24–105:4). Likewise, claim 1 repeatedly recites “USB,” but does so to identify that all of the components of the data system (i.e., USB ports, USB hub, USB bridge, USB host, USB multiplexing switches) employ the USB protocol. Ex. 1009, 9:15–10:18. As the ’072 patent teaches, “USB 7 Houh Deposition Tr. (2024/12/18, Day 1). technology . . . [wa]s commonly available, familiar to the end user, cost effective and ubiquitous.” Id. at 1:35–37. Thus, although the ’072 patent is taught in the USB context, “computer network protocols” concepts are the focus. For these same reasons, we find unavailing Petitioner’s argument that one of ordinary skill in the art “would have been well-versed in USB standards (including the USB 2.0 and 3.0 Specifications and the OTG Supplement) and the design/deployment of USB hosts, USB devices, and USB hubs, including suitable environments for USB systems.” Pet. 26.” slip op. at 11
- Expert testimonyPetitioner expert discountedOther
“Lastly, we give little weight to Mr. Welch’s testimony regarding the level of one of ordinary skill as he does not indicate what precisely constitutes the basis of his testimony on this issue. See Ex. 1013 ¶ 47.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Here, Petitioner argues that “embedded USB host” means “USB host physically embedded in a vehicle.” See Pet. 27–28. “Patent Owner does not contend that any claim construction is required.” PO Resp. 5. We agree with Patent Owner that we do not need to construe any term to resolve the disputes between the parties. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’”). And we afford the claim terms their plain and ordinary meaning.” slip op. at 13
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“that the asserted objective evidence is tied to a specific product that ‘embodies the claimed features, and is coextensive with them.’” Id. (quoting Brown & Williamson Tobacco Corp. v. Philip Morris, Inc., 229 F.3d 1120, 1130 (Fed. Cir. 2000)). In other words, “[a] presumption of nexus requires both that the product embodies the invention and is coextensive with it.” Id. at 1211 (citing Brown, 229 F.3d at 1130). Patent Owner fails to show either of these requirements. First, Patent Owner argues that in his Supplemental Declaration, Dr. Houh “provides on a per limitation basis how [Patent Owner]’s dual role hub meets all limitations of claim 1.” PO Resp. 73 (citing Ex. 2019 ¶ 136). Notably, Patent Owner cites to a single paragraph in this declaration, without providing any specific arguments in its Response that its product practices claim 1. Id. Rather, Patent Owner incorporates its arguments by reference, which is not permitted. See 37 C.F.R. § 42.6(a)(3) (“Arguments must not be incorporated by reference from one document into another document.”). Thus, we do not consider these arguments, and we are not persuaded that Patent Owner’s product practices claim 1. Consolidated Trial Practice Guide November 2019,8 35–36 (citing Cisco Systems, Inc. v. C-Cation Techs., LLC, IPR2014-00454, Paper 12 (PTAB Aug. 29, 2014) (informative)) (“[P]arties that incorporate expert testimony by reference in their petitions . . . without providing explanation of such testimony risk having the testimony not considered by the Board.”).” slip op. at 16
Patent outcomesUS 11,176,072 unpatentableClaim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,176,072
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.