- PTAB · Jul 26, 2024 · IPR2024-00373 · APJ Jon M Jurgovan · IPR · Institution
The Board instituted IPR on claims 1–17 on all asserted grounds, finding a reasonable likelihood of unpatentability under § 103.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in a petition and the preliminary response “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Upon consideration of the Petition and Preliminary Response, and accompanying exhibits and evidence, we determine Petitioner has established a reasonable likelihood that it would prevail with respect to at least one challenged claim in the inter partes review. Therefore, we grant institution of an inter partes review as to all of the challenged claims of the ’249 patent on all challenges in the Petition.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › General Plastic (serial petitions)Decided for petitioner
“deny institution under § 314(a) based on the factors set forth in General Plastic Industrial Co. v. Canon Kabushiki Kaisha, IPR2016-01357, Paper 19 at 15–19 (§ II.B.4.i) (PTAB Sept. 6, 2017) (precedential) (“General Plastic”). Pet. 88–89; Prelim. Resp. 59–60. General Plastic addresses “[m]ultiple, staggered petitions challenging the same patent and same claims rais[ing] the potential for abuse.” General Plastic, Paper 19 at 17 (emphasis added). The parties point to no authority to support that General Plastic has ever been applied in the context of a reexamination filed before a petition similar to the facts of this case. We decline to consider further discretionary denial under General Plastic under the facts presented here.” slip op. at 9
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“In evaluating discretionary denial under § 325(d), the Board follows a two-part framework: (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of the first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. Advanced Bionics, LLC v. MED-EL Elektromedizinische Geräte GmbH, IPR2019-01469, Paper 6 at 8 (PTAB Feb. 13, 2020) (precedential) (“Advanced Bionics”). The Advanced Bionics framework is further informed by the factors set forth in Becton, Dickinson” slip op. at 10
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends as follows: A POSITA would have had a Bachelor’s degree in electrical engineering, computer engineering, or a related field, and 2–3 years of experience in design or development of signal processing and communication systems or networks. . . . Additional education could substitute for professional experience, or vice-versa. Pet. 6 (citing Ex. 1002 ¶¶ 17–18). At this stage of the proceeding, Patent Owner does not dispute Petitioner’s proposed level of skill in the art, which is consistent with the prior art references asserted by Petitioner. Okajima v. Bourdeau, 261 F.3d 1350, 1354–55 (Fed. Cir. 2001) (the applied prior art may reflect an appropriate level of skill). Accordingly, we agree with and will use Petitioner’s proposed level for purposes of this Decision.” slip op. at 16
Claim construction§ 103 obviousnessDiscretionary denialcites KSRPatents in suitUS 7,594,249 - PTAB · Jul 25, 2024 · IPR2024-00478 · APJ Patrick R Scanlon · IPR · Institution
The Board instituted IPR of claims 1–19 on all asserted grounds, finding a reasonable likelihood of success on anticipation by Rosenberg-I.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, we determine that Petitioner has demonstrated a reasonable likelihood that it would prevail with respect to at least one challenged claim. Accordingly, we institute an inter partes review of the challenged claims on the grounds set forth in the Petition.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“In view of the above, we determine that this factor strongly weighs against the exercise of discretionary denial. 2. Factor 2: proximity of the court’s trial date to the Board’s projected” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8
- Skill levelOther
“would have a bachelor’s degree in electrical engineering, computer science, or a related field, plus at least two years of industry or graduate level experience with software engineering, haptics programming, and/or human-computer interaction, including experience with user-interfaces and applications involving touchscreens, touchpads, and related technologies.” Pet. 8 (citing Ex. 1003 ¶¶ 37–43). Patent Owner contends that a person having ordinary skill in the art “would have had a bachelor’s degree in electrical engineering or computer science (or an equivalent degree), and two years of practical or industry experience in the field of human computer interaction (HCI), including implementation of computer-based systems and software for providing haptic feedback effects to a user,” and adds that a person having ordinary skill in the art “could have qualified . . . with more formal education and less practical or industry experience, or vice versa.” Prelim. Resp. 9 (citing Ex. 2001 ¶ 32). Although not identical, the parties’ definitions are substantially similar. Accordingly, for purposes of this Decision, we determine that no express finding is necessary, and that the level of ordinary skill in the art is reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We note, however, that our obviousness analysis in this Decision would not differ if we adopted either Petitioner’s or Patent Owner’s definition. slip op. at 7
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites GrahamPatents in suitUS 9,430,042 - PTAB · Jul 24, 2024 · IPR2024-00477 · APJ Patrick R Scanlon · IPR · Institution
Instituted IPR of claims 1–7 on all asserted grounds because the Petition showed a reasonable likelihood of prevailing on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, we determine that Petitioner has demonstrated a reasonable likelihood that it would prevail with respect to at least one challenged claim. Accordingly, we institute an inter partes review of the challenged claims on the grounds set forth in the Petition.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“does not provide any authority supporting its position that failure to provide a Sotera stipulation “neutralizes” or “undercuts” the impact of a stay. We also disagree with Patent Owner’s suggestion that a district court stay can make discretionary denial inappropriate only when coupled with a Sotera stipulation. See Prelim. Resp. 59. Again, Patent Owner does not provide any authority supporting this position. Id. Contrary to Patent Owner’s positions, Fintiv indicates a district court stay “has strongly weighed against exercise of the authority to deny institution” independent of whether a Sotera stipulation—or any other type of stipulation—has been submitted. Fintiv at 6.” slip op. at 14
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Other
“time it was made, 35 U.S.C. § 103 requires us to resolve the level of ordinary skill in the pertinent art at the time of the invention. Graham v. John Deere Co., 383 U.S. 1, 17 (1966). The person of ordinary skill in the art is a hypothetical person who is presumed to have known the relevant art at the time of the invention. In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). Factors that may be considered in determining the level of ordinary skill in the art include, but are not limited to, the types of problems encountered in the art, the sophistication of the technology, and educational level of active workers in the field. Id. In a given case, one or more factors may predominate. Id.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We do not discern a need to construe explicitly any other claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites GrahamPatents in suitUS 7,336,260 - Hunter’S Manufacturing Company, Inc. D/B/A Tenpoint Crossbow Technologies v. Ravin Crossbows, LLCAll claims unpatentablePTAB · Jul 9, 2024 · IPR2023-00407 · APJ Robert J Silverman · IPR · Final written decision
Claim 1 is unpatentable as anticipated by Stanziale ’771; the Board did not reach the alternative grounds.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“As an initial matter, the recited expression “mounted to” is broad. The Federal Circuit has explained that words in a claim “will ordinarily be given their full meaning,” without imposing narrowing modifications on the claim language. Johnson Worldwide, 175 F.3d at 989, see also Virginia Panel, 133 F.3d at 865–66. As to whether the “mounted to” connection may be an indirect connection, the parties agree that an indirect connection is permitted — a view that is amply supported by the intrinsic record, as discussed above. With regard to the types of movement that may occur between a “string guide” and a corresponding “limb,” the intrinsic record shows that that various types of movements (including no movement at all) are characterized as “mounted to.” Slight variations of “mounted to,” occurring in the intrinsic record, are helpful in understanding the claim language — particularly because the ’015 patent itself uses such a variant (“mounted . . . on”) to describe the very connection (between a “string guide” and a “limb”) that is elsewhere, and in claim 1, is described as “mounted to.” See Ex. 1001, 5:23–26.” slip op. at 22
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“Patent Owner’ sole argument — i.e., that Stanziale ’771 fails to teach the “mounted to” limitation — is based upon its construction of the “mounted to” limitation, which permits the “string guide” to be rotatable relative the corresponding “limb,” but permits no other type of relative motion. See PO Resp. 4, 13–14. As discussed above, we do not accept Patent Owner’s construction of the “mounted to” limitation. In Stanziale ’771, first and second pulleys 145, 146, and interconnecting pivot 147 (all three of which Petitioner maps to claim 1’s “string guide[s]”) are pivotally connected to a number of intermediate members (e.g., lever arms or pushing arms 32, connecting elements 27, and constraining member 29) which are, in turn, pivotally connected to elastic members 10 (which Petitioner maps to claim 1’s “limb[s]”). See Pet. 41–42 (citing Ex. 1012 7:9–17, 8:26–8:13, 11:8–9, 14:18–15:22, 16:24–25, 16:29, 17:2, 17:15–17, 17:24–27, 19:12–30, 20:32–21:16, Figs. 1–7; Ex. 1016 ¶¶ 177–179); see also Ex. 1012 11:3–7, 11:34–12:4, 12:10–17, 16:29–18:3, 18:22–19:30, Figs. 8, 9, 10a, 10b. Therefore, Stanziale ’771, in Petitioner’s mapping, teaches the “string guide[s]” connected indirectly to the “limb[s].” Per the construction of the “mounted to” limitation employed herein (“connected to, either directly or indirectly”), Petitioner establishes, by a preponderance of the evidence, that Stanziale ’771 teaches the “string guide[s]” “mounted to” the “limb[s],” as recited in claim 1 of the ’015 patent. Contrary to Patent Owner’s concerns (see Paper 47, 1), the indirect connection between Stanziale ’771’s “string guide[s]” and “limb[s]” is not “unbounded.” Rather, the connection disclosed by Stanziale ’771 is the type of indirect connection supported by the intrinsic record. See supra § II.B. Patent Owner’s contention that “a POSA would be disinclined to rely on [Stanziale ’771] as a reference for the improved crossbow design disclosed in Claim 1” is not persuasive. See PO Resp. 38 (citing Ex. 2029 ¶ 46). The test for anticipation is whether a prior art reference discloses each and every element recited in the claim, not whether one of ordinary skill in the art would have been inclined to rely on the reference. See Net MoneyIN, Inc., 545 F.3d at 1369.” slip op. at 32
- ExcludeMotion to exclude, deniedMixed
“Motions to exclude evidence are authorized under 35 C.F.R. § 42.64. Rule 42.64(b)(1) states: “Once a trial has been instituted, any objection [to evidence] must be filed within five business days of service of evidence to which the objection is directed.” Further, “[t]he objection must identify the grounds for the objection with sufficient particularity to allow correction in the form of supplemental evidence.” 35 C.F.R. § 42.64(b)(1). “A motion to exclude evidence must be filed to preserve any objection.” 35 C.F.R. § 42.64(c).” slip op. at 40
- Expert testimonyPatent owner expert creditedDecided for patent owner
“In the present proceeding, Petitioner proposed — and Patent Owner does not dispute (see PO Resp. 3) — the following definition of a person of ordinary skill in the art: A hypothetical POSA to which the ’015 Patent pertains would be a technical person who has at least some experience working in the field of archery, reviewing crossbows or engineering related to bows and/or crossbows, and is generally familiar with prior art crossbows. (Ex. 1016 ¶17.) Such a person would likely have at least a bachelor’s degree in mechanical engineering or, alternatively, would have several years of experience in the field of archery or engineering related to bows and/or crossbows. (Id.) Pet. 28. As discussed above, we adopt Petitioner’s description of a person of ordinary skill for the purposes of this Decision. See supra § II.A. Petitioner alleges various deficiencies in Mr. Teater’s background, education, and knowledge. Paper 39, 4–8. Nevertheless, Mr. Teater satisfies the definition, of a person of ordinary skill in the art, that Petitioner advanced. Specifically, Mr. Teater has reviewed crossbows for 14 years, encompassing the relevant priority date for the ’015 patent, during which time he wrote evaluations of various bows and crossbows, developed and published testing standards for crossbows, and served on the Archery Trade Association’s technical committee for standards and guidelines. Paper 41, 4 (citing Ex. 2029 ¶¶ 3, 4, 7). Accordingly, Mr. Teater satisfies Petitioner’s definition of “a technical person who has at least some experience working in the field of archery, reviewing crossbows or engineering related to bows and/or crossbows, and is generally familiar with prior art crossbows.” Pet. 28. Petitioner emphasizes that Mr. Teater “does not have a degree in mechanical engineering.” Paper 39, 4 (citing Ex. 2034, 1; Ex. 1034, 43:20–44:5). However, no degree of any kind is mandatory for satisfying Petitioner’s definition of a person of ordinary skill in the art. Indeed, Petitioner’s definition states that “[s]uch a person would likely have at least a bachelor’s degree in mechanical engineering or, alternatively, would have several years of experience in the field of archery or engineering related to bows and/or crossbows.” Pet. 28 (emphasis added). There is no dispute that Mr. Teater meets this standard. Petitioner raises various other issues that form no part of the definition that Petitioner advanced — for example, whether Mr. Teater has taught courses related to crossbows, whether he is named as an inventor on a” slip op. at 36
Patent outcomesUS 9,354,015 unpatentableClaim construction§ 102 anticipationcites PhillipsPatents in suitUS 9,354,015 - PTAB · Jun 24, 2024 · IPR2024-00380 · APJ Sheldon M Mcgee · IPR · Institution
The Board instituted IPR on claims 1–5, 7, and 9–14 on all asserted grounds, finding a reasonable likelihood of prevailing on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDecided for petitioner
“because they are premised on a misapplication of our precedent. Providing a document to the Office in an Information Disclosure Statement is sufficient to satisfy AB prong one as long as that “previously presented” art is “the same or substantially the same” as that presented in the Petition. See Advanced Bionics, 7–8 (holding that “[p]reviously presented art includes . . . art provided to the Office by an applicant, such as on an Information Disclosure Statement (IDS), in the prosecution history of the challenged patent”). As we have already found, there are no material differences between the asserted art and the prior art involved during examination under BD factor (a). Petitioner provides no authority that requires us to interpret “involved during examination” under BD factor (a) as “used in a rejection” or “mentioned by the examiner” (Pet. 60), and we are aware of none. Patent Owner’s position, in that regard, appears to conflate the first AB prong (whether the art previously was presented to the Office) with an aspect of the second AB prong (the extent to which the Examiner considered that art).” slip op. at 11
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). The findings and conclusions set forth in this Decision are provided for the exclusive purpose of explaining our determination that Petitioner has met that standard on this record. slip op. at 6
- Skill levelSkill level petitioner adoptedDecided for petitioner
“have had “at least a bachelor’s degree in a field such as chemistry, physics, or chemical engineering, as well as at least two years of experience with plasma-polymerization techniques.” Pet. 20 (citing Ex. 1002 ¶¶ 22–29). Patent Owner does not propose a different level of skill in the art at this stage of the proceeding. See Prelim. Resp., generally. On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). A more specific definition is not necessary for purposes of deciding whether to institute review. To the extent a more specific definition is required, however, we adopt Petitioner’s proposed unchallenged definition because, on this record, it is consistent with the disclosures of the asserted prior art references.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner asserts that the claimed term “aryl” should be construed to mean “an aromatic ring system.” See Pet. 20–23. Patent Owner does not propose a different claim construction at this stage of the proceeding. See Prelim. Resp., generally. After review of the preliminary record, we determine that no claim terms need to be construed for purposes of institution. See Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”).” slip op. at 8
Claim construction§ 103 obviousnessDiscretionary denialcites PhillipsPatents in suitUS 11,041,087 - PTAB · May 31, 2024 · IPR2024-00255 · APJ Patrick R Scanlon · IPR · Institution
The Board instituted IPR of claims 1–4 and 6–11 on both asserted obviousness grounds, finding a reasonable likelihood that Petitioner would prevail on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“that, because judgments have been entered in the district court actions, there is finality as that relates to Fintiv issues. In a similar instance, where a district court’s § 101 determination was appealed to the Federal Circuit, the Director determined that the Board had the authority to institute an inter partes review and a Fintiv analysis should be performed. See Volvo Penta of the Americas, LLC v. Brunswick Corp., IPR2022-01366, Paper 15 at 1–8 (PTAB May 2, 2023). The Director has additionally distinguished a Fintiv analysis under similar circumstances to those here, where “the district court’s judgment of invalidity under 35 U.S.C. § 101, i.e., a statutory ground that could not have been raised before the Board, does not raise concerns of inefficient duplication of efforts or potentially inconsistent results between the Board and the district court.” AviaGames, Inc., Paper 14 at 3. Further, the Director determined that, “the challenged claims have not yet been cancelled and remain in force until the opportunity to appeal has been exhausted,” noting that “[b]y the time an appeal will have concluded, Petitioner will be barred under 35 U.S.C. § 315(b) from bringing a new challenge in an IPR petition.” Id. at 3–4. Fintiv states that “a district court stay of the litigation pending resolution of the PTAB trial allays concerns about inefficiency and discern that the § 101 issues addressed in the Federal Circuit appeal would duplicate the anticipation and obviousness issues addressed here. Accordingly, given the limited § 101 issues on appeal, we do not discern there are any concerns about duplication of efforts. Moreover, because of the uncertainty of the timing of any remand from the Federal Circuit to the district court to address any anticipation or obviousness issues, the present circumstances with a pending appeal effectively act as a stay on the assessment of invalidity issues.9” slip op. at 12
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, we determine that Petitioner has demonstrated a reasonable likelihood that it would prevail with respect to at least one challenged claim. Accordingly, we institute an inter partes review of the challenged claims on the grounds set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“of ordinary skill in the art. Pet. 7 n.2 (citing Ex. 1003 ¶¶ 8, 10, 26). Dr. Sundaresan testifies that a person having ordinary skill in the art “had at least a Bachelor’s degree in electrical engineering, computer science, or a similar discipline, and at least two years of experience in the field working with . . . navigation and/or geolocation systems,” and “[s]uperior education could compensate for a deficiency in work experience, and vice-versa.” Ex. 1003 ¶ 8. For the purposes of its Preliminary Response, Patent Owner does not dispute Petitioner’s definition of the level of ordinary skill in the art. Prelim. Resp. 32. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’104 patent and the prior art. See” slip op. at 7
- Prior constructionPrior construction adoptedDecided for petitioner
“For purposes of this Decision, we adopt the district court’s construction of “grid point” as “a point associated with representative calibration data for an area.” See Ex. 1054, 18–20. This construction is consistent with the claim language and the specification of the ’104 patent and is further supported by the reasoning provided by the district court’s claim construction order. See id. We do not discern a need to construe explicitly any other claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
Claim construction§ 103 obviousnessDiscretionary denialcites GrahamPatents in suitUS 7,561,104 - Micron Technology, Inc. v. Katana Silicon Technologies LLCAll claims unpatentablePTAB · May 13, 2024 · IPR2023-00071 · APJ Julia Heaney · IPR · Final written decision
Claims 3–5, 8, 11, 20–22, 27–29, 31, and 33 are unpatentable as obvious over the stated combinations of prior art and skilled-artisan knowledge.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner
“On the fully developed record, we find that Petitioner’s construction, “a layer that adheres,” is more strongly supported by the evidence than Patent Owner’s construction, “a pre-formed layer that is adhered.” Our analysis begins with the claim language. The term “adhesion layer” appears in each of the ’806 patent’s independent claims, which include both method and device claims. See, e.g., Ex. 1001, 13:44–63 (claim 1 directed to a “semiconductor device”); id. at 17:58–18:17 (claim 30 directed to a “method of manufacturing a semiconductor device”). Claim 1 recites “a first semiconductor chip having a first adhesion layer adhered to its back surface” and “a second semiconductor chip having a second adhesion layer adhered to its back surface.” Id. at 13:49–51, 13:54–56 (emphasis added). Claim 30 recites the steps of “forming a first insulating adhesion layer on a back surface of a first wafer” and “forming a second insulating adhesion layer on a back surface of a second wafer.” Id. at 17:60–62, 18:3–5 (emphases added). In the absence of contrary evidence, we must assume that the term “adhesion layer” has the same meaning in all claims of the ’806 patent. In re Varma, 816 F.3d 1352, 1363 (Fed. Cir. 2016) (“the principle that the same phrase in different claims of the same patent should have the same meaning is a strong one, overcome only if ‘it is clear’ that the same phrase has different meanings in different claims,” quoting Fin Control Sys. Pty, Ltd. v. OAM, Inc., 265 F.3d 1311, 1318 (Fed. Cir. 2001)). The language of claim 30 and similarly worded claims of the ’806 patent suggests strongly that an “adhesion layer” may be formed in situ on the back surface of a wafer and need not be pre-formed, as argued by Patent Owner. The testimony of Patent Owner’s expert, Mr. Elenius, supports this interpretation. See Ex. 2014 ¶¶ 43, 50 (testifying that a person of ordinary skill in the art “would recognize that there are multiple methods of forming an ‘adhesion layer’ on the back surface of the semiconductor chip” and that “[p]astes and other adhesives, adhesive agents, adhesive layers or other material that are dispensed onto a substrate or chip back are formed into a layer over time as they harden through curing” (emphasis added)). Thus, the language of claims 30 and 31 does not support Patent Owner’s construction that the “adhesion layer” must be a pre-formed layer that is adhered. Cf. PO Resp. 22–25 (arguing for that construction).” slip op. at 17
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Citing testimony from Dr. Suhling, Petitioner asserts that a person of ordinary skill in the art at the priority date of the ’806 patent would have had i) a bachelor-level degree in electrical engineering, mechanical engineering, material science, or a related subject and five or more years of experience working in the field of semiconductor packaging; ii) a Master’s-level degree in mechanical engineering, electrical engineering, material science, or a related field, and at least 1-3 years of experience in the design/development of semiconductor packages; or iii) a Ph.D.- level degree in mechanical engineering, material science, electrical engineering, or a related field, and at least some experience in the area of semiconductor packaging. Pet. 17–18 (citing Ex. 1002 ¶¶ 28–32). Petitioner further states that “[a]dditional education may substitute for professional experience, and significant work experience may substitute for formal education.” Pet. 18. Patent Owner’s declarant, Mr. Elenius, states that a person of ordinary skill in the art would have had “a bachelor’s degree in electrical, mechanical or materials engineering and two to three years of experience in the design or development of semiconductor manufacturing, or the equivalent.” Ex. 2014 ¶ 32. Mr. Elenius further states that “[a]dditional graduate education could substitute for professional experience, or significant experience in the field could substitute for formal education.” Id. For purposes of this Decision, we find no meaningful differences” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“3. Reasons to Combine Petitioner contends that it would have been obvious for a person of ordinary skill in the art to combine Ball’s teachings of stacking chips with Mostafazadeh’s process for applying adhesive to create individual chips with adhesive backsides. Pet. 28–29. Petitioner contends that a person of ordinary skill would have been motivated to combine the teachings of Ball and Mostafazadeh for several reasons, including to provide a more efficient manufacturing process for multichip modules and to simplify the stacking process. Pet. 28–31. Patent Owner argues that a person of ordinary skill would not have been motivated to combine Mostafazadeh with Ball because there would have been no reasonable expectation of success and the combination would not have resulted in a functioning semiconductor device. PO Resp. 39. Patent Owner asserts that Petitioner’s combination of Ball and Mostafazadeh would fail for multiple reasons and that Mostafazadeh does not describe multi-chip stacked mounting. Id. at 39–52. Having considered the evidence and arguments, we determine that the preponderance of the evidence favors Petitioner. Petitioner demonstrates persuasively that a person of ordinary skill in the art would have had reasons to combine Ball’s stacked multichip module with Mostafazadeh’s process for applying adhesive at the wafer stage and then dicing to create individual chips with adhesive backsides. Pet. 28–31. In particular, Petitioner shows that a person of ordinary skill in the art would have considered Mostafazadeh’s teaching of applying the adhesive to a wafer surface and then subsequently dicing the wafer in order to provide a more efficient manufacturing process for multichip modules and to simplify Ball’s process of stacking chips. Id.; see KSR, 550 U.S. at 417 (stating that the “mere application of a known technique to a piece of prior art ready for the improvement” suggests obviousness). The teachings of both Ball and Mostafazadeh support Petitioner’s combination. Ball teaches a stacked multichip module using flip-chip and wire bond interconnections, where a lower chip is flip-chip connected to a substrate using metal bumps, and an upper chip is wire bond connected to the substrate. Ex. 1005, Abstract, 3:42–64, 4:58–59, 5:3–12, 5:18–20, 5:23– 27, Fig. 1. Ball teaches that the upper chip is attached to the lower chip in a back-to-back arrangement with a layer of adhesive applied over a back side of the lower chip. Id. Mostafazadeh teaches a method for applying integrated circuit dies to support surfaces. Ex. 1003, Abstract. In Mostafazadeh’s method, an adhesive coating is formed on a surface of a semiconductor wafer, the adhesive coating is dried, and the semiconductor wafer is diced to form integrated circuit dies, each having an adhesive layer on its mounting surface, i.e., its back surface. Id. at 3:5–11, 5:20–25, 7:9–11, 7:29–8:2, Fig. 2 (steps 104–110). A selected die is then attached to an associated support surface by placing the adhesive layer of the selected die in contact with the associated support surface. Id. at 3:11–13, 8:10–12, Fig. 2 (steps 112–118).” slip op. at 33
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“After considering the parties’ arguments and evidence, we determine that Petitioner meets its burden of proof for claim element [3d]. Our finding is supported by Figure 1 of Ball, which depicts a second chip mounted to a first chip in a back-to-back arrangement. Ex. 1002 ¶ 158; Ex. 1005, Fig. 1. More particularly, Ball’s Figure 1 shows that back side 32 of upper die 12 (the claimed “second semiconductor chip”) is mounted to back side 30 of lower die 14 (the claimed “first semiconductor chip”) by adhesion layer 28. Ex. 1005, 5:18–20. Relying on Dr. Suhling’s testimony, Petitioner shows persuasively that “a circuit is formed on the front surface 34 of upper die 12 . . . , as evidenced by bonding pads 36 and wires 38 connecting the upper die’s circuitry to the wiring layer on substrate 16.” Pet. 41; Ex. 1002 ¶ 159. We credit Dr. Suhling’s unrebutted testimony that, “[b]ecause the circuitry is on the front side of upper die 12, a [person of ordinary skill in the art] would know that the back surface adhesive layer is ‘where a circuit is not formed.’” Ex. 1002 ¶ 159. Patent Owner argues that, to meet claim elements [3b] and [3d], “a reference must show that an adhesion layer extends to cover the entire back surface of the second semiconductor chip where a circuit is not formed.” PO Resp. 30. We find no support in the claim language or other intrinsic evidence for Patent Owner’s argument. In our view, the phrase “back surface where a circuit is not formed” identifies the back side of the chip as opposed to the front side, where a circuit is formed. Ex. 1001, 14:26–27 (claim element [3d]). Our interpretation is supported by the claim language as a whole. Claim element [3b], for example, recites “a first semiconductor chip having a circuit forming on its front surface and an adhesion layer adhered to its back surface.” Id. at 14:17–19 (emphasis added). In this” slip op. at 47
Patent outcomesUS RE38,806 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR - Micron Technology, Inc. v. Katana Silicon Technologies LLCAll claims unpatentablePTAB · May 13, 2024 · IPR2023-00072 · APJ Julia Heaney · IPR · Final written decision
Claims 1, 2, 6, 7, 9, 10, 12–19, 23–26, 30, and 32 are unpatentable as obvious over the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Although the proposals for the level of skill in the art by the parties’ declarants have differences in wording, we find no meaningful differences between the parties’ respective definitions that would materially alter the outcome of this Decision. Nevertheless, based on our review of the ’806 patent, the types of problems and solutions described in the ’806 patent, and cited prior art, we adopt and apply Petitioner’s definition of the level of ordinary skill in the art.” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionGranted
“On the fully developed record, we find that Petitioner’s construction, “a layer that adheres,” is more strongly supported by the evidence than Patent Owner’s construction, “a pre-formed layer that is adhered.”” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“Petitioner shows persuasively that a person of ordinary skill in the art would have had a reasonable expectation of success in combining Mostafazadeh with Ball and Fogal. Pet. 32–33. The evidence discussed above concerning reasons to combine supports a reasonable expectation of success. We are also persuaded by Dr. Suhling’s testimony that the “combination of Ball, Fogal, and Mostafazadeh would require no modification of the multichip modules in Ball and Fogal: rather Mostafazadeh merely explains in more detail methods known in the art for creating chips with adhesive surfaces.” Ex. 1002 ¶ 239; see also id. ¶¶ 62– 69 (describing prior art methods for applying adhesive to the backside of a wafer). For the foregoing reasons, we find that Petitioner has demonstrated that a person of ordinary skill in the art would have had a reasonable expectation of successfully combining Ball, Fogal, and Mostafazadeh.” slip op. at 46
- ExcludeOther
“We do not discuss or cite any of these exhibits in this Decision, or rely on any of them in reaching our determination that all of the challenged claims are unpatentable. Because their presence in the record would not affect our analysis in this Decision, we dismiss as moot Petitioner’s motion with respect to these exhibits.” slip op. at 72
Patent outcomesUS RE38,806 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR - Micron Technology, Inc. v. Katana Silicon Technologies LLCAll claims unpatentablePTAB · May 13, 2024 · IPR2023-00073 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1–15 are unpatentable under §103: the Board found the asserted combinations taught the limitations, with motivation to combine and a reasonable expectation of success.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“The claim language, “forming” an “adhesion layer on a back surface,” suggests strongly that an “adhesion layer” may be formed in situ on the back surface of a wafer. The testimony of Patent Owner’s expert, Mr. Elenius, supports this interpretation. See Ex. 2014 ¶¶ 43, 50 (testifying that a person of ordinary skill in the art “would recognize that there are multiple methods of forming an ‘adhesion layer’ on the back surface of the semiconductor chip” and that “[p]astes and other adhesives, adhesive agents, adhesive layers or other material that are dispensed onto a substrate or chip back are formed into a layer over time as they harden through curing” (emphasis added)). Thus, the language of the claims of the ʼ879 patent does not support Patent Owner’s construction that the “adhesion layer” must be a preformed layer that is adhered. Cf. PO Resp. 21–23 (arguing for that construction).” slip op. at 16
- Skill levelSkill level petitioner adoptedDecided for petitioner
“For purposes of this Decision, we find no meaningful differences between the parties’ respective definitions that would materially alter the outcome of this Decision. Nevertheless, based on our review of the ’879 patent, the types of problems and solutions described in the ’879 patent, and cited prior art, we adopt and apply Petitioner’s definition of the level of ordinary skill in the art.” slip op. at 13
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Mostafazadeh, could overflow.” PO Resp. 41, 42 (citing Ex. 2014 ¶ 121). According to Patent Owner, the downward pressure during mounting “could cause adhesive to squeeze out.” Id. at 41. We find that Patent Owner’s argument and the corresponding testimony of Mr. Elenius are speculative and do not outweigh Petitioner’s evidence of obviousness. The overflow issue was recognized and addressed by Mostafazadeh. Contrary to Patent Owner’s argument, Mostafazadeh provides explicitly that its adhesive layer “covers an entire mounting surface 190 of the selected integrated circuit dies 182 and does not extend beyond a boundary of the mounting surface 190.” Ex. 1003, 10:6–9 (emphasis added). Additionally, Mostafazadeh teaches that when “the adhesive layer is rolled on, it is exactly the same size as the mounting surface and is quite even. Thus, when the die is attached to its supporting surface the adhesive does not extend beyond the mounting surface of the die.” Id. at 9:15–18. Further, Mostafazadeh teaches that its process avoids the adhesive jutting around the edges of the die. Id. at 2:26–28. These teachings support that a person of ordinary skill in the art would have had a reasonable expectation of successfully applying Mostafazadeh’s die attachment method to Ball’s multichip device while avoiding adhesive overflow. Next, Patent Owner argues that Petitioner’s combination would fail” slip op. at 40
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“preponderance of the evidence favors Petitioner. Petitioner demonstrates persuasively that a person of ordinary skill in the art would have had reasons to combine Ball’s stacked multichip module using flip-chip and wire bond connections with Mostafazadeh’s process for applying adhesive to create individual chips with adhesive backsides. Pet. 25–28. In particular, Petitioner shows that a person of ordinary skill in the art would have considered Mostafazadeh’s teaching of applying the adhesive to a wafer surface and then subsequently dicing the wafer in order to provide a more efficient manufacturing process for multichip modules and to simplify Ball’s process of stacking chips. Id.; see KSR, 550 U.S. at 417 (stating that the “mere application of a known technique to a piece of prior art ready for the improvement” suggests obviousness). The teachings of both Ball and Mostafazadeh support Petitioner’s” slip op. at 33
Patent outcomesUS 6,352,879 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 6,352,879 - PTAB · May 10, 2024 · IPR2024-00259 · APJ Sheila F Mcshane · IPR · Institution
The Board instituted inter partes review of claims 1, 7, 9, 32, 38, and 40 on the asserted obviousness ground over Bhattacharya and Yost.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“that because judgements have been entered in the district court actions, this suggests finality. In a similar instance in Volvo, where a district court’s § 101 determination was appealed to the Federal Circuit, the Director determined that the Board had the authority to institute an inter partes review and a Fintiv analysis should be performed. See Volvo Penta of the Americas, LLC v. Brunswick Corp., IPR2022-01366, Paper 15 at 1–8 (PTAB May 2, 2023). The Director has additionally distinguished the Fintiv analysis in AviaGames under similar circumstances to those here, where “the district court’s judgment of invalidity under 35 U.S.C. § 101, i.e., a statutory ground that could not have been raised before the Board, does not raise concerns of inefficient duplication of efforts or potentially inconsistent results between the Board and the district court.” AviaGames, IPR2022- 00530, Paper 14 at 3 (PTAB Mar. 2, 2023) (Decision on Director Review). Further, the Director determined that “the challenged claims have not yet been cancelled and remain in force until the opportunity to appeal has been exhausted,” noting that “[b]y the time an appeal will have concluded, Petitioner will be barred under 35 U.S.C. § 315(b) from bringing a new challenge in an IPR petition.” Id. at 3–4. Fintiv states that “a district court stay of the litigation pending resolution of the PTAB trial allays concerns about inefficiency and duplication of efforts.” Fintiv at 6. In view of the circumstances, we do not discern that the § 101 issues addressed in the Federal Circuit appeal duplicate the obviousness issues addressed here. The timing of the progress of the appeal and any potential remand to the district court is uncertain. Accordingly, given the limited § 101 issues on appeal, we do not discern there are any concerns about duplication of efforts. Moreover, because of the uncertainty of the timing of any remand from the Federal Circuit to the district court to address any obviousness issues, the present circumstances with a pending appeal effectively act as a stay on the assessment of invalidity issues.” slip op. at 10
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“viii. Conclusion Accordingly, we are persuaded that Petitioner has demonstrated a reasonable likelihood that it would prevail in showing that claim 1 is rendered obvious by Bhattacharya and Yost.” slip op. at 32
- Skill levelSkill level petitioner adoptedOther
“IV. ANALYSIS A. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art: would have had at least a Bachelor’s degree in electrical engineering, computer science, or a similar discipline, and at least two years of experience in the field working with working with navigation and/or geolocation systems. Pet. 6–7 (citing Ex. 1003 ¶ 8). Petitioner also contends that additional education could compensate for less work experience and vice versa. Id. at 7. For the purposes of the Preliminary Response, Patent Owner adopts Petitioner’s asserted level of ordinary skill in the art. Prelim. Resp. 26. For the purposes of this Decision, we adopt the assessment offered by Petitioner, except for the inclusion of “at least,” as it is consistent with the ’753 patent and the prior art before us. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 16
- Prior constructionPrior construction adoptedOther
“patent and district court issued claim constructions for some terms that were disputed. Ex. 1020; Ex. 1025. Petitioner uses the district court’s construction or the agreed-upon construction for the terms “calibration data,” “calibration points,” “grid point,” “network measurement report,” and the order of the “providing,” “generating,” “evaluating,” and “selecting” steps of claim 1. Pet. 7–9 (citing Ex. 1020; Ex. 1025). Petitioner proposes that all terms should be interpreted consistent with the Phillips standard. Id. at 7. Patent Owner “does not dispute Petitioner’s statement on claim construction for the purposes of this Preliminary Response” and “reserves the right to present arguments on the constructions should the Petition be instituted.” Prelim. Resp. 26. For the purposes of this Decision, we will use the district court’s claim constructions and those agreed-upon by the parties in the litigations, where the adoption of those constructions have been agreed to by the parties at this juncture in this proceeding. We determine that we need not expressly construe any other claim terms at this juncture. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 17
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 8,406,753
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.