• Røde Microphones, LLC / Freedman Electronics Pty Ltd. v. Zaxcom, Inc.No claims unpatentable
  PTAB · Jun 11, 2026 · IPR2025-00232 · APJ Miriam L Quinn · IPR · Final written decision

  The Board held that Petitioner did not prove any challenged claims of the ’207 patent unpatentable under the Strub, Woo, Nagai, and Gleissner obviousness ground.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “in these respects. The preambles of claims 17 and 59 recite the “audio device wearable by a user for storing locally generated audio.” There is neither mention of “multi-track” audio in the claim, nor is the audio device limited to capturing a single source of sound, such as a single performer. Accordingly, we are not persuaded that the ’443 and ’207 patent claims support the limited scope that Patent Owner urges for the term “locally generated audio.” None of Patent Owner’s citations to the specification define or require that the “locally generated audio” correspond to audio generated only by a single performer. See, e.g., 230 IPR, Ex. 1001, 8:59−62 (stating that the local audio input device “may be worn by the performer and connects to local audio device 102 at local audio input device port 314”). Patent Owner’s argument that the specification “teaches a single creator/performer per local audio device” is well-taken, but the teachings do not indicate the intent to exclude other sounds from being captured at the local audio device (or indicate how the device would prevent the capture of other sounds, such that the audio would be “isolated” as Patent Owner contends). See 230 Sur-Reply 10 (citing 230 IPR, Ex. 1001, 4:28−32, 10:29−34, and Insituform Techs., Inc. v. Cat Contr., Inc., 99 F.3d 1098, 1105 (Fed. Cir. 1996) (“[C]laim 1 refers to ‘a cup’ and ‘the cup’ repeatedly, suggesting that only one cup is involved . . . . [N]either the specification nor the drawings disclose the use of more than one cup.”)). For instance, the specification describes that the “independent track of audio is received from one of the performer’s local audio device 102.” 230 IPR, Ex. 1001, 10:33−34. Thus, in this description the audio track corresponds to the audio captured by a particular audio device—which was worn by the performer— but does not limit that captured audio to only sounds made by the performer. As to the “local audio data” term, Patent Owner argues that “audio data” means “mono or stereo audio files created from independent, isolated locally generated audio files, such files suitable for creation of a multi-track audio file.” 230 PO Resp. 9−10 (citing Ex. 2140 ¶¶ 131, 134). This argument is unsupported by the claim language or specification. The claim does not require the creation of audio files, much less a “multi-track audio file.” The specification describes storing audio files in memory without the specificity that Patent Owner urges we adopt. See 230 IPR, Ex. 1001, 13:1−14. Accordingly, we are not persuaded by Patent Owner’s proposed construction of “local audio data.” Rather, we understand “audio data” to have a plain and ordinary meaning, such as the one given to the term by the District Court in the underlying litigation. 230 IPR, Ex. 1037, 10. We adopt the District Court’s construction of “audio data” to mean “data comprising audio signals in digital form.” Id. This finds support in the specification as the audio is described as being converted into digital audio and stored in a file. See 230 IPR, Ex. 1001, 13:1−14. Our conclusion is consistent with the plain and ordinary meaning of the term as that would be understood by a person of ordinary skill in the art, and we see no reason to deviate from the conclusions of the District Court on this point.” slip op. at 20

  • Prior constructionPrior construction adoptedDecided for petitioner

    “data” means “mono or stereo audio files created from independent, isolated locally generated audio files, such files suitable for creation of a multi-track audio file.” 230 PO Resp. 9−10 (citing Ex. 2140 ¶¶ 131, 134). This argument is unsupported by the claim language or specification. The claim does not require the creation of audio files, much less a “multi-track audio file.” The specification describes storing audio files in memory without the specificity that Patent Owner urges we adopt. See 230 IPR, Ex. 1001, 13:1−14. Accordingly, we are not persuaded by Patent Owner’s proposed construction of “local audio data.” Rather, we understand “audio data” to have a plain and ordinary meaning, such as the one given to the term by the District Court in the underlying litigation. 230 IPR, Ex. 1037, 10. We adopt the District Court’s construction of “audio data” to mean “data comprising audio signals in digital form.” Id. This finds support in the specification as the audio is described as being converted into digital audio and stored in a file. See 230 IPR, Ex. 1001, 13:1−14. Our conclusion is consistent with the plain and ordinary meaning of the term as that would be understood by a person of ordinary skill in the art, and we see no reason to deviate from the conclusions of the District Court on this point.” slip op. at 21

  • Obviousness (§103) › Objective indicia / secondary considerations › Skepticism / industry praiseObjective indicia with nexusDecided for patent owner

    “1. Industry Praise: Academy and Emmy Awards Patent Owner argues that it “revolutionized [the] industry with the” slip op. at 97

  • Obviousness (§103) › Objective indicia / secondary considerations › Long-felt need / failure of othersDecided for patent owner

    “2. Long-Felt Need Patent Owner further proffers the testimony of two witnesses as” slip op. at 104

  Patent outcomesUS 10,276,207 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 10,276,207
• Røde Microphones, LLC / Freedman Electronics Pty Ltd. v. Zaxcom, Inc.No claims unpatentable
  PTAB · Jun 11, 2026 · IPR2025-00230 · APJ Miriam L Quinn · IPR · Final written decision

  The Board determined that Petitioner had not shown any challenged claims of the ’443 or ’207 patents unpatentable, including under the asserted obviousness grounds.

  RulingsFinal written decision

  • Expert testimonySkill level petitioner adoptedOther

    “E. Level of Ordinary Skill in the Art Based on the argument and evidence presented in the Petition and Patent Owner’s preliminary response, we determined, as stated in our Decision on Institution, that “a person of ordinary skill in the art would have had a Bachelor’s degree in electrical engineering and two or more years of experience working with audio and wireless communications systems.” 230 Dec. on Inst. 16; 232 Dec. on Inst. 22−23. Patent Owner reiterates its position that a person of ordinary skill the art would have had “a bachelor’s degree in electrical engineering or a related subject and two to five years’ experience working with multi-track audio and wireless communications systems in the professional performance industry.” 230 IPR, PO Resp. 6−7 (emphasis added) (identical passage in 232 PO Resp. 8). Thus, the dispute centers on whether the level or ordinary skill includes specific work experience with multi-track audio in the professional performance industry. We do not agree that this specific work experience is necessary to the level of ordinary skill in the instant proceedings. In determining whether an invention would have been obvious at the time it was made, we consider the level of ordinary skill in the pertinent art at the time of the invention. Graham v. John Deere, 383 U.S. 1, 17−18 (1966). “The importance of resolving the level of ordinary skill in the art lies in the necessity of maintaining objectivity in the obviousness inquiry.” Ryko Mfg. Co. v. Nu‑Star, Inc., 950 F.2d 714, 718 (Fed. Cir. 1991). The “person of ordinary skill in the art” is a hypothetical construct, from whose vantage point obviousness is assessed. In re Rouffet, 149 F.3d 1350, 1357 (Fed. Cir. 1998). In determining the level or ordinary skill, we may consider various factors including “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, 57 F.3d 1573, 1579, (Fed. Cir. 1995) (quoting Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986)). Patent Owner’s proposed specificity of work with multi-track audio in a professional performance industry is not supported by the record. First, Patent Owner submits conclusory declaration testimony of James DeFilippis—repeating verbatim, and without any supported reasoning, Patent Owner’s proposed level of ordinary skill. Ex. 2140 ¶ 15. As such, the testimony is not persuasive. Second, Patent Owner’s additional declaration testimony of Jack” slip op. at 12

  • Prior constructionPrior construction adoptedDecided for petitioner

    “data” means “mono or stereo audio files created from independent, isolated locally generated audio files, such files suitable for creation of a multi-track audio file.” 230 PO Resp. 9−10 (citing Ex. 2140 ¶¶ 131, 134). This argument is unsupported by the claim language or specification. The claim does not require the creation of audio files, much less a “multi-track audio file.” The specification describes storing audio files in memory without the specificity that Patent Owner urges we adopt. See 230 IPR, Ex. 1001, 13:1−14. Accordingly, we are not persuaded by Patent Owner’s proposed construction of “local audio data.” Rather, we understand “audio data” to have a plain and ordinary meaning, such as the one given to the term by the District Court in the underlying litigation. 230 IPR, Ex. 1037, 10. We adopt the District Court’s construction of “audio data” to mean “data comprising audio signals in digital form.” Id. This finds support in the specification as the audio is described as being converted into digital audio and stored in a file. See 230 IPR, Ex. 1001, 13:1−14. Our conclusion is consistent with the plain and ordinary meaning of the term as that would be understood by a person of ordinary skill in the art, and we see no reason to deviate from the conclusions of the District Court on this point.” slip op. at 21

  • ExcludeMotion to exclude, deniedDenied

    “irrelevant under Federal Rules of Evidence 401–403. Patent Owner asserts that Petitioner has failed to establish that these documents reflect the understanding of a person of ordinary skill in the art, or that they are consumer-oriented documents, but not technical references or sources for understanding the meaning of claim terms. 230 IPR, Paper 64, 3−4. According to Patent Owner, these exhibits lack a “technical foundation” that establishes the technical meaning of a claim term. Id. We do not agree with Patent Owner as it conflates relevance with sufficiency of evidence to prove a contention on claim construction. Dictionary definitions are often useful when determining a claim term’s plain and ordinary meaning in the context of the specification, and as such are relevant when claim terms are disputed. Phillips, 415 F.3d at 1312. Furthermore, the evidence of record shows testimony as to whether the “Sweetwater” glossary entry for “body pack” would be relevant to the meaning of the term in the “world of wireless performance.” 230 IPR, Paper 67, 4 (citing Ex. 1073 ¶ 42). Patent Owner’s objections are overruled as to relevance.” slip op. at 116

  • BurdenFwd all claims patentableNot shown unpatentable

    “after a full and fair hearing, we determine that Petitioner has not demonstrated by a preponderance of the evidence that any of the challenged claims are unpatentable.” slip op. at 125

  Patent outcomesUS 7,711,443 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 7,711,443
• Abbott Laboratories v. Miracor Medical SANo claims unpatentable
  PTAB · Jun 11, 2026 · IPR2025-00116 · APJ John D Hamann · IPR · Final written decision

  The Board held claims 1–5, 7, 10, 16–24, 26, and 28 not unpatentable under any of the four § 103 grounds because the petition failed to prove required limitations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We find that the ’077 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of skill reflected in these references and in the ’077 patent is consistent with the definition of one of ordinary skill in the art proposed by Petitioner, which we adopt. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We further find that our determinations in this Decision would be the same if we were to instead adopt the level of skill proposed by Patent Owner.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We agree with Patent Owner that “axially adjacent” should be given its plain and ordinary meaning of “adjacent to one another as measured along a central axis.” PO Resp. 5–6; see also Ex. 2015 ¶¶ 73–79 (Mr. Leschinsky addressing the claim term “axially adjacent” and explaining that a person of ordinary skill would have understood it to mean that the “first magnetic device and the rotor are ‘adjacent’ to one another, i.e., disposed next to one another, as measured along the central axis about which the rotor spins”). Patent Owner’s construction also is supported by Petitioner’s expert, Mr. Crosby, who agrees that “adjacent to one another as measured along a central axis,” could be “one meaning,” along with “many other meanings.” Ex. 2014,8 19:13–20:11. In sum, consistent with our Institution Decision, we conclude that the plain and ordinary meaning of “axially adjacent” is “at a position adjacent to one another as measured along a central axis.” See Dec. on Inst. 12.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Second, for the reasons below, we determine that we do not need to construe any other claim terms to resolve the disputes between the parties. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (“[W]e need only construe” slip op. at 14

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We agree with Patent Owner. As we discuss above, we find “axially adjacent” to mean “adjacent to one another as measured along a central arguments that rest on Petitioner’s assertion that in the Parallel Litigation, Patent Owner “asserts that a magnetic element sealed within a rotor is . . . ‘axially adjacent.’” Id. at 20–21, n.6 (citing Ex. 1019, 5–7). In particular, we find unavailing Petitioner’s argument that Wampler teaches that magnetic pieces 88 (“a first magnetic device”) “are inserted [‘axially adjacent’] in…the impeller.” Id. at 20–21 (citing Ex. 1008 ¶ 80, Fig. 13; Ex. 1003 ¶ 174). We also find unavailing Petitioner’s reliance on Wampler’s Figure 13 and Mr. Crosby’s cited testimony that “the ‘impeller’ and ‘magnetic pieces’ are axially adjacent—situated next to each other on the same axis.” Id. at 21–22 (annotating Ex. 1008, Fig. 13; citing Ex. 1003 ¶¶ 174–176). Petitioner does not sufficiently explain this argument, but appears to conflate being adjacent along a central axis with about an axis. Id. We also find unavailing Petitioner’s argument that under Patent Owner’s construction, Wampler also teaches this limitation, because Patent Owner “concedes that ‘axially adjacent’ components ‘have positioning that is next to one another, perhaps touching or sharing a common side, when measured along the axis.’” Pet. Reply 14–15 (citing PO Resp. 14). Petitioner mischaracterizes Patent Owner’s arguments and ignores Patent Owner’s showing that “axially adjacent” components are “distinct from components that are aligned with one another such that they overlap or occupy the same portion of an axis upon which they are positioned.” PO Resp. 14 (citing Ex. 2015 ¶ 78). For the preceding reasons, Petitioner fails to show by a” slip op. at 24

  Patent outcomesUS 11,754,077 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,754,077
• Abbott Laboratories v. Miracor Medical SASome claims unpatentable
  PTAB · Jun 10, 2026 · IPR2025-00114 · APJ Annette R Reimers · IPR · Final written decision

  Claims 1, 2, 4, 5, 7, 8, 11, 12, 14–16, 18, and 19 are unpatentable under §103; claim 20 was not shown unpatentable.

  RulingsFinal written decision

  • Expert testimonyDenied

    “IV. PATENT OWNER’S MOTION TO EXCLUDE Patent Owner seeks to exclude portions of Dr. Wieselthaler’s Declaration (Exhibit 1041), portions of Mr. Crosby’s Reply Declaration (Exhibit 1042), portions of the deposition transcript of Dr. Wieselthaler (Exhibit 2028), and the exhibits “upon which that testimony is based” (Exhibits 1015, 1038, 1044, 1046, 1049, and 1050). Mot. 1. According to Patent Owner, the Motion was made “to preserve objections previously made in the record.” Id. (citations omitted). Patent Owner did not timely move to strike any of the evidence at issue as being outside the scope of reply evidence. Patent Owner asserts that because an inter partes review must be based on prior art consisting of patents or printed publications (citing 35 U.S.C. § 311(b)), the testimony of Mr. Crosby and Dr. Wieselthaler concerning “various physical devices allegedly known” to a person of ordinary skill in the art is inadmissible, along with all of the exhibits (consisting of printed materials such a journal abstracts, press releases, and papers) related to those physical devices. Id. at 3–4; see also Mot. Reply 1–4 (arguing that “devices that Petitioner’s witnesses assert were the basis of an inter partes review”). According to Patent Owner, Dr. Wieselthaler was unable to “link two of these physical devices to the printed prior art asserted in this [inter partes review], but those attempts fell apart during his cross examination.” Id. at 4. Patent Owner further reasons that because the evidence “cannot be the basis” of an inter partes review, it “has no tendency to make any fact of consequence in this trial more or less probable,” “is irrelevant and not admissible,” “presents substantial danger of confusing the issues, causing undue delay, and wasting time in this trial,” and “are not ‘based on sufficient facts[,] the product of reliable principles and methods[, or] ‘a reliable application of the principles and methods to the facts of the case.’” Id. at 7 (citing Fed. R. Evid. 401–403, 702) (modification in original). With regard to Exhibits 1015, 1038, 1044, 1046, 1049, and 1050, Petitioner argues, and we agree, that Patent Owner identifies no plausible legal theory for their inadmissibility based on the contention that they discuss physical devices. See Mot. Resp. 3. We also agree with Petitioner that the exhibits are not “the basis for any ground” asserted in this proceeding, and may be properly relied upon by Dr. Wieselthaler and Mr. Crosby as support for their rebuttal testimony directed to Patent Owner’s arguments disputing Petitioner’s asserted motivation to combine the prior art relied upon in the instituted grounds. See id. at 3–4. In regard to the disputed testimony of Dr. Wieselthaler and” slip op. at 77

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther

    “1. “magneto coupling” Claim 1 recites, in relevant part, “a second magnetic device . . . positioned to magnetically drive rotation of the magnetically driven rotor via a magneto coupling with the first magnetic device.” Ex. 1001, 5:34–37. Claim 11 recites, in relevant part, “the second magnetic device positioned axially closer to the first magnetic device than to the magnetically driven rotor so as to magnetically drive rotation of the magnetically driven rotor relative to the one or more walls via a magneto coupling with the first magnetic device.” Id. at 6:42–48. Petitioner argues that “magneto coupling” means “a transfer of torque from one rotating permanent magnetic component to another rotating permanent magnetic component via a magnetic field.” Pet. 8–9 (citing Ex. 1003 ¶¶ 68–87). According to Petitioner, this construction is consistent with the ’879 patent, which describes “a coupling between two rotating ‘bar magnets’—a drive wheel rotates one bar magnet which causes another bar magnet (connected to a rotor) to rotate.” Id. (citing Ex. 1003 ¶¶ 54–55 (analyzing Ex. 1001, 2:28–52, 4:44–64, Fig. 2)). Patent Owner argues that “magneto coupling” should be afforded “its plain and ordinary meaning, which would encompass a magnetic coupling through both rotating magnets and the use of a rotating magnetic Owner directs us to the testimony of Mr. Leschinsky, who explains that a person of ordinary skill in the art would have understood the ’879 patent to use “magneto coupling” to generally describe “a way to couple the rotor to a drive element while sealing the two from one another and avoiding use of a direct mechanical coupling.” Ex. 2015 ¶ 67. According to Patent Owner, “Petitioner provides no recognizable basis for limiting the plain meaning of magnetic coupling to one type of magnet and excluding another type of magnet.” PO Resp. 6–7 (citing Johnson Worldwide Associates, Inc., v. Zebco Corp., 175 F.3d 985, 989–992 (Fed. Cir. 1999)). We agree with Patent Owner that Petitioner does not provide a sufficient basis for limiting the plain meaning of “magneto coupling.” That the ’879 patent describes embodiments using bar magnets does not serve to require the use of permanent magnets for the recited “magneto coupling.” See Sisvel Int’l S.A. v. Sierra Wireless, Inc., 81 F.4th 1231, 1236 (Fed. Cir. 2023) (quoting Phillips, 415 F.3d at 1323 (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”)). Moreover, the claim language here is not so limited. 13 Patent Owner notes that Petitioner’s grounds of unpatentability based on Wampler and Bourque depend on the disclosure only of electromagnetic drives in each reference, implying that “Petitioner does not believe its own proposed narrower construction.” PO Resp. 6; see also Pet. 8 (Petitioner alleging that in the Parallel Proceeding Patent Owner “conflates ‘magneto coupling’ . . . with a stator drive using a stationary electromagnet, instead of a rotating magnet, to rotate the rotor magnet,” and asserting that as the basis for Petitioner’s reliance on Wampler and Bourque as teaching a “magneto coupling” in this proceeding (citing Ex. 1019, 7; Ex. 1003 ¶¶ 84–87)).” slip op. at 24

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableUnpatentable

    “reasons discussed above. See supra Section III.D.3. Accordingly, because Petitioner’s contentions are premised on an unsupported claim construction that we reject, Petitioner fails to show how Wampler teaches or suggests “a magnetically driven rotor . . . axially adjacent to a first magnet device,” as required by claims 1 and 11, as well as by claims 2, 4, 5, 7, 8, 11, 12, 14– 16, and 18–20, which depend from either claim 1 or claim 11. In its Reply, Petitioner suggests that “[u]nder [Patent Owner’s] construction from the [Patent Owner Response], Wampler also teaches or suggests this limitation,” because Patent Owner “concedes [that] ‘axially adjacent’ components ‘have” slip op. at 36

  Patent outcomesUS 11,572,879 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,572,879
• Stingray Group Inc. / Stingray Music USA, Inc. v. Edwin A. Hernandez-MondragonSome claims unpatentable
  PTAB · Jun 10, 2026 · IPR2025-00350 · APJ Jason M Repko · IPR · Final written decision

  Claims 7–12 were held unpatentable over Wannamaker alone or with Avellan; claims 1–6 and 13 were not shown unpatentable because Avellan did not teach the claimed screen-capture sequence and assembly.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for petitioner

    “Patent Owner submits a similar definition and does not take issue with the Petition’s characterization of the level of ordinary skill in the art. PO Resp. 17. We determine that no express finding is necessary and that the level of ordinary skill in the art is reflected by the prior art of record. Any perceived difference in how each party characterizes a POSITA’s education, knowledge, and work experience does not change our analysis or conclusions.” slip op. at 5

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither party has offered any claim construction arguments, relying on ordinary and customary meaning. Pet. 19–20; PO Resp. 18. We determine that construction of claim terms is not necessary to resolve the disputes raised by the parties in this proceeding.” slip op. at 5

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “Yet paragraph 122 of Mr. Lipoff’s declaration merely repeats the Petition’s argument almost verbatim. Compare Ex. 1007 ¶ 122, with Pet. 28. Mr. Lipoff does not add any citation to Avellan or any other source that supports his testimony. See Ex. 1007 ¶ 122. Nor does Mr. Lipoff offer any additional technical reasoning than what is stated in the Petition. Testimony may be entitled to little weight if it merely restates the petition’s unsupported, conclusory assertions without adding supporting evidence or technical reasoning. Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). That is the case here.” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We are persuaded by Patent Owner’s argument that claim 1 is not obvious over Avellan because it does not assemble a media stream of multimedia items using the recited screen captures. See PO Resp. 21–23. We agree with Patent Owner that the plain language of the claim requires more than transmitting individual media items. PO Sur-reply 20. To the extent that Avellan captures images, those images do not meet the claimed requirements for a “temporal sequence of screen captures” in the independent claims, which must (1) be of the web page rendered by a browser, (2) “define all the content of the web page at a given time,” (3) “illustrate a dynamic change of at least a portion of the content over time” when two of them are compared, and (4) used to assemble “the at least one media stream.” Rather, the record better supports Patent Owner’s argument that Avellan transmits the multimedia items separate from any media stream assembled from screen captures. PO Resp. 21–23; PO Sur-reply 20.” slip op. at 7

  Patent outcomesUS 10,524,002 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR
  Patents in suitUS 10,524,002
• Imperative Care, Inc. v. Inari Medical, Inc.All claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00289 · APJ Timothy G Majors · IPR · Final written decision

  Claims 1–15 are unpatentable: claims 1–15 under Grounds 2 and 3, and claim 10 under Ground 4; Ground 1 did not establish unpatentability.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We have construed the “filament” term in multiple related proceedings and agreed with Patent Owner that the claimed filament requires flexibility. See Ex. 1050 (Final Written Decision in 156 IPR); IPR2024-01157, Paper 35 (Final Written Decision) at 15–24. Specifically, we determined that the evidence supports Patent Owner’s position that “a POSA would have understood the plain and ordinary meaning of the claimed ‘filament’ as a flexible length of material (e.g., one or more string(s), wire(s), tape(s)).” See, e.g., Ex. 1050, 23. We maintain that construction in this Decision for the reasons given by Patent Owner (see PO Resp. 24–32; PO Sur-reply 6–8), we disagree with Petitioner’s argument to the contrary (Pet. Reply 27–31), and we incorporate our analysis concerning the meaning of the filament term from the related proceedings identified above, which applies equally here.13 Ex. 1050 (Final Written Decision in 156 IPR); IPR2024-01157, Paper 35 (Final Written Decision) at 15–24. The parties agreed at the oral hearing that there is no additional argument or evidence 13 Although the ’005 patent is not directly related to the patents at issue in the 1157 and 156 IPRs, the ’519 Application that the ’005 patent purports to incorporate for providing all relevant disclosures about the filament term is a parent application to the challenged patents in the 1157 and 156 IPRs (see supra n.3). SightSound Techs., LLC v. Apple Inc., 809 F.3d 1307, 1316 (Fed. Cir. 2015) (“Where multiple patents derive from the same parent application and share many common terms, we must interpret the claims consistently across all asserted patents.”) (internal quotation marks omitted). We also construed the filament term consistently in other ongoing proceedings on related patents. See, e.g., Ex. 1045 (Institution Decision in the 728 IPR), 12–18; Ex. 1046 (Institution Decision in the 989 IPR), 13–21. already addressed in those related matters. Tr. 6:13–23, 23:19–26.” slip op. at 16

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner contends that the person of ordinary skill in the art (“POSA”) in August 2018 “would have had an undergraduate degree in mechanical engineering or a related engineering discipline and 2–4 years of catheter design experience.” Pet. 17 (citing Ex. 1003 ¶ 35). Although Patent Owner states that it “disagrees” with Petitioner’s POSA definition, Patent Owner nevertheless applies that definition in this case. PO Resp. 32–33; see Tr. 22:23–23:5 (Patent Owner is “not disputing” Petitioner’s definition, asserting the definition “doesn’t make any difference in this case”).” slip op. at 13

  • Expert testimonyPatent owner expert creditedPetitioner expert creditedMixed

    “We credit Dr. Zalesky’s interpretation of Schaffer on whether the POSA would have understood Schaffer as describing rigid actuating members. Dr. Zalesky testifies, for example, that a POSA would have understood from Schaffer’s disclosures about the actuating members being “machined” from metal or plastic, that such actuating members would be rigid. Ex. 2026 ¶ 101 (explaining “machining is a manufacturing process in which the desired part . . . is created using the controlled removal of bulk material” to produce a “rigid material”); Ex. 1005 ¶ 82 (“The actuating member 55 and the actuating button 261 is machined from aluminum” and “[i]n another example, the actuating member 55 and the actuating button 261 are machined from plastic”); Ex. 2026 ¶¶ 102–103 (testifying the disclosed valve assembly technique in Schaffer (Ex. 1005 ¶ 83) also indicates that “rigid” actuating members are used). Mr. Thornton opines (without citation to any persuasive supporting disclosure) that a POSA “would have understood that Schaffer’s U-shaped actuating members would have preferably been formed from a thin, flexible material.” Ex. 1003 ¶ 113. But, at deposition, Mr. Thornton conceded that machined plastics and aluminum, like disclosed in Schaffer, are rigid. Ex. 2005, 168:2–6 (“Q. And you said that plastic that would be machined would be rigid, correct? A. I think that’s a fair statement.”). Although Mr. Thornton opines that Schaffer’s actuating members would “preferably”” slip op. at 29

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableUnpatentableMixed

    “For the reasons above, Petitioner has not established that the claimed “filament” is disclosed in the combination of Garrison and Schaffer and, thus, Petitioner has not shown by a preponderance of the evidence that claim 1 would have been obvious over Garrison and Schaffer. Petitioner’s challenge to independent claim 10 (and the claims that depend from claim 1 and claim 10) fails for similar reasons. Each of the challenged claims requires a “filament” and, given our construction of that term and our findings above that Schaffer does not teach or suggest the claimed filament, Petitioner has not proved by a preponderance of the” slip op. at 31

  Patent outcomesUS 11,554,005 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,554,005
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00189 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claim 19 is unpatentable as obvious over Kim and over Nam; the challenge based on Lee and Park fails for lack of a reasonable expectation of success.

  RulingsFinal written decision

  • Adverse judgmentAdverse judgmentOther

    “B. Patent Owner’s Disclaimer of Claims 17 and 20 As indicated above, Patent Owner filed a statutory disclaimer of claims 17 and 20 of the ’666 patent. See Ex. 2005. In view of Patent Owner’s statutory disclaimer, we treat claims 17 and 20 as having never been part of the ’666 patent. See Vectra Fitness, Inc. v. TNWK Corp., ‘considered as part of the original patent’ in [35 U.S.C.] § 253 to mean that the patent is treated as though the disclaimed claims never existed.”). Because inter partes review cannot be instituted based on disclaimed claims, we do not consider claims 17 and 20 to be within the scope of this proceeding. 37 C.F.R. § 42.107(e) (“No inter partes review will be instituted based on disclaimed claims.”); General Elec. Co. v. United Techs. Corp., IPR2017-00491, Paper 9 (PTAB July 6, 2017) (precedential) (denying institution in view of a statutory disclaimer of all the challenged claims). Thus, we confine our analysis in this Decision to claim 19, the challenged claim that has not been disclaimed.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA”) “would have had a bachelor’s degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) 3D memory devices, or an equivalent level of skill, knowledge and experience (e.g., an advanced degree may substitute for professional experience).” Pet. 24–25 (citing Ex. 1003 ¶¶ 34–37). Petitioner further contends that the “POSITA would also have been aware of and generally knowledgeable about 3D memory’s structure, its component parts, and how it operates.” Id. at 25 (citing Ex. 1003 ¶¶ 34–37).” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “evidence from the complete record now before us, we determine that the claim term “curved side surface” encompasses any outer surface of the structure with curvature. See Hamilton Beach Brands, Inc. v. F’real Foods, LLC, 908 F.3d 1328, 1338–1339 (Fed. Cir. 2018) (finding that it is acceptable for the Board to adopt its own claim construction where the parties “had notice of the contested claim construction and an opportunity to be heard”). We do not adopt Patent Owner’s position that “curved side surface” requires the side surface to be curved along a direction perpendicular to the top surface of the structure (e.g., the z-axis).” slip op. at 12

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “curved side surface” are premised on its proposed claim construction which, as set forth above, we decline to adopt. Instead, we determined that “curved side surface” as used in the challenged claim encompasses any outer surface of the structure with curvature, which does not need to be curved in any specific direction. See § II.B.1, supra. Kim states: Embodiments of the inventive concepts in which the protrusion pad PAD_P has a rectangular parallel[] shape is illustrated, but the protrusion pad PAD_P is not limited thereto and, in some embodiments, may have a shape including a curved surface based on a virtual rectangular parallel[] shape, a cylindrical shape, or any shape. Ex. 1005, 8:29–34 (emphases added). Dr. Lee testifies that “[a] POSITA would have recognized that this includes configurations where the sides of the protrusion pads are curved, particularly to optimize electrical connectivity and mitigate stress at material interfaces.” Ex. 1003 ¶ 201. Dr. Lee further testifies that a POSITA would have understood Kim’s disclosure “teaches a variety of different protrusion pad PAD_P shapes” including “pads with curved sides when viewed in cross-section or pads with curved sides when viewed from above.” Id. ¶ 202. Accordingly, we determine that Kim discloses a cylindrically-shaped PAD_P that has a “curved side surface” as required by the challenged claim. slip op. at 24

  Patent outcomesUS 11,145,666 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 11,145,666
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

  The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

  • BurdenNot shown unpatentable

    “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artOther

    “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

  Patent outcomesUS 9,421,713 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,421,713
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00311 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1, 3–11, and 17–22 are unpatentable as obvious over grounds using Mazumder and Mori; grounds relying on Henke fail because Henke is not analogous art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printers including remote control of rapid fabrication systems.” Pet. 6 (citing Ex. 1003 ¶¶ 40–42). Petitioner also argues that “[a]dditional years of experience could substitute for an advanced-level degree (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” PO Resp. 11–12. Neither party explains why the outcome of this case would be affected by the adoption of either of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “There is also evidence that supports Petitioner’s proposed construction, under which a user interface may display both the image and the projection if it displays them at different times. This evidence includes statements in the specification that describe displaying an image “instead” of “a rendering of a three-dimensional model” and that describe displaying a “video image and/or model projection” rather than merely a video image and a model projection. Ex. 1001, 22:43–53, 24:52–55, Figs. 5, 7. It also includes arguments in the prosecution history distinguishing Taminger on the basis of failure of disclose any display of both an image and a projection at all, rather than on the basis of failure to disclose simultaneous display of both visualizations. Ex. 1002, 160, 161. Based on our review of all the probative evidence, we find that the preponderance of the evidence supports Petitioner’s view, so we construe the challenged claims as not requiring simultaneous display of the image and the projection.” slip op. at 15

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “With the problem solved by the ’324 patent defined as monitoring automated three-dimensional fabrication processes, we find that Mori is at least reasonably pertinent to the problem. Mori discloses “[a] machining status monitoring apparatus.” Ex. 1005, code (57), ¶ 43. That apparatus uses “actual CCD cameras . . . to image the workpiece.” Id. ¶ 49. It also has a “virtual image generating section” with “virtual CCD cameras” having “view points” that “match the view points of the actual CCD cameras.” Id. ¶¶ 59, 61, 62. This disclosure relates quite closely to monitoring an automated three-dimensional fabrication process and thus is at least reasonably pertinent to solving that problem. d) Conclusion For the reasons discussed above, Mori is both in the same field as the ’324 patent and at least reasonably pertinent to the problem solved by the ’324 patent. Accordingly, it is analogous art to the ’324 patent.” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Regarding combining the teachings of Mazumder with those of Mori, the evidence of record shows that the print head of Mazumder’s three-dimensional printer could obscure portions of the actual camera’s view of the object being printed and that displaying Mori’s virtual image of the object in addition to Mazumder’s actual image of the object “would have allowed the user to of the remote computer to monitor the progress of the object even when the actual view of the object is partially or totally obscured.” Ex. 1003 ¶ 86. c) Conclusion Regarding Claim 1 For the reasons discussed above, the preponderance of the evidence shows that claim 1 would have been obvious over the combination of Mazumder and Mori.” slip op. at 26

  Patent outcomesUS 8,562,324 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,562,324
• X Corp. v. Sterling Computers CorporationAll claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00299 · APJ Bach V Hoang · IPR · Final written decision

  Claims 1–22 are unpatentable as obvious over the stated Dumais-based and Kircher/Krug grounds; Patent Owner’s and Petitioner’s motions to exclude are dismissed as moot.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Our Institution Decision adopted Petitioner’s definition of a person of ordinary skill in the art. Inst. Dec. 8–9. In its response, Patent Owner adopts Petitioner’s proposed level of ordinary skill. See PO Resp. 14–15 (“Patent Owner and its expert adopt the Board’s definition for purposes of this Response”). Having considered the record, we continue to adopt Petitioner’s proposed level of skill, as articulated above. We are satisfied that Petitioner’s proposal comports with the level of skill necessary to understand and implement the teachings of the ’217 Patent. Accord Inst. Dec. 8–9.” slip op. at 9

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)No construction neededNot reached

    “1. “computer program modules” The parties dispute whether four “computer program modules comprising” (1) “a monitoring module,” (2) “a first relevance measurement module,” (3) “a second relevance measurement module,” and (4) “a relevance analysis module” (collectively, “module limitations”) invoke 35 U.S.C. § 112 ¶ 6 and should be treated as means-plus-function limitations. See Pet. 8–18; PO Resp. 15–18; Pet. Reply 3–5; PO Sur-reply 4–7. However, the parties do not argue that the construction of these terms affects the analysis of Petitioner’s challenges. See PO Resp.; Pet. Reply; PO Sur-reply. Moreover, our analysis does not rely on any particular construction of these terms and, so, we need not resolve this dispute.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “2. “one or more measures derived from the group consistent of” Petitioner asserts limitations 1[g] and 1[g][i]–1[g][iv] recite an open Markush group listing alternatively useable members. Pet. 20–21 (citing Gillette Co. v. Energizer Holdings, Inc., 405 F.3d 1367, 1372 (Fed. Cir. 2005); Abbot Lab’ys v. Baxter Pharm. Prod., Inc., 334 F.3d 1274, 1281 (Fed. Cir. 2003) (explaining that the listing of specified alternatives within a claim is referred to as a Markush group or Markush grouping)); See Ex. 1001, 47:47–58. Patent Owner does not dispute Petitioner’s construction. See PO Resp; PO Sur-reply. As these terms are not in controversy, we need not opine on this construction.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITANo construction neededNot reached

    “Petitioner’s and Patent Owner’s respective constructions overlap in their requirement that “cognate” users share similar past user actions and assessments or are defined by similar direct input by the user. See Pet. 18; PO Resp. 20–21; PO Sur-reply 10. Petitioner argues that Patent Owner’s construction “exclude[s] ‘groups’ from the claims” and further limits the scope of to users who share actions (Pet. Reply 8–9), but Patent Owner states that its proposed construction does not so limit the claims (PO Sur-reply 10). As such, there is no disagreement that “cognate” users share similar past user actions and assessments or are defined by similar direct input by the user. As there is no controversy, we need not, and do not, construe the meaning of “cognate.” However, Patent Owner’s requirement that “at least one other of the plurality of users” is specifically cognate to “the user” who was sent the content is plainly recited in the claim language itself. The claim recites a “relevance score of a piece of electronic content sent from a sender to a user” in the preamble and similarly again in limitation 1[g]. See Ex. 1001, 47:25–28 (emphasis added), 45:62–64. The limitation in question directly references the claimed “user” when reciting the cognate relationship: “identify at least one other of the plurality of users . . . that is cognate to the user.” Ex. 1001, 47:43–45 (emphasis added). As such, the claim language plainly supports Patent Owner’s requirement and Petitioner does not contest that requirement. See Pet. Reply 8. least one other of the plurality of users . . . that is cognate to the user” as requiring that the identified other user is cognate specifically to the user whose relevance score is being determined.” slip op. at 12

  Patent outcomesUS 7,716,217 unpatentable
  Claim construction§ 103 obviousnesscites KSR
  Patents in suitUS 7,716,217

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.