- CQV Co., Ltd. v. Merck Patent GmbHNo claims unpatentablePTAB · Oct 14, 2025 · PGR2021-00054 · APJ Kristina M Kalan · PGR · Remand
Claims 1–22 were not shown unpatentable because Sample C was not proven publicly available as prior art, and the original decision found the remaining grounds insufficient.
RulingsRemand decision- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable
“We agree with Patent Owner that Petitioner’s evidence in Kuntz (Ex. 1026), the Annual Report (Ex. 1028), Masuko (Ex. 1029), and Pfaff (Ex. 1034) is insufficient to show that Xirallic® Sample C was available to the public before the effective filing date of the ’861 patent. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26. Kuntz, the Annual Report, Masuko, and Pfaff may support a finding that the Xirallic® line of products was available to the public, but these documents do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public. We also agree with Patent Owner that the Technical Data Sheets (Exs. 1005–1010), Certificates of Analysis (Exs. 1011–1017), and Material Safety Data Sheet (Ex. 1025) are insufficient to show that Xirallic® Sample C was available to the public. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26–27. Regardless of how the Technical Data Sheets were used in the Opposition against the European counterpart of the ’861 patent (Exs. 1040, 1041) and during the prosecution of the application from which the ’861 patent issued (Ex. 1003, 102–104), the Technical Data Sheets do not refer to or describe the lot of Xirallic® from which Sample C was taken. Moreover, as noted by Patent Owner, the Technical Data Sheets (Exs. 1005–1010) indicate that they are “preliminary” and Petitioner has not provided any evidence that the Technical Data Sheets were ever issued to the public, as opposed to just issued internally. See PO Resp. 18–19. We also find persuasive Patent Owner’s argument that the Technical Data Sheets are preliminary because other, later-dated technical data sheets (Exs. 2012, 2013) lack the “preliminary” label and list characteristics that are different from those in Exhibits 1005–1010. See PO Resp. 19 (comparing, e.g., Ex. 1009 and Ex. 2013; Ex. 1005 and Ex. 2012). The Technical Data Sheets may support a finding that the Xirallic® products they describe existed as of the dates on the documents, but they do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public.” slip op. at 20
- Expert testimonyPetitioner expert discountedPatent owner expert creditedOther
“witnesses. See Elbit Systems of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1358 (Fed. Cir. 2018) (citing Trs. of Columbia Univ. v. Illumina, Inc., 620 F. App’x 916, 922 (Fed. Cir. 2015); Inwood Labs., Inc. v. Ives Labs., Inc., 456 U.S. 844, 856 (1982)). We have reviewed the witness testimony in the record and, more particularly, Mr. Choi’s deposition answers regarding Petitioner’s purchase of the lot of Xirallic® from which Sample C came. We find that Mr. Choi’s responses cast doubt on the credibility of his declaration testimony, namely with regard to the public availability of Sample C. Mr. Choi represented that he was involved in the purchase of the lot of Xirallic® from which Sample C was taken. Ex. 2011, 48:1–23. Mr. Choi stated that he instructed Petitioner’s marketing team manager to buy the sample from a distributor of Patent Owner’s products located in Europe. Id. at 48:24–49:4. Mr. Choi stated that he has evidence of the transaction, but refused to reveal the name of the company from which Petitioner purportedly purchased the lot of Xirallic® (id. at 49:5–50:3) and refused to produce an email in his possession that would corroborate his testimony regarding Petitioner’s acquisition of the product (id. at 50:8–16, 51:10–23). Mr. Choi represented that he does not remember how much Petitioner paid for Sample B. Id. at 56:4–5. Mr. Choi admitted that the entity from which Petitioner acquired the lot of Xirallic® from which Sample C was taken is “not currently a Merck distributor” (Ex. 2011, 50:4–7) and was not “a Merck distributor at the time” that “samples B and C were purchased” (id. at 51:25–52:2). According to Mr. Choi, the company is a “former distributor” of Patent Owner’s products. Id. at 52:3–6. Mr. Choi did not know, according to his testimony, when that unnamed entity first obtained the lot of Xirallic® (id. at 52:7–10) and he stated that he did not have personal knowledge of how the entity obtained the lot of Xirallic® (id. at 52:12–19). Instead, Mr. Choi assumed the entity was “able to obtain the sample through the routine course or process” the entity uses “to take samples or get samples.” Id. at 52:12–19. Mr. Choi believed the sample of Xirallic® from which Sample C was taken was sealed when Petitioner received it because samples from dealers are sealed, and he remembered observing that the package was from a dealer. Id. at 52:24– 54:25. However, Mr. Choi admitted that he did not obtain a technical data sheet or certificate of analysis for the lot of Xirallic® from which Samples B and C were taken. Id. at 59:6–11. Mr. Choi also answered questions regarding Petitioner’s purchase of Samples D and H. Ex. 2011, 62:20–66:8, 67:7–9, 73:12–13, 73:17–22. Similar to his testimony regarding Samples B and C, Mr. Choi admitted withholding an email regarding the purchase of the lot of Xirallic® from which Sample D was taken. Id. at 62:20–63:9. Mr. Choi also admitted that he did not know how Akzo USA or Axalta obtained the Xirallic® the companies sold to him, and admitted that Akzo USA was not a distributor of Patent Owner’s products at the time Petitioner purchased the product. Id. at 63:10–66:8, 73:17–22. Mr. Choi also admitted that Petitioner did not pay Akzo USA for the lot of Xirallic® from which Sample D was taken, and did not pay Axalta for the lot of Xirallic® from which Sample H was taken. Id. at 67:7–9, 73:12–13. Although Petitioner presents declaration testimony from Mr. Choi representing that he purchased the lot of Xirallic® from which Samples B and C were taken in October 2011 (Ex. 1004 ¶ 16), Mr. Choi’s declaration testimony lacks corroborating evidence, and his deposition testimony does not support that the product was available to the public, as we found in our Final Written Decision. See Final Dec. 27–28. Notably, Petitioner produced corroborating evidence for Mr. Choi’s acquisition of Samples A, H, and I. See Ex. 1004 ¶¶ 13 (citing Ex. 1047), 18 (citing Exs. 1024, 1025). However, Mr. Choi withheld similar evidence for the Xirallic® lots from which Samples B, C, and D were taken. See Ex. 2011, 50:8–16, 51:10–23, 62:20– 63:9; Final Dec. 28. As Patent Owner argues, there is “no information to determine when a contract was established, that there was consideration for the exchange, that the product was available to be delivered when the alleged transaction took place, or even when the product was delivered. Choi has no memory of what was paid for the product.” Sur-Reply 24–25; see also PO Resp. 13–14; PO Br. Rem. 2–4.” slip op. at 34
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Based on the evidence discussed above, we are not persuaded that Petitioner has shown by a preponderance of the evidence that Sample C was available to the public. Regardless of whether a company avoids wasting shelf life of its products (Ex. 1004 ¶¶ 15–16), there is no persuasive evidence in the record showing that the lot of Xirallic® from which Sample C was taken was released from quality control and then made available to the public by Patent Owner. Mr. Choi’s testimony shows that Petitioner obtained the lot of Xirallic® from which Sample C was taken in an atypical manner (i.e., not from Patent Owner or one of Patent Owner’s current distributors) (Ex. 2011, 49:5–50:7, 50:8–16, 51:10–23, 51:25–52:6, 52:12– 19), and there is no evidence in the record to show that the lot of Xirallic® was intended for sale, rather than for experimental use only or for some other restricted use. Accordingly, we determine Petitioner has not demonstrated by a preponderance of the evidence that Sample C qualifies as prior art against the ’861 patent, and we determine that Petitioner has not shown by a preponderance of the evidence that the ’861 patent is unpatentable over the grounds relying on Sample C.” slip op. at 38
Patent outcomesUS 10,647,861 not shown unpatentable§ 102 anticipation§ 103 obviousnessPatents in suitUS 10,647,861 - Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationNo claims unpatentablePTAB · Mar 25, 2025 · IPR2023-01382 · APJ Kimberly Mcgraw · IPR · Final written decision
Claims 1–3 were not shown unpatentable under any of five § 103 grounds because Petitioner failed to establish sufficient motivation to modify or combine the prior art.
RulingsFinal written decision- BurdenNot shown unpatentable
“A petition must identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim.” 35 U.S.C. § 312(a)(3) Here, Petitioner merely provides general assertions about multiple references, without clearly identifying how, or why a POSITA would have been motivated, to modify the processes disclosed in those references to arrive at the claimed invention. Thus, the Petition does not state with particularity that Saxler’s particular technique for etching is to be used instead of Beach’s etching step when substituting Beach’s self-aligned process for Saxler’s two mask process. Nor does the Petitioner provide a sufficient reason, absent hindsight, why a POSITA would have been motivated to combine the references to result in a process that forms Saxler’s Modified Figure 1A. Thus, for these additional reasons, Petitioner has not shown by a preponderance of the evidence that claim 1 would have been obvious over Saxler, Beach, and Shenoy.” slip op. at 34
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Both parties agree that the differences between the definitions do not impact the analysis. Resp. 11; Reply 2. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’347 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’347 patent and the prior art. We also note that our Decision would be the same under either parties’ definition.” slip op. at 13
- Expert testimonyOther
“Petitioner’s expert, Dr. Shealy states that he understands paragraph 52 to mean that it is “fair game to pull the recess out of any of those figures [Figures 1A through 6].” Ex. 2004, 39:12–21. Dr. Shealy, however, also clarifies that “[a]s I said before, I think you could take all the embodiments and bring in which ones you want, depending on what you’re trying to accomplish.” Ex. 2004, 40:24–41:1. During the hearing, Petitioner admitted that Dr. Shealy’s “statement to modify the reference depending on what you're trying to accomplish” means that “a POSITA may modify with reason to do so. A POSITA would have removed Saxler’s recess to obtain the benefits of enhancement-mode.” Tr. 19:19–25. Again, the Petition does not provide a reason why a POSITA would have removed Saxler’s gate recess.” slip op. at 28
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“remove the recess in Saxler Figure 1A to arrive at the allegedly enhancement mode transistor of Modified Figure 1A. Contrary to Petitioner’s assertions in its Reply and at the hearing, the Petition makes no argument that a POSITA would have removed the recess from Saxler Figure 1A to realize the benefits of an enhancement mode transistor. See Reply 4–5; Pet. 24–68. Rather, the Petition merely asserts that a POSITA would have understood that the gate recess of Figure 1A is optional without providing any persuasive reason why a POSITA would have removed the gate recess but retained the sloped sidewalls of Figure 1A. Pet. 25, 40, 45. For example, Petitioner asserts that Saxler’s gate contact may be “recessed or non-recessed” and that when the gate recess shown in Figure 1A is not utilized, Saxler would have the structure of Saxler Modified Figure 1A. Pet. 25 (citing Ex. 1003 ¶ 81; Ex. 1007 ¶ 52, 66); see also Pet. 40, 45 (citing Ex. 1007 ¶ 52). Neither of these paragraphs provide sufficient motivation to a POSITA to remove the gate recess from Saxler Figure 1A. Saxler paragraph 52 states: Exemplary devices according to some embodiments of the present invention are schematically illustrated in FIGS. 1A through 6. Thus, while embodiments of the present invention are described herein with reference to a recessed gate structure or a non-recessed gate structure, other embodiments of the present invention may include or not include a gate recess. Accordingly, embodiments of the present invention should not be construed as limited to the particular exemplary embodiments described herein but may include any suitable structure having a cap layer and/or passivation layer as described herein. Ex. 1007 ¶ 52. Petitioner’s expert, Dr. Shealy states that he understands paragraph 52 to mean that it is “fair game to pull the recess out of any of those figures [Figures 1A through 6].” Ex. 2004, 39:12–21. Dr. Shealy, however, also clarifies that “[a]s I said before, I think you could take all the embodiments and bring in which ones you want, depending on what you’re trying to accomplish.” Ex. 2004, 40:24–41:1. During the hearing, Petitioner admitted that Dr. Shealy’s “statement to modify the reference depending on what you're trying to accomplish” means that “a POSITA may modify with reason to do so. A POSITA would have removed Saxler’s recess to obtain the benefits of enhancement-mode.” Tr. 19:19–25. Again, the Petition does not provide a reason why a POSITA would have removed Saxler’s gate recess.” slip op. at 28
Patent outcomesUS 9,748,347 not shown unpatentable§ 103 obviousnesscites Phillips · KSRPatents in suitUS 9,748,347 - Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationNo claims unpatentablePTAB · Mar 18, 2025 · IPR2023-01383 · APJ Kimberly Mcgraw · IPR · Final written decision
Claims 1–5 were not shown unpatentable because Petitioner did not sufficiently establish a reason to modify the asserted prior art.
RulingsFinal written decision- Expert testimonyPatent owner expert creditedDecided for patent owner
“We disagree with Petitioner’s argument because it fails to address Dr. Schubert’s academic and other experience with GaN transistors. Dr. Schubert is currently a tenured full professor in the Department of Electrical Computer, and Systems Engineering at Rensselaer Polytechnic Institute and was previously a tenured full professor in the Department of Electrical and Computer Engineering at Boston University. Ex. 2001, 129. Additionally, Dr. Schubert was the director of Boston University’s Semiconductor Devices Research Laboratory. Ex. 2001, 129. Dr. Schubert persuasively explains that his general expertise is in the field of electrical engineering and applied physics, including semiconductors, processing, and devices and his specific expertise is in the field of semiconductor materials (such as GaN), semiconductor devices, semiconductor integrated circuits, ohmic contacts, Schottky contacts, HEMTs, and optoelectronic devices such as light-emitting diodes (LEDs). Ex. 2001 ¶ 11, App’x A pp.129–137. His experience includes “the design, growth, fabrication, and testing of semiconductor devices as well as the employment of these devices in a variety of applications” and he is “familiar with both the design of such transistors [HEMTs] and the manufacturing processes used for FETs. Ex. 2001 ¶ 11, App’x A, pp. 129–137. He is an author or co-author of numerous text books and articles, and co-inventor of numerous patents, including those dealing with HEMT transistors and GaN devices. Ex. 2001 ¶ 13, App’x A, pp. 129–137. Petitioner fails to present any persuasive argument or evidence that Dr. Schubert’s extensive education and experience regarding GaN transistors is insufficient or lacking such that his testimony should be given little weight. Finally, we disagree with Petitioner’s additional argument that that its expert’s testimony (Dr. Shealy) should be given more weight than Patent Owner’s expert’s testimony (Dr. Schubert) because “[u]nlike Dr. Schubert, Dr. Shealy is one of the pioneer scientists in the field of GaN transistors.” Reply 34 (stating that Dr. Shealy’s research lab built the first GaN HEMT device on silicon in 1999 and citing Ex. 2002, 87:19–238). Obviousness is determined through the lens of a “person of ordinary skill in the art,” not through the lens of a person with extraordinary skill or a pioneer in the field. Given Dr. Schubert’s extensive relevant education and experience, Petitioner does not persuasively explain why Dr. Shealy’s testimony on any specific topic, or his testimony in general, should be given more weight than Dr. Schubert’s.” slip op. at 16
- Skill levelSkill level petitioner adoptedDecided for petitioner
“understanding of a person of ordinary skill in the art (sometimes abbreviated herein as “POSITA”). Graham, , 383 U.S. at 17–18. Petitioner argued that a person of ordinary skill in the art would have had a “at least a four-year degree in electrical engineering, chemical engineering, physics, or material science or a closely related field and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies. Additional education could substitute for professional experience and vice versa.” Pet. 11 (citing Ex 1003 ¶ 69). Patent Owner did not dispute this proposed definition prior to institution. See generally Prelim. Resp. In our Decision on Institution, we adopted Petitioner’s proposal. After institution, Patent Owner asserted a slightly different definition of a POSITA, namely someone who “would have possessed at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” Resp. 17. Relevant graduate education could substitute for the professional work experience. Id. Upon review of the full record, we see no reason to modify, and we thus maintain, the definition of a POSITA applied in our Decision on Institution. We also determine that our decision would be the same under either of the parties’ proposed definitions.” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Not reached
“During the proceeding, the parties also dispute the proper construction of “etching away the doped GaN layer, except a portion of the doped GaN layer beneath the gate contact” as recited in step [1e4] and provided briefing on this issue. Papers 35, 36, 37, 38. Because, as explained below, our determination rests upon Petitioner’s failure to show a sufficient reason to modify the asserted art, which is not dependent upon any particular claim construction, we need not, and do not, address these claim construction issues. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy).” slip op. at 13
- ExcludeDenied
“III. PETITIONER’S MOTION TO EXCLUDE EXHIBIT 2008 Petitioner filed a Motion to Exclude (Paper 25, “Mot.”) Exhibit 2008, which is a hearing transcript from the parallel ITC investigation. Mot. 1. Because we do not rely upon Exhibit 2008 in our Decision, we dismiss Petitioner’s motion as moot.” slip op. at 47
Patent outcomesUS 8,404,508 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,404,508 - Intel Corporation v. Besang Inc.No claims unpatentablePTAB · Dec 11, 2024 · IPR2023-00991 · APJ Jon B Tornquist · IPR · Final written decision
The Board held claims 1 and 13–17 not unpatentable, finding the asserted obviousness grounds deficient in claim limitations or motivation to combine.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“The parties proposed definitions differ in that Petitioner would permit a degree in “materials science” and require three years, as opposed to two years, of relevant experience. Compare Pet. 9 with PO Resp. 14. On this record, we adopt Patent Owner’s proposed definition, as it is more consistent with the prior art of record and the disclosures of the ’702 patent. We note, however, that neither party contends that the outcome of this case depends on the slight differences in the proposed definitions of a person of ordinary skill in the art.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate. Pet. 11–12. First, the plain language of the claim does not require merely a “layer” having a plurality of vertically oriented semiconductor memory cells, but rather “a stackable add-on layer” having a plurality of vertically oriented semiconductor memory cells; that plurality is bonded to the dielectric layer. Ex. 1001, 12:29–32. A construction that gives meaning to all words of the claim is preferred. Merck & Co., Inc. v. Teva Pharm. USA, Inc., 395 F.3d 1364, 1372 (Fed. Cir. 2005) (“A claim construction that gives meaning to all the terms of the claim is preferred over one that does not do so.”).” slip op. at 12
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“As discussed above, we do not understand a “stackable add-on layer” to include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. Pet. 16, 29 n.11, 51 (“In Lee, each level 3104 is deposited on the underlying level of array 3101.”). Therefore, Petitioner has not shown that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Analysis: Claims 14–17 Claims 14–17 each depend, directly or indirectly, from claim 13. Petitioner’s arguments with respect to these claims do not remedy the deficiencies noted above with respect to claim 13. Pet. 31–41. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14–17 would have been obvious over Lee.” slip op. at 19
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“We agree with Patent Owner that Petitioner has not demonstrated that Aspar would improve Lee, would solve a problem in Lee, and that Petitioner is proposing to use Aspar in a way that is not disclosed in the reference. PO Resp. 49–50 (citing Ex. 2029 ¶¶ 153–162); Tr. 57:24–58:12; Pet. 61; KSR, 550 U.S. at 417 (asking whether a technique “would improve similar devices in the same way”), 420 (asking whether there was a known problem in the art), 421 (asking whether one of ordinary skill in the art had reason to “pursue the known options”); Intel, 61 F.4th at 1381 (explaining that obviousness may be demonstrated by showing that there was a known problem in the art (“cache coherency in multiprocessor systems”) and that a person of ordinary skill in the art would recognize that that the prior art solution to this problem (“global segmented secondary cache”) would improve the system of another prior art reference). Petitioner does not persuasively show that there was any known problem in the art with respect to Lee or its monolithic method of constructing memory arrays. Nor does Petitioner provide persuasive argument or evidence that Aspar’s wafer bonding would improve Lee’s memory device.10 For example, Petitioner states in a conclusory fashion that Aspar would address the known problem of “fabricating 3D structures,” but does not explain what those problems were or why Lee fails to solve them. Pet. 61. Dr. Sechen’s testimony merely parrots the Petition, providing no further analysis or explanation of what problem might exist in Lee when fabricating its 3D structures. Ex. 1003 ¶ 212. The Petition notes that Aspar transfers “thin layers of very good thickness homogeneity and with a high crystalline quality,” but the Petition never asserts that Lee’s direct deposition method fails to provide these same or similar qualities. Pet. 60–61.” slip op. at 27
Patent outcomesUS 7,378,702 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,378,702 - Micron Technology, Inc. / Micron Semiconductor Products, Inc. et al. v. Besang Inc.No claims unpatentablePTAB · Nov 13, 2024 · IPR2023-00900 · APJ Jon B Tornquist · IPR · Final written decision
Claims 13–17 were not shown unpatentable: Lee-based grounds fail on the stackable add-on layer limitation, and Watanabe-based grounds fail on nonvolatile memory, enablement, or motivation to combine.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“meaning in the art. See Irdeto Access, Inc. v. Echostar Satellite Corp., 383 F.3d 1295, 1300 (Fed. Cir. 2004) (stating that, absent an accepted meaning in the art, “we construe a claim term only as broadly as provided for by the patent itself”). Thus, we must attempt to discern the meaning of this term from the claim language itself and from the remainder of the intrinsic record. See Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate.” slip op. at 10
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“As discussed above, we construe “stackable add-on layer” to not include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. See Pet. 52 (asserting that in Lee “the layers of the array are directly deposited on the layers of each underlying level, and the array is deposited on the interlayer insulating layer formed over a substrate”); see also id. at 70 (“Lee discloses forming vertical memory devices through layer-by-layer sequential deposition on the substrate . . . .”). Therefore, Petitioner does not show that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Claims 14 and 15 Claims 14 and 15 depend from claim 13. Ex. 1001, 12:35–42. Petitioner’s arguments for these claims do not remedy the deficiencies noted above with respect to independent claim 13. Pet. 54–59. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14 and 15 would have been obvious in view of Lee alone. E. Claims 16 and 17 over Lee and Endoh Petitioner contends the subject matter of claims 16 and 17 would have been obvious over the combined disclosures of Lee and Endoh. Pet. 59–69. Petitioner’s arguments with respect to these claims, however, do not remedy the deficiencies noted above with respect to Lee and its monolithic, sequentially deposited memory array. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 16 and 17 would have been obvious over Lee and Endoh.” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“combined Lee and Watanabe to achieve improved integration density. Pet. 71. Petitioner concedes, however, that the benefits of Lee’s design related to 3-D integration and improved integration density would be obtained if Lee’s memory structures are formed using either Lee’s monolithic construction method or Watanabe’s alternative stacking method. Pet. Reply 13–14 (citing Ex. 1041 ¶ 34). Thus, we are not persuaded that improved integration density provides a sufficient rationale for Petitioner’s combination of Lee’s memory device and Watanabe’s stacking method. Petitioner argues that Watanabe’s stacking method “improves the accuracy of the wiring” because the wiring is made “for each planar member.” Pet. 72 (citing Ex. 1005, 6:1–3). Watanabe also states that its disclosed methods provide “a low interconnection wire resistance.” Ex. 1005, 6:20–23. Petitioner does not, however, explain sufficiently how Watanabe’s stacking method would improve Lee’s device. For example, Petitioner does not address whether the alleged wiring benefit already existed in Lee’s monolithic array or explain how this benefit would also apply to Lee’s particular memory array, which differs in construction and elements from Watanabe’s device. This diminishes Petitioner’s benefits-based motivation to combine arguments. In general, a petitioner need not demonstrate that a particular alternate method would improve a prior art device in order to show a motivation to combine. Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380–81 (Fed. Cir. 2023); see Pet. Reply 20 (citing Intel). But here, Petitioner affirmatively invokes improvement of Lee’s device as a reason for the combination, and we must evaluate Petitioner’s contention. Moreover, any relative lack of improvement or benefits must be weighed against any problems the alternative method would introduce. See Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 795–96 (Fed. Cir. 2021) (noting that simultaneous advantages and disadvantages to a proposed combination must be analyzed to determine whether the disadvantages “outweighed any reason to combine”). Here, as discussed above in more detail with respect to the ground based on Watanabe, the evidence shows that one of ordinary skill in the art would have expected Watanabe’s bonding temperature of 900– 1000° C to damage the electronic devices in an underlying substrate. Ex. 2029 ¶¶ 75–76; Ex. 2028, 123:13–124:7; Ex. 2027, 715. The expected damage to Lee’s device, when balanced against the limited evidence of a benefit to the combination,7 outweighs the reason to combine Lee and Watanabe set forth in the Petition. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious over Lee and Watanabe. 2. Analysis – Claims 14 and 15 Claims 14 and 15 both depend directly from independent claim 13. Ex. 1001, 12:35–42. Petitioner’s arguments with respect to claims 14 and 15 do not remedy the deficiencies noted above with respect to independent claim 13. Pet. 73. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that these claims would have been obvious over Lee and Watanabe.” slip op. at 40
- Expert testimonyPatent owner expert creditedOther
“We credit the testimony of Dr. Przybylski that one of ordinary skill in the art would have understood that Watanabe’s stacked structure would be severely impacted if bonded at a temperature above 900° C, as disclosed in Watanabe. Ex. 2029 ¶¶ 76–77. Dr. Przybylski’s opinion is supported by Dr. Lee’s testimony (Ex. 2028, 123:13–124:7, 125:6–126:7), as well as Watanabe (Ex. 1005, 6:6–14) and Batude (Ex. 2027, 715). As further discussed below, we find that Petitioner has not rebutted Patent Owner’s showing of nonenablement, and Patent Owner has carried its burden to demonstrate that Watanabe was not enabled for bonding temperatures of 900–1000° C, as of the 2004 filing date of the ’702 patent.” slip op. at 32
Patent outcomesUS 7,378,702 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,378,702 - Axonics, Inc. v. Medtronic, Inc.No claims unpatentablePTAB · May 30, 2024 · IPR2020-00712 · APJ James A Tartal · IPR · Remand
Claims 3–6, 9–12, and 15–18 were not proven unpatentable because the petitioner failed to show the required two inputs in the asserted prior art.
RulingsRemand decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionDecided for patent owner
“The Specification of the ’148 patent states that “an alignment measurement may be made by measuring a value, e.g., current or voltage, associated with, e.g., proportional to, the current passing through [the] rechargeable power source.” Id. at 21:3–6. We therefore find that the Specification expressly identifies “current or voltage” as examples of “a value.” Id. In the FWD, we stated that “[a]lthough the ’148 patent makes clear that ‘a value’ may include, for example ‘voltage,’ we agree with Patent Owner that the two independent limitations should be construed such that the Value Limitation does not render superfluous the Signal Limitation or the Measured Voltage Limitation.” FWD 26. We further determined that “the Value Limitation and the Signal Limitation, as well as the Value Limitation and the Measured Voltage Limitation both require two separate inputs to the external power source.” Id. That determination is not at issue here. See Axonics, 75 F.4th at 1379–80 (stating that Petitioner did “not argue the Board erred in adopting the two-input claim construction”). 2. Additional Claim Terms We find no additional claim term requires express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 22
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art The person of ordinary skill in the art is a hypothetical person who is presumed to have known the relevant art at the time of the invention. In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” Id. (citation omitted). Petitioner contends that a person of ordinary skill in the art at the time of the invention “would have had at least a bachelor’s degree in electrical the industry working with implantable medical devices such as cardiac pacemakers or defibrillators.” Pet. 8. Patent Owner argues that a person of ordinary skill “would have had at least a bachelor’s degree in a relevant field (e.g., electrical, mechanical, or biomedical engineering) with at least two years of experience with the design of components (e.g., circuitry) for implantable medical devices and associated external devices (e.g., a charging unit),” and that “[m]ore education can substitute for practical experience and vice versa.” PO Resp. 4–5 (citing Ex. 2002 ¶¶ 21–22). Our analysis here, as in the FWD, does not turn on which of the Parties’ competing definitions of ordinary skill is applied. See FWD 16. Moreover, the appropriate level of ordinary skill is not in dispute on remand. Consistent with the FWD and the Decision on Institution, we apply the level of ordinary skill in the art proposed by Petitioner. See Inst. Dec. 11 (stating that “the ’148 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of appropriate skill reflected in these references . . . is consistent with the definition of a person of ordinary skill in the art proposed by Petitioner” (citing Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001))); FWD 16.” slip op. at 18
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“By contrast, in his Rebuttal Declaration, Dr. Mihran disputes Dr. Panescu’s new description of the operation of Schulman, noting that the current through R9 is not increased as a result of the current regulator R8/Q7 turning on, but that “[i]nstead, it is the increase in current through R9 in excess of the desired 40 mA operating current that causes the current regulator R8/Q7 to turn on, which acts to shunt this excess current through Q7, thereby diverting it away from the battery to maintain the desired operating condition during charging.” Ex. 2010 ¶ 6 n.3 (citing Ex. 1005, 5:2–7, 5:15–38, 9:57–68). We credit the testimony of Dr. Mihran, as supported by the cited portions of Schulman, over the unsupported testimony of Dr. Panescu in regard to how Schulman operates to measure current at R9. See id. However, whether Schulman discloses automatically varying the output power of the external power source based on a value associated with current passing through the internal battery, as required by the Value Limitation, is not in dispute. Dr. Mihran, for example, states that “Schulman discloses that the sole input provided to the external power” slip op. at 34
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“Patent Owner argues, and we agree, that the measured current through R9 is the only input to the external power source Schulman APO Sur-reply 14–15. Patent Owner further argues, and we further agree, that the voltage across output leads 51 and 52 of Schulman is not an input to the external power source separate from the measured current through R9 in Schulman. See APO Sur-reply 11–16 (citing, e.g., Ex. 1003 ¶ 75; Ex. 2002 ¶ 46; Ex. 1005, 6:35–38; Ex. 2010 ¶¶ 4–7). In support of Patent Owner, Dr. Mihran states that “[t]he voltage between nodes 51 and 52 is never provided to the external power source in Schulman.” Ex. 2010 ¶ 4. According to Dr. Mihran, “Schulman discloses that the sole input provided to the external power source that the external power source uses to automatically regulate its power output is the input that derives from the amount of current flowing through the current sampling resistor R9.” Id. ¶ 5 (emphasis omitted) (citing Ex. 1005, 4:45–53, 6:35–38; Ex. 2002 ¶ 46). Dr. Mihran further states as follows: My understanding of Dr. Panescu’s opinion is that he does not contend that the voltage between nodes 51 and 52 is ever sent to the external power source as an input, and instead simply asserts that if “the voltage across leads 51 and 52 exceeds a predetermined amount,” then the current through R9 increases, which in turn “causes the power supplied by the external power source to decrease.” (Ex. 1012 at ¶16.) This does not represent a separate input, however, because the input derived from the current flowing through the current sampling resistor R9 (i.e. the load modulation frequency of telemetry circuit 12, the components of which “form a free-running multivibrator”) is what Dr. Panescu also identifies as satisfying the first input, “a value associated with said current passing through said internal battery.” (Ex. 1012 at ¶14 (“when the current through the internal battery . . . increases above a predetermined target value, the current regulator turns on, increasing the current through current sampling resistor R9.”) operating conditions may influence the value” of the amount of current flowing through current sampling resistor R9, and the current through R9 is the “only value that is communicated to the external power source,” corresponding to a single input that “cannot satisfy both of the two inputs required by claims 3, 6, 9, 12, 15, and 18 of the ’148 patent.” Id. ¶ 6. Dr. Mihran further states as follows: I understand Dr. Panescu’s opinion to be that, because Schulman discloses that the current through R9 is used by the external charger to automatically vary its output, any “value” that influences the amount of current through resistor R9 is a “separate respective input[] used by the external power source as a basis for automatically varying its power output.” ([Ex. 1012 ¶14].) In other words, Dr. Panescu simply identifies a voltage across two points in the circuit that he claims affects the current through R9 and contends that that voltage satisfies one of the two required separate inputs based on its alleged indirect impact on the output of the external charger. This strained interpretation of the claims renders superfluous the two separate inputs to the external power source required by claims 3, 6, 9, 12, 15, and 18 of the ’148 patent: (1) “a value associated with said current passing through said internal battery” and (2) “a signal proportional to said current passing through said internal battery” (claims 3, 9, and 15) and “measured voltage associated with said current passing through said internal battery” (claims 6, 12, and 18). In any circuit, there may be multiple components (e.g., transistors, switches, diodes, etc.) that can influence the current through a particular resistor. For example, in Schulman the current drawn by the stimulation portion of the implant circuit will influence the amount of current through R9. Dr. Panescu’s interpretation that a voltage or current at these components represents a “separate input” in Schulman is incorrect, because the sole input that is telemetered back to the external charger is the input derived from the amount of current flowing through R9.” slip op. at 35
Patent outcomesUS 8,738,148 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,738,148 - Axonics, Inc. v. Medtronic, Inc.No claims unpatentablePTAB · May 30, 2024 · IPR2020-00680 · APJ James A Tartal · IPR · Remand
On remand, the Board determined that claims 1, 5, and 9 were not shown unpatentable as anticipated by Schulman, Fischell, or Baumann.
RulingsRemand decision- BurdenNot shown unpatentable
“consider for purposes of the FWD. We also consider Patent Owner’s Amended Sur-reply, as supported by the Rebuttal Declaration of Dr. Mihran, and the arguments and evidence advanced in the post remand briefs of the Parties. Based on the totality of the record in this case, we determine, for the reasons that follow, that Petitioner does not show by a preponderance of the evidence that any of claims 1, 5, or 9 is anticipated by Schulman, Fischell, or Baumann. A. Principles of Law A claim is anticipated if a single prior art reference either expressly or inherently discloses every limitation of the claim. Orion IP, LLC v. Hyundai Motor Am., 605 F.3d 967, 975 (Fed. Cir. 2010). “A single prior art reference may anticipate without disclosing a feature of the claimed invention if such feature is necessarily present, or inherent, in that reference.” Allergan, Inc. v. Apotex Inc., 754 F.3d 952, 958 (Fed. Cir. 2014) (citing Schering Corp. v. Geneva Pharm., 339 F.3d 1373, 1377 (Fed. Cir. 2003)).” slip op. at 17
- Skill levelSkill level petitioner adoptedOther
“B. Level of Ordinary Skill in the Art The person of ordinary skill in the art is a hypothetical person who is presumed to have known the relevant art at the time of the invention. In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” Id. (citation omitted). of the invention “would have had at least a bachelor’s degree in electrical engineering or an equivalent as well as at least five years of experience in the industry working with implantable medical devices such as cardiac pacemakers or defibrillators.” Pet. 7. Patent Owner argues that a person of ordinary skill “would have had at least a bachelor’s degree in a relevant field (e.g., electrical, mechanical, or biomedical engineering) with at least two years of experience with the design of components (e.g., circuitry) for implantable medical devices and associated external devices (e.g., a charging unit),” and that “[m]ore education can substitute for practical experience and vice versa.” PO Resp. 5 (citing Ex. 2002 ¶¶ 21, 22). Our analysis here, as in the FWD, does not turn on which of the Parties’ competing definitions of ordinary skill is applied. See FWD 16. Moreover, the appropriate level of ordinary skill is not in dispute on remand. Consistent with the FWD and the Decision on Institution, we apply the level of ordinary skill in the art proposed by Petitioner. See Inst. Dec. 11–12 (stating that “the ’758 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of appropriate skill reflected in these references is consistent with the definition of a person of ordinary skill in the art proposed by Petitioner” (citing Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001))); FWD 16.” slip op. at 17
- Expert testimonyPatent owner expert creditedPetitioner expert discountedOther
“By contrast, in his Rebuttal Declaration, Dr. Mihran disputes Dr. Panescu’s new description of the operation of Schulman, noting that the current through R9 is not increased as a result of the current regulator R8/Q7 turning on, but that “[i]nstead, it is the increase in current through R9 in excess of the desired 40 mA operating current that causes the current regulator R8/Q7 to turn on, which acts to shunt this excess current through Q7, thereby diverting it away from the battery to maintain the desired operating condition during charging.” Ex. 2010 ¶ 6 n.2 (citing Ex. 1005, 5:2–7, 5:15–38, 9:57–68). We credit the testimony of Dr. Mihran, as supported by the cited portions of Schulman, over the unsupported testimony of Dr. Panescu in regard to how Schulman operates to measure current at R9. See id. However, whether Schulman discloses automatically varying the output power of the external power source based on a measured current, as required by the challenged claims, is not in dispute. Dr. Mihran,” slip op. at 32
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“We find that because it is largely unsupported and conclusory, the opinion of Dr. Panescu in his Supplemental Declaration that “Schulman teaches automatically varying the output power of the external power source based on a value, where the value is the voltage across the output leads 51 In his original declaration, Dr. Panescu made clear that, according to Schulman, the output of the external power source was lowered if the charging current, as measured at sampling resistor R9, “exceeds a maximum capacity,” not because of the voltage across output leads 51 and 52. See Ex. 1003 ¶ 127 (quoting Ex. 1005, 7:25–29). Petitioner does not allege that any measurement of voltage across output leads 51 and 52 in Schulman is conveyed to an external power source to automatically vary its power output. Instead, Petitioner’s argument is premised on the notion that if the voltage across leads 51 and 52 exceeds a predetermined amount, then it will affect the current sampled by resistor R9. We also find persuasive Dr. Mihran’s testimony that Petitioner’s strained interpretation renders the Value Limitation superfluous to the Measured Current Limitation because the voltage across leads 51 and 52 was not shown by Petitioner to be a separate input to the external power source. See Ex. 2010 ¶ 7 (explaining that “there may be multiple components (e.g., transistors, switches, diodes, etc.) that can influence the current through a particular resistor,” and that influencing the current measured at R9 does not constitute a separate input to the external charger from the measured current at R9). To be clear, we need not resolve whether the challenged claims require each separate input be separately conveyed to the external power source. Here, the burden to show anticipation is on Petitioner and Petitioner offers no persuasive evidence or explanation to establish by a preponderance of the evidence that a person of ordinary skill in the art would have understood the voltage across output leads 51 and 52 corresponds to “a value” based upon which the external power source “automatically” varies its power output, as required by the challenged claims. Nor does skill in the art would have understood the voltage across leads 51 and 52 in Schulman to be a separate input from the measured current at R9 when, at most, Petitioner alleges the voltage across leads 51 and 52 may, in certain circumstances, have some effect on the measured current at R9, itself. Thus, Petitioner does not show by a preponderance of the evidence that Schulman discloses to a person of ordinary skill in the art two separate inputs to the external power source, as Petitioner conceded is required by the Value Limitation and the Measured Current Limitation.” slip op. at 35
Patent outcomesUS 8,457,758 not shown unpatentableClaim construction§ 102 anticipationcites PhillipsPatents in suitUS 8,457,758 - Nespresso USA, Inc. v. K-Fee System GMHBNo claims unpatentablePTAB · Apr 10, 2024 · IPR2022-01574 · APJ James J Mayberry · IPR · Final written decision
Claims 1–13 were not shown unpatentable because the asserted combinations did not teach or render obvious the claimed groove entirely to the side of the chamfered mandrel.
RulingsFinal written decision- Skill levelSkill level board ownPatent owner expert discountedDecided for patent owner
“The Federal Circuit has made clear that, “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case—like for claim construction, validity, or infringement—a witness must at least have ordinary skill in the art.” Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022) (emphasis added). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377. The Federal Circuit reasons that “‘[a]dmitting testimony from a person . . . with no skill in the pertinent art serves only to cause mischief and confuse the factfinder.’ . . . That testimony would ‘amount[ ] to nothing more than advocacy from the witness stand.’” Id. (quoting Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362, 1364–65 (Fed. Cir. 2008)). possesses at least the level of ordinary skill in the art. Our level of ordinary skill in the art requires a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier. Patent Owner does not persuasively account for how Dr. Howle’s experience, extensive as it may be, includes five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier. Cf. Kyocera, 22 F.4th at 1376 (“Dr. Pratt has advanced degrees in engineering and extensive experience in the design and manufacture of fastener driving tools. But he lacks experience in power nailer design.”).” slip op. at 21
- Expert testimonyPatent owner expert discountedDecided for petitioner
“The Federal Circuit has made clear that, “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case—like for claim construction, validity, or infringement—a witness must at least have ordinary skill in the art.” Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022) (emphasis added). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377. The Federal Circuit reasons that “‘[a]dmitting testimony from a person . . . with no skill in the pertinent art serves only to cause mischief and confuse the factfinder.’ . . . That testimony would ‘amount[ ] to nothing more than advocacy from the witness stand.’” Id. (quoting Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362, 1364–65 (Fed. Cir. 2008)). possesses at least the level of ordinary skill in the art. Our level of ordinary skill in the art requires a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier. Patent Owner does not persuasively account for how Dr. Howle’s experience, extensive as it may be, includes five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier. Cf. Kyocera, 22 F.4th at 1376 (“Dr. Pratt has advanced degrees in engineering and extensive experience in the design and manufacture of fastener driving tools. But he lacks experience in power nailer design.”).” slip op. at 21
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Based on the information above, we conclude that the limitation “a groove that is laterally offset from the chamfered mandrel” requires the groove to be entirely to the side of any part of the mandrel. This construction is consistent with the words of the claim—the claim states that the groove is laterally offset from, or to the side of, the chamfered mandrel, not merely offset from a portion of or the centerline of the mandrel. This construction is also consistent with the one embodiment describing the relationship between the mandrel and groove containing the seal, which depicts the groove entirely to the side of the chamfered mandrel. We do not accept Mr. Jobin’s testimony that laterally offset is determined relative to the centerline of an object. Neither the intrinsic record nor other extrinsic evidence provides support for Mr. Jobin identifying the centerline of an object as the reference point for determining if a point is laterally offset from the object.” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“We do not agree with Petitioner that Yoakim teaches a groove that is laterally offset from the chamfered mandrel. As we indicated in our claim construction section, we construe the claim term to require the groove to be entirely to the side of any part of the mandrel. We agree with Patent Owner that, as depicted in Yoakim’s Figure 35, the alleged groove is not entirely to the side of any part of the mandrel. See Pet. 69; see also Pet. Reply 19 (showing the alleged groove, in red, including a portion over the chamfered mandrel); PO Resp. 55 (same). Even if Petitioner’s position is that all of the groove must be to the side of the centerline of the mandrel, Petitioner fails to prove that Yoakim teaches such a structure. As seen in Petitioner’s illustration at page 19 of Petitioner’s Reply (reproduced above), a small portion of the groove (which Petition colorizes in red) is to the left of the centerline (shown in green). See Pet. Reply 19.” slip op. at 40
Patent outcomesUS 11,254,491 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,254,491 - Axonics, Inc. v. Medtronic, Inc.No claims unpatentablePTAB · Mar 21, 2024 · IPR2020-00715 · APJ Brent M Dougal · IPR · Remand
On remand, the majority determined claims 1, 2, 5, 7, 13–15, and 18 were not shown unpatentable under either of two §103 grounds, because the asserted combinations lacked sufficient support.
RulingsRemand decision- Skill levelSkill level board ownOther
“In view of the above, and the evidence of record, we find on remand that the relevant art is medical leads. We previously found that the level of ordinary skill in the art requires “experience researching and developing medical leads for sacral neuromodulation.” FWD 16. Consistent with the Federal Circuit decision and our finding of the relevant art, the experience of one of ordinary skill is not limited to “sacral neuromodulation.” Rather, the level of ordinary skill in the art requires experience in the relevant art, which is medical leads.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“B. Claim Construction In an inter partes review, we construe claims using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. § 282(b), including construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent. 37 C.F.R. § 42.100(b). No terms require express construction. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“Gerber indeed suggests anchoring its lead by fibrosis. Namely, Gerber discloses: “Yet another anchoring mechanism 50 is to allow the medical lead 10 to fibrose in naturally using the human body’s natural reaction to a foreign body or healing.” Ex. 1010, 4:27–30. Moreover, there is no dispute that tines secure via fibrosis. Petitioner, however, acknowledges that any foreign object introduced into the body will cause fibrosis. Tr. 12:8– 13. Nonetheless, Petitioner maintains that Gerber’s disclosure of securing its lead by fibrosis would have led a POSITA to choose tines because tines were a leading candidate among the devices that anchor by fibrosis. Pet. 51 (citing Ex. 1003 ¶ 115) (emphasis added). Petitioner’s argument relies on Mr. Pless’s opinion that tines were a leading candidate for securement via fibrosis, and Mr. Pless’s opinion is based his review of the conventional uses of tines. Tr. 12:18–24 (Petitioner explaining that pages 13–16 of Mr. Pless’s Declaration provide support for his opinion that tines were most commonly used for fixation via fibrosis). According to Mr. Pless, “[b]efore 2001, tines were the most commonly used passive fixation, especially due to the predominant usage of tines in the cardiac space. Tines help to anchor the lead immediately after implantation by engaging with the body tissue, and then by fibrosis.” Ex. 1003, 15–16. Gerber’s lead, however, is for sacral nerve stimulation and is implanted in the sacral area via an open surgical procedure. Ex. 1010, 1:7–15, 5:32–39. We find credible Dr. Siegel’s testimony that Gerber’s device is implanted via an open surgical procedure in which the periosteum and soft tissues surrounding the implantation site are dissected, compromising their structural integrity and rendering tines, which initially anchor by engaging body tissue, ineffective. Thus, despite the prevalent use of tines in the cardiac space to secure leads by engaging body tissue and then by fibrosis, Petitioner has not persuaded us that Gerber’s disclosure of securing its lead by fibrosis would have led a POSITA to replace Gerber’s anchoring mechanism with tines. Regarding Petitioner’s reasoning for positioning tines according to Akerström’s arrangement, Lindegren attributes a manufacturing preference to tines integrally formed and evenly spaced on rings, not proximally extending tines that are adapted to be folded inwardly against the lead body without overlap. Ex. 1011, 5:17–20 (“From the manufacturing point of view, having the projections devised as an integral part of a one-piece ring-shaped means and evenly distributed around the circumference of the ring-shaped means, should be preferable.”). Moreover, according to Petitioner, a smaller profile is suited to percutaneous delivery (Pet. 51), but Gerber’s lead is implanted via an open surgical procedure (Ex. 1010, 1:7–15, 5:32–39). Accordingly, Petitioner has not persuaded us that a POSITA would have had a reason to include, in Gerber’s lead, Hauser’s tines situated according to Akerström’s arrangement.” slip op. at 24
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“We credit Dr. Slavin’s testimony that the trigeminal cistern is a fluid- filled cavity that does not contain tissue for the tines to “engage” with, or be damaged by. Ex. 2029 ¶ 54–55. Dr. Slavin testifies that he is “a board certified neurosurgeon and [has] been in active clinical practice that includes all aspects of neuromodulation, spinal surgery and surgery for pain, including implantation of electrical stimulation devices, surgery on vertebral column including sacrum, trigeminal nerve surgery and so forth.” Ex. 2029 ¶ 5. Thus, Dr. Slavin has extensive knowledge of the areas around the trigeminal nerve. In contrast, Mr. Pless, an electrical engineer and product designer for electrical stimulations device in various areas of the body (Ex. 1003 ¶¶ 3–16), testifies that he believes there is tissue in the area of implantation in Young, but states “I'm not exactly sure what that tissue would be.” Ex. 2026, 123:21–23. Thus, we do not credit Mr. Pless’s testimony that Young’s tines can be damaged because of the body tissue 16 Hauser, discussed in the next ground, teaches tines on the distal most end which impliedly would be advanced out of the introducer, before advancement and placement of the electrode. Ex. 1013, 4:1–3, 4:26–51, Figs. 1, 6. present in the area of implantation of Young. As noted previously, the Petition relies exclusively on Young for teaching this method step of claims 1 and 14.” slip op. at 16
Patent outcomesUS 8,036,756 not shown unpatentableClaim construction§ 103 obviousnessPatents in suitUS 8,036,756 - Recor Medical, Inc. / Otsuka Medical Devices Co., Ltd. v. Medtronic Ireland Manufacturing Unlimited Co.No claims unpatentablePTAB · Jul 14, 2023 · IPR2022-00431 · APJ Eric C Jeschke · IPR · Final written decision
Claims 1–4 and 8–12 were not shown unpatentable because Petitioner did not prove the asserted anticipation or obviousness grounds by a preponderance of the evidence.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends, with accompanying declaration testimony, that [t]he level of ordinary skill encompassed a team of people, having a person with a Ph.D. or M.D. and five years of clinical and/or research experience treating diseases of the kidneys and circulatory systems and a person with at least a Bachelor’s degree in biomedical engineering or a related field and at least five years of experience designing catheter-based ablation systems. Pet. 40 (emphasis omitted) (citing Daft Pet. Decl. ¶¶ 64–68). Patent Owner responds that, “[f]or purposes of this proceeding, [Patent Owner] does not object to the definition of a person of ordinary skill in the art (‘POSITA’) proffered by Petitioner[] and adopted by the Board at institution as the result remains the same regardless of the definition—the Challenged Claims are valid.” PO Resp. 16; see also Dec. Inst. 15–17 (adopting, for purposes of institution, Petitioner’s proposed definition of the person of ordinary skill in the art). In addition, however, Patent Owner proposes a different level of ordinary skill in the art “should the Board believe that the difference in definition impacts the outcome” of this proceeding.8 PO Resp. 16. Both Petitioner and Patent Owner discuss how” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“to transmit ultrasound energy waves to target renal neural fibers” (claim 1, element 1d) and “configured to [perform certain functions] to the target neural fibers” (claims 3, 4, 8, and 9). See Pet. 23–25; PO Resp. 17–22; Pet. Reply 10; PO Sur-reply 1–2. Petitioner asserts that the phrase “configured to” should be construed as “able to.” Pet. 23; see Pet. 23–24 n.5 (discussing how “able to” has the same meaning as “capable of”). Patent Owner responds that “[t]he Board need not reach the construction of this term as Petitioner[’s] arguments fail under either construction, but to the extent a construction is required, ‘configured to’ should be construed as ‘designed to.’” PO Resp. 18. Based on the complete record, we do not discern a need to construe explicitly this phrase because doing so would not change the result of the analysis below. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (stating that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“the alleged motivation to use the device of Acker in Levin’s renal neuromodulation method. As noted by Patent Owner, after introducing Webster (by patent number), Levin states that “[s]imilar catheter based apparatus can be used to ablate the renal nerve with an intent to treat [Chronic Renal Failure].” Ex. 1004 ¶ 64 (emphasis added) (cited at PO Resp. 39 (discussing how “Levin explicitly qualif[ies] its statement by referring to ‘similar’ (not identical) catheters”)). But neither Petitioner nor its declarants have established that Acker’s ultrasound catheter is in fact “[s]imilar” to that in Webster in a manner that would support the view that one of ordinary skill in the art would have understood that Acker’s catheter could be used to “ablate the renal nerve with an intent to treat [Chronic Renal Failure]” as disclosed in paragraph 64 of Levin—i.e., to perform Levin’s renal neuromodulation method. See id. Dr. Mendelsohn states that Acker’s use of ultrasound-based ablation falls within the “any thermal means” disclosure in Webster (see Ex. 1052, 3:40–42), but Dr. Mendelsohn does not address why Acker’s ultrasound catheter is “[s]imilar” to the catheter in Webster (even after expressly noting the presence of that statement in Levin). See Mendelsohn Decl. ¶ 71 (“Moreover, Webster teaches transvascular nerve ablation using RF thermal ablation or ‘any thermal means’ and Levin teaches catheters similar to Webster’s can be used for renal denervation. Ultrasound ablation disclosed in Acker is a ‘thermal means’ of ablation.”).” slip op. at 21
- Obviousness (§103) › Objective indicia / secondary considerationsNot reached
“(2) Objective Indicia of Nonobviousness We next turn to Patent Owner’s objective evidence of nonobviousness. Patent Owner alleges (1) unexpected results and skepticism, (2) copying, (3) praise, and (4) long-felt but unsolved need and failure of others. See PO Resp. 60–68; PO Sur-reply 25–27. Petitioner responds. See Pet. Reply 36–37. We have considered the evidence and argument presented by both parties, but do not address the issues in detail. See Alza Corp. v. Mylan Labs., Inc., 391 F.3d 1365, 1373 n.9 (Fed. Cir. 2004) (“Because [patent challenger] has not made a prima facie case of obviousness, we need not address the parties’ assertions regarding the district court’s discussion of secondary considerations.”).” slip op. at 31
Patent outcomesUS 8,845,629 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 8,845,629
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.