• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Microsoft Corporation v. Sterling Computers CorporationAll claims unpatentable
  PTAB · Sep 14, 2026 · IPR2025-00270 · APJ Bach V Hoang · IPR · Final written decision

  Claims 1–13, 15, 18, 20, 21, and 27 are unpatentable as obvious over Rohall and Schiavone, with Gomes added for claims 9 and 27.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Our Institution Decision adopted Petitioner’s definition of a person of ordinary skill in the art. Inst. Dec. 9–10. In its Response, Patent Owner adopts Petitioner’s proposed level of ordinary skill. See PO Resp. 16 (“Patent Owner and its expert adopt the Board’s definition for purposes of this Response.”). Having considered the record, we continue to adopt Petitioner’s proposed level of skill, as articulated above. We are satisfied that Petitioner’s proposal comports with the level of skill necessary to understand and implement the teachings of the ’911 Patent. Accord Inst. Dec. 9–10.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “We agree with Petitioner and determine that the construction of “relational references” does not require the use of a relational model and, further, includes pointers that point to related messages exchanged among users. The intrinsic evidence leads us to this construction. First, the relevant language of claim 1 recites “a message container containing relational references pointing to a plurality of sent submessages stored externally to the message container in the message database.” Ex. 1001, 15:56–59. A relational model is not recited in that language or anywhere else in the claim. See id. at 15:51–16:14. Therefore, the claim does not expressly require a relational model. Furthermore, the claim language supports Petitioner’s interpretation that “relational references” include pointers that point to related messages because the claim states that the “relational references” perform the task of “pointing to a plurality of sent submessages.” Pet. Reply 7. Accordingly, the language of the claim supports a construction that does not require a relational model and at least suggests relational references include pointers.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “No other claim terms need construction for our decision here and we decline unnecessarily doing so. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 15

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentableDecided for petitioner

    “We agree with Petitioner that the ordinarily skilled artisan would have been motivated to combine Rohall and Schiavone because Schiavone provides reasons to apply its techniques to email systems such as Rohall’s. Schiavone describes a need for “ensuring compliance of e-mail messages with applicable standards and/or laws and/or otherwise determining appropriateness of a message for an intended recipient,” especially because there is “a patchwork of local, federal and international laws.” Ex. 1006 ¶ 6. Schiavone also states that filtering emails, e.g., to remove spam, is beneficial. Id. ¶¶ 1–2. As Schiavone describes problems in email systems, which its rules-based email processing technique addresses, we determine that the ordinarily skilled artisan would have been motivated to combine Rohall and Schiavone. See KSR, 550 U.S. at 401 (a reference which teaches, suggests, or motivates its combination may “identify a reason that would have prompted a person of ordinary skill in the art to combine the elements”).” slip op. at 19

  Patent outcomesUS 8,073,911 unpatentable
  Claim construction§ 103 obviousnesscites KSR
  Patents in suitUS 8,073,911
• Meta Platforms, Inc. v. Sterling Computers CorporationAll claims unpatentable
  PTAB · Aug 3, 2026 · IPR2025-00430 · APJ Bach V Hoang · IPR · Final written decision

  Claims 1–3, 5–9, 13–15, 18, 19, and 22 are unpatentable as obvious over Dumais, Rose, and Rose with Bieganski.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Our Institution Decision adopted Petitioner’s definition of a person of ordinary skill in the art. Inst. Dec. 7–8. In its Response, Patent Owner adopts Petitioner’s proposed level of ordinary skill. See PO Resp. 13–14 (“Patent Owner and its expert adopt the Board’s definition for purposes of this Response”). Having considered the record, we continue to adopt Petitioner’s proposed level of skill, as articulated above. We are satisfied that Petitioner’s proposal comports with the level of skill necessary to understand and implement the teachings of the ’217 Patent. Accord Inst. Dec. 7–8.” slip op. at 8

  • ExcludeMotion to exclude, deniedOther

    “We have not considered any of the evidence Patent Owner moves to exclude in reaching our findings and conclusions set for in this Decision. As a result, Patent Owner’s Motion to Exclude this evidence is dismissed as moot.” slip op. at 55

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference is prior artPriority date, deniedDecided for petitioner

    “We determine that Patent Owner has not carried its temporary burden of production to support its contention that the inventors were reasonably diligent throughout the critical period. See Parus Holdings, 70 F.4th at specifically cite the relevant record evidence combined with an explanation of the significance of the produced material in briefs. See id. at 1372 (explaining that “[t]he burden of production cannot be met without some combination of citing the relevant record evidence with specificity and explaining the significance of the produced material in briefs”). Patent Owner states that it “submitted extensive evidence.” PO Sur-reply 14. But simply submitting dozens of exhibits is not enough. As our reviewing court has admonished, the “burden of production cannot be met simply by throwing mountains of evidence at the Board without explanation or identification of the relevant portions of that evidence.” See Parus Holdings, 70 F.4th at 1371. Instead of citing what specific portions of those exhibits are relevant and why, Patent Owner cites entire exhibits and asserts, without analysis or explanation, that they show diligence. See PO Resp. 49– 50 (citing numerous exhibits without pinpoint citations). Patent Owner’s Sur-reply asserts that Patent Owner’s Response was adequate (PO Sur-reply 17), but an examination of the Response shows that it was not. For example, in its Response, Patent Owner states “numerous documents corroborating [the inventors’] testimony that, during the critical period, they were refining the formulas to implement the BlueSpace relevance model” by citing the entirety of so-called “corroborating documentation” spanning Exhibits 2032 through 2074 as well as the entirety of Justin Marston’s Second Supplemental Declaration (Ex. 2030) and Paul Marston’s Declaration (Ex. 2031). See PO Resp. 49. However, there is not a single pinpoint citation to any particular paragraph, page, or entry for any of those exhibits (a number of which approach 100 pages in length) in Patent Owner’s discussion. See id. Even less helpful, the Response does not inventors actually worked on the claimed invention. See id. That is, the Response does not state exactly what in the “corroborating documentation” actually corroborates the inventors’ testimony or itself shows diligence. If anything, the Response points out that the inventors were engaged in other activities: “Justin Marston had numerous other obligations running the company BlueSpace, and Paul Marston was working a full-time position as a lecturer on statistics.” PO Resp. 49; PO Sur-reply 15–16. We do not fault the Marstons for engaging in other activities, but Patent Owner’s discussion of the Marstons’ other activities and mere conclusory assertions of diligence, without more, do not show that the Marstons were reasonably diligent as to the relevant activities during the critical time period. Simply put, Patent Owner’s Response does not adequately explain exactly how or why the evidence supports its argument that the inventors were reasonably diligent throughout the critical period. We decline the invitation to sift through the hundreds of pages spanning dozens of exhibits in search of evidence and reasons supporting Patent Owner’s assertion of diligence.” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “combined Rose and Bieganski. Rose and Bieganski are both concerned with recommending content to a user based on other users’ content preferences. Ex. 1006, code (57); Ex. 1007, code (57). Petitioner, supported by Dr. Fox, adequately shows that Bieganski discloses an improved technique for selecting which other users’ preferences are considered in a recommendation. Pet. 71 (citing Ex. 1003 ¶¶ 235–236), 75 (citing Ex. 1003 ¶¶ 247–248). We agree that improving Rose’s content ranking system using Bieganski’s content recommendation technique sufficiently motivates the combination. See KSR Int’l, 550 U.S. 417 (noting that where “a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious”). Patent Owner’s argument that Bieganski’s approach is not an improvement over Rose because Rose “teach[es] that feedback from all users is valuable” (PO Sur-reply 9–10 (citing Ex. 2029 ¶ 199)) has two faults. First, that argument mischaracterizes Rose. We find no description in Rose which states that feedback from all users is “valuable” such that selecting certain users is not an improvement. Rather, Rose aligns with Bieganski’s selection of relevant users because Rose emphasizes feedback from similar users by adjusting the weight given to feedback from users who are more or less correlated. Ex. 1006, 6:64–7:1, 7:10–34 (“Rjk is the correlation of users i and k, the Vkj is the weight indicating the feedback of user k on document j.”). Second, even if Rose describes an embodiment where feedback from all users is considered, that does not preclude motivating improvement. See PAR Pharm., Inc. v. TWI Pharms., Inc., 773 F.3d 1186, 1197–98 (Fed. Cir. 2014) (noting it is not necessary to show that a combination is “the best option, only that it be a suitable option”).” slip op. at 47

  Patent outcomesUS 7,716,217 unpatentable
  § 102 anticipation§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 7,716,217
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• Abbott Laboratories v. Miracor Medical SASome claims unpatentable
  PTAB · Jun 11, 2026 · IPR2025-00115 · APJ Annette R Reimers · IPR · Final written decision

  Claims 1–4, 10, 11, 14, 17, 21, 22, 24, 26, 28–30, 32, 33, and 35 are unpatentable; claim 15 is not shown unpatentable, based on the four asserted obviousness grounds.

  RulingsFinal written decision

  • ExcludeMotion to exclude, deniedDenied

    “IV. PATENT OWNER’S MOTION TO EXCLUDE Patent Owner seeks to exclude portions of Dr. Wieselthaler’s Declaration (Exhibit 1041), portions of Mr. Crosby’s Reply Declaration (Exhibit 1042), portions of the deposition transcript of Dr. Wieselthaler (Exhibit 2028), and the exhibits “upon which that testimony is based” (Exhibits 1015, 1038, 1044, 1046, 1049, and 1050). Mot. 1. According to Patent Owner, the Motion was made “to preserve objections previously made in the record.” Id. (citations omitted). Patent Owner did not timely move to strike any of the evidence at issue as being outside the scope of reply evidence. Patent Owner asserts that because an inter partes review must be based on prior art consisting of patents or printed publications (citing 35 U.S.C. § 311(b)), the testimony of Mr. Crosby and Dr. Wieselthaler concerning “various physical devices allegedly known” to a person of ordinary skill in the art is inadmissible, along with all of the exhibits (consisting of printed materials such a journal abstracts, press releases, and papers) related to those physical devices. Id. at 3–4; see also Mot. Reply 1–4 (arguing that “devices that Petitioner’s witnesses assert were in public use prior to the claimed inventions, are not prior art that can form the basis of an inter partes review”). According to Patent Owner, Dr. Wieselthaler was unable to “link two of these physical devices to the printed prior art asserted in this [inter partes review], but those attempts fell apart during his cross examination.” Id. at 4. Patent Owner further reasons that because the evidence “cannot be the basis” of an inter partes review, it “has probable,” “is irrelevant and not admissible,” “presents substantial danger of confusing the issues, causing undue delay, and wasting time in this trial,” and “are not ‘based on sufficient facts[,] the product of reliable principles and methods[, or] ‘a reliable application of the principles and methods to the facts of the case.’” Id. at 7 (citing Fed. R. Evid. 401–403, 702) (modification in original). With regard to Exhibits 1015, 1038, 1044, 1046, 1049, and 1050, Petitioner argues, and we agree, that Patent Owner identifies no plausible legal theory for their inadmissibility based on the contention that they discuss physical devices. See Mot. Resp. 3. We also agree with Petitioner that the exhibits are not “the basis for any ground” asserted in this proceeding, and may be properly relied upon by Dr. Wieselthaler and Mr. Crosby as support for their rebuttal testimony directed to Patent Owner’s arguments disputing Petitioner’s asserted motivation to combine the prior art relied upon in the instituted grounds. See id. at 3–4. In regard to the disputed testimony of Dr. Wieselthaler and” slip op. at 80

  • Skill levelSkill level board ownOther

    “B. Level of Ordinary Skill in the Art In determining the level of ordinary skill in the art, various factors” slip op. at 14

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “‘electronics for power and control’”). According to Mr. Crosby, a person of ordinary skill in the art “would have understood based on the disclosure of this setup that these speed and motor parameters were monitored by a sensor providing feedback to the controller.” Ex. 1003 ¶ 725. Mr. Crosby identifies no support for this opinion, which we give little weight to. The mere fact that Bourque’s pump used software to control speed and motor parameters does not show that Bourque used “one or more sensors” to provide feedback signals to the external control unit. Indeed, Petitioner fails to identify any evidence that Bourque used any “sensor” to monitor “speed and motor parameters.” Mr. Crosby also states that “[e]ach of the ‘ultrasonic flow probe’ and the ‘solid-state catheter-type pressure transducer’ described in [Bourque] is a ‘sensor’ as recited in Claim 33 that provides feedback signals to the external control unit (e.g., ‘electronics for power and control’ and ‘data acquisition’).” Id. ¶¶ 581, 726. Mr. Crosby’s opinion is again unsupported by the evidence, because, as explained above, there is no teaching in Bourque that either the “ultrasonic flow probe” or the “pressure transducers” used in the “in vitro characterization” studies were part of the heart assist pump device. Based on our review and consideration of Petitioner’s arguments and evidence directed to claim 11, we find that Petitioner has not shown by a preponderance of the evidence that the asserted combination of Bourque and Wampler teaches or suggests each of the limitations of dependent claim 11. We reach the same conclusion for the same reasons with regard to claim 33.” slip op. at 48

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “1. “magneto coupling” Claim 1 recites, in relevant part, a second magnetic device “positioned” slip op. at 25

  Patent outcomesUS 11,674,517 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,674,517
• Abbott Laboratories v. Miracor Medical SASome claims unpatentable
  PTAB · Jun 11, 2026 · IPR2025-00096 · APJ James A Tartal · IPR · Final written decision

  Claims 1–4, 6, 7, 10, 12, and 13 are unpatentable as obvious over Schima and Akamatsu; claim 5 was not shown unpatentable.

  RulingsFinal written decision

  • ExcludeMotion to exclude, deniedDenied

    “consequence in determining the action.” Fed. R. Evid. 401. Fed. R. Evid. 702 serves “a ‘gatekeeping role,’ the objective of which is to ensure that expert testimony admitted into evidence is both reliable and relevant.” Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1360 (Fed. Cir. 2008). There is no question that the disputed testimony of Dr. Wieselthaler and Mr. Crosby is relevant to the asserted motivation to combine and reliable, only whether it becomes “not relevant” or “unreliable,” in light of limited scope upon which grounds of unpatentability may be based under 35 U.S.C. § 311(b), because the testimony is based on, or supported by, knowledge of physical devices and publications discussing physical devices. Patent Owner directs us to no support for the notion that an expert’s testimony in an inter partes review must be limited to only the prior art relied upon as grounds for unpatentability and may not take into account any knowledge of, or publications concerning, other “physical devices” that would have been known to a person of ordinary skill at the relevant time. See generally Mot.25 In sum, we find that Patent Owner has 25 Patent Owner improperly asserts for the first time in its Reply in support of the Motion that “Petitioner in this case is improperly relying on non-prior art evidence.” Mot. Reply 3. This argument was not made in the Motion, and Patent Owner fails to identify what “non-prior art evidence” it seeks to exclude. We recognize that Petitioner appears to raise the argument that “non-prior art evidence” may be relied upon by an expert, but Petitioner also fails to identify what evidence it is referring to and that argument was not responsive to any issue Patent Owner raised in the Motion. See Mot. Resp. 5. To the extent the Parties intend “non-prior art evidence” to refer to the testimony of Dr. Wieselthaler and Mr. Crosby, we view the issue as pertaining to the weight afforded that testimony, in light of the supporting evidence relied upon, rather than one of admissibility. for the exclusion of evidence in this proceeding and deny the Motion.” slip op. at 83

  • Skill levelOther

    “B. Level of Ordinary Skill in the Art In determining the level of ordinary skill in the art, various factors” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “D. Claim Construction In this proceeding we construe claims using the same claim” slip op. at 20

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “5. Rationale in Support of Asserted Combination Petitioner shows, and there is no dispute, that Bourque and Wampler” slip op. at 48

  Patent outcomesUS 11,351,356 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,351,356
• Abbott Laboratories v. Miracor Medical SANo claims unpatentable
  PTAB · Jun 11, 2026 · IPR2025-00116 · APJ John D Hamann · IPR · Final written decision

  The Board held claims 1–5, 7, 10, 16–24, 26, and 28 not unpatentable under any of the four § 103 grounds because the petition failed to prove required limitations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We find that the ’077 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of skill reflected in these references and in the ’077 patent is consistent with the definition of one of ordinary skill in the art proposed by Petitioner, which we adopt. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We further find that our determinations in this Decision would be the same if we were to instead adopt the level of skill proposed by Patent Owner.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We agree with Patent Owner that “axially adjacent” should be given its plain and ordinary meaning of “adjacent to one another as measured along a central axis.” PO Resp. 5–6; see also Ex. 2015 ¶¶ 73–79 (Mr. Leschinsky addressing the claim term “axially adjacent” and explaining that a person of ordinary skill would have understood it to mean that the “first magnetic device and the rotor are ‘adjacent’ to one another, i.e., disposed next to one another, as measured along the central axis about which the rotor spins”). Patent Owner’s construction also is supported by Petitioner’s expert, Mr. Crosby, who agrees that “adjacent to one another as measured along a central axis,” could be “one meaning,” along with “many other meanings.” Ex. 2014,8 19:13–20:11. In sum, consistent with our Institution Decision, we conclude that the plain and ordinary meaning of “axially adjacent” is “at a position adjacent to one another as measured along a central axis.” See Dec. on Inst. 12.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Second, for the reasons below, we determine that we do not need to construe any other claim terms to resolve the disputes between the parties. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (“[W]e need only construe” slip op. at 14

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We agree with Patent Owner. As we discuss above, we find “axially adjacent” to mean “adjacent to one another as measured along a central arguments that rest on Petitioner’s assertion that in the Parallel Litigation, Patent Owner “asserts that a magnetic element sealed within a rotor is . . . ‘axially adjacent.’” Id. at 20–21, n.6 (citing Ex. 1019, 5–7). In particular, we find unavailing Petitioner’s argument that Wampler teaches that magnetic pieces 88 (“a first magnetic device”) “are inserted [‘axially adjacent’] in…the impeller.” Id. at 20–21 (citing Ex. 1008 ¶ 80, Fig. 13; Ex. 1003 ¶ 174). We also find unavailing Petitioner’s reliance on Wampler’s Figure 13 and Mr. Crosby’s cited testimony that “the ‘impeller’ and ‘magnetic pieces’ are axially adjacent—situated next to each other on the same axis.” Id. at 21–22 (annotating Ex. 1008, Fig. 13; citing Ex. 1003 ¶¶ 174–176). Petitioner does not sufficiently explain this argument, but appears to conflate being adjacent along a central axis with about an axis. Id. We also find unavailing Petitioner’s argument that under Patent Owner’s construction, Wampler also teaches this limitation, because Patent Owner “concedes that ‘axially adjacent’ components ‘have positioning that is next to one another, perhaps touching or sharing a common side, when measured along the axis.’” Pet. Reply 14–15 (citing PO Resp. 14). Petitioner mischaracterizes Patent Owner’s arguments and ignores Patent Owner’s showing that “axially adjacent” components are “distinct from components that are aligned with one another such that they overlap or occupy the same portion of an axis upon which they are positioned.” PO Resp. 14 (citing Ex. 2015 ¶ 78). For the preceding reasons, Petitioner fails to show by a” slip op. at 24

  Patent outcomesUS 11,754,077 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,754,077
• Abbott Laboratories v. Miracor Medical SASome claims unpatentable
  PTAB · Jun 10, 2026 · IPR2025-00114 · APJ Annette R Reimers · IPR · Final written decision

  Claims 1, 2, 4, 5, 7, 8, 11, 12, 14–16, 18, and 19 are unpatentable under §103; claim 20 was not shown unpatentable.

  RulingsFinal written decision

  • Expert testimonyDenied

    “IV. PATENT OWNER’S MOTION TO EXCLUDE Patent Owner seeks to exclude portions of Dr. Wieselthaler’s Declaration (Exhibit 1041), portions of Mr. Crosby’s Reply Declaration (Exhibit 1042), portions of the deposition transcript of Dr. Wieselthaler (Exhibit 2028), and the exhibits “upon which that testimony is based” (Exhibits 1015, 1038, 1044, 1046, 1049, and 1050). Mot. 1. According to Patent Owner, the Motion was made “to preserve objections previously made in the record.” Id. (citations omitted). Patent Owner did not timely move to strike any of the evidence at issue as being outside the scope of reply evidence. Patent Owner asserts that because an inter partes review must be based on prior art consisting of patents or printed publications (citing 35 U.S.C. § 311(b)), the testimony of Mr. Crosby and Dr. Wieselthaler concerning “various physical devices allegedly known” to a person of ordinary skill in the art is inadmissible, along with all of the exhibits (consisting of printed materials such a journal abstracts, press releases, and papers) related to those physical devices. Id. at 3–4; see also Mot. Reply 1–4 (arguing that “devices that Petitioner’s witnesses assert were the basis of an inter partes review”). According to Patent Owner, Dr. Wieselthaler was unable to “link two of these physical devices to the printed prior art asserted in this [inter partes review], but those attempts fell apart during his cross examination.” Id. at 4. Patent Owner further reasons that because the evidence “cannot be the basis” of an inter partes review, it “has no tendency to make any fact of consequence in this trial more or less probable,” “is irrelevant and not admissible,” “presents substantial danger of confusing the issues, causing undue delay, and wasting time in this trial,” and “are not ‘based on sufficient facts[,] the product of reliable principles and methods[, or] ‘a reliable application of the principles and methods to the facts of the case.’” Id. at 7 (citing Fed. R. Evid. 401–403, 702) (modification in original). With regard to Exhibits 1015, 1038, 1044, 1046, 1049, and 1050, Petitioner argues, and we agree, that Patent Owner identifies no plausible legal theory for their inadmissibility based on the contention that they discuss physical devices. See Mot. Resp. 3. We also agree with Petitioner that the exhibits are not “the basis for any ground” asserted in this proceeding, and may be properly relied upon by Dr. Wieselthaler and Mr. Crosby as support for their rebuttal testimony directed to Patent Owner’s arguments disputing Petitioner’s asserted motivation to combine the prior art relied upon in the instituted grounds. See id. at 3–4. In regard to the disputed testimony of Dr. Wieselthaler and” slip op. at 77

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther

    “1. “magneto coupling” Claim 1 recites, in relevant part, “a second magnetic device . . . positioned to magnetically drive rotation of the magnetically driven rotor via a magneto coupling with the first magnetic device.” Ex. 1001, 5:34–37. Claim 11 recites, in relevant part, “the second magnetic device positioned axially closer to the first magnetic device than to the magnetically driven rotor so as to magnetically drive rotation of the magnetically driven rotor relative to the one or more walls via a magneto coupling with the first magnetic device.” Id. at 6:42–48. Petitioner argues that “magneto coupling” means “a transfer of torque from one rotating permanent magnetic component to another rotating permanent magnetic component via a magnetic field.” Pet. 8–9 (citing Ex. 1003 ¶¶ 68–87). According to Petitioner, this construction is consistent with the ’879 patent, which describes “a coupling between two rotating ‘bar magnets’—a drive wheel rotates one bar magnet which causes another bar magnet (connected to a rotor) to rotate.” Id. (citing Ex. 1003 ¶¶ 54–55 (analyzing Ex. 1001, 2:28–52, 4:44–64, Fig. 2)). Patent Owner argues that “magneto coupling” should be afforded “its plain and ordinary meaning, which would encompass a magnetic coupling through both rotating magnets and the use of a rotating magnetic Owner directs us to the testimony of Mr. Leschinsky, who explains that a person of ordinary skill in the art would have understood the ’879 patent to use “magneto coupling” to generally describe “a way to couple the rotor to a drive element while sealing the two from one another and avoiding use of a direct mechanical coupling.” Ex. 2015 ¶ 67. According to Patent Owner, “Petitioner provides no recognizable basis for limiting the plain meaning of magnetic coupling to one type of magnet and excluding another type of magnet.” PO Resp. 6–7 (citing Johnson Worldwide Associates, Inc., v. Zebco Corp., 175 F.3d 985, 989–992 (Fed. Cir. 1999)). We agree with Patent Owner that Petitioner does not provide a sufficient basis for limiting the plain meaning of “magneto coupling.” That the ’879 patent describes embodiments using bar magnets does not serve to require the use of permanent magnets for the recited “magneto coupling.” See Sisvel Int’l S.A. v. Sierra Wireless, Inc., 81 F.4th 1231, 1236 (Fed. Cir. 2023) (quoting Phillips, 415 F.3d at 1323 (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”)). Moreover, the claim language here is not so limited. 13 Patent Owner notes that Petitioner’s grounds of unpatentability based on Wampler and Bourque depend on the disclosure only of electromagnetic drives in each reference, implying that “Petitioner does not believe its own proposed narrower construction.” PO Resp. 6; see also Pet. 8 (Petitioner alleging that in the Parallel Proceeding Patent Owner “conflates ‘magneto coupling’ . . . with a stator drive using a stationary electromagnet, instead of a rotating magnet, to rotate the rotor magnet,” and asserting that as the basis for Petitioner’s reliance on Wampler and Bourque as teaching a “magneto coupling” in this proceeding (citing Ex. 1019, 7; Ex. 1003 ¶¶ 84–87)).” slip op. at 24

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableUnpatentable

    “reasons discussed above. See supra Section III.D.3. Accordingly, because Petitioner’s contentions are premised on an unsupported claim construction that we reject, Petitioner fails to show how Wampler teaches or suggests “a magnetically driven rotor . . . axially adjacent to a first magnet device,” as required by claims 1 and 11, as well as by claims 2, 4, 5, 7, 8, 11, 12, 14– 16, and 18–20, which depend from either claim 1 or claim 11. In its Reply, Petitioner suggests that “[u]nder [Patent Owner’s] construction from the [Patent Owner Response], Wampler also teaches or suggests this limitation,” because Patent Owner “concedes [that] ‘axially adjacent’ components ‘have” slip op. at 36

  Patent outcomesUS 11,572,879 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,572,879

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.