- Billerud Aktiebolag (Publ) v. Westrock MWV, LLCSome claims unpatentablePTAB · Mar 12, 2025 · IPR2023-01206 · APJ Elizabeth M Roesel · IPR · Final written decision
Claims 1, 2, and 4–22 are unpatentable as obvious; claim 23 was not shown unpatentable. Substitute claims 25–26 are allowed, while 24 and 27 are denied for lack of written-description support.
RulingsFinal written decision- Expert testimonyPetitioner expert discountedOther
“Exhibits 1013 and 1014 are also not admissible as expert testimony because Mr. Wirén is not “qualified as an expert by knowledge, skill, experience, training, or education.” Fed. R. Evid. 703. “To offer expert testimony from the perspective of a skilled artisan in a patent case—like for claim construction, validity, or infringement—a witness must at least have ordinary skill in the art. Without that skill, the witness’ opinions are neither relevant nor reliable.” Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). Mr. Wirén does not meet our definition of a person of ordinary skill in the art. See Section II.B, supra. That definition is based on the undisputed testimony of Messrs. Zotterman and Klass. Ex. 1003 ¶ 24; Ex. 2003 ¶ 26. Although Mr. Wirén has a Master’s of Science in chemical engineering, he lacks any experience or specialization in paperboard manufacturing. Ex. 2011, 12:1–10, 19:6–25, 20:2–7. We therefore agree with Patent Owner that Exhibits 1013 and 1014 are the testimony of Mr. Wirén and should be excluded from evidence because Mr. Wirén is not a person of ordinary skill in the relevant art. PO MTE 5–6, 9; Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362 (Fed. Cir. 2008) (“Unless a patent lawyer is also a qualified technical” slip op. at 61
- Skill levelSkill level board ownOther
“Level of Ordinary Skill in the Art Based on the testimony of the parties’ witnesses, we determine that a person of ordinary skill in the art would have had a bachelor’s degree in paper science and engineering, chemical engineering, process engineering, mechanical engineering, or a related degree, with three to five years of experience in paperboard manufacturing, or a master’s degree in paper science and engineering, chemical engineering, process engineering, or mechanical engineering, or a similar field with a specialization in paperboard manufacturing. Ex. 1003 ¶ 24; Ex. 2003 ¶ 26. We find that the level of ordinary skill in the art, as articulated above, is consistent with the level of technical understanding and competence reflected in the ’142 Patent Specification and the asserted prior art references.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed petitioner constructionDecided for petitioner
“A claim construction that excludes a particular element is viewed as a “negative limitation.” Ethicon LLC v. Intuitive Surgical, Inc., 847 Fed. App’x 901, 907 (Fed. Cir. Mar. 15, 2021). “[S]uch exclusions must find support either in ‘the words of the claim’ or through an ‘express disclaimer or independent lexicography in the written description that would justify adding that negative limitation.’” Id. (citing Omega Eng’g, Inc. v. Raytek Corp., 334 F.3d 1314, 1323 (Fed. Cir. 2003); CCS Fitness, Inc. v. Brunswick Corp., 288 F.3d 1359, 1366–67 (Fed. Cir. 2002)). “The standards for finding lexicography and disavowal are exacting.” GE Lighting Sols., LLC v. AgiLight, Inc., 750 F.3d 1304, 1309 (Fed. Cir. 2014). “To act as its own lexicographer, a patentee must ‘clearly set forth a definition of the disputed claim term,’ and ‘clearly express an intent to define the term.’” Id. (citing Thorner, 669 F.3d at 1365). Similarly, disclaimer or disavowal requires that the specification or prosecution history demonstrate that the invention does not include a particular feature. Id. Here, we find no claim language, lexicography, or disclaimer in the ’142 Patent or its file history that would support defining a “hot-hard calender” as requiring that only one of the two rollers be heated to an elevated temperature.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“a contact surface of said thermo-roller is heated to an elevated temperature of at least 250°F.” Petitioner shows persuasively that the temperature limitation is taught by the combination of Fugitt and Papermaking. Pet. 32–34. Fugitt discloses that “[t]he rolls of the calender may be steam heated.” Ex. 1004 ¶ 26. In a section titled “Heated Rolls,” Papermaking discloses that “Steam can be used up to 170°C [338°F] surface temperature.” Ex. 1010, 95, 98. Petitioner is thus correct that, “[w]hile Fugitt teaches that a hot calender may be steam heated, Papermaking clarifies that one of ordinary skill in the art would understand that steam heated thermo-rollers may reach up to 338°F.” Pet. 36. Based on these disclosures, we are persuaded by Mr. Zotterman’s testimony that it would have been “obvious to heat the thermo-roller of Fugitt to at least 250°F.” Ex. 1003 ¶ 159. combine Fugitt and Papermaking because of Papermaking’s status as a “trusted handbook[],” because both references disclose a method of manufacturing a paperboard structure with hot calendering,” and “because of the known advantages of heated rollers.” Pet. 36–37; Ex. 1003 ¶¶ 157, 159, 162. Petitioner’s contention is supported by Papermaking’s disclosures that, for cartonboard, “[p]recalendering is used before the coater to reduce roughness and porosity” and “[h]igh thermo roll temperatures (in some cases over 200°C) result in bulk savings because of the temperature gradient.” Ex. 1005, 80–82; see also Pet. 38; Ex. 1003 ¶ 164 (citing these disclosures). Papermaking’s disclosed range of “up to 170°C [338°F]” for steam- heated rolls (Ex. 1010, 98), overlaps the claimed range of “at least 250°F.” Patent Owner agrees. Tr. 27:11–13. “If the relevant comparison between a disputed claim limitation and the prior art pertains to a range of overlapping values, ‘. . . even a slight overlap in range establishes a prima facie case of obviousness.’” Genentech, Inc. v. Hospira, Inc., 946 F.3d 1333, 1341 (Fed. Cir. 2020) (citing In re Peterson, 315 F.3d 1325, 1329 (Fed. Cir. 2003)). “[S]uch an overlap creates a presumption of obviousness, and . . . the burden of production falls upon the patentee to come forward with pertinent evidence that the overlapping range would not have been obvious in light of the prior art.” Id. (citing E.I. DuPont de Nemours & Co. v. Synvina C.V., 904 F.3d 996, 1006, 1008 (Fed. Cir. 2018)). slip op. at 21
Patent outcomesUS 11,293,142 mixedClaim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 11,293,142 - Ecto World, LLC / Sv3, LLC v. Rai Strategic Holdings, Inc.Institution deniedPTAB · Mar 10, 2025 · PGR2024-00049 · APJ Jo-Anne M Kokoski · PGR · Institution
The Board denied institution because Petitioner did not show the patent was eligible for PGR; the challenged claims were supported by the 2006 priority application.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Accordingly, we determine that Petitioner does not demonstrate that it is more likely than not that the challenged claims lack written support in the Specification (and the ’634 application). That is, on this record, it appears that the challenged claims properly claim priority to the ’634 application and, accordingly, have an effective filing date in October 2006. 2. Conclusion: PGR Eligibility For the foregoing reasons, and based on the record before us, we determine that Petitioner has not demonstrated that it is more likely than not that the ’202 patent has, or had, at least one claim having an effective filing date on or after March 16, 2013. Accordingly, we determine that the ’202 patent is entitled to the filing date of the ’634 application (October 18, 2006), and, thus, the ’202 patent is not eligible for post-grant review.” slip op. at 18
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed board ownDecided for patent owner
“Accordingly, the ’202 patent consistently and repeatedly characterizes the invention as incorporating tobacco in some form and ties the stated benefits of the invention to the inclusion of tobacco. Moreover, the Specification is directed to smoking articles containing tobacco, all of the embodiments include tobacco, and “the present invention” is described as a smoking article, where the smoking article includes tobacco. Consequently, we determine that “smoking article” as it is used in the challenged claims is limited to devices that include tobacco. See Mosaic Brands, Inc. v. Ridge Wallet LLC, 55 F.4th 1354, 1361 (Fed. Cir. 2022) (finding claimed “lip” is limited to “extrudable plastic materials” where specification states that “the device of the present invention is constructed of extrudable plastic materials” and “emphasizes the benefits of using extrudable plastics and describes them as benefits of the invention as a whole”); Poly-Am., L.P. v. described in the specification has inwardly extended short seals and every section of the specification indicates the importance of inwardly extended short seals. These two facts provide together a proper reason to limit the claims in this way.”); Phillips v. AWH Corp., 415 F.3d 1303, 1312–1317 (Fed. Cir. 2005) (en banc) (“[T]he specification may reveal an intentional disclaimer, or disavowal, of claim scope by the inventor. In that instance as well, the inventor has dictated the correct claim scope, and the inventor’s intention, as expressed in the specification, is regarded as dispositive.”).” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateNot shown unpatentable
“Petitioner’s argument is dependent on accepting Petitioner’s assertion that the claims include a smoking article that does not contain tobacco, which we have not done. Instead, as set forth above, we construe “smoking article” as being limited to devices that include tobacco. See § II.B.2, supra. Based on our construction of “smoking article” and the evidence of record in this proceeding, we determine that the challenged claims are supported by the specification of the ’202 patent, which is identical to the specification of all of the continuations in the chain leading back to the October 18, 2006 that the specification of the ’202 patent and every patent in its priority chain “have identical specifications”); Prelim. Resp. 13 (noting that Petitioner does not identify other limitations in the challenged claims “allegedly lacking support in the ’202 patent family’s applications dating back to U.S. App. No. 11/550,634, filed on October 18, 2006”). Accordingly, we determine that Petitioner does not demonstrate that it is more likely than not that the challenged claims lack written support in the Specification (and the ’634 application). That is, on this record, it appears that the challenged claims properly claim priority to the ’634 application and, accordingly, have an effective filing date in October 2006.” slip op. at 17
Claim construction§ 112 disclosurecites PhillipsPatents in suitUS 11,925,202 - Ecto World, LLC / Sv3, LLC v. Rai Strategic Holdings, Inc.Institution deniedPTAB · Mar 6, 2025 · IPR2024-01280 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board denied institution of IPR challenging claims 1–30 because the asserted art was previously presented to the Office and Petitioner did not show material Office error.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dInstitution denied
“inter partes review, “the Director may take into account whether, and reject the petition or request because, the same or substantially the same prior art or arguments previously were presented to the Office.” The Board uses a two-part framework for evaluating arguments under § 325(d): (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of the first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of the challenged claims. Advanced Bionics, LLC v. MED-EL Elektromedizinische Geräte GmbH, IPR2019-01469, Paper 6 at 8 (PTAB Feb. 13, 2020) (precedential) (“Advanced Bionics”). In applying this framework, we consider the Becton, Dickinson1 factors that address discretion to deny institution when a petition presents the same or substantially the same prior art or arguments previously presented to the Office, including:” slip op. at 8
- Skill levelSkill level petitioner adoptedOther
“Petitioner contends that a person of ordinary skill in the art (“POSA”) would have had “a bachelor’s degree in electrical engineering, mechanical engineering, chemistry, physics, or an equivalent field, as well as 3–4 years of industry experience, or a master’s degree in the above fields, and 1–2 “[s]uch a POSA would have been familiar with electrically powered smoking articles and/or the components and underlying technology used therein.” Id. (citing Ex. 1003 ¶ 63. Patent Owner states that, for purposes of the Preliminary Response, “Patent Owner maintains that Petitioners’ arguments fail even under Petitioners’ POSA definition.” Prelim. Resp. 13. On this record, we preliminarily adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’202 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). B. Claim Construction” slip op. at 6
Discretionary denialcites PhillipsPatents in suitUS 11,925,202 - Tennant Company v. Oxygenator Water Technologies, Inc.No claims unpatentablePTAB · Feb 28, 2025 · IPR2021-00625 · APJ Kristina M Kalan · IPR · Remand
Claims 13, 14, and 17–27 were not shown unpatentable because Tennant did not establish that Wikey or Davies inherently disclosed the claimed microbubbles and nanobubbles.
RulingsRemand decision- RemandOther
“The Federal Circuit vacated and remanded our anticipation determinations as to claims 13, 14, and 17–27. Tennant, 11.1 The Federal Circuit further stated: “Because we vacate and remand to the Board to consider Tennant’s anticipation argument, we do not reach Tennant’s obviousness arguments (which depends on its contention that either Wikey or Davies produce nanobubbles).” Id. at 11. On September 19, 2024, we authorized the parties to file supplemental briefing, stating also that the “parties are not authorized to present new factual assertions, provide additional exhibits, or raise new arguments beyond those directed to the issues raised in the remand.” Ex. 3001. Pursuant to this authorization, Petitioner filed an Opening Brief on Remand (Paper 61; “Pet. Br. Rem.”) in support of its contentions. Patent Owner filed a Lead Brief on Remand (Paper 62; “PO Br. Rem.”) in support of its contentions. Petitioner filed a Reply Brief on Remand (Paper 66; “Pet. Reply Br. Rem.”). Patent Owner filed a Responsive Brief on Remand (Paper 65; “PO Resp. Br. Rem.”).” slip op. at 3
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureInherency not foundNot shown unpatentable
“Accordingly, and in line with our previous determination that “Wikey appears to disclose each limitation of claim 13 except ‘microbubbles and nanobubbles having a bubble diameter of less than 50 microns’” (Final Dec. 20), we determine that Petitioner has not demonstrated that Wikey inherently discloses microbubbles or nanobubbles. Accordingly, Petitioner has not demonstrated that Wikey discloses every limitation of claim 13.” slip op. at 56
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“The Federal Circuit vacated and remanded our anticipation determinations as to claims 13, 14, and 17–27. Tennant, 11.1 The Federal Circuit further stated: “Because we vacate and remand to the Board to consider Tennant’s anticipation argument, we do not reach Tennant’s obviousness arguments (which depends on its contention that either Wikey or Davies produce nanobubbles).” Id. at 11.” slip op. at 3
Patent outcomesUS RE45,415 not shown unpatentable§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham - PTAB · Feb 27, 2025 · IPR2024-01228 · APJ Kimberly Mcgraw · IPR · Institution
The Board instituted IPR on all challenged claims and all asserted grounds after finding a reasonable likelihood that claim 1 is unpatentable over Fukui.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“c) Conclusion Petitioner shows a reasonable likelihood that it would prevail in showing that claim 1 is unpatentable over Fukui. Accordingly, we institute inter partes review of all challenged calms based on all grounds asserted in the Petition. See SAS, 138 S.Ct. at 1354.” slip op. at 25
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDenied
“III. DISCRETION TO DENY INSTITUTION UNDER 35 U.S.C. § 325(d) Patent Owner argues that if the Board determines that Petitioner’s Fukui-based grounds 1 and 2 are deficient, then the Board should deny institution under § 325(d). Prelim. Resp. 26. In particular, Patent Owner asserts that remaining grounds 3 through 5 rely on art (i.e., Sauter) a reference that is substantially similar to art that was before the Examiner (i.e., Sedor). Id. at 26–27. Because we do not determine that Fukui-based grounds are deficient, we decline to exercise our discretion to deny institution under § 325(d).” slip op. at 31
- Skill levelSkill level petitioner adoptedDecided for petitioner
“time it was made, we consider the level of ordinary skill in the pertinent art at the time of the invention. Graham, 383 U.S. at 17. Petitioner contends that a person of ordinary skill in the art (“POSITA”) “would have a B.S. degree or equivalent in mechanical or electrical engineering or similar fields, in addition to a minimum of two years of professional experience with or graduate studies involving design, development, and/or utilization of optical communication systems.” Pet. 26. (citing Ex. 1003 ¶¶ 19–21). At this stage of the proceeding, Patent Owner neither responds to Petitioner’s proposed definition, nor provides a definition of its own. See Prelim. Resp. Petitioner’s undisputed proposed definition appears to be consistent with the cited prior art and the disclosure of the ’422 patent, and we adopt it for purposes of this Decision.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalTerm construed petitioner constructionDecided for petitioner
“Based on the present record, we agree with Petitioner that Patent Owner’s statements during prosecution are relevant to claim construction. Pet. 24–25. During prosecution of the parent application to the ’422 patent, Patent Owner stated, inter alia, that “a person of ordinary skill in the art would understand that the width of a cassette is simply the width of the cassettes from side to side and not some other ‘dimension’ such as the number of receptables or the like.” Ex. 1002, 187. Patent Owner further stated that it disagreed with the Examiner’s statement that paragraph 15 of the specification6 defines width in terms of the number of receptacles and that such a definition of width makes no sense in view of other claims where the standard with is defined in terms of a width of front edge of a tray on which the cassettes are secured. Id. We note that at this stage of the proceeding, Patent Owner has not provided any argument or evidence opposing Petitioner’s proposed construction or supporting the claim construction that it proposed during the district litigation. Our construction is preliminary and the parties are invited to address this claim construction more fully during trial.” slip op. at 13
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,656,422 - PTAB · Feb 27, 2025 · IPR2024-01382 · APJ Josiah C Cocks · IPR · Institution
The Board instituted IPR on claims 1–30 and all petition grounds, finding a reasonable likelihood of success based on Fukui’s teachings.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“A person of ordinary skill in the art (POSITA) would have a B.S. degree or equivalent in mechanical or electrical engineering or similar fields, in addition to a minimum of two years of professional experience with or graduate studies involving design, development, and/or utilization of optical communication systems. Pet. 24 (citing Ex. 1003 ¶¶ 19–21). Patent Owner does not dispute Petitioner’s assessment of the level of ordinary skill in the art, or offer its own assessment. Based on this record, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’423 patent and the asserted prior art, and we apply it in our patentability evaluations below. See also Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art, itself, can reflect appropriate level of ordinary skill in art).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“In this proceeding, Patent Owner does not dispute any of Petitioner’s contentions as to claim construction or offer any construction of its own for any term. We are mindful of Petitioner’s view that Patent Owner’s litigation construction is inconsistent with the plain language of the claims. We also question whether that construction adds clarity in seemingly substituting “width that accommodates” for “width,” and replacing “standard width units” with “receptable modules,” without, on this record, support for such word variations. Nevertheless, our determination whether to institute trial does not require resolution of any claim construction dispute or necessitate that we adopt any particular construction for any claim term. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 15
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this time, we find persuasive Petitioner’s position that Fukui’s teachings account for the pertinent “width” requirements of each of claims 1, 9, and 17. See, e.g., Pet. 30, 32–46. On this record, Dr. Ralph provides sufficient testimony that under either of the parties’ proposed constructions of the limitations involving cassette widths, Fukui’s teachings account for those limitations. See, e.g., Ex. 1003 ¶¶ 71–98.” slip op. at 24
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“Owner’s challenge to Petitioner’s Fukui-based grounds is whether, in Fukui, a conversion module (e.g., 20) that is formed by coupling together two unit modules establishes that conversion module as a new structure identifiable as a unitary cassette.11 We discern that Fukui uses the term “conversion module” to refer to component 10, and uses that same term, i.e., “conversion module” to refer to component 20. See, e.g., Ex. 1004, 6:33–35, 7:23–25. The components 10A and 10B that make-up conversion module 20 are characterized as each being a “unit module.” See, e.g., id. at 7:25–27. Thus, once unit modules 10A and10B are coupled together to form the structure that is “conversion module 20,” the current record reasonably suggests that the conversion module 20 is a component analogous to conversion module 10, but with a larger width, i.e., two times the width. Further, Fukui also characterizes unit modules 10A and 10B as being “fixed” to one another via coupling member 21 (see, e.g., id. at 10:11–16) forming “one body” (see, e.g., id. at 8:2–3). Further still, as described and shown in Fukui (e.g., Figure 5), conversion module 20 is structured to operate via a singular multicore optical connector 16 from which optical fibers F1 extend to all of the single-core optical connectors 17 of the conversion module. Id. at 7:52– 11 There is no dispute on this record that the term “module” as used in Fukui is analogous to the term “cassette” as used in the ’423 patent. 8:6. Thus, conversion module 20 is recognizable has having a singular system of fiber optic components within its body.” slip op. at 23
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 11,740,423 - PTAB · Feb 27, 2025 · IPR2024-01227 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted IPR on all grounds for claims 1–5 and 8–13, finding a reasonable likelihood that claim 8 is anticipated by Fukui and claims 1 and 8 are obvious over Fukui-based grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this preliminary stage, we determine whether the information presented shows a reasonable likelihood that Petitioner would prevail in establishing that at least one of the challenged claims would have been unpatentable over the proposed prior art. We analyze the asserted grounds with the above-noted principles in mind.” slip op. at 10
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached
“Patent Owner contends that we should deny institution under 35 U.S.C. § 325(d) “because the Petition presents ‘the same or substantially the same prior art or arguments previously . . . presented to the Office.’” Prelim. Resp. 25–31 (alteration in original). Specifically, Patent Owner explains, the Office previously considered Sedor during the ’542 patent’s prosecution, and Sauter was made of record but not considered during prosecution. Id. Patent Owner, however, states that it “recognizes that this argument only reaches Sauter-based grounds, not Fukui-based grounds. This argument thus only needs to be addressed after the Board confirms the fundamental deficiencies in Petitioner’s Fukui-based grounds.” Id. at 25 n.3. Because, as set forth below, we do not, on the present record, find any “fundamental deficiencies in Petitioner’s Fukui-based grounds” that inhibit institution of trial, we regard Patent Owner’s § 325 request as moot, and we need not consider it further.” slip op. at 10
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have [had] a B.S. degree or equivalent in mechanical or electrical engineering or similar fields, in addition to a minimum of two years of professional experience with or graduate studies involving design, development, and/or utilization of optical communication systems.” Pet. 26. On the present record, Patent Owner does not dispute this proposed level of skill. Prelim. Resp. 1–31. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’542 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“enough to resolve . . . the lead Fukui ground” but that “[t]here are two disputes relevant to the alternative Sauter ground.” Pet. 22. With respect to the first of these “disputes,” Petitioner presents two claim constructions for the claim term or phrase “cassette width as measured between outer side edges thereof of one of one, two, three, four and six standard width units.” Id. at 23. The constructions are said to be from “the co-pending litigation,” with one characterized as “Patent Owner’s proposed construction”6 and the other as “CommScope’s proposed construction.”7 Of note is Petitioner’s 6 The claim construction attributed to Patent Owner is: “cassette width as measured between the outer side edges thereof that accommodates one of one, two, three, four, or six receptable modules.” Pet. 23. 7 Petitioner’s construction is: “The cassette width as measured between the outer side edges thereof equals one, two, three, four, or six times the contention that “[Patent Owner]’s construction cannot be correct,” and accompanying explanation in that respect. Id. at 22–23, 24. Patent Owner acknowledges that there is a dispute between the parties as to the noted claim construction but urges that “[t]he Board, however, need not fully resolve this claim construction dispute,” as, in Patent Owner’s view, the grounds based on Sauter are deficient based on either construction. Prelim. Resp. 21–22. We are mindful of Petitioner’s view that Patent Owner’s litigation construction is not correct. We also question whether that construction adds clarity in substituting “width that accommodates” for “width of,” and replacing “standard width units” with “receptable modules,” without, on this record, support for such word variations. Nevertheless, our determination whether to institute trial does not require resolution of any claim construction dispute, nor does it necessitate that we adopt any particular construction for the pertinent claim term. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). We invite the parties to develop the record more fully on this claim- construction issue during trial.” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,435,542 - PTAB · Feb 27, 2025 · IPR2024-01218 · APJ Josiah C Cocks · IPR · Institution
The Board instituted IPR of claims 1–5 and 8–13 on all petitioned grounds, finding a reasonable likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute an inter partes review. The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a).” slip op. at 2
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“Stated somewhat generally, the core question underlying Patent Owner’s challenge to Petitioner’s Fukui-based grounds is whether a conversion module (e.g., 20) that is formed by coupling together two unit modules establishes that conversion module as a new structure identifiable as a unitary cassette. We discern that Fukui uses the term “conversion module” to refer to component 10, and uses that same term, i.e., “conversion module” to refer to component 20. See, e.g., Ex. 1004, 6:33–35, 7:23–25. The components 10A and 10B that make-up conversion module 20 are characterized as each being a “unit module.” See, e.g., id. at 7:25–27. Thus, once unit modules 10A and 10B are coupled together to form the structure that is “conversion module 20,” the current record reasonably suggests that the conversion module 20 is a component analogous to conversion module 10, but with a larger width, i.e., two times the width. Further, Fukui also characterizes unit modules 10A and 10B as being “fixed” to one another via coupling member 21 (see, e.g., id. at 10:11–16) and forming “one body” (see, e.g., id. at 8:2–3). Further still, as described and shown in Fukui (e.g., Figure 5), conversion module 20 is structured to operate via a singular multicore optical connector 16 from which optical fibers F1 extend to all of the single-core optical connectors 17 of the conversion module. Id. at 7:52– 8:6. Thus, conversion module 20 is recognizable has having a singular system of fiber optic components within its body. At this time, we regard such characterization of the coupled unit modules 10A and 10B as reasonably giving rise to an understanding that the resulting conversion module 20 constitutes a unitary module or cassette component.” slip op. at 20
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached
“IV. REQUEST FOR DENIAL UNDER 35 U.S.C. § 325 Patent Owner contends that the Board should exercise its discretion to deny under 35 U.S.C. § 325(d) on the theory that the Petitioner relies on substantially the same prior art and arguments that were previously considered by the Office. See Prelim. Resp. 31–37. Patent Owner, however, states the following: “Patent Owner recognizes that this argument only reaches Sauter-based grounds, not Fukui-based grounds. This argument thus only needs to be addressed after the Board confirms the fundamental deficiencies in Petitioner’s Fukui-based grounds.” Id. at 31, n.4. Because, as set forth above, we do not agree at this time as to any “fundamental deficiencies in Petitioner’s Fukui-based grounds” that inhibit institution of trial, we regard Patent Owner’s § 325 request as moot, and need not consider it further.” slip op. at 23
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“We are mindful of Petitioner’s view that Patent Owner’s litigation construction is not correct. We also question whether that construction adds clarity in substituting “width that accommodates” for “width of,” and replacing “standard width units” with “receptable modules,” without, on this record, support for such word variations. Nevertheless, our determination whether to institute trial does not require resolution of any claim construction dispute or necessitate that we adopt any particular construction for any claim term. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). 9 The claim construction attributed to Patent Owner is: “cassette width that accommodates one of one, two, three, four, or six receptable modules.” Pet. 21. 10 Petitioner’s construction is: “The cassette width equals one, two, three, four, or six times the standard width unit, without an additional amount. This means the cassette width must be evenly divisible by the standard width unit.” Pet. 21.” slip op. at 12
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 10,795,107 - Amphenol Corp. v. PPC Broadband, Inc.All claims unpatentablePTAB · Feb 19, 2025 · IPR2023-01363 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1, 2, and 10–13 are unpatentable as obvious over the stated combinations of Holmberg, Battey, Blankenship, and Cowen.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends a person of ordinary skill in the art “would have had at least a bachelor’s degree in electrical engineering, computer engineering, or a related field, and at least 1 year of experience related to communication networks or the equivalent.” Pet. 7. Petitioner further contends that “[a]dditional education could substitute for professional experience or significant experience in the field could substitute for formal education.” Id. at 7–8 (citing Ex. 1003 ¶¶ 29–31). Dr. Eldering agrees that one of ordinary skill in the art “would have had at least a bachelor’s degree in electrical engineering, computer engineering, or a related field, and at least one year of experience related to communication networks or the equivalent.” Ex. 2001 ¶ 24. According to Dr. Eldering, “[a] person with less relevant practical experience but with additional experience would also qualify.” Id. Patent Owner contends that” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Although Patent Owner disagrees with Petitioner’s construction, it contends “the Board need not resolve this claim construction dispute because Petitioner’s proposed grounds 1-5 are all insufficient under either construction.” PO Resp. 19. Upon review of the parties’ arguments and the prior art of record, we determine that no claim terms require express construction for purposes of this decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). For example, we discuss below in Section III.G why we do not reach the claim construction issue presented by Petitioner.” slip op. at 11
- Expert testimonyPetitioner expert creditedDecided for petitioner
“We find that Holmberg expressly contemplates using its wall box within multi-dwelling units, notes that multi-dwelling wall boxes in the prior art were “typically provided” on every floor, and discloses that the multi-dwelling wall boxes would contain optical couplings for each resident on a given floor. Ex. 1004 ¶¶ 7, 34; Pet. Reply 8–10. In view of these disclosures, we credit the testimony of Dr. Kiaei that one of ordinary skill in the art would have sought to use Holmberg’s wall box in multi-dwelling units and would have seen a need to access the area behind spice tray 230 to connect and disconnect subscribers. Ex. 1003 ¶ 92; Ex. 1033 ¶¶ 7–8. Moreover, even if Holmberg were limited to mid-span locations and distributing drop cables, as opposed to distribution cables for individual subscribers, as asserted by Patent Owner, Patent Owner does not dispute that a technician would still need periodic access to the area behind splice tray 230 in these mid-span devices. Tr. 38:3–39:1 (counsel agreeing that one would need to access the area behind splice tray 230 in Holmberg, albeit in “rare occasions”); Ex. 1003 ¶¶ 90–92; Ex. 1033 ¶¶ 7–8. Thus, whether used in the manner contemplated by Petitioner or Patent Owner, Petitioner persuasively demonstrates that access to the space behind splice tray 230 in Holmberg would be necessary. With access behind splice tray 230 required, Petitioner persuasively demonstrates that one of ordinary skill in the art would have seen a benefit to replacing Holmberg’s fasteners or screws with a hinged connection, such as that disclosed in Battey, to allow easier access to the area behind the splice tray. Pet. 41 (citing Ex. 1005 ¶ 39 (disclosing that a rotatable splice tray or shelf would “provide[] full and convenient access to the splice tray”)). First, Petitioner and Dr. Kiaei persuasively demonstrate that once the fibers of Holmberg are routed from behind splice tray 230 and the distribution cables spooled on this tray, a technician could not reasonably access fiber optic cables stored behind splice tray 230 without releasing or opening splice tray 230. Pet. Reply 14–15 (citing Ex. 1023, 60:20–61:15); Ex. 1033 ¶¶ 31–32. Second, Petitioner persuasively demonstrates that without a hinged connection, the technician would have to either hold the splice tray of Holmberg with one hand while performing the necessary routing and splicing steps, two screws would need to remain in place (essentially replicating a hinge), or the tray would have to be left to dangle, supported only by the routed and spliced fibers. Pet. Reply 19–20.” slip op. at 22
- Strike new argumentNew argument consideredDecided for petitioner
“Allegedly New Arguments on Reply Patent Owner contends that Petitioner’s arguments regarding the benefits of a hinged connection when performing the splicing and routing steps should be dismissed or ignored because they were improperly raised for the first time on reply. Sur-reply 19–20. We disagree. The Petition asserts that one of ordinary skill in the art would have sought to add a hinged connection, such as that disclosed in Battey, in Holmberg and would have seen a benefit to so doing. Pet. 40–44. Petitioner did not change its proposed combination or its stated rationale in its Reply. Rather, in response to Patent Owner’s counter-arguments, Petitioner expands upon the benefits of its proposed combination, i.e., the substitution of a hinged connection in place of fasteners. Pet. Reply 15–21. This is permissible, as a reply may properly expand on or extend previously raised arguments relating to the motivation to make the proposed changes to the prior art. See Rembrandt Diagnostics, LP v. Alere, Inc., 76 F.4th 1376, 1385 (Fed. Cir. 2023) (explaining that the reply arguments properly relied on the same legal ground, the same prior art references, and same legal argument—the motivation to make the proposed changes to the prior art reference).” slip op. at 25
Patent outcomesUS 9,008,483 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,008,483 - PTAB · Feb 19, 2025 · IPR2023-01424 · APJ Lynne H Browne · IPR · Final written decision
The Board canceled original claims 1–16 and 18–20 and denied substitute claims 21–39 because they broadened the challenged claims by removing the second-aperture limitation.
RulingsFinal written decision- ScopeMotion to amend granted in partGranted in part
“1. Statement of Law A motion to amend “may not enlarge the scope of the claims of the patent or introduce new matter.” 35 U.S.C. § 316(d)(3). “Before considering the patentability of any substitute claims . . . the Board first must determine whether the motion to amend meets the statutory and regulatory requirements set forth in § 316(d) and 37 C.F.R. § 42.121.” Lectrosonics, Inc. v. Zaxcom, Inc., IPR2018-01129, Paper 15 at 4 (PTAB Feb. 25, 2019) (precedential, “Lectrosonics”) (emphases added). This includes the prohibition against enlarging the scope of the claims. See Lectrosonics, at 6–7. “[T]he patent owner must satisfy the Board that the statutory criteria in [35 U.S.C.] § 316(d)(3) are met and that any reasonable procedural obligations imposed by the Director are satisfied.” Aqua Prods., Inc. v. Matal, 872 F.3d 1290, 1305–06 (Fed. Cir. 2017) (emphasis added) (lead plurality opinion by J. O’Malley); see also id. at 1341 (“There is no disagreement that the patent owner bears a burden of production in accordance [with] 35 U.S.C. § 316(d).”) (majority opinion by J. Reyna). Accordingly: “Any motion to amend may be denied where . . . [t]he amendment seeks to enlarge the scope of the claims of the patent.” 37 C.F.R. § 42.121(a)(2)(ii); see also PTAB Consolidated Trial Practice Guide (Nov. 2019), 69, 71.1 “[I]f a substitute claim is broader in any respect it is considered to be” slip op. at 8
- ExcludeNot reached
“We do not rule on Patent Owner’s Objection to Evidence Submitted with Petitioner’s Opposition to the Motion and Patent Owner’s Motion to Exclude Evidence, because we do not rely on the cited Evidence in formulating our Decision below.” slip op. at 3
Nonecites PhillipsPatents in suitUS 11,536,632
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.