• Fluidmaster, Inc. v. Danco, Inc.All claims unpatentable
  PTAB · Mar 11, 2026 · IPR2024-00635 · APJ Meredith C Petravick · IPR · Final written decision

  The majority held claims 1–14 unpatentable under §103 over Guoxin, Ho, and the Quick Connection Art; one judge dissented as to claims 8, 9, 12, and 13.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “A person of ordinary skill in the art (“POSITA”) with respect to the subject matter of the ’698 patent at the time of the priority date, March 11, 2004, would have had an undergraduate degree in mechanical engineering, or other technical training in product design or equivalent work experience. This person would also possess at least one year of experience in developing and/or evaluating mechanical aspects of fluid systems. I consider myself a person of ordinary skill in the art under this definition. Ex. 1004 ¶ 28. Patent Owner argues: A POSITA in the field to which the ’698 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or research experience in the design or development of toilet products, parts, and accessories. PO Resp. 6. We adopt Patent Owner’s proposed definition of a POSITA, as it is consistent with the ’698 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). However, we see no material difference between the level of skill proposed by Patent Owner and that proposed by Petitioner and Dr. Cameron such that our determinations would be the same under either proposed level of skill.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningDecided for petitioner

    “Patent Owner asserts that, because each of the Flow Limitations relate to water flow through the bowl fill valve, these limitations require adjusting the flow rate of water exiting the flow valve. PO Resp. 15–17 (citing Ex. 2013 ¶ 97); See also PO Sur-Reply 7. Petitioner responds that “the claim language of the ’698 Patent discusses adjusting the water flow, not specifically the ‘flow rate.’” Pet. Reply 13. We are not persuaded by Patent Owner, and the conclusory testimony of Mr. Jobin (Ex. 2013 ¶ 97), that because the Flow Limitations “relate” to water flow through the bowl fill valve, that this necessarily means that the flow rate must be adjusted. As Petitioner points out, neither the term “flowrate” nor any similar term appears in any of the Flow Limitations. Thus, the plain language of the Flow Limitations requires that, contrary to Patent Owner’s position, the claim limitation should not be restricted to adjustments to “flow rate.”” slip op. at 14

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “Petitioner argues that Limitations 8B and 12B are directed to the configuration or structure of the bowl fill valve outlet port. Pet. Reply 2–4. According to Petitioner, because Limitations 8B and 12B do recite an overflow tube, the overflow tube is not separately claimed and is recited solely to define the function of the outlet port on the bowl fill valve. Id. at 3. Petitioner, thus, argues that an overflow tube is not separately claimed as a structural element, and that, to meet Limitations 8B and 12B, it is sufficient to show that the prior art discloses a bowl fill valve with an outlet port that is configured to attach directly to a tube that provides water from the outlet port to an overflow tube. Id. at 4. In contrast, Patent Owner argues that Limitations 8B and 12B separately claim the overflow tube, and that Petitioner must show that the prior art discloses a tube that transfers water from the bowl fill valve outlet port to the toilet tank overflow tube. PO Resp. 10–11; PO Sur-reply 2–3. We disagree with Patent Owner, because claims 8 and 12, on their face, require “bowl fill valve outlet port,” but do not require or recite an “overflow tube” as an element of the claimed “bowl fill valve.” When a structure is claimed as “configured to” perform a particular function, it generally requires a structure that is designed to perform the particular function claimed, i.e., it requires more than the mere capability of performing that function. See Aspex Eyewear, Inc. v. Marchon Eyewear, Inc., 672 F.3d 1335, 1349 (Fed. Cir. 2012) (claim language including the phrase “adapted to” is to be construed consistent with “configured to” language and requires that the structure must be “designed or configured to accomplish the specified objective, not simply that [it] can be made to serve that purpose.”); see also In re Giannelli, 739 F.3d 1375, 1379 (Fed. Cir. 2014). The plain language of Limitations 8B and 12B is clearly directed to the configuration of the bowl fill valve outlet port, in that these limitations recite “a bowl fill valve outlet port configured to.”8 The recited function is “attach directly to a tube that provides water from the bowl fill valve outlet port to an overflow tube.” The overflow tube is recited as part of the function in a clause identifying the tube to which the bowl fill valve outlet port is configured to attached — “that provides water from the bowl fill valve outlet port to an overflow tube.” The overflow tube, thus, is recited as part of the function defining the required structure of the bowl fill outlet port and is not separately claimed.” slip op. at 16

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “1. Petitioner’s Contentions Petitioner contends that the combination of Guoxin, Ho, and the Quick Connection Art teaches all of the limitations of claims 1–14 and provides a mapping showing where each claim limitation is found in the prior art. Pet. 21–59. We have reviewed the Petition’s mapping and determine that the Petition sufficiently shows that each limitation of claims 1–14 is disclosed by the combination of Guoxin, Ho, and the Quick Connection Art. Further, we have reviewed Petitioner’s rationale for combining the prior art and determine that the Petition sufficiently shows that it would have been obvious to a POSITA to combine Guoxin, Ho, and the Quick Connection Art.” slip op. at 23

  Patent outcomesUS 10,934,698 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,934,698
• Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentable
  PTAB · Mar 5, 2026 · IPR2024-00634 · APJ Meredith C Petravick · IPR · Final written decision

  Claims 1, 3, 8–13, 15, 16, and 19–24 are unpatentable over Brown and Ho, with claims 16 and 19 also relying on the Quick Connection Art; the remaining challenged claims were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “Patent Owner proposes that: A [person of ordinary skill in the art (“POSITA”)] in the field to which the ’105 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “of “integrally molded with” as “molded together as a single structure.” Paper 21, 15.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “Patent Owner responds that: a POSITA would not have been motivated to make the proposed modification, nor does the Petition include any analysis regarding why a POSITA would be motivated to move from a vertical extended portion to a radial extended portion. Indeed, a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar as it introduces another sudden directional change into the fluid flow system. PO Resp. 58–59 (citing Ex. 2013 ¶ 242).” slip op. at 32

  • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner

    “Patent Owner argues that the ’105 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 63–65; PO Sur-reply 26–29. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 of the bowl fill valve 109, the flow of water through the bowl fill valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288. Further, the ’606 Application states: The bowl fill valve 109 may be, for example, a ball valve, a gate valve, a globe valve, a plug valve, a diaphragm valve, a butterfly valve, a needle valve, a sliding gate, a quick turn valve, a knife valve or any other appropriate type of valve as can be appreciated by those with ordinary skill in the art.” slip op. at 42

  Patent outcomesUS 9,103,105 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 9,103,105
• Mobileye Global, Inc. / ZF Active Safety And Electronics US LLC v. Facet Technology Corp.Some claims unpatentable
  PTAB · Jan 23, 2026 · IPR2025-00749 · APJ Sean P O’Hanlon · IPR · Final written decision

  Claims 1–4 and 8–13 are unpatentable as obvious over Gallagher and Schofield; claims 5–7 and 14–16 were not shown unpatentable on the asserted combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “skilled artisan would have, with Petitioner contending four years and Patent Owner contending two years. Patent Owner’s witness, Dr. Papanikolopoulos, does not provide an explanation for his opinion or support his definition of the level of ordinary skill with citations to evidence. See Ex. 2023 ¶ 57 (“In my opinion, [Petitioner’s definition] is an excessive level of ordinary skill in the art, and I believe instead [an ordinarily skilled artisan] would more likely have two years of experience rather than four years.”). On the other hand, Petitioner’s witness, Dr. Thorpe, does provide an explanation for his opinion, explaining that his assertion that four years of experience is required is based on the state of the art, typical undergraduate curricula, and his supervision of doctoral students. Ex. 1030 ¶ 21. Based on the arguments presented and the cited references, we find Petitioner’s definition of the level of ordinary skill reasonable and for purposes of this Decision, adopt it as our own. We note that we would reach the same conclusions under either proposed standard.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “As a general rule, unless the steps of a method claim actually recite an order, the steps are not ordinarily construed to require one.” Mformation Techs., Inc. v. Rsch. in Motion Ltd., 764 F.3d 1392, 1398 (Fed. Cir. 2014) (citation modified). “However, a claim requires an ordering of steps when the claim language, as a matter of logic or grammar, requires that the steps be performed in the order written, or the specification directly or implicitly requires an order of steps.” Id. (cleaned up). “[O]rdinarily in process claims steps taken concurrently are the equivalent of steps taken successively.” In re White, 39 F.2d 974, 975 (CCPA 1930); see also Cybersettle, 243 F. App’x. at 609 (finding “the step of calculating the differences between demands and offers can occur concurrently with the [next enumerated step of] receipt of multiple demands and offers” and “the testing step of ‘determining whether any of the differences fall within the predetermined settlement range’ may occur concurrently with the receipt and comparison of the bids” (citation modified)). This is especially true here, given that the recitations at issue are functional language in an apparatus (system) claim. We further agree with Petitioner that the ’328 patent discloses such concurrent performance of these steps: Either concurrent with or subsequent to the identification of road signs 30 and generation of asset management database 24, the computer processor 22 evaluates that portion 32 of each video frame or image that depicts a road sign 30 to determine a set of color values 40, 42 for each of a plurality of colors on the road sign 32. A retroreflectivity value is generated for each color portion 34, 36 on each frame of the tagged videostream 20 containing the road sign 30 that represents a different color value 40, 42. slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Petitioner is correct to the extent that it need not show that “the features of [Schofield] may be bodily incorporated into the structure of [Gallagher],” but Petitioner must prove that “a skilled artisan would have been motivated to combine the teachings of the prior art references to achieve the claimed invention.” Allied Erecting, 825 F.3d at 1381. For claim 9, Petitioner proposes to modify Gallagher’s system to use “Schofield’s determination of a light source’s location within a field of view” in Gallagher’s system. Pet. 23. Thus, Petitioner’s combination does not require the combination of Gallagher’s and Schofield’s sensors into a single system, and Patent Owner’s “sensor fusion” argument is inapposite. See Tr. 48:8–49:6 (Patent Owner’s counsel confirming that the problem of “sensor fusion” stems from combining disparate sensors in a single system). As noted above, Schofield teaches considering the relative location of the light source in determining whether the light source is from headlights or taillights (that is, an object of interest). See Ex. 1006, 9:26–35. We are persuaded that an ordinarily skilled artisan would be motivated to use this teaching in Gallagher’s device to help distinguish between road markers that are arranged side-by-side and have a reasonable expectation of success in doing so. See Ex. 1005 ¶ 40; Ex. 1003 ¶¶ 77 (“[An ordinarily skilled artisan] would have seen Schofield’s determination of a light source’s location within the field of view as advantageous because it would have allowed Gallagher’s computer to associate the measured reflectance level with the appropriate road marker.”), 79 (“[I]mplementing this determination would have required [an ordinarily skilled artisan] to implement only conventional techniques of image processing (identifying a location of a particular pixel within an array), which was well known by [an ordinarily skilled artisan], to predictably yield the result of the location within a field of view indicating an intensity value associated with a road marker. Given that Schofield and Gallagher disclose similar types of arrays, this combination would have merely required the use of Schofield’s known technique to improve Gallagher’s similar device in the same way.”).” slip op. at 30

  • Obviousness (§103) › Analogous artNon analogous artNot shown unpatentable

    “A reference qualifies as prior art for a determination under § 103 when it is analogous to the claimed invention. In re Clay, 966 F.2d 656, 658 (Fed. Cir. 1992). Two separate tests define the scope of analogous prior art: (1) whether the art is from the same field of endeavor, regardless of the problem addressed, and (2) if the reference is not within the field of the inventor’s endeavor, whether the reference still is reasonably pertinent to the particular problem with which the inventor is involved. In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004) (citing In re Deminski, 796 F.2d 436, 442 (Fed. Cir. 1986)).” slip op. at 49

  Patent outcomesUS 9,671,328 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,671,328
• Mobileye Global, Inc. / ZF Active Safety And Electronics US LLC v. Facet Technology Corp.Some claims unpatentable
  PTAB · Jan 23, 2026 · IPR2024-01111 · APJ Sean P O’Hanlon · IPR · Final written decision

  Claims 1–4 and 8–13 are unpatentable as obvious over Gallagher and Schofield; claims 5–7 and 14–16 were not shown unpatentable on the asserted grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties disagree only on the length of experience an ordinarily skilled artisan would have, with Petitioner contending four years and Patent Owner contending two years. Patent Owner’s witness, Dr. Papanikolopoulos, does not provide an explanation for his opinion or support his definition of the level of ordinary skill with citations to evidence. See Ex. 2023 ¶ 57 (“In my opinion, [Petitioner’s definition] is an excessive level of ordinary skill in the art, and I believe instead [an ordinarily skilled artisan] would more likely have two years of experience rather than four years.”). On the other hand, Petitioner’s witness, Dr. Thorpe, does provide an explanation for his opinion, explaining that his assertion that four years of experience is required is based on the state of the art, typical undergraduate curricula, and his supervision of doctoral students. Ex. 1030 ¶ 21. Based on the arguments presented and the cited references, we find Petitioner’s definition of the level of ordinary skill reasonable and for purposes of this Decision, adopt it as our own. We note that we would reach the same conclusions under either proposed standard.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITANo construction needed

    “As a general rule, unless the steps of a method claim actually recite an order, the steps are not ordinarily construed to require one.” Mformation Techs., Inc. v. Rsch. in Motion Ltd., 764 F.3d 1392, 1398 (Fed. Cir. 2014) (citation modified). “However, a claim requires an ordering of steps when the claim language, as a matter of logic or grammar, requires that the steps be performed in the order written, or the specification directly or implicitly requires an order of steps.” Id. (cleaned up). “[O]rdinarily in process claims steps taken concurrently are the equivalent of steps taken successively.” In re White, 39 F.2d 974, 975 (CCPA 1930); see also Cybersettle, 243 F. App’x. at 609 (finding “the step of calculating the differences between demands and offers can occur concurrently with the [next enumerated step of] receipt of multiple demands and offers” and “the testing step of ‘determining whether any of the differences fall within the predetermined settlement range’ may occur concurrently with the receipt and comparison of the bids” (citation modified)). This is especially true here, given that the recitations at issue are functional language in an apparatus (system) claim. We further agree with Petitioner that the ’328 patent discloses such concurrent performance of these steps: Either concurrent with or subsequent to the identification of road signs 30 and generation of asset management database 24, the computer processor 22 evaluates that portion 32 of each video frame or image that depicts a road sign 30 to determine a set of color values 40, 42 for each of a plurality of colors on the road sign 32. A retroreflectivity value is generated for each color portion 34, 36 on each frame of the tagged videostream 20 containing the road sign 30 that represents a different color value 40, 42. Ex. 1001, 5:52–60. Thus, the ’328 patent discloses concurrently detecting objects of interest (road signs) and determining whether the object of interest has a particular color value. slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Petitioner is correct to the extent that it need not show that “the features of [Schofield] may be bodily incorporated into the structure of [Gallagher],” but Petitioner must prove that “a skilled artisan would have been motivated to combine the teachings of the prior art references to achieve the claimed invention.” Allied Erecting, 825 F.3d at 1381. For claim 9, Petitioner proposes to modify Gallagher’s system to use “Schofield’s determination of a light source’s location within a field of view” in Gallagher’s system. Pet. 23. Thus, Petitioner’s combination does not require the combination of Gallagher’s and Schofield’s sensors into a single system, and Patent Owner’s “sensor fusion” argument is inapposite. See Tr. 48:8–49:6 (Patent Owner’s counsel confirming that the problem of “sensor fusion” stems from combining disparate sensors in a single system). As noted above, Schofield teaches considering the relative location of the light source in determining whether the light source is from headlights or taillights (that is, an object of interest). See Ex. 1006, 9:26–35. We are persuaded that an ordinarily skilled artisan would be motivated to use this teaching in Gallagher’s device to help distinguish between road markers that are arranged side-by-side and have a reasonable expectation of success in doing so. See Ex. 1005 ¶ 40; Ex. 1003 ¶¶ 77 (“[An ordinarily skilled artisan] would have seen Schofield’s determination of a light source’s location within the field of view as advantageous because it would have allowed Gallagher’s computer to associate the measured reflectance level with the appropriate road marker.”), 79 (“[I]mplementing this determination would have required [an ordinarily skilled artisan] to implement only conventional techniques of image processing (identifying a location of a particular pixel within an array), which was well known by [an ordinarily skilled artisan], to predictably yield the result of the location within a field of view indicating an intensity value associated with a road marker. Given that Schofield and Gallagher disclose similar types of arrays, this combination would have merely required the use of Schofield’s known technique to improve Gallagher’s similar device in the same way.”).” slip op. at 30

  • Expert testimonyPatent owner expert discountedOther

    “The parties disagree only on the length of experience an ordinarily skilled artisan would have, with Petitioner contending four years and Patent Owner contending two years. Patent Owner’s witness, Dr. Papanikolopoulos, does not provide an explanation for his opinion or support his definition of the level of ordinary skill with citations to evidence. See Ex. 2023 ¶ 57 (“In my opinion, [Petitioner’s definition] is an excessive level of ordinary skill in the art, and I believe instead [an ordinarily skilled artisan] would more likely have two years of experience rather than four years.”). On the other hand, Petitioner’s witness, Dr. Thorpe, does provide an explanation for his opinion, explaining that his assertion that four years of experience is required is based on the state of the art, typical undergraduate curricula, and his supervision of doctoral students. Ex. 1030 ¶ 21. Based on the arguments presented and the cited references, we find Petitioner’s definition of the level of ordinary skill reasonable and for purposes of this Decision, adopt it as our own. We note that we would reach the same conclusions under either proposed standard.” slip op. at 11

  Patent outcomesUS 9,671,328 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,671,328
• Mobileye Global, Inc. / ZF Active Safety And Electronics US LLC v. Facet Technology Corp.No claims unpatentable
  PTAB · Jan 23, 2026 · IPR2025-00748 · APJ Sean P O’Hanlon · IPR · Final written decision

  Claim 15 was not shown unpatentable under § 103 over Gallagher and Lumia because Petitioner did not persuasively explain why a skilled artisan would combine their teachings.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties disagree only on the length of experience an ordinarily skilled artisan would have, with Petitioner contending four years and Patent Owner contending two years. As noted by Petitioner, Patent Owner’s witness, Dr. Papanikolopoulos, does not provide an explanation for his opinion or support his definition of the level of ordinary skill with citations to evidence. See Ex. 2023 ¶ 57 (“In my opinion, [Petitioner’s definition] is an excessive level of ordinary skill in the art, and I believe instead [an ordinarily skilled artisan] would more likely have two years of experience rather than four years.”). On the other hand, Petitioner’s witness, Dr. Thorpe, does provide an explanation for his opinion, explaining that his assertion that four years of experience is required is based on the state of the art, typical undergraduate curricula, and his supervision of doctoral students. Ex. 1030 ¶ 23. Based on the arguments presented and the cited references, we find Petitioner’s definition of the level of ordinary skill reasonable and for purposes of this Decision, adopt it as our own. We note that we would reach the same conclusions under either proposed standard.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (alteration in original) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). For purposes of this Decision, we determine that no construction of any term is necessary. slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Petitioner has not articulated persuasive reasoning for combining the teachings of Gallagher and Lumia. Petitioner argues that implementing Lumia’s teaching of determining the luminance of traffic signs in Gallagher’s system would allow Gallagher’s system to calculate the retroreflectivity of road markers as a means of identifying any markers that do not meet minimum acceptable reflectance levels for countries that require a minimum retroreflectivity level for road markers. Pet. 46 (citing Ex. 1003 ¶ 116; Ex. 1005 ¶¶ 49, 77; Ex. 1019, 6, 8–11).7 However, Gallagher already discloses determining whether the 7 Petitioner and Dr. Thorpe cite to the original pagination of Exhibit 1019 rather than the added exhibit pagination. reflectance level of each road marker meets a predetermined minimum acceptable reflectance level and tagging those road markers that do not meet the minimum acceptable reflectance level to identify them for replacement. See, e.g., Ex. 1005 ¶¶ 3, 67–68; see also id. ¶¶ 12–13, 18, 21, 49, 51, 76, 79, Fig. 5. Indeed, both Petitioner and Dr. Thorpe describe Gallagher’s system as ensuring that road markers meet minimum retroreflectivity standards: “Gallagher’s apparatus tests ‘road markings and road markers such as, for example, road signs and posts, reflective painted lines whether continuous or broken, and . . . raised pavement markers’ ‘to ensure they continue to meet minimum standards of reflectivity/retroreflectivity.’” Pet. 9 (alteration in original) (emphasis added) (citing Ex. 1005 ¶¶ 3, 6, 31–33); Ex. 1003 ¶ 55 (alteration in original) (emphasis added) (citing Ex. 1005 ¶¶ 3, 6, 31–33). Thus, we agree with Patent Owner that Petitioner has not identified persuasively why an ordinarily skilled artisan would have modified Gallagher’s system to include Lumia’s process for measuring retroreflectivity of traffic signs.” slip op. at 19

  • Strike new argumentNew argument disregardedDecided for patent owner

    “coefficient of luminous intensity rather than the coefficient of retroreflectivity, and Lumia teaches how to calculate retroreflectivity based on the coefficient of luminance intensity. Pet. Reply 20–21. During the hearing, counsel for Petitioner clarified that this reliance on Lumia entails using the equations disclosed in Lumia without altering Gallagher’s hardware. Tr. 27:18–29:24. During his deposition , Dr. Thorpe confirmed that this obviousness theory relies only on Lumia’s equations. See Ex. 2025, 60:5–65:2. This is an improper new argument. See, e.g., Henny Penny Corp. v. Frymaster LLC, 938 F.3d 1324, 1330–31 (Fed. Cir. 2019) (“[A]n IPR petitioner may not raise in reply ‘an entirely new rationale’ for why a claim would have been obvious.”). Notably, this new obviousness theory appears to stem from Patent Owner’s witness, Dr. Papanikolopoulos, noting differences in Gallagher’s and Lumia’s disclosures. See Pet. Reply 21 (citing Ex. 2023 ¶¶ 71 n.2, 89). Even considering Petitioner’s new theory, we find it unpersuasive because Petitioner does not explain adequately how the “determining a luminance value” recitation is met. Per Petitioner, Gallagher measures the coefficient of luminous intensity, but Petitioner does not identify a “luminance value” as recited in claim 15. Dr. Papanikolopoulos testifies that the coefficient of luminous intensity is not a luminance value: “As is well established, coefficient of luminous intensity—which is what Gallagher calculates—is a measurement of retroreflectivity (usually expressed in units of candelas, or millicandelas, per lux per square meter, i.e., cd/lx/m2), not luminance (usually expressed in candelas per square meter, i.e., cd/m2). Ex. 2023 ¶ 91. Petitioner’s witness, Dr. Thorpe, does not contest this testimony. See, e.g., Ex. 1030 ¶ 35. Thus, Petitioner’s new theory is unpersuasive.” slip op. at 20

  Patent outcomesUS 9,335,255 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,335,255
• Mobileye Global, Inc. / ZF Active Safety And Electronics US LLC v. Facet Technology Corp.No claims unpatentable
  PTAB · Jan 23, 2026 · IPR2024-01110 · APJ Sean P O’Hanlon · IPR · Final written decision

  Claim 15 was not shown unpatentable under § 103 over Gallagher and Lumia because Petitioner did not persuasively explain why a skilled artisan would combine their teachings.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties disagree only on the length of experience an ordinarily skilled artisan would have, with Petitioner contending four years and Patent Owner contending two years. As noted by Petitioner, Patent Owner’s witness, Dr. Papanikolopoulos, does not provide an explanation for his opinion or support his definition of the level of ordinary skill with citations to evidence. See Ex. 2023 ¶ 57 (“In my opinion, [Petitioner’s definition] is an excessive level of ordinary skill in the art, and I believe instead [an ordinarily skilled artisan] would more likely have two years of experience rather than four years.”). On the other hand, Petitioner’s witness, Dr. Thorpe, does provide an explanation for his opinion, explaining that his assertion that four years of experience is required is based on the state of the art, typical undergraduate curricula, and his supervision of doctoral students. Ex. 1030 ¶ 23. Based on the arguments presented and the cited references, we find Petitioner’s definition of the level of ordinary skill reasonable and for purposes of this Decision, adopt it as our own. We note that we would reach the same conclusions under either proposed standard.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (alteration in original) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). For purposes of this Decision, we determine that no construction of any term is necessary. slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Petitioner has not articulated persuasive reasoning for combining the teachings of Gallagher and Lumia. Petitioner argues that implementing Lumia’s teaching of determining the luminance of traffic signs in Gallagher’s system would allow Gallagher’s system to calculate the retroreflectivity of road markers as a means of identifying any markers that do not meet minimum acceptable reflectance levels for countries that require a minimum retroreflectivity level for road markers. Pet. 46 (citing Ex. 1003 ¶ 116; Ex. 1005 ¶¶ 49, 77; Ex. 1019, 6, 8–11).7 However, Gallagher already discloses determining whether the 7 Petitioner and Dr. Thorpe cite to the original pagination of Exhibit 1019 rather than the added exhibit pagination. reflectance level of each road marker meets a predetermined minimum acceptable reflectance level and tagging those road markers that do not meet the minimum acceptable reflectance level to identify them for replacement. See, e.g., Ex. 1005 ¶¶ 3, 67–68; see also id. ¶¶ 12–13, 18, 21, 49, 51, 76, 79, Fig. 5. Indeed, both Petitioner and Dr. Thorpe describe Gallagher’s system as ensuring that road markers meet minimum retroreflectivity standards: “Gallagher’s apparatus tests ‘road markings and road markers such as, for example, road signs and posts, reflective painted lines whether continuous or broken, and . . . raised pavement markers’ ‘to ensure they continue to meet minimum standards of reflectivity/retroreflectivity.’” Pet. 9 (alteration in original) (emphasis added) (citing Ex. 1005 ¶¶ 3, 6, 31–33); Ex. 1003 ¶ 55 (alteration in original) (emphasis added) (citing Ex. 1005 ¶¶ 3, 6, 31–33). Thus, we agree with Patent Owner that Petitioner has not identified persuasively why an ordinarily skilled artisan would have modified Gallagher’s system to include Lumia’s process for measuring retroreflectivity of traffic signs.” slip op. at 19

  • Strike new argumentNew argument disregardedDecided for patent owner

    “coefficient of luminous intensity rather than the coefficient of retroreflectivity, and Lumia teaches how to calculate retroreflectivity based on the coefficient of luminance intensity. Pet. Reply 20–21. During the hearing, counsel for Petitioner clarified that this reliance on Lumia entails using the equations disclosed in Lumia without altering Gallagher’s hardware. Tr. 27:18–29:24. During his deposition , Dr. Thorpe confirmed that this obviousness theory relies only on Lumia’s equations. See Ex. 2025, 60:5–65:2. This is an improper new argument. See, e.g., Henny Penny Corp. v. Frymaster LLC, 938 F.3d 1324, 1330–31 (Fed. Cir. 2019) (“[A]n IPR petitioner may not raise in reply ‘an entirely new rationale’ for why a claim would have been obvious.”). Notably, this new obviousness theory appears to stem from Patent Owner’s witness, Dr. Papanikolopoulos, noting differences in Gallagher’s and Lumia’s disclosures. See Pet. Reply 21 (citing Ex. 2023 ¶¶ 71 n.2, 89).” slip op. at 20

  Patent outcomesUS 9,335,255 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,335,255
• Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentable
  PTAB · Dec 15, 2025 · IPR2024-00633 · APJ Meredith C Petravick · IPR · Final written decision

  Claims 1, 7–15, 19, and 20 are unpatentable over Brown and Ho; claims 2–6 and 16–18 were not shown unpatentable on the asserted grounds.

  RulingsFinal written decision

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “Brown’s adapter tube 23 (i.e., the extended portion) does not extend radially from a longitudinal axis of valve assembly 13 (i.e., the toilet fill valve). Ex. 1021, Fig. 1. Mr. Jobin testifies that a POSITA would not be motivated to move adapter tube 23 from a vertical position to a radial position because “a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar system.” Ex. 2013 ¶ 251; see Ex. 1021, 1:9–62. Patent Owner’s argument is persuasive. Petitioner’s analysis and Dr. Cameron’s testimony is conclusory and does not sufficiently explain why a POSITA would be motivated to make the proposed modification to Brown. For example, Petitioner does not sufficiently explain how such a modification would result in a more compact toilet fill valve system that could be adapted to fit in more toilet tank designs. Further, neither Petitioner nor Dr. Cameron sufficiently address Mr. Jobin’s testimony regarding Brown’s desire for a quieter toilet. See Pet. Reply 23; Ex. 1036 ¶ 84. Petitioner fails to meet its burden to show by a preponderance of the evidence that claim 2 is unpatentable over Brown and Ho.” slip op. at 35

  • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner

    “description is an objective inquiry into the four corners of the specification from the perspective of a POSA. Using this test, the invention must be described in a manner sufficient to demonstrate that the inventor actually invented the claimed invention. Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010). “One shows that one is ‘in possession’ of the invention by describing the invention, with all its claimed limitations, not that which makes it obvious.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). Written description is a question of fact judged as of the relevant filing date. Falko–Gunter Falkner v. Inglis, 448 F.3d 1357, 1363 (Fed. Cir. 2006). An ipsis verbis disclosure, however, is not necessary to satisfy the written description requirement. Vas–Cath Inc. v. Mahurkar, 935 F.2d 1555, 1563 (Fed. Cir. 1991). The disclosure need only reasonably convey to a POSA that the inventor had possession of the subject matter in question, even if every nuance of the claims is not explicitly described in the specification. Id.; see Ariad, 598 F.3d at 1351. Patent Owner argues that the ’993 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 68; PO Sur-reply 28–30. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. Ex. 1012, 47, ¶ 8 (emphasis added); see also Ex. 1001, 2:28–39. As can be seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288.” slip op. at 48

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artNot shown unpatentable

    “1. Analysis of Claims 1–18 Schuster is available as prior art if the ’993 patent is only entitled to its January 27, 2014, filing date and not entitled to claim priority to earlier filing dates of the parent applications. On its face, the ’993 patent claims priority to a number of earlier parent applications, including Application No. 12/786,904 (the ’904 Application) filed May 25, 2010, and the Application code 63. Petitioner contends that the ’993 patent is not entitled to claim priority to the filing date of the earlier parent applications, and, thus, Schuster, a parent application of the ’993 patent, is available as prior art.15 Pet. 91–92. Petitioner alleges that the earlier parent applications, specifically Application No. 12/786,904 (the ’904 Application), do not provide written description support for the ’993 patent’s claim term “water flow regulator.” According to Petitioner, “water flow regulator” encompasses both adjustable devices for restricting the flow of water (i.e., valves) and fixed devices for restricting the flow of water (i.e., restrictors). Pet. 15. Petitioner contends that the ’904 Application does not provide support for water flow restrictors and, thus, does not provide support for the broader claim term water flow regulators. Id. at 14–15, 91–92. Petitioner argues that only adjustable water flow devices (i.e., valves) are supported by the ’904 Application. Id. Petitioner, thus, asserts that earliest effective filing date of the ’993 patent’s claims is the filing date of its application, January 27, 2014. Id. at 92. To be entitled to claim the benefit of an earlier filing date under 35 U.S.C. § 120 each application in the priority chain must comply with the written description requirement of 35 U.S.C. § 112(a). See Hollmer v. 14 The parties do not dispute that the ’993 patent and the earlier parent applications, including the ’904 Application and the ’606 Application, have the same pertinent portions of their specifications. See PO Resp. 71, n.16; Ex. 1004 ¶ 324. 15 Schuster issued on January 31, 2012, from Application No. 12/786,904, filed on May 25, 2010. Ex. 1029, code (21), (22), (45). Schuster, thus, issued more than one year prior to January 27, 2014.” slip op. at 46

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentable

    “2. Analysis of Claims 19 and 20 Claim 19 depends from claim 14 and additionally recites, “wherein the waterflow regulator comprises an adjustable water flow regulator that is configured to adjust the flow rate of the second portion of the water based at least in part on a setting of the adjustable water flow regulator.” Ex. 1001, 12:16–20. Claim 20 depends from claim 14 and recites the same additional limitation. Id. at 12:21–24. Claims 19 and 20, thus, require the water flow regulator to be an adjustable water flow regulator. Petitioner indicates that the earlier parent applications provide written description support for an adjustable water flow regulator. Pet. 91 (“[T]he ’904 application specification makes it clear that the adjustability of the bowl fill valve is a desirable and essential feature of the invention”); PO Surreply 28. Accordingly, Petitioner fails to meet its burden to show, by a preponderance of the evidence, that claims 19 and 20 are unpatentable over Schuster.” slip op. at 50

  Patent outcomesUS 9,139,993 mixed
  § 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 9,139,993
• CQV Co., Ltd. v. Merck Patent GmbHNo claims unpatentable
  PTAB · Oct 14, 2025 · PGR2021-00054 · APJ Kristina M Kalan · PGR · Remand

  Claims 1–22 were not shown unpatentable because Sample C was not proven publicly available as prior art, and the original decision found the remaining grounds insufficient.

  RulingsRemand decision

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable

    “We agree with Patent Owner that Petitioner’s evidence in Kuntz (Ex. 1026), the Annual Report (Ex. 1028), Masuko (Ex. 1029), and Pfaff (Ex. 1034) is insufficient to show that Xirallic® Sample C was available to the public before the effective filing date of the ’861 patent. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26. Kuntz, the Annual Report, Masuko, and Pfaff may support a finding that the Xirallic® line of products was available to the public, but these documents do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public. We also agree with Patent Owner that the Technical Data Sheets (Exs. 1005–1010), Certificates of Analysis (Exs. 1011–1017), and Material Safety Data Sheet (Ex. 1025) are insufficient to show that Xirallic® Sample C was available to the public. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26–27. Regardless of how the Technical Data Sheets were used in the Opposition against the European counterpart of the ’861 patent (Exs. 1040, 1041) and during the prosecution of the application from which the ’861 patent issued (Ex. 1003, 102–104), the Technical Data Sheets do not refer to or describe the lot of Xirallic® from which Sample C was taken. Moreover, as noted by Patent Owner, the Technical Data Sheets (Exs. 1005–1010) indicate that they are “preliminary” and Petitioner has not provided any evidence that the Technical Data Sheets were ever issued to the public, as opposed to just issued internally. See PO Resp. 18–19. We also find persuasive Patent Owner’s argument that the Technical Data Sheets are preliminary because other, later-dated technical data sheets (Exs. 2012, 2013) lack the “preliminary” label and list characteristics that are different from those in Exhibits 1005–1010. See PO Resp. 19 (comparing, e.g., Ex. 1009 and Ex. 2013; Ex. 1005 and Ex. 2012). The Technical Data Sheets may support a finding that the Xirallic® products they describe existed as of the dates on the documents, but they do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public.” slip op. at 20

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedOther

    “witnesses. See Elbit Systems of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1358 (Fed. Cir. 2018) (citing Trs. of Columbia Univ. v. Illumina, Inc., 620 F. App’x 916, 922 (Fed. Cir. 2015); Inwood Labs., Inc. v. Ives Labs., Inc., 456 U.S. 844, 856 (1982)). We have reviewed the witness testimony in the record and, more particularly, Mr. Choi’s deposition answers regarding Petitioner’s purchase of the lot of Xirallic® from which Sample C came. We find that Mr. Choi’s responses cast doubt on the credibility of his declaration testimony, namely with regard to the public availability of Sample C. Mr. Choi represented that he was involved in the purchase of the lot of Xirallic® from which Sample C was taken. Ex. 2011, 48:1–23. Mr. Choi stated that he instructed Petitioner’s marketing team manager to buy the sample from a distributor of Patent Owner’s products located in Europe. Id. at 48:24–49:4. Mr. Choi stated that he has evidence of the transaction, but refused to reveal the name of the company from which Petitioner purportedly purchased the lot of Xirallic® (id. at 49:5–50:3) and refused to produce an email in his possession that would corroborate his testimony regarding Petitioner’s acquisition of the product (id. at 50:8–16, 51:10–23). Mr. Choi represented that he does not remember how much Petitioner paid for Sample B. Id. at 56:4–5. Mr. Choi admitted that the entity from which Petitioner acquired the lot of Xirallic® from which Sample C was taken is “not currently a Merck distributor” (Ex. 2011, 50:4–7) and was not “a Merck distributor at the time” that “samples B and C were purchased” (id. at 51:25–52:2). According to Mr. Choi, the company is a “former distributor” of Patent Owner’s products. Id. at 52:3–6. Mr. Choi did not know, according to his testimony, when that unnamed entity first obtained the lot of Xirallic® (id. at 52:7–10) and he stated that he did not have personal knowledge of how the entity obtained the lot of Xirallic® (id. at 52:12–19). Instead, Mr. Choi assumed the entity was “able to obtain the sample through the routine course or process” the entity uses “to take samples or get samples.” Id. at 52:12–19. Mr. Choi believed the sample of Xirallic® from which Sample C was taken was sealed when Petitioner received it because samples from dealers are sealed, and he remembered observing that the package was from a dealer. Id. at 52:24– 54:25. However, Mr. Choi admitted that he did not obtain a technical data sheet or certificate of analysis for the lot of Xirallic® from which Samples B and C were taken. Id. at 59:6–11. Mr. Choi also answered questions regarding Petitioner’s purchase of Samples D and H. Ex. 2011, 62:20–66:8, 67:7–9, 73:12–13, 73:17–22. Similar to his testimony regarding Samples B and C, Mr. Choi admitted withholding an email regarding the purchase of the lot of Xirallic® from which Sample D was taken. Id. at 62:20–63:9. Mr. Choi also admitted that he did not know how Akzo USA or Axalta obtained the Xirallic® the companies sold to him, and admitted that Akzo USA was not a distributor of Patent Owner’s products at the time Petitioner purchased the product. Id. at 63:10–66:8, 73:17–22. Mr. Choi also admitted that Petitioner did not pay Akzo USA for the lot of Xirallic® from which Sample D was taken, and did not pay Axalta for the lot of Xirallic® from which Sample H was taken. Id. at 67:7–9, 73:12–13. Although Petitioner presents declaration testimony from Mr. Choi representing that he purchased the lot of Xirallic® from which Samples B and C were taken in October 2011 (Ex. 1004 ¶ 16), Mr. Choi’s declaration testimony lacks corroborating evidence, and his deposition testimony does not support that the product was available to the public, as we found in our Final Written Decision. See Final Dec. 27–28. Notably, Petitioner produced corroborating evidence for Mr. Choi’s acquisition of Samples A, H, and I. See Ex. 1004 ¶¶ 13 (citing Ex. 1047), 18 (citing Exs. 1024, 1025). However, Mr. Choi withheld similar evidence for the Xirallic® lots from which Samples B, C, and D were taken. See Ex. 2011, 50:8–16, 51:10–23, 62:20– 63:9; Final Dec. 28. As Patent Owner argues, there is “no information to determine when a contract was established, that there was consideration for the exchange, that the product was available to be delivered when the alleged transaction took place, or even when the product was delivered. Choi has no memory of what was paid for the product.” Sur-Reply 24–25; see also PO Resp. 13–14; PO Br. Rem. 2–4.” slip op. at 34

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Based on the evidence discussed above, we are not persuaded that Petitioner has shown by a preponderance of the evidence that Sample C was available to the public. Regardless of whether a company avoids wasting shelf life of its products (Ex. 1004 ¶¶ 15–16), there is no persuasive evidence in the record showing that the lot of Xirallic® from which Sample C was taken was released from quality control and then made available to the public by Patent Owner. Mr. Choi’s testimony shows that Petitioner obtained the lot of Xirallic® from which Sample C was taken in an atypical manner (i.e., not from Patent Owner or one of Patent Owner’s current distributors) (Ex. 2011, 49:5–50:7, 50:8–16, 51:10–23, 51:25–52:6, 52:12– 19), and there is no evidence in the record to show that the lot of Xirallic® was intended for sale, rather than for experimental use only or for some other restricted use. Accordingly, we determine Petitioner has not demonstrated by a preponderance of the evidence that Sample C qualifies as prior art against the ’861 patent, and we determine that Petitioner has not shown by a preponderance of the evidence that the ’861 patent is unpatentable over the grounds relying on Sample C.” slip op. at 38

  Patent outcomesUS 10,647,861 not shown unpatentable
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 10,647,861
• Provisur Technologies, Inc. v. Weber Food Technology GmbHAll claims unpatentable
  PTAB · May 28, 2025 · IPR2024-00235 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–6, 8, 10, and 14–16 are unpatentable as anticipated by Young and obvious over Young and Norrie; the Johnson and Belk ground was not reached.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Provisur proposes that one of ordinary skill in the art would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. See generally PO Resp. There being no dispute, we adopt Provisur’s definition of the level of skill in the art.” slip op. at 5

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Provisur construes the claim terms “according to their plain and ordinary meanings as understood by a [person of ordinary skill in the art] in view of the specification and prosecution history” and posits that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 13. Weber appears to agree, stating in the related district court action that “most of [its] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 3 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 4 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 5 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 6 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). 1028, 5. This being the case, we do not find the need to expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (confirming that the Board need not construe claim terms where their construction is not material to the dispute).” slip op. at 5

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “without first determining how much fat existed to begin with, i.e., prior to the side of meat being trimmed. But, as Provisur correctly notes, Weber ignores what one skilled in the art reasonably would have understood from reading Young’s disclosure as a whole. See Pet. 30–36 (citing Ex. 1003 ¶¶ 104–106, 109–112); Pet. Reply 2–12. When that is done, one skilled in the art would have understood that a necessary premise of Young’s determination of the thickness of fat to remain on the loin is knowing the thickness of the fat to begin with, which Young’s imaging system 190 and imaging processing routine 240 determine by first analyzing a series of “fat/lean separation lines” and “edge lines” in the side of meat being trimmed. Pet. 30–32 (citing Ex. 1004, 17:34–62, 18:33–56, 22:53–24:38, Figs. 2, 13); Pet. Reply 3–7 (citing portions of same evidence). More specifically, as described in Young (and articulated by Provisur), the side of meat is placed fat side down on a product support, i.e., platen 20. See Ex. 1004, 7:16–21, Figs. 1, 2. Using several cameras—top plan camera 196, end view camera 197, and fat line camera 198—Young’s imaging system 190 acquires multiple images of the side of meat from various angles and under various lighting conditions to “provide image data regarding each side of [meat].” See id. at 17:34–18:56. That image data is then used by Young’s image processing routine 240 to generate a series of demarcation lines on the side of meat, including: (1) fat/lean separation lines (representing the interface between the loin meat and the fat layer along top, side, and end views of the meat product; and (2) edge lines (representing lines along the outer surface of the meat product). See id. at 22:53–23:67, Figs. 10, 13 (Blocks 242, 246, 250, 254). In addition, “a plurality of points (preferably 20) are generated for each of the fat/lean separation and edge lines using known pattern matching routines.” Id. at 23:28–30, Fig. 13 (Blocks 244, 248, 252, 256); see also id. at 23:61–63 (essentially same). The fat/lean separation and edge lines (and points therein) generated by Young’s image processing routine 240 are then used to calculate certain dimensions and characteristics of the side of meat, such as height, length, and width. Id. at 24:10–22, Fig. 13 (Block 258). As Provisur’s expert credibly testifies, one skilled in the art would have understood that the dimension from the fat/lean separation line to the edge line along the outer surface represents the thickness of fat cover on the side of meat, i.e., before the fat is trimmed. See Ex. 1003 ¶ 106. Insofar as how that dimension is used, Young states that controller 172 uses “dynamic (real time) image data” of the fat/lean separation and edge lines “to dynamically modify the cutting profile of the loin knife assembly 100 so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Ex. 1004, 18:32–45; see also id. at 17:48–52 (describing “real time processor” for “image processing routines”). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the loin, after trimming, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat,” although “[o]ther fat thicknesses may be desired in the alternative.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphases added)). Because the desired thickness of fat cover is what remains on the loin” slip op. at 9

  • Strike new argumentNew argument consideredDecided for patent owner

    “argument that Weber considers vital to its dispute of Provisur’s showing for the claimed fat thickness determination. During oral hearing, Weber repeatedly argued that Provisur changed theories midstream, i.e., between the time of the petition and the hearing. See Hrg. Tr. 22:18–24:47; see also id. at 31:14–22, 33:8–18, 34:16–20, 49:17–50:15, 54:16–56:25 (repeating same argument). More specifically, according to Weber, Provisur originally relied only on image data from Young’s “top view” camera as processed in “block 246” of Young’s image processing routine 240 when showing how Young meets the claimed fat thickness determination, whereas now Provisur relies on image data from Young’s “end view” cameras as processed in “Block 254.” Compare PO Sur-Reply 3–6 (focusing on Young’s “top view camera” in “block 246”), with Hrg. Tr. 27:4–16 (“[Block] 246, which is what they relied on, is processing images from the top-view camera in Young’s system. It is generating lines from the top-view camera in Young’s system. What they are newly trying to rely on today, for the first time, is Block 254 that is discussed toward the bottom of column 23 in Young, and that analyzes different images from a different camera. It is the end camera. It generates different lines. It demonstrates an end fat/lean line and an end edge line. Prior to today’s hearing, neither Petitioner, nor its expert, had ever discussed Block 254. You will not find a single reference to 254 in their papers, nor have they discussed the end edge line. It is completely new today. It finds absolutely no support in the record.” (emphases added)). We disagree with Weber’s contention. As shown and described in the petition, Provisur relies on more than simply Young’s “top view” camera and “block 246.” See Pet. 29–31. Rather, in its petition, Provisur annotates Young’s Figure 2 to show that image data from all three cameras of “imaging system 190”—“top plan camera 196, end view camera 197, [and] fat line camera 198”—play a role in the determination of fat thickness.8 Id. at 30. Moreover, Provisur cites the entire process depicted in “Figure 13” and described in columns “22:53–24:38” of Young as critical to the determination. Id. at 31. Those cited portions of Young involve not only the analysis of fat/lean and edge lines from “top view” images (block 246), but also the analysis of fat/lean and edge lines from “end view” images (blocks 250 and 254). See Ex. 1004, 23:12–24:13. In other words, Provisur’s showing for the claimed fat thickness determination is based on Young’s collective analysis of all those images. Indeed, Provisur’s expert confirms as much when confronted by Weber on cross-examination— Q. How does [Young] use the other cameras to identify that fat/lean separation line? A. Again, this is a -- this is a three-dimensional product that’s not regular, and all the views basically are needed to be able to describe that complex three-dimensional shape, so that the knife will be able to cut at that -- at that line, offset by whatever desired thickness there is, on that three-dimensional shape. Ex. 2006, 25:15–27:19 (emphasis added). 8 Indeed, contrary to Weber’s assertion, Provisur highlights “fat lean separation camera 198,” not top view camera 196, as most critical to the determination of fat thickness. Pet. 31. In the end, we reject the notion that Provisur changed theories” slip op. at 12

  Patent outcomesUS 8,529,321 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 8,529,321
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Instituted
  PTAB · Apr 25, 2025 · IPR2024-01463 · APJ David Cotta · IPR · Institution

  The Board instituted inter partes review of claims 1–10 on all asserted grounds, finding a reasonable likelihood of success on at least one claim.

  RulingsInstitution decision

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner

    “predict how the district court in the related district court litigation will proceed because the court may determine whether or not to stay any individual case . . . based on a variety of circumstances and facts beyond our control and to which the Board is not privy.” Sand Revolution II LLC v. Cont’l Intermodal Grp., IPR2019-01393, Paper 24, 7 (PTAB June 16, 2020) (informative). We decline to speculate on how the court may rule on the pending motion to stay. Accordingly, this factor is neutral.” slip op. at 13

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Under 35 U.S.C. § 314(a), inter partes review may not be instituted unless the Petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Petitioner has established a reasonable likelihood of prevailing on its assertion that at least one of the challenged claims is unpatentable based on the grounds advanced here. We decline to deny the Petition on a discretionary basis as requested by Patent Owner. Thus, for reasons explained below, we institute inter partes review of claims 1–10 of the ’706 patent.” slip op. at 2

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted

    “TC(220), and ΔRz/Ra are result effective variables and that copper foils having ΔPD, TC(220), and ΔRz/Ra values that meet the values recited in claim 1 have advantageous properties. See, e.g., Ex. 1005 ¶ 45 (Kim ’761, disclosing that preferably the “difference in peak count roughness Rpc between the shiny surface . . . and the matte surface . . . of the electrolytic copper foil . . . is preferably 60 or less” because “when the difference in the peak count roughness Rpc exceeds 60 capacity maintenance of the secondary battery is deteriorated.”);15 Ex. 1007, 3:16–23, 4:14–23 (Cheng, disclosing that the foils of Cheng’s invention have (220) and (311) surfaces that provide increased elongation and that solve a high roughness problem that rendered traditional products unsuitable for use in a lithium ion secondary battery), 10:27–34 (Cheng, disclosing that in the foils of Cheng’s invention “the roughness difference between both sides was extremely small” and thus “it was . . . not easy for the electrolytic copper foil to break or fracture during the charging-discharging cycles and the life of a battery is thus increased”), Tables 3 & 4 (Cheng, disclosing embodiments and comparative examples with TC(220) values meeting the requirements of claim 1); Ex. 1008, 6:36–44 (Wolski, disclosing that “the surface roughness Rz at the matte side of the untreated copper foil of the present invention is the same or smaller than the surface roughness Rz at the shiny side . . . so that the surface treated copper foil . . . becomes more low-profiled . . . whereby it becomes a foil having a large etching factor”), 9:1–29 & Table 2 (Wolski, disclosing 15 Dr. Randall testifies that “Kim ’761’s peak count roughness Rpc corresponds to the peak density PD of the ’706 patent.” Ex. 1003 ¶ 52. At this stage in the proceeding, this testimony is unrebutted. 38 embodiments meeting the ΔRz/Ra of claim 1, describing them as having “matte side roughnesses” that are “sufficiently small,” and as having “excellent” “high temperature elongation characteristics”), 11:37–41 (Wolski, describing comparative examples as having “large” matte side roughnesses “whereby etching factors are not good”), 12:12–27 (Wolski, teaching that “as compared with a conventional untreated copper foil, both surfaces of the untreated copper foil obtained by [Wolski’s] invention are flat” resulting in a low profile foil that has “excellent elongations at room temperature and high temperature and also high tensile strength”). The teachings in the prior art support the presently unrebutted testimony of Dr. Randall explaining why the POSA would have been motivated to modify Kim ’761’s copper foil to have the claimed TC(220) and ΔRz/Ra. Ex. 1003 ¶¶ 66–68, 71–74; Pfizer Inc., v. Sanofi Pasteur Inc., 94 F.4th 1341, 1348 (Fed. Cir. 2024) (“Where [a gap in prior art] includes a parameter not necessarily disclosed in the prior art, it is not improper to consider whether or not it would have been recognized as result-effective. If so, then the optimization of that parameter is ‘normally obvious.’”). Accordingly, we are not persuaded by Patent Owner’s argument that Petitioner failed to articulate a sufficient motivation to combine the references. To the contrary, the preliminary record presents a strong showing that the POSA would have been motivated to combine the references in the manner described in the Petition.” slip op. at 38

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “At this stage of the proceeding, Patent Owner does not contest Petitioner’s definition of the level of skill in the art. Prelim. Resp. 4 (“For purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art”). Petitioner’s definition appears to be consistent with the field of the invention reflected in the prior art of record and the disclosure of the ’706 patent. Accordingly, for purposes of this Decision, we adopt Petitioner’s proposed definition of the person of ordinary skill in the art.” slip op. at 21

  Claim construction§ 103 obviousnessDiscretionary denialcites KSR · Graham
  Patents in suitUS 11,591,706

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.