- Aroma360, LLC v. Air Esscentials, Inc.Some claims unpatentablePTAB · Oct 6, 2026 · IPR2025-00707 · APJ Eric C Jeschke · IPR · Final written decision
Claim 5 is unpatentable over Gao-2 and over Gao-2 with Goubet; claims 1, 3, 4, and 6–8 were not shown unpatentable on any ground, and substitute claim 17 was denied.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Neither Petitioner nor Patent Owner propose explicit constructions for any claim terms. Pet. 16–17; PO Resp. 5–6. Based on the complete record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10
- Expert testimonyPetitioner expert creditedDecided for patent owner
“As an initial matter, the record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration for allegedly not reviewing the parties’ claim constructions. See Pet. Reply 2–3 (citing Ex. 1046, 115:15–18). Contrary to Petitioner’s argument, in the cited 11 This refers to the recitation in clauses 1F and 5F that the “diffusion assembly is disposed between said upper chamber and said lower chamber.” discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1; see also Pet. Reply 3 (arguing that “Dr. Micklow’s opinion that the prior art does not render the claims obvious is premised on an interpretation of certain claim limitations that are inconsistent with both parties’ constructions” (emphasis added)). Instead, we read Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also id. at 115:15–18 (“I don’t know if I would even apply claim construction. I applied engineering principles to a document that had been published with the patent office.”).” slip op. at 12
- BurdenNot shown unpatentable
“referring to the same direction as the separation of the “upper chamber” and “lower chamber” (vertically in both Figure 6 of the challenged patent and Figure 1 of Goubet), we turn back now to Petitioner’s discussion of clause 1F, which includes the limitation at issue. There, Petitioner does not discuss why the “diffusion assembly” is allegedly “disposed between” the “upper chamber” and “lower chamber,” but instead, Petitioner discusses why a component of the “diffusion assembly”—the “atomizer assembly”—is allegedly “disposed between” the “upper chamber” and “lower chamber”: Pet. 39. In the end, we need not assess whether the “atomizer assembly” identified by Petitioner is “disposed between” the “upper chamber” and “lower chamber” under the proper construction of that term (which, again, we need not and do not determine here) because the “disposed between” limitation does not involve the “atomizer assembly.” Instead, we find that, by failing to address why the identified “diffusion assembly” is “disposed between” the identified “upper chamber” and “lower chamber,” Petitioner has failed to provide persuasive evidence that Goubet discloses or suggests the “disposed between” limitation. Pet. 38–39 (discussing the claim language “said diffusion assembly is disposed between said upper chamber and said lower chamber” but only discussing the location of the “atomizer assembly”); see 35 U.S.C. § 316(e) (“In an inter partes review . . . , the petitioner shall have the burden of proving a proposition of unpatentability by a preponderance of the evidence.”). For the reasons above, we find, based on the complete record, that Petitioner has not shown by a preponderance of the evidence that Goubet discloses or suggests the “disposed between” limitation.” slip op. at 22
Patent outcomesUS 10,092,918 mixedClaim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,092,918 - Imperative Care, Inc. v. Inari Medical, Inc.All claims unpatentablePTAB · Oct 6, 2026 · IPR2025-00728 · APJ Timothy G Majors · IPR · Final written decision
Claims 1–7, 9, 10, 15–18, and 20–24 are unpatentable as obvious over Schaffer with Hartley or Eller; claims 1–3, 5, 6, 9, 15–18, and 21–24 are also obvious over Hartley and Eller.
RulingsFinal written decision- Skill levelSkill level board ownDecided for patent owner
“Petitioner’s proposed POSA definition lacks specificity. That definition, if interpreted generically, could mean that a person may qualify as a POSA if they had, for example, a B.S. in mechanical engineering and only two years of experience designing any type of product in any field. That is too broad. We find that a POSA would have had the agreed-upon educational credentials—an undergraduate degree in mechanical engineering or a related engineering discipline. Ex. 1003 ¶ 35; Ex. 2033 ¶ 61. We find that a POSA would also have had 2–4 years of design or engineering experience related to products in the field of the invention, which involves endovascular devices and the surgical procedures that use such devices. Ex. 1001, 1:16–54 (background of the invention). Such devices include, but are not limited to, hemostasis valves and catheters for testimony of the parties’ experts, the POSA need not have had first-hand experience designing hemostasis valves. See, e.g., Ex. 1037 (Zalesky Tr.), 72:11–73:7 (testifying direct experience “designing” hemostasis valves or aspiration catheters is not necessary, but “general experience with vascular devices and procedures” is required). Further, as Dr. Zalesky testified, the POSA’s experience related to developing such devices “could be as simple as bench testing and looking at clinical data.” Id. at 74:5–75:1. Lastly, a POSA would have understood such devices’ design requirements as determined by the needs of the physician, patient, and procedure, which understanding may be informed by work experience or study. Ex. 2030, 24:5–21.” slip op. at 12
- Expert testimonyPetitioner expert creditedPatent owner expert creditedMixed
“above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 28
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionDecided for patent owner
“Patent Owner cites intrinsic evidence in support of its interpretation, which include claim 1’s recitation of an “active tensioning mechanism” comprising the filament and the Specification’s description of a filament that can be both “loosened” and “tightened.” PO Resp. 14–17 (citing, e.g., Ex. 1001, 9:36–37, 9:53–56 (teaching “the filament 150 is tightened” when the actuator buttons are released and “the filament 150 is loosened” when the buttons are pressed to open the valve)); see also Ex. 2025, 1288 (defining “tension” as to “tighten to a desired or appropriate degree”). These descriptions from the patent are more consistent with the view that the filament is characteristically flexible, not rigid. 10 We reached the same conclusion, based on substantially the same records, in the Institution Decision and the Final Written Decisions in the 1157, 156, and 289 IPRs. Inst. Dec. 14–18; Ex. 1042, 14–24; Ex. 1048, 16–23; Ex. 1049, 14–17 (noting the parties’ agreement at oral hearing that there was no additional argument or evidence about whether a filament requires flexibility that was not already addressed in related matters). After we construed the “filament” term to require flexibility at institution, Petitioner provided no further argument or evidence on this issue in its authorized trial briefing or at oral hearing. See generally Pet. Reply. embodiments (where the filament forms one or more loops like depicted and described in Figures 6–7) require a flexible structure. See, e.g., Ex. 2032, 15–16 (explaining that the device would not work to constrict the tubular sidewall and lumen (analogous to the elongate member defining a lumen of the claims here) if the filament forming the loop(s) was inflexible); Ex. 1001, Figs. 6–7 (filament 150, with sub-filaments 150-A and 150-B). Although flexibility of the filament in the patent’s “bight” embodiments (e.g., as shown in Figures 8 and 9) is less clear, there is a dearth of evidence from Petitioner—either intrinsic or extrinsic to the patent—showing why a POSA would have understood the bights as embracing rigid structures. See Ex. 1001, Figs. 8–9. Moreover, as admitted by Petitioner’s expert, that a filament may be made from various materials described in the patent (e.g., synthetics or metals) does not, absent more information, lead to a conclusion that a filament is “rigid.” Ex. 2030, 125:2–126:4 (testifying “the relative stiffness or rigidity is not clear from those . . . materials without knowing much more information”).” slip op. at 16
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“We find that Petitioner has not shown, by a preponderance of the evidence, that Schaffer anticipates claim 1 or any of the other challenged claims, each of which requires at least one “filament.” We are unpersuaded above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 27
Patent outcomesUS 11,844,921 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,844,921 - Aroma360, LLC v. Air Esscentials, Inc.All claims unpatentablePTAB · Oct 6, 2026 · IPR2025-00706 · APJ Eric C Jeschke · IPR · Final written decision
Claims 1, 4, and 7–10 are unpatentable as obvious over Goubet and anticipated by Gao; proposed substitute claims 20 and 21 are denied as indefinite and lacking written-description support.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In the Response, Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner, but Patent Owner “reserves the right to address [the definition] should new issues materialize.” PO Resp. 6. Patent Owner did not address this issue in the Sur-reply. As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionOther
“Network LLC, 929 F.3d 1350, 1357 (Fed. Cir. 2019). At first glance, the language of the limitation at issue—which, again, recites “the compressed air and the operative fluid mix together in said mixing chamber to form the fluid dispersion”—would seem to require the “fluid dispersion” (under the stipulated construction) to be fully formed in the “mixing chamber.” In other words, the language of the limitation alone would seem to support Patent Owner’s proposed construction for the “form the fluid dispersion” limitation. But the claim construction analysis does not end with consideration of the claim language alone. Next, we turn to the Specification. The Federal Circuit has said that the specification “is the single best guide to the meaning of a disputed term.” Phillips, 415 F.3d at 1315 (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). Here, the discussion in the Specification of precisely the same language as in the limitation at issue strongly supports that “to form a fluid dispersion” in the limitation at issue requires only initial mixing of the compressed air and operative fluid in the mixing chamber, with further “formation” of the ”fluid dispersion” occurring downstream of the mixing chamber: More importantly, the “predetermined amount” of compressed air and the “preselected amount” of the operable fluid are initially mixed together in the mixing chamber 226 to form a fluid dispersion. The diffusion chamber 112" is further structured to facilitate the formation of a plurality of substantially uniform droplets, as defined hereinabove, in the fluid dispersion prior to discharge from the diffusion chamber 112" through discharge port 132. Ex. 1001, 10:62–11:2 (emphasis added) (discussing Figure 6), quoted, in part, at Pet. Reply 6–710; see also Ex. 1001, 5:64–6:4 (same language, except without double primes, in a discussion of Figures 1 and 2). To be sure, certain passages in the Specification could be read to indicate that a “fluid dispersion” must be fully formed in the “mixing chamber.” See, e.g., Ex. 1001, 6:11–12 (“More in particular, the suppression chamber 232 receives the fluid dispersion from the mixing chamber 226.”); see also id. at 7:22–33, 11:39–52 (both implying that a “fluid dispersion” is formed in the mixing chamber). But the passage block quoted directly above (and the similar one bridging columns 5 and 6) more directly addresses the issue at hand—i.e., the scope of “form the fluid dispersion”—by using the same” slip op. at 13
- Expert testimonyPatent owner expert discountedMixed
“As an initial matter, the record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration for allegedly not reviewing the parties’ claim constructions. See Pet. Reply 2 (citing Ex. 1046, 115:15–18). Contrary to Petitioner’s argument, in the cited discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1. Instead, we read Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also id. at 115:15–18 (“I don’t know if I would even apply claim construction. I applied engineering principles to a document that had been published with the patent office.”).” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“To satisfy its burden of proving obviousness, a petitioner cannot employ mere conclusory statements. The petitioner must instead articulate specific reasoning, based on evidence of record, to support the legal conclusion of obviousness.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016); TriVascular, Inc. v. Samuels, 812 F.3d 1056, 1066 (Fed. Cir. 2016) (“Although the KSR test is flexible, the Board ‘must still be careful not to allow hindsight reconstruction of references . . . without any explanation as to how or why the references would be combined to produce the claimed invention.’”) (citation omitted). Based on the complete record, we agree with Patent Owner that “Petitioner’s asserted motivation boils down to the conclusory statement that given Goubet and Kaiser, ‘it was well known in the field at the time of the invention that droplets of greater uniformity result in uniform droplet evaporation.’” PO Resp. 31 (quoting Pet. 59). We agree with Patent Owner that Petitioner’s discussion of the alleged reasons to combine (Pet. 59) is insufficient to support the proposed combination here. See Magnum Oil, 829 F.3d at 1380. Specifically, we are not persuaded that Kaiser’s teachings—which relate to combustion (Ex. 1014 at 43)—would have led one of ordinary skill in the art to the proposed modifications, which would allegedly “improve the smoothness (i.e., less harsh) of the aroma generated as the oil droplets evaporate in the surrounding airspace.” See Pet. 59 (emphasis added); White Pet. Decl. ¶ 251 (same); see PO Resp. 32 (“Rather, Dr. White merely describes the ability to achieve the effect as in the claimed patent, not why a [person of ordinary skill in the art] would look to the field of electrospray injection and combustion in mesoscale power-generation systems, using high-voltage electric fields to generate charged fuel droplets for controlled combustion in catalytic micro-combustors when considering atomization for scents.”). For these reasons, we determine, in light of the complete record, that Petitioner has not shown by a preponderance of the evidence that one of ordinary skill in the art at the time of the invention would have had reason to combine Goubet and Kaiser, as proposed. slip op. at 32
Patent outcomesUS 10,583,449 unpatentableClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · NautilusPatents in suitUS 10,583,449 - Aroma360, LLC v. Air Esscentials, Inc.All claims unpatentablePTAB · Oct 6, 2026 · IPR2025-00705 · APJ Eric C Jeschke · IPR · Final written decision
Claims 7–9 and 11 are unpatentable as obvious over Goubet; proposed substitute claim 21 is denied as indefinite.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In the Response, Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner, but Patent Owner “reserves the right to address [the definition] should new issues materialize.” PO Resp. 5. Patent Owner did not address this issue in the Sur-reply. As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9
- Expert testimonyPetitioner expert creditedDecided for patent owner
“The record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration, as asserted in Petitioner’s overall argument. See Pet. Reply 1–2. Contrary to Petitioner’s argument, in the cited general discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1; see also Pet. Reply 2 (arguing that “Dr. Micklow’s declaration is premised on understandings of claim scope that are inconsistent with the constructions advanced by both of the parties” (emphasis added)). Instead, we read the cited portions of Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also Pet. Reply 1 (citing Ex. 1046, 112:4–12, 113:13–20, 115:15–18). Next, we turn to each of the four specific claim terms that Petitioner highlights in its further arguments.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed
“B. Claim Construction In inter partes reviews, the Board interprets claim language using the same claim construction standard that would be used in a civil action under 35 U.S.C. § 282(b), as described in Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). See 37 C.F.R. § 42.100(b). Under that standard, we generally give claim terms their ordinary and customary meaning, as would be understood by a person of ordinary skill in the art at the time of the invention, in light of the language of the claims, the specification, and the prosecution history. See Phillips, 415 F.3d at 1313–14. Although extrinsic evidence, when available, may also be useful when construing claim terms under this standard, extrinsic evidence should be considered in the context of the intrinsic evidence. See id. at 1317–19. Neither Petitioner nor Patent Owner propose explicit constructions for any claim terms. Pet. 10–11; PO Resp. 5. Based on the complete record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“Florida Litigation a Joint Claim Construction statement that included stipulated claim constructions and disputed claim constructions for terms in the challenged patent as well as the ’449 patent and the ’918 patent. See Ex. 1018, Exhibit A (Stipulated Claim Constructions), Exhibit B (Disputed Claim Constructions). The parties stipulated to the construction of the terms “fluid dispersion” and “baffle” as recited in the challenged claim. See id., Exhibit A.10 10 When staying the Florida Litigation, the District Court cancelled the scheduled claim construction hearing. See ECF No. 67 (April 8, 2025) (granting joint motion to stay); ECF No. 68 (April 8, 2025) (cancelling the The stipulated construction of “fluid dispersion” merely restates the express definition of “fluid dispersion” from the challenged patent (although the definition is not cited or discussed in the parties’ filing). Compare Ex. 1018, Exhibit A, with Ex. 1001, 3:8–20. Similarly, the stipulated construction of “baffle” essentially parrots one sentence in the challenged patent (again, not cited or discussed in the parties’ filing). Compare Ex. 1018, Exhibit A, with Ex. 1001, 7:57–59. To the extent necessary, we determine that the complete record supports the parties’ stipulated constructions of “fluid dispersion” and “baffle,” and we apply those constructions below.” slip op. at 10
Patent outcomesUS 9,527,094 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites Phillips · NautilusPatents in suitUS 9,527,094 - Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentablePTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other
“Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner
“We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29
Patent outcomesUS 11,886,774 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - Microsoft Corporation v. Sterling Computers CorporationAll claims unpatentablePTAB · Sep 14, 2026 · IPR2025-00270 · APJ Bach V Hoang · IPR · Final written decision
Claims 1–13, 15, 18, 20, 21, and 27 are unpatentable as obvious over Rohall and Schiavone, with Gomes added for claims 9 and 27.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Our Institution Decision adopted Petitioner’s definition of a person of ordinary skill in the art. Inst. Dec. 9–10. In its Response, Patent Owner adopts Petitioner’s proposed level of ordinary skill. See PO Resp. 16 (“Patent Owner and its expert adopt the Board’s definition for purposes of this Response.”). Having considered the record, we continue to adopt Petitioner’s proposed level of skill, as articulated above. We are satisfied that Petitioner’s proposal comports with the level of skill necessary to understand and implement the teachings of the ’911 Patent. Accord Inst. Dec. 9–10.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“We agree with Petitioner and determine that the construction of “relational references” does not require the use of a relational model and, further, includes pointers that point to related messages exchanged among users. The intrinsic evidence leads us to this construction. First, the relevant language of claim 1 recites “a message container containing relational references pointing to a plurality of sent submessages stored externally to the message container in the message database.” Ex. 1001, 15:56–59. A relational model is not recited in that language or anywhere else in the claim. See id. at 15:51–16:14. Therefore, the claim does not expressly require a relational model. Furthermore, the claim language supports Petitioner’s interpretation that “relational references” include pointers that point to related messages because the claim states that the “relational references” perform the task of “pointing to a plurality of sent submessages.” Pet. Reply 7. Accordingly, the language of the claim supports a construction that does not require a relational model and at least suggests relational references include pointers.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“No other claim terms need construction for our decision here and we decline unnecessarily doing so. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 15
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentableDecided for petitioner
“We agree with Petitioner that the ordinarily skilled artisan would have been motivated to combine Rohall and Schiavone because Schiavone provides reasons to apply its techniques to email systems such as Rohall’s. Schiavone describes a need for “ensuring compliance of e-mail messages with applicable standards and/or laws and/or otherwise determining appropriateness of a message for an intended recipient,” especially because there is “a patchwork of local, federal and international laws.” Ex. 1006 ¶ 6. Schiavone also states that filtering emails, e.g., to remove spam, is beneficial. Id. ¶¶ 1–2. As Schiavone describes problems in email systems, which its rules-based email processing technique addresses, we determine that the ordinarily skilled artisan would have been motivated to combine Rohall and Schiavone. See KSR, 550 U.S. at 401 (a reference which teaches, suggests, or motivates its combination may “identify a reason that would have prompted a person of ordinary skill in the art to combine the elements”).” slip op. at 19
Patent outcomesUS 8,073,911 unpatentableClaim construction§ 103 obviousnesscites KSRPatents in suitUS 8,073,911 - Intel Corporation v. Advanced Cluster Systems, Inc.All claims unpatentablePTAB · Sep 1, 2026 · IPR2025-00914 · APJ Brian P Murphy · IPR · Final written decision
Claims 1–19 are unpatentable as obvious over Menon, Trefethen, RS6000, and POEref.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citing Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986)). “These factors are not exhaustive but are merely a guide to determining the level of ordinary skill in the art.” Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). There is uncontested evidence in the record before us that reflects the knowledge and We adopt the Petition’s formulation of the level of ordinary skill in the art, which is consistent with the ’679 patent, the prior art of record, and the testimony of both experts.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“The Petition relies on the ordinary and customary meaning of the claim terms consistent with the Phillips standard. Pet. 12–13 (citing 37 C.F.R. § 42.100(b)). The Petition also addresses the construction of “peer-to-peer architecture” recited in independent claim 1 of the ’679 patent, a limitation we need not construe to resolve the parties’ dispute in this proceeding. Id. at 13; see, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Owner relies on the ordinary and customary meaning of the claim terms consistent with the Phillips standard without further analysis. Resp. 7.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“RS6000 with Menon, namely because RS6000 provides an overview of the IBM SP2 multiprocessor and Menon teaches the use of “IBM SP2, a modern high performance distributed memory multiprocessor” used in the MultiMATLAB system. Id. at 24–25 (citing Ex. 1003 ¶¶ 142–145; Ex. 1005, 5–6, 14; Ex. 1007, 1, 11). The Petition also explains why POEref pertains to the field of cluster computing in a parallel operating environment. Id. at 26 (citing Ex.1008, 11 (“PE Software is designed to run on an … RS/6000 network cluster”)); (further citing Ex. 1001, 1:14–15; Ex. 1003 ¶¶ 146–149). The Petition contends that a POSITA would have been motivated to combine the teachings of POEref with Menon “because Menon suggests the combination by teaching that MultiMATLAB uses ‘POE, IBM's Parallel Operating Environment.’” Id. at 26–27 (citing Ex. 1005, 6); (further citing Ex. 1003 ¶¶ 150–153; Ex. 1005, 14; Ex. 1008, 11, 46). We agree with Petitioner’s analysis. We find the Petition’s argument and evidence of a motivation to combine the asserted prior art references in the manner claimed to be compelling, persuasive, consistent with the disclosures in the references, which include internal cross-references to each other, and supported by the expert testimony of Dr. Bajaj.” slip op. at 19
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“skill, upon reading the reference, would be discouraged from following the path set out in the reference, or would be led in a direction divergent from the path that was taken by the applicant.” In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994). Patent Owner argues that Menon teaches away from a combination with Trefethen because “Menon expressly states that Trefethen’s first-generation architecture is inadequate for the objectives that motivated the newer design.” Resp. 35–37. The evidence does not support Patent Owner’s position. First, Patent Owner’s teaching away argument is inconsistent with the strong evidence of a motivation to combine Menon and Trefethen discussed above. Second, Patent Owner’s teaching away argument is contrary to the evidence of record for the reasons given in Petitioner’s Reply. Reply 13–15 (e.g., “Menon explicitly cites Trefethen and explains that Menon builds on the teachings of Trefethen.”) (citing Pet. 22; Ex. 1003 ¶ 70; Ex. 1005, 1–3; Ex. 1163 ¶¶ 47–53). We are further persuaded by Dr. Bajaj’s reply testimony: the “MultiMATLAB teachings in Trefethen. In fact, Menon describes enhancing the system of Trefethen. For example, Menon describes a list of “goals” already achieved by MultiMATLAB and then states that the architecture has been “redesigned to achieve two further goals.” One of these two “further goals” is “extensibility,” which Menon achieves by its description of adding “MEX routines” to the system of Trefethen. Far from showing an “incompatibility” between Menon and Trefethen as the POR argues, Menon’s addition of the “MEX routines” to MultiMATLAB shows that such a modification was within the capabilities of a POSITA, because the authors of the Menon paper actually implemented the modification. Ex. 1163 ¶ 49 (citing Ex. 1005, 1–3). Dr. Bajaj’s testimony is unrebutted, credible, and supported by the record. We agree with Dr. Bajaj’s reasoning, which is based on direct quotes in Menon. We further agree with Dr. Bajaj’s conclusion that Menon does not teach away from the combination with Trefethen. Id. ¶¶ 50–52. Menon’s description of building on and enhancing the teachings of Trefethen—the earlier work of the same research group at Cornell—by adding MEX routines to achieve high-performance parallel computing and extensibility for MATLAB, demonstrates a classic motivation for a POSITA to combine the teachings of Menon and Trefethen. RS6000 and POEref are specifically referenced in Menon-Trefethen and add operational details of the parallel operating platform that teach a POSITA how to implement the MultiMATLAB system with a reasonable expectation of success. Such facts are inconsistent with Patent Owner’s teaching away and lack of motivation arguments.” slip op. at 24
Patent outcomesUS 12,021,679 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 12,021,679 - Intel Corporation v. Advanced Cluster Systems, Inc.All claims unpatentablePTAB · Aug 26, 2026 · IPR2025-00913 · APJ Brian P Murphy · IPR · Final written decision
Claims 1–30 are unpatentable: claims 1–25, 27–28, and 30 as obvious over Menon, Trefethen, RS6000, and POEref; claims 26 and 29 over those references plus MPIref.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citing Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986)). “These factors are not exhaustive but are merely a guide to determining the level of ordinary skill in the art.” Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). There is uncontested evidence in the record before us that reflects the knowledge and experience of a POSITA. We adopt the Petition’s formulation of the level of ordinary skill in the art, which is consistent with the ’034 patent, the prior art of record, and the testimony of both experts.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionOther
“processor,” “multi-core” processor, or “singular ‘hardware processor’ that ‘comprises’ (or ‘with’) multiple ‘processing cores’” as Patent Owner contends. Resp. 11–12, 21; see also Ex. 1163 ¶ 22 (“The claim does not recite ‘single chip,’ ‘single package,’ ‘single die,’ or ‘single multi-core microprocessor.’”). Nor do the claims recite a plurality of processing cores “within” a single-chip package or read as “multi-core within a processor” as argued by Patent Owner. Resp. 12–14; Sur-Reply 2; see Reply 6 (citing Ex. 1163 ¶ 23 (“Thus, the phrase ‘with a plurality of processing cores’ identifies the required processing resources associated with the hardware processor; it does not import a packaging limitation.”)). The claims do recite a hardware processor “with” a plurality of processing cores; a critical distinction even Patent Owner reads as open-ended, i.e., as a hardware processor that “comprises” a plurality of processing cores. See Resp. 11 (“the claims require a singular ‘hardware processor’ that ‘comprises’ (or ‘with’) multiple ‘processing cores’”). Consequently, the claim language does not support Patent Owner’s proposed construction of “a . . . hardware processor with a plurality of processing cores” as a single multi-core processor. cores it contains” in reliance on a parsed description in the ’034 patent specification: The specification explains: “Each processor can contain one or more processor cores that are capable of single-threaded execution. Processor cores are generally independent microprocessors, but more than one can be included in a single-chip package.” Id. at 1212 (partially quoting Ex. 1001, 5:11–16); Sur-Reply 2. The quoted description does not support Patent Owner’s contention that the claimed “a . . . hardware processor with a plurality of processing cores” must be limited to a “single multi-core processor” that “locates multiple cores within a ‘single-chip package,’” i.e. limited to a single multi-core microprocessor such as “a Core 2 Duo is one processor package with two cores.” Resp. 12– 13, 21 (citing Ex. 1001, 7:15–25). The description quoted above from column 5, moreover, describes a “processor” that “can contain one or more processor cores” each of which can be an independent microprocessor. Reply 2–3 (citing Ex. 1001, 5:11–16; Ex. 1163 ¶¶ 10–14). As Petitioner emphasizes, the specification distinguishes a “processor” from a “microprocessor” and describes a “processor” that “can be one or more general purpose single-core or multi-core microprocessors,” rather than limiting a “processor” to a single multi-core microprocessor. Reply 3–5 (citing Ex. 1001, 7:14–36, Fig. 1; Ex. 1163 ¶¶ 15–18).” slip op. at 13
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“art because they pertain to the same “field of cluster computing” as the ’034 patent and “are reasonably pertinent to the problem of the ’034 patent, namely, executing a single program on multiple nodes.” Pet. 22 (citing Ex. 1001, 1:14–15; Ex. 1003, ¶¶ 65–69; Ex. 1005, 2; Ex. 1006, Abstract). The Petition emphasizes that Menon expressly cites and builds on the MultiMATLAB system taught by Trefethen. Id. (citing Ex. 1003 ¶ 71; Ex. 1005, 1–2). The Petition contends that: combination of prior art elements according to known methods (executing MATLAB code on a multiprocessor system) to yield the predictable result discussed in both papers: the MultiMATLAB system executing MATLAB in parallel to perform mathematical calculations. Id. at 22–23 (citing Ex. 1003 ¶ 70; Ex. 1005, Abstract; Ex. 1006, 2–7). The Petition further contends that a POSITA would have found it predictable to combine Trefethen with Menon with a reasonable expectation of success “because researchers had a strong desire to parallelize MATLAB.” Id. at 23–24 (citing Ex. 1003 ¶ 73; Ex. 1005, 2; Ex. 1006, 11–12.)” slip op. at 27
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“A POSITA would have had an especially strong reason to read these references together because they address the same project, the same MATLAB-based parallel-computing problem, and the same MultiMATLAB command environment. Menon expressly identifies Trefethen’s MultiMATLAB work and then describes a redesigned architecture that preserves the same user-level objective––parallel MATLAB computations—while improving implementation details and extensibility. A POSITA therefore would not view the references as mutually exclusive alternatives. Rather, a POSITA would understand Trefethen as teaching specific MultiMATLAB commands and examples, including Eval, Send, Recv, and the architecture was implemented and improved in a later version. Ex. 1163 ¶¶ 71–72 (emphases added). We find the above reasoning persuasive and adopt it as our own. Petitioner and Dr. Bajaj demonstrate a sound technical motivation for a POSITA—someone having a bachelor’s degree in computer science, computer engineering, or electrical engineering and two years of experience working in the field of cluster computing or parallel processing—to combine Menon and Trefethen: to improve MATLAB’s operational performance and extensibility in a parallel operating environment. Menon builds on Trefethen to improve and extend the parallel processing capabilities of MultiMATLAB: “This system will enable users to access high-performance parallel routines from within the MATLAB environment, to extend the environment with new parallel routines, and to use these routines to develop parallel applications with the MATLAB language.” Ex. 1005 Abstract. Menon is intended to be read in conjunction with Trefethen, as would be expected from two references generated by the same research group at the same university addressed to the same technical subject matter about a year apart. Ex. 1005, 1; Ex. 1006, Ex. 1086 ¶¶ 65, 101, 102. The very first citation in Menon is to Trefethen. Ex. 1005, 2, 16.” slip op. at 30
Patent outcomesUS 11,570,034 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,570,034 - Meta Platforms, Inc. v. Sterling Computers CorporationAll claims unpatentablePTAB · Aug 3, 2026 · IPR2025-00430 · APJ Bach V Hoang · IPR · Final written decision
Claims 1–3, 5–9, 13–15, 18, 19, and 22 are unpatentable as obvious over Dumais, Rose, and Rose with Bieganski.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Our Institution Decision adopted Petitioner’s definition of a person of ordinary skill in the art. Inst. Dec. 7–8. In its Response, Patent Owner adopts Petitioner’s proposed level of ordinary skill. See PO Resp. 13–14 (“Patent Owner and its expert adopt the Board’s definition for purposes of this Response”). Having considered the record, we continue to adopt Petitioner’s proposed level of skill, as articulated above. We are satisfied that Petitioner’s proposal comports with the level of skill necessary to understand and implement the teachings of the ’217 Patent. Accord Inst. Dec. 7–8.” slip op. at 8
- ExcludeMotion to exclude, deniedOther
“We have not considered any of the evidence Patent Owner moves to exclude in reaching our findings and conclusions set for in this Decision. As a result, Patent Owner’s Motion to Exclude this evidence is dismissed as moot.” slip op. at 55
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference is prior artPriority date, deniedDecided for petitioner
“We determine that Patent Owner has not carried its temporary burden of production to support its contention that the inventors were reasonably diligent throughout the critical period. See Parus Holdings, 70 F.4th at specifically cite the relevant record evidence combined with an explanation of the significance of the produced material in briefs. See id. at 1372 (explaining that “[t]he burden of production cannot be met without some combination of citing the relevant record evidence with specificity and explaining the significance of the produced material in briefs”). Patent Owner states that it “submitted extensive evidence.” PO Sur-reply 14. But simply submitting dozens of exhibits is not enough. As our reviewing court has admonished, the “burden of production cannot be met simply by throwing mountains of evidence at the Board without explanation or identification of the relevant portions of that evidence.” See Parus Holdings, 70 F.4th at 1371. Instead of citing what specific portions of those exhibits are relevant and why, Patent Owner cites entire exhibits and asserts, without analysis or explanation, that they show diligence. See PO Resp. 49– 50 (citing numerous exhibits without pinpoint citations). Patent Owner’s Sur-reply asserts that Patent Owner’s Response was adequate (PO Sur-reply 17), but an examination of the Response shows that it was not. For example, in its Response, Patent Owner states “numerous documents corroborating [the inventors’] testimony that, during the critical period, they were refining the formulas to implement the BlueSpace relevance model” by citing the entirety of so-called “corroborating documentation” spanning Exhibits 2032 through 2074 as well as the entirety of Justin Marston’s Second Supplemental Declaration (Ex. 2030) and Paul Marston’s Declaration (Ex. 2031). See PO Resp. 49. However, there is not a single pinpoint citation to any particular paragraph, page, or entry for any of those exhibits (a number of which approach 100 pages in length) in Patent Owner’s discussion. See id. Even less helpful, the Response does not inventors actually worked on the claimed invention. See id. That is, the Response does not state exactly what in the “corroborating documentation” actually corroborates the inventors’ testimony or itself shows diligence. If anything, the Response points out that the inventors were engaged in other activities: “Justin Marston had numerous other obligations running the company BlueSpace, and Paul Marston was working a full-time position as a lecturer on statistics.” PO Resp. 49; PO Sur-reply 15–16. We do not fault the Marstons for engaging in other activities, but Patent Owner’s discussion of the Marstons’ other activities and mere conclusory assertions of diligence, without more, do not show that the Marstons were reasonably diligent as to the relevant activities during the critical time period. Simply put, Patent Owner’s Response does not adequately explain exactly how or why the evidence supports its argument that the inventors were reasonably diligent throughout the critical period. We decline the invitation to sift through the hundreds of pages spanning dozens of exhibits in search of evidence and reasons supporting Patent Owner’s assertion of diligence.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“combined Rose and Bieganski. Rose and Bieganski are both concerned with recommending content to a user based on other users’ content preferences. Ex. 1006, code (57); Ex. 1007, code (57). Petitioner, supported by Dr. Fox, adequately shows that Bieganski discloses an improved technique for selecting which other users’ preferences are considered in a recommendation. Pet. 71 (citing Ex. 1003 ¶¶ 235–236), 75 (citing Ex. 1003 ¶¶ 247–248). We agree that improving Rose’s content ranking system using Bieganski’s content recommendation technique sufficiently motivates the combination. See KSR Int’l, 550 U.S. 417 (noting that where “a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious”). Patent Owner’s argument that Bieganski’s approach is not an improvement over Rose because Rose “teach[es] that feedback from all users is valuable” (PO Sur-reply 9–10 (citing Ex. 2029 ¶ 199)) has two faults. First, that argument mischaracterizes Rose. We find no description in Rose which states that feedback from all users is “valuable” such that selecting certain users is not an improvement. Rather, Rose aligns with Bieganski’s selection of relevant users because Rose emphasizes feedback from similar users by adjusting the weight given to feedback from users who are more or less correlated. Ex. 1006, 6:64–7:1, 7:10–34 (“Rjk is the correlation of users i and k, the Vkj is the weight indicating the feedback of user k on document j.”). Second, even if Rose describes an embodiment where feedback from all users is considered, that does not preclude motivating improvement. See PAR Pharm., Inc. v. TWI Pharms., Inc., 773 F.3d 1186, 1197–98 (Fed. Cir. 2014) (noting it is not necessary to show that a combination is “the best option, only that it be a suitable option”).” slip op. at 47
Patent outcomesUS 7,716,217 unpatentable§ 102 anticipation§ 103 obviousnesscites Phillips · KSRPatents in suitUS 7,716,217
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.