• Jiangsu Favored Nanotechnology Co., Ltd. v. P2i Ltd.All claims unpatentable
  PTAB · Apr 11, 2025 · IPR2024-00380 · APJ Sheldon M Mcgee · IPR · Final written decision

  Claims 1–5, 7, and 9–14 are unpatentable as obvious over Cohen and Legein or Francesch and Legein; Petitioner’s motion to strike is denied as moot.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for petitioner

    “The parties agree that a person of ordinary skill in the art in the field of the ’087 patent in June 20154 “would have had at least a bachelor’s degree in a field such as chemistry, physics, or chemical engineering, as well as at least two years of experience with plasma-polymerization techniques.” Pet. 20 (citing Ex. 1002 ¶¶ 22–29); PO Resp. 13 (Patent Owner stating that it “does not dispute this characterization of the level of ordinary skill in the art.”); see also PO Sur-reply 1–2 (noting both parties’ agreement on the education and experience level of the ordinarily skilled artisan).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “On the fully developed trial record, we determine that no claims need an express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “Because of Patent Owner’s shifting definitions of the education and experience level of the ordinarily skilled artisan, it is unclear on the complete record what precise definition Patent Owner and Dr. Senkevitch are applying when arguing the skilled artisan’s capabilities. PO Resp. 13, 22–27, 31–32, 34–40; PO Sur-reply 1–6, 11–13; Ex. 2007 ¶¶ 30, 31, 33, 34, 37, 40, 52–55, 60, 68, 74, 76, 77, 80–86, 89, 91, 94, 95, 100, 102–105, 108, 110, 111, 113–116, 118–120, 122, 124, 127–134. We, therefore, give Dr. Senkevitch’s testimony regarding the capabilities of a person of ordinary skill in the art minimal weight, which leaves us with Patent Owner’s insufficiently supported arguments regarding the skilled artisan’s capabilities. PO Resp. 13, 22–27, 31–32, 34–40; PO Sur-reply 1–6, 11–13. Moreover, as Petitioner correctly points out, the ʼ087 patent expressly teaches that the precise conditions for forming a protective polymeric coating “will vary depending upon factors such as, without limitation, the nature of the monomer compound, the crosslinking agent, the substrate, as well as the desired properties of the coating” and that such “conditions can be determined using routine methods.” Ex. 1001 15:1–15:5 (emphasis added); Pet. Reply 17. Where the patent itself leaves to the judgment of an ordinarily skilled artisan the assessment of these factors to ascertain suitable conditions for forming the protective coating, we find persuasive Petitioner’s view that it would have been well within the level of ordinary skill to ascertain such suitable conditions.” slip op. at 20

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “We disagree with Patent Owner. Although the claims of the ʼ087 patent recite obtaining the protective cross-linked polymeric coating “by exposing the device or component to a plasma,” the field of endeavor analysis in an analogous art inquiry does not exclusively turn on the claims at issue, but rather takes account of the entirety of a patent’s disclosure. See In re Bigio, 381 F.3d 1320, 1326 (Fed. Cir. 2004) (explaining that “the PTO must show adequate support for its findings on the scope of the field of endeavor in the application’s written description and claims” (emphasis added)); In re Mettke, 570 F.3d 1356, 1359 (Fed. Cir. 2009) (rejecting an argument that the field of endeavor was limited to a claimed “Internet terminal” when “the specification describes various communication media, including facsimile machines and email, as related to the invention.”). This is significant here because the ʼ087 patent discloses that “[t]he … invention relates to protective coatings” and specifically “relates to protective coatings for electronic or electrical devices and components thereof, and methods of forming such coatings.” Ex. 1001, 1:14–17. Based on this disclosure, we find that the ʼ087 patent’s field of endeavor relates to “protective coatings for electronic or electrical devices and components thereof” broadly, not just those formed on such devices or components via a plasma polymerization process as asserted by Patent Owner. Id. Although Cohen does not explicitly disclose that its crosslinked polymers constitute a “protective coating,” Cohen does disclose that its “copolymerizable mixture can be cast into films” (Ex. 1004, 2:61–62), that the polymerization can “effected in situ,” and that the polymers may be used in “numerous” electrical applications (id. at 5:17–25). Tr. 8:9–10:2, 27:2– 21; see Pet. Reply 5 (explaining how “Cohen described insulating polymers that could be applied as films and be used to protect substrates including cables and electrical coils.” (citing Ex. 1004, 2:60–63, 5:13–25)). These disclosures suggest strongly that Cohen’s crosslinked polymers––if cast into a film or formed in situ on an electrical device or component––would serve as a protective coating on that electrical device or component, even though Cohen does not expressly refer to its crosslinked polymers ipsis verbis as a “protective coating.” Thus, we find that Cohen is within the field of endeavor of the ʼ087 patent.” slip op. at 15

  Patent outcomesUS 11,041,087 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,041,087
• Intuit Inc. v. Samesurf, Inc.All claims unpatentable
  PTAB · Jun 25, 2024 · IPR2023-00339 · APJ Barbara A Benoit · IPR · Final written decision

  Claims 1–18 are unpatentable as obvious over Lebrun and Wang; the Board did not reach the separate Prajapat and Wang challenge.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “of the parties, we found that a person of ordinary skill in the art (“POSITA”) “would have had (1) at least a bachelor’s degree in computer science, computer engineering, or electrical engineering, or a similar field, and (2) at least two years of work experience in software development and/or web-based software,” which reflected Petitioner’s proposal. Dec. 11–12; see Dec. 9–12 (discussing the respective proposals and level of ordinary skill reflected in the challenged patent and asserted prior art). Patent Owner accepts this level of ordinary skill in the art. PO Resp. 42. Accordingly, we apply this determination of the level of ordinary skill in the art for purposes of this Decision.” slip op. at 12

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner

    “information related to a shared web browsing interaction” is interchangeable with “web browsing interaction data” and, as a result, this portion of the specification should limit the claim term. PO Resp. 18–19 (quoting Ex. 2004 ¶ 40). The quoted portion of Mr. Friedman’s testimony, however, addresses other terms in the specification and not “information related to a shared web browsing interaction.” PO Resp. 18–19 (quoting Ex. 2004 ¶ 40). As such, the testimony cited by Patent Owner does not support Patent Owner’s position. Accordingly, we determine that the patentee has not acted as a lexicographer to set forth a definition of “web browsing interaction data” in the written description. c. Plain and Ordinary Meaning Because the patentee has not acted as a lexicographer to set forth a definition of “web browsing interaction data,” we look to the plain and ordinary meaning of the term. See Edwards Lifesciences LLC v. Cook Inc., from the ordinary meaning will be adopted “when the patentee acted as his own lexicographer and clearly set forth a definition of the disputed claim term in either the specification or prosecution history” (internal quotation marks omitted)); Pet. Reply 5 (Petitioner arguing that “web browsing interaction data” should be afforded its plain and ordinary meaning) (citing Ex. 1034 ¶ 13). Notably, both Dr. Lieberman and Mr. Friedman agree that the plain and ordinary meaning of “web browsing interaction data” is sufficient to inform how one of ordinary skill would have understood the term. Ex. 1034 ¶ 13 (Dr. Lieberman testifying: “The plain meaning of ‘web browsing interaction data’ is data related to web browsing interactions. No additional definition or limitation is required in my opinion, nor is there any special or specific meaning given to the term in the specification of the ’145 patent.”); Ex. 1033, 171:5–16 (Patent Owner’s expert, Mr. Friedman, testifying that “the plain and ordinary meaning is sufficient.”). According to Petitioner, the plain and ordinary meaning is “data related to web browsing interactions.” Pet. Reply 5 (citing Ex. 1034 ¶ 13); Ex. 1034 ¶ 13 (“The plain meaning of ‘web browsing interaction data’ is data related to web browsing interactions.”). Patent Owner’s expert declined to opine on what the plain and ordinary meaning of “web browsing interaction data” other than it excludes webpages and partially filled webpages related to a web browsing interaction. See Ex. 1033, 171:5–16. slip op. at 27

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “Accordingly, we conclude that the plain language of the claims does not require “web browsing interaction data” to be limited to data describing interaction performed on a website by a host device. We turn to the specification because the meaning of “web browsing interaction data” is informed “not only in the context of the particular claim in which the disputed term appears, but in the context of the entire patent, including the specification.” Phillips, 415 F.3d at 1313. The written description does not provide a definition or clear meaning for “web browsing interaction data.” Patent Owner acknowledges the term is not expressly used in the written description. PO Resp. 17. Patent Owner, however, identifies “information related to a shared web browsing interaction” as a term that is interchangeable with “web browsing interaction data.” PO Resp. 18, 29. We recognize the specification term “information related to a shared web browsing interaction” is substantially similar10 to Petitioner’s proposed plain and ordinary meaning of “web browsing interaction data” as “data related to web browsing interactions.” 11 Patent Owner identifies three passages that each describe the present invention as receiving information related to a shared web browsing interaction performed by a host device and performing the shared web browsing interaction based on the received information. PO Resp. 17–18 (block quoting Ex. 1001, Abstract, 3:10–24). The identified passages, however, do not show intention to manifestly limit “web browsing interaction data” to data describing interactions” slip op. at 25

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “forth by Petitioner (Pet. 22–34) discloses or suggests all limitations recited by claim 1, we consider Petitioner’s conclusion that it would have been obvious to combine Lebrun and Wang in the manner proposed to arrive at the claimed invention. See Pet. 19–22. (i) Articulated Reasoning To demonstrate obviousness, “there must be some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” KSR, 550 U.S. at 418. Petitioner contends that one of ordinary skill would have been motivated to combine Wang’s activating a session invitation with Lebrun’s invitation to join a group-surfing session. Pet. 28. Specifically, Petitioner contends that “activating an invitation via a designated URL address would further enable” Lebrun’s group-surfing server “to coordinate and manage the group-surfing session, which would further Lebrun’s objective of providing an ‘improved technique for group access to web sites.’” Pet. 28 (citing Ex. 1005, 7:1). We agree with Petitioner that activating an invitation via a designated URL address would be a technique that helps coordinate a group-surfing session and would enable multiple related users being able to access “substantially the same” slip op. at 63

  Patent outcomesUS 9,185,145 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,185,145
• Micron Technology, Inc. v. Katana Silicon Technologies LLCAll claims unpatentable
  PTAB · May 13, 2024 · IPR2023-00071 · APJ Julia Heaney · IPR · Final written decision

  Claims 3–5, 8, 11, 20–22, 27–29, 31, and 33 are unpatentable as obvious over the stated combinations of prior art and skilled-artisan knowledge.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner

    “On the fully developed record, we find that Petitioner’s construction, “a layer that adheres,” is more strongly supported by the evidence than Patent Owner’s construction, “a pre-formed layer that is adhered.” Our analysis begins with the claim language. The term “adhesion layer” appears in each of the ’806 patent’s independent claims, which include both method and device claims. See, e.g., Ex. 1001, 13:44–63 (claim 1 directed to a “semiconductor device”); id. at 17:58–18:17 (claim 30 directed to a “method of manufacturing a semiconductor device”). Claim 1 recites “a first semiconductor chip having a first adhesion layer adhered to its back surface” and “a second semiconductor chip having a second adhesion layer adhered to its back surface.” Id. at 13:49–51, 13:54–56 (emphasis added). Claim 30 recites the steps of “forming a first insulating adhesion layer on a back surface of a first wafer” and “forming a second insulating adhesion layer on a back surface of a second wafer.” Id. at 17:60–62, 18:3–5 (emphases added). In the absence of contrary evidence, we must assume that the term “adhesion layer” has the same meaning in all claims of the ’806 patent. In re Varma, 816 F.3d 1352, 1363 (Fed. Cir. 2016) (“the principle that the same phrase in different claims of the same patent should have the same meaning is a strong one, overcome only if ‘it is clear’ that the same phrase has different meanings in different claims,” quoting Fin Control Sys. Pty, Ltd. v. OAM, Inc., 265 F.3d 1311, 1318 (Fed. Cir. 2001)). The language of claim 30 and similarly worded claims of the ’806 patent suggests strongly that an “adhesion layer” may be formed in situ on the back surface of a wafer and need not be pre-formed, as argued by Patent Owner. The testimony of Patent Owner’s expert, Mr. Elenius, supports this interpretation. See Ex. 2014 ¶¶ 43, 50 (testifying that a person of ordinary skill in the art “would recognize that there are multiple methods of forming an ‘adhesion layer’ on the back surface of the semiconductor chip” and that “[p]astes and other adhesives, adhesive agents, adhesive layers or other material that are dispensed onto a substrate or chip back are formed into a layer over time as they harden through curing” (emphasis added)). Thus, the language of claims 30 and 31 does not support Patent Owner’s construction that the “adhesion layer” must be a pre-formed layer that is adhered. Cf. PO Resp. 22–25 (arguing for that construction).” slip op. at 17

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Citing testimony from Dr. Suhling, Petitioner asserts that a person of ordinary skill in the art at the priority date of the ’806 patent would have had i) a bachelor-level degree in electrical engineering, mechanical engineering, material science, or a related subject and five or more years of experience working in the field of semiconductor packaging; ii) a Master’s-level degree in mechanical engineering, electrical engineering, material science, or a related field, and at least 1-3 years of experience in the design/development of semiconductor packages; or iii) a Ph.D.- level degree in mechanical engineering, material science, electrical engineering, or a related field, and at least some experience in the area of semiconductor packaging. Pet. 17–18 (citing Ex. 1002 ¶¶ 28–32). Petitioner further states that “[a]dditional education may substitute for professional experience, and significant work experience may substitute for formal education.” Pet. 18. Patent Owner’s declarant, Mr. Elenius, states that a person of ordinary skill in the art would have had “a bachelor’s degree in electrical, mechanical or materials engineering and two to three years of experience in the design or development of semiconductor manufacturing, or the equivalent.” Ex. 2014 ¶ 32. Mr. Elenius further states that “[a]dditional graduate education could substitute for professional experience, or significant experience in the field could substitute for formal education.” Id. For purposes of this Decision, we find no meaningful differences” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “3. Reasons to Combine Petitioner contends that it would have been obvious for a person of ordinary skill in the art to combine Ball’s teachings of stacking chips with Mostafazadeh’s process for applying adhesive to create individual chips with adhesive backsides. Pet. 28–29. Petitioner contends that a person of ordinary skill would have been motivated to combine the teachings of Ball and Mostafazadeh for several reasons, including to provide a more efficient manufacturing process for multichip modules and to simplify the stacking process. Pet. 28–31. Patent Owner argues that a person of ordinary skill would not have been motivated to combine Mostafazadeh with Ball because there would have been no reasonable expectation of success and the combination would not have resulted in a functioning semiconductor device. PO Resp. 39. Patent Owner asserts that Petitioner’s combination of Ball and Mostafazadeh would fail for multiple reasons and that Mostafazadeh does not describe multi-chip stacked mounting. Id. at 39–52. Having considered the evidence and arguments, we determine that the preponderance of the evidence favors Petitioner. Petitioner demonstrates persuasively that a person of ordinary skill in the art would have had reasons to combine Ball’s stacked multichip module with Mostafazadeh’s process for applying adhesive at the wafer stage and then dicing to create individual chips with adhesive backsides. Pet. 28–31. In particular, Petitioner shows that a person of ordinary skill in the art would have considered Mostafazadeh’s teaching of applying the adhesive to a wafer surface and then subsequently dicing the wafer in order to provide a more efficient manufacturing process for multichip modules and to simplify Ball’s process of stacking chips. Id.; see KSR, 550 U.S. at 417 (stating that the “mere application of a known technique to a piece of prior art ready for the improvement” suggests obviousness). The teachings of both Ball and Mostafazadeh support Petitioner’s combination. Ball teaches a stacked multichip module using flip-chip and wire bond interconnections, where a lower chip is flip-chip connected to a substrate using metal bumps, and an upper chip is wire bond connected to the substrate. Ex. 1005, Abstract, 3:42–64, 4:58–59, 5:3–12, 5:18–20, 5:23– 27, Fig. 1. Ball teaches that the upper chip is attached to the lower chip in a back-to-back arrangement with a layer of adhesive applied over a back side of the lower chip. Id. Mostafazadeh teaches a method for applying integrated circuit dies to support surfaces. Ex. 1003, Abstract. In Mostafazadeh’s method, an adhesive coating is formed on a surface of a semiconductor wafer, the adhesive coating is dried, and the semiconductor wafer is diced to form integrated circuit dies, each having an adhesive layer on its mounting surface, i.e., its back surface. Id. at 3:5–11, 5:20–25, 7:9–11, 7:29–8:2, Fig. 2 (steps 104–110). A selected die is then attached to an associated support surface by placing the adhesive layer of the selected die in contact with the associated support surface. Id. at 3:11–13, 8:10–12, Fig. 2 (steps 112–118).” slip op. at 33

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “After considering the parties’ arguments and evidence, we determine that Petitioner meets its burden of proof for claim element [3d]. Our finding is supported by Figure 1 of Ball, which depicts a second chip mounted to a first chip in a back-to-back arrangement. Ex. 1002 ¶ 158; Ex. 1005, Fig. 1. More particularly, Ball’s Figure 1 shows that back side 32 of upper die 12 (the claimed “second semiconductor chip”) is mounted to back side 30 of lower die 14 (the claimed “first semiconductor chip”) by adhesion layer 28. Ex. 1005, 5:18–20. Relying on Dr. Suhling’s testimony, Petitioner shows persuasively that “a circuit is formed on the front surface 34 of upper die 12 . . . , as evidenced by bonding pads 36 and wires 38 connecting the upper die’s circuitry to the wiring layer on substrate 16.” Pet. 41; Ex. 1002 ¶ 159. We credit Dr. Suhling’s unrebutted testimony that, “[b]ecause the circuitry is on the front side of upper die 12, a [person of ordinary skill in the art] would know that the back surface adhesive layer is ‘where a circuit is not formed.’” Ex. 1002 ¶ 159. Patent Owner argues that, to meet claim elements [3b] and [3d], “a reference must show that an adhesion layer extends to cover the entire back surface of the second semiconductor chip where a circuit is not formed.” PO Resp. 30. We find no support in the claim language or other intrinsic evidence for Patent Owner’s argument. In our view, the phrase “back surface where a circuit is not formed” identifies the back side of the chip as opposed to the front side, where a circuit is formed. Ex. 1001, 14:26–27 (claim element [3d]). Our interpretation is supported by the claim language as a whole. Claim element [3b], for example, recites “a first semiconductor chip having a circuit forming on its front surface and an adhesion layer adhered to its back surface.” Id. at 14:17–19 (emphasis added). In this” slip op. at 47

  Patent outcomesUS RE38,806 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR
• Micron Technology, Inc. v. Katana Silicon Technologies LLCAll claims unpatentable
  PTAB · May 13, 2024 · IPR2023-00072 · APJ Julia Heaney · IPR · Final written decision

  Claims 1, 2, 6, 7, 9, 10, 12–19, 23–26, 30, and 32 are unpatentable as obvious over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Although the proposals for the level of skill in the art by the parties’ declarants have differences in wording, we find no meaningful differences between the parties’ respective definitions that would materially alter the outcome of this Decision. Nevertheless, based on our review of the ’806 patent, the types of problems and solutions described in the ’806 patent, and cited prior art, we adopt and apply Petitioner’s definition of the level of ordinary skill in the art.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionGranted

    “On the fully developed record, we find that Petitioner’s construction, “a layer that adheres,” is more strongly supported by the evidence than Patent Owner’s construction, “a pre-formed layer that is adhered.”” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Petitioner shows persuasively that a person of ordinary skill in the art would have had a reasonable expectation of success in combining Mostafazadeh with Ball and Fogal. Pet. 32–33. The evidence discussed above concerning reasons to combine supports a reasonable expectation of success. We are also persuaded by Dr. Suhling’s testimony that the “combination of Ball, Fogal, and Mostafazadeh would require no modification of the multichip modules in Ball and Fogal: rather Mostafazadeh merely explains in more detail methods known in the art for creating chips with adhesive surfaces.” Ex. 1002 ¶ 239; see also id. ¶¶ 62– 69 (describing prior art methods for applying adhesive to the backside of a wafer). For the foregoing reasons, we find that Petitioner has demonstrated that a person of ordinary skill in the art would have had a reasonable expectation of successfully combining Ball, Fogal, and Mostafazadeh.” slip op. at 46

  • ExcludeOther

    “We do not discuss or cite any of these exhibits in this Decision, or rely on any of them in reaching our determination that all of the challenged claims are unpatentable. Because their presence in the record would not affect our analysis in this Decision, we dismiss as moot Petitioner’s motion with respect to these exhibits.” slip op. at 72

  Patent outcomesUS RE38,806 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR
• Micron Technology, Inc. v. Katana Silicon Technologies LLCAll claims unpatentable
  PTAB · May 13, 2024 · IPR2023-00073 · APJ Sheldon M Mcgee · IPR · Final written decision

  Claims 1–15 are unpatentable under §103: the Board found the asserted combinations taught the limitations, with motivation to combine and a reasonable expectation of success.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “The claim language, “forming” an “adhesion layer on a back surface,” suggests strongly that an “adhesion layer” may be formed in situ on the back surface of a wafer. The testimony of Patent Owner’s expert, Mr. Elenius, supports this interpretation. See Ex. 2014 ¶¶ 43, 50 (testifying that a person of ordinary skill in the art “would recognize that there are multiple methods of forming an ‘adhesion layer’ on the back surface of the semiconductor chip” and that “[p]astes and other adhesives, adhesive agents, adhesive layers or other material that are dispensed onto a substrate or chip back are formed into a layer over time as they harden through curing” (emphasis added)). Thus, the language of the claims of the ʼ879 patent does not support Patent Owner’s construction that the “adhesion layer” must be a preformed layer that is adhered. Cf. PO Resp. 21–23 (arguing for that construction).” slip op. at 16

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “For purposes of this Decision, we find no meaningful differences between the parties’ respective definitions that would materially alter the outcome of this Decision. Nevertheless, based on our review of the ’879 patent, the types of problems and solutions described in the ’879 patent, and cited prior art, we adopt and apply Petitioner’s definition of the level of ordinary skill in the art.” slip op. at 13

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “Mostafazadeh, could overflow.” PO Resp. 41, 42 (citing Ex. 2014 ¶ 121). According to Patent Owner, the downward pressure during mounting “could cause adhesive to squeeze out.” Id. at 41. We find that Patent Owner’s argument and the corresponding testimony of Mr. Elenius are speculative and do not outweigh Petitioner’s evidence of obviousness. The overflow issue was recognized and addressed by Mostafazadeh. Contrary to Patent Owner’s argument, Mostafazadeh provides explicitly that its adhesive layer “covers an entire mounting surface 190 of the selected integrated circuit dies 182 and does not extend beyond a boundary of the mounting surface 190.” Ex. 1003, 10:6–9 (emphasis added). Additionally, Mostafazadeh teaches that when “the adhesive layer is rolled on, it is exactly the same size as the mounting surface and is quite even. Thus, when the die is attached to its supporting surface the adhesive does not extend beyond the mounting surface of the die.” Id. at 9:15–18. Further, Mostafazadeh teaches that its process avoids the adhesive jutting around the edges of the die. Id. at 2:26–28. These teachings support that a person of ordinary skill in the art would have had a reasonable expectation of successfully applying Mostafazadeh’s die attachment method to Ball’s multichip device while avoiding adhesive overflow. Next, Patent Owner argues that Petitioner’s combination would fail” slip op. at 40

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “preponderance of the evidence favors Petitioner. Petitioner demonstrates persuasively that a person of ordinary skill in the art would have had reasons to combine Ball’s stacked multichip module using flip-chip and wire bond connections with Mostafazadeh’s process for applying adhesive to create individual chips with adhesive backsides. Pet. 25–28. In particular, Petitioner shows that a person of ordinary skill in the art would have considered Mostafazadeh’s teaching of applying the adhesive to a wafer surface and then subsequently dicing the wafer in order to provide a more efficient manufacturing process for multichip modules and to simplify Ball’s process of stacking chips. Id.; see KSR, 550 U.S. at 417 (stating that the “mere application of a known technique to a piece of prior art ready for the improvement” suggests obviousness). The teachings of both Ball and Mostafazadeh support Petitioner’s” slip op. at 33

  Patent outcomesUS 6,352,879 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 6,352,879
• T-Mobile USA v. Dali Wireless, Inc.All claims unpatentable
  PTAB · Mar 5, 2024 · IPR2023-00830 · APJ Sharon Fenick · IPR · Final written decision

  Claims 1–19 are unpatentable: claims 1–5, 8–11, 13–16, 18, and 19 are anticipated by Wu; claims 6, 7, 12, and 17 are obvious over Wu and Sabat-552.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “an educational background in electrical engineering and experience in the design of wireless communication systems,” and “[m]ore particularly, a POSA would be a person with a bachelor’s degree in electrical engineering (or a similar technical degree or equivalent work experience) and at least 3 years of experience working with wireless communication systems.” PO Resp. 13. We found in the Decision on Institution that Patent Owner’s definition was generally consistent with Petitioner’s definition, with the exception of requiring 3 years or more (as opposed to 2 to 3 years) of work experience in wireless communication systems and, for the purpose of institution, we adopted Petitioner’s provided definition for the level of skill of a person of ordinary skill in the art as reasonable and consistent with the prior art. Dec. on Inst. 20–21. The record does not contain further argument or evidence regarding the level of skill of one of ordinary skill in the art, and we again adopt Petitioner’s definition, which does not encompass an open-ended (“at least 3 years”) amount of experience and which is supported by the testimony of Dr. open-ended terminology from Patent Owner’s definition and adopt that definition.” slip op. at 15

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “b) Our Conclusion We conclude that the proper construction of “digital representation of a . . . set of radio resources” encompasses user payload data packaged in or combined with RF carrier channels. We further conclude that “digital representation of a . . . set of radio resources” is not limited to and does not necessarily include configuration information that is required to or used to reconfigure remote radio units.” slip op. at 18

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “packetize” or “packetizing” as recited in claims 2, 9, and 14. PO Resp. 19– 20; Pet. Reply 5–6. Patent Owner argues that we should construe “packetize” to mean “create data packets that include destination information.” PO Resp. 19–20. Patent Owner argues that this is consistent with how the Board previously interpreted this claim term in the 00571 IPR. PO Resp. 19 (citing Ex. 1017). We do not need to construe “packetizing” because collateral estoppel prevents Patent Owner from arguing that Wu does not disclose “packetizing” as explained below. We also do not need to construe any other terms to resolve the disputes before us. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms ... that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng'g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). slip op. at 22

  • PTAB / AIA Trials › §315(e) estoppelEstoppel appliesDecided for petitioner

    “When deciding whether issue preclusion applies, we consider whether: (1) a prior action presents an identical issue; (2) the prior action actually litigated and adjudged that issue; (3) the judgment in that prior action necessarily required determination of the identical issue; and (4) the prior action featured full representation of the estopped party. VirnetX Inc. v Apple, Inc., 909 F.3d 1375, 1377 (Fed. Cir. 2018) (citing Stephen Slesinger, Inc. v. Disney Enterprises, Inc., 702 F.3d 640, 644 (Fed. Cir. 2012)). To the extent Petitioner asks us to consider the 01473 IPR institution decision for issue preclusion, we do not. In that decision the Board reached a finding based on the institution standard (showing of a “reasonable likelihood that the petitioner will prevail,” 35 U.S.C. § 314(a)) rather than proof by a preponderance of the evidence, which is before us now (35 U.S.C. § 316(e)). Ex. 1016. Thus, issues before us here were not presented and adjudged in that institution decision. Regarding the 01473 IPR adverse judgment decision, that decision did not require determination of any issues before us, as that decision was based on Patent Owner canceling the challenged claims rather than any determination regarding unpatentability that had been shown by a preponderance of the evidence. Ex. 1014. 2. Collateral Estoppel With Respect to the 00571 IPR We find and determine that the final written decision in the 00571 IPR, and the Federal Circuit’s CommScope decision affirming that decision, satisfies the conditions for applying collateral estoppel because the 00571 discloses materially the same claim limitations7 challenged here, and Patent Owner had full representation throughout the proceedings. Setting aside the factors of issue preclusion for a moment, our reviewing court’s affirmance of our final written decision in CommScope is persuasive authority that supports our prior construction of “packetizing” and Petitioner’s showing that Wu teaches the disputed packetizing limitations under that construction. In addition, issue preclusion prevents Patent Owner from re-litigating the issue of whether Wu teaches materially the same disputed limitation. See Pet. Reply 24; Ex. 1017, 31–34 (final written decision determining obviousness of claims 9, 10, 14, and 16 of the ’473 patent over Wu and Sabat-426); Ex. 1072, 5 (summarizing the final written decision regarding the packetizing limitations), 10–16 (finding no error in the determinations regarding the packetizing limitations).” slip op. at 12

  Patent outcomesUS 10,334,499 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,334,499
• T-Mobile USA v. Dali Wireless, Inc.All claims unpatentable
  PTAB · Mar 5, 2024 · IPR2022-01293 · APJ Sharon Fenick · IPR · Final written decision

  Claims 1–19 are unpatentable: claims 1–5, 8–11, 13–16, 18, and 19 as anticipated by and obvious over Wu; claims 6, 7, 12, and 17 as obvious over Wu and Sabat-552.

  RulingsFinal written decision

  • PTAB / AIA Trials › §315(e) estoppelEstoppel appliesDecided for petitioner

    “whether: (1) a prior action presents an identical issue; (2) the prior action actually litigated and adjudged that issue; (3) the judgment in that prior action necessarily required determination of the identical issue; and (4) the prior action featured full representation of the estopped party. VirnetX Inc. v Apple, Inc., 909 F.3d 1375, 1377 (Fed. Cir. 2018) (citing Stephen Slesinger, Inc. v. Disney Enterprises, Inc., 702 F.3d 640, 644 (Fed. Cir. 2012)).” slip op. at 12

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “would have a bachelor’s degree in electrical engineering (or equivalent field) with 2–3 years of work experience in wireless communications.” Pet. 21 (citing Ex. 1003 ¶¶ 20–22). Patent Owner argues that one of ordinary skill in the art “would have an educational background in electrical engineering and experience in the design of wireless communication systems,” and “[m]ore particularly, a POSA would be a person with a bachelor’s degree in electrical engineering (or a similar technical degree or equivalent work experience) and at least 3 years of experience working with wireless communication systems.” PO Resp. 13. We found in the Decision on Institution that Patent Owner’s definition was generally consistent with Petitioner’s definition, with the exception of requiring 3 years or more (as opposed to 2 to 3 years) of work experience in wireless communication systems and, for the purpose of institution, we adopted Petitioner’s provided definition for the level of skill of a person of ordinary skill in the art as reasonable and consistent with the prior art. Dec. on Inst. 20–21. The record does not contain further argument or evidence regarding the level of skill of one of ordinary skill in the art, and we again adopt Petitioner’s definition, which does not encompass an open-ended (“at least 3 years”) amount of experience and which is supported by the testimony of Dr.” slip op. at 15

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “a . . . set of radio resources” encompasses user payload data packaged in or combined with RF carrier channels. We further conclude that “digital representation of a . . . set of radio resources” is not limited to and does not necessarily include configuration information that is required to or used to reconfigure remote radio units.” slip op. at 18

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “We do not need to construe “packetizing” because collateral estoppel prevents Patent Owner from arguing that Wu does not disclose “packetizing” as explained below. We also do not need to construe any other terms to resolve the disputes before us. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms ... that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng'g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 22

  Patent outcomesUS 10,334,499 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,334,499
• AT&T Corp. / AT&T Communications LLC et al. v. Dali Wireless, Inc.All claims unpatentable
  PTAB · Mar 5, 2024 · IPR2023-00818 · APJ Sharon Fenick · IPR · Final written decision

  Claims 1–19 are unpatentable as obvious over Wu alone or Wu with Sabat-552.

  RulingsFinal written decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “institution of inter partes review of claims 1–19 (“the challenged claims”) of U.S. Patent No. 10,334,499 B2 (Ex. 1001, “the ’499 patent”). Dali Wireless Inc. (“Patent Owner”) filed a Preliminary Response (Paper 7, “Prelim. Resp.”). Ericsson filed a Preliminary Reply (Paper 9). We determined that the information presented in the Petition established that there was a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims, and therefore we instituted this proceeding on March 9, 2023, as to all challenged claims and all grounds of unpatentability. Paper 11 (“Dec. on Inst.”). We granted a request in IPR2023-00831 by AT&T Corp., AT&T Communications LLC, AT&T Services, Inc., AT&T Mobility LLC, and AT&T Mobility II LLC to be joined as a Petitioner in this proceeding. Paper 19. After a joint request of Patent Owner and Ericsson, we terminated the proceeding as to Ericsson, leaving AT&T Corp., AT&T Communications LLC, AT&T Services, Inc., AT&T Mobility LLC, and AT&T Mobility II LLC (“Petitioner”) as the lead (and sole) petitioner in this proceeding. Papers 16, 17, 20.” slip op. at 2

  • PTAB / AIA Trials › §315(e) estoppelEstoppel does not applyDecided for petitioner

    “When deciding whether issue preclusion applies, we consider whether: (1) a prior action presents an identical issue; (2) the prior action actually litigated and adjudged that issue; (3) the judgment in that prior action necessarily required determination of the identical issue; and (4) the Apple, Inc., 909 F.3d 1375, 1377 (Fed. Cir. 2018) (citing Stephen Slesinger, Inc. v. Disney Enterprises, Inc., 702 F.3d 640, 644 (Fed. Cir. 2012)). To the extent Petitioner asks us to consider the 01473 IPR institution decision for issue preclusion, we do not. In that decision the Board reached a finding based on the institution standard (showing of a “reasonable likelihood that the petitioner will prevail,” 35 U.S.C. § 314(a)) rather than proof by a preponderance of the evidence, which is before us now (35 U.S.C. § 316(e)). Ex. 1004. Thus issues before us here were not presented and adjudged in that institution decision. Regarding the 01473 IPR adverse judgment decision, that decision did not require determination of any issues before us, as that decision was based on Patent Owner canceling the challenged claims rather than any determination regarding unpatentability that had been shown by a preponderance of the evidence. Ex. 1005.” slip op. at 10

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The record does not contain further argument or evidence regarding the level of skill of one of ordinary skill in the art, and we again adopt Petitioner’s definition, which does not encompass an open-ended (“at least 3 years”) amount of experience and which is supported by the testimony of Dr. Houh. We would reach the same conclusions if we were to remove the open-ended terminology from Patent Owner’s definition and adopt that definition.” slip op. at 14

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “a . . . set of radio resources” is not limited to and does not necessarily include configuration information that is required to or used to reconfigure remote radio units. As Petitioner argues, there does not appear to be any indication in the specification and other intrinsic evidence that “digital representation” should be given more than its ordinary meaning, or that an underlying construction of “radio resources” would not be applied to this claim term, which explicitly includes “radio resources.” Pet. Reply 9–10 (citing Ex. 1001, representation” in the specification of the ’499 patent). Our construction is further supported by the language of the claims, which requires that each “set of radio resources” is “for transmission at an antenna of the first remote unit.” Ex. 1001, 14:17–19, 14:22–24, 15:3–5, 15:8–10, 16:6–8, 16:11–13. With respect to the “digital representation” of “set[s] of radio resources,” the specification of the ’499 patent describes that in the downlink (base station to DRU antenna) path for data, RF signals received at the DAU from base station(s), are down-converted, digitized, and further processed resulting in “independently serialized, parallel data streams” that are delivered to DRUs. Ex. 1001, 4:63–5:12. Petitioner contends that this description of delivery of a digitized version of an RF signal to DRUs describes the sending/transmission of a digital representation of the radio. Pet. 9–10. While Patent Owner appears to argue that a “digital representation” of a radio resource would be only an “identifier” of, e.g., an RF carrier (PO Resp. 18), this does not appear to be supported by the specification or the cited testimony of Dr. Chrissan. We do not see a reason to relate “digital representation of . . . a set of radio resources” in the claims to the description in the ’499 patent specification of the remote configuration of DRU parameter settings via the DAU, including detecting or determining radio resources assigned to a DRU and configuring the DRU, turning on and off individual carriers transmitted and received by a DRU. PO Resp. 16–18 (citing Ex. 1001, 4:50–62, 6:31–44, 7:44–50, 12:15–39, 12:58–13:2). No cited portion of the specification describes these signals sent from a DAU to control a DRU as digital representations of a set of radio resources. While Patent Owner cites, in support, Dr. Chrissan’s declaration, Dr. Chrissan does” slip op. at 16

  Patent outcomesUS 10,334,499 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,334,499
• AT&T Corp. / AT&T Communications LLC et al. v. Dali Wireless, Inc.All claims unpatentable
  PTAB · Mar 5, 2024 · IPR2022-01419 · APJ Sharon Fenick · IPR · Final written decision

  Claims 1–19 are unpatentable as obvious over Wu alone or Wu with Sabat-552.

  RulingsFinal written decision

  • PTAB / AIA Trials › §315(e) estoppelEstoppel does not applyDecided for petitioner

    “When deciding whether issue preclusion applies, we consider whether: (1) a prior action presents an identical issue; (2) the prior action actually litigated and adjudged that issue; (3) the judgment in that prior action necessarily required determination of the identical issue; and (4) the Apple, Inc., 909 F.3d 1375, 1377 (Fed. Cir. 2018) (citing Stephen Slesinger, Inc. v. Disney Enterprises, Inc., 702 F.3d 640, 644 (Fed. Cir. 2012)).” slip op. at 10

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We found in the Decision on Institution that Patent Owner’s definition was generally consistent with Petitioner’s definition, with the exception of requiring 3 years or more (as opposed to 2 to 3 years) of work experience in wireless communication systems and, for the purpose of institution, we adopted Petitioner’s provided definition for the level of skill of a person of ordinary skill in the art as reasonable and consistent with the prior art. Dec. on Inst. 8–9. The record does not contain further argument or evidence regarding the level of skill of one of ordinary skill in the art, and we again adopt Petitioner’s definition, which does not encompass an open-ended (“at least 3 years”) amount of experience and which is supported by the testimony of Dr. Houh. We would reach the same conclusions if we were to remove the open-ended terminology from Patent Owner’s definition and adopt that definition.” slip op. at 14

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “b) Our Conclusion We conclude that the proper construction of “digital representation of a . . . set of radio resources” is not limited to and does not necessarily include configuration information that is required to or used to reconfigure remote radio units.” slip op. at 16

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “We do not need to construe “packetizing” because collateral estoppel prevents Patent Owner from arguing that Wu does not disclose “packetizing” as explained below. We also do not need to construe any other terms to resolve the disputes before us. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms ... that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng'g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 19

  Patent outcomesUS 10,334,499 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,334,499
• Arkema Inc. / Arkema France v. Honeywell International Inc.All claims unpatentable
  PTAB · Aug 25, 2022 · PGR2016-00012 · APJ Sheldon M Mcgee · PGR · Remand

  Claims 1–20 are unpatentable under § 102(a) for prior public use; the Board did not reach the remaining anticipation, obviousness, and enablement grounds.

  RulingsRemand decision

  • RemandOther

    “On October 1, 2019, the Federal Circuit held that we “abused [our] discretion by assuming the authority that 35 U.S.C. § 255 expressly delegates to the Director: to determine when a Certificate of Correction is appropriate,” and vacated our Final Written Decision. Honeywell Int’l Inc. v. Arkema Inc., 939 F.3d 1345 (Fed. Cir. 2019). The Federal Circuit instructed us to “authorize Honeywell to file a motion seeking leave to petition the Director for a Certificate of Correction.” Id. at 1351. Pursuant to the Federal Circuit’s mandate, we gave our authorization, and Patent Owner filed its Motion for Leave to Request a Certificate of Correction. PGR11 Paper 61; PGR12 Paper 41. After additional briefing from the parties was complete, we granted Patent Owner’s Motion. PGR11 Paper 77; PGR12 Paper 57. Patent Owner filed its Request for a Certificate of Correction, as well as a Petition to Accept [Unintentionally] Delayed Claim to Priority under 35 U.S.C. § 120 and 37 C.F.R. § 1.78. PGR11 Ex. 2174; PGR12 Ex. 2172.” slip op. at 3

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “Synthes USA, LLC v. Spinal Kinetics, Inc., 734 F.3d 1332, 1344 (Fed. Cir. 2013). And, although there are no bright-line rules for the amount of disclosure needed in an unpredictable art, that amount “necessarily changes with each invention” and “changes with progress in the field.” Ariad, 598 F.3d at 1351. Here, we find that the art of AAC was unpredictable and that a heat-transfer composition for AAC required specific technical features that were unpredictable and unexpected. Thus, we conclude that the ’525 application requires a more-detailed disclosure than would be required in a predictable field to adequately demonstrate possession of a heat-transfer composition consisting essentially of HFO-1234yf and PAG for use in AAC. (iii) Disclosure in the ’525 Application With these background findings in mind, we now turn to the four corners of the ’525 application—and we find that the ’525 application does not contain the detailed disclosure needed in this case to reasonably convey possession of a heat-transfer composition consisting essentially of HFO- 1234yf and PAG for use in AAC.” slip op. at 37

  • Skill levelSkill level board ownDecided for patent owner

    “develops new refrigerants for use as heat transfer fluids. Ex. 1002 ¶ 149. Such a person would have had a Ph.D. in Chemistry, Chemical Engineering, Mechanical Engineering, Material Science, or a related field or discipline and at least 3 to 5 years of experience, or alternatively an M.S. degree and 5 to 10 years of experience. Id. Patent Owner’s Declarant, Dr. Bivens, provides a similar description of the person of ordinary skill in the art, stating that such a person would have a B.S. degree in Chemical Engineering or Chemistry, and five years of work experience, or a Ph.D. or M.S. degree and 2–3 years of experience. Ex. 2001 ¶ 23. Based on these descriptions, we find that the parties’ definitions of ordinary skill in the art are substantially the same, and agree with the parties that an ordinarily skilled artisan would be educated in the Chemical and Chemical Engineering arts or related disciplines. We also agree with the parties that a person having less formal education, such as a B.S. or M.S. degree, would require more years of experience than a person with more formal education, such as a Ph.D., to qualify as an ordinarily skilled artisan. We also find that neither party states how any difference in the parties’ articulated levels of skill impacts this proceeding. Thus, our analysis would be the same regardless of any minor differences between the parties’ respective articulations. Finally, we note that the level of ordinary skill in the art is reflected by the prior art of record. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 20

  • Novelty / Anticipation (§102) › Prior-art status of a reference › On-sale bar (Pfaff, Helsinn)UnpatentableUnpatentable

    “Tr. 114:15–115:18 (emphases added). Thus, we find that Patent Owner does not contest that a heat-transfer composition consisting essentially of HFO- 1234yf and PAG for AAC was in public commercial use before the March 26, 2014, filing date of the ’017 patent. Accordingly, we find that Petitioner’s evidence, together with Patent Owner’s concessions, demonstrates by a preponderance of evidence that the claimed subject matter of the ’017 patent was in commercial use before its March 26, 2014, effective filing date. See Ex. 1002 ¶¶ 399–409. In particular, as to claims 1, 3–10, 12, 13, and 15–20, we credit Dr. Brown’s uncontested testimony that the refrigerant-lubricant AAC composition of the Ford Transit Custom Bus, the Mazda CX 5 (2.0i and 2.2D), and the Opel Mocca used HFO-1234yf and a PAG lubricant as early as 2012. Ex. 1002 ¶ 399 (citing Ex. 101324, 2, 38, 55, 70). We also credit Dr. Brown’s 24 Behr Hella Services, Refrigerant and Oil Filling Quantities Passenger Cars & Commercial Vehicles 2014–15. PGR12 Ex. 1013. (“Service Guide”). PGR12 Ex. 1013. The Service Guide provides tables setting forth specifications for refrigerant type, refrigerant quantity, vehicle manufacturers’ original equipment compressor oil type, and oil filling quantity for the air-conditioning system of each vehicle listed in the tables. Id. at 2–3. Petitioner and Dr. Brown direct us to the Sevice Guide’s entries calculations, which show that the Ford Transit Custom Bus had an AAC refrigerant-lubricant composition of 26.7% of PAG lubricant and 73.3% of HFO-1234yf (Ex. 1002 ¶ 401 (citing Ex. 1013, 38)); the Mazda CX 5 2.0i had 16.7% PAG lubricant and 83.3% HFO-1234yf (Ex. 1002 ¶ 402 (citing Ex. 1013, 55)); the Mazda CX 5 2.2D had a 17.5% PAG lubricant and 82.5% HFO-1234yf (id.); and the Opal Mocca had 11.6% PAG lubricant and 88.4% HFO-1234yf (Ex. 1002 ¶ 402 (citing Ex. 1013, 70)). As to dependent claims 2, 11, and 14, which all require that the lubricant is present “in an amount from about 30% to about 50% weight,” we credit Dr. Brown’s uncontested testimony that the refrigerant-lubricant composition of the Ford Transit Custom Bus recited lubricant amount. Ex. 1002 ¶ 403. In particular, we agree with Dr. Brown that, because the lubricant accounts for 26.7% of the AAC refrigerant-lubricant composition in the Ford Transit Custom Bus, the lubricant makes up “about 30%” of the refrigerant-lubricant composition as claimed. Id. For these reasons, we find that Petitioner has met its burden to show that claims 1–20 are unpatentable for anticipation under § 102(a)(1).” slip op. at 55

  Patent outcomesUS 9,157,017 unpatentable
  § 102 anticipation§ 112 disclosure
  Patents in suitUS 9,157,017

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.