- Honeywell International Inc. v. DSM IP Assets B.V.Institution deniedPTAB · Aug 21, 2024 · IPR2024-00493 · APJ Erica A Franklin · IPR · Institution
The Board denied institution because Honeywell did not show a reasonable likelihood that claims 1–9 were unpatentable over any of its three obviousness combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Accordingly, we determine that Petitioner has not shown a reasonable likelihood of prevailing in its obviousness challenge of independent claim 1 or dependent claims 2–9 over the combination of Simmelink and Section 73.1015.” slip op. at 23
- Skill levelOther
“PHOSITA) at the time of the ’532 patent “would have had at least a Bachelor’s degree in the field of chemistry, chemical engineering, polymer chemistry, or materials science and at least three years of relevant work experience in the field of high strength fibers.” Pet. 8 (citing Ex. 1003 ¶ 18). Petitioner adds that individuals with different educational backgrounds could still be of ordinary skill in the art if they have “additional experience [that] compensates for a deficit in their education and experience stated above.” Id. According to Patent Owner, a person or ordinary skill in the art, would have (i) a bachelor’s degree in chemistry, polymer chemistry, materials science, chemical engineering, or biomedical engineering and (ii) three years of experience in designing and manufacturing gel-spun UHMWPE yarns. At this level of skill, a PHOSITA would have a detailed understanding of the information provided in the Technology Background, Section II, supra, including (i) the differences between linear HDPE and UHMWPE, (ii) the history underlying Section 73.1015 and the early failures of the 1960s-era blue, melt-extruded polyethylene sutures, (iii) why the molecular orientation of polyethylene molecules leads to strong yarns in the special case of gel-spun UHMWPE, and (iv) the challenges associated with coloring gel-spun UHMWPE yarns, especially for end-use medical applications. Prelim. Resp. 33–34. We note that the parties’ proposed definitions are largely similar, except that Patent Owner additionally recognizes a Bachelor’s degree in biomedical engineering and requires experience in designing and manufacturing gel-spun UHMWPE yarns. In any event, we do not need to the same under either proposed definition.” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed patent owner constructionDecided for patent owner
“a skilled artisan would have understood that the “gel spinning” process recited in the claims requires the use of a solvent during the spinning process. Indeed, the Specification describes this term, as follows: Gel spinning is understood to include at least the steps of spinning filaments from a solution of ultra-high molecular weight polyethylene in a spin solvent; cooling the filament obtained to form a gel filament removing at least partly the spin solvent from the gel filament; removing at least partly the spin solvent from the gel filament; and drawing the filament in at least one drawing step before during or after removing spin solvent. Ex. 1001, 2:31–37. We recognize the inventor’s lexicography as dispositive with respect to the meaning of the term “gel spinning.” See Phillips v. AWHCorp., 415 F.3d 1303, 1316 (Fed. Cir. 2005); SciMed Life Sys., Inc. v. Advanced Cardiovascular Sys., Inc., 242 F.3d 1337, 1343–44 (Fed. Cir.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for patent owner
“Claim 1 describes gel spinning as the manner by which the filaments comprised in the claimed colored multi-filament yarn are obtained. This, on its face, is a product-by-process claim element because it describes the filament structure being obtained in a particular way, i.e., by gel spinning. See Kamstrup A/S v. Axioma Metering UAB, 43 F.4th 1374, 1382 (Fed. Cir. 2022) (agreeing with the Board that “cast in one piece” is a product-by-process claim element as it describes the structure being cast “in a particular way”). For this element to be limiting, it must impart “structural and functional differences” that distinguish the claimed product from the prior art. See Amgen Inc. v. F. Hoffman-La Roche Ltd, 580 F.3d 1340, 1365–67 (Fed. Cir. 2009). Patent Owner argues persuasively that gel spinning imparts structural and functional differences to the claimed product because the process “creates overlap between polyethylene molecules within the UHMWPE filaments that maximizes the intermolecular Van der Waals interactions, resulting in highly crystalline filaments with high tensile strength.” Prelim. Resp. 38, 22 (citing Ex. 1014, 62–66). According to Patent Owner, “the structure of the gel spun UHMWPE is substantially different from other types of UHMWPE such as compression-molded and ram-extruded UHMWPE used to make joint replacements and other orthopedic implants.” Id. at 38.” slip op. at 9
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,280,532 - Apple Inc. v. RJ Technology, LLCInstitutedPTAB · Aug 20, 2024 · IPR2024-00597 · APJ Jon B Tornquist · IPR · Institution
The Board instituted review of claims 1–18 on all asserted grounds and granted Apple’s motion to join IPR2023-01183.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Having considered the arguments and evidence presented by Petitioner, we determine that Petitioner has demonstrated a reasonable likelihood of prevailing on at least one of the challenged claims of the ’641 patent. Accordingly, we institute an inter partes review as to all the challenged claims of the ’641 patent on all the grounds of unpatentability set forth in the Petition. And, for the reasons set forth below, we grant Petitioner’s Motion for Joinder.” slip op. at 2
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“In considering a motion for joinder, and whether such joinder is appropriate, the Board may consider “whether a new ground of unpatentability is raised in the second petition, how the cost and schedule of the first proceeding will be impacted if joinder is granted, and whether granting joinder will add to the complexity of briefing and/or discovery.” Patent Trial and Appeal Board Consolidated Trial Practice Guide November 20197 at 76 (citing Kyocera Corp. v. SoftView LLC, IPR2013-00004, Paper 15 at 4 (PTAB Apr. 24, 2013)).” slip op. at 9
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. at 11–12 (citing Ex. 1002 ¶¶ 50–51). Upon review of the prior art of record and the Petitioner’s arguments, we adopt Petitioner’s uncontested definition of the person of ordinary skill in the art for purposes of this Decision as it appears consistent with the ’641 patent and the prior art of record.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner provides constructions for the terms “A method for improving . . . characterized in that,” “ratio of positive electrode material to negative electrode material as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V” (claim 5), “as calculated by a specific capacity with a charge voltage limited to 4.2 V” (claim 1), and “at least 7500 of capacity” (claim 11). Pet. 8–11. For purposes of this decision, we determine that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 8
Claim constructioncites Phillips · KSR · GrahamPatents in suitUS 7,749,641 - PTAB · Aug 14, 2024 · IPR2024-00207 · APJ Kevin C Trock · IPR · Institution
The Board instituted IPR on claims 1–25, 38, and 39 on all asserted grounds, finding a reasonable likelihood that Motorola would prevail on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). Under 35 U.S.C. § 314(a), we may not authorize an inter partes review unless the information in the petition and the preliminary response “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We therefore institute inter partes review as to all of the challenged claims of the ’249 patent and all of the asserted grounds of unpatentability in the Petition.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied
“The mixing operation described in Botha appears materially different than that described in Löppönen. The Office acknowledged in allowing the ’249 patent that in Löppönen’s mixed stream, “the user still hears only one group at a time.” Ex. 1003 at 32, 76–77. That does not appear to be the case in Botha. In Botha, the combination of a variety of audio streams [occurs] in such a way that each participant will hear all other participants’ voices except their own. This is known as an ‘N minus l’ mix- where ‘N’ represents the sum of all audio streams entering a[t] the core logic of the invention, and the ‘minus l’ portion refers to the subtraction of the current participant’s stream from the stream returned to them. Ex. 1004, 10:35–43. 3. Conclusion Based on the current record before us, we determine that Petitioner is not asserting the same or substantially the same art or arguments previously presented to the Office with respect to Botha (Ground 1). Accordingly, we decline to exercise our discretion to deny institution under 35 U.S.C. § 325(d).3 E. Prior Art References” slip op. at 21
- Skill levelSkill level petitioner adoptedDecided for petitioner
“According to Petitioner, a person of ordinary skill in the pertinent art: would have had at least a B.S. degree in electrical engineering, computer science, or a similar field, plus approximately three years of industry in networking or communication systems, in particular address interoperability between different types of networks and satellite communications. Pet. 7–8 (citing Ex. 1002 ¶ 68). Patent Owner “does not dispute the proposal provided by Petitioner as to who would qualify as a POSITA.” Prelim. Resp. 6. pre-AIA law applies. See Prelim. Resp. Accordingly, we cite to pre-AIA § 103(a). We regard Petitioner’s definition as consistent with the ’249 patent and the asserted prior art, and the definition is supported by the testimonial evidence. Therefore, for the purpose of this Decision, we adopt Petitioner’s description. C. Claim Construction” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“We agree with Petitioner that we can determine whether to institute trial without having to resolve Petitioner’s assertion of indefiniteness. See Samsung, 948 F.3d 1355 (question of indefiniteness “is simply another ground on which the claims might be challenged in an appropriate forum,” and “does not necessarily preclude the Board from addressing the patentability of the claims on section 102 and 103 grounds”). Independent claim 25 is directed to a system for providing a push-to- talk proxy media service, reciting a “means for receiving,” a “means for mixing,” and a “means for transmitting,” among other things. Ex. 1001, 25:51–64. Petitioner identifies the recited functions and provides corresponding structures for these “means for” limitations recited by claim 25 pursuant to 35 U.S.C. § 112 ¶ 6. Pet. 10–11. Patent Owner “maintains that the proposed constructions for these three claim terms are overly limiting since the specification provides support for a broader range of structures, at the least, and does not concede to the constructions provided by Petitioner.” Prelim. Resp. 6. It is not necessary for us to resolve the claim construction issues identified by the parties in order for us to determine whether to institute inter partes review of the ’249 patent. Accordingly, for purposes of this Decision and based upon the preliminary record, we decline to expressly construe any of the claim terms at this point in the proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017); Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999). This preliminary Decision, however, does not prevent the parties from proposing, presenting evidence, or arguing a same or different construction of the claims during trial. The parties are encouraged to present their claim construction arguments and evidence as permitted by our rules.2 A final claim construction will be determined after the close of all the evidence and after any oral hearing in this matter. D. Discretionary Denial – 325(d)” slip op. at 12
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 8,145,249 - PTAB · Aug 13, 2024 · IPR2024-00511 · APJ Scott Raevsky · IPR · Institution
The Board instituted review of all challenged claims on all asserted grounds, finding a reasonable likelihood of success on the Shaffer-Keller obviousness challenge.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless it is determined that there is a reasonable likelihood that the petitioner would prevail with respect to at least one of the claims challenged in the petition. After considering the parties’ arguments and evidence, and for the reasons set forth below, Petitioner demonstrates a reasonable likelihood of prevailing with respect to at least one of the challenged claims of the ’949 patent. Accordingly, we institute an inter partes review with respect to all challenged claims and grounds asserted in the Petition. 37 C.F.R. § 42.108(a).” slip op. at 2
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Other
“below, we agree with Petitioner on this record that the ’852 patent claims lack priority to the parent application, Shaffer. For example, paragraph 34 of the ’299 application11 resulting in the ’852 patent explains that “IS 102 (FIG. 1) can determine if the endpoint 104 adheres to the rules of transmission.” Ex. 1004 ¶ 34. This paragraph does not state that any other device (such as the endpoint itself) receives a determination from the IS that the endpoint does not adhere to the rules of transmission. Figure 7, reproduced below, is similarly devoid of any such description: 11 U.S. App. No. 14/523,299 (Ex. 1004). The specification describes Figure 7 as “an example methodology that can facilitate dynamic communication between non-compatible communication devices.” Ex. 1004 ¶ 55. The specification further explains that “if the device demonstrates that it cannot comply with the behavioral characteristics of the interoperability system, the device can be attached to a VTG [virtual talk group] via a proxy,” in blocks 710 and 714 of Figure 7. Id. ¶ 56. But the ’299 application does not explain that this lack of compliance is communicated to any device, such as an endpoint.” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Petitioner also sets forth a rationale to combine Shaffer and Keller. Id. at 33–34. For example, Petitioner argues that Shaffer’s goal was to provide a way for incompatible endpoints to work using “standards-based IP technologies,” and Keller’s SIP protocol is an established “standards-based IP technolog[y]” for signaling in PTT. Id. at 33 (citing Ex. 1016 ¶ 2; Ex. 1002 ¶ 155). Petitioner asserts that a POSITA would have looked for an example of such a system, such as Keller’s SIP-based system, for a PTT system as in Shaffer. Id. at 33–34. Combining these systems therefore 15 This appears to be a typographical error, as Petitioner appears to be quoting Ex. 1024 ¶ 122. “would have been seen by a POSITA as nothing more than a combination of known elements according to their established functions to achieve an expected result, and would been considered to constitute nothing more than a routine engineering task that was well within the skill level of a POSITA,” Petitioner argues. Id. at 34 (citing Ex. 1002 ¶ 155). On this record, we agree with Petitioner that the combination of Shaffer and Keller discloses limitation [1c] and determine that Petitioner articulates a sufficient rationale to combine these references.” slip op. at 15
- Skill levelSkill level petitioner adoptedOther
“Petitioner asserts that a person of ordinary skill in the art (“POSITA”) would have had “at least a bachelors’ degree in electrical engineering, computer science, or a similar field, plus approximately three years of industry in networking or communication systems, in particular address interoperability between different types of networks and satellite communications,” and that “[a]dditional education in the fields of electrical engineering or computer science, such as a masters or doctorate degree, could substitute for professional experience in the field.” Pet. 14–15. Petitioner adds that “[a] person with less or different education but more relevant practical experience, or vice versa, may also meet this standard.” Id. at 15. Patent Owner does not dispute Petitioner’s proposal. Prelim. Resp. 7. Based on the current record, we accept Petitioner’s description of an ordinarily skilled artisan as consistent with the ’852 patent and the asserted prior art.” slip op. at 6
Claim construction§ 103 obviousnesscites GrahamPatents in suitUS 9,319,852 - Nespresso USA, Inc. v. K-Fee System GmbHInstitutedPTAB · Jun 25, 2024 · IPR2024-00299 · APJ James J Mayberry · IPR · Institution
The Board instituted review of claims 1–8 based on a reasonable likelihood that claim 1 is obvious over Yoakim, Jarisch ’929, Rossi, and Rapparini.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute review. 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4(a) (2023) (permitting the Board to institute trial on behalf of the Director). To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, upon considering the Petition, Preliminary Response, and evidence of record, we institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“Petitioner contends that a person of ordinary skill in the art would have had “a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, and experience with sensors for recognizing an identifier.” Pet. 16 (referencing Ex. 1003 ¶ 40; IPR2022-01574, Paper 12, 15). Patent Owner does not dispute Petitioner’s characterization of the level of ordinary skill in the art of the ’910 patent. For purposes of this Decision, based on the prior art, the sophistication of the technology at issue, and Mr. Jobin’s Declaration testimony, we adopt Petitioner’s unopposed definition of the level of ordinary skill. The ’901 patent, as well as the prior art of record, includes systems that use identifiers on a capsule to control the operation of a beverage machine. See, e.g., Ex. 1001, 1:28–34 (“[T]he present invention . . . has an identifier, which allows to individualize the respective portion capsule.”); Ex. 1004 ¶ 25 (discussing the system’s “identification means”); Ex. 1006 ¶ 1 (“The present invention relates in particular to coding supports adapted to store information related to a capsule, capsules associated with/for embedding coding supports, reading and processing arrangements for reading and using such information for preparing a beverage.”); Ex. 1041, code (57) (“The process for controlling the operation of an edible-product making machine [includes] . . . recogni[zing] an” slip op. at 17
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their ordinary and customary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1312–14 (Fed. Cir. 2005) (en banc) (“We have frequently stated that the words of a claim ‘are generally given their ordinary and customary meaning.’” (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)).” slip op. at 18
- Obviousness (§103) › Analogous artAnalogous artOther
“a) Petitioner’s contentions Petitioner contends that Yoakim, Jarisch ’929, Rossi, and Rapparini are “analogous art in the field of portion capsule beverage extraction, each disclosing an invention that may be applied in automatic coffee/expresso machines.” Pet. 37 (referencing Ex. 1004 ¶¶ 2, 3; Ex. 1006 ¶¶ 1, 2; Ex. 1008 ¶ 1; Ex. 1041, 3; Ex. 1003 ¶ 220); cf. In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004) (“References within the statutory terms of 35 U.S.C. § 102 qualify as prior art for an obviousness determination only when analogous to the claimed invention.”). Patent Owner does not dispute this contention at this stage of the proceeding.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,554,910 - Databricks, Inc. v. R2 Solutions LLCInstitution deniedPTAB · Jun 11, 2024 · IPR2024-00659 · APJ Brian P Murphy · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that Pike, Pike with Chowdhuri, or Pike with Chowdhuri and MacLeod rendered claims 1–46 obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“We have jurisdiction under 35 U.S.C. § 314, which provides that an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Under § 314, the Board may not institute review on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359– 60 (2018). If the Board institutes a review, it will institute “on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a). Upon consideration of the Petition, the Preliminary Response, and the evidence of record, for the reasons set forth below, we conclude Petitioner does not demonstrate a reasonable likelihood that it would prevail in showing the unpatentability of at least one challenged claim of the ’610 patent. Accordingly, we do not institute an inter partes review of claims 1–46 of the ’610 patent.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Petitioner relies on conclusory reasoning grounded in hindsight to assert a POSITA would have found it obvious to include file names to identify the data in each of Pike’s input files “because it would have allowed for locating that data group in Pike’s system and understanding the data in that file.” Id. at 18 (citing Ex. 1005 ¶ 93).13 Petitioner then makes the leap that, by understanding the data in an input file, a MapReduce programmer would have had reason “to identify input files and write ‘application-specific’ map and reduce functions on those files.” Id. at 18–19 (citing Ex. 1002, 10:1–7, 11:28–47, 14:12–27; Ex. 1005 ¶ 93). The difficulty with Petitioner’s position is that neither Pike nor other cited references disclose, teach, suggest, or otherwise provide motivation to write application-specific map and reduce functions that process each input file by identifiable schema or data type, i.e., by “data group” as recited in claim 1. Pike teaches application-specific programming “to process the input data one record at a time” or “to generate its output data in the form of key/value pairs,” nothing more. Ex. 1002, 7:31–36; see Pet. 29 (citing same); Prelim. Resp. 40–41, 50–51, 56 (citing same). Petitioner’s posited file names for Pike’s input files, moreover, could not serve as the claimed “data group” mechanism to identify the data in each input file by schema (or data type) for separate map and reduce processing. Each of Pike’s 13 Linn Declaration paragraph 93 is substantially identical to Petitioner’s argument and does not add any further insight or analysis on this point. data blocks can include data from more than one input file, a portion of one input file, or an entire input file. Ex. 1002, 6:55–7:6; see also Prelim. Resp. 47 (“Pike’s ‘data blocks’ (purported ‘partitions’) can be entire ‘input files,’ parts of ‘input files,’ or parts of multiple ‘input files’”). Therefore, a file name for one input file could not uniquely identify all of the data within a given data block, which could include data from different input files. Id. We agree with Patent Owner’s reasoning and argument on this point as well. In sum, Petitioner fails to show sufficiently that a POSITA would have had reason or motivation to use input file names in Pike as “data group” identifiers, as recited in claim 1 of the ’610 patent. See KSR, 550 U.S. at 418 (obviousness requires “some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness”).” slip op. at 31
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentable
“We further agree with Patent Owner that Petitioner’s asserted motivation for tracking processed data “derived from a particular [input] file” to improve efficiency “by enabling a data set to be selectively reduced after it is mapped” (Pet. 35–36 (citing Ex. 1005 ¶ 119)), is speculative hindsight-based reasoning. Petitioner’s posited motivation is grounded in benefits residing in the ’610 patent, not in the prior art or knowledge of a POSITA. Prelim. Resp. 48. Petitioner’s evidence—Dr. Linn’s naked opinion that a POSITA “could” have used the identification of processed output file data as “derived from a particular file” to selectively reduce intermediate data (Ex. 1005 ¶ 119)—is unpersuasive for the reasons given above and legally insufficient. See Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.”).” slip op. at 35
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached
“reasonable likelihood of prevailing in its challenge to the patentability of any of claims 1–46 of the ’610 patent. Therefore, we deny institution of inter partes review of the challenged claims. We need not address Patent Owner’s argument for discretionary denial under 35 U.S.C. § 325(d) in view of our decision denying institution on the merits.” slip op. at 50
Claim construction§ 103 obviousnessDiscretionary denialcites PhillipsPatents in suitUS 8,190,610 - Cloudera, Inc. v. R2 Solutions LLCInstitution deniedPTAB · Jun 11, 2024 · IPR2024-00303 · APJ Brian P Murphy · IPR · Institution
The Board denied institution on the merits, finding that Pike and Pike with Chowdhuri, alone or with MacLeod, did not show a reasonable likelihood of rendering claims 1–46 unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Under § 314, the Board may not institute review on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359– 60 (2018). If the Board institutes a review, it will institute “on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a). Upon consideration of the Petition, the Preliminary Response, and the evidence of record, for the reasons set forth below, we conclude Petitioner does not demonstrate a reasonable likelihood that it would prevail in showing the unpatentability of at least one challenged claim of the ’610 patent. Accordingly, we do not institute an inter partes review of claims 1–46 of the ’610 patent.” slip op. at 2
- Skill levelSkill level board ownOther
“someone having “at least a bachelor’s degree in computer science or similar field, and approximately two years of industry or academic experience in a field related [to] performing data analytics and/or related data processing tasks.” Pet. 9 (citing Ex. 1005 ¶¶ 67–69; In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995)). Petitioner further asserts that work experience can substitute for formal education and additional formal education can substitute for work experience. Id. Patent Owner does not contest Petitioner’s definition for purposes of its Preliminary Response. Prelim. Resp. 14.” slip op. at 14
- Prior constructionPrior construction adoptedDecided for petitioner
“13–31; Ex. 1008, 10–19); Prelim. Resp. 10 n.1, 17 (citing Pet. 10; Ex. 1007, 24– 25); see also Paper 7, 2 (Updated Mandatory Notices).10 The parties each provided proposed constructions of “data group” and related arguments to the court. Id. The district court construed “data group” as “a group of data and a mechanism for identifying data from that group (e.g., a group identifier).” Ex. 1007, 23–25. Having reviewed the district court’s construction of “data group,” and given the parties’ application of that construction here, we apply the district court’s construction of “data group” for purposes of this Decision. See Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (claim terms “need only be construed ‘to the extent necessary to resolve the controversy’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Petitioner’s argument explicitly and implicitly relies on the teachings of the ’610 patent, not Pike or some other MapReduce reference or teaching, for the proffered motivation that a “POSITA would have understood,” “recognized,” or “found it obvious to implement” Pike’s MapReduce system to include input file names as the “data group” identifiers in claim 1 of the ’610 patent. See Pet. 17–18. Petitioner relies on conclusory reasoning grounded in hindsight to assert a POSITA would have found it obvious to include file names to identify the data in each of Pike’s input files “because it would have allowed for locating that data group in Pike’s system and understanding the data in that file.” Id. at 18 (citing Ex. 1005 ¶ 93).14 Petitioner then makes the leap that, by understanding the data in an input file, a MapReduce programmer would have had reason “to identify input files and write ‘application-specific’ map and reduce functions on those files.” Id. (citing Ex. 1002, 10:1–7, 11:28–47, 14:12–27; Ex. 1005 ¶ 93). The difficulty with Petitioner’s position is that neither Pike nor other cited references disclose, teach, suggest, or otherwise provide motivation to write application-specific map and reduce functions that process each input file by identifiable schema or data type, i.e., by “data group” as recited in claim 1. Pike teaches application-specific programming “to process the input data one record at a time” or “to generate its output data in the form of key/value pairs,” nothing more. Ex. 1002, 7:31–36; see Pet. 27 (citing same); Prelim. Resp. 39–40, 49–50, 55 (citing same).” slip op. at 31
Claim construction§ 103 obviousnessDiscretionary denialcites PhillipsPatents in suitUS 8,190,610 - Nespresso USA, Inc. v. K-Fee System GmbHInstitution deniedPTAB · Jun 10, 2024 · IPR2024-00239 · APJ Jon B Tornquist · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–20 would have been obvious over either asserted combination.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, Petitioner does not demonstrate a reasonable likelihood of prevailing with respect to any of claims 1–20 of the ’094 patent. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“The express language of the claim, however, does not support using the “central axis” as the measuring point for determining if one object is laterally offset from another. For example, the term “central axis” is not used in the relevant claim phrase and the dictionary definitions of “lateral” relied upon by Petitioner and Mr. Jobin to show the ordinary meaning of the claim term do not suggest that the “central axis” is the reference point for determining whether a first object is “laterally offset” from a second object. As such, we determine that the claim language supports Patent Owner’s construction requiring that the “groove” be “off to the side” of the entire mandrel, and not merely the “central axis” of the mandrel. Prelim. Resp. 54. We must also resolve whether the entire groove is required to be laterally offset from the chamfered mandrel, or only a portion of it. On this point, the claims do not use the term “portion,” but rather specify that the “groove” is “laterally offset from the chamfered mandrel.” Ex. 1001, 14:4– 5, 15:19–20. This suggests that the entire “groove” must be offset from the “chamfered mandrel.”” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“That argument, however, does not explain why it would have been obvious to laterally offset the groove of Yoakim from the chamfered mandrel. Rather, as demonstrated by Mr. Jobin’s testimony, this argument relates to the general use of a sealing member in a groove, to the extent it was ultimately determined that such a configuration is not expressly disclosed in Yoakim. Id.; Ex. 1003 ¶ 296 (“It would have been obvious to one skilled in the art to position a sealing member in a groove to solidify the between counter-force portion 161 and engaging portion 157 in Figure 35 of Yoakim is more appropriately identified as the claimed “groove.” Prelim. Resp. 60–61. We need not resolve this issue, however, as Petitioner does not persuasively demonstrate that either potential “groove” is “laterally offset” from the chamfered mandrel. placement of the seal and improve its sealing stability and strength. Furthermore, it would have been obvious to one skilled in the art to utilize a groove and seal configuration in the brewing head . . . .”) (emphasis added). Even if we interpret the recited portion of the Petition as an argument for placing the groove entirely to the side of the mandrel in Yoakim, the Petition does not persuasively explain why one of ordinary skill in the art would have sought to do so. In Figure 35 of Yoakim, the seal and groove, as well as an elastic loading means, act as a valve means to control the level of pressure exerted in the capsule and “optimize interaction of water and the ground coffee particles to obtain a good extraction of the coffee and aroma compounds.” Ex. 1004 ¶¶ 370–372, 382, 396–398, 434–436, 445; Ex. 1003 ¶¶ 286–290; Pet. 63. These are the same beneficial properties relied upon by Petitioner to support the proposed combination, and Petitioner does not persuasively explain why one of ordinary skill in the art would have modified Yoakim in order to achieve results that are already obtained in the identified embodiment. Pet. 63. In view of the foregoing, we determine that Petitioner does not demonstrate a reasonable likelihood that claims 1 and 12 would have been obvious over the combined disclosures of Yoakim, Jarisch 929, and Rossi.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,542,094 - PTAB · May 24, 2024 · IPR2023-00861 · APJ Christopher M Kaiser · IPR · Remand
The Board denied institution because Petitioner did not show a reasonable likelihood that any challenged claim was unpatentable under any asserted ground.
RulingsRemand decision- RemandOther
“Accordingly, the Director instructed us to “determine whether Petitioner has demonstrated that Figure 1 of Godefroy ‘is clear on its face’ or would have reasonably suggested the placement of Godefroy’s sacrificial anode ‘within 10 inches’ of the hot liquid inlet.” Id. at 9. “In making this determination,” the Director instructed us to “consider whether the expert testimony provides sufficient ‘technical detail, explanation, or statements supporting why the expert determines that the feature in question was required or would have been obvious based on the prior art disclosure.’” Id. In addition, although the Director’s decision “is limited to [our] application of Hockerson to the grounds in the Petition involving Godefroy,” the Director instructed us also to “consider what effect, if any, this decision has on the other asserted grounds.” Id. Finally, the Director instructed us to “set forth [our] interpretation” of “the limitation ‘within 10 inches of a hot liquid inlet to the radiator.’” Id. at 8 n.4.” slip op. at 4
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“original decision, the Director’s decision, and the evidence currently of record, we determine that Petitioner has not shown a reasonable likelihood that it will prevail in showing that at least one of the challenged claims is unpatentable. Accordingly, we do not institute an inter partes review of any challenged claim based on any ground asserted in the Petition. IV. ORDER For the reasons given, it is: ORDERED that, pursuant to 35 U.S.C. § 314, the Petition is denied, and no inter partes review is instituted.” slip op. at 19
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“evidence. The challenged claims require that a sacrificial anode be placed within a certain distance—10 inches—of the hot liquid inlet, and, because the inlet has some non-zero size, it might be possible for an anode to be within that distance from some parts, but not from all parts, of the inlet. Accordingly, specifying the center axis of the inlet as the point from which to measure the distance to the anode improves on the plain words of the claim in terms of achieving the claim’s objective of placing the anode within a specified distance of the inlet. Moreover, when discussing the distance from the inlet to the anode, the specification of the ’494 patent uses the language “within 10 inches in any direction of the center axis of the inlet connection.” Ex. 1001, 7:61–64. Thus, the intrinsic evidence supports adopting Petitioner’s claim construction. Petitioner’s declarant, Dr. Medlin, relies on Petitioner’s proposed construction. See, e.g., Ex. 1004 ¶¶ 20 (noting that the construction “within 10 inches of the center axis of [a] hot liquid inlet” “ha[s] been adopted by Petitioner”), 96 (“the sacrificial anodes contained in each of the turbulators 2 would be placed within 10 inches of a center axis of a hot liquid inlet to the radiator of Tomosada”), 144 (“A POSITA would understand from Figure 1 that the sacrificial anode 14 is within 10 inches of a center axis of a hot liquid inlet”), 267 (“These teachings would further motivate a POSITA to located the sacrificial anode 12 within 10 inches of a center axis of the hot liquid inlet.”). This support for Petitioner’s proposed construction provides further reason for us to adopt it. Because it is supported by the intrinsic evidence of record, because Patent Owner proposes no alternative construction, and because Petitioner’s expert supports it, we adopt the construction of “within 10 inches of a hot liquid inlet to the radiator” that Petitioner proposes. Thus, we construe this term as “within 10 inches of the center axis of a hot liquid inlet to the radiator.” In other words, when discussing the distance between a hot liquid inlet and a sacrificial anode, we interpret “hot liquid inlet” as “center axis of the hot liquid inlet.”” slip op. at 5
- BurdenNot shown unpatentable
“Inherency may be relied upon in arguing either anticipation or obviousness. Schering, 339 F.3d at 1377 (applying inherency in an anticipation context); Par Pharma. Inc. v. TWI Pharma., Inc., 773 F.3d 1186, 1195–96 (Fed. Cir. 2014) (applying inherency in an obviousness context). In both cases, however, “[t]he mere fact that a certain thing may result from a given set of circumstances is not sufficient.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010). Instead, “the limitation at issue necessarily must be present, or the natural result of the combination of elements expressly disclosed by the prior art.” Par Pharma., 773 F.3d at 1195–96. Here, Petitioner has not shown sufficiently that, in Godefroy, the sacrificial anode necessarily is placed within 10 inches of the center axis of the hot liquid inlet. Dr. Medlin testifies that Figure 1 of Godefroy shows that “an entirety . . . or at least a significant portion of the sacrificial anode 14, is within 10 inches of a center axis of the inlet.” Ex. 1004 ¶ 144. But we cannot say that Figure 1 of Godefroy is clear on its face, or reasonably suggests, that this is necessarily the case. There are no dimensions shown on Figure 1, so it is unclear from the figure what the diameter of pipe 12 is. If that diameter is larger than 20 inches, then it simply is untrue that “sacrificial anode 14 is . . . necessarily placed within 10 inches of a center axis of a hot liquid inlet to the radiator,” as Dr. Medlin testifies. Id. ¶ 361. As noted above, neither Petitioner nor Dr. Medlin relies on the hot liquid inlet of Godefroy having any particular diameter, and Godefroy is silent as to the diameter of its inlet. Pet. 69–70; Ex. 1004 ¶¶ 144, 359–361, 381–382, 406–408; Ex. 1008, 1–15. Moreover, as Patent Owner notes, there is a wide range of sizes of radiators, including automobile radiators, available. Prelim. Resp. 3–5; Exs. 2001–2003. In the absence of any testimony or other evidence that tends to show that radiator inlet pipes necessarily have diameters less than 20 inches, Petitioner has not shown sufficiently that the diameter of Godefroy’s inlet pipe is small enough to ensure that any portion of the anode necessarily is within 10 inches of the center axis of the inlet.” slip op. at 11
Claim constructioncites Phillips - Canon U.S.A., Inc. / Canon Inc. v. Slingshot Printing LLCAll claims unpatentablePTAB · May 20, 2024 · IPR2022-01541 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–7, 9, 10, 20–22, and 24 are unpatentable as obvious over Hamafuku, Whitman, and Imanaka, with Cleland added for claim 5.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Upon review of the prior art of record, we determine that no claim terms require construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Upon review of the prior art of record, we adopt Petitioner’s definition of a person of ordinary skill in the art as it is consistent with the prior art of record, but note that neither party contends the outcome of this case depends on whether a person of ordinary skill could include an individual with a degree in Materials Science.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“In this case, there was a known desire to increase nozzle pitch in inkjet printheads, Imanaka’s heater and nozzle configuration had been used in the art to achieve this goal, and there is no suggestion that combining the teachings of Hamafuku, Whitman, and Imanaka was beyond the skill of an ordinarily skilled artisan. See Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1381 (Fed. Cir. 2023). Thus, we credit the testimony of Mr. Curley that one of ordinary skill in the art would have sought to use Imanaka’s heater and nozzle pitch in Hamafuku in order to provide a more compact and higher density printhead. Ex. 1002 ¶¶ 404–05. A conclusion of obviousness requires a reasonable expectation of success. Intelligent Bio-Systems, Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1365 (Fed. Cir. 2016). This inquiry asks whether one of ordinary skill in the art would have had a reasonable expectation of combining the references to achieve what is claimed in the patent-at-issue. Id. at 1367. The inquiry does not look to whether unclaimed elements or functions would or would not also be achieved, or whether “one would reasonably expect the prior art reference to operate as those references intended once combined.” Id.” slip op. at 42
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“As noted by Patent Owner, the components of Imanaka are made of silicon-based materials, manufactured using thin film technology. PO Resp. 53–54 (citing Ex. 1008, 6:50–61). We are not persuaded, however, that Imanaka’s preference for silicon-based materials would teach away from, or otherwise discourage, one of ordinary skill in the art from combining Hamafuku, Whitman, and Imanaka. Imanaka does not suggest that failure to use silicon-based materials would result in an inoperable device. Rather, Imanaka states that use of silicon-based materials may “improve the mechanical characteristics” and “reliability” of “the liquid discharge head.” Ex. 1008, 6:50–61. Given the considerable increase in printhead nozzle pitch and print resolution provided by Imanaka’s heater and nozzle pitch configuration, we are not persuaded that a failure to capture the same improvement in mechanical characteristics and reliability from the use of silicon-based materials would prevent one of ordinary skill in the art from implementing Imanaka’s nozzle pitch in Hamafuku and Whitman or counsel against this modification.” slip op. at 41
Patent outcomesUS 7,152,951 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,152,951
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.