- Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentablePTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision
Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed
“on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17
- Strike new argumentNew argument disregardedDecided for patent owner
“In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22
Patent outcomesUS 11,333,007 mixedClaim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites GrahamPatents in suitUS 11,333,007 - PTAB · Dec 8, 2025 · IPR2025-01064 · APJ George R Hoskins · IPR · Institution
The Board instituted IPR of claims 1–18 on all four §103 grounds, finding a reasonable likelihood that Volkswagen would prevail on at least claim 1 over Weese.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“A. Legal Standards — Petitioner’s Burden “In an [inter partes review], the petitioner has the burden from the onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the 1 Amendments to 35 U.S.C. § 103 enacted by the Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”) took effect in March 2013. The ’353 patent issued from an application filed in September 2004. See Ex. 1001, code (22). Thus, we apply the pre-AIA version of § 103. grounds for the challenge to each claim”)). This burden of persuasion never shifts to the patent owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015). B. Legal Standards — Obviousness A patent claim is unpatentable under 35 U.S.C. § 103(a) if the differences between the claimed subject matter and the prior art are such that the subject matter, as a whole, would have been obvious at the time the invention was made to a person having ordinary skill in the art to which said subject matter pertains. KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). The question of obviousness is resolved on the basis of underlying factual determinations including: (1) the scope and content of the prior art; (2) any differences between the claimed subject matter and the prior art; (3) the level of ordinary skill in the art; and (4) objective evidence of nonobviousness, if made available in the record, which has not happened here. See Graham v. John Deere Co., 383 U.S. 1, 17–18 (1966).” slip op. at 6
- Skill levelSkill level petitioner adoptedDecided for petitioner
“C. Level of Ordinary Skill in the Art Petitioner contends a person having ordinary skill in the art pertaining to the ’353 patent “would have possessed at least a four-year degree in physics, biophysics, medical physics, or a related field, and two years of experience in developing and/or applying computed tomography methods,” wherein “[a]dditional education and professional experience are interchangeable.” Pet. 1; Ex. 1003 ¶¶ 54–55. “Patent Owner utilizes Petitioner’s proposed level of skill in the art.” Prelim. Resp. 2. For purposes of this Decision, we adopt Petitioner’s formulation of ordinary skill in the art, as it appears to be consistent with the ’353 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Expert testimonyOther
“unpatentable as having been obvious over Weese, including supporting testimony from Dr. Peterson. See Pet. 17–22, 26–83; Ex. 1003 ¶¶ 138–149, 159–257. Patent Owner opposes. See Prelim. Resp. 1–2, 6–7. We conclude Petitioner has demonstrated a reasonable likelihood of prevailing on its assertions, as follows.” slip op. at 13
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“(iii) Analysis Based on the present record, we determine Petitioner’s contentions regarding the third step of claim 1 are supported sufficiently by the cited disclosures in Weese and Dr. Peterson’s testimony to justify institution of review. In particular, Weese describes obtaining a plurality of second images of the patient’s internal organs (i.e., PET image I0 in Fig. 1, and PET image I10 in Fig. 3) using a second imaging technique (i.e., PET). See Ex. 1005, Figs. 1, 3, and 6, ¶¶ 47–49, 58–59, 72. In particular, PET image I0 in Figure 1 may be a reconstructed “volume image[]” composed of a plurality of “quasi two-dimensional” “slice images” that, when combined, represent a three-dimensional region inside the patient. Id. ¶¶ 48, 58, 61; see also Pet. 56–57. PET image I10 in Figure 3 may be a similarly reconstructed volume image composed of a plurality of slice images.4 See 4 We do not rely here on Petitioner’s alternative theory that Weese discloses a “plurality” of second images because PET images I0 and I10 are “superposed” images encompassing “several states of motion.” Pet. 58. Ex. 1005 ¶¶ 61, 83–84. Patent Owner’s sole opposition to Petitioner’s assertions in this regard are limited to whether Weese “obtain[s]” PET images I0 and I10 as recited in claim 1, which we address below. Also, it appears that PET images I0 and I10 are obtained while also obtaining second movement measurements of the patient’s internal organs using a second sensor system (i.e., motion acquisition unit 12 and motion sensor 15 / S1) which is independent from the PET imaging technique. See Ex. 1005, Figs. 1 and 6, ¶ 65 (“[T]he respiratory motion is determined during the acquisition of the PET projections P1 by means of a respiratory motion sensor provided on the patient and therefrom the frequency function f(r) or, more generally, a state of motion function F1 is derived for the construction of the motion model M2.”). Furthermore, Weese describes how frequency function f(r) is utilized to facilitate image comparison between CT and PET images at common motion states. See id. ¶¶ 31, 49–51, 70–71, 75–77, 79–80, 83; see also Ex. 1003 ¶¶ 214–216 (Dr. Peterson’s supporting testimony). Patent Owner’s sole opposition to Petitioner’s assertions in this regard are limited to whether Weese “obtain[s]” PET images I0 and I10 as recited in claim 1, which we address below. Patent Owner’s two opposing arguments are unavailing, based on the present preliminary record. First, Petitioner relies on reconstructed PET images I0 and I10 as satisfying the “plurality of second images” recited in claim 1, not PET projections P1 from which PET images I0 and I10 are derived. See, e.g., Pet. 56, 58 (“I0 and I10 disclose and render obvious a ‘plurality of second images’ in two ways” — “I0 and I10 may be ‘volume images’ formed using ‘known’ techniques,” and “I0 and I10 are ‘superposed’ PET images encompassing ‘several states of motion,’ which” slip op. at 18
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 8,265,353 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentablePTAB · Dec 2, 2025 · IPR2024-01052 · APJ Brian D Range · IPR · Final written decision
Claims 1, 2, 7–12, and 17–20 are unpatentable as obvious; claims 3–6 and 13–16 were not shown unpatentable because the asserted Watanabe combinations were unsupported.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–38). Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute and applies Petitioner’s proposed level of skill. PO Resp. 6. We find that Petitioner’s proposal is reasonable and consistent with the ’832 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). Thus, we apply Petitioner’s proposal in our analysis.” slip op. at 13
- Prior constructionPrior construction adoptedDecided for petitioner
“In our Institution Decision, we construed “determin[ing] a viewing window for the visual content as a function of progress through the progress length” as “requiring determining a viewing window for different times of the video.” Inst. Dec. 21. Neither party disputes this construction. PO Resp. 7; Pet. Reply 1–7. We maintain this same construction.” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“Thomason are in the same field of endeavor. Thomason describes a camera and method for correctly orientating pictures from the camera. See, e.g., Ex. 1004 ¶¶ 1, 2 29–40, Figs. 3a–3b. In particular, Thomason is interested in rotating and cropping images to reduce the effect of poor orientation. Pet. 9 (citing Ex. 1004 ¶¶ 2, 34, 36). Pacurariu likewise describes aligning and resizing/cropping of a captured image to correct poor orientation. See, e.g., Ex. 1005 ¶¶ 1, 3, 45–56, Figs. 5A–5C. The preponderance of the evidence also supports that a person having ordinary skill in the art would have had reason to combine the Pacurariu’s teachings with Thomason to predictably improve Thomason. Thomason teaches correct rotation of video data and makes use of rotation sensor to correct rotated images. Pet. 19–21 (citing, e.g., Ex. 1004 ¶¶ 4, 27, 29, 35; Ex. 1002 ¶¶ 76–77). Pacurariu similarly uses sensors and measures tilt angle of the camera. Id at 21–22 (citing, e.g., Ex. 1005 ¶¶ 51–52, Fig. 6; Ex. 1002 ¶ 78). Pacurariu further teaches that its tilt data angle can be stored for each “video frame.” Id. at 22 (citing Ex. 1005 ¶ 52). Petitioner, with support from credible testimony of Dr. Katsaggelos, explains how the teachings of Thomason and Pacurariu could be successfully combined. Id. at 23 (citing, for example, Ex. 1002 ¶ 81). A person of ordinary skill in the art could have known that Thomason’s system could be improved by saving rotation data for each video frame and correcting images on a frame-by-frame basis. Id. at 23–24. The testimony of Dr. Katsaggelos is credible in this regard. Ex. 1002 ¶¶ 80–81. Petitioner and Dr. Katsaggelos explain the references’ teachings and, based on these teachings, assert that a person having skill in the art would have had reason to combine with reasonable expectation of success based on those teachings. Reason to combine may properly come from the references themselves. KSR Int’l Co., 550 U.S. at 418 (explaining reason to combine may come from “interrelated teachings of multiple patents”). Based on the evidence presented, Petitioner establishes by a preponderance of the evidence that a person having ordinary skill in the art would have had reason to combine the teachings of Thomason and Pacurariu with a reasonable expectation of success. Ex. 1002 ¶¶ 76–81, 89–92; Ex. 1004 ¶¶ 4, 8–9, 27, 29, 35; Ex. 1005 ¶¶ 26, 41, 46, 51–52, 55–57, Figs. 6, 7.” slip op. at 27
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for patent owner
“evaluating nexus between the claimed invention and objective evidence of nonobviousness, also referred to as secondary considerations. Lectrosonics, Inc. v. Zaxcom, Inc., IPR2018-01129, Paper 33 at 33 (PTAB Jan. 24, 2020) (precedential). We first consider whether Patent Owner has demonstrated “that its products are coextensive (or nearly coextensive) with the challenged claims,” resulting in a rebuttable presumption of nexus. Id. at 33. If not, that “does not end the inquiry into secondary considerations”; “the patent owner is still afforded an opportunity to prove nexus by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. (quoting Fox Factory, 944 F.3d at 1373–75).” slip op. at 62
Patent outcomesUS 11,336,832 mixedClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,336,832 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentablePTAB · Nov 26, 2025 · IPR2024-00984 · APJ Nabeel U Khan · IPR · Final written decision
Claims 6 and 7 are unpatentable as obvious over Meulen and Chao; claim 1 was not shown unpatentable because Meulen does not disclose transforming an image captured by its camera.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that a person of ordinary skill in the art in the relevant field “would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras,” or alternatively “would have four years of experience working on image or video processing, or digital cameras.” Pet. 6. Petitioner further argues that an “advanced graduate degree” may “make up for the work experience.” Id. (citing Ex. 1002 ¶¶ 33–34). “Patent Owner applies Petitioner’s proposed level of skill.” PO Resp. 4–5 (citing Ex. 2027 ¶¶ 19–20). We adopt Petitioner’s proposed level of ordinary skill because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’413 patent and the cited prior art.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“From the outset we note that the words of the claim recite “non- uniformly shift[ing] the pixels” and do not recite a “non-linear” transformation. This favors Petitioner’s position, which is based directly off the definition of “non-uniform,” over Patent Owner’s position, which substitutes “non-linear” for “non-uniform.” Generally, then, we would determine the ordinary and customary meaning of the claim term in the context of the entire Specification. Here, however, the ʼ413 patent does not mention “uniform” or “non-uniform” shifting of pixels anywhere except in the claims. The Specification, therefore, provides limited guidance, by itself, as to the ordinary and customary meaning of the term. Nonetheless, even reviewing the portions of the Specification cited by the parties, we see no clear or unambiguous effort to limit the challenged claims to require only non-linear transformations in which the pixels to which a transformation is applied do not have the same amount of shift. is not non-linear. Pet. Reply 1. Specifically, Petitioner argues that the center circle of Figure 2B maintains the original circular shape after the transformation is applied to the image which contradicts Patent Owner’s argument that no two pixels will have the same amount of shift. Pet. Reply 1–2. We agree. In Figure 2B of the ʼ413 patent, the center of the image is chosen to be the region of interest. Ex. 1001, 4:19–21. After the input image goes through linear scaling (step 204) and then non-linear warping (step 206) the circles become more vertically compressed as they approach the top and bottom edges and more horizontally stretched as they approach the left and right edges. Id. at 4:22–30. But “the center circle is fully corrected so that it maintains the original circular shape of the corresponding circle in the input image 212.” Id. at 4:23–25. This means that at least some pixels, such as those of the center circle, undergo the same amount of shift after being transformed.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“readable instructions” of claims 1 and 2 must occur in a particular order. Specifically, Patent Owner argues that the step of “determine a portion within the input image” must occur after “obtain[ing] an image” and before “apply[ing] a transformation to the input image.” PO Resp. 17 (citing Ex. 2027 ¶ 59). Petitioner argues, on the other hand, that the specification does not require such an order and, in fact, describes an embodiment where such an order is not followed. Pet. 3. We determine that the “determine a portion within the input image” step does not need to occur after the “obtain an image” step and before the “apply a transformation to the input image” step. As Patent Owner itself points out, claims 1 and 2 are apparatus and system claims respectively, and an ordering of the limitations of such claims is not necessary. PO Resp. 17. Even if we were to treat the apparatus and system claims as reciting the steps of a method, “as a general rule the claim is not limited to performance of the steps in the order recited, unless the claim explicitly or implicitly requires a specific order.” Baldwin Graphic Systems, Inc. v. Siebert, Inc., 512 F.3d 1338, 1345 (Fed. Cir. 2008) (citing Interactive Gift Express, Inc. v. Compuserve Inc., 256 F.3d 1323, 1342–43 (Fed. Cir. 2001)). We see nothing in the claims that would cause us to break this general rule. Patent Owner argues that the claims imply a “specific order because the ‘determine a portion’ requirement operates on ‘the [obtained] input image’ and defines the ‘portion’ that is necessary for the 23; Ex. 2027 ¶ 59). Although the steps are recited in a specific order in the claim, as they necessarily must be, the claim does not expressly specify that the certain steps must occur before or after other instructions, nor does logic imply such a requirement. For example, if certain characteristics of the image are known before the image is obtained (e.g. the size, dimensions, resolution, aspect ratio, or content etc.) the determination of the portion of the image could be made before the image is obtained. These characteristics may be based on the specific device taking the image or the subject matter of the image, both of which may be known before the image is captured or obtained. It is, therefore, not necessary that the image be obtained in order for a portion of the image to be determined. Similarly, we do not find the written description to expressly or implicitly specify an order the claimed step of “determine a portion of the input image.” For example, the written description of the ʼ413 patent states that in Figure 2B “the center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction as the frame boundary is approached.” Ex. 1001, 4:19–22. Patent Owner emphasizes that this disclosure implies that an input image is obtained before the center portion is chosen. PO Resp. 19 (citing Ex. 1001, 3:63–64, 4:19–22). But the description of this embodiment does not expressly recite an order. For example, the description of Figure 2A explains that “an input image is obtained” in step 202, “the image is then scaled” in step 204, and a “non-linear warping is then applied” in step 206. Ex. 1001, 3:63–4:3. This description does not mention “determin[ing] of a portion of the image” as a separate step or as part of the listed steps, and therefore, does not specify an order in which this step must occur. is configured so that some areas of the image are fully corrected geometrically, while some other areas are distorted. . . . [T]he center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction.” Id. at 4:17–19. This excerpt from the ʼ413 patent, which the Patent Owner specifically relies on (PO Resp. 19), also does not specify an order in which the determination step (choosing of the region of interest) takes place. Moreover, because the ʼ413 patent states that the warp module is configured so that some areas are fully corrected while others are not, the determination step could take place at the time the warp module was configured, presumably before the image was obtained. Finally, the ʼ413 patent states that “in the case, of video, the area may dynamically change between images (e.g. to follow a moving object).” Ex. 1001, 4:34–36. Patent Owner argues that this description “requires first obtaining the image in order to locate the object that is being followed.” PO Resp. 19–20. This embodiment is related to the case of video or a moving object, which the challenged claims do not mention. We, therefore, decline to limit the scope of the claim based on this embodiment. Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2005) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“Having reviewed the parties’ arguments and cited evidence we determine Petitioner has established, by a preponderance of the evidence, that a POSITA would have been motivated to combine Meulen and Chao. For example, Petitioner argues that “[i]t would have been obvious that when performing image scaling, pixels from the input to output positions are shifted based on a scaling factor.” Pet. 91. Meulen teaches scaling but does not provide the details regarding scaling. E.g., Ex. 1007, 1:55–56, 4:37–49. We agree that in light of Meulen’s disclosure of scaling, a POSITA would have looked to other references, such as Chao, for further details on how to perform scaling. Dr. Katsaggelos provides credible support, testifying that “Meulen mentions ‘compression and/or scaling,’ and provides details on how to perform compression. But Meulen does not disclose the details of how to perform scaling. A POSITA when faced with Meulen and having the knowledge about scaling would have been motivated to turn to a prior art reference that discloses the details of scaling.” Ex. 1002 ¶ 262. Patent Owner argues that Petitioner provides no motivation to combine other than asserting that it involves combining prior art elements. PO Resp. 35 (quoting Pet. 92). As explained above, however, Petitioner does more than just assert that the motivation involves combining prior art elements. Instead, Petitioner explains that Meulen discusses both compression and scaling, and provides details regarding compression but does not provide details on how to scale. Pet. 91–92; Ex. 1002 ¶¶ 262–262. Thus, Meulen teaches that scaling was a known technique. See Hybritech, (“a patent need not teach, and preferably omits, what is well known in the art”). Dr. Katsaggelos testifies that, in this situation, a POSITA would have looked to Chao for details regarding scaling. Ex. 1002 ¶¶ 262–263. We determine this establishes, by a preponderance of the evidence, that a POSITA would have had reason to combine Meulen’s teachings with Chao. Patent Owner draws a distinction between Meulen and Chao, arguing that “Meulen is concerned with modifying content from a media source to be displayed on a device’s screen while Chao, by contrast, is directed to changing the aspect ratio of a document intended for printing.” Id. at 36 (citing Ex. 2027 ¶¶ 89–90). Patent Owner’s argument is contradicted, however, by Chao’s disclosure which states that “after all the background and foreground elements in the image have been resized . . . [t]he image may be output by displaying the image on or as part of: a display screen such as a computer monitor, camera screen, printer screen, printed page, projected image, or the like.” Ex. 1008 ¶ 32. Patent Owner argues that Meulen’s system avoids distortion near the middle where the user’s focus is more likely to be, while Chao, on the other hand, is directed to avoiding distortion of stylized borders on differently sized pages. PO Resp. 36–37 (citing Ex. 1006, 1:26–29; Ex. 1008 ¶¶ 1, 25; Ex. 2027 ¶¶ 91–92). This argument reads the prior art too narrowly and does not address Petitioner’s combination. Petitioner does not rely on Chao for its teaching of avoiding distortion near the borders of the image, but rather on its teaching of scaling the image while maintaining the design intent of the original image. Ex. 1008 ¶ 22; Ex. 1014 ¶ 67. Thus, Petitioner is applying Chao’s techniques of scaling (regardless of where the area of 92. Finally, Patent Owner argues that Chao’s approach of stretching/shrinking only the background and uniformly scaling entire foreground objects is suitable for graphic design but incompatible with Meulen which is concerned with adapting externally derived media source content for display on a fixed size screen. PO Resp. 37–38 (citing Ex. 2027 ¶ 93). We disagree with Patent Owner’s argument because it does not address Petitioner’s combination. Petitioner relies on Chao’s teaching of stretching/shrinking of background elements and applies that stretching/shrinking to Meulen’s images displayed on its screen. Pet. 91–92 (citing Ex. 1008 ¶¶ 28, 63; Ex. 1002 ¶ 263). The fact that Chao applies its teaching to graphic design does not prevent a POSITA from applying those teachings to Meulen’s media content displayed on its screen.” slip op. at 20
Patent outcomesUS 10,015,413 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,015,413 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentablePTAB · Nov 25, 2025 · IPR2024-01165 · APJ William V Saindon · IPR · Final written decision
Claims 1–21 were not shown unpatentable because Zhou does not teach the claimed low-light high-pass or stickiness parameter limitations.
RulingsFinal written decision- BurdenFwd all claims patentableNot shown unpatentable
“4. Conclusion for the Prior Art Analysis In sum, we find that Zhou does not disclose the low-light high-pass parameter or the stickiness parameter. Petitioner’s grounds for both independent claims 1 and 16 rely on Zhou for teaching a low-light high-pass parameter or a stickiness parameter. Pet. 23–28, 64. Because we find Zhou does not teach these limitations, all of Petitioner’s grounds fall for this reason. III. CONCLUSION For the reasons given above, we determine that Petitioner has not established by a preponderance of the evidence that any claim of the ’840 patent would have been obvious in view of the prior art cited.” slip op. at 18
- Skill levelSkill level petitioner adoptedOther
“A person of ordinary skill in the art (POSITA) in the field of the ’840 patent would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras. Alternatively, a POSITA would have four years of experience working on image or video processing, or digital cameras. An advanced graduate degree in the disciplines cited above may make up for the work experience indicated above. Pet. 6 (citing Ex. 1002 ¶ 32). Patent Owner applies the same standard. PO Resp. 26–27. We use this agreed-upon standard for purposes of this Decision.” slip op. at 7
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“We review this testimony based on the strength of the underlying factual basis. 37 C.F.R. § 42.65(a); Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985) (“Lack of factual support for expert opinion going to factual determinations, however, may render the testimony of little probative value . . ..”). Here, the underlying factual basis is not very strong for either witness. That said, we find that Dr. Foroosh’s testimony is more logically sound and consistent with the ’840 patent disclosure. Based on our reading of the specification, we find a clear indication that “stickiness” has to do with the past. In order to control “the extent by which preceding portion(s) . . . impacts determination of the smoothed trajectory” (emphasis added), one must control the degree by which the past frames impact determination. And to control the degree of the past’s influence, one must, as a consequence, favor the past over the future. That is, the frame of reference of the stickiness parameter is the past. The specification could have used a time-agnostic term, like a “nearness” or “adjacency” parameter, but it did not. Thus, the fact that “stickiness” is used in conjunction with “preceding” indicates that it deals with a preference for preceding frames. On this basis, we find Dr. Katsaggelos’s testimony less persuasive than Dr. Foroosh’s.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“That said, we do not construe a stickiness parameter as prohibiting consideration of future frames. Instead, we determine that the stickiness parameter’s value determines the impact of the preceding portions, versus the following portions. The ’840 patent recognizes this, when it says that a stickiness parameter value of “1,” representing a “lazy” stabilizer that maximally favors the past, would not override a violation of the margin constraint based on the look-ahead (i.e., would not allow the viewing window to fall out of bounds in the event of large future motion). See Ex. 1001, 22:26–30; see also id. at 12:61–13:29 (acknowledging that favoring the past may lead to a conflict with the viewing window determination), 15:39–60 (adjusting the viewing window to ensure it does not violate a margin constraint). Thus, while a past-favoring parameter by necessity favors the past over the future, it does not prohibit consideration of the future. In view of the above, we construe the claimed “stickiness parameter” as a parameter that controls the extent by which preceding portions of the trajectory impacts determination of the smoothed trajectory, with an understanding that in order to favor preceding portions, to some extent, the parameter must relatively disfavor following portions.” slip op. at 10
Patent outcomesUS 10,958,840 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,958,840 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentablePTAB · Nov 25, 2025 · IPR2024-01164 · APJ William V Saindon · IPR · Final written decision
Claims 1–21 were not shown unpatentable because Shi does not disclose the claimed low-light high-pass parameter required by the asserted obviousness grounds.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Given the teachings of the specification, we agree with Patent Owner that a low-light high-pass parameter is a parameter of a smoothing function that favors high frequencies (high pass) when exposure times are long (low light). See Tr. 42:10–18 (Patent Owner’s counsel stating that “high-pass” means “there’s a bias or preference for high frequencies”); Ex. 2020, 93:23– 94:15 (Petitioner’s declarant, Dr. Katsaggelos, agreeing that a high-pass system attenuates the low frequency of a signal). Although we acknowledge Petitioner’s position that the specification provides other ways or considerations in implementing a smoothing function, based on our above analysis of the specification, we find that the specification describes the lowlight high-pass parameter as a specific component of a smoothing function. See, e.g., Ex. 1001, 21:17–25 (setting out several parameters besides the low-light high-pass parameter used in trajectory smoothing).” slip op. at 10
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“position and a real device position. Id. at 18:27–40. In other words, the blur is addressed by analyzing the image to identify motion and then shifting the image. Shi, however, does not disclose how its parameter is based on low light (or the long exposure times indicative of low light). In its Petition, Petitioner asserts that a person of ordinary skill in the art would understand that “blurs can be caused by low light conditions.” Pet. 28 (citing Ex. 1003 ¶ 111). Although this is true, that does not mean that Shi’s blurs are identified by a parameter that considers low light. As we just described, Shi identifies the blur by quantifying the amount of motion of the points in an image, not by identifying low light. This is simply a different way to determine the presence of motion blur. In Shi, blur is measured, whereas in the ’840 patent, it is inferred based on low-light conditions (e.g., by observing the exposure time). See, e.g., Ex. 1007, 18:7– 26; Ex. 1001, 19:12–26. In its Reply, Petitioner does not point to any further disclosures. Accordingly, we find that Shi does not disclose the “low-light” aspect of the claimed low-light high-pass parameter. This is sufficient to determine that Petitioner’s ground does not meet all claim limitations. Similarly, we find that Shi does not disclose the “high-pass” aspect of the parameter. Shi’s blur compensation uses a spherical interpolation to modify the image. Ex. 1007, 18:27–40. The low-light high-pass parameter, as we have construed the term, allows more high frequencies. To allow more high frequencies, this necessarily means either allowing fewer low frequencies, or allowing more high frequences as opposed to some counterfactual situation in which fewer high frequencies were going to be allowed. See Ex. 2020, 94:23–95:15; Ex. 2022. We are directed to no persuasive evidence from Petitioner that Shi’s spherical interpolation favors high frequencies over low frequencies. Accord Ex. 2018 ¶ 107 (Patent Owner’s expert stating that Shi’s spherical interpolation “reintroduce[es] both high- and low-frequency motion”). Even if Shi allows the viewing window to track the camera position “consistent with the natural blur in the image” (Ex. 1007, 17:63–67), we are not provided with sufficient evidence to conclude by a preponderance of the evidence that providing a similar visual goal as a high-pass parameter (Ex. 1001, 22:16–18, “the output motion may include high frequencies that mask motion blur”) is the same as having a high-pass parameter. Again, merely preserving high frequencies is not the same as having a “high-pass parameter” because, as construed, a “high-pass parameter” also involves some degree of attenuation of low frequencies or relative increase of high frequencies. Accordingly, we find that Shi does not disclose the “high-pass” aspect of the claimed low-light high-pass parameter.” slip op. at 18
Patent outcomesUS 10,958,840 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,958,840 - Vizio, Inc. / LG Electronics, Inc. et al. v. Multimedia Technologies Pte. Ltd.All claims unpatentablePTAB · Nov 19, 2025 · IPR2025-00300 · APJ Sharon Fenick · IPR · Final written decision
Claims 1–12 are unpatentable as obvious over either of two combinations: Kim, TechnoBuffalo, MissingRemote, Hunt, and Hunleth; or Kim, Ma, Hunt, and Hunleth.
RulingsFinal written decision- Expert testimonyPetitioner expert creditedDecided for petitioner
“An expert witness must be qualified as an expert by knowledge, skill, experience, training, or education to testify in the form of an opinion. Fed. R. Evid. 702. We deem Dr. Houh to have the requisite qualifications to provide opinion testimony, including obtaining “a Ph.D. in Electrical Engineering and Computer Science from MIT, where his research focused on building high-speed networks and developing applications for remote video capture, processing, and display—technologies central to the ’384 Patent.” Pet. Reply 29 (citing Ex. 1003 ¶¶ 7, 10–13). The Board has broad discretion to assign weight to be accorded expert testimony. Yorkey v. Diab, 601 F.3d 1279, 1284 (Fed. Cir. 2010). Dr. Houh’s industry experience establishes that he at least possesses ordinary skill in the art, and we do not disqualify his testimony. See Ex. 1003 ¶¶ 7, 10–13. We consider the factors raised by the parties in weighing his testimony with other evidence provided, including the facts and data on which it is based, in reaching our determinations here.” slip op. at 12
- Skill levelSkill level petitioner adoptedDecided for patent owner
“A person of ordinary skill in the art (“POSITA”) in August of 2012 would have been knowledgeable and familiar with [user interfaces] in consumer products that are pertinent to the ’384 Patent. A POSITA would have had a bachelor’s degree in Electrical, Software, or Computer Engineering, or equivalent training, and approximately two years of experience working in the field of television and/or digital video systems, human-computer interaction, or related technologies. Lack of professional experience can be remedied by additional education, and vice versa. Pet. 15 (citing Ex. 1003 ¶ 21). Patent Owner agreed with and adopted this definition. PO Resp. 18; Ex. 2002 ¶ 40. The definition proposed by Petitioner is consistent with the problems and solutions in the ’384 patent and prior art of record and is supported by expert testimony. We adopt this definition.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“As neither the claim language nor the specification provides the necessary support for a construction requiring exclusion of specific information from either view, we decline to adopt such a construction. Omega Eng’g, Inc. v. Raytek Corp., 334 F.3d 1314, 1323 (Fed. Cir. 2003) (claim constructions that exclude a particular element must find support either in the words of the claim or through “express disclaimer or independent lexicography in the written description that would justify adding that negative limitation.”). As reviewed above, the claim language and specification, while describing different things that would be present in elements could not be common to both views. To the extent Patent Owner’s proposed construction specifies elements to be excluded, we find no support for these exclusions, and in fact, find opposite language in the specification of the ’384 patent: while Patent Owner proposes that a detail view must not include “information that is associated with a series,” the specification describes a detail view as provided in the case where “a series with only a single episode” has been selected. Ex. 1001, 44:64–65. This is consistent with the possibility in the claims that a detail view may relate to “a single show.” Ex. 1001, 56:66, 57:36, 58:51. As discussed, the claims recite that a detail view is provided “if [a] selection . . . is for one of a movie or single show” and that the detail view “presents information about a selected item of the VOD content” and a that a digest view is provided “if the selection in the collection view is for a series” and that digest view “provides a listing of two or more episodes associated with a series.” See, e.g., Ex. 1001, 57:23–27, 57:31–37. Thus, by the language of the claims themselves, the provision of “either a detail view or a digest view” relates to the received third selection and is based on what that selection was. The “either . . . or” in the claim thus relates directly to the third selection and not to the resulting views. This is consistent with Dr. Surati’s testimony. See Ex. 2002 ¶ 67 (The claims “present[] the third selection as a binary choice: either the third selection is a series (in which case the digest view is presented), or the third selection is a movie or single show (in which case the detail view is presented).” While Patent Owner insists that the language and logic of the claim “excludes providing a view that can be both a detail view and a digest view,” (PO Resp. 21) we determine that this proposed negative limitation finds no support through the Therefore, we decline to adopt the proposed claim construction that further limits the plain language of the claims. Having rejected the proposed limitations on the plain language of the claims, we find that no further construction of the claim language is required in order to address the dispute before us. See Nidec Motor Corp., 868 F.3d at 1017.” slip op. at 25
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“Patent Owner does not dispute Petitioner’s assertions regarding the combination of Kim, TechnoBuffalo, MissingRemote, Hunt, and Hunleth, including Petitioner’s assertion that one of ordinary skill in the art would have been motivated to make this combination and would have had a reasonable expectation of success in doing so. We determine that Petitioner has sufficiently shown one of ordinary skill in the art would have combined and used the details regarding a content provider user interface provided in TechnoBuffalo, MissingRemote, Hunt, to provide details relating to the user interfaces provided by a CP provider on an intelligent television, such as that of Kim. See Ex. 1003 ¶¶ 104–106, 109–110, 112. We additionally determine that Petitioner has shown a reasonable likelihood that it will prevail in showing that one of ordinary skill in the art would have been motivated to make this combination, and would have had a reasonable expectation of success in doing so. See id. ¶¶ 113– 119.” slip op. at 38
Patent outcomesUS 9,578,384 unpatentableClaim construction§ 103 obviousnesscites Phillips · Markman · KSR · GrahamPatents in suitUS 9,578,384 - Vizio, Inc. v. Multimedia Technologies Pte. Ltd.All claims unpatentablePTAB · Nov 19, 2025 · IPR2024-00723 · APJ Sharon Fenick · IPR · Final written decision
Claims 1–12 are unpatentable as obvious under §103 over either Kim, TechnoBuffalo, MissingRemote, Hunt, and Hunleth, or Kim, Ma, Hunt, and Hunleth.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“As neither the claim language nor the specification provides the necessary support for a construction requiring exclusion of specific information from either view, we decline to adopt such a construction. Omega Eng’g, Inc. v. Raytek Corp., 334 F.3d 1314, 1323 (Fed. Cir. 2003) (claim constructions that exclude a particular element must find support either in the words of the claim or through “express disclaimer or independent lexicography in the written description that would justify adding that negative limitation.”). As reviewed above, the claim language and specification, while describing different things that would be present in elements could not be common to both views. To the extent Patent Owner’s proposed construction specifies elements to be excluded, we find no support for these exclusions, and in fact, find opposite language in the specification of the ’384 patent: while Patent Owner proposes that a detail view must not include “information that is associated with a series,” the specification describes a detail view as provided in the case where “a series with only a single episode” has been selected. Ex. 1001, 44:64–65. This is consistent with the possibility in the claims that a detail view may relate to “a single show.” Ex. 1001, 56:66, 57:36, 58:51. As discussed, the claims recite that a detail view is provided “if [a] selection . . . is for one of a movie or single show” and that the detail view “presents information about a selected item of the VOD content” and a that a digest view is provided “if the selection in the collection view is for a series” and that digest view “provides a listing of two or more episodes associated with a series.” See, e.g., Ex. 1001, 57:23–27, 57:31–37. Thus, by the language of the claims themselves, the provision of “either a detail view or a digest view” relates to the received third selection and is based on what that selection was. The “either . . . or” in the claim thus relates directly to the third selection and not to the resulting views. This is consistent with Dr. Surati’s testimony. See Ex. 2002 ¶ 67 (The claims “present[] the third selection as a binary choice: either the third selection is a series (in which case the digest view is presented), or the third selection is a movie or single show (in which case the detail view is presented).” While Patent Owner insists that the language and logic of the claim “excludes providing a view that can be both a detail view and a digest view,” (PO Resp. 21) we determine that this proposed negative limitation finds no support through the Therefore, we decline to adopt the proposed claim construction that further limits the plain language of the claims. Having rejected the proposed limitations on the plain language of the claims, we find that no further construction of the claim language is required in order to address the dispute before us. See Nidec Motor Corp., 868 F.3d at 1017.” slip op. at 25
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“Patent Owner does not dispute Petitioner’s assertions regarding the combination of Kim, TechnoBuffalo, MissingRemote, Hunt, and Hunleth, including Petitioner’s assertion that one of ordinary skill in the art would have been motivated to make this combination and would have had a reasonable expectation of success in doing so. We determine that Petitioner has sufficiently shown one of ordinary skill in the art would have combined and used the details regarding a content provider user interface provided in TechnoBuffalo, MissingRemote, Hunt, to provide details relating to the user interfaces provided by a CP provider on an intelligent television, such as that of Kim. See Ex. 1003 ¶¶ 104–106, 109–110, 112. We additionally determine that Petitioner has shown a reasonable likelihood that it will prevail in showing that one of ordinary skill in the art would have been motivated to make this combination, and would have had a reasonable expectation of success in doing so. See id. ¶¶ 113– 119.” slip op. at 38
- Strike new argumentNew argument consideredDecided for petitioner
“Our rules provide that a petitioner must include “[a] full statement of the reasons for the relief requested, including a detailed explanation of the significance of the evidence including material facts, and the governing laws, rules, and precedent.” 37 C.F.R. § 42.22(a). Our rules also state that “[a] reply may only respond to arguments raised in the corresponding . . . patent owner response.” Id. § 42.23(b). “‘Respond,’ in the context of 37 C.F.R. § 42.23(b), does not mean proceed in a new direction with a new approach as compared to the positions taken in a prior filing.” PTAB Consolidated Trial Practice Guide (Nov. 2019)15 (“CTPG”), 74. A petitioner “may not submit new evidence or argument in reply that it could have presented earlier, e.g., to make out a prima facie case of unpatentability.” Id. at 73. “Examples of indications that a new issue has been raised in a reply include new evidence necessary to make out a prima facie case for the patentability or unpatentability of an original or proposed” slip op. at 49
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“We find that Petitioner has sufficiently shown that each of the TechnoBuffalo 1:09 view and the MissingRemote 1:54 view teaches or suggests the presentation of “information about a set of the VOD content that are associated with a series,” as recited. Petitioner sufficiently shows the TechnoBuffalo 1:09 view is a digest view as it presents the “year, rating, number of episodes . . . , [and] episode lengths” for the displayed series. See Pet. 42 (citing Ex. 1003 ¶ 165). Similarly, Petitioner sufficiently shows that MissingRemote 1:54 view presents episode titles about episodes in the displayed season. See id. at 44 (citing Ex. 1003 ¶ 171). Petitioner argues alternatively that each of these would have been presented upon selection of a series in its proposed combination. Pet. 42–43, 44. We determine, in both cases, that presenting information regarding multiple individual episodes to be a sufficient showing that each presents “information about a set of the 13 We note that, applying Patent Owner’s requested claim construction for “providing either a detail view . . . or a digest view . . .” in full would lead to the same result with respect to, for example, the TechnoBuffalo 1:09 view and the Missing Remote 1:54 view. Each of these teach “a view of information about a set of the VOD content that are associated with a series without information only about a single episode” (as they contain information regarding multiple episodes, see supra footnote 10 and PO Surreply 6) but not “a view of information about a single episode without information that is associated with a series.” Additionally, Petitioner persuasively argues that the prior art demonstrates that “a POSITA would have avoided using UI designs for a TV series to display a single movie, and vice versa. Pet. 49–50 (citing Ex. 1003 ¶¶ 183–184) digest view. Additionally, Petitioner sufficiently shows the presentation of a screen including information about a movie if a movie has been selected from a collection view, and information about a set of content associated with a series if a series was selected, as per the recitations of limitations 1.6 and 1.7 of claim 1. TechnoBuffalo and MissingRemote teach digest view screens relating to a series selection, Hunt and Hunleth teach information screens responsive to a movie or single show selection, and the combination and cited testimony support the provision of the appropriate screen in response to the user’s selection from a collection view, as detailed above with respect to Petitioner’s allegations.” slip op. at 44
Patent outcomesUS 9,578,384 unpatentableClaim construction§ 103 obviousnesscites Phillips · Markman · KSR · GrahamPatents in suitUS 9,578,384 - Apple Inc. v. Resonant Systems, Inc.All claims unpatentablePTAB · Oct 23, 2025 · IPR2024-00983 · APJ Norman H Beamer · IPR · Final written decision
Claims 1–6, 10, 17, 19, and 20 are unpatentable under § 103 over Alexander and Cosper; the alternative Gregorio-based grounds did not establish unpatentability.
RulingsFinal written decision- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for patent owner
“112(f). Williamson v. Citrix Online, LLC, 792 F.3d 1339, 1348 (Fed. Cir. 2015). But if the term does not use the word “means,” then it is presumed not to be subject to Section 112(f). Id. “That presumption can be overcome, but only if the challenger demonstrates that the claim term fails to recite sufficiently definite structure or else recites function without reciting sufficient structure for performing that function.” Samsung Elecs. Am., Inc. v. Prisua Eng’g Corp., 948 F.3d 1342 (Fed. Cir. 2020). “The correct inquiry, when ‘means’ is absent from a limitation, is whether the limitation, read in light of the remaining claim language, specification, prosecution history, and relevant extrinsic evidence, has sufficiently definite structure to a person of ordinary skill in the art.” Apple Inc. v. Motorola, Inc., 757 F.3d 1286, 1298 (Fed. Cir. 2014).” slip op. at 12
- Prior constructionPrior construction adoptedDecided for patent owner
“both parties have asserted in the Apple Litigation that the “control component” requirement is a means-plus-function limitation subject to 35 U.S.C. §112(f), despite the fact that the control component limitation does not recite “means for.” Pet. 3 (citing Ex. 1012, 3–8; Ex. 1013, 13); PO Resp. 6–7. Indeed, the court in the Apple Litigation has concluded that the control component requirement is subject to 35 U.S.C. § 112(f), and has construed that requirement accordingly: Function: receiving control signals input to the oscillating resonant module; receiving outputs from the one or more sensors; controlling oscillation of the mass to produce a vibration response according to the received control signals by generating, using one or more of the received sensor outputs, control outputs to an actuator that drives the mass to oscillate. Structure: a microcontroller, a processor, a microprocessor, or a CPU that performs the algorithm shown in Figure 45 or the algorithm described in the corresponding text. See, e.g., 31:19–32:13, and equivalents thereof. Ex. 2001, 10; Ex. 2002, 40. Because of the Apple Litigation record, Petitioner presents its challenges in the alternative, first applying a plain meaning approach to the control component requirement, and also analyzing the requirement under the construction adopted in the Apple Litigation. Pet. 3–5. We adopt the court’s construction in the Apple Litigation. 35 U.S.C.” slip op. at 11
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner’s expert declarant contends that person of ordinary skill in the art (POSITA) “would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of vibration-generating systems; additional years of experience could substitute for the advanced-level degree.” Ex. 1003 ¶ 27. Patent Owner offers “a similar level of ordinary skill in the art.” PO Resp. 2. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’882 patent specification.” slip op. at 9
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“(1) Analogous Art Our reviewing court has stated that “[t]wo separate tests define the scope of analogous prior art: (1) whether the art is from the same field of endeavor, regardless of the problem addressed and, (2) if the reference is not within the field of the inventor's endeavor, whether the reference still is reasonably pertinent to the particular problem with which the inventor is involved.” In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004) (citations and internal quotes omitted). While these two criteria are helpful in many instances, we must not lose sight of the key question at hand: what is “prior art” as that term is used in 35 U.S.C. § 103(a)? References that are “too remote to be treated as ‘prior art’” are excluded from the obviousness analysis. In re Sovish, 769 F.2d 738, 741, 226 (Fed. Cir. 1985). The non-analogous art test provides helpful insight on the underlying question of what is “prior art” within the meaning of the statute; we should not, however, be blind to the reality of the circumstances of the case before us. In re Wood, 599 F.2d 1032, 1036 (CCPA (1979). Nor should we adhere to rigid and mandatory formulas that overly limit the inquiry. KSR Int’l Co., 550 U.S. at 419.” slip op. at 22
Patent outcomesUS 11,152,882 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,152,882 - Alpinestars S.P.A. / Alpinestars USA Inc. v. Dainese S.P.A.Institution deniedPTAB · Oct 15, 2025 · IPR2025-00750 · APJ Benjamin D M Wood · IPR · Institution
The Board denied institution for claims 1–22 because Petitioner did not show a reasonable likelihood of prevailing on any of its three obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Because Petitioner has not shown a reasonable likelihood of establishing that one of ordinary skill in the art would have combined EP’536 (with or without Hatton) and CN’180 in the proposed manner, Petitioner has not shown a reasonable likelihood of prevailing with respect to claims 1 and 18. 5. Claims 2–17 and 19–22 Because Petitioner has not shown a reasonably likelihood of prevailing with respect to independent claims 1 and 18, Petitioner also has not shown a reasonable likelihood of prevailing with respect to the claims that depend therefrom (claims 2–17 and 19–22).” slip op. at 20
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner does not offer its own definition of the level of ordinary skill or dispute Petitioner’s definition. See generally Prelim. Resp. The level of ordinary skill in the art usually is evidenced by the references themselves. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). As Petitioner’s unchallenged description of an ordinarily skilled artisan appears consistent with the subject matter discussed in the references and that of the challenged claims, for purposes of this Decision we apply Petitioner’s description of a person of ordinary skill in the art.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other
“For purposes of our analysis, we need only address the meaning of “planar structure,” and only to note that this limitation requires that all portions of the casing body, when inflated against the first mesh portion, second mesh portion, and tie elements, “form a planar structure” when the casing body is inflated. This is evident from both the claim language and the written description of the ’065 patent. Limitation [1e] of claim 1 recites that in the inflated condition, “said portions of the casing body” are “inflated against said first mesh portion, said second mesh portion, and said tie elements.” We understand “said portions of the casing body” to refer to all of the portions of the casing body. Likewise, “said first mesh portion, said second mesh portion, and said tie elements” refers to the entire mesh structure recited in limitation [1a]. Thus, this limitation requires all of the casing-body portions to inflate against the entire mesh structure to form the “planar structure.” This reading is consistent with the Specification. The Specification teaches that “[t]he first mesh portion and the second mesh portion together with the tie elements determine with the casing body the final shape of the inflatable element,” which “can reach a generally flat and planar final shape.” Ex. 1001, 4:19–23; see also id. at 4:59–5:3 (teaching that the casing body inflated within the mesh structure results in a “globally planar structure”). Here, “inflatable element” refers to the entire structure because it is comprised of the mesh structure and casing body. Id. at 3:11–18. Thus, the entire structure, when inflated, is “generally flat and planar.”” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“portions of the casing body, when inflated against the first mesh portion, second mesh portion, and tie elements, “form a planar structure” when the casing body is inflated. This is evident from both the claim language and the written description of the ’065 patent. Limitation [1e] of claim 1 recites that in the inflated condition, “said portions of the casing body” are “inflated against said first mesh portion, said second mesh portion, and said tie elements.” We understand “said portions of the casing body” to refer to all of the portions of the casing body. Likewise, “said first mesh portion, said second mesh portion, and said tie elements” refers to the entire mesh structure recited in limitation [1a]. Thus, this limitation requires all of the casing-body portions to inflate against the entire mesh structure to form the “planar structure.” This reading is consistent with the Specification. The Specification teaches that “[t]he first mesh portion and the second mesh portion together with the tie elements determine with the casing body the final shape of the inflatable element,” which “can reach a generally flat and planar final shape.” Ex. 1001, 4:19–23; see also id. at 4:59–5:3 (teaching that the casing body inflated within the mesh structure results in a “globally planar structure”). Here, “inflatable element” refers to the entire structure because it is comprised of the mesh structure and casing body. Id. at 3:11–18. Thus, the entire structure, when inflated, is “generally flat and planar.”” slip op. at 10
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 12,012,065
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.